Extending the coordination chemistry of cobalt with the metalloligand [Pt2(μ-S)2(PPh3)4]: Synthesis of the first cobalt(III) derivatives

The coordination chemistry of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] towards cobalt(II) and cobalt(III) centres has been explored using an electrospray ionisation mass spectrometry (ESI MS)-directed methodology. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with CoCl₂·6H₂O in methanol gave a green-yellow suspension of the known adduct [Pt₂(μ-S)₂(PPh₃)₄CoCl₂], and the CoBr₂ adduct could be similarly prepared. When in situ-generated [Pt₂(μ-S)₂(PPh₃)₄CoCl₂] is reacted with 8-hydroxyquinoline (HQ) and base, the initial product is the cobalt(II) adduct [Pt₂(μ-S)₂(PPh₃)₄CoQ]⁺, which is then converted in air to the cobalt(III) adduct [Pt₂(μ-S)₂(PPh₃)₄CoQ₂]⁺, isolated as its hexafluorophosphate salt. The corresponding picolinate (Pic) derivative [Pt₂(μ-S)₂(PPh₃)₄Co(Pic)₂]⁺ was similarly prepared, however reaction of [Pt₂(μ-S)₂(PPh₃)₄], CoCl₂·6H₂O and 8-(tosylamino)quinoline (HTQ) produced only the cobalt(II) adduct [Pt₂(μ-S)₂(PPh₃)₄CoTQ]⁺. Reactions of [Pt₂(μ-S)₂(PPh₃)₄], CoCl₂·6H₂O and dithiocarbamates gave cobalt(III) complexes [Pt₂(μ-S)₂(PPh₃)₄Co(S₂CNR₂)₂]⁺ [R = Et or R₂ = (CH₂)₄], and proceeded much more rapidly, consistent with the known ability of the dithiocarbamate ligand to stabilize cobalt in higher oxidation states. A study of the fragmentation of cobalt(III) adducts by positive-ion ESI mass spectrometry indicated that [Pt₂(μ-S)₂(PPh₃)₄CoQ₂]⁺ fragments to form the radical cation [Pt₂(μ-S)₂(PPh₃)₄]⁺, which could also be generated by ESI MS analysis of [Pt₂(μ-S)₂(PPh₃)₄] in methanol-NaOH solution. In contrast, the corresponding indium(III) derivative [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺, and the cobalt(III) dithiocarbamate [Pt₂(μ-S)₂(PPh₃)₄Co(S₂CN(CH₂)₄)₂]⁺ are much more reluctant to fragment under analogous conditions, and the differences are discussed in terms of cobalt(III) redox chemistry.     

Further studies on the coordination chemistry of [Pt2(μ-S)2(PPh3)4] towards indium(III) substrates

The reactivity of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] towards a variety of indium(III) substrates has been explored. Reaction with excess In(NO₃)₃ and halide (KBr or NaI) gave the four-coordinate adducts [Pt₂(μ-S)₂(PPh₃)₄InX₂]⁺[InX₄]⁻ (X = Br, I). An X-ray structure determination on the iodo complex revealed a slightly distorted tetrahedral coordination geometry at indium. In contrast, reaction of [Pt₂(μ-S)₂(PPh₃)₄] with indium(III) chloride was more complex; the ion [Pt₂(μ-S)₂(PPh₃)₄InCl₂]⁺ was initially observed in solution (using ESI mass spectrometry), and isolated as its BPh₄⁻ salt. Analysis of [Pt₂(μ-S)₂(PPh₃)₄InCl₂]⁺[BPh₄]⁻ by ESI MS showed the parent cation when analysed in MeCN solution. However in solutions containing methanol, partial solvolysis occurred to give the di-indium species [{Pt₂(μ-S)₂(PPh₃)₄InCl(OMe)}₂]²⁺ (proposed to contain an In₂(μ-OMe)₂ unit with five-coordinate indium) and its fragment ion [Pt₂(μ-S)₂(PPh₃)₄InCl(OMe)]⁺. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with InCl₃·3H₂O, 8-hydroxyquinoline (HQ) and trimethylamine in methanol gave the adduct [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺, isolated as its PF₆⁻ salt. The same cationic complex is formed when [Pt₂(μ-S)₂(PPh₃)₄] is reacted with InQ₃ in methanol, but in this case the product is contaminated with the mononuclear complex [(Ph₃P)₂PtQ]⁺ formed by disintegration of the trinuclear complex [Pt₂(μ-S)₂(PPh₃)₄InQ₂]⁺ with byproduct Q⁻. [(Ph₃P)₂PtQ]⁺BPh₄⁻ was independently prepared from cis-[PtCl₂(PPh₃)₂] and HQ/Me₃N, and is the first example of a platinum 8-hydroxyquinolinate complex containing phosphine ligands.     

