Synthesis, X-ray structure and redox properties of the macrobicyclic iron(II) N2- and S2-containing vic-dioximates

Nucleophilic substitution of the reactive chlorine atoms of the boron-capped macrobicyclic vic-di- and hexahalogen-containing iron(II) precursors with 1,2-ethanedithiol and 1,2-benzenedithiol in dichloromethane as a solvent in the presence of triethylamine as a strong organic base afforded the corresponding di- and hexasulfide mono- and triribbed-functionalized clathrochelates, respectively, in relatively high yields. In the case of the low-reactive tin-capped clathrochelate [Fe(Cl₂Gm)₃(SnCl₃)₂]²⁻ dianion this reaction was performed in DMF with the potassium salt of 1,2-benzenedithiol. The reaction of the dichlorine-containing FeBd₂(Cl₂Gm)(BF)₂ precursor with an excess of ethylenediamine in DMF led to the clathrochelate with N₂-containing vic-dioximate ribbed fragment. The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV-vis, ¹H and ¹³C{¹H} NMR, ⁵⁷Fe Mössbauer spectroscopies, and X-ray crystallography.The nature and number of the ribbed substituents affect the geometry of a clathrochelate framework, first of all, the distortion of the trigonal prismatic-trigonal antiprismatic iron(II) coordination polyhedra, whereas the apical substituents at the capping boron atoms influe on the B-O distances in the apical RBO₃ fragments. The geometry of the tin-capped hexasulfide clathrochelate complex was deduced from EXAFS data using the scattering both on the encapsulated iron(II) and capping tin(IV) ions.The electrochemical properties of the iron(II) complexes obtained were studied by cyclic voltammetry. The electrochemically generated unstable reduced anionic forms are destabilized by the electron-donating ribbed substituents, whereas the oxidation led to the formation of the cationic macrobicycles, the stability of which depends on the nature of the apical capping groups and ribbed substituents as well. The pseudo-aromatic disulfide ribbed fragments stabilize the oxidized forms of the clathrochelate complexes.     

Mono- and trichloride clathrochelate iron (II) chloroglyoximates and their functionalization: The effect of the substituents in the clathrochelate framework on the reactivity of the chlorine-containing fragments in nucleophilic substitution reactions

The direct template macrocyclization of the three chloroglyoxime molecules with boron-containing Lewis acids on the iron (II) ion matrix led to the formation of a mixture of fac- and mer-isomers of clathrochelate complexes in the 1:3 ratio, which is equal to a statistical one. The yields of tris-chloroglyoximate precursors (25-40%) were practically the same as those for their earlier-studied chloromethylglyoximate analogs, whereas the reactivity of the former complex has proved to be markedly higher than that of the latter clathrochelates: the triamine clathrochelates were the major products in the reaction of (mer + fac)-Fe(ClHGm)₃(BC₆H₅)₂ and (mer + fac)-Fe(ClHGm)₃(BF)₂ complexes with n-butylamine, whereas for (mer + fac)-Fe(ClCH₃Gm)₃(BC₆H₅)₂ clathrochelate an analogs reaction produced the diamine complex only. The mixture of the diamine clathrochelate isomers was obtained in both cases with less reactive cyclohexylamine. The reaction of the trichloride precursors with alkyl- and arylthiols in the presence of triethylamine has proceeded more readily and led to the formation of trisulfide clathrochelates.The monochloride FeBd₂(ClHGm)(BF)₂ complex, obtained by the condensation of the macrocyclic bis-dioximate [FeBd₂(BF₂)₂ (CH₃CN)₂] with chloroglyoxime, readily underwent the nucleophilic substitution of the reactive chlorine atom with amines and thiol-containing functionalizing agents. The clathrochelate complexes with pendant substituents, containing reactive terminal HO-, H₂N- and HS-groups, were obtained. Thiolate FeBd₂(H(HSCH₂CH₂S)Gm)(BF)₂ clathrochelate underwent the intramolecular elimination of ethylene sulfide in basic media to yield the clathrochelate with attached HS-group. Clathrochelates obtained have been characterized using elemental analysis, PD and MALDI-TOF mass, IR, UV-Vis, ⁵⁷Fe Mössbauer and ¹H, ¹³C and ¹¹B NMR spectroscopies, and X-ray crystallography (for the fac-Fe(ClHGm)₃(BC₆H₅)₂ and FeBd₂{H(CH₃S)Gm}(BF)₂ · 2C₆H₆ complexes). X-ray structure of a fac-isomer of clathrochelate complex was solved for the first time in this study. Configurations intermediate between trigonal prismatic and trigonal antiprismatic have been deduced for the low-spin iron (II) ion coordination polyhedra of all clathrochelates obtained using ⁵⁷Fe Mössbauer parameters.     

