Challenges and opportunities in the purification of recombinant tagged proteins

The purification of recombinant proteins by affinity chromatography is one of the most efficient strategies due to the high recovery yields and purity achieved. However, this is dependent on the availability of specific affinity adsorbents for each particular target protein. The diversity of proteins to be purified augments the complexity and number of specific affinity adsorbents needed, and therefore generic platforms for the purification of recombinant proteins are appealing strategies. This justifies why genetically encoded affinity tags became so popular for recombinant protein purification, as these systems only require specific ligands for the capture of the fusion protein through a pre-defined affinity tag tail. There is a wide range of available affinity pairs “tag-ligand” combining biological or structural affinity ligands with the respective binding tags. This review gives a general overview of the well-established “tag-ligand” systems available for fusion protein purification and also explores current unconventional strategies under development.     

Rapid purification and crystal structure analysis of a small protein carrying two terminal affinity tags

Small peptide tags are often fused to proteins to allow their affinity purification in high-throughput structure analysis schemes. To assess the compatibility of small peptide tags with protein crystallization and to examine if the tags alter the three-dimensional structure, the N-terminus of the chicken alpha-spectrin SH3 domain was labeled with a His6 tag and the C-terminus with a StrepII tag. The resulting protein, His6-SH3-StrepII, consists of 83 amino-acid residues, 23 of which originate from the tags. His6-SH3-StrepII is readily purified by dual affinity chromatography, has very similar biophysical characteristics as the untagged protein domain and crystallizes readily from a number of sparse-matrix screen conditions. The crystal structure analysis at 2.3 A resolution proves native-like structure of His6-SH3-StrepII and shows the entire His6 tag and part of the StrepII tag to be disordered in the crystal. Obviously, the fused affinity tags did not interfere with crystallization and structure analysis and did not change the protein structure. From the extreme case of His6-SH3-StrepII, where affinity tags represent 27% of the total fusion protein mass, we extrapolate that protein constructs with N- and C-terminal peptide tags may lend themselves to biophysical and structural investigations in high-throughput regimes.     

The high throughput purification of Fc-fusion proteins

Screening protein molecules for a particular biological activity sometimes requires the purification of hundreds of proteins. Often many constructs, from several 100 to a 1000, are screened before the lead candidate is found. What is needed is a rapid and reliable way to purify these proteins. Here we describe the simultaneous purification of 10 fusion proteins utilizing a novel instrument, the BioOptix 10.     

Mars - robust automatic backbone assignment of proteins

MARS a program for robust automatic backbone assignment of (13)C/(15)N labeled proteins is presented. MARS does not require tight thresholds for establishing sequential connectivity or detailed adjustment of these thresholds and it can work with a wide variety of NMR experiments. Using only (13)C(alpha)/(13)C(beta) connectivity information, MARS allows automatic, error-free assignment of 96% of the 370-residue maltose-binding protein. MARS can successfully be used when data are missing for a substantial portion of residues or for proteins with very high chemical shift degeneracy such as partially or fully unfolded proteins. Other sources of information, such as residue specific information or known assignments from a homologues protein, can be included into the assignment process. MARS exports its result in SPARKY format. This allows visual validation and integration of automated and manual assignment.     

One-step purification of recombinant proteins with the 6xHis tag and Ni-NTA resin

The 6xHis/Ni-NTA system allows rapid and efficient affinity purification of recombinant proteins from virtually any expression system. Protocols and tips for purification under both native and denaturing conditions are provided, as well as a rapid spin procedure for protein minipreps.     

Automated solid-phase synthesis of high capacity oligo-dT cellulose for affinity purification of poly-A tagged biomolecules

Affinity purification of poly-adenylated biomolecules using solid supports that are derivatized with poly-thymidine oligonucleotides provides a powerful method for isolating cellular mRNA. These systems have also been used to purify mRNA–peptide fusions generated by RNA-display. However, the commercial source for high capacity oligo-dT cellulose was recently discontinued. To overcome this problem, we have developed a low cost solid-phase synthesis protocol to generate oligo-dT cellulose. Comparative binding studies indicate that chemically synthesized oligo-dT cellulose functions with superior loading capacity when compared to the discontinued product. We suggest that this method could be used to synthesize oligo-dT resin for routine purification of poly-adenylated biomolecules.     

