Glutamate production from β-glucan using endoglucanase-secreting <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis>

We demonstrate glutamate production from β-glucan using endoglucanase (EG)-expressing Corynebacterium glutamicum. The signal sequence torA derived from Escherichia coli K12, which belongs to the Tat pathway, was suitable for secreting EG of Clostridium thermocellum using C. glutamicum as a host. Using the torA signal sequence, endoglucanase from Clostridium cellulovorans 743B was successfully expressed, and the secreted EG produced 123 mg of reducing sugar from 5 g of β-glucan at 30 °C for 72 h, which is the optimal condition for C. glutamicum growth. Subsequently, glutamate fermentation from β-glucan was carried out with the addition of Aspergillus aculeatus β-glucosidase produced by recombinant Aspergillus oryzae. Using EG-secreting C. glutamicum, 178 mg/l of glutamate was produced from 15 g of β-glucan. This is the first report of glutamate fermentation from β-glucan using endoglucanase-secreting C. glutamicum.     

Secondary structure determination by FTIR of an archaeal ubiquitin-like polypeptide from <Emphasis Type="Italic">Natrialba magadii</Emphasis>

The ubiquitin protein belongs to the β-grasp fold family, characterized by four or five β-sheets with a single α-helical middle region. Ubiquitin-like proteins (Ubls) are structural homologues with low sequence identity to ubiquitin and are widespread among both eukaryotes and prokaryotes. We previously demonstrated by bioinformatics that P400, a polypeptide from the haloalkaliphilic archaeon Natrialba magadii, has structural homology with both ubiquitin and Ubls. This work examines the secondary structure of P400 by Fourier transform infrared spectroscopy (FTIR). After expression in Escherichia coli, recombinant P400 (rP400) was separated by PAGE and eluted pure from zinc-imidazole reversely stained gels. The requirement of high salt concentration of this polypeptide to be folded was corroborated by intrinsic fluorescence spectrum. Our results show that fluorescence spectra of rP400 in 1.5 M KCl buffer shifts and decreases after thermal denaturation as well as after chemical treatment. rP400 was lyophilized and rehydrated in buffer containing 1.5 M KCl before both immunochemical and FTIR tests were performed. It was found that rP400 reacts with anti-ubiquitin antibody after rehydration in the presence of high salt concentrations. On the other hand, like ubiquitin and Ubls, the amide I′ band for rP400 shows 10% more of its sequence to be involved in β-sheet structures than in α-helix. These findings suggest that P400 is a structural homologue of the ubiquitin family proteins.     

An acid and highly thermostable xylanase from <Emphasis Type="Italic">Phialophora</Emphasis> sp. G5

An endo-β-1,4-xylanase gene, designated xyn10G5, was cloned from Phialophora sp. G5 and expressed in Pichia pastoris. The 1,197-bp full-length gene encodes a polypeptide of 399 amino acids consisting of a putative signal peptide at residues 1–20, a family 10 glycoside hydrolase domain, a short Gly/Thr-rich linker and a family 1 carbohydrate-binding module (CBM). The deduced amino acid sequence of XYN10G5 shares the highest identity (53.4%) with a putative xylanase precursor from Aspergillus terreus NIH2624. The purified recombinant XYN10G5 exhibited the optimal activity at pH 4.0 and 70 °C, remained stable at pH 3.0–9.0 (>70% of the maximal activity), and was highly thermostable at 70 °C (retaining ~90% of the initial activity for 1 h). Substrate specificity studies have shown that XYN10G5 had the highest activity on soluble wheat arabinoxylan (350.6 U mg⁻¹), and moderate activity to various heteroxylans, and low activity on different types of cellulosic substrates. Under simulated gastric conditions, XYN10G5 was stable and released more reducing sugars from soluble wheat arabinoxylan; when combined with a glucanase (CelA4), the viscosity of barley–soybean feed was significantly reduced. These favorable enzymatic properties make XYN10G5 a good candidate for application in the animal feed industry.     

