Reactivity of the ligand bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]ether (L1) with Pd(II) and Pt(II): crystal structure of cis-[PtCl2(L1)]

The coordination chemistry of the ligand bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]ether (L₁) was tested in front of Pd(II) and Pt(II). Complexes cis-[MCl₂(L₁)] (M=Pd(II) and Pt(II)) were obtained, due to the chelate condition of the ligand and the formation of a stable 10-membered ring. The crystal structure of cis-[PtCl₂(L₁)] was resolved by X-ray diffraction. Treatment of [PdCl₂(L₁)] or [Pd(CH₃CN)₄](BF₄)₂ with AgBF₄ in the presence of L₁ gave the complex [Pd(L₁)₂](BF₄)₂. The initial cis-[PdCl₂(L₁)] was recovered by reacting [Pd(L₁)₂](BF₄)₂ with an excess of NEt₄Cl. Reaction of [Pt(CH₃CN)₄](BF₄)₂ (generated in situ from [PtCl₂(CH₃CN)₂] and AgBF₄ in acetonitrile) with ligand L₁ yields complex [Pt(L₁)₂](BF₄)₂.     

Reactivity of [PdCl(bdtp)](BF4) with monodentate neutral and anionic ligands. Structure of [Pd(bdtp)(PPh3)](BF4)2 (bdtp = 1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane)

Complex [PdCl(bdtp)](BF₄), in presence of AgBF₄ or NaBF₄, reacts with pyridine (py), triphenylphosphine (PPh₃), cyanide (CN⁻), thiocyanate (SCN⁻) or azide (N₃⁻) ligands, leading to the formation of the following complexes: [Pd(bdtp)(py)](BF₄)₂ [1](BF₄)₂, [Pd(bdtp)(PPh₃)](BF₄)₂ [2](BF₄)₂, [Pd(CN)(bdtp)](BF₄) [3](BF₄), [Pd(SCN)(bdtp)](BF₄) [4](BF₄) and [Pd(N₃)(bdtp)](BF₄) [5](BF₄). These complexes were characterised by elemental analyses, mass spectrometry, conductivity measurements, infrared and NMR spectroscopies. The crystal structure of [2](BF₄)₂ was determined by single-crystal X-ray diffraction methods. The metal atom is coordinated by two azine nitrogen atoms, and one sulfur atom of the thioether-pyrazole ligand and one triphenylphosphine in a distorted square-planar geometry.     

Mixed-ligand compounds incorporating quadruply bonded dimolybdenum(II) core: Syntheses, structures and reactivity studies

Reaction of cis-[Mo₂(OAc)₂(CH₃CN)₆][BF₄]₂ with NP-Et,Me (2-ethyl-3-methyl-1,8-naphthyridine) in acetonitrile provides trans-[Mo₂(NP-Et,Me)₂(OAc)₂(CH₃CN)][BF₄]₂ (1). Partial protonation of 1 by HBF₄·Et₂O in acetonitrile leads to trans-[Mo₂(NP-Et,Me)₂(OAc)(CH₃CN)₃][BF₄]₃ (2). In both compounds, NP-R ligands are arranged in a head-to-head (HH) fashion leaving one of the axial sites vacant. Substitution of acetonitriles by NP-Me (3-methyl-1,8-naphthyridine) in trans-[Mo₂(NP-tz)₂(OAc)(CH₃CN)₂][BF₄]₃ provides trans-[Mo₂(NP-tz)₂(OAc)(NP-Me)][BF₄]₃ (3) with retention of configuration. Fully solvated dimolybdenum(II) compound reacts with NP-NH₂ to provide [Mo₂(NP-NH₂)₂(NP-NH)(CH₃CN)₂][BF₄]₃ (4) in which the NP-NH₂ ligands are trans and arranged in a HH fashion. The deprotonated ligand (NP-NH⁻) binds the dimetal unit utilizing naphthyridine nitrogen and amido nitrogen. Treatment of [Mo₂(NP-tz)₂(CH₃CN)₄][CF₃SO₃]₄ with bpym (2,2′-bipyrimidine) followed by crystallization in air provided an oxo complex [Mo₂(NP-tz)₂(μ₂-O)₂(bpym)₂][CF₃SO₃]₄ (5). Compounds 1-5 have been characterized by a variety of spectroscopic techniques and by X-ray crystallography. The reactivity pattern is rationalized based on ligand labilities and thermodynamic stabilities.     

