Molecular architecture of membranes involved in excitation-contraction coupling of cardiac muscle

Peripheral couplings are junctions between the sarcoplasmic reticulum (SR) and the surface membrane (SM). Feet occupy the SR/SM junctional gap and are identified as the SR calcium release channels, or ryanodine receptors (RyRs). In cardiac muscle, the activation of RyRs during excitation-contraction (e-c) coupling is initiated by surface membrane depolarization, followed by the opening of surface membrane calcium channels, the dihydropyridine receptors (DHPRs). We have studied the disposition of DHPRs and RyRs, and the structure of peripheral couplings in chick myocardium, a muscle that has no transverse tubules. Immunolabeling shows colocalization of RyRs and DHPRs in clusters at the fiber's periphery. The positions of DHPR and RyR clusters change coincidentally during development. Freeze-fracture of the surface membrane reveals the presence of domains (junctional domains) occupied by clusters of large particles. Junctional domains in the surface membrane and arrays of feet in the junctional gap have similar sizes and corresponding positions during development, suggesting that both are components of peripheral couplings. As opposed to skeletal muscle, membrane particles in junctional domains of cardiac muscle do not form tetrads. Thus, despite their proximity to the feet, they do not appear to be specifically associated with them. Two observations establish the identify of the structurally identified feet arrays/junctional domain complexes with the immunocytochemically defined RyRs/DHPRs coclusters: the concomitant changes during development and the identification of feet as the cytoplasmic domains of RyRs. We suggest that the large particles in junctional domains of the surface membrane represent DHPRs. These observations have two important functional consequences. First, the apposition of DHPRs and RyRs indicates that most of the inward calcium current flows into the restricted space where feet are located. Secondly, contrary to skeletal muscle, presumptive DHPRs do not show a specific association with the feet, which is consistent with a less direct role of charge movement in cardiac than in skeletal e-c coupling.     

Foot structure and phylogeny in the Viverridae (Carnivora)

The structure of feet is widely used as a diagnostic feature in mammalian taxonomy. The relationship between the lengths of the metacarpals and foot pads are described with regard to plantigrade and digitigrade feet in the Viverridae. Although species in the Herpestinae, Paradoxurinae and Galidiinae vary considerably in size (from 450 g to 10 kg), the increase in length of the metapodial is isometric. Feet in which the metacarpals are less than 15 % of total limb length are plantigrade (Paradoxurinae and Cryptoproctinae) while those larger than 15% are digitigrade (Herpestinae and Galidiinae). The Viverrinae are composed of two natural groups, one in which the species have plantigrade forefeet and digitigrade hind feet and one in which both fore- and hind feet are digitigrade. The Hemigalinae does not appear to be a natural grouping, because the banded palm civet has plantigrade fore- and hind feet while other members of the subfamily have digitigrade feet; it may be better to reclassify the subfamily into three (Hemigalinae, Fossinae and Euplerinae).     

Further characterization of light and heavy sarcoplasmic reticulum vesicles. Identification of the ‘sarcoplasmic reticulum feet’ associated with heavy sarcoplasmic reticulum vesicles

