Conformational behavior of oxygenated mycobacterial mycolic acids from Mycobacterium bovis BCG

Phase diagrams of Langmuir monolayers of oxygenated mycolic acids, i.e. methoxy mycolic acid (MeO-MA), ketomycolic acid (Keto-MA), and artificially obtained deoxo-mycolic acid (deoxo-MA) from Mycobacterium bovis BCG were obtained by thermodynamic analysis of the surface pressure (pi) vs. average molecular area (A) isotherms. At lower temperatures and lower surface pressures, both Keto- and MeO-MAs formed rigid condensed monolayers where each MA molecule was considered to be in a 4-chain form, in which the three carbon chain segments due to bending of the 3-hydroxy aliphatic carboxylate chain and the 2-side chain were in compact parallel arrangement. At higher temperatures and surface pressures, MeO-MA and deoxo-MA tended to take stretched-out conformations in which the 3-hydroxy aliphatic carboxylate chain was more or less in an extended form, but Keto-MA retained the original 4-chain structure. The thickness measurement of the monolayers in situ by ellipsometry at different pi values and temperatures supported the above conclusions derived from the phase diagrams. The enthalpy changes associated with the phase transitions of MeO-MA and deoxo-MA implied that the MeO-MA needed larger energy to change from a compact conformation to an extended one, possibly and partly due to the dehydration of the methoxy group from water surface involved. Molecular dynamics studies of MA models derived from Monte Carlo calculations were also performed, which confirmed the conformational behavior of MAs suggested by the thermodynamic studies on the Langmuir monolayers.     

Temperature dependence of the Langmuir monolayer packing of mycolic acids from Mycobacterium tuberculosis

Phase diagrams of the Langmuir monolayer of dicyclopropyl alpha mycolic acid (α-MA), cyclopropyl methoxy mycolic acid (MeO-MA), and cyclopropyl ketomycolic acids (Keto-MA) from Mycobacterium tuberculosis were obtained by thermodynamic analysis of the surface pressure (π) vs. average molecular area (A) isotherms at temperatures in the range of 10-46 °C. The Langmuir monolayers of MAs were shown to exhibit various phases depending on the temperature (T) and the π values. In the Langmuir monolayer of Keto-MA, the carbonyl group in the meromycolate chain apparently touches the water surface to give the molecule a W-shape in all the temperatures and surface pressures studied. Keto-MA formed a rigid solid condensed film, with four hydrocarbon chains packing together, not observed in the others. In contrast, the monolayer films of α-and MeO-MAs having no such highly hydrophilic intra-chain groups in the meromycolate chain were mostly in liquid condensed phase. This novel insight into the packing of mycolic acids opens up new avenues for the study of the role of mycolic acids in the mycobacterial cell envelopes and pathogenic processes.     

Temperature dependence of the Langmuir monolayer packing of mycolic acids from Mycobacterium tuberculosis

Phase diagrams of the Langmuir monolayer of dicyclopropyl alpha mycolic acid (alpha-MA), cyclopropyl methoxy mycolic acid (MeO-MA), and cyclopropyl ketomycolic acids (Keto-MA) from Mycobacterium tuberculosis were obtained by thermodynamic analysis of the surface pressure (pi) vs. average molecular area (A) isotherms at temperatures in the range of 10-46 degrees C. The Langmuir monolayers of MAs were shown to exhibit various phases depending on the temperature (T) and the pi values. In the Langmuir monolayer of Keto-MA, the carbonyl group in the meromycolate chain apparently touches the water surface to give the molecule a W-shape in all the temperatures and surface pressures studied. Keto-MA formed a rigid solid condensed film, with four hydrocarbon chains packing together, not observed in the others. In contrast, the monolayer films of alpha-and MeO-MAs having no such highly hydrophilic intra-chain groups in the meromycolate chain were mostly in liquid condensed phase. This novel insight into the packing of mycolic acids opens up new avenues for the study of the role of mycolic acids in the mycobacterial cell envelopes and pathogenic processes.     

