A new hydrated phase of cobalt(II) oxalate: crystal structure, thermal behavior and magnetic properties of {[Co(μ-ox)(H2O)2] · 2H2O}n

A cobalt-oxalato complex of formula {[Co(μ-ox)(H₂O)₂] · 2H₂O}_n (1) (ox=oxalate dianion) has been prepared and characterized by X-ray diffraction analysis, thermoanalytical techniques and variable temperature susceptibility measurements. The compound crystallizes in the triclinic space group with cell parameters: a=6.627(1), b=8.715(2), c=11.106(2) Å, α=69.86(1), β=83.45(1), γ=72.33(1)°. Its crystal structure consists of crystallization water molecules and one-dimensional linear chains of [Co(H₂O)₂]²⁺ units linked by bis-bidentate oxalato ligands. These structural units are held together by an extensive network of hydrogen bonds. The magnetic properties show the occurrence of antiferromagnetic interactions between the metal centers.     

[Hg(μ-4,4′-bipy)(μ-AcO)(AcO)]n · n/2H2O, one-dimensional double-chain coordination polymer, syntheses, characterization, thermal, fluorescence, porous and structural studies

A new Hg^II coordination polymer with 4,4′-bipyridine and acetate anions, [Hg(μ-4,4′-bipy)(μ-AcO)(AcO)]_n · n/2H₂O (1), has been synthesized, characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and its structure determined by single-crystal X-ray diffraction. The thermal stability of compound 1 was studied by thermal gravimetric (TG) and differential thermal analyses (DTA). The structural studies of compound 1 show that the structure may be considered as a coordination polymer of mercury(II) consisting of linear double chains formed by a bridging 4,4′-bipy ligand and by connecting acetate-bridged centrosymmetric {Hg₂(OAc)₂}²⁺ nodes. Solid-state luminescent spectra of the ligand 4,4′-bipyridine and compound 1 indicate a fluorescent broad emission band with the maximum intensity at ca 468.2 and 446.4 nm upon excitation at 295 nm, respectively. The stability of porous network after removal of guest water molecules is not confirmed by X-ray powder diffraction.     

Spin crossover behavior of a one-dimensional polymeric-chain compound {[Fe(abpt)2(μ-Ni(CN)4)]·xH2O}n (x = 0.5 → 0): Synthesis, spectral, thermal and magnetic properties

A one-dimensional polymeric-chain iron(II)-nickel(II) cyanido-bridged complex of the composition {[Fe(abpt)₂(μ-Ni(CN)₄)]·0.5H₂O}_n (1·0.5H₂O), where abpt = 4-amino-3,5-di-2-pyridyl-4H-1,2,4-triazole, was prepared and characterized by elemental and thermal analyses, FTIR and ⁵⁷Fe Mössbauer spectroscopies, and magnetic measurements. The incomplete spin crossover phenomenon was observed with approximately 12% of the frozen high-spin fraction at low temperatures and with the spin transition critical temperature above room temperature.     

[Cu4(H2O)4(dmapox)2(btc)]n · 10nH2O: The first two-dimensional polymeric copper(II) complex with bridging μ-trans-oxamidate and μ4-1,2,4,5-benzentetracarboxylato ligands: Synthesis, crystal structure and DNA binding studies