Light and heavy sarcoplasmic reticulum vesicles were isolated from rabbit leg muscle using a combination of differential centrifugation and isophycnic zonal ultracentrifugation. Light sarcoplasmic reticulum vesicles obtained from the 30–32.5% and heavy sarcoplasmic reticulum vesicles obtained from the 38.5–42% sucrose regions of the linear sucrose gradient were determined to be free of surface and mitochondrial membrane contamination by marker enzyme analysis and electron microscopy. Thin sections of the light vesicles revealed empty vesicles of various sizes and shapes. Freeze-fracture replicas of the light vesicles showed an asymmetric distribution of intramembranous particles with the same orientation and distribution as the longitudinal sarcoplasmic reticulum in vivo. Heavy vesicles appeared as rounded vesicles of uniform size filled with electron dense material, similar to that seen in the terminal cisternae of the sarcoplasmic reticulum. The cytoplasmic surface of the membrane was decorated by membrane projections, closely resembling the ‘feet’ which join the sarcoplasmic reticulum to the transverse tubules in the intact muscle fiber. Freeze-fracture replicas of the heavy vesicles revealed an asymmetric distribution of particles which in some areas of the vesicle's surface are larger and less densely aggregated than those of the light vesicles. In the best quality replicas, some regions of the luminal leaflet were not smooth but showed evidence of pits. These structural details are characteristic of the area of sarcoplasmic reticulum membrane which is covered by the ‘feet’ in the intact muscle.Heavy vesicles contained greater than six times the calcium content of light vesicles, 54 vs. 9 nmol Ca²⁺/μl of water space. After KCl washing both contained less than 4 nmol Ca²⁺/μl of water space. Although they transported at the same rate and the same total amount of calcium, the rate of passive Ca²⁺ efflux from the heavy vesicles was double that of light vesicles. The higher rate of calcium efflux from the heavy vesicles was inhibited by dantrolene, an inhibitor of Ca²⁺ release. High resolution sodium dodecyl sulfate gel electrophoresis showed that the light vesicles contained predominantly Ca²⁺-ATPase along with several approx. 55 000-dalton proteins and a 5000-dalton proteolipid, while the heavy vesicles contained Ca²⁺-ATPase and calsequestrin along with several approx. 55 000-dalton proteins, extrinsic 34 000- and 38 000-dalton proteins, intrinsic 30 000- and 33 000-dalton proteins and two proteolipids of 5000 and 9000 daltons. KCl washing of the heavy vesicles removed both the approx. 34 000- and 38 000-dalton proteins, and the ‘sarcoplasmic reticulum feet’ were no longer seen on the heavy vesicles. The KCl supernatant was enriched in the 34 000- and 38 000-dalton proteins, indicating that these proteins are possible components of the sarcoplasmic reticulum feet. The biochemical and morphological data strongly support the view that the light vesicles are derived from the longitudinal sarcoplasmic reticulum and that the heavy vesicles are derived from the terminal cisternae containing junctional sarcoplasmic reticulum membrane with the intact ‘sarcoplasmic reticulum feet’.     

REGULAR STRUCTURES IN MEMBRANES : I. Membranes in the Endocytic Complex of Ileal Epithelial Cells

An "apical endocytic complex" in the ileal lining cells of suckling rats is described. The complex consists of a continuous network of membrane-limited tubules which originate as invaginations of the apical plasma membrane at the base of the microvilli, some associated vesicles, and a giant vacuole. The lumenal surface of this tubular network of membranes and associated vesicles is covered with a regular repeating particulate structure. The repeating unit is an ~7.5-nm diameter particle which has a distinct subunit structure composed of possibly nine smaller particles each ~3 nm in diameter. The ~7.5-nm diameter particles are joined together with a center-to-center separation of ~15 nm to form long rows. These linear aggregates, when arranged laterally, give rise to several square and oblique two-dimensional lattice arrangements of the particles which cover the surface of the membrane. Whether a square or oblique lattice is generated depends on the center-to-center separation of the rows and on the relative displacement of the particles in adjacent rows. Four membrane faces are revealed by fracturing frozen membranes of the apical tubules and vesicles: two complementary inner membrane faces exposed by the fracturing process and the lumenal and cytoplasmic membrane surfaces revealed by etching. The outer membrane face reveals a distinct array of membrane particles. This array also sometimes can be seen on the outer (B) fracture face and is sometimes faintly visible on the inner (A) fracture face. Combined data from sectioned, negatively stained, and freeze-etched preparations indicate that this regular particulate structure is a specialization that is primarily localized in the outer half of the membrane mainly in the outer leaflet.     