Roles of α-methyl trans-cyclopropane groups in behavior of mixed mycolic acid monolayers

Mixed Langmuir films of type 1 alpha-(α-) and keto-mycolic acids (MAs) were investigated to understand the roles of α-methyl trans-cyclopropane containing keto-MA in determining the physical and chemical properties of the monolayers. Surface pressure (π) vs. mean molecular area (A) isotherms were measured at constant mole fractions defined as the ratio of the keto-MA molarity to the total molarity of α-MA and keto-MA (X_keto) at 25?°C and 37?°C. A and the elastic modulus (E) of the mixed monolayer were compared for different X_keto at fixed π values. In keto-MA rich monolayers, A values were much larger than values of the combined areas of α-MA and keto-MA, while the E values were close to those of solid keto-MA monolayers. A and E were also plotted against the mole fraction of α-methyl trans-cyclopropane containing keto-MA, which showed that the α-methyl trans-cyclopropane group stabilized the W-form conformation of mycolic acids in monolayers, and rendered them solid state. Furthermore, a comparison of the experimental results and the α-methyl trans-cyclopropane content in cell-wall MAs from various strains indicated that the ratio of trans-cyclopropane content was important in determining the nature of the mixed MA layer.     

The formation and Langmuir-Blodgett deposition of monolayers of novel photochromic azobenzene-containing phospholipid molecules

A group of novel phospholipid molecules has been synthesised, in which one or both acyl chains has been replaced with an azobenzene-containing acid. These lipids photochromic, isomerising from the trans form in which the azobenzene unit is almost linear to a cis form with a bent chain. The influence of this isomerisation on the properties of monolayers of these lipids on an aqueous subphase has been investigated using the Langmuir trough. The lipids are shown to form compact monolayers when in the trans form, but to have greater molecular areas after isomerisation. All lipids could be transferred to a glass substrate by Langmuir-Blodgett deposition. Evidence suggestive of phase equilibria is seen for surface monolayers of one of the lipids, which also shows evidence of a temperature-dependent phase transition by light scattering when dispersed as vesicles in water. Marked hysteresis is seen between cycles of compression and expansion for surface monolayers of azo-lipids before and after photoisomerisation.     

Miscibility and phase behavior of DPPG and perfluorocarboxylic acids at the air-water interface

The miscibility and phase behavior of two components of phospholipids and perfluorocarboxylic acids [FCn; perfluorododecanoic acid (FC12), perfluorotetradecanoic acid (FC14), perfluorohexadecanoic acid (FC16), and perfluorooctadecanoic acid (FC18)] have been systematically investigated using Langmuir monolayer technique. Dipalmitoylphosphatidylglycerol (DPPG) is utilized as a phospholipid component in biomembranes. Surface pressure (π)-molecular area (A) and surface potential (ΔV)-A isotherms have been measured for the DPPG/FCn systems on 0.15 M NaCl (pH 2.0) at 298.2 K. From the isotherm results, two-dimensional phase diagrams are constructed and classified into miscible and immiscible patterns. Furthermore, the phase behavior of the DPPG/FCn systems has been morphologically examined using fluorescence microscopy (FM) and atomic force microscopy (AFM). These images indicate different phases among the four systems. In particular, specific phase morphology is observed in the middle molar fraction range for the DPPG/FC14 system; FC14 is selectively excluded from mixed DPPG-FC14 monolayers to be concentrated in the phase boundary as surface pressure increases. Then DPPG is refined as a patched film. Moreover, the data obtained here are compared to those in the previous systems in which different kinds of phospholipids were treated. Through a series of the miscibility investigations, it is proposed that combinations of hydrophobic chain lengths and of polar headgroups contribute to the monolayer miscibility between phospholipids and perfluorocarboxylic acids.     

Characterization of mycolic acids from the pathogen Rhodococcus equi by tandem mass spectrometry with electrospray ionization