Study of anti-fibrillogenic activity of iron(II) clathrochelates

The macrocyclic compounds mono- and bis-iron(II) clathrochelates were firstly studied as potential anti-fibrillogenic agents using fluorescent inhibitory assay, atomic force microscopy and flow cytometry. It is shown that presence of the clathrochelates leads to the change in kinetics of insulin fibrillization reaction and reduces the amount of formed fibrils (up to 70%). The nature of ribbed substituent could determine the activity of clathrochelates—the higher inhibitory effect is observed for compounds containing carboxybenzenesulfide groups, while the inhibitory properties only slightly depend on the size of complex species. The mono- and bis-clathrochelate derivatives of meta-mercaptobenzoic acid have close values of IC₅₀ namely 16 ± 2 and 24 ± 5 μM, respectively. The presence of clathrochelates decreases the fibril diameter from 5-12 nm for free insulin fibrils to 3–8 nm for these formed in the clathrochelate presence, it also prevents the lateral aggregation of mature fibrils and formation of superfibrillar clusters. However the addition of clathrochelate results in more heterogeneous (both by size and structure) insulin aggregates population as compared to the free insulin. This way, cage complexes—iron(II) clathrochelates are proposed as efficient agents able to suppress the protein aggregation processes.     

Synthesis, structure and electron-mediator properties of the mono- and difunctionalized macrobicyclic iron(II) tris-dioximates with thiol terminated ribbed spacer substituents

Nucleophilic substitution of the reactive chlorine atoms of mono- and dichlorine clathrochelate FeBd₂(HGmCl)(BF)₂ and FeBd₂(Cl₂Gm)(BF)₂ precursors (where Bd²⁻, HGmCl²⁻ and Cl₂Gm²⁻ are α-benzyldioxime, chloroglyoxime and dichloroglyoxine dianions, respectively) with HSCH₂CH₂SH and (HSCH₂CH₂)₂S in the presence of triethylamine afforded the FeBd₂(HGmSCH₂CH₂SH)(BF)₂ (1) and FeBd₂(HGm(SCH₂CH₂)₂SH)(BF)₂ clathrochelates with a sole thiol terminated spacer substituent and the FeBd₂((HS(CH₂CH₂S)₂)₂Gm)(BF)₂ clathrochelate with two longchain thiol-sulfide ribbed groups. The crystal and molecular structures of these complexes were obtained by X-ray crystallography. The clathrochelate molecules possess a geometry intermediate between a trigonal prism (TP) and a trigonal antiprism (TAP). The X-ray data are in a good agreement with the ⁵⁷Fe Mössbauer parameters for complexes studied. These parameters characterize them as the low-spin iron(II) complexes (the isomeric shift values) with TP-TAP geometry (the quadrupole splitting values). Application of clathrochelate self-assembled monolayer (SAM) as the redox mediators for the determination of hydrogen peroxide is discussed. The calibration curve for hydrogen peroxide concentrations was found to be in the range from 2.0 · 10⁻⁶ to 1.6 · 10⁻⁵ mol · L⁻¹ with limit of detection equal to 1.0 · 10⁻⁶ mol · L⁻¹. The clathrochelate SAM on gold electrode provides precise and sensitive amperometric determination of hydrogen peroxide.     