Endothelial plasmalemmal vesicles have a characteristic striped bipolar surface structure

Capillary endothelial cells have a large population of small (65-80 nm diameter in transmission electron microscopy) vesicles of which a large fraction is associated with the plasmalemma of the luminal and abluminal side. We studied the fine structure and distribution of these plasmalemmal vesicles by high resolution scanning electron microscopy in cultured endothelial cells obtained from bovine adrenal cortical capillaries. Cell monolayers were covered with polylysine-coated silicon chips, split in high potassium buffer, fixed in aldehyde mixtures, and then treated with OsO4 and thiocarbohydrazide. After critical point drying, the specimens were coated with a thin (less than 2 nm) continuous film of chromium. On the cytoplasmic aspect of the dorsal plasmalemmal fragments seen in such specimens, plasmalemmal vesicles appear as uniform vesicular protrusions approximately 70-90 nm in diameter, preferentially concentrated in distinct large fields in which they occur primarily as single units. Individual plasmalemmal vesicles exhibit a striped surface fine structure which consists of ridges approximately 10 nm in diameter, separated by furrows and oriented as meridians, often ending at two poles on opposite sides of the vesicles in a plane parallel to the plasmalemma. This striped surface structure is clearly distinct from the cage structure of coated pits found, at low surface density, on the same specimens. The cytoplasmic aspect of the plasmalemma proper is covered by a fibrillar infrastructure which does not extend over plasmalemmal vesicles but on which the latter appear to be anchored by fine filaments.     

Negatively stained 50 S ribosomal subunits of Escherichia coli

Ribosomes are large nucleoproteins of approximately 3 X 10(6) Mr. In contrast to helical or spherical nucleoproteins (viruses) of similar size (which consist of several hundred small asymmetric units reproduced by symmetry), ribosomes are completely asymmetric; therefore, the amount of structural information (defined by the number of independent image elements) necessarily increases from about 10 to 20 to about 1000 to 2000 (at resolutions of the order of 2 nm). With present techniques, only stained single particles can be studied in the electron microscope. Our published work on the 30 S subunit and on the 50 S subunit has demonstrated that three-dimensional reconstructions of stained single particles show a great number of structural details that are reproducible if the particles have the same orientation. One of the main results of this paper is the final proof of this reproducibility from detailed comparisons of individual 50 S subunits and of independent averages over a few (3 to 5) particles in the kidney or crown orientation; in the latter case, even after a chemical modification. The 50 S subunit is non-uniformly stained along the optical axis. It displays a complicated, stain-filled channel-like structure, within which is approximately the partial volume expected for the RNA. The particle shows an irregular but reproducible boundary surface against the stain. At several sites, the channel structure protrudes to the surface. Since the secondary structure of the RNA is well known, one might try to locate it in the subunit after chemical identification of its surface contacts (the 3' end of 23 S RNA and the 3' end of the 5 S RNA have been localized). Most interesting is a groove on the surface, which might accommodate the mRNA.     

On the coordination of La3+ by phosphatidylserine.

In a recent study by Bentz, J., D. Alford, J. Cohen, and N. Düzgünes (1988. Biophys. J. 53:593-607), La3+ was found to be more effective than Ca2+ in causing nonleaky fusion of phosphatidylserine vesicles. It was proposed that this difference in fusion efficiency may be due, in part, to a difference in coordination of the two cations. That is, Ca2+ was presumed to bind to the lipid phosphate, whereas La3+ was proposed to be coordinated by the serine carboxylate and amine. 31P and 13C NMR results presented here demonstrate that the lanthanides, Tb3+ and La3+, are coordinated by the phosphodiester and carboxylate moieties of phosphatidylserine. Tb3+-Phosphatidylserine optical experiments suggest that the serine amine does not coordinate the lanthanide below pH 10, at least not while the membrane has a net negative surface charge. Although these observations disagree with the structural details proposed by Bentz et al. (1988), they are not in conflict with their general fusion mechanism. The work presented here also demonstrates that La3+ affects the inner surface phosphodiesters differently than those on the outer surface of phosphatidylserine vesicles. The vesicles studied are of an intermediate size, having diameters on the order of 150-200 nm. The cation appears to have a more immediate effect on the packing of the crowded headgroups on the inner surface. Higher levels of bound La3+ on the outer surface may be required to induce the same changes in headgroup conformation.     