Automated prediction of ligand-binding sites in proteins

We present a method, termed AutoLigand, for the prediction of ligand-binding sites in proteins of known structure. The method searches the space surrounding the protein and finds the contiguous envelope with the specified volume of atoms, which has the largest possible interaction energy with the protein. It uses a full atomic representation, with atom types for carbon, hydrogen, oxygen, nitrogen and sulfur (and others, if desired), and is designed to minimize the need for artificial geometry. Testing on a set of 187 diverse protein-ligand complexes has shown that the method is successful in predicting the location and approximate volume of the binding site in 73% of cases. Additional testing was performed on a set of 96 protein-ligand complexes with crystallographic structures of apo and holo forms, and AutoLigand was able to predict the binding site in 80% of the apo structures.     

Review of conformation-specific affinity purification methods for plasma vitamin K-dependent proteins

There are seven known vitamin K-dependent proteins in blood. These proteins require calcium ion for expressing their full biological activities. Calcium ion also induces conformational changes in this class of proteins. Taking advantage of the ligand induced conformational changes, a number of unique approaches of affinity chromatography have been developed. These methodologies have been very useful tools for both the purification and for understanding the structure–function relationships of this class of proteins. One method is the use of metal ion dependent immunoaffinity chromatography. The antigen can be dissociated from the antibodies with either the removal or addition of calcium ion under physiological conditions. The other method is pseudoaffinity chromatography. This method uses conventional ion-exchange or hydrophobic resin and manipulates the mobilities of the proteins on these resins by the presence or absence of calcium ions. Researchers working with other calcium binding proteins or other proteins that are known to undergo ligand induced conformational changes may benefit from the experience of these unique conformation-specific affinity chromatography approaches.     

One‐step selective affinity purification and immobilization of His‐tagged enzyme by recyclable magnetic nanoparticles

The NiFe₂O₄ magnetic nanoparticles (NF‐MNPs) were prepared for one‐step selective affinity purification and immobilization of His‐tagged recombinant glucose dehydrogenase (GluDH). The prepared nanoparticles were characterized by a Fourier‐transform infrared spectrophotometer and microscopy. The immobilization and purification of His‐tagged GluDH on NF‐MNPs were investigated. The optimal immobilization conditions were obtained that mixed cell lysis and carriers in a ratio of 0.13 in pH 8.0 Tris‐HCl buffer at 30℃ and incubated for 2 h. The highest activity recovery and protein bindings were 71.39% and 38.50 μg mg^–1 support, respectively. The immobilized GluDH exhibited high thermostability, pH‐stability and it can retain more than 65% of the initial enzyme after 10 cycles for the conversion of glucose to gluconolactone. Comparing with a commercial Ni‐NTA resin, the NF‐MNPs displayed a higher specific affinity with His‐tagged recombinant GluDH.     

Automated search of natively folded protein fragments for high-throughput structure determination in structural genomics

Structural genomic projects envision almost routine protein structure determinations, which are currently imaginable only for small proteins with molecular weights below 25,000 Da. For larger proteins, structural insight can be obtained by breaking them into small segments of amino acid sequences that can fold into native structures, even when isolated from the rest of the protein. Such segments are autonomously folding units (AFU) and have sizes suitable for fast structural analyses. Here, we propose to expand an intuitive procedure often employed for identifying biologically important domains to an automatic method for detecting putative folded protein fragments. The procedure is based on the recognition that large proteins can be regarded as a combination of independent domains conserved among diverse organisms. We thus have developed a program that reorganizes the output of BLAST searches and detects regions with a large number of similar sequences. To automate the detection process, it is reduced to a simple geometrical problem of recognizing rectangular shaped elevations in a graph that plots the number of similar sequences at each residue of a query sequence. We used our program to quantitatively corroborate the premise that segments with conserved sequences correspond to domains that fold into native structures. We applied our program to a test data set composed of 99 amino acid sequences containing 150 segments with structures listed in the Protein Data Bank, and thus known to fold into native structures. Overall, the fragments identified by our program have an almost 50% probability of forming a native structure, and comparable results are observed with sequences containing domain linkers classified in SCOP. Furthermore, we verified that our program identifies AFU in libraries from various organisms, and we found a significant number of AFU candidates for structural analysis, covering an estimated 5 to 20% of the genomic databases. Altogether, these results argue that methods based on sequence similarity can be useful for dissecting large proteins into small autonomously folding domains, and such methods may provide an efficient support to structural genomics projects.     

