A novel post‐ligation thioesterification device enables peptide ligation in the N to C direction: synthetic study of human glycodelin

Human glycodelin consists of 162 amino acid residues and two N‐linked glycans at Asn²⁸ and Asn⁶³. In this study, we synthesized it by a fully convergent strategy using native chemical ligation (NCL) in N to C direction. The four peptide segments corresponding to 1–31, 32–65, 66–105 and 106–162 sequences were synthesized by 9‐fluorenylmethoxycarbonyl based solid‐phase peptide synthesis. At the C‐terminus of the second segment, N‐ethyl‐S‐acetamidomethyl‐cysteine was attached as a post‐ligation thioesterification device. The N‐terminal two segments were condensed by the homocysteine‐mediated NCL at Leu‐Met site, and the product was methylated to convert homocysteine to methionine. After deprotection of acetamidomethyl group on the N‐ethylcysteine residue, the peptide was thioesterified by N‐alkylcysteine‐assisted method. The product was then ligated with the C‐terminal half, which was obtained by the NCL of third and fourth segments, to give the full‐length glycodelin. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Investigation toward multi-epitope vaccine candidates using native chemical ligation

We applied native chemical ligation (NCL) method to the synthesis of highly pure lipid-core peptide (LCP) vaccines to attach various peptide epitopes. In the case of the synthesis of LCP vaccine with two different peptide epitopes, LCP moieties having two free Cys and two protected Cys derivatives (S-acetamidemethyl-Cys, (Cys(Acm)), N-methylsulfonylethyloxycarbonyl-Cys (Msc-Cys), or 1,3-thiazolidine-4-carboxylic acid (Thz)) on oligolysine branches were prepared in order to couple two different epitopes by stepwise NCL. It was found that the difficulty in NCL of first two peptide antigen was associated with the steric hindrance. Using Thz instead of Cys(Acm) and Msc-Cys was important to reduce the steric hindrance and improve NCL yield.     

Thiocarbamate‐linked peptides by chemoselective peptide ligation

Peptide chemical ligation chemistries, which allow the chemoselective coupling of unprotected peptide fragments, are useful tools for synthesizing native polypeptides or unnatural peptide‐based macromolecules. We show here that the phenylthiocarbonyl group can be easily introduced into peptides on α or ε amino groups using phenylthiochloroformate and standard solid‐phase method. It reacts chemoselectively with cysteinyl peptides to give an alkylthiocarbamate bond. S,N‐shift of the alkylaminocarbonyl group from the Cys side chain to the α‐amino group did not occur. The method was used for linking two peptide chains through their N‐termini, for the synthesis of a cyclic peptide or for the synthesis of di‐ or tetravalent multiple antigenic peptides (MAPs). Thiocarbamate ligation is thus complementary to thioether, thioester or disulfide ligation methods. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Chemical synthesis of La1 isolated from the venom of the scorpion Liocheles australasiae and determination of its disulfide bonding pattern

La1 is a 73‐residue cysteine‐rich peptide isolated from the scorpion Liocheles australasiae venom. Although La1 is the most abundant peptide in the venom, its biological function remains unknown. Here, we describe a method for efficient chemical synthesis of La1 using the native chemical ligation (NCL) strategy, in which three peptide components of less than 40 residues were sequentially ligated. The peptide thioester necessary for NCL was synthesized using an aromatic N‐acylurea approach with Fmoc‐SPPS. After completion of sequential NCL, disulfide bond formation was carried out using a dialysis method, in which the linear peptide dissolved in an acidic solution was dialyzed against a slightly alkaline buffer to obtain correctly folded La1. Next, we determined the disulfide bonding pattern of La1. Enzymatic and chemical digests of La1 without reduction of disulfide bonds were analyzed by liquid chromatography/mass spectrometry (LC/MS), which revealed two of four disulfide bond linkages. The remaining two linkages were assigned based on MS/MS analysis of a peptide fragment containing two disulfide bonds. Consequently, the disulfide bonding pattern of La1 was found to be similar to that of a von Willebrand factor type C (VWC) domain. To our knowledge, this is the first report of the experimental determination of the disulfide bonding pattern of peptides having a single VWC domain as well as their chemical synthesis. La1 synthesized in this study will be useful for investigation of its biological role in the venom. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Structure and electrochemistry of proteins harboring iron-sulfur clusters of different nuclearities. Part IV. Canonical,non-canonical and hybrid iron-sulfur proteins