Synthesis, structural and electrochemical features of alicyclic and aromatic α,α′-N2- and-S2-dioximate macrobicyclic cobalt(II,III) and ruthenium(II) tris-complexes

The triribbed-functionalized cobalt(II,III) and ruthenium(II) clathrochelate derivatives of the vic-dioximes with two nitrogen or sulfur atoms in α-positions to π-conjugated diazomethine chelate fragments of a macrobicyclic framework were obtained in moderate yields under mild and high dilution conditions by nucleophilic substitution of six reactive chlorine atoms of the boron-capped macrobicyclic cobalt and ruthenium(II) precursors with N₂- and S₂-dinucleophiles (ethylenediamine and the corresponding α-dithiols in the presence of triethylamine, respectively). The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV-Vis, ¹H and ¹³C{¹H} NMR and EPR spectroscopies, magnetochemistry and X-ray crystallography. The MN₆-coordination polyhedra of all the X-ray studied clathrochelates possess a slightly distorted trigonal prismatic geometry. The encapsulated cobalt(II) ions are shifted from the centers of the cavities formed by the macrobicyclic ligand due to the Jahn-Teller distortion, while the ruthenium and iron(II) ions in their clathrochelate analogs do occupy these centers. The main geometrical parameters of the macrobicyclic frameworks vary with Shannon radius of an encapsulated metal ion. In the case of the tris-ethylenediamine cobalt(III) clathrochelate, the field strength of the macrobicyclic amine ligand is essentially lower than those for their aromatic and aliphatic analogs because of the negative σ_para-effect of the ribbed alkylamine substituents. The magnetometry and EPR data confirmed the low-spin character of the cobalt(II) complexes synthesized. The electrochemically generated oxidized cobalt clathrochelates are stable in the CVA time scale, whereas their ruthenium- and iron-containing analogs as well as the reduced forms of all the cobalt, ruthenium and iron complexes obtained are unstable.     

Synthesis and structure of monoribbed-functionalized disulfide iron(II) clathrochelates and their coordination as the ligands toward platinum(II) and platinum(IV) ions

Disulfide monoribbed-functionalized clathrochelates (i.e., fuctionalization of one of the three α-dioximate fragments) with ribbed thioalkyl, S₃-thioalkyl and hydroxythioalkyl substituents have been synthesized starting from the FeBd₂(Cl₂Gm)(BF)₂ precursor (where Bd²⁻ and Cl₂Gm²⁻ are α-benzyldioxime and dichloroglyoxime dianions) using the corresponding thiol/triethylamine system in dichloromethane solution. Clathrochelate S₆-dithiol in basic media underwent the intramolecular dealkylation to yield the S₃-thiocrown etheric clathrochelate. Clathrochelates obtained have been studied as the ligands toward Pt²⁺ and Pt⁴⁺ ions. The S-demethylation reaction of the methylsulfide complex with [PtCl₄]²⁻ dianion produced the polynuclear complexes of the dianionic clathrochelate dithiolate ligand. The reaction of n-butylsulfide clathrochelate with the trans-Pt^IVCl₄(C₆H₅CH₂CN)₂ afforded the binuclear compound with the disulfide iron(II) clathrochelate as a monodentate ligand. The obtained macrobicycles, their clathrochelate derivatives, and polynuclear complexes have been characterized using elemental analysis, MALDI-TOF and PD mass, IR, UV-Vis, and NMR spectra, and X-ray crystallography. The encapsulated iron(II) ion coordination polyhedra distortion angle φ values and the main distances in the molecules of polynuclear complexes have been deduced (obtained) using ⁵⁷Fe Mössbauer parameters and EXAFS data, respectively.     

Synthesis and spectroscopic and X-ray structural characterisation of some para-substituted triaryltin(pentacarbonyl)manganese(I) complexes