Supramolecular assemblies of new 2-D complexes: Syntheses, crystal structures, spectroscopic and magnetic properties of {[MnAu2(CN)4(NITpPy)2(H2O)2]}n and {[Co(N(CN)2)2(NITpPy)2(H2O)2]}n

Two new complexes, {[MnAu₂(CN)₄(NITpPy)₂(H₂O)₂]}_n (1) and {[Co(N(CN)₂)₂(NITpPy)₂(H₂O)₂]}_n (2), have been synthesized and characterized. The single-crystal X-ray analysis for the complexes 1 and 2 demonstrates that each M(II) (M = Mn or Co) ion assumes a distorted octahedral MN₄O₂ coordination polyhedron. Four nitrogen atoms come from the cyanide groups and the pyridyl rings in a common plane, and two oxygen atoms come from the H₂O molecules in trans-positions. The structures of complexes 1 and 2 illustrate that aurophilicity and/or hydrogen bonding interactions play important roles in increasing dimensionality. Magnetic investigations on complexes 1 and 2 show the presence of weak antiferromagnetic interactions.     

Quantification of cis and trans influences in [PtX(PPh3)3] complexes. A P NMR study

In [PtX(PPh₃)₃]⁺ complexes (X = F, Cl, Br, I, AcO, NO₃, NO₂, H, Me) the mutual cis and trans influences of the PPh₃ groups can be considered constants in the first place, therefore the one bond Pt-P coupling constants of P_(cis) and P_(trans) reflect the cis and trans influences of X. The compounds [PtBr(PPh₃)₃](BF₄) (2), [PtI(PPh₃)₃](BF₄) (3), [Pt(AcO)(PPh₃)₃](BF₄) (4), [Pt(NO₃)(PPh₃)₃](BF₄) (5), and the two isomers [Pt(NO₂-O)(PPh₃)₃](BF₄) (6a) and [Pt(NO₂-N)(PPh₃)₃](BF₄) (6b) have been newly synthesised and the crystal structures of 2 and 4·CH₂Cl₂·0.25C₃H₆O have been determined. From the ¹J_PtP values of all compounds we have deduced the series: I > Br > Cl > NO₃ > ONO > F > AcO > NO₂ > H > Me (cis influence) and Me > H > NO₂ > AcO > I > ONO > Br > Cl > F > NO₃ (trans influence). These sequences are like those obtained for the (neutral) cis- and trans-[PtClX(PPh₃)₂] derivatives, showing that there is no dependence on the charge of the complexes. On the contrary, the weights of both influences, relative to those of X = Cl, were found to depend on the charge and nature of the complex.     

Coordination polymers of 1,8-bis(2-methylthioethoxy)anthraquinone and 1,5-bis(2-methylthioethoxy)anthraquinone with Ag(I): Synthesis and X-ray crystallography

The reaction of 2-(methylthioethanol) with 1,8-dichloroanthraquinone and 1,5-dichloroanthraquinone in THF with base produces 1,8-bis(2-methylthioethoxy)anthraquinone (1) and 1,5-bis(2-methylthioethoxy)anthraquinone (2), respectively. Silver(I) complexes of 1 and 2 have been synthesized after combination with [Ag(CH₃CN)₄]BF₄ in 1:1 M ratio to yield, [(1,8-bis(2-methylthioethoxy)anthraquinone)Ag]BF₄, (3) and [(1,5-bis(2-methylthioethoxy)anthraquinone)Ag·CH₃CN]BF₄, (4). X-ray crystal structures of the free ligand (1) and the Ag(I) complexes (3 and 4) are reported. The intraannular carbonyl group forms a coordinate-covalent bond with Ag(I) and, in the solid state, both silver(I) complexes are found as coordination polymers.     

