Genetics of cosQ, the DNA-packaging termination site of phage lambda: local suppressors and methylation effects

The cos site of the bacteriophage lambda chromosome contains the sites required for DNA processing and packaging during virion assembly. cos is composed of three subsites, cosQ, cosN, and cosB. cosQ is required for the termination of chromosome packaging. Previous studies have shown cosQ mutations to be suppressed in three ways: by a local suppressor within cosQ; by an increase in the length of the lambda chromosome; and by missense mutations affecting the prohead's portal protein, gpB. In the first study reported here, revertants of a set of cosQ mutants were screened for suppressors, and cis-acting suppressors of cosQ mutations were studied; these included second-site cosQ point mutations, base-pair insertions within cosQ, and an additional genome-lengthening suppressor. The 7-bp-long cosQ, with the sequence 5'-GGGTCCT-3', coincides exactly with the recognition site for the EcoO109I restriction/methylation system, which has the consensus sequence 5'-PuGGNCCPy-3'. In a second study, EcoO109I methylation was found to strongly interfere with the residual cosQ function of leaky cosQ mutants. cis-acting suppressors that overcome methylation-associated defects, including a methylation-dependent suppressor, were also isolated. Models of cosQ suppression are presented.     

Genetic Evidence That Recognition of Cosq, the Signal for Termination of Phage λ DNA Packaging, Depends on the Extent of Head Filling

Packaging a phage λ chromosome involves cutting the chromosome from a concatemer and translocating the DNA into a prohead. The cutting site, cos, consists of three subsites: cosN, the nicking site; cosB, a site required for packaging initiation; and cosQ, a site required for termination of packaging. cosB contains three binding sites (R sequences) for gpNu1, the small subunit of terminase. Because cosQ has sequence identity to the R sequences, it has been proposed that cosQ is also recognized by gpNu1. Suppressors of cosB mutations were unable to suppress a cosQ point mutation. Suppressors of a cosQ mutation (cosQ1) were isolated and found to be of three sorts, the first affecting a base pair in cosQ. The second type of cosQ suppression involved increasing the length of the phage chromosome to a length near to the maximum capacity of the head shell. A third class of suppressors were missense mutations in gene B, which encodes the portal protein of the virion. It is speculated that increasing DNA length and altering the portal protein may reduce the rate of translocation, thereby increasing the efficiency of recognition of the mutant cosQ. None of the cosQ suppressors was able to suppress cosB mutations. Because cosQ and cosB mutations are suppressed by very different types of suppressors, it is concluded that cosQ and the R sequences of cosB are recognized by different DNA-binding determinants.     

Defining cosQ, the site required for termination of bacteriophage lambda DNA packaging

Bacteriophage lambda is a double-stranded DNA virus that processes concatemeric DNA into virion chromosomes by cutting at specific recognition sites termed cos. A cos is composed of three subsites: cosN, the nicking site; cosB, required for packaging initiation; and cosQ, required for termination of chromosome packaging. During packaging termination, nicking of the bottom strand of cosN depends on cosQ, suggesting that cosQ is needed to deliver terminase to the bottom strand of cosN to carry out nicking. In the present work, saturation mutagenesis showed that a 7-bp segment comprises cosQ. A proposal that cosQ function requires an optimal sequence match between cosQ and cosNR, the right cosN half-site, was tested by constructing double cosQ mutants; the behavior of the double mutants was inconsistent with the proposal. Substitutions in the 17-bp region between cosQ and cosN resulted in no major defects in chromosome packaging. Insertional mutagenesis indicated that proper spacing between cosQ and cosN is required. The lethality of integral helical insertions eliminated a model in which DNA looping enables cosQ to deliver a gpA protomer for nicking at cosN. The 7 bp of cosQ coincide exactly with the recognition sequence for the Escherichia coli restriction endonuclease, EcoO109I.     

Analysis of capsid portal protein and terminase functional domains: interaction sites required for DNA packaging in bacteriophage T4.