We describe a simple tandem mass spectrometric approach toward structural characterization of mycolic acids, the long-chain α-alkyl-β-hydroxy fatty acids unique to mycobacteria and related taxa. On collisionally activated dissociation in a linear ion trap or tandem quadrupole mass spectrometer, the [M−H]⁻ ions of mycolic acid generated by electrospray ionization undergo dissociation to eliminate the meroaldehyde residue, leading to formation of carboxylate anions containing α-alkyl chains. The structural information from these fragment ions affords structural assignment of the mycolic acids, including the lengths of the meromycolate chain and the α-branch. This study revealed that the mycolic acids isolated from pathogenic Rhodococcus equi 103 contained a series of homologous ions having C₃₀ to C₅₀ chain with 0–2 double bonds. The α-branch ranged from C₁₀ to C₁₈ with 0 to 1 double bond, in which 16:0 and 14:0 are the most prominent, whereas the meromycolate chain ranged from C₁₄ to C₃₄ with 0 to 2 double bonds. The major molecular species consisted of more than 3 isomers that differ by the lengths of the α-branch or meromycolate chain, and up to 10 isobaric isomers were identified for some minor ions. We also employed tandem quadrupole mass spectrometry with precursor ion and neutral loss scans for profiling mycolic acid with specific structure in mixtures. The tandem spectra obtained from precursor ion scans of m/z 255 (16:0-carboxylate anion) and m/z 227 (14:0-carboxylate anion) may provide a simple specific means for classification of Rhodococci species, whereas tandem spectra from neutral loss of meroaldehyde residue scans provided a simple approach to reveal the mycolic acid molecules with specific meromycolate chain in mixtures.     

Structure–function relationships of the antigenicity of mycolic acids in tuberculosis patients

Cell wall mycolic acids (MA) from Mycobacterium tuberculosis (M.tb) are CD1b presented antigens that can be used to detect antibodies as surrogate markers of active TB, even in HIV coinfected patients. The use of the complex mixtures of natural MA is complicated by an apparent antibody cross-reactivity with cholesterol. Here firstly we report three recombinant monoclonal scFv antibody fragments in the chicken germ-line antibody repertoire, which demonstrate the possibilities for cross-reactivity: the first recognized both cholesterol and mycolic acids, the second mycolic acids but not cholesterol, and the third cholesterol but not mycolic acids. Secondly, MA structure is experimentally interrogated to try to understand the cross-reactivity. Unique synthetic mycolic acids representative of the three main functional classes show varying antigenicity against human TB patient sera, depending on the functional groups present and on their stereochemistry. Oxygenated (methoxy- and keto-) mycolic acid was found to be more antigenic than alpha-mycolic acids. Synthetic methoxy-mycolic acids were the most antigenic, one containing a trans-cyclopropane apparently being somewhat more antigenic than the natural mixture. Trans-cyclopropane-containing keto- and hydroxy-mycolic acids were also found to be the most antigenic among each of these classes. However, none of the individual synthetic mycolic acids significantly and reproducibly distinguished the pooled serum of TB positive patients from that of TB negative patients better than the natural mixture of MA. This argues against the potential to improve the specificity of serodiagnosis of TB with a defined single synthetic mycolic acid antigen from this set, although sensitivity may be facilitated by using a synthetic methoxy-mycolic acid.     

Cholesterol affects spectrin-phospholipid interactions in a manner different from changes resulting from alterations in membrane fluidity due to fatty acyl chain composition

We previously showed that erythrocyte and brain spectrins bind phospholipid vesicles and monolayers prepared from phosphatidylethanolamine and phosphatidylserine and their mixtures with phosphatidylcholine (Review: A.F. Sikorski, B. Hanus-Lorenz, A. Jezierski, A. R. Dluzewski, Interaction of membrane skeletal proteins with membrane lipid domain, Acta Biochim. Polon. 47 (2000) 565). Here, we show how changes in the fluidity of the phospholipid monolayer affect spectrin-phospholipid interaction. The presence of up to 10%-20% cholesterol in the PE/PC monolayer facilitates the penetration of the monolayer by both types of spectrin. For monolayers constructed from mixtures of PI/PC and cholesterol, the effect of spectrins was characterised by the presence of two maxima (at 5 and 30% cholesterol) of surface pressure for erythroid spectrin, and a single maximum (at 20% cholesterol) for brain spectrin. The binding assay results indicated a small but easily detectable decrease in the affinity of erythrocyte spectrin for FAT-liposomes prepared from a PE/PC mixture containing cholesterol, and a 2- to 5-fold increase in maximal binding capacity (B_max) depending on the cholesterol content. On the other hand, the results from experiments with a monolayer constructed from homogenous synthetic phospholipids indicated an increase in Δπ change with the increase in the fatty acyl chain length of the phospholipids used to prepare the monolayer. This was confirmed by the results of a pelleting experiment. Adding spectrins into the subphase of raft-like monolayers constructed from DOPC, SM and cholesterol (1/1/1) induced an increase in surface pressure. The Δπ change values were, however, much smaller than those observed in the case of a natural PE/PC (6/4) monolayer. An increased binding capacity for spectrins of liposomes prepared from a “raft-like” mixture of lipids could also be concluded from the pelleting assay. In conclusion, we suggest that the effect of membrane lipid fluidity on spectrin-phospholipid interactions is not simple but depends on how it is regulated, i.e., by cholesterol content or by the chemical structure of the membrane lipids.     