A two-dimensional copper(II) polymer with formula of [Cu₄(H₂O)₄(dmapox)₂(btc)]_n · 10nH₂O, where dmapox is the dianion of N,N′-bis[3-(dimethylamino)propyl]oxamide and btc is the tetra-anion of 1,2,4,5-benzenetetracarboxylic acid, was synthesized and characterized by elemental analysis, conductivity measurement, IR and electronic spectral studies. The crystal structure of the complex has been determined by X-ray single-crystal diffraction. The structure consists of crystallized water molecules and neutral two-dimensional copper(II) coordination polymeric networks constructed both by the bis-tridentate μ-trans-dmapox and tetra-monodentate μ₄-btc bridging ligands. Each btc ligand links four trans-dmapox-bridged binuclear copper(II) building blocks [Cu₂(H₂O)₂(trans-dmapox)]²⁺ and each binuclear copper(II) building block attaches to two btc ligands forming an infinite 2D layer which consists of 4+4 grids with dimensions of 13.563(5) × 15.616(5) Å. The environment around the copper(II) atom can be described as a distorted square-pyramid and the Cu?Cu separations through μ-trans-dmapox and μ₄-btc bridging ligands are 5.225 Å (Cu1-Cu1ⁱ), 5.270 Å (Cu2-Cu2ⁱⁱ), 6.115 Å (Cu1-Cu2), 9.047 Å (Cu1-Cu2ⁱⁱⁱ) and 10.968 Å (Cu1-Cu1ⁱⁱⁱ), respectively. Abundant hydrogen bonds among the crystallized, the coordinated water molecules, and the uncoordinated carboxyl oxygen atoms cross-link the two-dimensional layers into an overall three-dimensional channel-like framework. The interaction of the copper(II) polymer with calf thymus DNA (CT-DNA) has been investigated by using absorption, emission spectral and electrochemical techniques. The results indicate that the copper(II) polymer interacts with DNA strongly (K_b = 4.8 × 10⁵ M⁻¹ and K_sv = 1.1 × 10⁴) and the interaction mode between the copper(II) polymer and DNA may be the groove binding. To the best of our knowledge, this is the first report about the crystal structure and DNA-binding studies of a two-dimensional copper(II) polymer bridged both by the trans-oxamidate and btc ligands.     

Synthesis, crystal structures, and spectroscopic characterization of the neutral monomeric tetrahedral [M(Diap)2(OAc)2] · H2O complexes (M = Zn,Cd; Diap = 1,3-diazepane-2-thione; OAc = acetate) with N-H?O and O-H?O intra- and intermolecular hydrogen bonding interactions

The title complexes, [M(Diap)₂(OAc)₂] · H₂O (M = Zn,Cd; Diap = 1,3-diazepane-2-thione; OAc = acetate) with an MO₂S₂ configuration, have been characterized by X-ray crystallography as well as FT-IR, ¹H and ¹³C NMR spectroscopy. In these complexes, the metal atoms lie in a pseudo-tetrahedral environment and are coordinated by the thione sulfur atoms of two neutral 1,3-diazepane-2-thione ligands and one oxygen atom from each of two monodentate acetate anions. In both complexes, there are two intramolecular N-H?O hydrogen bonds, each being between one NH group of a Diap ligand and the uncoordinated O atom of an OAc ligand. The water molecule is also involved in hydrogen bonds, as an acceptor and as a donor twice, linking together three symmetry-related complexes. The Cd complex undergoes a structural phase transition from a monoclinic form at 150 K with Z′ = 2 to a smaller monoclinic cell at room temperature with Z′ = 1 without loss of crystallinity. The Zn complex does not exhibit an equivalent phase transition, and at 150 K is isostructural with the room-temperature form of the Cd complex. All three crystallographically independent molecules found for the Cd complex (two at low temperature and one at room temperature) have essentially the same structure except for small changes in the conformations of the ligands. Tetrahedral coordination with monodentate carboxylate ligands is common for Zn complexes of this kind, but is unusual for Cd complexes, and is the result of the bulky Diap ligands.     

