Micelles self-assembled from thermoresponsive 2-hydroxy-3-butoxypropyl starches for drug delivery

A new class of thermoresponsive polymers, 2-hydroxy-3-butoxypropyl starches (HBPS), was synthesized by changing the hydrophobic-hydrophilic balance of starch using butyl glycidyl ether as hydrophobic reagent. The lower critical solution temperatures (LCSTs) of HBPS can be adjusted by varying the molar substitution (MS) of hydrophobic groups in the range of 4.5-32.5 °C. In water, HBPS can self-assemble into micelles below the LCST, and the micelles are deformed and aggregate into more polar and larger objects above the LCST. The drug loading HBPS micelles showed thermoresponsive controlled release, namely, the drug release is accelerated dramatically above the LCST.     

Regulation of growth and adhesion of cultured cells by insulin conjugated with thermoresponsive polymers

We developed a new biomaterial for use in cell culture. The biomaterial enabled protein-free cell culture and the recovery of viable cells by lowering the temperature without the aid of supplements. Insulin was immobilized and a thermoresponsive polymer was grafted onto a substrate. We investigated the effect of insulin coupling on the lower critical solution temperature (LCST) of the thermoresponsive polymer, poly(N-isopropylacrylamide-co-acrylic acid), using polymers that were ungrafted, or coupled with insulin. The insulin conjugates were precipitated from an aqueous solution at high temperatures, but they were soluble at low temperatures. The LCST was not significantly affected by the insulin coupling. The thermoresponsive polymer was grafted to glow-discharged polystyrene film and covalently conjugated with insulin. The surface wettability of the conjugate film was high at low temperatures and low at high temperatures. The amounts of immobilized insulin required to stimulate cell growth were 1-10% of the amount of free insulin required to produce the same effect. The maximal mitogenic effect of immobilized insulin was greater than that of free insulin. About half of the viable cells was detached from the film only by lowering the temperature. The recovered cells proliferated normally on new culture dishes. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 53: 339-344, 1997.     

Modulate the phase transition temperature of hydrogels with both thermosensitivity and biodegradability

The synthesis and characterization of thermoresponsive hydrogels on the basis of N-isoproplyarylamide (NIPAAm) and acrylamide (AAm) copolymers crosslinked with a novel biodegradable crosslinker (PEG-co-PLA) were carried out in this study. Swelling measurement results demonstrated that four gels of PNAM5, PNAM10, PNAM12 and PNAM15 are thermoresponsive. The equilibrium swelling ratio and degradation of the hydrogels strongly depend on hydrogels composition. The morphology of the hydrogels was observed by scanning electron microscopy (SEM), and their thermal property was characterized by differential scanning calorimetry (DSC). The results show that the proportion of AAm in the copolymer has notable effect on the low critical solution temperature (LCST) of the hydrogel. When the molar ratio of AAm to NIPAAm was increased from 1:10 to 3:10 the LCST of the copolymer increased from 39.7 to 64.2 °C. The compression modulus of PNAM15 is of the highest among other hydrogels, because PNAM15 hydrogel has a more compact structure.     

Thermoresponsive Aggregation Behavior of Triterpene-Poly(ethylene oxide) Conjugates in Water

Bioconjugate amphiphiles comprising triterpene and poly(ethylene oxide) (PEO) were studied according to their thermoresponsive aggregation behavior (LCST) in water. Cholesteryl-PEO (CE) and betulinyl-PEO (BE) comprising <70 wt% PEO precipitated from water upon heating. CE, but not BE, solutions contained nanoscopic aggregates at room temperature causing different thermoprecipitation behaviors. Solutions containing 5?wt% solutions of BE with short PEO chains demonstrated dual thermoresponsive behavior, precipitating at high temperature and forming hydrogel at low temperature. A BE multiblock copolymer was found to form large aggregates, presumably vesicles, in water. Results suggest that the solution properties of triterpene-PEO amphiphiles can be controlled by the chemical composition and structure.     