A series of para-substituted triaryltin(pentacarbonyl)manganese(I) compounds [(p-XC₆H₄)₃SnMn(CO)₅: II, X=CH₃; III, X=CH₃O; IV, X=CH₃S; V, X=F; VI, X=Cl; VII, X=CH₃S(O₂)] is reported for comparison with the known phenyl analogue I. IR data [ν(CO)] as well as complete ¹¹⁹Sn/⁵⁵Mn/¹³C solution NMR results are given for I-VII. Chemical shifts, ¹¹⁹Sn versus ⁵⁵Mn, except I, correlate well, but have differing single parameter (SP) correlations, ¹¹⁹Sn versus σ_I and ⁵⁵Mn versus σ°_p. These results are compared with previous SP studies of the ¹¹⁹Sn solution NMR spectra of the series, (p-XC₆H₄)₄Sn and (p-XC₆H₄)₃SnY (Y=Cl, Br, I). Full crystal structures are reported for compounds II-VI. All are similar to that of I, with the Mn(CO)₅ moiety being a distorted tetragonal pyramid, and having a quasi-mirror plane through the central C₄MnSnC₃ skeleton. The Ar₃Sn are distorted trigonal propellers with ring torsion angles in the range 30-80°, the exception being IV with one torsion angle of 22°.     

Template synthesis and structure of mono- and trisubstituted ribbed-functionalized iron(II) clathrochelates

The template condensation of three methylchloroglyoximate molecules with phenylboronic acid and with BF₃ · O(C₂H₅)₂ on an iron(II) ion afforded reactive trichloride phenylboron- and fluoroboron-capped precursors, respectively. The monochloride FeBd₂(CH₃ClGm)(BF)₂ precursor (where Bd²⁻ and CH₃ClGm²⁻ are α-benzyldioxime and methylchloroglyoxime dianions) was synthesized by condensation of macrocyclic iron(II) α-benzyldioximate FeBd₂(BF₂)₂(CH₃CN)₂ with CH₃ClGmH₂. Mono- and trifunctionalized amine, alkylsulfide, and arylsulfide clathrochelate iron(II) tris-dioximates were prepared starting from these precursors by nucleophilic substitution reactions. The complexes obtained were characterized using elemental analysis, PD mass, IR, UV-Vis, ¹H, ¹³C NMR, and ⁵⁷Fe Mössbauer spectra, and X-ray crystallography. An encapsulated low-spin iron(II) ion was found to have distorted trigonal-prismatic coordination N₆-environment in all clathrochelates synthesized.     

Template synthesis, structure and spectra of the semiclathrochelate and clathrochelate 1,4-pentadienylboron-capped iron(II) oximehydrazonates

The direct template condensation of diacetylmonooxime hydrazone with the 1,4-pentadienylboronates as Lewis acids on an iron(II) ion matrix led to the 1,4-pentadienylboron-capped semiclathrochelate iron(II) oximehydrazonates. The H⁺-ion-catalyzed macrocyclization of these precursors with an excess of triethyl orthoformate resulted in macrobicyclic complexes with a single apical 1,4-pentadienyl substituent. The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV-Vis, ¹H, ¹¹B{¹H} and ¹³C{¹H} NMR, ⁵⁷Fe Mössbauer spectroscopies, and X-ray crystallography. The X-ray diffraction and NMR data for complexes obtained showed the syn,syn,syn-orientation of all ethoxy substituents in 1,3,5-triazacyclohexane capping fragment in relation to a clathrochelate framework.     

Preparation and structural organisation of heteroleptic tetraphenylantimony(V) complexes comprising unidentately and bidentately coordinated O,O′-dialkyldithiophosphate groups: Multinuclear (C, P) CP/MAS NMR and single-crystal X-ray diffraction studies

O,O′-dipropyldithiophosphate and O,O′-di-iso-butyldithiophosphate (Dtph) tetraphenylantimony(V) complexes of the general formula [Sb(C₆H₅)₄{S₂P(OR)₂}] (R = C₃H₇, i-C₄H₉) were prepared and studied by means of ¹³C, ³¹P CP/MAS NMR spectroscopy and single-crystal X-ray diffraction. Distorted octahedral and trigonal bipyramidal molecular structures have been established for prepared complexes. These unexpected structural distinctions between chemically related compounds are defined by the principally different coordination modes of O,O′-dipropyldithiophosphate and O,O′-di-iso-butyldithiophosphate ligands in their molecular structures (i.e., S,S′-bidentate chelating and S-unidentately coordinated, respectively). To characterise quantitatively phosphorus sites in both species of dithiophosphate ligands, ³¹P chemical shift anisotropy parameters (δ_aniso and η) were calculated from spinning sideband manifolds in MAS NMR spectra. The ³¹P chemical shift tensors for the bidentate chelating and unidentately coordinated dithiophosphate ligands display a profoundly rhombic and nearly axially symmetric characters, respectively.     