Coordination chemistry of the metalloligand [Pt2(μ-S)2(PPh3)4] with nickel(II) complexes - an electrospray mass spectrometry directed synthetic study

The reactivity of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of nickel(II) complexes has been probed using electrospray ionisation mass spectrometry coupled with synthesis and characterisation in selected systems. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with [Ni(NCS)₂(PPh₃)₂] gives [Pt₂(μ-S)₂(PPh₃)₄Ni(NCS)(PPh₃)]⁺, isolated as its BPh₄ ⁻ salt; the same product is obtained in the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with [NiBr₂(PPh₃)₂] and KNCS. An X-ray structure determination reveals the expected sulfide-bridged structure, with an N-bonded thiocyanate ligand and a square-planar coordination geometry about nickel. A range of nickel(II) complexes NiL₂, containing β-diketonate, 8-hydroxyquinolinate, or salicylaldehyde oximate ligands react similarly, giving [Pt₂(μ-S)₂(PPh₃)₄NiL]⁺ cations.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

‘Synthetic prospecting’ using an electrospray ionisation mass spectrometry directed survey of the alkylation and arylation chemistry of [Pt2(μ-S)2(PPh3)4]

Electrospray ionisation mass spectrometry (ESI-MS) has been used as an analytical tool in a wide-ranging scoping study of the alkylation and arylation reactions of [Pt₂(μ-S)₂(PPh₃)₄]. From these experiments, the factors that influence the formation of different product species - formed by mono- or di-alkylation - are determined. If the alkylating agent is an alkyl chloride or sulfate, monoalkylation followed by dialkylation of the two sulfido groups occurs, dependent on the alkylating power of the reagent used. For example, n-butyl chloride gives solely [Pt₂(μ-S)(μ-SBu)(PPh₃)₄]⁺ while dimethyl sulfate gives [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. This species, previously unisolated is stable in the absence of good nucleophiles, but the addition of potassium iodide results in rapid conversion to [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺. This iodo complex is also observed from the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess MeI, after the initial formation of mono- and di-methylated species. In these reactions, the iodide presumably displaces a phosphine ligand, which is then quaternised by excess alkylating agent. Changing the alkylating agent to a longer chain alkyl iodide or methyl bromide decreases the rate of alkylation of the sulfide in the initially formed [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺. Mixed-thiolate species of the type [Pt₂(μ-SMe)(μ-SR)(PPh₃)₄]²⁺ are easily generated by reaction of [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ with excess Me₂SO₄ and is also dependent on the avoidance of nucleophiles. Reactions towards α,ω-dialkylating agents are surveyed; the chain length is found to have a dramatic effect on the rate of the second intramolecular cyclisation process, illustrated by a competitive reactivity study involving a mixture of Br(CH₂)₄Br and Br(CH₂)₅Br; on completion of the reaction the former gives [Pt₂{μ-S(CH₂)₄S}(PPh₃)₄]²⁺ while the latter predominantly gives monoalkylated[Pt₂(μ-S){μ-S(CH₂)₅Br}(PPh₃)₄]⁺. The reactivity of o- and p-dihaloxylenes has been explored, with the reaction with p-BrCH₂C₆H₄CH₂Br giving the bridged species [(PPh₃)₄Pt₂(μ-S)(μ-SCH₂C₆H₄CH₂S)(μ-S)Pt₂(PPh₃)₄]²⁺. Arylation reactions of [Pt₂(μ-S)₂(PPh₃)₄] with halobenzenes and 2-bromoheterocyclic compounds (pyridine, thiophene) are also described.     