A plethora of proteins are able to express iron-sulfur clusters, but have a clear picture of the different types of proteins and the different iron-sulfur clusters they harbor it is not easy.In the last five years we have reviewed structure/electrochemistry of metalloproteins expressing: (i) single types of iron-sulfur clusters (namely: {Fe(Cys)₄}, {[Fe₂S₂](Cys)₄}, {[Fe₂S₂](Cys)₃(X)} (X?=?Asp, Arg, His), {[Fe₂S₂](Cys)₂(His)₂}, {[Fe₃S₄](Cys)₃}, {[Fe₄S₄](Cys)₄} and {[Fe₄S₄](Cys)₃(nonthiolate ligand)} cores); (ii) metalloproteins harboring iron-sulfur centres of different nuclearities (namely: [4Fe-4S] and [2Fe-2S], [4Fe-4S] and [3Fe-4S], and [4Fe-4S], [3Fe-4S] and [2Fe-2S] clusters. Our target is now to review structure and electrochemistry of proteins harboring canonical, non-canonical and hybrid iron-sulfur proteins.     

Formation mechanism of cross‐linking Maillard compounds in peptide–xylose systems

The formation mechanism of Maillard peptides was explored in Maillard reaction through diglycine/glutathione(GSH)/(Cys‐Glu‐Lys‐His‐Ile‐Met)–xlyose systems by heating at 120 °C for 30–120 min. Maximum fluorescence intensity of Maillard reaction products (MRPs) with an emission wavelength of 420~430 nm in all systems was observed, and the intensity values were proportional to the heating time. Taken diglycine/GSH–[¹³C₅]xylose systems as a control, it was proposed that the compounds with high m/z values of 379 and 616 have the high molecular weight (HMW) products formed by cross‐linking of peptides and sugar. In (Cys‐Glu‐Lys‐His‐Ile‐Met)–xylose system, the m/z value of HMW MRPs was not observed, which might be due to the weak signals of these products. According to the results of gel permeation chromatography, HMW MRPs were formed by Maillard reaction, especially in (Cys‐Glu‐Lys‐His‐Ile‐Met)–xylose system, the percentage of Maillard peptides reached 52.90%. It was concluded that Maillard peptides can be prepared through the cross‐linking of sugar and small peptides with a certain MW range. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Tetrathionate stimulated growth of Campylobacter jejuni identifies a new type of bi‐functional tetrathionate reductase (TsdA) that is widely distributed in bacteria

Tetrathionate (S₄O₆^2?) is used by some bacteria as an electron acceptor and can be produced in the vertebrate intestinal mucosa from the oxidation of thiosulphate (S₂O₃^2?) by reactive oxygen species during inflammation. Surprisingly, growth of the microaerophilic mucosal pathogen Campylobacter jejuni under oxygen‐limited conditions was stimulated by tetrathionate, although it does not possess any known type of tetrathionate reductase. Here, we identify a dihaem cytochrome c (C8j_0815; TsdA) as the enzyme responsible. Kinetic studies with purified recombinant C. jejuni TsdA showed it to be a bifunctional tetrathionate reductase/thiosulphate dehydrogenase with a high affinity for tetrathionate. A tsdA null mutant still slowly reduced, but could not grow on, tetrathionate under oxygen limitation, lacked thiosulphate‐dependent respiration and failed to convert thiosulphate to tetrathionate microaerobically. A TsdA paralogue (C8j_0040), lacking the unusual His–Cys haem ligation of TsdA, had low thiosulphate dehydrogenase and tetrathionate reductase activities. Our data highlight a hitherto unrecognized capacity of C. jejuni to use tetrathionate and thiosulphate in its energy metabolism, which may promote growth in the host. Moreover, as TsdA represents a new class of tetrathionate reductase that is widely distributed among bacteria, we predict that energy conserving tetrathionate respiration is far more common than currently appreciated.     