Oxidation of [Ir(η-C5Me5)(C3S5)] [C3S5 = 4,5-disulfanyl-1,3-dithiole-2-thionate(2−)] and X-ray crystal structure of [IrBr(η-C5Me5)(μ-C2S4)IrBr(η-C5Me5)]

[Ir(η⁵-C₅Me₅)(C₃S₅)] [C₃S₅²⁻ = 4,5-disulfanyl-1,3-dithiole-2-thionate(2−)] was prepared by a reaction of [NMe₄]₂[C₃S₅] with [Ir(η⁵- C₅Me₅)Cl₂]₂ in ethanol. It was reacted with bromine to afford a paramagnetic species [IrBr(η⁵-C₅Me₅)(C₃S₅)] with the Ir-Br bond and in the one-electron-oxidized state, and a diamagnetic dinuclear species [IrBr(η⁵-C₅Me₅)(μ-C₂S₄)IrBr(η⁵-C₅Me₅)]. ESR spectra for the one-electron-oxidized species in solution are discussed. The X-ray crystal structural analysis for the latter complex revealed the geometry consisting of dinuclear IrBr(η⁵-C₅Me₅) moieties bridged by the C₂S₄²⁻ ligand.     

Synthesis of (β-phenylethynyl)-gem-diphenyltrifluorocyclotriphosphazene and its reaction with RCpCo(PPh3)2 [R = MeOC(O)]

Reaction of gem-diphenyltetrafluorocyclotriphosphazene with in situ generated lithiated phenylacetylene resulted in the formation of the first example of a gem-diphenyltrifluorophosphazene based alkyne (β-phenylethynyl)-gem-diphenyltrifluorocyclotriphosphazene (NPPh₂)(NPF₂)[NP(F)CCPh] 1. Reaction of this alkyne with η⁵-(MeOC(O)C₅H₄)Co(PPh₃)₂ resulted in the formation of a CpCo stabilized cyclobutadiene complex [η⁵-carbomethoxycyclopentadienyl][η⁴-1,3-bis(gem-diphenyltrifluorocyclotriphosphazenyl)-2,4-diphenylcyclobutadiene]cobalt 2, having two gem-diphenyltrifluorophosphazene moieties trans to each other on the cyclobutadiene ring. The reaction also yielded two structural isomers of the PPh₃ stabilized cobaltacyclopentadiene compounds 3 and 4 having gem diphenyl trifluorophosphazene moieties present in the 2,4 and 2,5 positions of the metallacycle. The reaction in addition yielded a novel spirocyclic phosphazacyclopentadiene compound bound to a CpCo unit in the η⁴-mode 5. All the compounds were characterized by ¹H, ¹³C, ³¹P and ¹⁹F NMR spectroscopy and compounds 2, 3 and 5 were also structurally characterized by X-ray crystallography.     

4′-(4-Pyridyl)-2,2′:6′,2″-terpyridine as ligand in the lead(II) complexes, [Pb(pyterpy)(MeOH)I2] · MeOH and [Pb(pyterpy)(μ-AcO)]2(ClO4)2

Two new lead(II) complexes with the ligand 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine (pyterpy), [Pb(pyterpy)(MeOH)I₂] · MeOH and [Pb(pyterpy)(μ-AcO)]₂(ClO₄)₂, have been synthesized and characterized by CHN elemental analysis, ¹H NMR-, ¹³C NMR-, IR spectroscopy and structurally analyzed by X-ray single-crystal diffraction. The thermal stabilities of these compounds were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). The single crystal X-ray analyses show that the coordination number in these complexes is six with three “pyterpy” N-donor atoms and two or three of the anionic ligands. The arrangement of donor atoms in these complexes suggest a gap or hole in the coordination geometry of the lead atoms, possibly occupied by a stereoactive lone pair of electrons on lead(II) and the coordination sphere is hemidirected. The potentially tetradentate ligand 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine (pyterpy) acts as a tridentate donor to Pb(II). The noncoordinated pyridyl group interacts with hydrogen atoms of adjacent molecules and forms normal hydrogen bonds in [Pb(pyterpy)(MeOH)I₂] · MeOH and weak C-H?N interactions for [Pb(pyterpy)(μ-AcO)]₂(ClO₄)₂, thus extending the monomeric structures into one-dimensional networks.     