Automated backbone assignment of labeled proteins using the threshold accepting algorithm

The sequential assignment of backbone resonances is the first step in the structure determination of proteins by heteronuclear NMR. For larger proteins, an assignment strategy based on proton side-chain information is no longer suitable for the use in an automated procedure. Our program PASTA (Protein ASsignment by Threshold Accepting) is therefore designed to partially or fully automate the sequential assignment of proteins, based on the analysis of NMR backbone resonances plus C information. In order to overcome the problems caused by peak overlap and missing signals in an automated assignment process, PASTA uses threshold accepting, a combinatorial optimization strategy, which is superior to simulated annealing due to generally faster convergence and better solutions. The reliability of this algorithm is shown by reproducing the complete sequential backbone assignment of several proteins from published NMR data. The robustness of the algorithm against misassigned signals, noise, spectral overlap and missing peaks is shown by repeating the assignment with reduced sequential information and increased chemical shift tolerances. The performance of the program on real data is finally demonstrated with automatically picked peak lists of human nonpancreatic synovial phospholipase A₂, a protein with 124 residues.     

His tag effect on solubility of human proteins produced in Escherichia coli: a comparison between four expression vectors

We have compared four different vectors for expression of proteins with N- or C-terminal hexahistidine (His6) tags in Escherichia coli by testing these on 20 human proteins. We looked at a total recombinant protein production levels per gram dry cell weight, solubility of the target proteins, and yield of soluble and total protein when purified by immobilized metal ion affinity purification. It was found that, in general, both N- and C-terminal His6 tags have a noticeable negative affect on protein solubility, but the effect is target protein specific. A solubilizing fusion tag was able to partly counteract this negative effect. Most target proteins could be purified under denaturing conditions and about half of the proteins could be purified under physiological conditions. The highest protein production levels and yield of purified protein were obtained from a construct with C-terminal His tag. We also observe a large variation in cell growth rate, which we determined to be partly caused by the expression vectors and partly by the targets. This variation was found to be independent of the production level, solubility and tertiary structure content of the target proteins.     

Identification of the ligand binding sites on the molecular surface of proteins

Identification of protein biochemical functions based on their three-dimensional structures is now required in the post-genome-sequencing era. Ligand binding is one of the major biochemical functions of proteins, and thus the identification of ligands and their binding sites is the starting point for the function identification. Previously we reported our first trial on structure-based function prediction, based on the similarity searches of molecular surfaces against the functional site database. Here we describe the extension of our first trial by expanding the search database to whole heteroatom binding sites appearing within the Protein Data Bank (PDB) with the new analysis protocol. In addition, we have determined the similarity threshold line, by using 10 structure pairs with solved free and complex structures. Finally, we extensively applied our method to newly determined hypothetical proteins, including some without annotations, and evaluated the performance of our methods.     

Comparative analysis and "expression space" coverage of the production of prokaryotic membrane proteins for structural genomics

Membrane proteins comprise up to one-third of prokaryotic and eukaryotic genomes, but only a very small number of membrane protein structures are known. Membrane proteins are challenging targets for structural biology, primarily due to the difficulty in producing and purifying milligram quantities of these proteins. We are evaluating different methods to produce and purify large numbers of prokaryotic membrane proteins for subsequent structural and functional analysis. Here, we present the comparative expression data for 37 target proteins, all of them secondary transporters, from the mesophilic organism Salmonella typhimurium and the two hyperthermophilic organisms Aquifex aeolicus and Pyrococcus furiosus in three different Escherichia coli expression vectors. In addition, we study the use of Lactococcus lactis as a host for integral membrane protein expression. Overall, 78% of the targets were successfully produced under at least one set of conditions. Analysis of these results allows us to assess the role of different variables in increasing "expression space" coverage for our set of targets. This analysis implies that to maximize the number of nonhomologous targets that are expressed, orthologous targets should be chosen and tested in two vectors with different types of promoters, using C-terminal tags. In addition, E. coli is shown to be a robust host for the expression of prokaryotic transporters, and is superior to L. lactis. These results therefore suggest appropriate strategies for high-throughput heterologous overproduction of membrane proteins.     

