Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Hydrido-derivatives of [Ir4(CO)10(diphosphine)]: X-ray analyses of [Ir4H(CO)9(μ-Ph2PH(CH3)PPh2)] and [Ir4 H(CO)9(μ-Ph2P(CH2)nPPh2)] (n = 2, 3)

Some novel hydrido-anions of general formula [Ir₄H(CO)₉(μ-L-L)]⁻ (L-L = Ph₂PCH(CH₃)PPh₂, Ph₂P(CH₂)₂PPh₂, Ph₂P(CH₂)₃PPh₂ and Ph₂AsCH₂AsPh₂) have been obtained by the reaction of [Ir₄(CO)₁₀(μ-L-L)] with the base 1,8-diazabicyclo[5.4.0]undec-7-ene in wet dichloromethane. According to IR and ¹H, ³¹P and ¹³C NMR data at low temperature, these anionic derivatives display a single conformation in solution: three edge-bridging COs around the triangular basal face and both the hydride and the bidentate ligands located in axial positions relative to this face. The structures of four compounds were established by X-ray diffraction studies, which confirmed the configuration proposed on the basis of spectroscopic data.     

A versatile entry into aqueous niobium chemistry: isolation and structure of the intermediate Nb4(μ2-O)2(μ2-OC2H5)4Cl4(OC2H5)4(HOC2H5)4

The reduction of ethanolic solutions of niobium pentachloride with zinc, followed by treatment with aqueous acids serves as a versatile entry into the aqueous solution chemistry of niobium. From the zinc-reduced solution, the major intermediate, Nb₄(μ₂-O)₂(μ₂-OC₂H₅)₄Cl₄(OC₂H₅)₄(HOC₂H₅)₄, was isolated and the crystal structure determined by X-ray crystallography. The complex crystallizes in the orthorhombic space group Pccn, with Z=4, a=21.0105(9), b=11.0387(5), c=19.1389(8), V=4438.9(3) ų, M_r=1090.19,R₁=0.0327 and wR₂=0.0876. The structure revealed a centrosymmetric tetrameric Nb(IV) complex, consisting of a pair of edge-sharing bi-octahedral Nb₂(μ₂-OC₂H₅)₄Cl₂(OC₂H₅)₂(HOC₂H₅)₂ units that are joined by two axial oxo ligands. The Nb-Nb distance of 2.7458(3) Å is consistent with a single metal-metal bond.     

Ru2(CO)4(OOCR)2(PPh3)2 sawhorse-type complexes containing μ2-η-carboxylato ligands derived from biologically active acids

The thermal reaction of Ru₃(CO)₁₂ with the biologically active acids acetyl salicylic acid (Aspirin), α-methyl-4-(isobutyl)phenylacetic acid (Ibuprofen) and 3α,7α,12α-trihydroxy-5β-cholanic acid (cholic acid) in refluxing tetrahydrofuran, followed by addition of triphenylphosphine, gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂(PPh₃)₂ (1: R = C₆H₄-2-OCOMe, 2: R = CHMe-C₆H₄-4-Buⁱ, 3: C₂₃H₃₉O₃). The single-crystal structural analysis of 1 and 2 reveals a dinuclear Ru₂(CO)₄ sawhorse structure, the diruthenium backbone being bridged by the carboxylato ligands, while the two phosphine ligands occupy the axial positions at the ruthenium atoms. However, chiral carbon atoms in the carboxylic acid undergo racemisation during the thermal reaction.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

A one-dimensional copper (II) coordination polymer [Cu3(ampym)2(μ1,1-N3)4(μ1,3-N3)2(dmf)2]n (ampym = 2-aminopyrimidine) containing both end-on and end-to-end azido bridges

A new polynuclear copper (II) complex, derived from the azido-bridging ligand and 2-aminopyrimidine, has been synthesized and its 3-D structure has been determined by X-ray diffraction methods at two different temperatures. The compound crystallizes in the triclinic system space group, with the central copper atom lying on an inversion centre. The crystal structure is built up by trinuclear units (each of them contains two double end-on azido bridges) linked through two azide ions in an end-to-end (EE) fashion, to yield the polymer chain [Cu₃(ampym)₂(μ_1,1-N₃)₄(μ_1,3-N₃)₂(dmf)₂]_n. Magnetic susceptibility measurement shows a ferromagnetic interaction above 30 K, whereas a weak anti-ferromagnetic interaction prevails in the range of 30-2 K.     

Synthesis and structural characterization of the molecular loop [cis-Mo2(N,N-di-p-anisylformamidinate)2]2(O2C-CHCCH-CO2)2

A new molecular loop composed of two quadruply bonded Mo₂(DAniF)₂ units (DAniF=N,N^′-di-p-anisylformamidinate) linked by two chiral allene-1,3-dicarboxylate anions has been prepared from the reaction of [cis-Mo₂(DAniF)₂(MeCN)₄](BF₄)₂ with the bis(tetraethylammonium) salt of allene-1,3-dicarboxylic acid. This compound, [cis-Mo₂(DAniF)₂]₂(O₂C-CHCCH-CO₂)₂ (1), has been characterized by X-ray crystallography and by ¹H NMR and UV-Vis spectroscopy. The molecule possesses a center of inversion and hence is meso. There is only weak electronic coupling between the two Mo₂ ⁴⁺ units as revealed by electrochemical measurements.     