Canopy throughfall of Picea abies (L.) Karst. as depending on trace gas concentrations

At six sites in central Germany consequences of SO₂, NO_X and O₃ deposition and of acid precipitation on canopy throughfall of sulphate, nitrate, ammonium, organic acids and of metal cations from Norway spruce crowns were investigated in the field. Measured canopy throughfall rates (mmol ion kg^-1 needle dw a^-1 are separated in (i) background ion throughfall rates in clean air and (ii) trace gas-(or acid interception)-dependent throughfall rates at ambient trace gas concentrations. Based on synchronously measured pollution, precipitation and canopy throughfall data, statistical response functions are given, which allow the separate estimation of annual rates of sulphur and nitrogen deposition into spruce canopies if only annual means of SO₂ or NO₂ concentrations in air are known. The specific SO₂ deposition rate of (0.841±0.214) mmol S kg^-1 needle dw a^-1 (nPa SO₂ Pa^-1)^-1 is 2.3 times higher than the specific stomatal SO₂ uptake. The NO₂-dependent nitrogen deposition of (2.464±0.707) mmol N kg^-1 needle dw a^-1 (nPa NO₂ Pa^-1)^-1 is 2.2 times higher than the specific stomatal NO_X (NO₂+NO) uptake. These ratios (2.32.2) are explained by the percentage of annual hours with open needle stomata. The shape of observed epicuticular SO₂ and NO_X deposition curves and of stomatal SO₂ and NO_X uptake curves are congruent. As for stomatal NO_X uptake, there is an apparent compensation point at (5 to 8) nPa NO₂ Pa^-1. There is significant SO₂-dependent canopy throughfall of Ca>K>Al>Mg>Fe in this order of relative importance. NO_X deposition in spruce canopies reduces K⁺ throughfall and it weakly promotes throughfall of Mn²⁺ and Zn²⁺. There was no significant codeposition of sulphate and ammonium and no ion exchange of intercepted H₃O⁺ with nutrient cations at the measured ambient pH values of the precipitation water. In the presence of O₃, throughfall of Mn²⁺ is reduced and throughfall of K⁺, Ca²⁺ and Al³⁺ is enhanced. In the cooperative presence of SO₂, NO₂ and O₃ pollution in the field there is a 1.3-fold increase of the annual K⁺ demand and a 1.5-fold Mg²⁺ demand of spruce canopies relative to the situation in clean air. This trace gas-dependent additional cation demand of spruce canopies corresponds to a needle loss percentage of (23 to 33)% if the additional K⁺ and Mg²⁺ throughfall could not be recycled in spruce ecosystems. Observed canopy thinning ranges from (13 to 26)% at the investigated six spruce stands.Abbreviations A_spec Specific needle surface area per kg needle dry matter (m²kg^-1 needle dw) - A_tot Total needle surface of spruce stands (ha ha^-1) - [gas]_a Ambient trace gas concentration (gas=SO₂; NO₂ or O₃) in air (nPa Pa^-1=ppb) - GP Number of days per annual growth period d a^-1) - IC_H30 ⁺ Acid interception rate (Eq H₃O⁺ kg^-1 needle dw a^-1) - k_o Trace gas-independent ion throughfall rate constant (mmol kg^-1 needle dw a^-1) - k_gas SO₂-,NO₂-or O₃-dependent ion throughfall rate per unit of trace gas pollution (mmol kg^-1 needle dw a^-1 (nPa Pa^-1)^-1) - k_H30 Specific H₃O⁺/Me⁺ exchange ratio (mol mol^-1) - L_o Background throughfall rate at [gas]_a=0 (mmol kg^-1 needle dw a^-1) - L_ion Canopy throughfall rate of ions (mmol kg^-1 needle dw a^-1) - L'_ion Trace gas dependent ion throughfall (mEq kg^-1 needle dw a^-1 (nPa Pa^-1)^-1) - LAI Leaf area index of the canopy (m² projected needle surface m^-2 ground) - Me⁺ Equivalents of metal cations (Eq) - N Stock of needles of spuce stands in the field (kg needle dw ha^-1) - P_% Percentage of needle loss relative to a healthy reference (%) - r Pearson correlation coefficient (no dimension) - R COO^--Sum of all organic anion equivalents Cat⁺ - An^- (Eq kg^-1 needle dw a^-1) - An^- Sum of all measured inorganic anion equivalents (Eq kg^-1 needle dw a^-1) - Cat⁺ Sum of all measured inorganic cation equivalents (Eq kg^-1 needle dw a^-1)     