Bacteriophage DNA packaging results from an ATP-driven translocation of concatemeric DNA into the prohead by the phage terminase complexed with the portal vertex dodecamer of the prohead. Functional domains of the bacteriophage T4 terminase and portal gene 20 product (gp20) were determined by mutant analysis and sequence localization within the structural genes. Interaction regions of the portal vertex and large terminase subunit (gp17) were determined by genetic (terminase-portal intergenic suppressor mutations), biochemical (column retention of gp17 and inhibition of in vitro DNA packaging by gp20 peptides), and immunological (co-immunoprecipitation of polymerized gp20 peptide and gp17) studies. The specificity of the interaction was tested by means of a phage T4 HOC (highly antigenicoutercapsid protein) display system in which wild-type, cs20, and scrambled portal peptide sequences were displayed on the HOC protein of phage T4. Binding affinities of these recombinant phages as determined by the retention of these phages by a His-tag immobilized gp17 column, and by co-immunoprecipitation with purified terminase supported the specific nature of the portal protein and terminase interaction sites. In further support of specificity, a gp20 peptide corresponding to a portion of the identified site inhibited packaging whereas the scrambled sequence peptide did not block DNA packaging in vitro.The portal interaction site is localized to 28 residues in the central portion of the linear sequence of gp20 (524 residues). As judged by two pairs of intergenic portal-terminase suppressor mutations, two separate regions of the terminase large subunit gp17 (central and COOH-terminal) interact through hydrophobic contacts at the portal site. Although the terminase apparently interacts with this gp20 portal peptide, polyclonal antibody against the portal peptide appears unable to access it in the native structure, suggesting intimate association of gp20 and gp17 possibly internalizes terminase regions within the portal in the packasome complex. Both similarities and differences are seen in comparison to analogous sites which have been identified in phages T3 and lambda.     

Genetic analysis of mutations affecting terminase, the bacteriophage lambda DNA packaging enzyme, that suppress mutations in cosB, the terminase binding site.

Terminase, the DNA packaging enzyme of phage lambda, binds to lambda DNA at a site called cosB, and introduces staggered nicks at an adjacent site, cosN, to generate the cohesive ends of virion lambda DNA molecules. Terminase also is involved in separation of the cohesive ends and in binding the prohead, the empty protein shell into which lambda DNA is packaged. Terminase is a DNA-dependent ATPase, and both subunits, gpNu1 and gpA, have ATPase activity. cosB contains a series of gpNu1 binding sites, R3, R2 and R1; between R3 and R2 is a binding site, I1, for integration host factor (IHF), the Escherichia coli DNA bending protein. In this work, a series of mutations in Nu1 have been isolated as suppressors of cosB mutations. One of the Nu1 mutations is identical to the previously described Nu1ms1/ohm1 mutation predicted to cause the change L40F in the 181 amino acid-long gpNu1. Three other Nu1 missense mutations, the Nu1ms2 (L40I), ms3 (Q97K) and ms4 (A92G) mutations, have been isolated; the relative strengths of suppression of cosB mutations by the Nu1ms mutations are: ms1 > ms2 > ms3 > ms4. The Nu1 missense mutations all affect amino acid residues that lie outside of the putative helix-turn-helix DNA binding motif of gpNu1. The Nu1ms1 and Nu1ms2 mutations alter an amino acid residue (L40) that lies directly between two segments of gpNu1 proposed to be involved in ATP binding and hydrolysis; thus these mutations are likely to alter the gpNu1 ATP-binding site. The Nu1ms3 and Nu1ms4 mutations both affect amino acid residues in the central region of gpNu1 that is predicted to form a hydrophilic alpha-helix. To explain how the Nu1ms mutations suppress cosB defects, models involving alterations of the DNA binding and/or catalytic properties of terminase are considered. The results also indicate that terminase occupancy of a single gpNu1 binding site (R3) is necessary and sufficient for the efficient initiation of DNA packaging; the Nu1ms1, ms2 and ms3 mutations permit IHF-independent plaque formation by a phage lacking R2 and R1.     

Nucleotide sequence of the operators of lambda ultravirulent mutants.

The nucleotide sequence of the operators of ultravirulent mutants of lambda, able to grow on host cells with elevated repressor levels, was determined. It appears that ultravirulence in lambda requires multiple mutational events at the operator sequences. OL1, OL2, and OL3 operator sites are the target of mutational changes in ultravirulent phages indicating that these sites participate in vivo in repression of the PL promoter. No changes were found in the OR3 sequence, in contrast there is a mutation in OR2 and two mutations in OR1, in both lambda 668 and lambda 2668 phages. This mutated operator structure accounts for the constitutive expression of their PR promoter either in cells overproducing the lambda repressor or in cells overproducing the cro gene product. A model of the structure of the lambda operator site is proposed. The nucleotide sequence in each site can be divided into two functionally different subsets, one of which is recognized by the repressor while the other stabilizes the repressor-operator interaction.     