Carbon‐11 radiolabeling of an oligopeptide containing tryptophan hydrochloride via a Pictet‐Spengler reaction using carbon‐11 formaldehyde

A procedure for the synthesis of a¹¹C‐labeled oligopeptide containing [1‐¹¹C]1,2,3,4‐tetrahydro‐β‐carboline‐3‐carboxylic acid ([1‐¹¹C]Tpi) from the corresponding Trp?HCl‐containing peptides has been developed involving a Pictet‐Spengler reaction with [¹¹C]formaldehyde. The synthesis of [1‐¹¹C]Tpi from Trp and [¹¹C]formaldehyde was examined as a model reaction with the aim of developing a facile and effective method for the labeling of peptides with carbon‐11. The Pictet‐Spengler reaction of Trp and [¹¹C]formaldehyde in acidic media (TsOH or HCl) afforded the desired [1‐¹¹C]Tpi in a moderate radiochemical yield. Herein, the application of a Pictet‐Spengler reaction to an aqueous solution of Trp?HCl gave the desired product with a radiochemical yield of 45.2%. The RGD peptide cyclo[Arg‐Gly‐Asp‐D‐Tyr‐Lys] was then selected as a substrate for the labeling reaction with [¹¹C]formaldehyde. The radiolabeling of a Trp?HCl‐containing RGD peptide using the Pictet‐Spengler reaction was successful. Furthermore, the remote‐controlled synthesis of a [1‐¹¹C]Tpi‐containing RGD peptide was attempted by using an automatic production system to generate [¹¹C]CH₃I. The radiochemical yield of the [1‐¹¹C]Tpi‐containing RGD at the end of synthesis (EOS) was 5.9 ± 1.9% (n = 4), for a total synthesis time of about 35 min. The specific activity was 85.7 ± 9.4 GBq/µmol at the EOS. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Topology of the disulfide bonds in the antiviral lectin scytovirin

The antiviral lectin scytovirin (SVN) contains a total of five disulfide bonds in two structurally similar domains. Previous reports provided contradictory results on the disulfide pairing in each individual domain, and we have now re‐examined the disulfide topology. N‐terminal sequencing and mass spectrometry were used to analyze proteolytic fragments of native SVN obtained at acidic pH, yielding the assignment as Cys7–Cys55, Cys20–Cys32, Cys26–Cys38, Cys68–Cys80, and Cys74–Cys86. We also analyzed the N‐terminal domain of SVN (SD1, residues 1–48) prepared by expression/oxidative folding of the recombinant protein and by chemical synthesis. The disulfide pairing in the chemically synthesized SD1 was forced into predetermined topologies: SD1A (Cys20–Cys26, Cys32–Cys38) or SD1B (Cys20–Cys32, Cys26–Cys38). The topology of native SVN was found to be in agreement with the SD1B and the one determined for the recombinant SD1 domain. Although the two synthetic forms of SD1 were distinct when subjected to chromatography, their antiviral properties were indistinguishable, having low nM activity against HIV. Tryptic fragments, the “cystine clusters” [Cys20–Cys32/Cys26–Cys38; SD1] and [Cys68–Cys80/Cys74–C‐86; SD2], were found to undergo rapid disulfide interchange at pH 8. This interchange resulted in accumulation of artifactual fragments in alkaline pH digests that are structurally unrelated to the original topology, providing a rational explanation for the differences between the topology reported herein and the one reported earlier (Bokesh et al., Biochemistry 2003;42:2578–2584). Our observations emphasize the fact that proteins such as SVN, with disulfide bonds in close proximity, require considerable precautions when being fragmented for the purpose of disulfide assignment.     