The turnover of milkweed pollinia on bumble bees,and implications for outcrossing

Summary Bumble bees (Bombus spp.) picked up a pollen packet (pollinium) of milkweed (Asclepias syriaca L.) every 2–5 h, usually more rapidly on their feet than on their mouthparts. Pollinia were retained an average of slightly over one day on the mouthparts and one-quarter day on the feet. This long retention period enhances the possibility of outcrossing in this largely or completely self-incompatible species. Although many more pollinia were carried on the feet, the longer retention of those on the mouthparts resulted in their collective outcrossing potential exceeding that of pollinia on the feet. Once pollinia became attached to the bees (via their attachment mechanisms, the corpuscula), others often attached to the translator arms (connecting corpusculum with pollinia) of the first pollinia. Long strings of pollinia and corpuscula often resulted, but they frequently were shed down to a single corpusculum, which was usually retained for long periods (estimated retention time=12–43 days). During the middle and latter part of the flowering period about two-thirds of the bees' feet carried only a single corpusculum. Feet in this condition picked up extremely few pollinia and thus were largely unavailable as sites for pollen transfer. Having several single corpuscula on the feet greatly lowered the number of pollinia carried by a bee over the season. Single corpuscula occurred much less frequently on the mouthparts and were shed over 25 times as rapidly as those on the feet. Many more bumble bees moved between clones than did other possible diurnal pollinators, largely a result of being several times more abundant than all other visitors combined. This factor, plus their heavy pollinia load, suggests that they were the most important diurnal pollinators of these clones.     

Interaction sites of the G protein beta subunit with brain G protein-coupled inward rectifier K+ channel

G protein-coupled inward rectifier K(+) channels (GIRK channels) are activated directly by the G protein betagamma subunit. The crystal structure of the G protein betagamma subunits reveals that the beta subunit consists of an N-terminal alpha helix followed by a symmetrical seven-bladed propeller structure. Each blade is made up of four antiparallel beta strands. The top surface of the propeller structure interacts with the Galpha subunit. The outer surface of the betagamma torus is largely made from outer beta strands of the propeller. We analyzed the interaction between the beta subunit and brain GIRK channels by mutating the outer surface of the betagamma torus. Mutants of the outer surface of the beta(1) subunit were generated by replacing the sequences at the outer beta strands of each blade with corresponding sequences of the yeast beta subunit, STE4. The mutant beta(1)gamma(2) subunits were expressed in and purified from Sf9 cells. They were applied to inside-out patches of cultured locus coeruleus neurons. The wild type beta(1)gamma(2) induced robust GIRK channel activity with an EC(50) of about 4 nm. Among the eight outer surface mutants tested, blade 1 and blade 2 mutants (D1 and CD2) were far less active than the wild type in stimulating GIRK channels. However, the ability of D1 and CD2 to regulate type I and type II adenylyl cyclases was not very different from that of the wild type beta(1)gamma(2). As to the activities to stimulate phospholipase Cbeta(2), D1 was more potent and CD2 was less potent than the wild type beta(1)gamma(2). Additionally we tested four beta(1) mutants in which mutated residues are located in the top Galpha/beta interacting surface. Among them, mutant W332A showed far less ability than the wild type to activate GIRK channels. These results suggest that the outer surface of blade 1 and blade 2 of the beta subunit might specifically interact with GIRK and that the beta subunit interacts with GIRK both over the outer surface and over the top Galpha interacting surface.     

Identification of free coated pinocytic vesicles in Swiss 3T3 cells.