Sulfide-bridged aggregates from the metalloligand [Pt2(μ-S)2(PPh3)4] and β-diketonate complexes of cobalt(II) and zinc(II)

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a range of zinc(II) and cobalt(II) complexes ML₂, where L is a β-diketonate ligand CH₃COCHCOCH₃, PhCOCHCOPh, CF₃COCHCOTh (Th = 2-thienyl)] permits the synthesis of adducts [Pt₂(μ-S)₂(PPh₃)₄M(diketonate)]⁺, isolated as their salts in moderate yields. The cobalt and zinc acetylacetonate complexes were characterised by single-crystal X-ray diffraction studies, which reveal isomorphous structures, with tetrahedral heterometal centres.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Synthesis and characterisation of adducts of [Pt2(μ-S)2(PPh3)4] with organo-palladium and platinum-hydride substrates

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of palladium(II) complexes containing organometallic ligands (cyclopalladated N-donor ligands, η³-allyl, phenyl) have been explored, leading to the formation of a series of cationic, trinuclear sulfido-bridged aggregates containing {Pt₂PdS₂} cores. [Pt₂(μ-S)₂(PPh₃)₄] also reacts with the platinum(II) hydride complex trans-[PtHCl(PPh₃)₂] giving the adduct [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]⁺. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄PdPh(PPh₃)]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]PF₆ are reported, and show the expected bis μ₃-sulfido aggregates with three square-planar metal centres.     

Dinuclear platinum complexes with designer thiolate ligands from the monoalkylation of [Pt2(μ-S)2(PPh3)4]

Alkylation reactions of the nucleophilic platinum(II) sulfide complex [Pt₂(μ-S)₂(PPh₃)₄] with functionalised alkylating agents have been investigated as a versatile synthetic route to dinuclear, cationic sulfide-thiolate complexes of the type [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺, extending the range of thiolate complexes that can be prepared using this methodology. A wide range of functional groups can be incorporated, using appropriate alkylating agents, and include ketone, ester, amide, hydrazone, semicarbazone, thiosemicarbazone, oxime, guanidine, urea and thiourea groups.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

Influence of chain length on mono- versus di-alkylation in the reactivity of [Pt2(μ-S)2(PPh3)4] towards α,ω-dihalo-n-alkanes; a synthetic route to platinum(II) ω-haloalkylthiolate complexes

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] with α,ω-dibromoalkanes Br(CH₂)_nBr (n = 4, 5, 6, 8, 12) gave mono-alkylated [Pt₂(μ-S){μ-S(CH₂)_nBr}(PPh₃)₄]⁺ and/or di-alkylated [Pt₂(μ-S(CH₂)_nS}(PPh₃)₄]²⁺ products, depending on the alkyl chain length and the reaction conditions. With longer chains (n = 8, 12), intramolecular di-alkylation does not proceed in refluxing methanol, with the mono-alkylated products [Pt₂(μ-S){μ-S(CH₂)_nBr}(PPh₃)₄]⁺ being the dominant products when excess alkylating agent is used. The bridged complex [{Pt₂(μ-S)₂(PPh₃)₄}₂{μ-(CH₂)₁₂}]²⁺ was accessible from the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with 0.5 mol equivalents of Br(CH₂)₁₂Br. [Pt₂(μ-S){μ-S(CH₂)₄Br}(PPh₃)₄]⁺ can be cleanly isolated as its BPh₄⁻ salt, but undergoes facile intramolecular di-alkylation at −18 °C, giving the known species [Pt₂(μ-S(CH₂)₄S}(PPh₃)₄]²⁺. The reaction of I(CH₂)₆I with [Pt₂(μ-S)₂(PPh₃)₄] similarly gives [Pt₂(μ-S){μ-S(CH₂)₆I}(PPh₃)₄]⁺, which is fairly stable towards intramolecular di-alkylation once isolated. These reactions provide a facile route to ω-haloalkylthiolate complexes which are poorly defined in the literature. X-ray crystal structures of [Pt₂(μ-S){μ-S(CH₂)₅Br}(PPh₃)₄]BPh₄ and [Pt₂(μ-S(CH₂)₅S}(PPh₃)₄](BPh₄)₂ are reported, together with a study of these complexes by electrospray ionisation mass spectrometry. All complexes fragment by dissociation of PPh₃ ligands, and the bromoalkylthiolate complexes show additional fragment ions [Pt₂(μ-S){μ-S(CH₂)_n−2CHCH₂}(PPh₃)_m]⁺ (m = 2 or 3; m ≠ 4), most significant for n = 4, formed by elimination of HBr.     