Mixed monolayers of fatty acids with distearoylglycerophosphocholine

Mixed monolayer states of long normal-chain fatty acids with distearoylglycerophosphocholine (DSPC) have been studied by a previously described thermodynamic treatment. The surface pressures of mixed monolayers of tetradecanoic, pentadecanoic and octadecanoic acids with DSPC were measured at various compositions and temperatures. The two-dimensional phase diagrams of both the tetradecanoic acid-DSPC and pentadecanoic acid-DSPC systems were determined. They both exhibited eutectic type phase diagrams. In the octadecanoic acid-DSPC system the two components were immiscible both in the liquid-expanded and liquid-condensed states. The apparent molar entropy and energy changes for the tetradecanoic acid-DSPC system were calculated. The values for tetradecanoic acid were negative, as is the usual case. However, the values of DSPC were positive, and their absolute values wer about $\text{1}\text{4}$ of that of tetradecanoic acid.     

Self assembly of poly(o-methoxy aniline) with RNA and RNA/DNA hybrids: Physical properties and conformational change of poly(o-methoxy aniline)

Biomolecular hybrids of a conducting polymer [poly(o-methoxy aniline) (POMA)] and RNA are prepared at the three different compositions by mixing aqueous solutions of diethyl, 2-hydroxy ethyl, ammonium salt of RNA (type IX from Torula Yeast) and POMA (ES, emeraldine salt; doping level [Cl]/[N] = 0.52). A slow increase of pH up to 30 h of aging occurs in the mixture till it levels up. The TEM micrographs indicate a fibrillar network structure in all the hybrid compositions (POMA: RNA = 1:3, 1:1, 3:1, by weight). In the complexes three types of supramolecular interactions, viz. (i) electrostatic, (ii) H-bonding and (iii) π–π interactions, are evident from the FTIR spectroscopy. The CD spectra indicate a small distortion of A-RNA conformation towards its B form during the hybrid formation. Time and temperature dependent UV–vis spectral studies indicate a slow red shift of the π-band to polaron band transition peak (λ_max) for the uncoiling of the POMA (P) chain on the RNA (R) surface. The repulsive interaction between the radical cations of POMA (ES) absorbed on the RNA surface is attributed to the conformational change causing the uncoiling of POMA chain. UV–vis spectral study indicates that the uncoiling and attachment of POMA on RNA surface is much faster than that on DNA (D). In POMA–RNA–DNA (PRD) hybrid solutions slower red shift of λ_max indicates more disordered array of the phosphate groups than that in PR and PD systems. The conductivity values of the PR hybrids (10^− 6 S/cm^− 1) are three orders higher than that of RNA, rendering the PR hybrids to be useful for fabricating good biosensors. In the PRD hybrids conductivity decreases by two orders than those of PR and PD hybrids suggesting a disorder arrangement of POMA chains in the PRD hybrids. The I–V characteristic curves of the PR and PRD hybrids indicate a semiconducting nature of the hybrids.     