Enhanced gene expression through temperature profile-induced variations in molecular architecture of thermoresponsive polymer vectors

BACKGROUND: Successful non-viral gene targeting requires vectors to meet two conflicting needs-strong binding to protect the genetic material during transit and weak binding at the target site to enable release. Responsive polymers could fulfil such requirements through the switching of states, e.g. the chain-extended coil to chain-collapsed globule phase transition that occurs at a lower critical solution temperature (LCST), in order to transport nucleic acid in one polymer state and release it in another. METHODS: The ability of new synthetic polycations based on poly(ethyleneimine) (PEI) with grafted neutral responsive poly(N-isopropylacrylamide) (PNIPAm) chains to condense DNA into particles with architectures varying according to graft polymer LCST was assessed using a combination of fluorescence spectroscopy, dynamic light scattering (DLS), zeta sizing, gel retardation and atomic force microscopy studies. Transfection assays were conducted under experimental conditions wherein the polymer components were able to cycle across their LCST. RESULTS: Two PEI-PNIPAm conjugate polymers with different LCSTs displayed coil-globule transitions when complexed to plasmid DNA, leading to variations in molecular architecture as shown by changes in emission maxima of an environment-sensitive fluorophore attached to the PNIPAm chains. Gel retardation assays demonstrated differences in electrophoretic mobilities of polymer-DNA complexes with temperatures below and above polymer LCSTs. Atomic force micrographs showed changes in the structures of polymer-DNA complexes for a polymer undergoing a phase transition around body temperature but not for the polymer with LCST outside this range. Transfection experiments in C2C12 and COS-7 cells demonstrated that the highest expression of transgene occurred in an assay that involved a 'cold-shock' below polymer LCST during transfection. CONCLUSIONS: Designed changes in thermoresponsive polycation vector configuration via temperature-induced phase transitions enhanced transgene expression. The results indicate that changes in molecular architecture induced by a carefully chosen stimulus during intracellular trafficking can be used to enhance gene delivery.     

Micropatterned thermoresponsive polymer brush surfaces for fabricating cell sheets with well-controlled orientational structures

Newly developed fabrication technique of thermoresponsive surface using RAFT-mediated block copolymerization and photolithography achieved stripe-like micropatterning of poly(N-isopropylacrylamide) (PIPAAm) brush domains and poly(N-isopropylacrylamide)-b-poly(N-acryloylmorpholine) domains. Normal human dermal fibroblasts were aligned on the physicochemically patterned surfaces simply by one-pot cell seeding. Fluorescence images showed the well-controlled orientation of actin fibers and fibronectin in the confluent cell layers with associated extracellular matrix (ECM) on the surfaces. Furthermore, the aligned cells were harvested as a tissue-like cellular monolayer, called "cell sheet" only by reducing temperature below PIPAAm's lower critical solution temperature (LCST) to 20 °C. The cell sheet harvested from the micropatterned surface possessed a different shrinking rate between vertical and parallel sides of the cell alignment (approximately 3:1 of aspect ratio). This indicates that the cell sheet maintains the alignment of cells and related ECM proteins, promising to show the mechanical and biological aspects of cell sheets harvested from the functionalized thermoresponsive surfaces.     

DL-3,3-difluoroglutamate: an enhancer of folylpolyglutamate elongation

The effect of 3,3-difluoroglutamate (F2Glu) on the reaction catalyzed by rat liver folypolyglutamate synthetase was investigated. F2Glu was a potent, concentration-dependent inhibitor of poly(gamma-glutamylation) using [3H]Glu and either methotrexate (4-NH2-10-CH3PteGlu) or tetrahydrofolate as substrates. It was determined that F2Glu acted as an alternate substrate, but in contrast to the previously characterized alternate substrate 4-fluoroglutamate (McGuire, J.J., and Coward, J.K. (1985) J. Biol. Chem. 260, 6747-6754), it did not terminate polyglutamate chain elongation. Instead, F2Glu promoted chain elongation. Thus, synthesis of products from [3H]methotrexate containing 1 and 2 additional amino acid residues occurred at a substantially higher rate in the presence of F2Glu when compared to identical reactions in the presence of Glu; this was more pronounced for the product containing 2 additional residues. Identities of the products were established by their respective chromatographic elution positions and by limit digestion with gamma-glutamyl hydrolases. Ligation of Glu to 4-NH2-10-CH3PteGlu-gamma-(3,3-difluoroglutamate) was also enhanced. These results are consistent with F2Glu enhancing the synthesis of poly(gamma-glutamate) metabolites at the level of either the incoming amino acid (glutamate analog) or the gamma-glutamyl acceptor species. F2Glu is thus the first glutamate analog which enhances chain elongation catalyzed by folypolyglutamate synthetase.     