Syntheses and crystal structures of the first iridium complexes with m- and p-terphenyl (tp). {[Ir2(p-tp)(cod)2](BF4)2 · 2CH2Cl2}3 and [Ir(m-tp)(η-C5Me5)](BF4)2

Novel two iridium terphenyl complexes were prepared and their structures were characterized crystallographically. The reaction of [Ir(cod)₂]BF₄ with p-terphenyl (p-tp) in CH₂Cl₂ was carried out to afford dinuclear Ir(I) complex {[Ir₂(p-tp)(cod)₂](BF₄)₂ · 2CH₂Cl₂}₃ (cod=1,5-cyclooctadiene) (1 · 2CH₂Cl₂), whereas the reaction of the intermediate [Ir(η⁵-C₅Me₅)(Me₂CO)₃]³⁺ in Me₂CO with m-terphenyl (m-tp) was done to provide mononuclear Ir(III) complex [Ir(m-tp)(η⁵-C₅Me₅)](BF₄)₂ (2). In complex 1 · 2CH₂Cl₂, two Ir atoms are η⁶-coordinated to both sides of terminal benzene rings from the upper and lower sides in the p-tp ligand, while one Ir atom is η⁶-coordinated to one side of the terminal benzene ring in the m-tp ligand in complex 2. Each crystal structure describes the first coordination mode found in metal complexes with the m- and p-tp ligands.     

A family of lanthanide-containing molecular open frameworks with high porosity: [Ln(abdc)(Habdc), nH2O]∞ with Ln = La-Eu and 8 ? n ? 11

Reactions in water between the di-sodium salt of amino terepthalic acid (C₈H₃NO₄Na₂) and a lanthanide chloride lead to a family of 3D-coordination polymers with general chemical formula [Ln(C₈H₃NO₄)(C₈H₄NO₄), O]_∞ where Ln = La-Eu (except Pm) and 8 ? n ? 11. All these compounds are isostructural. High quality single crystals of [Ln(C₈H₃NO₄)(C₈H₄NO₄), nH₂O]_∞ with Ln = La-Sm (except Pm) and 8 ? n ? 11 have been obtained by slow diffusion in agar-agar gels. The crystal structure has been solved for the Nd-containing compound. This compound crystallizes in the cubic system, space group Ia-3 (no. 206) with a = 26.8056(5) Å. The crystal structure can be described as the juxtaposition of large channels with square cross-section.The channels are filled by highly disordered crystallization water molecules. The dehydration of the compounds by freeze-drying is possible and most of the crystallization water molecules can be removed without destruction of the molecular skeleton. The partially dehydrated compounds have general chemical formula [Ln(abdc)(Habdc), 2H₂O]_∞ with Ln = La-Eu except Pm. The porosity of the Nd-containing compound has been estimated by computational methods to 2170 m² g⁻¹. This dehydrated compound reversibly binds water when exposed to wet atmosphere restoring the initial hydrated phase.     

Crystal and molecular structures of {Cu(μ-CCPh)(triphos)}2 [triphos = (PPh2CH2)3CMe]

The binuclear complex {Cu(μ-CCPh)(triphos)}₂ [triphos = (PPh₂CH₂)₃CMe] has been obtained from a reaction between {Cu(CCPh)}_n and triphos. The two copper atoms are bridged unsymmetrically by two CCPh groups, each attached through one carbon only [Cu-C, 2.016(4) Å], the separation between the two coppers being 2.4663(8) Å. Only two of the three phosphorus atoms in each ligand are coordinated to copper [Cu-P(1,2) 2.281, 2.273(1) Å]. The observed structure may be rationalised using a recent theoretical study [C. Mealli, S.S.M.C. Godinho, M.J. Calhorda, Organometallics 20 (2001) 1734] and differs from that assumed for the rationalisation of its luminescence properties [V. Pawlowski, G. Knör, C. Lennartz, A. Vogler, Eur. J. Inorg. Chem. (2005) 3167].     