Oxidized phospholipids as potential molecular targets for antimicrobial peptides

The effects of oxidatively modified phospholipids on the association with model biomembranes of four antimicrobial peptides (AMPs), temporin B and L, indolicidin, and LL-37(F27W) were studied by Langmuir balance and fluorescence spectroscopy. In keeping with previous reports the negatively charged phospholipid phosphatidylglycerol (PG) enhanced the intercalation of all four peptides into lipid monolayers and liposomal bilayers under low ionic strength conditions. Interestingly, similar effect was observed for 1-palmitoyl-2-(9′-oxo-nonanoyl)-sn-glycero-3-phosphocholine (PoxnoPC), a zwitterionic oxidized phospholipid bearing an aldehyde function at the end of its truncated sn-2 acyl chain. Instead, the structurally similar 1-palmitoyl-2-azelaoyl-sn-glycero-3-phosphocholine (PazePC) containing a carboxylic moiety was less efficient in promoting the membrane association of these peptides. Physiological saline reduced the binding of the above peptides to membranes containing PG, whereas interactions with PoxnoPC were found to be insensitive to ionic strength. Notably, membrane intercalation of temporin L, the most surface active of the above peptides could be into PoxnoPC containing monolayers was strongly attenuated by methoxyamine, suggesting the importance of Schiff base formation between peptide amino groups and the lipid aldehyde function. PoxnoPC and similar aldehyde bearing oxidatively modified phospholipids could represent novel molecular targets for AMPs.     

Interactions of Alkylphosphocholines with Model Membranes—The Langmuir Monolayer Study

Alkylphosphocholines (APCs) belong to a class of synthetic antitumor lipids, which are new-generation anticancer agents. In contrast to traditional antitumor drugs, they do not attack the cell nucleus but, rather, the cellular membrane; however, their mechanism of action is not fully understood. This work compared the interactions of selected APCs [namely, hexadecylphosphocholine (miltefosine), octadecylphosphocholine and erucylphosphocholine] with the most important membrane lipids [cholesterol, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)] and examined their influence on a model membrane of tumor and normal cells. As a simple model of membranes, Langmuir monolayers prepared by mixing cholesterol either with a saturated phosphatidylcholine (DPPC), for a normal cell membrane, or with an unsaturated one (POPC), for a tumor cell membrane, have been applied. The APC–lipid interactions, based on experimental surface pressure (π) versus mean molecular area (A) isotherms, were analyzed qualitatively (with mean molecular area values) as well as quantitatively (with the ΔG ^exc function). Strong attractive interactions were observed for mixtures of APCs with cholesterol, contrary to the investigated phosphatidylcholines, for which the interactions were found to be weak with a tendency to separation of film components. In ternary monolayers it has been found that the investigated model systems (cholesterol/DPPC/APC vs cholesterol/POPC/APC) differ significantly as regards the interactions between film-forming molecules. The results demonstrate stronger interactions between the components of cholesterol/POPC/APC monolayers compared to cholesterol/POPC film, mimicking tumor cell membranes. In contrast, the interactions in cholesterol/DPPC/APC films were found to be weaker than those in the cholesterol/DPPC system, serving as a model of healthy cell membranes, thus proving that the incorporation of APCs is, from a thermodynamic point of view, unfavorable for binary cholesterol/DPPC monolayers. It can be concluded that the composition of healthy cell membranes is a natural barrier preventing the incorporation of APCs into normal cells.     

Molecular associations and surface-active properties of short- and long-N-acyl chain ceramides

The behaviour of N-hexadecanoylsphingosine (Cer16), N-hexanoylsphingosine (Cer6) and N-acetylsphingosine (Cer2) in aqueous media and in lipid-water systems, monolayers and bilayers has been comparatively examined using Langmuir balance and fluorescence techniques. Cer16 behaves as an insoluble non-swelling amphiphile, not partitioning into the air-water interface, thus not modifying the surface pressure of the aqueous solutions into which it is included. By contrast both Cer6 and Cer2 behave as soluble amphiphiles, up to approx. 100 μM. At low concentrations, they become oriented at the air-water interface, increasing surface pressure in a dose-dependent way up to ca. 5 μM bulk concentration. At higher concentrations, the excess ceramide forms micelles, critical micellar concentrations of both Cer6 and Cer2 being in the 5-6 μM range. When the air-water interface is occupied by a phospholipid, 6Cer2 and Cer6 become inserted in the phospholipid monolayer, causing a further increase in surface pressure. This increase is dose dependent, and reaches a plateau at ca. 2 μM ceramide bulk concentration. Both Cer2 and Cer6 become inserted in phospholipid monolayers with initial surface pressures of up to 43 and 46 mN m⁻¹, respectively, which ensures their capacity to become inserted into cell membranes whose monolayers are estimated to support a surface pressure of about 30 mN m⁻¹. Both Cer2 and Cer6, but not Cer16, had detergent-like properties, such as giving rise to phospholipid-ceramide mixed micelles, when added to phospholipid monolayers or bilayers. The short-chain ceramides form large aggregates and precipitate at concentrations above approx. 100 μM. These results are relevant in cell physiology studies in which short- and long-chain ceramides are sometimes used as equivalent molecules, in spite of their different biophysical behaviour.     

