Rapid and simple method for DNA extraction from plant and algal species suitable for PCR amplification using a chelating resin Chelex 100

A DNA extraction method using Chelex 100 is widely used for bacteria, Chlamydomonas, and animal cell lines, but only rarely for plant materials due to the need for additional time-consuming and tedious steps. We have modified the Chelex 100 protocol and successfully developed a rapid and simple method of DNA extraction for efficient PCR-based detection of transgenes from a variety of transgenic plant and algal species. Our protocol consists of homogenizing plant tissue with a pestle, boiling the homogenized tissue in a microfuge tube with 5% Chelex 100 for 5 min, and centrifuging the boiled mixture. The supernatant, which is used for PCR analysis, was able to successfully amplify transgenes in transgenic tobacco, tomato, potato, Arabidopsis, rice, strawberry, Spirodela polyrhiza, Chlamydomonas, and Porphyra tenera. The entire DNA extraction procedure requires <15 min and is therefore comparable to that used for bacteria, Chlamydomonas, and animal cell lines.     

Blood puncture as a nondestructive sampling tool to obtain DNA in frogs: comparison of protocols and survival analysis

In molecular biology studies of Anura, nondestructive methods to obtain genetic material are needed as alternatives to toe clipping. This work evaluates a nondestructive method for sampling DNA from blood puncture, comparing the performance of three different extraction protocols (Qiagen Kit, Salting-out and Chelex). We collected 134 individuals of Eleutherodactylus johnstonei, extracting blood via puncture of the medial vein using commercial-grade glucometer lancets. We extracted 100-1880 ng DNA, finding no differences between the extraction protocols. We compared the quality of the resulting DNA through amplification and sequencing of the 16S mitochondrial gene. Amplification was successful for the three extraction protocols, although Chelex showed better performance, making it the most recommendable protocol for extraction of DNA from blood. The resulting sequences corresponded to those registered in the GenBank for this species. Additionally, we found no significant differences in survival or weight change between the individuals that were manipulated and a control group (mean survival 66.7% treated, 62.9% untreated). Data reveal that blood samples obtained by puncture are a convenient alternative to other tissues (phalange, buccal swab, liver) that have traditionally been used as DNA sources for anurans. The technique is applicable to small and large species, covering most anuran diversity, provides enough DNA for many genetic applications and produces no noticeable effect on the survival or performance, given that it does not affect the motor parts or the dexterity of the animals.     

A comparison of different protocols for RAPD analysis of Littorina

Randomly amplified polymorphic DNA (RAPD) is a fast and useful method of genome marking that is useful for studies of, for example, parentage, mating patterns, taxonomy of sibling species and intra-specific population genetic structures. Here we compare three different procedures for extracting high molecular weight genomic DNA; phenol-chloroform, hexadecyltrimethyl ammonium-bromide (CTAB) and Chelex 100. Double phenol-chloroform and CTAB extractions both generated high amounts of high quality DNA while Chelex 100 failed to do so. We also compared PCR-amplification with different concentrations of template DNA and found that 1–2 ng per 25 l of amplification cocktail gave the best results. Amplifying DNA prepared by the three extraction methods revealed that DNA extracted with double phenol-chloroform gave the clearest bands. The double phenol-chloroform extraction seems thus the most suitable extraction method for RAPD in Littorina, however Chelex may be the only method useful for extracting DNA from very small individuals, for example, pre-hatching stages.     

Nondestructive DNA sampling from bumblebee faeces

Genetic studies provide valuable data to inform conservation strategies for species with small or declining populations. In these circumstances, obtaining DNA samples without harming the study organisms is highly desirable. Excrements are increasingly being used as a source of DNA in such studies, but such approaches have rarely been applied to arthropods. Bumblebees are ecologically and economically important as pollinators; however, some species have recently suffered severe declines and range contractions across much of Western Europe and North America. We investigated whether bumblebee faeces could be used for the extraction of DNA suitable for genotyping using microsatellite markers. We found that DNA could be extracted using a Chelex method from faecal samples collected either in microcapillary tubes or on filter paper, directly from captured individuals. Our results show that genotypes scored from faecal samples are identical to those from tissue samples. This study describes a reliable, consistent and efficient noninvasive method of obtaining DNA from bumblebees for use in population genetic studies. This approach should prove particularly useful in breeding and conservation programs for bumblebees and may be broadly applicable across insect taxa.     