The synthesis and toxicity of tripodal tricarbonyl rhenium complexes as radiopharmaceutical models

We report the synthesis and toxicity of a series of rhenium(I) tricarbonyl complexes incorporating the trisaminomethylethane (TAME) ligand. Compounds with the (TAME)Re(CO)₃⁺ cation were synthesized via several routes, including by use of Re(CO)₅X precursors as well as the aqueous cation Re(CO)₃(H₂O)₃⁺. Salts of the formula [(TAME)Re(CO)₃]X where X = Br⁻, Cl⁻, NO₃⁻, PF₆⁻ and ClO₄⁻ were evaluated using two cell lines: the monoclonal S3 HeLa line and a vascular smooth muscle cell line harvested from mice. All compounds have isostructural cations and differ only in the identity of the non-coordinating anion. None of the complexes exhibited any appreciable toxicity in the HeLa line up to the solubility limit. In the vascular smooth muscle cell line, the bromide salt exhibited some cytotoxicity, but this observation most likely results from the presence of bromide anion, which has been shown to have limited toxicity.     

Stereochemistry of protected ornithine side chains in gramicidin S derivatives and their resistance to N-methylation

Summary Derivatives of gramicidin S (GS) and its mono- and di-d-cyclohexylalanined-Cha) analogs possessing various protecting groups on Orn side chains were prepared.¹H NMR spectra of the unsymmetrically protected analogs [Orn(X)², Orn(X^′)^2′,d-Cha⁴]GS were similar to the composites of the spectra of the symmetrical derivatives [Orn(X)^2,2′,d-Cha^4,4′]GS and [Orn(X^′)^2,2′]Gs, revealing the proximity of the protecting groups of N^δH of Orn residues at the 2 and 2^′ positions to the side chains ofd-Phe (ord-Cha) residues at the 4 and 4^′ positions, respectively. The results indicated the presence of H-bonds between the N^°H of Orn and the carbonyl ofd-Phe residues in the i→i+2 sense and not in i→i-3, which was also supported by the ROESY analysis. The substantially strong H-bonds can explain the observed resistance of the urethane NH of the Orn side chains in the GS derivatives to the N-methylation with CH₃I−Ag₂O in DMF.     

Synthesis, X-ray structures and properties of the first tris-dioximate cobalt clathrochelates with nonequivalent chelate ribbed fragments

One-pot macrocyclization and reduction of the kinetically inert nonmacrocyclic cobalt(III) bis-α-benzyldioximate and dimethylglyoximate with BF₃·O(C₂H₅)₂ and metallic silver followed by cycloaddition of the corresponding α-dioxime to the generated insitu macrocyclic cobalt(II) bis-dioximates afforded the cobalt(II) clathrochelates with nonequivalent α-dioximate fragments. The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV-Vis, ¹H, ¹³C{¹H} and ¹⁹F NMR spectroscopies, magnetochemistry, EPR, and X-ray crystallography. The coordination polyhedra of an encapsulated in a three-dimensional macrobicyclic ligand cavity cobalt(II) ion have a distorted trigonal prismatic geometry. The displacement of a caged metal ion from the centers of these polyhedra is caused mainly by the Jahn-Teller effect. Magnetochemical data for cobalt(II) clathrochelates obtained characterize them as the low-spin complexes in the temperature range of 2-400 K. The cyclic voltammograms of the synthesized clathrochelates contain the one-electron oxidation and reduction waves. The increase of the electron-donating properties of the ribbed substituents causes the negative shift of these waves. A comparative analysis of the reduction and oxidation potentials allowed to assign these processes to the cobalt-centered reduction and oxidation. The “electrochemical gap” values for clathrochelates studied are very small and characteristic of the complexes with the redox processes localized on the molecular orbitals which are close in energy.     