Temperature-responsive cellulose by ceric(IV) ion-initiated graft copolymerization of N-isopropylacrylamide

Temperature-responsive cellulose has been obtained by graft copolymerization of N-isopropylacrylamide (NIPAAm) monomer using ceric ammonium nitrate (CAN) as initiator at 25.0 +/- 0.1 degrees C in acidic medium. Kinetic and grafting parameters were evaluated at different concentrations of NIPAAm ranging from 1.25 x 10(-3) to 12.5 x 10(-3) mol dm(-3) and varying concentrations of CAN from 1.5 x 10(-3) to 9.0 x 10(-3) mol dm(-3) at constant concentration of nitric acid (2.5 x 10(-2) mol dm(-3)). The graft copolymerization of NIPAAm onto cellulose has shown a significant increasing trend below lower critical solution temperature (LCST) of poly(N-isopropylacrylamide) (PNIPAAm) and shown low energy of activation (18.0 kJ mol(-1)) for graft copolymerization within the temperature range of 10-35 degrees C as determined with Arrhenius plot. The PNIPAAm-grafted cellulose has shown improved thermal stability and shown temperature-dependent degree of swelling. Variation in degree of swelling of PNIPAAm-grafted cellulose as a function of temperature has been used to determine LCST of PNIPAAm-grafted cellulose. The contact angle (theta) has shown variation on increasing the graft yield and temperature. On the basis of experimental observations, the reaction steps for graft copolymerization have been proposed and a rate expression has been derived.     

Chiral chemical absorption property of a cross-linked poly(N-isopropyl acrylamide-co-sodium acrylate) thermoresponsive smart gel

This investigation leads to the chiral chemical absorption property of a thermoresponsive gel material. d ‐(+)‐α‐phenyl ethyl amine was taken as the chiral chemical. The gel material was synthesized by polymerizing 1:1 mole ratio of N‐isopropyl acrylamide and Na‐acrylate along with methylene bisacrylamide (2 wt.% of total monomer) as a cross‐linker using ammonium persulfate as an initiator and N, N, N′, N′‐tetra‐methyl ethylene diamine as an accelerator. The microporous nature of the gel material is observed by scanning electron microscope as well as by surface analysis. It is a pH as well as thermoresponsive gel. The highest gel swelling is observed at around pH 8.2 at room temperature (30 °C). The gel contains carboxylate (―COO^?) group in this slightly alkaline condition. In the ionic state, the mutual repulsion of the ionic groups helps in swelling the gel. The lower critical solution temperature (LCST) of the gel is observed to be about 38 °C, which is higher than that of poly N‐isopropyl acrylamide itself (32 °C). This corroborates with the theory and other reported results that LCST increases with the incorporation of ionic moiety in the cross‐linked copolymer. The chiral chemical absorption of the gel material was monitored by measuring circular dichroism of the chiral compound in the presence and absence of gel using a circular dichroism spectropolarimeter (J‐810 L) (JASCO International Co., Ltd., Tokyo, Japan). About 18% of d ‐(+)‐α‐phenyl ethyl amine is absorbed from its aqueous solution by 0.01 g of dry gel material (particle size: 106–212 µm) at room temperature. The absorption of the chiral compound is reversible with temperature having a sudden jump at LCST (38 °C) of the gel material. Chirality 24:506–511, 2012. © 2012 Wiley Periodicals, Inc.     