Whole genome amplification of Chelex-extracted DNA from a single mite: a method for studying genetics of the predatory mite Phytoseiulus persimilis

We developed and optimized a method using Chelex DNA extraction followed by whole genome amplification (WGA) to overcome problems conducting molecular genetic studies due to the limited amount of DNA obtainable from individual small organisms such as predatory mites. The DNA from a single mite, Phytoseiulus persimilis Athias-Henrot (Acari: Phytoseiidae), isolated in Chelex suspension was subjected to WGA. More than 1000-fold amplification of the DNA was achieved using as little as 0.03 ng genomic DNA template. The DNA obtained by the WGA was used for polymerase chain reaction followed by direct sequencing. From WGA DNA, nuclear DNA intergenic spacers ITS1 and ITS2 and a mitochondrial DNA 12S marker were tested in three different geographical populations of the predatory mite: California, the Netherlands, and Sicily. We found a total of four different alleles of the 12S in the Sicilian population, but no polymorphism was identified in the ITS marker. The combination of Chelex DNA extraction and WGA is thus shown to be a simple and robust technique for examining molecular markers for multiple loci by using individual mites. We conclude that the methods, Chelex extraction of DNA followed by WGA, provide a large quantity of DNA template that can be used for multiple PCR reactions useful for genetic studies requiring the genotypes of individual mites.     

Modified low‐salt CTAB extraction of high‐quality DNA from contaminant‐rich tissues

The increasing use of high‐throughput sequencing platforms has made the isolation of pure, high molecular weight DNA a primary concern for studies of a diverse range of organisms. Purification of DNA remains a significant challenge in many tissue and sample types due to various organic and inorganic molecules that coprecipitate with nucleic acids. Molluscs, for example, contain high concentrations of polysaccharides which often coprecipitate with DNA and can inhibit downstream enzymatic reactions. We modified a low‐salt CTAB (MoLSC) extraction protocol to accommodate contaminant‐rich animal tissues and compared this method to a standard CTAB extraction protocol and two commercially available animal tissue DNA extraction kits using oyster adductor muscle. Comparisons of purity and molecular integrity showed that our in‐house protocol yielded genomic DNA generally free of contaminants and shearing, whereas the traditional CTAB method and some of the commercial kits yielded DNA unsuitable for some applications of massively parallel sequencing. Our open‐source MoLSC protocol provides a cost‐effective, scalable, alternative DNA extraction method that can be easily optimized and adapted for sequencing applications in other contaminant‐rich samples.     

A Simple Chelex Protocol for DNA Extraction from Anopheles spp.

Endemic countries are increasingly adopting molecular tools for efficient typing, identification and surveillance against malaria parasites and vector mosquitoes, as an integral part of their control programs^1,2,3,4,5. For sustainable establishment of these accurate approaches in operations research to strengthen malaria control and elimination efforts, simple and affordable methods, with parsimonious reagent and equipment requirements are essential^6,7,8. Here we present a simple Chelex-based technique for extracting malaria parasite and vector DNA from field collected mosquito specimens.We morphologically identified 72 Anopheles gambiae sl. from 156 mosquitoes captured by pyrethrum spray catches in sleeping rooms of households within a 2,000 km² vicinity of the Malaria Institute at Macha. After dissection to separate the head and thorax from the abdomen for all 72 Anopheles gambiae sl. mosquitoes, the two sections were individually placed in 1.5 ml microcentrifuge tubes and submerged in 20 μl of deionized water. Using a sterile pipette tip, each mosquito section was separately homogenized to a uniform suspension in the deionized water. Of the ensuing homogenate from each mosquito section, 10 μl was retained while the other 10 μl was transferred to a separate autoclaved 1.5 ml tube. The separate aliquots were subjected to DNA extraction by either the simplified Chelex or the standard salting out extraction protocol^9,10. The salting out protocol is so-called and widely used because it employs high salt concentrations in lieu of hazardous organic solvents (such as phenol and chloroform) for the protein precipitation step during DNA extraction⁹.Extracts were used as templates for PCR amplification using primers targeting arthropod mitochondrial nicotinamide adenine dinucleotide dehydrogenase (NADH) subunit 4 gene (ND4) to check DNA quality¹¹, a PCR for identification of Anopheles gambiae sibling species¹⁰ and a nested PCR for typing of Plasmodium falciparum infection¹². Comparison using DNA quality (ND4) PCR showed 93% sensitivity and 82% specificity for the Chelex approach relative to the established salting out protocol. Corresponding values of sensitivity and specificity were 100% and 78%, respectively, using sibling species identification PCR and 92% and 80%, respectively for P. falciparum detection PCR. There were no significant differences in proportion of samples giving amplicon signal with the Chelex or the regular salting out protocol across all three PCR applications. The Chelex approach required three simple reagents and 37 min to complete, while the salting out protocol entailed 10 different reagents and 2 hr and 47 min'' processing time, including an overnight step. Our results show that the Chelex method is comparable to the existing salting out extraction and can be substituted as a simple and sustainable approach in resource-limited settings where a constant reagent supply chain is often difficult to maintain.     