Succinate bridged dimeric Cu(II) system containing sandwiched non-coordinating succinate dianion: Crystal structure, spectroscopic and thermal studies of [(phen)2Cu(μ-L)Cu(phen)2]L · 12.5H2O (H2L = succinic acid; phen = 1,10-phenanthroline)

A mixed ligand and dimeric Cu^II complex [(phen)₂Cu(μ-L)Cu(phen)₂]L · 12.5H₂O (H₂L = succinic acid) containing bridging succinate moiety and also non-coordinated succinate dianion was prepared from polymeric Cu(II) succinate by nucleophilic reaction with o-phenanthroline (phen) followed by depolymerization. The dimeric product was characterized by crystallographic, spectroscopic and thermoanalytical studies. The complex crystallizes in triclinic crystal system and is composed of succinate bridged [(phen)₂Cu(μ-L)Cu(phen)₂]²⁺ complex cations, non-coordinated succinate anions and hydrogen bonded water molecules. Within the dimeric cationic unit, each of the Cu atoms is octahedrally coordinated by four N atoms of both phen ligands and both O atoms of a carboxylate moiety of the bridging succinate group in chelating form. Through intermolecular π-π stacking interactions, the complex cations form positively charged 2-D layers, between which the non-coordinating succinate anions and water molecules are sandwiched. Both the electronic and EPR studies indicate that the dimeric complex undergoes partial dissociation in solution state to exist in two structural forms. The kinetic and thermodynamic parameters involved in three stage thermal decompositions of the dimeric complex could also be evaluated using Coats-Redfern method.     

Reactivity of electron-deficient triosmium quinoline cluster [Os3(CO)9(μ3-η-C9H6N)(μ-H)] with alkynes

Reactions of the electron-deficient triosmium cluster [Os₃(CO)₉(μ₃-η²-C₉H₆N)(μ-H)] (1) with various alkynes are described. Cluster 1 readily reacts with the activated alkyne dimethyl acetylenedicarboxylate (dmad) upon mild heating (65-70 °C) to give the adduct [Os₃(CO)₉(μ-C₉H₆N)(μ₃-MeO₂CCCHCO₂Me)] (2). In contrast, a similar reaction of 1 with diphenylacetylene affords previously reported compounds [Os₃(CO)₁₀(μ-η²-C₉H₆N)(μ-H)] (3), [Os₃(CO)₉(μ-C₄Ph₄)] (4) and [Os₃(CO)₈{μ₃-C(C₆H₄)C₃Ph₃}(μ-H)] (5) while with 2-butyne gives only the known compound [Os₃(CO)₇(μ-C₄Me₄)(μ₃-C₂Me₂)] (6). The new cluster 2 has been characterized by a combination of spectroscopic data and single crystal X-ray diffraction analysis.     

Variation of the electron population by four units in the cluster series [(η-Cp′)3Mo3S4Co(L)] (L = I, CO, PPh3, NO; n = 0, 1)