Guanidino groups greatly enhance the action of antimicrobial peptidomimetics against bacterial cytoplasmic membranes

Antimicrobial peptides or their synthetic mimics are a promising class of potential new antibiotics. Herein we assess the effect of the type of cationic side chain (i.e., guanidino vs. amino groups) on the membrane perturbing mechanism of antimicrobial α-peptide–β-peptoid chimeras. Langmuir monolayers composed of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylglycerol (DPPG) were used to model cytoplasmic membranes of both Gram-positive and Gram-negative bacteria, while lipopolysaccharide Kdo2-lipid A monolayers were mimicking the outer membrane of Gram-negative species. We report the results of the measurements using an array of techniques, including high-resolution synchrotron surface X-ray scattering, epifluorescence microscopy, and in vitro antimicrobial activity to study the molecular mechanisms of peptidomimetic interaction with bacterial membranes. We found guanidino group-containing chimeras to exhibit greater disruptive activity on DPPG monolayers than the amino group-containing analogues. However, this effect was not observed for lipopolysaccharide monolayers where the difference was negligible. Furthermore, the addition of the nitrobenzoxadiazole fluorophore did not reduce the insertion activity of these antimicrobials into both model membrane systems examined, which may be useful for future cellular localization studies.     

O-Mycoloylated Proteins from Corynebacterium: AN UNPRECEDENTED POST-TRANSLATIONAL MODIFICATION IN BACTERIA*

O-Acylation of proteins was known only in a few eukaryotic proteins but never in bacteria. We demonstrate, using a combination of protein chemistry and mass spectrometry, the occurrence of three O-acylated polypeptides in Corynebacterium glutamicum, PorA, PorH, and an unknown small protein. The three polypeptides are O-substituted by mycolic acids, long chain α-alkyl and β-hydroxy fatty acids specifically produced by members of the Corynebacterineae suborder. To date these acids were described only as esterifying trehalose and arabinogalactan, and less frequently glycerol, important components of the highly impermeable outer barrier of Corynebacterineae. We show that the post-translational mycoloylation of PorA occurs at Ser-15 and is necessary for the pore-forming activity of C. glutamicum.     

Adhesive and conformational behaviour of mycolic acid monolayers

We have studied the pH-dependent interaction between mycolic acid (MA) monolayers and hydrophobic and hydrophilic surfaces using molecular (colloidal probe) force spectroscopy. In both cases, hydrophobic and hydrophilic monolayers (prepared by Langmuir-Blodgett and Langmuir-Schaefer deposition on silicon or hydrophobized silicon substrates, respectively) were studied. The force spectroscopy data, fitted with classical DLVO (Derjaguin, Landau, Verwey, and Overbeek) theory to examine the contribution of electrostatic and van der Waals forces, revealed that electrostatic forces are the dominant contribution to the repulsive force between the approaching colloidal probe and MA monolayers. The good agreement between data and the DLVO model suggest that beyond a few nm away from the surface, hydrophobic, hydration, and specific chemical bonding are unlikely to contribute to any significant extent to the interaction energy between the probe and the surface. The pH-dependent conformation of MA molecules in the monolayer at the solid-liquid interface was studied by ellipsometry, neutron reflectometry, and with a quartz crystal microbalance. Monolayers prepared by the Langmuir-Blodgett method demonstrated a distinct pH-responsive behaviour, while monolayers prepared by the Langmuir-Schaefer method were less sensitive to pH variation. It was found that the attachment of water molecules plays a vital role in determining the conformation of the MA monolayers.     