Optimization of polylactic-co-glycolic acid nanoparticles containing itraconazole using 2<Superscript>3</Superscript> factorial design

This study investigated the utility of a 2³ factorial design and optimization process for polylactic-co-glycolic acid (PLGA) nanoparticles containing itraconazole with 5 replicates at the center of the design. Nanoparticles were prepared by solvent displacement technique with PLGAX ₁ (10, 100 mg/mL), benzyl benzoateX ₂ (5, 20 μg/mL), and itraconazoleX ₃ (200, 1800 μg/mL). Particle size (Y ₁), the amount of itraconazole entrapped in the nanoparticles (Y ₂), and encapsulation efficiency (Y ₃) were used as responses. A validated statistical model having significant coefficient figures (P<.001) for the particle size (Y ₁), the amount of itraconazole entrapped in the nanoparticles (Y ₂), and encapsulation efficiency (Y ₃) as function of the PLGA (X ₁), benzyl benzoate (X ₂), and itraconazole (X ₃) were developed: Y₁=373.75+66.54X₁+52.09X₂+105.06X₃−4.73X₁X₂+46.30X₁X₃; Y₂=472.93+73.45X₁+ 169.06X₂+333.03X₃+62.40X₁X₃+141.49X₂X₃; Y₃= 57.36+6.53X₁+15.52X₂−12.59X₃+1.01X₁X₃+ 1.73X₂X₃.X ₁,X ₂, andX ₃ had a significant effect (P<.001) onY ₁,Y ₂, andY ₃. The particle size, the amount of itraconazole entrapped in the nanoparticles, and the encapsulation efficiency of the 4 formulas were in agreement with the predictions obtained from the models (P<.05). An overlay plot for the 3 responses shows the boundary in whichY ₁ shows the boundary in which a number of combinations of concentration of PLGA, benzyl benzoate, and itraconazole will result in a satisfactory process. Using the desirability approach with the same constraints, the solution composition having the highest overall desirability (D=0.769) was 10 mg/mL of PLGA, 16.94 μg/mL of benzyl benzoate, and 1001.01 μg/mL of itraconazole. This approach allowed the selection of the optimum formulation ingredients for PLGA nanoparticles containing itraconazole of 500 μg/mL.     

Synthesis and structural characterization of dimolybdenum(IV) and molybdenum(VI) complexes with trisbenzenethiolatophosphine ligands

The synthesis and crystal structures of two high valent molybdenum complexes containing trisbenzenethiolatophosphine ligands, [Mo₂(PS3)₂(PS3H)] (1) and [Mo(PS3″)₂] (2), where PS3 = [P(C₆H₄-2-S)₃]³⁻, PS3H = [P(C₆H₄-2-S)₂(C₆H₄-2-SH)]²⁻, and PS3″ = [P(C₆H₃-3-Me₃Si-2-S)₃]³⁻, are described. Compound 1 is a dimeric Mo(IV) species containing three PS3 ligands with an uncoordinated thiol group. An intramolecular hydrogen bonding S-H?S was found in the structure. Two molybdenum ions are bridged by three thiolates. The geometry can be described as two pentagonal bipyramids sharing a triangle face formed by three bridging S atoms. Compound 2 is a Mo(VI) species binding with two tetradentate PS3″ ligands. The eight-coordinate molybdenum center adopts a dodecahedral geometry.     