The versatility of cuboidal Mo₃S₄Co clusters for the preparation of complexes with different numbers of valence shell electrons (VSE) in the cluster is described. The reaction of the geometrically incomplete cuboidal cluster salt [(η⁵-Cp′)₃Mo₃S₄][pts] (pts = p-toluenesulfonate) with one molar equivalent of [Co₂(CO)₈] afforded almost quantitatively the electroneutral 60 VSE cluster [(η⁵-Cp′)₃Mo₃S₄Co(CO)] (1), which previously has been prepared in low yield by Curtis et al. in autoclave syntheses [M.D. Curtis, U. Riaz, O.J. Curnow, J.W. Kampf, Organometallics 14 (1995) 5337]. Cluster 1 was also obtained in high yield by reaction of [(η⁵-Cp′)₃Mo₃S₄][pts] with [(η⁵-Cp^∗)Co(CO)₂]. Reaction of [(η⁵-Cp′)₃Mo₃S₄][pts] with two molar equivalents of [Co(I)(CO)₃(PPh₃)] led to a complex mixture of products, of which the electron deficient 58 VSE cluster salt [(η⁵-Cp′)₃Mo₃S₄Co(I)][Co(I)₃(thf)] ([2][Co(I)₃(thf)]) was isolated as single crystals. In the crystal structures of 1 and [2][Co(I)₃(thf)], the Co-Mo bond lengths are almost identical, indicating a delocalization of the electron deficiency in [2]⁺. The reduced form of [2]⁺, [(η⁵-Cp′)₃Mo₃S₄Co(I)] (2), was prepared by oxidative substitution of the carbonyl ligand in 1 by I₂. Further reactions of 1 with PPh₃ and NO leading to the 60 and 61 VSE cluster complexes [(η⁵-Cp′)₃Mo₃S₄Co(PPh₃)] (3) and [(η⁵-Cp′)₃Mo₃S₄Co(NO)] (4), respectively, enabled the preparation of Mo₃S₄Co clusters in altogether four different oxidation states.     

Crystal structures, spectral and magnetic properties of cobalt(II) pyridinecarboxylates: A novel polymeric chain in {[{2,6-(MeO)2nic}2(H2O)2Co(μ-H2O)Co(H2O)4(μ-H2O)]{2,6-(MeO)2nic}2 · 6H2O}n

Synthesis and characterization of two new cobalt(II) complexes, namely monomeric [Co(2-MeSnic)₂(H₂O)₄] · 4H₂O (2-MeSnic is 2-methylthionicotinate) and polymeric {[{2,6-(MeO)₂nic}₂(H₂O)₂Co(μ-H₂O)Co(H₂O)₄(μ-H₂O)]{2,6-(MeO)₂nic}₂ · 6H₂O}_n (2,6-(MeO)₂nic is 2,6-dimethoxynicotinate), are reported. The characterizations were based on elemental analysis, infrared and electronic spectra as well as magnetic measurements. Crystal structures of both complexes have been determined. In both of them - ([Co(2-MeSnic)₂(H₂O)₄] · 4H₂O and {[{2,6-(MeO)₂nic}₂(H₂O)₂Co(μ-H₂O)Co(H₂O)₄(μ-H₂O)]{2,6-(MeO)₂nic}₂ · 6H₂O}_n) - the Co^II atom is six-coordinated. In the 2nd complex, there are two nonequivalent Co^II central atoms, involved in forming a linear polymeric chain with alternating cationic and neutral part. One of them is octahedrally coordinated by a carboxyl oxygen atom of 2,6-(MeO)₂nic, two water molecules and the corresponding centrosymmetrically located atoms. The second Co^II atom is also octahedrally coordinated by six water molecules. Both coordination polyhedra are bridged by a water molecule. The charge of the cationic part is compensated for by two independent anionic 2,6-(MeO)₂nic units. The structure is held together by a complicated system of hydrogen bonds.     

Synthesis and electrochemical aspects of group 14 iron complexes of the type (η-C5H5)Fe(L)2ER3, L2 = (CO)2, (Ph2P)2CH2; E = C, Si, Ge, Sn

The dicarbonyl and diphosphine complexes of the type (η⁵-C₅H₅)Fe(L)₂ER₃ (L₂ = (CO)₂ (a), (Ph₂P)₂CH₂ (b); ER₃ = CH₃ (1a/b); SiMe₃ (2a/b), GeMe₃ (3a/b), SnMe₃ (4a/b)) were synthesized and studied electrochemically. Cyclic voltammetric studies on the dicarbonyl complexes 1a-4a revealed one electron irreversible oxidation processes whereas the same processes for the chelating phosphine series 1b-4b were reversible. The E_ox values found for the series 1a-4a were in the narrow range 1.3-1.5 V and in the order Si > Sn ≈ Ge > C; those for 1b-4b (involving replacement of the excellent retrodative π-accepting CO ligands by the superior σ-donor and poorer π-accepting phosphines) have much lower oxidation potentials in the sequence Sn > Si ≈ Ge > C. This latter oxidation potential pattern relates directly to the solution ³¹P NMR chemical shift data illustrating that stronger donation lowers the E_ox for the complexes; however, simple understanding of the trend must await the results of a current DFT analysis of the systems.     