Affinity purification of histidine-tagged proteins

Expression of recombinant proteins is a standard technique in molecular biology and a wide variety of prokaryotic as well as eukaryotic expression systems are currently in use. A limiting step is often the purification of the expressed recombinant protein, particularly if mammalian expression systems that yield low expression levels are employed. Here, we discuss the advantages and restrictions of tagging recombinant proteins with histidines and purifying them by Ni²⁺-NTA chromatography.Abbreviations GST glutathione S-transferase - NTA nitrilotriacetic acid - His histidine - PAGE polyacrylamide gel electrophoresis     

Crystal structures of fusion proteins with large-affinity tags

The fusion of a protein of interest to a large-affinity tag, such as the maltose-binding protein (MBP), thioredoxin (TRX), or glutathione-S-transferase (GST), can be advantageous in terms of increased expression, enhanced solubility, protection from proteolysis, improved folding, and protein purification via affinity chromatography. Unfortunately, crystal growth is hindered by the conformational heterogeneity induced by the fusion tag, requiring that the tag is removed by a potentially problematic cleavage step. The first three crystal structures of fusion proteins with large-affinity tags have been reported recently. All three structures used a novel strategy to rigidly fuse the protein of interest to MBP via a short three- to five-amino acid spacer. This strategy has the potential to aid structure determination of proteins that present particular experimental challenges and are not conducive to more conventional crystallization strategies (e.g., membrane proteins). Structural genomics initiatives may also benefit from this approach as a way to crystallize problematic proteins of significant interest.     

Strategies in the purification of plant proteins

This review focuses on some recent developments in the purification of plant proteins. Topics discussed include chromatographic procedures using immobilized antibodies, protein subunits and metal ions. The use of affinity labeling to facilitate purification is presented along with recent uses of detergents. Some of the methodology has had limited application in plant biochemistry, and where appropriate, the authors have presented examples of results with non-plant systems.     

Rapid screening for improved solubility of small human proteins produced as fusion proteins in Escherichia coli

A prerequisite for structural genomics and related projects is to standardize the process of gene overexpression and protein solubility screening to enable automation for higher throughput. We have tested a methodology to rapidly subclone a large number of human genes and screen these for expression and protein solubility in Escherichia coli. The methodology, which can be partly automated, was used to compare the effect of six different N-terminal fusion proteins and an N-terminal 6*His tag. As a realistic test set we selected 32 potentially interesting human proteins with unknown structures and sizes suitable for NMR studies. The genes were transferred from cDNA to expression vectors using subcloning by recombination. The subcloning yield was 100% for 27 (of 32) genes for which a PCR fragment of correct size could be obtained. Of these, 26 genes (96%) could be overexpressed at detectable levels and 23 (85%) are detected in the soluble fraction with at least one fusion tag. We find large differences in the effects of fusion protein or tag on expression and solubility. In short, four of seven fusions perform very well, and much better than the 6*His tag, but individual differences motivate the inclusion of several fusions in expression and solubility screening. We also conclude that our methodology and expression vectors can be used for screening of genes for structural studies, and that it should be possible to obtain a large fraction of all NMR-sized and nonmembrane human proteins as soluble fusion proteins in E. coli.     

Aqueous two-phase extraction and purification of animal proteins

Aqueous two-phase systems provide a rapid, easily scalable method for separation of soluble proteins from insoluble materials and other undesired proteins. The method can be operated in continuous mode. It is particularly useful for animal proteins, as it overcomes difficulties of other methods in removing bulk insoluble material, while at the same time providing purification with respect to total soluble protein. This article describes the development of methods for aqueous two-phase extraction and purification of animal proteins, at both laboratory and pilot scale. The strengths, weaknesses, and possible future prospects for the method are discussed.