Heterologous expression and characterization of a β-1,6-glucanase from <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis>

The cell wall of Candida albicans is composed of mannoproteins associated to glycan polymers. Most of these proteins are retained in this compartment through a phosphodiester linkage between a remnant of their glycosylphosphatidylinositol anchor and the β-1,6-glucan polymer. A pure β-1,6-glucanase is thus required in order to release them. In this paper, we report the expression/secretion by the yeast Yarrowia lipolytica of an Aspergillus fumigatus enzyme homologous to previously described β-1,6-glucanases. The coding sequence was expressed under the control of a strong promoter and the recombinant enzyme was targeted to the secretory pathway using the signal sequence of a well-known major secretory protein in this host. Addition of a FLAG epitope at the C-terminus allowed its efficient purification from culture supernatant following batch adsorption. The purified enzyme was characterized as a β-1,6-glucanase and was shown to be active on C. albicans cell walls allowing the release of a previously described cell wall protein.     

Gene cloning and enzyme structure modeling of the <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> N74 fructosyltransferase

The fructooligosaccharides (FOS) represent an important source of prebiotic compounds that are widely used as an ingredient in functional foods. Recently, the strain Aspergillus oryzae N74 was reported as a potential microorganism for the industrial production of FOS, due to its high yields of FOS production. In this work, we used a PCR-cloning strategy to clone the A. oryzae N74 ftase gene as a previous step for recombinant enzyme production. Ftase showed a 1630 bp size with a 99% similarity with other A. oryzae strains and between 1 to 68% identities with other Aspergillus strains. This gene encodes for a 525 amino acids protein with 99% similarity with other A. oryzae strains and between 11 to 69% similarities with other Aspergillus strains. Finally, an A. oryzae N74 FTase tertiary structure model was predicted base on its similarity with other glycoside hydrolase 32 family members. The active site was located inside the β-propeller domain and was formed for non-charged polar and charged amino acids. In summary, these results shows the high level of sequence conservation between A. oryzae strains and represent a first step towards the development of a FOS production industrial process using recombinant microorganism carrying the ftase gene from A. oryzae N74.     

Properties of a purified thermostable glucoamylase from <Emphasis Type="Italic">Aspergillus niveus</Emphasis>

A glucoamylase from Aspergillus niveus was produced by submerged fermentation in Khanna medium, initial pH 6.5 for 72 h, at 40°C. The enzyme was purified by DEAE-Fractogel and Concanavalin A-Sepharose chromatography. The enzyme showed 11% carbohydrate content, an isoelectric point of 3.8 and a molecular mass of 77 and 76 kDa estimated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis or Bio-Sil-Sec-400 gel filtration, respectively. The pH optimum was 5.0–5.5, and the enzyme remained stable for at least 2 h in the pH range of 4.0–9.5. The temperature optimum was 65°C and retained 100% activity after 240 min at 60°C. The glucoamylase remained completely active in the presence of 10% methanol and acetone. After 120 min hydrolysis of starch, glucose was the unique product formed, confirming that the enzyme was a glucoamylase (1,4-alpha-d-glucan glucohydrolase). The K _m was calculated as 0.32 mg ml⁻¹. Circular dichroism spectroscopy estimated a secondary structure content of 33% α-helix, 17% β-sheet and 50% random structure, which is similar to that observed in the crystal structures of glucoamylases from other Aspergillus species. The tryptic peptide sequence analysis showed similarity with glucoamylases from A. niger, A. kawachi, A. ficcum, A. terreus, A. awamori and A. shirousami. We conclude that the reported properties, such as solvent, pH and temperature stabilities, make A. niveus glucoamylase a potentially attractive enzyme for biotechnological applications.     

Construction of an <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cell-surface display system using a putative GPI-anchored protein

A novel cell-surface display system was constructed in Aspergillus oryzae. Each of the five genes encoding the putative cell-wall-localized protein from the A. oryzae genome was cloned and these cell-surface anchor functions were examined by fusion to the C-terminal of the green fluorescent protein (GFP). Using the MP1 and CWP proteins as anchor proteins, GFP signals were strongly observed on the cell surface of recombinant A. oryzae. When these proteins were used as anchor proteins for cell-surface display of β-glucosidase from A. oryzae, enzyme activity was detected on the cell surface. In particular, β-glucosidase activity of recombinant A. oryzae using MP1, a putative glycosylphosphatidylinositol (GPI) anchor protein was higher than CWP. Based on these results, it was concluded that the MP1 protein can act as a GPI-anchor protein in A. oryzae, and the proposed cell-surface display system using MP1 allows for the display of heterogeneous and endogenous proteins.     