Spectroscopic properties of ironthiosemicarbazone compounds. Structure of [Fe(C7H7N4S)2]·1.25H2O

The reaction of FeCl₃ and HL, where HL=C₇H₈N₄S, pyridine-2-carbaldehyde thiosemicarbazone, at physiological pH values in air gives rise to a powder of composition C₁₄H₁₆Cl_0.3FeN₈O_1.2S₂ which contains iron(II)- and iron(III)-thiosemicarbazone species. This fact confirms the reducing character of the ligand in neutral and basic media. The [Fe(C₇H₇N₄S)₂]·1.25H₂O compound has been isolated. The crystal structure consists of discrete monomeric cationic entities containing low-spin iron(II) ions in a distorted octahedral environment. The metal ion is bonded to one sulfur and two nitrogen atoms of each thiosemicarbazone molecule. The powdered X-band EPR spectra of C₁₄H₁₆Cl_0.3FeN₈O_1.2S₂ show a significant variation with temperature which can be explained considering an ‘exchange narrowing’ phenomenon, in good accordance with the presence of antiferromagnetic interactions. The Mössbauer measurements are in good agreement with the existence of one iron(II) and two iron(III) low-spin species, with relative areas of 69, 17 and 14%, respectively.     

Stoichiometric and catalytic hydrogenation of the [Co2(CO)6(μ2-η2-alkyne)] complexes

The [Co₂(CO)₆(RC₂R′)] complexes (R, R′ = H, Me, Et, Prⁿ) react with molecular hydrogen under mild conditions of temperature and pressure, at low but appreciable rates. The effect of the steric hindrance of the substituents and the strength of the metalcarbon bonds are discussed. The kinetic data measured for [Co₂(CO)₆(HC₂H)], suggest that both H₂-coordination and CO-dissociation are involved in the rate-determining step of the overall hydrogenation process.The catalytic activity of [Co₂(CO)₆(HC₂H)] in the homogeneous hydrogenation of acetylene is described. At low substrate/catalyst ratio the initial hydrogenation rate is equal, within experimental error, to that found for the stoichiometric reaction; on increasing the acetylene concentration, cyclotrimerization to benzene becomes the dominant process. Interestingly C₄ hydrocarbons (mainly butadiene and 1-butene) are produced in measurable yield (?8%). The formation of these products is interpreted as the result of the hydrogenation of the elusive [Co₂(CO)₅(HC₂H)₂] complex, an unstable intermediate in the cyclotrimerization chain.     

Poly(azolyl) chelate chemistry 14.[1] κ-S,S′ vs κ-H,S,S′- H2B(mt)2 (mt=methimazolyl)borate coordination in the complex [W(CO){H2B(mt)2}2]

The reactions of [M(CC₆H₂Me₃-2,4,6)X(CO)₂(L)₂] (M = Mo, W; X = Cl, Br; L = pyridine, 3,5-dimethylpyrazole) with Na[H₂B(mt)₂] (mt = methimazolyl) are metal dependent, providing either the alkylidyne complex [Mo(CC₆H₂Me₃-2,4, 6)(CO)₂{κ³-H,S,S′-H₂B(mt)₂}] or the bis(chelate) complex [W(CO){κ²-S,S′-H₂B(mt)₂}{κ³-H,S,S′-H₂B(mt)₂}], the latter featuring both bi and tridentate coordination modes for the H₂B(mt)₂ ligand.     

Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.