Poly(N-isopropylacrylamide-co-propylacrylic acid) copolymers that respond sharply to temperature and pH

Temperature- and pH-sensitive random copolymers of N-isopropylacrylamide (NIPAAm) and propylacrylic acid (PAA) were prepared using the reversible addition fragmentation chain transfer (RAFT) polymerization method. The lower critical solution temperatures (LCSTs) (or phase separation temperatures) of the NIPAAm-co-PAA copolymer solutions were measured by the cloud-point method. At slightly acidic conditions, the LCST decreased with increase in PAA content, which suggests that the hydrophobic propyl group of PAA has a greater influence on the LCST than the polar carboxylic acid group at those conditions. An increase of pH led to a significant increase in LCST of the copolymers due to the ionization of the -COOH group. The LCSTs were studied as a function of copolymer composition over the pH range from 5.0 to 7.0. Because the pK(a) of the polymers can be tuned to fall close to neutral pH, these polymer compositions can be designed to have phase transitions triggered near physiological pH or at slightly acidic pH values that fall within acidic gradients found in biology. The NIPAAm-co-PAA copolymers thus display tunable properties that could make them useful in a variety of molecular switching and drug delivery applications where responses to small pH changes are relevant.     

In situ harvesting of adhered target cells using thermoresponsive substrate under a microscope: principle and instrumentation

A novel technique and instrumented device were developed to harvest target cells from multicellular mixture of different cell types under a microscope. The principle of the technique is that cells cultured on a thermoresponsive-substance-coated dish were detached by a region-specific cooling device and simultaneously harvested using a micropipette, both of which were assembled in an inverted microscope. Thermoresponsive coating consists of the mixture of poly(N-isopropylacrylamide) (PNIPAAm) and PNIPAAm-grafted gelatin. The former non-cell-adhesive polymer dissolves below at 32.1 degrees C in water and precipitates over that temperature (called lower critical solution temperature, LCST), and the latter cell-adhesive polymer has LCST of 34.1 degrees C. The appropriate mixing ratio of these thermoresponsive polymers exhibited high cell adhesion at physiological temperature and complete cell detachment at room temperature. A device developed as to cool at only a tiny area of the bottom of the dish, beneath which a cell that was targeted under a microscope, was assembled in a microscope. It was demonstrated that single cell or two cells that adhered to each other was detached from the surface and harvested by a micropipette within approximately 30s.     

Determination of excitatory amino acids in biological fluids by capillary electrophoresis with optical fiber light-emitting diode induced fluorescence detection

The capillary electrophoresis (CE) system with optical fiber light-emitting diode (optical fiber LED) induced fluorescence detector was developed for the analysis of the excitatory amino acids (EAAs) tagged with naphthalene-2,3-dicarboxaldehyde (NDA). The separation of EAAs was carried out in an uncoated fused-silica capillary (50 cm x 75 microm i.d.) with a buffer of 10 mM borate at pH 9.3 and an applied voltage of 20 kV. High sensitivity was obtained by the use of optical fiber LED induced fluorescence detector with a violet LED as the excitation light source. The limits of detection (S/N = 3) for glutamic acid (Glu) and aspartic acid (Asp) were 2.1 x 10(-8) and 2.3 x 10(-8) M, respectively. The detection approach was successfully applied to the analysis of Glu and Asp in biological fluids including human serum, rabbit serum and human cerebrospinal fluid (CSF) with satisfactory results.     

Hydrophobic benzoic acids as inhibitors of influenza neuraminidase

Neuraminidase (NA) plays a critical role in the life cycle of influenza virus and is a target for new therapeutic agents. A new benzoic acid inhibitor (11) containing a lipophilic side chain at C-3 and a guanidine at C-5 was synthesized. The X-ray structure of 4-(N-acetylamino)-5-guanidino-3-(3-pentyloxy)benzoic acid in complex with NA revealed that the lipophilic side chain binds in a newly created hydrophobic pocket formed by the movement of Glu 278 to interact with Arg 226, whereas the guanidine of 11 interacts in a negatively charged pocket created by Asp 152, Glu 120 and Glu 229. Compound 11 was highly selective for type A (H2N2) influenza NA (IC50 1 microM) over type B (B/Lee/40) influenza NA (IC50 500 microM).     