Identification and characterization of a novel legume-like lectin cDNA sequence from the red marine algae <Emphasis Type="Italic">Gracilaria fisheri</Emphasis>

A legume-type lectin (L-lectin) gene of the red algae Gracilaria fisheri (GFL) was cloned by rapid amplification of cDNA ends (RACE). The full-length cDNA of GFL was 1714 bp and contained a 1542 bp open reading frame encoding 513 amino acids with a predicted molecular mass of 56.5 kDa. Analysis of the putative amino acid sequence with NCBI-BLAST revealed a high homology (30–68%) with legume-type lectins (L-lectin) from Griffithsia japonica, Clavispora lusitaniae, Acyrthosiphon pisum, Tetraodon nigroviridis and Xenopus tropicalis. Phylogenetic relationship analysis showed the highest sequence identity to a glycoprotein of the red algae Griffithsia japonica (68%) (GenBank number AAM93989). Conserved Domain Database analysis detected an N-terminal carbohydrate recognition domain (CRD), the characteristic of L-lectins, which contained two sugar binding sites and a metal binding site. The secondary structure prediction of GFL showed a β-sheet structure, connected with turn and coil. The most abundant structural element of GFL was the random coil, while the α-helixes were distributed at the N- and C-termini, and 21 β-sheets were distributed in the CRD. Computer analysis of three-dimensional structure showed a common feature of L-lectins of GFL, which included an overall globular shape that was composed of a β-sandwich of two anti-parallel β-sheets, monosaccharide binding sites, were on the top of the structure and in proximity with a metal binding site. Northern blot analysis using a DIG-labelled probe derived from a partial GFL sequence revealed a hybridization signal of ~1.7 kb consistent with the length of the full-length GFL cDNA identified by RACE. No detectable band was observed from control total RNA extracted from filamentous green algae.     

Validation of Arsenic Resistance in <Emphasis Type="Italic">Bacillus cereus</Emphasis> Strain AG27 by Comparative Protein Modeling of <Emphasis Type="Italic">ars</Emphasis>C Gene Product

The ars gene system provides arsenic resistance to a variety of microorganisms and can be chromosomal or plasmid-borne. The arsC gene, which codes for an arsenate reductase is essential for arsenate resistance and transforms arsenate into arsenite, which is extruded from the cell. Therefore, arsC gene from Bacillus cereus strain AG27 isolated from soil was amplified, cloned and sequenced. The strain exhibited a minimum inhibitory concentration of 40 and 35 mM to sodium arsenate and sodium arsenite, respectively. Homology of the sequence, when compared with available database using BLASTn search showed that 300 bp amplicons obtained possess partial arsC gene sequence which codes for arsenate reductase, an enzyme involved in the reduction of arsenate to arsenite which is then effluxed out of the cell, thereby indicating the presence of efflux mechanism of resistance in strain. The efflux mechanism was further confirmed by atomic absorption spectroscopy and scanning electron microscopy studies. Moreover, three dimensional structure of modeled arsC from Bacillus cereus strain shares significant structural similarity with arsenate reductase protein of B.subtilis, consisting of, highly similar overall fold with single α/β domain containing a central four stranded, parallel, open-twisted β-sheet flanked by α-helices on both sides. The structure harbors the arsenic binding motif AB loop or P-loop that is highly conserved in arsenate reductase family.     

Sequence specific 1H, 13C, and 15N resonance assignments of Hahellin from Hahella chejuensis, a putative member of the βγ-crystallin superfamily

The sequence specific ¹H, ¹³C, and ¹⁵N resonance assignments of Hahellin, a putative member of βγ-crystallin family, from Hahella Chejuensis, have been accomplished by NMR spectroscopy. The resonance assignments reveal that the protein adopts predominantly a β-sheet conformation as in the case of βγ-crystallin folds.     