Whether or not free coated vesicles are involved during internalization of ligands bound to the receptors of coated pits is controversial. Free coated vesicles cannot be identified with certainty in random individual thin sections - reconstructions based on consecutive thin sections are required. The thickness of the sections determines the reliability of such reconstructions. In the present study, serial section electron microscopy was applied to Swiss 3T3 cells and the topographical resolution yielded by 80 nm and 20 nm sections was compared. Swiss 3T3 cells in monolayer at 37 degrees C were exposed for 5 min to cationized ferritin (CF) which is a marker of pinocytic vesicles. Subsequently the cells were fixed, pelleted and further processed for electron microscopy. The results showed that reconstructions of coated CF-labeled structures based on consecutive sections of an average thickness of approximately 80 nm could not be performed with certainty. A substantial fraction (25%) of the examined profiles appeared to be free vesicles, but narrow surface connections could easily have been missed in these thick sections. The series of the much thinner 20 nm sections provided a better resolution allowing the narrowest surface connections to be identified. Accordingly, the number of truly free, coated vesicles was much lower than the number of apparently free vesicles in the thick sections. However, free coated vesicles labeled with CF were identified in the consecutive 20 nm sections (4% of the examined profiles).     

Three-dimensional reconstruction of mammalian 40 S ribosomal subunit

The small (40 S) subunit from rabbit reticulocyte ribosomes has been reconstructed from electron micrographs of a negatively stained single-particle specimen to a resolution of 3.85 nm. The reconstruction reveals a morphology consisting of a broad wedge-shaped head structure set atop a quasi-cylindrical body. Distinctive features recognized in two-dimensional projections, such as the beak, back lobes, and feet, can now be localized in three dimensions. By reference to a recent reconstruction of the monomeric 80 S ribosome we can identify the interface and exterior surfaces of the subunit, thus enabling more detailed functional interpretations.     

Asymmetric distribution of nitrate reductase subunits in the cytoplasmic membrane of Escherichia coli: evidence derived from surface labeling studies with transglutaminase.

The enzyme transglutaminase has been used to label surface proteins of Escherichia coli cytoplasmic membranes by covalently attaching to them a small fluorescent primary amine, dansyl cadaverine. Spheroplasts lacking outer membrane, osmotically lysed vesicles from the spheroplasts, and vesicles made by breaking cells in a French pressure cell were each labeled with transglutaminase and dansyl cadaverine. When the total cytoplasmic membrane proteins of each were examined on sodium dodecyl sulfate gels, three rather different labeling patterns were obtained. Labeling of the respiratory enzyme, nitrate reductase, in the membranes of each of these preparations was also examined. Membrane-bound nitrate reductase contains three subunits: A, B, and C. Dansyl cadaverine labeling of nitrate reductase in the presence of Triton X-100 indicated that subunits A and C could be labeled. When nitrate reductase was isolated from dansyl cadaverine-labeled spheroplasts, none of the subunits was labeled. When nitrate reductase was isolated from French press vesicles, subunit A was labeled and labeling was enhanced by the presence of nitrate during labeling. When nitrate reductase from osmotic vesicles was examined, subunit A was labeled in the presence of nitrate but no labeled subunits appeared when the vesicles were labeled in the absence of nitrate. It was concluded that (i) nitrate reductase is buried in the membrane with subunit A exposed only on the inner surface of the membrane, (ii) subunit C is sufficiently buried within the membrane so that it is inaccessible to transglutaminase, (iii) subunit B is not labeled under any condition, so its location is not known, and (iv) large osmotic vesicles are probably mosaics in which some protein components have been reoriented.     

Cell surface glycoproteins of CHO cells. II. Surface distribution and pathway of internalization