Mutagenic and enzymological studies of the hydratase and isomerase activities of 2-enoyl-CoA hydratase-1

Structural and enzymological studies have shown the importance of Glu144 and Glu164 for the catalysis by 2-enoyl-CoA hydratase-1 (crotonase). Here we report about the enzymological properties of the Glu144Ala and Glu164Ala variants of rat mitochondrial 2-enoyl-CoA hydratase-1. Size-exclusion chromatography and CD spectroscopy showed that the wild-type protein and mutants have similar oligomerization states and folding. The kcat values of the active site mutants Glu144Ala and Glu164Ala were decreased about 2000-fold, but the Km values were unchanged. For study of the potential intrinsic Delta3-Delta2-enoyl-CoA isomerase activity of mECH-1, a new assay using 2-enoyl-CoA hydratase-2 and (R)-3-hydroxyacyl-CoA dehydrogenase as auxiliary enzymes was introduced. It was demonstrated that rat wild-type mECH-1 is also capable of catalyzing isomerization with the activity ratio (isomerization/hydration) of 1/5000. The kcat values of isomerization in Glu144Ala and Glu164Ala were decreased 10-fold and 1000-fold, respectively. The data are in line with the proposal that Glu164 acts as a protic amino acid residue for both the hydration and the isomerization reaction. The structural factors favoring the hydratase over the isomerase reaction have been addressed by investigating the enzymological properties of the Gln162Ala, Gln162Met, and Gln162Leu variants. The Gln162 side chain is hydrogen bonded to the Glu164 side chain; nevertheless, these mutants have enzymatic properties similar to that of the wild type, indicating that catalytic function of the Glu164 side chain in the hydratase and isomerase reaction does not depend on the interactions with the Gln162 side chain.     

Degradable thermoresponsive nanogels for protein encapsulation and controlled release

Reversible addition-fragmentation chain transfer (RAFT) polymerization technique was used for the fabrication of stable core cross-linked micelles (CCL) with thermoresponsive and degradable cores. Well-defined poly(2-methacryloyloxyethyl phosphorylcholine), poly(MPC) macroRAFT agent, was first synthesized with narrow molecular weight distribution via the RAFT process. These CCL micelles (termed as nanogels) with hydrophilic poly(MPC) shell and thermoresponsive core consisting of poly(methoxydiethylene glycol methacrylate) (poly(MeODEGM) and poly(2-aminoethyl methacrylamide hydrochloride) (poly(AEMA) were then obtained in a one-pot process by RAFT polymerization in the presence of an acid degradable cross-linker. These acid degradable nanogels were efficiently synthesized with tunable sizes and low polydispersities. The encapsulation efficiencies of the nanogels with different proteins such as insulin, BSA, and β-galactosidase were studied and found to be dependent of the cross-linker concentration, size of protein, and the cationic character of the nanogels imparted by the presence of AEMA in the core. The thermoresponsive nature of the synthesized nanogels plays a vital role in protein encapsulation: the hydrophilic core and shell of the nanogels at low temperature allow easy diffusion of the proteins inside out and, with an increase in temperature, the core becomes hydrophobic and the nanogels are easily separated out with entrapped protein. The release profile of insulin from nanogels at low pH was studied and results were analyzed using bicinchoninic assay (BCA). Controlled release of protein was observed over 48 h.     