Phytohormone effects on hydrolytic activity of phosphohydrolases in red beet (Beta vulgaris L.) tonoplasts

The effects of indole-3-acetic acid (IAA), abscisic acid (ABA), gibberellic acid (GA₃) and kinetin on the hydrolytic activity of proton pumps (adenosine triphosphatase, H⁺-ATPase, pyrophosphatase, H⁺-PPase) of tonoplasts isolated from stored red beet (Beta vulgaris L. cv. Bordo) roots were studied. Results suggest that the phytohormones can regulate the hydrolytic activities of H⁺-ATPase and H⁺-PPase of the vacuolar membrane. Each of the proton pumps of the tonoplast has its own regulators in spite of similar localization and functions. IAA and kinetin seem to be regulators of the hydrolytic activity for H⁺-PPase whereas for H⁺-ATPase it may be GA₃. Stimulation of enzyme activity by all hormones occurred at concentrations of 10^–6 to 10^–7 M.Abbreviations IAA indole-3-acetic acid - ABA abscisic acid - GA₃ gibberellic acid - H⁺-ATPase adenosine triphosphatase - H⁺-PPase pyrophosphatase - ATP adenosine triphosphate - Tris Tris (hydroxymethyl)-aminomethane - MES (2[N-Morpholino]) ethane sulfonic acid - EDTA ethylene diamine tetraacetic acid - P_i inorganic phosphate     

Synthesis of rhodium and iridium boryl complexes via oxidative addition of haloboranes

B-Chlorocatecholborane undergoes oxidative addition to M(PR₃)₃Cl (M = Rh, R = Me; M = Ir, R = Me, Et) yielding six-coordinate complexes of general formula mer,cis-(PR₃)₃Cl₂M(BO₂C₆H₄). The same M(PR₃)₃Cl complexes also react with B-bromocatecholborane to give a mixture of metal boryl homo- and heterodihalides (PR₃)₃X¹X²M(BO₂C₆H₄) (X¹, X² = Cl, Br), and the observed disproportionation is believed to involve the formation of a heteronuclear halide-bridged intermediate. The alkene 4-vinylanisole failed to react with the six-coordinate, 18-electron (PR₃)₃Cl₂M(BO₂C₆H₄) complexes at ambient temperatures.     

Conformationally Restricted 2-Substituted Wyosine Derivatives. 1H, 13C,and 15N NMR Study

Abstract

It was found by ¹H, ¹³C and ¹⁵N NMR study that substitution of 4,9-dihydro-4, 6-dimethyl-9-oxo-3-(2′,3′,5′-tri-O-acetyl-β-D-ribofuranosyl) imidazo [1,2-a]purine (wyosine triacetate, 1) at C2 position with electronegative groups CH₃O and C₆H₅CH₂O results in a noticeable electron distribution disturbance in the “left-hand” imidazole ring and a significant increase in the North conformer population of the sugar moiety.     

Oxime-functionalized diazamesocyclic derivates and their metal complexes: Effect of the ligand backbones and anions on the generation of novel monomeric and mono-μ-Cl dimeric Cu complexes

Two oxime-functionalized diazamesocyclic derivates, namely, N,N′-bis(acetophenoneoxime)-1,4-diazacycloheptane (H₂L¹) and N,N′-bis(acetophenonoxime)-1,5-diazacyclooctane (H₂L²), have been prepared and characterized. Both ligands (obtained in the hydrochloride form) can form stable metal complexes with Cu^II and Ni^II salts, the crystal structures of which were determined by X-ray diffraction technique. The reactions of H₂L¹ with Cu(ClO₄)₂ and Ni(ClO₄)₂ afford a penta-coordinated mononuclear complex [Cu(H₂L¹)Cl] · ClO₄ (1) and a four-coordinated monomeric [Ni(HL¹)] · ClO₄ (2), in which the ligand is monodeprotonated. The ligand H₂L² also forms a quite similar mononuclear [Ni(HL²)] · ClO₄ complex with Ni(ClO₄)₂, according to our previous work. However, reactions of different Cu^II salts [Cu(ClO₄)₂, CuCl₂ and Cu(NO₃)₂ for 3, and CuSO₄ for 4] with H₂L² in the presence of NaClO₄ yield two unusual mono-μ-Cl dinuclear Cu^II complexes [Cu₂(HL²)₂Cl] · (ClO₄) (3), and [Cu₂(H₂L²)(HL²)Cl] · (ClO₄)₂ · (H₂O)(4). These results indicate that the resultant Cu^II complexes (1, 3 and 4) are sensitive to the backbones of diazamesocycles and even auxiliary anions.