Methods for the recovery of mitochondrial DNA sequences from museum specimens of myiasis-causing flies

Mitochondrial DNA (mtDNA) sequences from eight species of myiasis-causing flies, stored for up to 50 years, were amplified successfully. Universal primers were used to amplify six specific regions from total genomic DNA, including five mtDNA genes. The comparison of phenol/chloroform, DNAzol and Chelex techniques for DNA extraction showed that the DNAzol reagent was the most efficient in retrieving DNA from museum specimens, although the Chelex extraction procedure is currently the most frequently reported method. Comparison of the universal primer sequences with the homologous sequences of Cochliomyia hominivorax Coquerel and Chrysomya putoria Wiedemann (Diptera: Calliphoridae) revealed mismatches that could contribute to the low recovery of a short sequence from subunit II of cytochrome oxidase. The ability to characterize mtDNA markers from museum specimens should be useful in comparative studies of contemporary samples and should help in elucidating species introduction, colonization and dispersal.     

Chelex 100 as a medium for simple extraction of DNA for PCR-based typing from forensic material

Procedures utilizing Chelex 100 chelating resin have been developed for extracting DNA from forensic-type samples for use with the PCR. The procedures are simple, rapid, involve no organic solvents and do not require multiple tube transfers for most types of samples. The extraction of DNA from semen and very small bloodstains using Chelex 100 is as efficient or more efficient than using proteinase K and phenol-chloroform extraction. DNA extracted from bloodstains seems less prone to contain PCR inhibitors when prepared by this method. The Chelex method has been used with amplification and typing at the HLA DQ alpha locus to obtain the DQ alpha genotypes of many different types of samples, including whole blood, bloodstains, seminal stains, buccal swabs, hair and post-coital samples. The results of a concordance study are presented in which the DQ alpha genotypes of 84 samples prepared using Chelex or using conventional phenol-chloroform extraction are compared. The genotypes obtained using the two different extraction methods were identical for all samples tested.     

Procedure for tissue sample preparation and metabolite extraction for high-throughput targeted metabolomics

Reproducible quantification of metabolites in tissue samples is of high importance for characterization of animal models and identification of metabolic changes that occur in different tissue types in specific diseases. However, the extraction of metabolites from tissue is often the most labor-intensive and error-prone step in metabolomics studies. Here, we report the development of a standardized high-throughput method for rapid and reproducible extraction of metabolites from multiple tissue samples from different organs of several species. The method involves a bead-based homogenizer in combination with a simple extraction protocol and is compatible with state-of-the-art metabolomics kit technology for quantitative and targeted flow injection tandem mass spectrometry. We analyzed different extraction solvents for both reproducibility as well as suppression effects for a range of different animal tissue types including liver, kidney, muscle, brain, and fat tissue from mouse and bovine. In this study, we show that for most metabolites a simple methanolic extraction is best suited for reliable results. An additional extraction step with phosphate buffer can be used to improve the extraction yields for a few more polar metabolites. We provide a verified tissue extraction setup to be used with different indications. Our results demonstrate that this high-throughput procedure provides a basis for metabolomic assays with a wide spectrum of metabolites. The developed method can be used for tissue extraction setup for different indications like studies of metabolic syndrome, obesity, diabetes or cardiovascular disorders and nutrient transformation in livestock.     

Rapid and simple methodology for isolation of high quality genomic DNA from coniferous tissues (<Emphasis Type="Italic">Taxus baccata</Emphasis>)

Various investigations have been so far performed for extraction of genomic DNA from plant tissues, in which the extracted intact DNA can be exploited for a diverse range of biological studies. Extraction of high quality DNA from leathery plant tissues (e.g., coniferous organs) appears to be a critical stage. Moreover, for some species such as Taxus trees, bioprocess engineering and biosynthesis of secondary metabolites (e.g., paclitaxel) is a crucial step due to the restrictions associated with extinction of these species. However, extraction of intact genomic DNA from these plants still demands a rapid, easy and efficient protocol. To pursue such aim, in the current work, we report on the development of a simple and highly efficient method for the extraction of DNA from Taxus baccata. Based upon our protocol, interfering phenolic compounds were removed from extraction using polyvinylpyrrolidone and RNA contamination was resolved using LiCl. By employing this method, high quality genomic DNA was successfully extracted from leaves of T. baccata. The quality of extracted DNA was validated by various techniques such as RAPD marker, restriction digestions and pre-AFLP. Upon our findings, we propose this simple method to be considered for extraction of DNA from leathery plant tissues.     