Role of the covalent glutamic acid 242-heme linkage in the formation and reactivity of redox intermediates of human myeloperoxidase

In human myeloperoxidase the heme is covalently attached to the protein via two ester linkages between the carboxyl groups of Glu242 and Asp94 and modified methyl groups on pyrrole rings A and C of the heme as well as a sulfonium ion linkage between the sulfur atom of Met243 and the beta-carbon of the vinyl group on pyrrole ring A. In the present study, wild-type recombinant myeloperoxidase (recMPO) and the variant Glu242Gln were produced in Chinese hamster ovary cells and investigated in a comparative sequential-mixing stopped-flow study in order to elucidate the role of the Glu242-heme ester linkage in the individual reaction steps of both the halogenation and peroxidase cycle. Disruption of the ester bond increased heme flexibility, blue shifted the UV-vis spectrum, and, compared with recMPO, decelerated cyanide binding (1.25 x 10(4) versus 1.6 x 10(6) M(-)(1) s(-)(1) at pH 7 and 25 degrees C) as well as compound I formation mediated by either hydrogen peroxide (7.8 x 10(5) versus 1.9 x 10(7) M(-)(1) s(-)(1)) or hypochlorous acid (7.5 x 10(5) versus 2.3 x 10(7) M(-)(1) s(-)(1)). The overall chlorination and bromination activity of Glu242Gln was 2.0% and 24% of recMPO. The apparent bimolecular rate constants of compound I reduction by chloride (65 M(-)(1) s(-)(1)), bromide (5.4 x 10(4) M(-)(1) s(-)(1)), iodide (6.4 x 10(5) M(-)(1) s(-)(1)), and thiocyanate (2.2 x10(5) M(-)(1) s(-)(1)) were 500, 25, 21, and 63 times decreased compared with recMPO. By contrast, Glu242Gln compound I reduction by tyrosine was only 5.4 times decreased, whereas tyrosine-mediated compound II reduction was 60 times slower compared with recMPO. The effects of exchange of Glu242 on electron transfer reactions are discussed.     

Biocompatible, biodegradable and thermo-sensitive chitosan-g-poly (N-isopropylacrylamide) nanocarrier for curcumin drug delivery

A nano formulation of curcumin loaded biodegradable thermoresponsive chitosan-g-poly (N-isopropylacrylamide) co-polymeric nanoparticles (TRC-NPs) (150 nm) were prepared by ionic cross-linking method and characterized. The in vitro drug release was prominent at above LCST. Cytocompatibility of TRC-NPs (100-1000 μg/ml) on an array of cell line is proved by MTT assay. The drug loaded TRC-NPs showed specific toxicity on cancer cells. The cell uptake studies were confirmed by fluorescent microscopy. Flowcytometric analysis of curcumin loaded TRC-NPs showed increased apoptosis on PC3 cells. These results indicated that TRC-NPs could be a potential nanovehicle for curcumin drug delivery.     

Ab initio molecular orbital study on the effects of zinc ion,its ligands and ionic amino acid residues for proton transfer energetics between glu 270 and Zn co-ordinated water molecule in carboxypeptidase A

Thezinc-water-Glu 270 system was reported from the X-ray crystallographic study of native carboxypeptidase A(CPA) (Lipscomb et al., 1968). General base catalysis by the γ-carboxylate of Glu 270 was proposed for peptidase activity of CPA. The effects of zinc ion and its ligands (Glu 72, His 69-Asp 142, His 196) for proton transfer between Glu 270 and Zn co-ordinated water molecule in CPA were studied by the ab initio SCFLCAO-MO method. The results show that the proton transfer from the Zn co-ordinated water molecule to the γ-carboxylate of Glu 270 is greatly promoted by the Zn ion and, conversely, is greatly inhibited by its ligands. The facilitation effect of Zn ion and the inhibition effect of its ligands for the proton transfer were analysed by using the energy decomposition analysis. Moreover, calculations including all side chains of ionic amino acid residues and main chain residues in CPA as point fractional charges were performed. The results show that the proton transfer is affected by the ionic amino acid residues and is not affected by the main chain residues.     