The surface distribution and pathway for internalization of the major cell surface proteins of Chinese hamster ovary (CHO) cells have been investigated after reacting cells at 4 degrees C with the membrane-impermeant reagent trinitrobenzenesulfonate. Molecules, haptenized with trinitrophenol groups, the majority of which are in a group of high molecular weight acidic glycoproteins (HMWAG), were labelled at 4 degrees C with anti-dinitrophenol immunoglobulins coupled to fluorescein isothiocyanate (FITC), horseradish peroxidase, or colloidal gold and either immediately fixed for mapping their distribution or followed intracellularly after warming to allow endocytosis to proceed. The distribution of label on the CHO cell surface was non-random with a large proportion arranged in clusters from 100 to 300 nm in diameter. Antibody label was concentrated heavily on microvilli, and about 10% of the molecules were always associated with clathrin-coated pits. Upon warming the cells to 37 degrees C, HMWAG were internalized immediately into smooth-membraned tubules (less than 80 nm luminal diameter) that appeared to connect with vesicles (less than 300 nm luminal diameter) located in the cortical cytoplasm. By 60 min, labelled antibody was located within larger vesicles (greater than 300 nm luminal diameter) that had a morphology characteristic of multivesicular bodies and not lysosomes. There was no evidence for entry of labelled molecules into either electron-dense, secondary lysosomes or into the Golgi cisternae, suggesting that neither compartment is involved in the major pathway of cell surface endocytosis. Our results are consistent with the view that the majority of plasma membrane protein are internalized as small discrete domains by a pathway very similar to that described by others for adsorptive endocytosis.     

A comparative study of the cutaneous microflora of normal feet with low and high levels of odour

A comparison of the cutaneous microflora found on normal feet with varying levels of odour has been made. High population densities of staphylococci and aerobic coryneform bacteria predispose to foot odour. There was no association between odour and the carriage on feet of any particular micro-organism, including brevi-bacteria. All organisms isolated were screened for exoenzyme activity. Only staphylococci produced lipase (78% of the staphylococci), whereas 97% of micrococci, 68% of aerobic coryneform bacteria, 25% of staphylococci and 94% of propionibacteria produced proteinase. The ability to degrade callous was exhibited by 47% of micrococci, 24% of aerobic coryneforms and 17% of the staphylococci. Feet with high odour had significantly higher population densities of micro-organisms with the ability to produce these exoenzymes than feet with low odour. No association was observed between foot odour and the carriage of micro-organisms capable of producing methanethiol. A hypothesis for the role of micro-organisms in the production of foot odour is proposed.     

Structure of an S layer on a pathogenic strain of Aeromonas hydrophila.

Negative staining revealed a tetragonal surface array (S layer) on all the members of a serogroup of Aeromonas hydrophila which possess high virulence for fish. The S layers were similar on all the strains examined, with unit cell dimensions of approximately 12 nm. A single representative strain, strain TF7, was selected for further analysis. Freeze-cleaved and etched preparations and sections for electron microscopy showed that the S layer was the outermost component of the cell envelope. This was confirmed by observation of thin sections. Computer-generated enhancements of the negatively stained micrographs showed the subunit organization to a resolution of less than 4 nm. Two structural units of identical lattice constants alternated in the array in both axes, and one of them was apparently dominant as the center of mass. The lesser unit was rotated 20 degrees from the dominant axes of symmetry and was formed by the junction of linker projections from a corner of the four components of the dominant unit. This interpretation was supported by finding that the array consists of a single polypeptide (molecular weight, 52,000). The unit cell as defined showed p4 symmetry, and a = b = 12.2 nm.     

Determination of the structure of lipid vesicle-bound angiotensin II and angiotensin I

A mass spectrometry (MS)-based strategy was developed to determine the structure of lipid vesicle-bound angiotensin II (AII) and angiotensin I (AI). It involves hydrogen-deuterium exchange (HDX), chemical modifications (e.g., nitration of tyrosine, acetylation of free amino group), and ladder sequencing. HDX is also combined with tandem mass spectrometry (MS/MS) to provide structural details at individual amino acid residues. It was observed that a major portion of both of these peptide hormones interacts with the phospholipid head groups on the surface of the vesicles and that Tyr residue is embedded in the vesicles. Both peptides have a U-shaped structure in the lipid environment.     

Structure of the Azotobacter vinelandii surface layer.