Evaluation of three methods for effective extraction of DNA from human hair

In this paper we evaluate three different methods for extracting DNA from human hair i.e. the Chelex method, the QIAamp DNA Mini Kit method and the ISOHAIR method. Analysis of DNA prepared from dyed hairs with the ISOHAIR method suggested that the DNA extracts contained PCR inhibitors. On the other hand, few inhibition was observed when DNA from dyed hairs were extracted using the Chelex method and the QIAamp DNA Mini Kit method. In conclusion, the Chelex method is recommended for PCR experiments in view of its simplicity and cost-effectiveness. To assess the reliability of the Chelex method for the extraction of genomic DNA from both natural and dyed hair samples, minisatellite variant repeat (MVR)-polymerase chain reaction (PCR) patterns of Chelex-extracted DNA were compared using hairs (three natural black hairs and three dyed hairs) with buccal swabs from six individuals. Complete agreement was observed between hair and swab samples in each individual, proving the utility of the Chelex method.     

Reliable noninvasive genotyping based on excremental PCR of nuclear DNA purified with a magnetic bead protocol

A new protocol for extraction of DNA from faeces is presented. The protocol involves gentle washing of the surface of the faeces followed by a very simple DNA extraction utilizing the wash supernatant as the source of DNA. Unlike most other protocols, it does not involve the use of proteinase K and/or organic extraction, but is instead based on adsorption of the DNA to magnetic beads. The protocol was tested by microsatellite genotyping across six loci for sheep and reindeer faeces. Comparison with DNA extracted from blood demonstrated that the protocol was very reliable, even when used on material stored for a long time. The protocol was compared with another simple, solid-phase DNA-binding protocol, with the result that the bead-based protocol gave a slightly better amplification success and a lower frequency of allelic drop-outs. Furthermore, our experiments showed that the surface wash prior to DNA extraction is a crucial step, not only for our protocol, but for other solid-phase protocols as well.     

An optimisation approach to increase DNA amplification success of otter faeces

Faeces have proved to be a suitable non-invasive DNA source for microsatellite analysis in wildlife research. For the success of such studies it is essential to obtain the highest possible PCR amplification success rate. These rates are still relatively low in most carnivorous species, especially in the otter (Lutra lutra). We therefore optimised the entire microsatellite genotyping process by combining our findings with results from previous studies to gain a high rate of reliable genotypes. We investigated the influence of otter faecal quality in relation to the quantity of slimy secretions and three levels of storage periods at ?20°C on amplification success. Further, we tested the cost-effective and time-saving Chelex extraction method against the profitable QIAamp^® DNA Stool Kit (Qiagen), and compared three PCR methods - a standard single-step PCR protocol, a single-locus two-step PCR procedure and a multiplex two-step PCR procedure - regarding success rate and genotyping errors. The highest amplification success rate (median: 94%; mean: 78%) was achieved using faecal samples consisting only of jelly extracted with the QIAamp^® DNA Stool Mini Kit (Qiagen) immediately after collection and amplified following the time and cost efficient multiplex two-step PCR protocol. The two-step procedure, also referred to as pre-amplification approach, turned out to be the main improvement as it increases amplification success about 11% and reduces genotyping errors about 53%, most notably allelic dropouts.     

Preparation of protein extracts from recalcitrant plant tissues: an evaluation of different methods for two-dimensional gel electrophoresis analysis

This study focuses on the specific problems of protein extraction from recalcitrant plant tissues and evaluates several methods to bypass them. Sample preparation is a critical step in a two-dimensional gel electrophoresis proteome approach and is absolutely essential for good results. We evaluated four methods: the classical trichloroacetic acid (TCA)/acetone precipitation, TCA/acetone precipitation and fractionation, an alternative based on fractionation and without precipitation, and phenol extraction methanol/ammonium acetate precipitation. We optimized the phenol extraction protocol for small amounts of tissue, which is essential when the study material is limited. The protocol was optimized for banana (Musa spp.) and was subsequently applied to two other plant species: apple (Malus domestica L.) and potato (Solanum tuberosum L.). Banana (Musa spp.) is a good representative of a "difficult" plant species since it contains many interfering metabolites. Only classical TCA/acetone precipitation and phenol extraction methods proved useful as standard methods. Both methods are associated with a minor but reproducible loss of proteins. Every extraction method and the subsequent analytical procedure have their physicochemical limitations; both methods should be investigated before selecting an appropriate protocol. The study, which is presented in this paper, is useful for guiding the experimental setup of many other nonmodel species, containing various interfering elements.     