Further studies on the dialkylation chemistry of [Pt2(μ-S)2(PPh3)4] with activated alkyl halides RC(O)CH2X (X = Cl, Br)

Further studies have been carried out into the reactivity of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of activated alkylating agents of the type RC(O)CH₂X (R = organic moiety, e.g. phenyl, pyrenyl; X = Cl, Br). Alkylation of both sulfide centers is observed for PhC(O)CH₂Br, 3-(bromoacetyl)coumarin [CouC(O)CH₂Br], and 1-(bromoacetyl)pyrene [PyrC(O)CH₂Br], giving dications [Pt₂{μ-SCH₂C(O)R}₂(PPh₃)₄]²⁺, isolated as their PF₆⁻ salts. The X-ray structure of [Pt₂{μ-SCH₂C(O)Ph}₂(PPh₃)₄](PF₆)₂ shows the presence of short Pt?O contacts. In contrast, the corresponding chloro compounds [typified by PhC(O)CH₂Cl] and imino analogues [e.g. PhC(NOH)CH₂Br] do not dialkylate [Pt₂(μ-S)₂(PPh₃)₄]. The ability of PhC(O)CH₂Br to dialkylate [Pt₂(μ-S)₂(PPh₃)₄] allows the synthesis of new mixed-alkyl dithiolate derivatives of the type [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₄]²⁺ (R = Et or n-Bu), through alkylation of in situ-generated monoalkylated compounds [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (from [Pt₂(μ-S)₂(PPh₃)₄] and excess RBr). In these heterodialkylated systems ligand replacement of PPh₃ occurs by the bromide ions in the reaction mixture forming monocations [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₃Br]⁺. This ligand substitution can be easily suppressed by addition of PPh₃ to the reaction mixture. The complex [Pt₂{μ-SCH₂C(O)Ph}(μ-SBu)(PPh₃)₄]²⁺ was crystallographically characterized. X-ray crystal structures of the bromide-containing complexes [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₃Br]⁺ (R = Et, Bu) are also reported. In both structures the coordinated bromide is trans to the SCH₂C(O)Ph ligand, which adopts an axial position, while the ethyl and butyl substituents adopt equatorial positions, in contrast to the structures of the dialkylated complexes [Pt₂{μ-SCH₂C(O)Ph}₂(PPh₃)₄]²⁺ and [Pt₂{μ-SCH₂C(O)Ph}(μ-SBu)(PPh₃)₄]²⁺ (and many other known analogues) where both alkyl groups adopt axial positions.     

Synthesis and structural characterisation of the lead-platinum sulfido aggregates [Pt2(μ-S)2(PPh3)4PbX2] (X = Br, I); promotion of rare tetrahedral geometry for lead(II)

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] with excess PbBr₂ or PbI₂ in methanolic suspension result in the formation of the neutral lead(II) halide adducts [Pt₂(μ-S)₂(PPh₃)₄PbX₂] (X = Br, I). The X-ray structure determination of the lead iodide adduct reveals an essentially tetrahedral lead(II) centre, which is a rare coordination geometry for lead(II), which almost invariably is hemidirected, with a stereochemically active lone pair. In contrast, the structure of the PbBr₂ adduct, although suffering from some disorder, shows a more typical, distorted arrangement of ligands; these results are discussed in terms of the tendency for soft, bulky ligands to promote symmetric, holodirected geometries. The ESI mass spectra of the adducts are reported, and yield [M−halide]⁺ ions.     

The reactivity of [Pt2(μ-S)2(PPh3)4] towards difunctional chloroacetamide alkylating agents: Formation of cyclized or bridged products

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards some bis(chloroacetamide) alkylating agents have been investigated. Reaction with one mole equivalent of the hydrazine-derived compound ClCH₂C(O)NHNHC(O)CH₂Cl led to the cyclized product [Pt₂{SCH₂C(O)NHNHC(O)CH₂S}(PPh₃)₄]²⁺ which showed two different PPh₃ environments in the ³¹P{¹H} NMR spectrum, as a result of non-fluxional behavior of the dithiolate ligand in solution. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the ortho and para isomers of the phenylenediamine-derived bis(chloroacetamides) ClCH₂C(O)NHC₆H₄NHC(O)CH₂Cl gave tetrametallic complexes containing two {Pt₂S₂} moieties spanned by the CH₂C(O)NHC₆H₄NHC(O)CH₂ group. Both the ortho and para isomers were crystallographically characterized; in the ortho isomer there is intramolecular CO···H-N and S···H-N hydrogen bonding involving the two amide groups.     