Top-down approach in protein RDC data analysis: <Emphasis Type="Italic">de novo</Emphasis> estimation of the alignment tensor

In solution NMR spectroscopy the residual dipolar coupling (RDC) is invaluable in improving both the precision and accuracy of NMR structures during their structural refinement. The RDC also provides a potential to determine protein structure de novo. These procedures are only effective when an accurate estimate of the alignment tensor has already been made. Here we present a top–down approach, starting from the secondary structure elements and finishing at the residue level, for RDC data analysis in order to obtain a better estimate of the alignment tensor. Using only the RDCs from N–H bonds of residues in α-helices and CA–CO bonds in β-strands, we are able to determine the offset and the approximate amplitude of the RDC modulation-curve for each secondary structure element, which are subsequently used as targets for global minimization. The alignment order parameters and the orientation of the major principal axis of individual helix or strand, with respect to the alignment frame, can be determined in each of the eight quadrants of a sphere. The following minimization against RDC of all residues within the helix or strand segment can be carried out with fixed alignment order parameters to improve the accuracy of the orientation. For a helical protein Bax, the three components A _xx , A _yy and A _zz , of the alignment order can be determined with this method in average to within 2.3% deviation from the values calculated with the available atomic coordinates. Similarly for β-sheet protein Ubiquitin they agree in average to within 8.5%. The larger discrepancy in β-strand parameters comes from both the diversity of the β-sheet structure and the lower precision of CA–CO RDCs. This top-down approach is a robust method for alignment tensor estimation and also holds a promise for providing a protein topological fold using limited sets of RDCs.     

Extracellular production of <Emphasis Type="Italic">Streptomyces exfoliatus</Emphasis> poly(3-hydroxybutyrate) depolymerase in <Emphasis Type="Italic">Rhodococcus</Emphasis> sp. T104: determination of optimal biocatalyst conditions

The phaZ _Sex gene encoding poly(3-hydroxybutyrate) depolymerase from Streptomyces exfoliatus has been successfully cloned and expressed in Rhodococcus sp. T104 for the first time. Likewise, the recombinant enzyme was efficiently produced as an extracellular active form and purified to homogeneity by two hydrophobic chromatographic steps. MALDI-TOF analysis showed that the native enzyme is a monomer. Circular dichroism studies have revealed a secondary structure showing 25.6% α-helix, 21.4% β-sheet, 17.1% β-turns, and 35.2% random coil, with a midpoint transition temperature (T _m) of 55.8 °C. Magnesium and calcium ions enhanced the enzyme activity, whereas manganese inhibited it. EDTA moderately decreased the activity, and the enzyme was completely deactivated at 3 M NaCl. Chemical modification studies indicated the presence of the catalytic triad serine–histidine–carboxylic acid in the active site. High-performance liquid chromatography (HPLC)–mass spectrometry (MS) analysis of PHB products of enzymatic hydrolysis showed monomers and dimers of 3-hydroxybutyric acid, demonstrating that PHB depolymerase is an exo-hydrolase. Addition of methyl-β-cyclodextrin simultaneously increased the activity as well as preserved the enzyme during lyophilization. Finally, thermoinactivation studies showed that the enzyme is highly stable at 40 °C. All these features support the potential industrial application of this recombinant enzyme in the production of (R)-3-hydroxyalkanoic acid derivatives as well as in the degradation of bioplastics.     

Molecular Cloning and Characterization of a Malic Enzyme Gene from the Oleaginous Yeast <Emphasis Type="Italic">Lipomyces starkeyi</Emphasis>

The malic enzyme-encoding cDNA (GQ372891) from the oleaginous yeast Lipomyces starkeyi AS 2.1560 was isolated, which has an 1719-bp open reading frame flanked by a 290-bp 5′ untranslated sequence and a 92-bp 3′ untranslated sequence. The proposed gene, LsME1, encoded a protein with 572 amino acid residues. The protein presented 58% sequence identity with the malic enzymes from Yarrowia lipolytica CLIB122 and Aspergillus fumigatus Af293. The LsME1 gene was cloned into the vector pMAL-p4x to express a fusion protein (MBP-LsME1) in Escherichia coli TB1. The fusion protein was purified and then cleaved by Factor Xa to give the recombinant LsME1. This purified enzyme took either NAD⁺ or NADP⁺ as the coenzyme but preferred NAD⁺. The K _m values for malic acid, NAD⁺ and NADP⁺ were 0.85 ± 0.05 mM, 0.34 ± 0.08 mM, and 7.4 ± 0.32 mM, respectively, at pH 7.3.     