Rapid, one-step DNA extraction for insect pest identification by using DNA barcodes

Early detection of economically important insects is critical to preventing their establishment as serious pests. To accomplish this, tools for rapid and accurate species identification are needed. DNA barcoding, using short DNA sequences as species "genetic identification tags," has already shown large potential as a tool for rapid and accurate detection of economically important insects. DNA extraction is the critical first step in generating DNA barcodes and can be a rate-limiting step in very large barcoding studies. Consequently, a DNA extraction method that is rapid, easy to use, cost-effective, robust enough to cope with range of qualities and quantities of tissue, and can be adapted to robotic systems will provide the best method for high-throughput production of DNA barcodes. We tested the performance of a new commercial kit (prepGEM), which uses a novel, streamlined approach to DNA extraction, and we compared it with two other commercial kits (ChargeSwitch and Aquapure), which differ in their method of DNA extraction. We compared performance of these kits by measuring percentage of polymerase chain reaction (PCR) success and mean PCR product yield across a variety of arthropod taxa, whichincluded freshly collected, ethanol-preserved, and dried specimens of different ages. ChargeSwitch and prepGEM performed equally well, but they outperformed Aquapure. prepGEM was much faster, easier to use, and cheaper than ChargeSwitch, but ChargeSwitch performed slightly better for older (> 5-yr-old) dried insect specimens. Overall, prepGEM may provide a highly streamlined method of DNA extraction for fresh, ethanol-preserved, and young, dried specimens, especially when adapted for high-throughput, robotic systems.     

Species‐level biodiversity assessment using marine environmental DNA metabarcoding requires protocol optimization and standardization

DNA extraction from environmental samples (environmental DNA; eDNA) for metabarcoding‐based biodiversity studies is gaining popularity as a noninvasive, time‐efficient, and cost‐effective monitoring tool. The potential benefits are promising for marine conservation, as the marine biome is frequently under‐surveyed due to its inaccessibility and the consequent high costs involved. With increasing numbers of eDNA‐related publications have come a wide array of capture and extraction methods. Without visual species confirmation, inconsistent use of laboratory protocols hinders comparability between studies because the efficiency of target DNA isolation may vary. We determined an optimal protocol (capture and extraction) for marine eDNA research based on total DNA yield measurements by comparing commonly employed methods of seawater filtering and DNA isolation. We compared metabarcoding results of both targeted (small taxonomic group with species‐level assignment) and universal (broad taxonomic group with genus/family‐level assignment) approaches obtained from replicates treated with the optimal and a low‐performance capture and extraction protocol to determine the impact of protocol choice and DNA yield on biodiversity detection. Filtration through cellulose‐nitrate membranes and extraction with Qiagen's DNeasy Blood & Tissue Kit outperformed other combinations of capture and extraction methods, showing a ninefold improvement in DNA yield over the poorest performing methods. Use of optimized protocols resulted in a significant increase in OTU and species richness for targeted metabarcoding assays. However, changing protocols made little difference to the OTU and taxon richness obtained using universal metabarcoding assays. Our results demonstrate an increased risk of false‐negative species detection for targeted eDNA approaches when protocols with poor DNA isolation efficacy are employed. Appropriate optimization is therefore essential for eDNA monitoring to remain a powerful, efficient, and relatively cheap method for biodiversity assessments. For seawater, we advocate filtration through cellulose‐nitrate membranes and extraction with Qiagen's DNeasy Blood & Tissue Kit or phenol‐chloroform‐isoamyl for successful implementation of eDNA multi‐marker metabarcoding surveys.     