Reaction of [MCl2(CH3CN)2] (M = Pd(II), Pt(II)) compounds with N1-alkylpyridylpyrazole-derived ligands

Palladium(II) and platinum(II) complexes with N-alkylpyridylpyrazole-derived ligands, 2-(1-ethyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L¹) and 2-(1-octyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L²), cis-[MCl₂(L)] (M = Pd(II), Pt(II)), have been synthesised. Treatment of [PdCl₂(L)] (L = L¹, L²) with excess of ligand (L¹, L²), pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ and NaBPh₄ produced the following complexes: [Pd(L)₂](BPh₄)₂, [Pd(L)(py)₂](BPh₄)₂ and [Pd(L)(PPh₃)₂](BPh₄)₂. All complexes have been characterised by elemental analyses, conductivity, IR and NMR spectroscopies. The crystal structures of cis-[PdCl₂(L²)] (2) and cis-[PtCl₂(L¹)] (3) were determined by a single crystal X-ray diffraction method. In both complexes, the metal atom is coordinated by one pyrazole nitrogen, one pyridine nitrogen and two chlorine atoms in a distorted square-planar geometry. In complex 3, π-π stacking between pairs of molecules is observed.     

Coordination polymers of Cu(II) and Cd(II) with bifunctional chelates of the type dipicolylamino-alkylcarboxylate, (NC5H4CH2)2N(CH2)nCO2H (n = 1, 2, 3 and 4)

A series of bifunctional chelates of the type dipicolylamino-alkylcarboxylate (NC₅H₄CH₂)₂N(CH₂)_nCO₂H (n = 1-4; HL¹-HL⁴, respectively) has been prepared. Reactions of the ligands in aqueous methanol/N,N-dimethylformamide with the appropriate Cu(II) salts yielded the compounds [CuL¹](NO₃)·H₂O (1·H₂O), [CuL²(H₂O)]BF₄·H₂O (2·H₂O), [Cu(HL³)(SO₄)]₂ (3) and [CuL⁴(NO₃)]·MeOH (4·MeOH). While compounds 1, 2 and 4 are one-dimensional, the detailed connectivities within the chains are quite distinct, depending on factors such as alkyl chain length and ligation of aqua ligands or anionic components. In contrast to 1, 2 and 4, the structure of 3 is molecular, a binuclear assembly of edge-sharing Cu(II) ‘4+2’ distorted octahedra. The Cd(II) species, [{CdL²}₂(SO₄)]·4H₂O (5·4H₂O), prepared from HL² and CdSO₄·nH₂O in aqueous methanol/N,N-dimethylformamide, is two-dimensional, with a network constructed from binuclear units of seven coordinate Cd(II), , linked through bridging SO₄²⁻ groups to produce an assembly of linked hexagonal rings [{CdL²}₂(SO₄)]₆.     

Sn-S and Ru-Ru bonds cleavage reactions between [Ph3SnS(CH2)3SSnPh3] and Ru3(CO)12: X-ray crystal structures of [Ph3SnS(CH2)3SSnPh3] and trans-[Ru(CO)4(SnPh3)2]

The organotin complex [Ph₃SnS(CH₂)₃SSnPh₃] (1) was synthesized by PdCl₂ catalyzed reaction between Ph₃SnCl and disodium-1,3-propanedithiolate which in turn was prepared from 1,2-propanedithiol and sodium in refluxing THF. Reaction of 1 with Ru₃(CO)₁₂ in refluxing THF affords the mononuclear complex trans-[Ru(CO)₄(SnPh₃)₂] (2) and the dinuclear complex [Ru₂(CO)₆(μ-κ²-SCH₂CH₂CH₂S)] (3) in 20 and 11% yields, respectively, formed by cleavage of Sn-S bond of the ligand and Ru-Ru bonds of the cluster. Treatment of pymSSnPPh₃ (pymS = pyrimidine-2-thiolate) with Ru₃(CO)₁₂ at 55-60 °C also gives 2 in 38% yield. Both 1 and 2 have been characterized by a combination of spectroscopic data and single crystal X-ray diffraction analysis.     