Electron microscopy of the Azotobacter vinelandii tetragonal surface array, negatively stained with ammonium molybdate in the presence of 1 mM calcium chloride, showed an apparent repeat frequency of 12 to 13 nm. Image processing showed dominant tetrad units alternating with low-contrast cruciform structures formed at the junction of slender linkers extending from corner macromolecules of four adjoining dominant units. The actual unit cell showed p4 symmetry, and a = b = 18.4 nm. Distilled water extraction of the surface array released a multimeric form of the single 60,000 molecular-weight protein (S protein) which constitutes the surface layer. The molecular weight of the multimer was estimated at 255,000 by gel filtration, indicating a tetrameric structure of four identical subunits and suggesting that this multimer was the morphological subunit of the S layer. Tetrameric S protein exhibited low intrinsic stability once released from the outer membrane, dissociating into monomers when incubated in a variety of buffers including those which served as the base for defined media used to cultivate A. vinelandii. The tetramer could not be stabilized in these buffers at any temperature between 4 and 30 degrees C, but the addition of 2 to 5 mM Ca2+ or Mg2+ completely prevented its dissociation into monomers. Circular dichroism measurements indicated that the secondary structure of the tetramer was dominated by aperiodic and beta-sheet conformations, and the addition of Ca2+ did not produce any gross changes in this structure. Only the tetrameric form of S protein was able to reassemble in vitro in the presence of divalent cations onto the surface of cells stripped of their native S layer.     

Differential activation of the plantar flexor muscles in balance control across different feet orientations on the ground

The ankle plantar flexor muscles act synergistically to control quiet and dynamic body balance. Previous research has shown that the medial (MG) and lateral (LG) gastrocnemii, and soleus (SOL) are differentially activated as a function of motor task requirements. In the present investigation, we evaluated modulation of the plantar flexors' activation from feet orientation on the ground in an upright stance and the ensuing reactive response to a perturbation. A single group of young participants (n = 24) was evaluated in a task requiring initial stabilization of body balance against a backward pulling load (5% or 10% of body weight) attached to their trunk, and then the balance was suddenly perturbed, releasing the load. Four feet orientations were compared: parallel (0°), outward orientation at 15° and 30°, and the preferred orientation (M = 10.5°). Results revealed a higher activation magnitude of SOL compared to MG-LG when sustaining quiet balance against the 10% load. In the generation of reactive responses, MG was characterized by earlier, steeper, and proportionally higher activation than LG-SOL. Feet orientation at 30° led to higher muscular activation than the other orientations, while the activation relationship across muscles was unaffected by feet orientation. Our results support the conclusion of task-specific differential modulation of the plantar flexor muscles for balance control.     

Topological analysis of the pyridine nucleotide transhydrogenase of Escherichia coli using proteolytic enzymes

The pyridine nucleotide transhydrogenase of Escherichia coli has an alpha 2 beta 2 structure (alpha: Mr, 54,000; beta: Mr, 48,700). Hydropathy analysis of the amino acid sequences suggested that the 10 kDa C-terminal portion of the alpha subunit and the N-terminal 20-25 kDa region of the beta subunit are composed of transmembranous alpha-helices. The topology of these subunits in the membrane was investigated using proteolytic enzymes. Trypsin digestion of everted cytoplasmic membrane vesicles released a 43 kDa polypeptide from the alpha subunit. The beta subunit was not susceptible to trypsin digestion. However, it was digested by proteinase K in everted vesicles. Both alpha and beta subunits were not attacked by trypsin and proteinase K in right-side out membrane vesicles. The beta subunit in the solubilized enzyme was only susceptible to digestion by trypsin if the substrates NADP(H) were present. NAD(H) did not affect digestion of the beta subunit. Digestion of the beta subunit of the membrane-bound enzyme by trypsin was not induced by NADP(H) unless the membranes had been previously stripped of extrinsic proteins by detergent. It is concluded that binding of NADP(H) induces a conformational change in the transhydrogenase. The location of the trypsin cleavage sites in the sequences of the alpha and beta subunits were determined by N- and C-terminal sequencing. A model is proposed in which the N-terminal 43 kDa region of the alpha subunit and the C-terminal 30 kDa region of the beta subunit are exposed on the cytoplasmic side of the inner membrane of E. coli. Binding sites for pyridine nucleotide coenzymes in these regions were suggested by affinity chromatography on NAD-agarose columns.