Interaction of apolipoprotein[a] with apolipoproteinB-100 Cys3734 region in lipoprotein[a] is confirmed immunochemically

Monospecific polyclonal antibodies (MPAbs) to apoB-100 regions Cys3734 and Cys4190 were isolated by affinity chromatography using the synthetic polypeptides, Q₃₇₃₀VPSSKLDFREIQIYKK₃₇₄₆ and G₄₁₈₂IYTREELSTMFIREVG₄₁₉₈, respectively, coupled to a hydrophilic resin. Molecular modeling and fluroescence labeling studies have suggested that Cys67 located in kringle type 9 (LPaK9, located between residues 3991 and 4068 of the apo[a] sequence inferred by cDNA) of the apo[a] molecule is disulfide linked to Cys3734 of apoB-100 in human lipoprotein[a] (Lp[a]). This possibility has been further explored with MPAbs. Four species of MPAbs directed to a Cys3734 region of apoB-100 (3730–3746) were isolated from goat anti-human LDL serum by a combination of synthetic peptide (Q₃₇₃₀VPSSKLDFREIQIYKK₃₇₄₆) affinity chromatography and preparative electrophoresis (electrochromatography). MPAbs to the Cys4190 region of apoB-100, a second or alternative disulfide link-site between apo[a] and apoB-100, were also isolated using a synthetic peptide (G₄₁₈₂IYTREELSTMFIREVG₄₁₉₈) affinity resin. Results of immunoassays showed that binding of these four MPAbs to Lp[a] was significantly lower than to LDL. In contrast, MPAbs to the apoB-100 region 4182–4198 which contains Cys4190, a second or alternative disulfide link-site between apo[a] and apoB-100, displayed a less significant difference in binding to Lp[a] and LDL. These results provide additional evidence that the residues 3730–3746 of apoB-100 interact significantly with apo[a] in Lp[a], and that Cys3734 is a likely site for the disulfide bond connecting apo[a] and apoB-100.Abbreviations amino acids single letter, e.g., alanine, A, etc. - BSA bovine serum albumin - d density (g/ml) - aca -aminocaproic acid - ELISA enzyme-linked immunosorbant assay - DTT dithiothreitol - HRP horseradish peroxidase - MAb monoclonal antibody - MPAb monospecific polyclonal antibody - PAGE polyacrylamide gel electrophoresis - PMSF phenylmethylsulfonyl fluoride - SDS sodium dodecyl sulfate - Na₂EDTA sodium ethylenediaminetetraacetate - NaN₃ sodium azide - TRIS (hydroxymethyl)aminomethane     

Glycerol‐induced folding of unstructured disulfide‐deficient lysozyme into a native‐like conformation

2SS[6‐127,64‐80] variant of lysozyme which has two disulfide bridges, Cys6‐Cys127 and Cys64‐Cys80, and lacks the other two disulfide bridges, Cys30‐Cys115 and Cys76‐Cys94, was quite unstructured in water, but a part of the polypeptide chain was gradually frozen into a native‐like conformation with increasing glycerol concentration. It was monitored from the protection factors of amide hydrogens against H/D exchange. In solution containing various concentrations of glycerol, H/D exchange reactions were carried out at pH* 3.0 and 4°C. Then, ¹H‐¹⁵N‐HSQC spectra of partially deuterated protein were measured in a quenching buffer for H/D exchange (95% DMSO/5% D₂O mixture at pH* 5.5 adjusted with dichloroacetate). In a solution of 10% glycerol, the protection factors were nearly equal to 10 at most of residues. With increasing glycerol concentration, some selected regions were further protected, and their protection factors reached about a 1000 in 30% glycerol solution. The highly protected residues were included in A‐, B‐, and C‐helices and β3‐strand, and especially centered on Ile 55 and Leu 56. In 2SS[6‐127,64‐80], long‐range interactions were recovered due to the preferential hydration by glycerol in the hydrophobic box of the α‐domain. Glycerol‐induced recovering of the native‐like structure is discussed from the viewpoint of molten globules growing with the protein folding. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 665–675, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Synthesis of a Double Transmembrane Domain Fragment of Ste2p by Native Chemical Ligation