Coordination chemistry of copper-molybdates with alkoxide ligands: The {Mo4O10(OMe)6} and [Mo2O4{RC(CH2O)3}2] clusters as building blocks

The reactions of the Keplerate super cluster [Mo₁₃₂O₃₇₂(CH₃CO₂)₃₀(H₂O)₇₂]⁴²⁻ with a Cu(II) source and an organonitrogen donor in methanol/DMF solutions yielded a series of bimetallic organic-inorganic oxide hybrid materials, including the molecular species [Cu(phen)₂MoO₄] (1) and [{Cu(terpy)}₂(MoO₄)₂] (2) and a series of materials constructed from the tetranuclear building block {Mo₄O₁₀(OMe)₆}²⁻: the molecular [{Cu₂(phen)₂(O₂CCH₃)₂ (MeOH)}Mo₄O₁₀(OMe)₆] (3), [{Cu(terpy)(O₂CCH₃)}₂Mo₄O₁₀(OMe)₆] (4) and [{Cu(terpy)Cl}₂Mo₄O₁₀(OMe)₆] (5), the one-dimensional phases [{Cu(bpy)(HOMe)₂}Mo₄O₁₀(OMe)₆] (6), [{Cu(bpy)(DMF)₂}Mo₄O₁₀(OMe)₆] (7), [{Cu(bpa)(DMF)₂}Mo₄O₁₀(OMe)₆] (8), [{Cu(phen)(DMF)₂}Mo₄O₁₀(OMe)₆] (9) and [{CuCl(dpa)}₂Mo₄O₁₀(OMe)₆] (10), and the two-dimensional material [{Cu₂(DMF)₂(pdpa)}{Mo₄O₁₀(OMe)₆}₂] (11). When methanol is replaced by the tridentate alkoxide tris-methoxypropane (trisp), the {Mo₂O₄(trisp)₂}²⁻ cluster building block is observed for [Cu(phen)Mo₂O₄(trisp)₂] (12), [Cu(bpa)(DMF)Mo₂O₄(trisp)₂] (13) and [{Cu(bpy)(NO₃)}₂Mo₂O₄(trisp)₂] (14).     

Spectral properties and bio-activity of copper(II) clofibriates, part III: crystal structure of Cu(clofibriate)2(2-pyridylmethanol)2, Cu(clofibriate)2(4-pyridylmethanol)2(H2O) dihydrate, and Cu2(clofibriate)4(N,N-diethylnicotinamide)2

New copper(II) clofibriates (clof, {2-(4-chlorophenoxy)-2-methylpropionic or 2-(4-chlorophenoxy)isobutyric acid}) of composition Cu(clof)₂L₂ (where L=2-pyridylmethanol (2-pymeth) (1), N-methylnicotinamide (Menia) (4), N,N-diethylnicotinamide (Et₂nia) (5), isonicotinamide (isonia) (7) or methyl-3-pyridylcarbamate (mpc) (8)), [Cu(clof)₂(4-pymeth)₂(H₂O)] · 2H₂O (4-pymeth=4-pyridylmethanol) (2 · 2H₂O) and Cu(clof)₂L (where L=4-pymeth (3) or Et₂nia (6)) have been prepared and spectroscopically characterized. All the Cu(clof)₂L₂ compounds seem to possess distorted octahedral copper(II) stereochemistry with differing tetragonal distortions. An X-ray analysis of 1 was carried out and it featured a tetragonal-bipyramidal geometry around the copper(II) atom. X-ray analysis of 2 · 2H₂O featured a square-pyramidal geometry around copper(II) atom. Both the Cu(clof)₂L compounds seem to consist of a binuclear unit of tetracarboxylate type bridging. An X-ray analysis of 6 revealed typical binuclear paddle-wheel type structure, consisting of two copper(II) atoms in square-pyramidal geometry bridged by four carboxylate anions in the xy-plane. All complexes under study were characterized by EPR and electronic spectroscopy. The antimicrobial effects have been tested on various strains of bacteria, yeasts and filamentous fungi.     