Bacteriophage lambda DNA packaging: DNA site requirements for termination and processivity

Bacteriophage lambda chromosomes are processively packaged into preformed shells, using end-to-end multimers of intracellular viral DNA as the packaging substate. A 200 bp long DNA segment, cos, contains all the sequences needed for DNA packaging. The work reported here shows that efficient DNA packaging termination requires cos's I2 segment, in addition to the required termination subsite, cosQ, and the nicking site, cosN. Efficient processivity requires cosB, in addition to cosQ and cosN. An initiation-defective mutant form of cosB sponsored efficient processivity, indicating that the terminase-cosB interactions required for termination are less stringent than those required at initiation. The finding that an initiation-defective form of cosB is functional for processivity allows a re-interpretation of a similar finding, obtained previously, that the initiation-defective cosB of phage 21 is functional for processivity by the lambda packaging machinery. The cosBphi21 result can now be interpreted as indicating that interactions between cosBphi21 and lambda terminase, while insufficient for initiation, function for processivity.     

Mutations affecting antigenic determinants of an outer membrane protein of Escherichia coli.

The Escherichia coli LamB protein is located in the outer membrane. It is both a component of the maltose and maltodextrin transport system, and the receptor for phages lambda and K10. It is a trimer composed of three identical polypeptide chains, each containing 421 residues. Six independent mutants have been isolated, in which the LamB protein is altered in its interaction with one or more monoclonal antibodies specific for regions of the protein that are exposed at the cell surface. Some of the mutations also altered the binding site for phage lambda. All of the mutations were clustered in the same region of the lamB gene, corresponding to residues 333-394 in the polypeptide. This and previous results strongly suggest that a rather large segment of the LamB polypeptide, extending from residue 315 to 401, is exposed at the outer face of the outer membrane. This segment would bear the epitopes for the four available anti-LamB monoclonal antibodies that react with the cell surface, and part of the binding site for phage lambda.     

Effects of recB21, recF143, and uvrD152 on recombination in lambda bacteriophage-prophage and Hfr by F- crosses.

The effects of the mutation pairs recB21 recF143 and recB21 uvrD152 on the frequency of genetic recombination were investigated in lambda phage-prophage crosses under homoimmune conditions. To prevent recombinants from being formed by the phage red system, these experiments were performed with phages and prophages carrying red and gam mutations. Both spontaneous and damage-induced recombination was measured, the phages being either undamaged or treated with trimethylpsoralen and 360-nm light to cross-link the phage DNA. Control and damaged phages were allowed to infect lysogenic host cells under conditions in which phage gene expression was repressed and phage DNA replication was blocked by lambda immunity. Although the double mutations recB21 recF143 and recB21 uvrD152 reduced recombination in Hfr by F- crosses to 0.3 to 0.02% of the wild-type controls, the presence of these pairs of mutations in the host lysogens had relatively little effect on the results of the phage-prophage crosses. In the latter system, recB21 recF143 reduced spontaneous and damaged-induced recombination by less than threefold whereas recB21 uvrD152 increased it to three times the wild-type level, the increase being attributable to the uvrD mutation. Evidently, the gene products of recB,C uvrD, and recF wee not needed for lambda phage-prophage recombination under repressed conditions.     

Mutations in Nu1, the gene encoding the small subunit of bacteriophage lambda terminase, suppress the postcleavage DNA packaging defect of cosB mutations.