Secondary structure estimation of recombinant <Emphasis Type="Italic">psbH</Emphasis>, encoding a photosynthetic membrane protein of cyanobacterium <Emphasis Type="Italic">Synechocystis</Emphasis> sp. PCC 6803

The PsbH protein of cyanobacterium Synechocystis sp. PCC 6803 was expressed as a fusion protein with glutathione-S transferase (GST) in E. coli grown on a mineral medium enriched in ¹⁵N isotope. After enzymatic cleavage of the fusion protein, the ¹H-¹⁵N-HSQC spectrum of PsbH protein in presence of the detergent β-D-octyl-glucopyranoside (OG) was recorded on a Bruker DRX 500 MHz NMR spectrometer equipped with a 5 mm TXI cryoprobe to enhance the sensitivity and resolution. Non-labelled protein was used for secondary structure estimation by deconvolution from circular dichroism (CD) spectra. Experimental results were compared with our results from a structural model of PsbH using a restraint-based comparative modelling approach combined with molecular dynamics and energetic modelling. We found that PsbH shows 34–38% α-helical structure (Thr36-Ser60), a maximum of around 15% of β-sheet, and 12–19% of β-turn.     

Cloning,purification and biochemical characterization of beta agarase from the marine bacterium <Emphasis Type="Italic">Pseudoalteromonas</Emphasis> sp. AG4

A gene (agrP) encoding a β-agarase from Pseudoalteromonas sp. AG4 was cloned and expressed in Escherichia coli. The agrP primary structure consists of an 870-bp open reading frame (ORF) encoding 290 amino acids (aa). The predicted molecular mass and isoelectric point were determined at 33 kDa and 5.9, respectively. The signal peptide was predicted to be 21 aa. The deduced aa sequence showed 98.6% identity to β-agarase from Pseudoalteromonas atlantica. The recombinant protein was purified as a fusion protein and biochemically characterized. The purified β-agarase (AgaP) had specific activity of 204.4 and 207.5 units/mg towards agar and agarose, respectively. The enzyme showed maximum activity at 55°C and pH 5.5. It was stable at pH 4.5 to 8.0 and below 55°C for 1 h. The enzyme produced neoagarohexaose and neoagarotetraose from agar and in addition to that neoagarobiose from the agarose. The neoagarooligosaccharides were biologically active. Hence, AgaP is a useful enzyme source for use by cosmetic and pharmaceutical industries.     

Structure and denaturation of 4-chlorobenzoyl coenzyme A dehalogenase from <Emphasis Type="Italic">Arthrobacter</Emphasis> sp. strain TM-1

The secondary structure of the trimeric protein 4-chlorobenzoyl coenzyme A dehalogenase from Arthrobacter sp. strain TM-1, the second of three enzymes involved in the dechlorination of 4-chlorobenzoate to form 4-hydroxybenzoate, has been examined. E_mM for the enzyme was 12.59. Analysis by circular dichroism spectrometry in the far uv indicated that 4-chlorobenzoyl coenzyme A dehalogenase was composed mostly of α-helix (56%) with lesser amounts of random coil (21%), β-turn (13%) and β-sheet (9%). These data are in close agreement with a computational prediction of secondary structure from the primary amino acid sequence, which indicated 55.8% α-helix, 33.7% random coil and 10.5% β-sheet; the enzyme is, therefore, similar to the 4-chlorobenzoyl coenzyme A dehalogenase from Pseudomonas sp. CBS-3. The three-dimensional structure, including that of the presumed active site, predicted by computational analysis, is also closely similar to that of the Pseudomonas dehalogenase. Study of the stability and physicochemical properties revealed that at room temperature, the enzyme was stable for 24 h but was completely inactivated by heating to 60°C for 5 min; thereafter by cooling at 1°C min⁻¹ to 45°C, 20.6% of the activity could be recovered. Mildly acidic (pH 5.2) or alkaline (pH 10.1) conditions caused complete inactivation, but activity was fully recovered on returning the enzyme to pH 7.4. Circular dichroism studies also indicated that secondary structure was little altered by heating to 60°C, or by changing the pH from 7.4 to 6.0 or 9.2. Complete, irreversible destruction of, and maximal decrease in the fluorescence yield of the protein at 330–350 nm were brought about by 4.5 M urea or 1.1 M guanidinium chloride. Evidence was obtained to support the hypothetical three-dimensional model, that residues W140 and W167 are buried in a non-polar environment, whereas W182 appears at or close to the surface of the protein. At least one of the enzymes of the dehalogenase system (the combined 4-chlorobenzoate:CoA ligase, the dehalogenase and 4-hydroxybenzoyl coenzyme A thioesterase) appears to be capable of association with the cell membrane.