Ru2(CO)4(OOCR)2L2 sawhorse-type complexes containing axial 5-(4-pyridyl)-10,15,20-triphenylporphyrin ligands

The thermal reaction of Ru₃(CO)₁₂ with various carboxylic acids (benzoic, 4-hydroxyphenylacetic, ferrocenic, stearic, oleic, 4-(octadecyloxy)benzoic) in refluxing tetrahydrofuran, followed by addition of 5-(4-pyridyl)-10,15,20-triphenylporphyrin (L), gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂L₂ (1: R = -C₆H₅, 2: R = -CH₂-p-C₆H₄OH, 3: R = -C₅H₄FeC₅H₅, 4: R = -(CH₂)₁₆CH₃, 5: R = -(CH₂)₇CHCH(CH₂)₇CH₃, 6: R = -p-C₆H₄O(CH₂)₁₇CH₃). Complexes 1-6 were characterised by IR, NMR, and ESI-MS as well as by elemental analysis. The UV-Vis spectra show the Soret band centred at 417 nm and the Q bands at 515, 550, 590 and 645 nm, respectively.     

Synthetic and mechanistic studies on ruthenium dicarbonyl complexes containing PhP(CH2CH2CH2PCy2)2 (Cyttp) ligand

A synthetic and mechanistic study is reported on ligand substitution and other reactions of six-coordinate ruthenium(II) carbonyl complexes containing tridentate PhP(CH₂CH₂CH₂PCy₂)₂ (Cyttp). Carbonylation of cis-mer-Ru(OSO₂CF₃)₂(CO)(Cyttp) (1) affords [cis-mer-Ru(OSO₂CF₃)(CO)₂(Cyttp)]O₃SCF₃ (2(O₃SCF₃)) and, on longer reaction times, [cis-mer-Ru(solvent)(CO)₂(Cyttp)](O₃SCF₃)₂ (solvent = acetone, THF, methanol). 2(O₃SCF₃) reacts with each of NaF, LiCl, LiBr, NaI, and LiHBEt₃ to yield [cis-mer-RuX(CO)₂(Cyttp)]⁺ (X = F (3), Cl (4), Br (5), I (6), H (7)), isolated as 3-7(BPh₄). These conversions proceed with high stereospecificity to afford only a single isomer of the product that is assigned a structure in which the Ph group of Cyttp points toward the CO trans to X (anti when X = F, Cl, Br, or I; syn when X = H). Treatment of 2(O₃SCF₃) with NaOMe and CO generates the methoxycarbonyl complex [cis-mer-Ru(CO₂Me)(CO)₂(Cyttp)]⁺ (8), whereas addition of excess n-BuLi to 2(O₃SCF₃) in THF under CO affords mer-Ru(CO)₂(Cyttp) (9). The two ¹³C isotopomers [cis-mer-Ru(OSO₂CF₃)(CO)(¹³CO)(Cyttp)]O₃SCF₃ (2′(O₃SCF₃): ¹³CO trans to P_C; 2″(O₃SCF₃): ¹³CO cis to all P donors) were synthesized by appropriate adaptations of known transformations and used in mechanistic studies of reactions with each of LiHBEt₃, NaOMe/CO, and n-BuLi. Whereas LiHBEt₃ reacts with 2′(O₃SCF₃) and 2″(O₃SCF₃) to replace triflate by hydride without any scrambling of the carbonyl ligands, the corresponding reactions of NaOMe-CO are more complex. The methoxide combines with the CO cis to triflate in 2, and the resultant methoxycarbonyl ligand ends up positioned trans to the incoming CO in 8. A mechanism is proposed for this transformation. Finally, treatment of either 2′(O₃SCF₃) or 2″(O₃SCF₃) with an excess of n-BuLi leads to the formation of the same two ruthenium(0) isomers of mer-Ru(CO)(¹³CO)(Cyttp). These products represent, to our knowledge, the first example of a syn-anti pair of isomers of a five-coordinate metal complex.     

Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Syntheses and 1D structures of organic-inorganic hydrid polymers combining M(ClO4)2 (M = Cd, Zn) junctions and the semi-flexible bis-pyridyl ligand 3-pmpmd (N,N′-bis(3-pyridylmethyl)pyromellitic diimide)

Two 1D organic-inorganic coordination polymers, [Cd(3-pmpmd)(CH₃CN)₂(H₂O)₂]_n · 2n(ClO₄)₂ (1) and [Zn(3-pmpmd)_1.5(H₂O)₂]_n · 2n(ClO₄)₂ · nCH₃CN (2), were obtained from M(ClO₄)₂ (M = Cd, Zn) and the semi-flexible 3,3′-N-donor bis-pyridyl ligand 3-pmpmd: 1 has an 1D zigzag framework with 3-pmpmd in the Z_T-mode (anti, trans-) conformation, while 2 has an 1D rod and loop network with 3-pmpmd in both Z_T- and Z_C-mode (anti, cis-) conformations. Results showed that the metal ions could influence the coordination mode of a semi-flexible bis-pyridyl ligand.     

Ruthenium(II/III) mediated transformation of 1,2-bis(2′-pyridylmethyleneimino)benzene (L) to 2-(2′-benzimidazolyl)pyridine (L′H) and its in situ formed complexes with Ru(II): X-ray structure of trans-[Ru(PPh3)2(L′H)2](ClO4)2

A series of ruthenium (II) complexes of formulae trans-[Ru(PPh₃)₂(L′H)₂](ClO₄)₂ (1), [Ru(bpy)(L′H)₂](ClO₄)₂ (2), [Ru(bpy)₂(L′H)](ClO₄)₂ (3), cis-[Ru(DMSO)₂(L′H)₂]Cl₂ (4), and [Ru(L′H)₃](PF₆)₂ (5) (where L′H = 2-(2′-benzimidazolyl)pyridine) have been synthesized by reaction of the appropriate ruthenium precursor with 1,2-bis(2′-pyridylmethyleneimino)benzene (L). The complexes were characterized by elemental analyses, spectroscopic and electrochemical data. All the complexes were found to be diamagnetic and hence metal is in +2 oxidation state. The molecular structure of trans-[Ru(PPh₃)₂(L′H)₂](ClO₄)₂ has been determined by the single crystal X-ray diffraction studies. The molecular structure shows that Ru(II) is at the center of inversion of an octahedron with N₄P₂ coordination sphere. The ligand acts as a bidentate N,N′donor. The electronic spectra of the complexes display intense MLCT bands in the visible region.Cyclic voltammetric studies show quasi-reversible oxidative response at 0.99-1.32 V (vs Ag/AgCl reference electrode) due to Ru(III)/Ru(II) couple.     

1D chain coordination assembly of [Mn4(hmp)6(NO3)2] single-molecule magnets linked by the photochromic [FeNO(CN)5] precursor

The first heterometallic chain cluster {[Mn₄(hmp)₆(NO₃)₂FeNO(CN)₅·4CH₃CN}_n (1) based on the [Mn₄(hmp)₆] SMM has been synthesized. 1 has one-dimensional chain structure: the [Mn₄(hmp)₆] units are linked via CN-groups of nitroprusside anions. Its magnetic and relaxation properties and low temperature IR spectra under light irradiation have been investigated. The ferromagnetic exchange constants have been calculated.     