The linear double-stranded DNA molecules in lambda virions are generated by nicking of concatemeric intracellular DNA by terminase, the lambda DNA packaging enzyme. Staggered nicks are introduced at cosN to generate the cohesive ends of virion DNA. After nicking, the cohesive ends are separated by terminase; terminase bound to the left end of the DNA to be packaged then binds the empty protein shell, i.e., the prohead, and translocation of DNA into the prohead occurs. cosB, a site adjacent to cosN, is a terminase binding site. cosB facilitates the rate and fidelity of the cosN cleavage reaction by serving as an anchoring point for gpNu1, the small subunit of terminase. cosB is also crucial for the formation of a stable terminase-DNA complex, called complex I, formed after cosN cleavage. The role of complex I is to bind the prohead. Mutations in cosB affect both cosB functions, causing mild defects in cosN cleavage and severe packaging defects. The lethal cosB R3- R2- R1- mutation contains a transition mutation in each of the three gpNu1 binding sites of cosB. Pseudorevertants of lambda cosB R3- R2- R1- DNA contain suppressor mutations affecting gpNu1. Results of experiments that show that two such suppressors, Nu1ms1 and Nu1ms3, do not suppress the mild cosN cleavage defect caused by the cosB R3- R2- R1- mutation but strongly suppress the DNA packaging defect are presented. It is proposed that the suppressing terminases, unlike the wild-type enzyme, are able to assemble a stable complex I with cosB R3- R2- R1- DNA. Observations on the adenosine triphosphatase activities and protease susceptibilities of gpNu1 of the Nu1ms1 and Nu1ms3 terminases indicate that the conformation of gpNu1 is altered in the suppressing terminases.     

Cloning, mutation, and location of the F origin of conjugal transfer.

pED806 , a pBR322 derivative carrying the origin of transfer ( oriT ) of F, was rapidly lost from cells carrying an F tra+ plasmid. Instability was increased in a RecA- host, and depended in particular upon the Ftra YZ genes that produce the nick at oriT at which transfer is initiated. Instability was also correlated with the orientation of the oriT fragment in the vector plasmid. Mutants of pED806 selected as being stable in the presence of Flac proved to carry cis-dominant oriT mutations. The oriT site was subcloned from pED806 on a HaeII fragment including a HaeII-Bg/II segment of F DNA approximately 385 base pair (bp) long into the 2.25 kilobase (kb) vector plasmid pED825 , giving pED822 . pED822 was fully proficient for oriT function, and recircularised in recipient cells by a recA- and tra-independent oriT -specific ligation/recombination event. ' Phasmids ' constructed by cloning pED806 or an oriT - mutant into a lambda vector were used to confirm that the nick site in lambda oriT phages grown in the presence of Flac tra+ is indeed at oriT . The nick site in a further lambda oriT phage (ED lambda 102) was then located 140 +/- 20 bp from the Bg/II site forming one terminus of the F fragment cloned in pED806 and pED822 .     

Isolation and characterization of Escherichia coli dnaA amber mutants.

Specialized transducing phage lambda (formula, see text) dnaA-2 was mutagenized, and two derivatives designated lambda (formula) dnaA17(Am) and lambda (formula) dnaA452(Am) were obtained. They did not transduce such mutations as dnaA46, dnaA167, and dnaA5 when an amber suppressor was absent, but they did so in the presence of an amber suppressor. By contrast, they transduced the dna-806 and tna-2 mutations in the absence of an active amber suppressor. The dna-806 and tna-2 mutations are known to be located very close to the dnaA gene, but in separate cistrons. When ultraviolet light-irradiated uvrB cells were infected with the derivative phages and proteins specified by them were analyzed by gel electrophoresis, a 50,000-dalton protein was found to be specifically missing if an amber suppressor was absent. This protein was synthesized when an amber suppressor was present. The dnaA17(Am) mutation on the transducing phage genome was then transferred by genetic recombination onto the chromosome of an Escherichia coli strain carrying a temperature-sensitive amber suppressor supF6(Ts), yielding a strain which was temperature sensitive for growth and deoxyribonucleic acid replication. The temperature-sensitive trait was suppressed by supD, supE, or supF. We conclude that, most likely, the derivative phages acquired amber mutations in the dnaA gene whose product is a 50,000-dalton protein as identified by gel electrophoretic analysis.     

Isolation of different bacteriophages using the LamB protein for adsorption on Escherichia coli K-12.

Ten phages which use the LamB protein for adsorption have been isolated from sewage waters. Nine have a shape similar to lambda and require only the LamB protein for adsorption. One has a shape similar to T phages and can use either the LamB or the OmpC protein. Preliminary characterization by a number of criteria showed that at least nine of these phages were different and also differed from other known phages which use the LamB protein, such as lambda, 21, and K10.