Aspartic acid 405 contributes to the substrate specificity of aminopeptidase B

Aminopeptidase B (EC 3.4.11.6, ApB) specifically cleaves in vitro the N-terminal Arg or Lys residue from peptides and synthetic derivatives. Ap B was shown to have a consensus sequence found in the metallopeptidase family. We determined the putative zinc binding residues (His324, His328, and Glu347) and the essential Glu325 residue for the enzyme using site-directed mutagenesis (Fukasawa, K. M., et al. (1999) Biochem. J. 339, 497-502). To identify the residues binding to the amino-terminal basic amino acid of the substrate, rat cDNA encoding ApB was cloned into pGEX-4T-3 so that recombinant protein was expressed as a GST fusion protein. Twelve acidic amino acid residues (Glu or Asp) in ApB were replaced with a Gln or Asn using site-directed mutagenesis. These mutants were isolated to characterize the kinetic parameters of enzyme activity toward Arg-NA and compare them to those of the wild-type ApB. The catalytic efficiency (kcat/Km) of the mutant D405N was 1.7 x 10(4) M(-1) s(-1), markedly decreased compared with that of the wild-type ApB (6.2 x 10(5) M(-1) s(-1)). The replacement of Asp405 with an Asn residue resulted in the change of substrate specificity such that the specific activity of the mutant D405N toward Lys-NA was twice that toward Arg-NA (in the case of wild-type ApB; 0.4). Moreover, when Asp405 was replaced with an Ala residue, the kcat/Km ratio was 1000-fold lower than that of the wild-type ApB for hydrolysis of Arg-NA; in contrast, in the hydrolysis of Tyr-NA, the kcat/Km ratios of the wild-type (1.1 x 10(4) M(-1) s(-1)) and the mutated (8.2 x 10(3) M(-1) s(-1)) enzymes were similar. Furthermore, the replacement of Asp-405 with a Glu residue led to the reduction of the kcat/Km ratio for the hydrolysis of Arg-NA by a factor of 6 and an increase of that for the hydrolysis of Lys-NA. Then the kcat/Km ratio of the D405E mutant for the hydrolysis of Lys-NA was higher than that for the hydrolysis of Arg-NA as opposed to that of wild-type ApB. These data strongly suggest that the Asp 405 residue is involved in substrate binding via an interaction with the P1 amino group of the substrate's side chain.     

alpha-Carboxyl-linked glutamates in the folylpolyglutamates of Escherichia coli

Folate cofactors in most cells contain polyglutamate side chains, which since the late 1940s have been assumed to be linked via their gamma-COOH groups. We report here an investigation of the structure of the polyglutamate chain attached to the folates of Escherichia coli. Folates were extracted from E. coli grown with [7-14C] p-aminobenzoate and cleaved to p-aminobenzoyl polyglutamates of varying chain lengths (pAB(Glu)n) by the method of Foo et al. (Foo, S. K., Cichowicz, D. J., and Shane, B. (1980) Anal. Biochem. 107, 109-115). The pAB(Glu)n derived from E. coli did not co-chromatograph with chemically synthesized pAB(gamma-Glu)n-Glu on several high performance liquid chromatography (HPLC) systems, except for the triglutamate which did elute with pAB(gamma-Glu)2-Glu. E. coli-derived pAB(Glu)3-8 were purified by HPLC on C18 columns eluted with acetonitrile/trifluoroacetic acid, and the structures were determined through mass spectrometry, chiral amino acid analysis, and peptidase digestion experiments. Molecular weight determinations on the methyl ester derivatives of E. coli-derived pAB(Glu)n by liquid secondary ion mass spectrometry and sequence analysis using collision-activated dissociation on a tandem mass spectrometer confirmed the structures as pAB(Glu)3-8. Chiral HPLC of hydrolyzed and dansylated E. coli-derived materials, on a beta-cyclodextrin column, identified the glutamate as the L-enantiomer. pAB(Glu)n were digested with carboxypeptidase Y, which specifically cleaved glutamates linked at their alpha-carboxyls; E. coli-derived pAB(Glu)4-8 (but not synthetic pAB(gamma-Glu1-6-Glu) were sequentially digested to pAB(gamma-Glu)2-Glu. Thus, in E. coli folylpolyglutamates, glutamate residues 4-8 were each linked to the polyglutamate chain at the alpha-carboxyl of the preceding glutamate.