Modified CTAB Procedure for DNA Isolation from Epiphytic Cacti of the Genera Hylocereus and Selenicereus (Cactaceae)

We present a simple protocol for DNA isolation from climbing cacti, genera Hylocereus and Selenicereus. The abundant polysaccharides present in Hylocereus and Selenicereus species interfere with DNA isolation, and DNA extracts, rich in polysaccharides, are poor templates for amplification using polymerase chain reaction (PCR). We used roots as the source tissue due to the lower viscosity of the extracts relative to that of other tissues. The extraction and isolation procedure we devised consists of the following steps: (1) three washes of ground tissue with the extraction buffer to remove the polysaccharides; (2) extraction with high-salt (4 M NaCl) cetyltrimethylammonium bromide (CTAB) buffer to remove the remaining polysaccharides; (3) removal of RNA by RNase; (4) phenol:chloroform extraction to remove proteins; (5) chloroform extraction to remove remaining phenols. The yields ranged from 10 to 20 g DNA/g fresh roots. DNA samples prepared by our method were consistently amplifiable in the RAPD reaction and gave reproducible profiles.     

Finding flies in the mushroom soup: Host specificity of fungus‐associated communities revisited with a novel molecular method

Fruiting bodies of fungi constitute an important resource for thousands of other taxa. The structure of these diverse assemblages has traditionally been studied with labour‐intensive methods involving cultivation and morphology‐based species identification, to which molecular information might offer convenient complements. To overcome challenges in DNA extraction and PCR associated with the complex chemical properties of fruiting bodies, we developed a pipeline applicable for extracting amplifiable total DNA from soft fungal samples of any size. Our protocol purifies DNA in two sequential steps: (a) initial salt–isopropanol extraction of all nucleic acids in the sample is followed by (b) an extra clean‐up step using solid‐phase reversible immobilization (SPRI) magnetic beads. The protocol proved highly efficient, with practically all of our samples—regardless of biomass or other properties—being successfully PCR‐amplified using metabarcoding primers and subsequently sequenced. As a proof of concept, we apply our methods to address a topical ecological question: is host specificity a major characteristic of fungus‐associated communities, that is, do different fungus species harbour different communities of associated organisms? Based on an analysis of 312 fungal fruiting bodies representing 10 species in five genera from three orders, we show that molecular methods are suitable for studying this rich natural microcosm. Comparing to previous knowledge based on rearing and morphology‐based identifications, we find a species‐rich assemblage characterized by a low degree of host specialization. Our method opens up new horizons for molecular analyses of fungus‐associated interaction webs and communities. Fruiting bodies of fungi constitute an important resource for thousands of other taxa. The structure of these diverse assemblages has traditionally been studied with labour‐intensive methods involving cultivation and morphology‐based species identification, to which molecular information might offer convenient complements. To overcome challenges in DNA extraction and PCR associated with the complex chemical properties of fruiting bodies, we developed a pipeline applicable for extracting amplifiable total DNA from soft fungal samples of any size. Our protocol purifies DNA in two sequential steps: (a) initial salt–isopropanol extraction of all nucleic acids in the sample is followed by (b) an extra clean‐up step using solid‐phase reversible immobilization (SPRI) magnetic beads. The protocol proved highly efficient, with practically all of our samples—regardless of biomass or other properties—being successfully PCR‐amplified using metabarcoding primers and subsequently sequenced. As a proof of concept, we apply our methods to address a topical ecological question: is host specificity a major characteristic of fungus‐associated communities, that is, do different fungus species harbour different communities of associated organisms? Based on an analysis of 312 fungal fruiting bodies representing 10 species in five genera from three orders, we show that molecular methods are suitable for studying this rich natural microcosm. Comparing to previous knowledge based on rearing and morphology‐based identifications, we find a species‐rich assemblage characterized by a low degree of host specialization. Our method opens up new horizons for molecular analyses of fungus‐associated interaction webs and communities.     

An assessment of the efficiency of fungal DNA extraction methods for maximizing the detection of medically important fungi using PCR

To date, no single reported DNA extraction method is suitable for the efficient extraction of DNA from all fungal species. The efficiency of extraction is of particular importance in PCR-based medical diagnostic applications where the quantity of fungus in a tissue biopsy may be limited. We subjected 16 medically relevant fungi to physical, chemical and enzymatic cell wall disruption methods which constitutes the first step in extracting DNA. Examination by light microscopy showed that grinding with mortar and pestle was the most efficient means of disrupting the rigid fungal cell walls of hyphae and conidia. We then trialled several published DNA isolation protocols to ascertain the most efficient method of extraction. Optimal extraction was achieved by incorporating a lyticase and proteinase K enzymatic digestion step and adapting a DNA extraction procedure from a commercial kit (MO BIO) to generate high yields of high quality DNA from all 16 species. DNA quality was confirmed by the successful PCR amplification of the conserved region of the fungal 18S small-subunit rRNA multicopy gene.