Purified myelin lipids display a critical mixing point at low surface pressure

Lipids extracted from Purified Myelin Membranes (LPMM) were spread as monomolecular films at the air/aqueous interface. The films were visualized by Brewster Angle Microscopy (BAM) at different lateral pressures (π) and ionic environments. Coexistence of Liquid-Expanded (LE) and cholesterol-enriched (CE) rounded domains persisted up to π ≈ 5 mN/m but the monolayers became homogeneous at higher surface pressures. Before mixing, the domains distorted to non-rounded domains. We experimentally measured the line tension (λ) for the lipid monolayers at the domain borders by a shape relaxation technique using non-homogeneous electric fields. Regardless of the subphase conditions, the obtained line tensions are of the order of pN and tended to decrease as lateral pressure increased toward the mixing point. From the mean square displacement of nested trapped domains, we also calculated the dipole density difference between phases (μ). A non-linear drop was detected in this parameter as the mixing point is approached. Here we quantitively evaluated the π-dependance of both parameters with proper power laws in the vicinity of the critical mixing surface pressure, and the exponents showed to be consistent with a critical phenomenon in the two-dimensional Ising universality class. This idea of bidimensionality was found to be compatible only for simplified lipidic systems, while for whole myelin monolayers, that means including proteins, no critical mixing point was detected.Finally, the line tension values were related with the thickness differences between phases (Δt) near the critical point.     

Phospholipid Monolayers Probed by Vibrational Sum Frequency Spectroscopy: Instability of Unsaturated Phospholipids

The surface specific technique vibrational sum frequency spectroscopy has been applied to in situ studies of the degradation of Langmuir monolayers of 1,2-diacyl-phosphocholines with various degrees of unsaturation in the aliphatic chains. To monitor the degradation of the phospholipids, the time-dependent change of the monolayer area at constant surface pressure and the sum frequency intensity of the vinyl CH stretch at the carbon-carbon double bonds were measured. The data show a rapid degradation of monolayers of phospholipids carrying unsaturated aliphatic chains compared to the stable lipids carrying fully saturated chains when exposed to the ambient laboratory air. In addition, the degradation of the phospholipids can be inhibited by purging the ambient air with nitrogen. This instability may be attributed to spontaneous degradation by oxidation mediated by various reactive species in the air. To further elucidate the process of lipid oxidation in biological membranes artificial Langmuir monolayers probed by a surface specific spectroscopic technique as in this study can serve as a model system for studying the degradation/oxidation of cell membrane constituents.     

The Mycobacterium tuberculosis FAS-II dehydratases and methyltransferases define the specificity of the mycolic acid elongation complexes

Background

The human pathogen Mycobacterium tuberculosis (Mtb) has the originality of possessing a multifunctional mega-enzyme FAS-I (Fatty Acid Synthase-I), together with a multi-protein FAS-II system, to carry out the biosynthesis of common and of specific long chain fatty acids: the mycolic acids (MA). MA are the main constituents of the external mycomembrane that represents a tight permeability barrier involved in the pathogenicity of Mtb. The MA biosynthesis pathway is essential and contains targets for efficient antibiotics. We have demonstrated previously that proteins of FAS-II interact specifically to form specialized and interconnected complexes. This finding suggested that the organization of FAS-II resemble to the architecture of multifunctional mega-enzyme like the mammalian mFAS-I, which is devoted to the fatty acid biosynthesis.

Principal Findings

Based on conventional and reliable studies using yeast-two hybrid, yeast-three-hybrid and in vitro Co-immunoprecipitation, we completed here the analysis of the composition and architecture of the interactome between the known components of the Mtb FAS-II complexes. We showed that the recently identified dehydratases HadAB and HadBC are part of the FAS-II elongation complexes and may represent a specific link between the core of FAS-II and the condensing enzymes of the system. By testing four additional methyltransferases involved in the biosynthesis of mycolic acids, we demonstrated that they display specific interactions with each type of complexes suggesting their coordinated action during MA elongation.

Significance

These results provide a global update of the architecture and organization of a FAS-II system. The FAS-II system of Mtb is organized in specialized interconnected complexes and the specificity of each elongation complex is given by preferential interactions between condensing enzymes and dehydratase heterodimers. This study will probably allow defining essential and specific interactions that correspond to promising targets for Mtb FAS-II inhibitors.