Rhenium(IV) cyanate complexes: Synthesis, crystal structures and magnetic properties of NBu4[ReBr4(OCN)(DMF)] and (NBu4)2[ReBr(OCN)2(NCO)3]

Two new rhenium(IV) mononuclear compounds of formula NBu₄[ReBr₄(OCN)(DMF)] (1) and (NBu₄)₂[ReBr(OCN)₂(NCO)₃] (2) (NBu₄ = tetrabutylammonium cation, OCN = O-bonded cyanate anion, NCO = N-bonded cyanate anion and DMF = N,N-dimethylformamide) have been synthesized and their crystal structures determined by single-crystal X-ray diffraction. 1 crystallizes in the monoclinic system with the space group P2₁/n, whereas 2 crystallizes in the triclinic one with as space group. In both complexes the rhenium atom is six-coordinated, in 1 by four Br atoms in the equatorial plane, and two trans-oxygen atoms, one of a DMF molecule and another one from a cyanato group, while in 2 by one bromide anion and five cyanate ligands, two of which are O-bonded and three N-bonded, forming a somewhat distorted octahedral surrounding. Magnetic susceptibility measurements on polycrystalline samples of 1 and 2 in the temperature range 1.9-300 K are interpreted in terms of magnetically isolated spin quartets with large values of the zero-field splitting (|2D| is ca. 41.6 and 39.2 cm⁻¹ for 1 and 2, respectively).     

Equilibrium, solid state behavior and reactions of four and five co-ordinate carbonyl stibine complexes of rhodium. Crystal Structures of trans-[Rh(Cl)(CO)(SbPh3)2], trans-[Rh(Cl)(CO)(SbPh3)3] and trans-[Rh(I)2(CH3)(CO)(SbPh3)2]

The crystal structures of the four-coordinate trans-[Rh(Cl)(CO)(SbPh₃)₂] (1) and the five-coordinate trans-[Rh(Cl)(CO)(SbPh₃)₃] (2) are reported, as well as the unexpected oxidative addition product, trans-[Rh(I)₂(CH₃)(CO)(SbPh₃)₂] (3), obtained from the reaction of 2 with CH₃I. The formation constants of the five-coordinate complex were determined in dichloromethane, benzene, diethyl ether, acetone and ethyl acetate as 163±8, 363±10, 744±34, 1043±95 and 1261±96 M⁻¹, respectively. While coordinating solvents facilitate the formation of the five-coordinate complex, the four-coordinate complex could be obtained from diethyl ether due to the favorable low crystallization energy. The tendency of stibine ligands to form five-coordinate rhodium(I) complexes is attributed mainly to electron deficient metal centers in these systems, with smaller contributions by the steric effects. The average effective cone angle for the SbPh₃ ligand in the three crystallographic studies was determined as 139° with individual values ranging from 133 to 145°.     

Versatile coordination behaviour of Ph2AsCH2AsPh2 with Ru(II)

Treatment of ‘RuCl₃ · 3H₂O’ with Ph₂AsCH₂AsPh₂ (dpam) in hot EtOH gives either trans-[RuCl₂(dpam-As,As′)(dpam-As)₂] (1), or cis-[RuCl₂(dpam-As,As′)₂] (2), depending on the mole ratio. On exposure to light, solutions of 2 isomerise to trans-[RuCl₂(dpam-As,As′)₂] (3). Treatment of [RuCl₂(PPh₃)₃] with two equivalents of dpam in CH₂Cl₂ gave a mixture of two products, from which trans-[RuCl₂(PPh₃) (dpam-As,As′)(dpam-As)] (4) was isolated by recrystallisation. The crystal structures of 1-4 are reported. Complexes 1-3 in CH₂Cl₂ undergo electrochemical oxidation to Ru(III), and the Ru(III) form of 2 undergoes isomerisation on the voltammetric timescale to the Ru(III) form of 3.