Synthesis of some pentanuclear platinum clusters [Pt5(CO)6(L)4]. The X-ray structure of [Pt5(μ-CO)5(CO)(PCy3)4]

[Pt₅(μ-CO)₅(CO)L₄] (L = PPh₃1, PPh₂Bz 2, AsPh₃3, PEt₃4, PCy₃5) have been synthesized by reacting [Pt₃(μ-CO)₃(PR₃)₃] with H₂O₂ (1 and 2), by reduction of cis-[PtCl₂(CO)(PEt₃)] with Zn dust (4), and by the Zn reduction of [Pt₃(μ-CO)₃(PCy₃)₃] in the presence of [PtCl₂(CH₃CN)₂] (5). Complex 5 has not been observed previously and has been characterized by X-ray crystallography. Oxidation of the phosphine ligands with H₂O₂ is a new way to synthesize 1 and 2. The first complete NMR characterization of these complexes has also been achieved, and showed that these pentanuclear cluster complexes exhibit similar stereochemistries in solution and in the solid state. The observed ¹J_Pt-Pt values do not have any correlation with the corresponding bond lengths, again pointing out the irregular behaviour of such parameter in Pt complexes.     

Dynamic properties of the fluxional Rh2H(μ-PPh2)2(PPh3)3 complex

The rhodium dimer [Rh₂H(PPh₂)₂(PPh₃)₃]⁻ was prepared from RhCl(PPh₃)₃ and K₄Sn₉ in the presence of 2,2,2-cryptand in ethylenediamine/toluene solvent mixtures. The [K(2,2,2-crypt)]⁺ salt was isolated and characterized via NMR and X-ray diffraction studies. The solid state structure reveals a binuclear, diphenylphosphido-bridged, 32 electron Rh(I)-Rh(I) complex with edge-shared tetrahedral and square planar Rh centers with overall C_s point symmetry. 1-D and 2-D ¹H, ³¹P, and ³¹P{¹H} NMR experiments were used to characterize the complex.     

Platinum(II) halide complexes of PPh2(CFCF2) and PPh2(CClCF2). The synthesis and crystal structure of [PtI(μ-I){PPh2(CXCF2)}]2, (X = F, Cl); the first crystallographically characterised iodide-bridged platinum(II) phosphine dimers

The reactions of the fluorovinyl-substituted phosphines PPh₂(CFCF₂) and PPh₂(CClCF₂), with K₂PtX₄ (X = Br, I) have been investigated. The resulting complexes have been characterized by a combination of ¹⁹F and ³¹P{¹H} NMR, IR and Raman spectroscopy. The reactions of these phosphines with K₂PtBr₄ yield the monomeric complexes cis-[PtBr₂{PPh₂(CFCF₂)}₂] (1) and trans-[PtBr₂{PPh₂(CClCF₂)}₂] (2), respectively, whilst the reactions with K₂PtI₄ yield both the monomeric species trans-[PtI₂{PPh₂(CXCF₂)}₂], {X = F (3), Cl (4)}, and the dimeric species [PtI(μ-I){PPh₂(CXCF₂)}]₂, {X = F (5), Cl (6)}. The dimers 5 and 6 represent the first crystallographically characterised platinum(II) iodide-bridged phosphine complexes, and both adopt the symmetric-trans structure.     

Thiolato-bridged “Linear” trinuclear platinum complexes [Pt3(μ-SR)4(dppm)2]

Thiolato-bridged tri- and dinuclear platinum complexes of the types [Pt₃(μ-SR)₄(dppm)₂]²⁺ (1) and [Pt₂(μ-ER)₂(dppm)₂]²⁺ (2) (E=S or Se; R=alkyl or aryl; dppm=bis(diphenylphosphino)methane) have been prepared using the mononuclear precursors [Pt(ER)₂(dppm)]. The complexes have been characterized by NMR (¹H, ¹³C, ³¹P, ¹⁹⁵Pt), FT-IR and FAB mass spectral data. The structure of [Pt₃(μ-SC₆H₄CH₃-4)₄(dppm)₂][CF₃SO₃]₂ · 6CH₂Cl₂ (1d), has been established through X-ray crystallography, revealing a zig-zag arrangement of the three coordination spheres around the platinum atoms.