Native chemical ligation (NCL) approaches have been applied extensively to soluble proteins. Fewer successes have been achieved with membrane peptides. In this report, the synthesis and semisynthesis by NCL of peptides corresponding to 1.7 transmembrane domains of the α-factor receptor from Saccharomyces cerevisiae is described. Synthesis was achieved when the ligation point was approximately in the middle of the loop joining the two transmembrane regions. In contrast, little to no ligation was observed when the ligation point was at the putative membrane interface of the sixth transmembrane domain (TM6) and the third extracellular loop (EL3). Ligations of a chemically synthesized 22-residue thioester with a synthetic 29-residue N-Cys peptide and a biosynthetic 73-residue N-Cys peptide were successfully achieved in both trifluoroethanol/guanidinium hydrochloride (TFE/GnHCl) and sodium dodecyl sulfate (SDS) media when mercaptoethanesulfonic acid (MESNA) was used as a catalyst. The resulting 51-residue and 95-residue ligation products were purified by reversed phase HPLC and recovered on a mg scale. Both peptides were >95% pure as determined by HPLC and had the expected molecular weight as judged by mass spectrometry. Segmental labeling of the 95-residue fragment, in which the N-Cys portion was [¹⁵N] labeled, resulted in a peptide that gave an NMR spectrum which was comparable to that of the unligated 73-residue peptide alone. R B Merrifield personified the finest qualities of a human being. He was an outstanding individual who influenced the way research is conducted by tens of thousands of scientists. At the same time he was a warm, humble, sincere man who was extremely kind and generous. I (FN) personally saw his generosity during a seminar he invited me to give at Rockefeller University. He was already a Nobel laureate but he treated me as a colleague and the encouragement he offered concerning my research program was very important for my future in academia. It is an honor to be among the participants in a volume honoring his contributions to peptide science.     

Polymorphisms of stress-related genes and the risk of nonsyndromic cleft lip with or without cleft palate

BACKGROUND: Nonsyndromic cleft lip with or without cleft palate (NCL/P) is a common structural malformation with a complex and multifactorial etiology. It has been shown that maternal psychological stress in the periconceptional period can contribute to an increase in the risk of NCL/P affecting pregnancy. METHODS: Twenty‐four single nucleotide polymorphisms of 11 stress‐related genes (COMT, CRHR1, FKBP5, GABRA6, HSD11β2, MAOA, NPY, NR3C1, SERPINA6, SLC6A4, and TPH2) were investigated in 220 healthy mothers of children with facial clefts and 210 matched controls using restriction fragment‐length polymorphism and high‐resolution melting analysis. RESULTS: We found that polymorphisms in SLC6A4, TPH2, and SERPINA6 appear to be maternal factors increasing the risk of having a child with facial clefts. The closest correlations with NCL/P were found for the SLC6A4 rs2020942 and TPH2 rs10879357 gene variants (odds ratio [OR], 1.720; 95% confidence interval [CI], 1.158–2.553; p = 0.0069; p_trend = 0.0036; and OR, 1.837; 95% CI, 1.226–2.753, p = 0.0030, p_trend = 0.0057; respectively). Moreover, haplotype analysis revealed that several combinations of markers in SLC6A4, TPH2, and SERPINA6 might be significantly associated with the risk of NCL/P affected pregnancies. However, these associations were not statistically significant after correction for multiple testing. CONCLUSION: This study suggests that nucleotide variants of genes encoding components of the hypothalamus‐pituitary‐adrenal axis and serotoninergic system have a role in the etiology of NCL/P in the Polish population. SLC6A4, TPH2, and SERPINA6 might be novel candidate genes for this common congenital anomaly. Birth Defects Research (Part A), 2011. © 2011 Wiley‐Liss, Inc.     