Isolation and characterization of a new phycoerythrin from the cyanobacterium <Emphasis Type="Italic">Synechococcus</Emphasis> sp. ECS-18

A new phycoerythrin, SCH-phycoerythrin, was purified from Synechococcus sp. ECS-18 by DEAE-Sephacel anion exchange chromatography and Sephacryl S-300 gel filtration. The protein pigment had an absorbance maximum at 542 nm and a fluorescence maximum at 565 nm. The native molecular mass was approximately 219 kDa as determined by gel filtration, and sodium dodecyl sulfate polyacrylamide gel electrophoresis demonstrated the presence of two subunits, with molecular mass of 19 and 17.9 kDa. These observations are consistent with the (αβ)₆ subunit composition that is characteristic of phycoerythrins. The α- and β-subunits showed immunological identity by Ouchterlony double immunodiffusion with an anti-phycoerythrin antiserum. The DNA sequence of the SCH-phycoerythrin gene was determined by PCR amplification using primers based on the conserved N-terminal amino acid sequence of the α- and β-subunits of phycoerythrins.     

Secretion, purification, and characterisation of barley α-amylase produced by heterologous gene expression in Aspergillus niger

Efficient production of recombinant barley α-amylase has been achieved in Aspergillus niger. The cDNA encoding α-amylase isozyme 1 (AMY1) and its signal peptide was placed under the control of the Aspergillus nidulans glyceraldehyde-3-phosphate dehydrogenase (gpd) promoter and the A. nidulans trpC gene terminator. Secretion yields up to 60 mg/l were obtained in media optimised for α-amylase activity and low protease activity. The recombinant AMY1 (reAMY1) was purified to homogeneity and found to be identical to native barley AMY1 with respect to size, pI, and immunoreactivity. N-terminal sequence analysis of the recombinant protein indicated that the endogenous plant signal peptide is correctly processed in A. niger. Electrospray ionisation/mass spectrometry gave a molecular mass for the dominant form of 44 960 Da, in accordance with the loss of the LQRS C-terminal residues; glycosylation apparently did not occur. The activities of recombinant and native barley α-amylases are very similar towards insoluble and soluble starch as well as 2-chloro-4-nitrophenol β-d-maltoheptaoside and amylose (degree of polymerisation = 17). Barley α-amylase is the first plant protein efficiently secreted and correctly processed by A. niger using its own signal sequence. Received: 22 August 1997 / Received revision: 21 November 1997 / Accepted: 29 November 1997     

Evolutionary Relationships Among <Emphasis Type="Italic">Aspergillus terreus</Emphasis> Isolates and their Relatives

Aspergillus terreus is a ubiquitous fungus in our environment. It is an opportunistic human pathogen and economically important as the main producer of lovastatin, a cholesterol lowering drug. Our aim was to examine the genetic variability of A. terreus and closely related species using molecular and analytical techniques. Lovastatin production was examined by HPLC. Lovastatin was produced by seven isolates belonging to the species A. terreus. RAPD analyses were carried out using 25 different random primers. Neighbor-joining analysis of RAPD data (120 characters) resulted in clustering of the A. terreus isolates into distinct groups. Some correlation was observed between lovastatin producing abilities of the isolates and their position on the dendrogram based on RAPD profiles. The internal transcribed spacer region and the 5.8S rRNA gene of A. terreus and related isolates was also sequenced. Phylogenetic analysis of sequence data let us classify the isolates into different clades which mostly correspond to the species Aspergillus terreus, Aspergillus flavipes, Aspergillus niveus, Aspergillus carneus and Aspergillus janus/A. janus var. brevis. Aspergillus allahabadii, A. terreus var. aureus and A. niveus var. indicus belonged to the A. niveus clade, while an Aspergillus isolate previously classified as A. niveus was most closely related to A. flavipes isolates. Aspergillus anthodesmis formed a distinct branch on the tree. Although it was previously suggested based on 28S rDNA sequence data that Aspergillus section Terrei should include A. carneus and A. niveus isolates, phylogenetic analysis of ITS sequences indicate that A. flavipes isolates are more closely related to A. terreus than A. carneus isolates. Our data suggest that sections Terrei and Flavipedes should be merged. However, further loci should be analysed to draw more definite conclusions.