The "prismane" protein resolved: X-ray structure at 1.7 Å and multiple spectroscopy of two novel 4Fe clusters

The three-dimensional structure of the native "putative prismane" protein from Desulfovibrio vulgaris (Hildenborough) has been solved by X-ray crystallography to a resolution of 1.72?Å. The molecule does not contain a [6Fe-6S] prismane cluster, but rather two 4Fe clusters some 12?Å apart and situated close to the interfaces formed by the three domains of the protein. Cluster 1 is a conventional [4Fe-4S] cubane bound, however, near the N-terminus by an unusual, sequential arrangement of four cysteine residues (Cys 3, 6, 15, 21). Cluster 2 is a novel 4Fe structure with two μ₂-sulfido bridges, two μ₂-oxo bridges, and a partially occupied, unidentified μ₂ bridge X. The protein ligands of cluster 2 are widely scattered through the second half of the sequence and include three cysteine residues (Cys 312, 434, 459), one persulfido-cysteine (Cys 406), two glutamates (Glu 268, 494), and one histidine (His 244). With this unusual mixture of bridging and external type of ligands, cluster 2 is named the "hybrid" cluster, and its asymmetric, open structure suggests that it could be the site of a catalytic activity. X-ray absorption spectroscopy at the Fe K-edge is readily interpretable in terms of the crystallographic model when allowance is made for volume contraction at 10?K; no Fe··Fe distances beyond 3.1?Å could be identified. EPR, Mössbauer and MCD spectroscopy have been used to define the oxidation states and the magnetism of the clusters in relation to the crystallographic structure. Reduced cluster 1 is a [4Fe-4S]¹⁺ cubane with S?=?3/2; it is the first biological example of a "spin-admixed" iron-sulfur cluster. The hybrid cluster 2 has four oxidation states from (formally) all Fe^III to three Fe^II plus one Fe^III. The four iron ions are exchange coupled resulting in the system spins S?=?0, 9/2, 0 (and 4), 1/2, respectively, for the four redox states. Resonance Raman spectroscopy suggests that the bridging ligand X which could not be identified unambiguously in the crystal structure is a solvent-exchangeable oxygen.     

Structural insights into the enzyme catalysis from comparison of three forms of dissimilatory sulphite reductase from Desulfovibrio gigas

The crystal structures of two active forms of dissimilatory sulphite reductase (Dsr) from Desulfovibrio gigas, Dsr‐I and Dsr‐II, are compared at 1.76 and 2.05 Å resolution respectively. The dimeric α₂β₂γ₂ structure of Dsr‐I contains eight [4Fe–4S] clusters, two saddle‐shaped sirohaems and two flat sirohydrochlorins. In Dsr‐II, the [4Fe–4S] cluster associated with the sirohaem in Dsr‐I is replaced by a [3Fe–4S] cluster. Electron paramagnetic resonance (EPR) of the active Dsr‐I and Dsr‐II confirm the co‐factor structures, whereas EPR of a third but inactive form, Dsr‐III, suggests that the sirohaem has been demetallated in addition to its associated [4Fe–4S] cluster replaced by a [3Fe–4S] centre. In Dsr‐I and Dsr‐II, the sirohydrochlorin is located in a putative substrate channel connected to the sirohaem. The γ‐subunit C‐terminus is inserted into a positively charged channel formed between the α‐ and β‐subunits, with its conserved terminal Cysγ104 side‐chain covalently linked to the CHA atom of the sirohaem in Dsr‐I. In Dsr‐II, the thioether bond is broken, and the Cysγ104 side‐chain moves closer to the bound sulphite at the sirohaem pocket. These different forms of Dsr offer structural insights into a mechanism of sulphite reduction that can lead to S₃O₆^2?, S₂O₃^2? and S^2?.     

Assignment of disulphide bonds in synthetic endothelin-1 isomers by fast atom bombardment mass spectrometry.

Endothelin-1 (ET-1), a 21-residue vasoconstrictor peptide possessing four cysteinyl residues at positions 1, 3, 11 and 15, was synthesized by random oxidation of a tetrahydro-ET-1. On reverse-phase high-performance liquid chromatography, crude product was shown to be a mixture of two disulphide isomers. A method was developed to determine the disulphide structure of the isomers. The method consisted of (a) limited digestion with chymotrypsin, (b) cleavage with cyanogen bromide and (c) manual Edman degradation. Through this procedure, each isomer afforded specific fragments containing a single disulphide bond, which were identified by fast atom bombardment mass spectrometry. Isomer 1, the minor component, afforded a fragment containing Cys 3 and Cys 15, and isomer 2, the major component, afforded fragments containing Cys 3 and Cys 11. Since little disulphide exchange was observed, it could be concluded clearly that the disulphide bond pairs in isomer 1 were Cys 1-Cys 11 and Cys 3-Cys 15, while those in isomer 2 were Cys 1-Cys 15 and Cys 3-Cys 11 (the same as natural ET-1). The procedure was successfully applied to two synthetic analogues, [Gly18]-ET-1 and [Pro16]-ET-1.     

Apolipoprotein A-I-mimetic peptides with antioxidant actions

To augment antioxidant action of apolipoprotein A-I (Apo A-I)-mimetic peptide, the peptide F3,6,14,18 18A (DWFKAFYDKVAEKFKEAF) was modified by incorporating antioxidant amino acid residues. Introduction of His residue at position 2 or 3 at N-terminal of the peptide remarkably enhanced antioxidant action against Cu2+ oxidation of LDL and the capability of sequestering Cu2+. Likewise, the substitution of Ala for Cys residue at position 12 increased antioxidant action against Cu2+ oxidation of LDL. Additionally, the Cys substitution contributed to enhanced capabilities in the removal of hypochlorous acid (HOCl) and 13-hydroperoxyoctadecadienoic acid. Furthermore, the combined incorporation of His and Cys residues enhanced antioxidant actions in preventing Cu2+ oxidation and reducing HOCl and hydroperoxide levels. Separately, in solubilizing phosphatidylcholine, either peptides with His residue at N-terminal position 2 or 3, or those containing Cys residue at position 11 or 12 were equipotent to peptide F3,6,14,18 18A. Further, the lipid-solubilizing ability of those containing both His and Cys residues was comparable to that of peptide F3,6,14,18 18A. In support of this, a similar structural importance was observed with Trp fluorescence study illustrating the penetration of peptides in phosphatidylcholine liposome. Besides, the modified peptides were also comparable to peptide F3,6,14,18 18A in restoring phosphatidylserine-induced loss of PON1 activity. These results indicate that the insertion of His or Cys residue into peptide F3,6,14,18 18A at appropriate positions could lead to enhanced antioxidant action with no significant change of lipid-solubilizing action.     

Isopeptide method: development of S‐acyl isopeptide method for the synthesis of difficult sequence‐containing peptides

A novel strategy for a more efficient synthesis of difficult sequence‐containing peptides, the S‐acyl isopeptide method, was developed and successfully applied. A model pentapeptide Ac–Val–Val–Cys–Val–Val–NH₂ was synthesized via its water‐soluble S‐acyl isopeptide using an S‐acyl isodipeptide unit, Boc–Cys(Fmoc–Val)–OH. An S‐acyl isopeptide possessing excellent water solubility could be readily and quantitatively converted to the native peptide via an S N intramolecular acyl migration reaction at pH 7.4. Thus, the S‐acyl isopeptide method provides a useful tool in peptide chemistry. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.