First crystallographic determination of dichloro-bridged dinuclear rhodium Cp* complex with neutral Me2CO molecules. [Rh2(Cp*)2(μ-Cl)2(Me2CO)2](BF4)2 (Cp* = η-C5Me5)

The single crystals of dichloro-bridged dinuclear Rh-Cp* complex with neutral Me₂CO molecules, [Rh₂(Cp*)₂(μ-Cl)₂(Me₂CO)₂](BF₄)₂ (Cp* = η⁵-C₅Me₅), was isolated and the structure was in first determined crystallographically.     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Molecular structure of tetranuclear [{Mo2O(S2CNEt2)(η-O2CCF3)(μ-N-o-tol)2}2(μ-O)(μ-O2CCF3)2] formed upon addition of trifluoroacetic acid to syn-[MoO(μ-N-o-tol)(S2CNEt2)]2

Addition of trifluoroacetic acid to syn-[MoO(μ-N-o-tol)(S₂CNEt₂)]₂ in chloroform affords tetranuclear [{Mo₂O(S₂CNEt₂)(η¹-O₂CCF₃)(μ-N-o-tol)₂}₂(μ-O)(μ-O₂CCF₃)₂] which has been crystallographically characterised. It consists of four molybdenum(V) centres linked via bridging imido, trifluoroacetate and oxo ligands and results from replacement of a dithiocarbamate by two trifluoroacetate ligands.     

A novel tetranuclear hydrogenphosphate-bridged Cu(II) cluster. Synthesis, structure, spectroscopy and magnetism of [Cu4(dpyam)4(μ4,η-HPO4)2(μ-X)2]X2(H2O)6 (X = Cl, Br)

Two novel tetranuclear compounds with an unprecedented mode of a hydrogenphosphato bridge, [Cu₄(dpyam)₄(μ₄,η³-HPO₄)₂(μ-X)₂]²⁺ (in which dpyam = di-2-pyridylamine and X = Cl (1), Br (2)) have been synthesised and characterised structurally and magnetically. The Cu(II) ions in the structures each display a square-pyramidal geometry, with two tridentate hydrogenphosphato groups bridging four copper atoms in a μ₄,η³ coordination mode which is rarely found in hydrogenphosphate metal compounds. Each (different) pair of Cu(II) ions is additionally bridged by halide ions, with relatively long Cu-X distances (2.551(3)-2.604(3) Å for 1 and 2.707(1)-2.766(2) Å for 2) and subsequently also a small Cu-X-Cu angle (65.7(1)° and 65.1(1)° for 1 and 61.6(1)° and 62.4(1) for 2) and a large Cu-X-Cu angle (95.5(1)° and 96.5(1)° for 1 and 91.1(1)° and 92.6(1)° for 2). Cu?Cu distances in the tetranuclear units varies from 2.802(3) to 5.232(3) Å for 1 and from 2.834(1) to5.233(1) Å in 2. The lattice structures are stabilised by extensive intermolecular hydrogen bonds. The magnetic susceptibility measurements down to 5 K revealed a weak ferromagnetic interaction between the outer pairs of Cu(II) ions which vary from 22 to 46 cm⁻¹ in 1 and 12 to 33 cm⁻¹ in 2 and a moderately strong antiferromagnetic interaction between the inner Cu(II) ions of −79 cm⁻¹ in 1 and −83 cm⁻¹ in 2, via the Cu-O-P-O-Cu pathway.     

A cyclic osmastannyl complex, Os(κ(Sn,P)-SnMe2C6H4PPh2)(κ-S2CNMe2)(CO)(PPh3) derived from the osmastannol complex, Os(SnMe2OH)(κ-S2CNMe2)(CO)(PPh3)2

Treatment of the six-coordinate trimethylstannyl complex, Os(SnMe₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (1) with SnMe₂Cl₂ produces Os(SnMe₂Cl)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (2), which in turn reacts readily with hydroxide ion to give, Os(SnMe₂OH)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (3). The osmastannol complex 3 undergoes a reaction with 2 equivalents of ^tBuLi, in which one of the phenyl rings of a triphenylphosphine ligand is “ortho-stannylated”, without cleavage of the Os-Sn bond, to give the cyclic complex, Os(κ²(Sn,P)-SnMe₂C₆H₄PPh₂)(κ²-S₂CNMe₂)(CO)(PPh₃) (4). This novel cyclic complex is selectively functionalised at the tin atom by reaction with SnMe₂Cl₂ which exchanges one methyl group for chloride giving the diastereomeric mixture, Os(κ²(Sn,P)-SnMeClC₆H₄PPh₂)(κ²-S₂CNMe₂)(CO)(PPh₃) (5a/5b). Crystal structure determination reveals that both diastereomers occur in the unit cell. The mixture, 5a/5b, undergoes reaction with hydroxide ion to give the diastereomeric osmastannol complexes, Os(κ²(Sn,P)-SnMeOHC₆H₄PPh₂)(κ²-S₂CNMe₂)(CO)(PPh₃) (6a/6b) and with sodium borohydride to give the corresponding tin-hydride mixture, Os(κ²(Sn,P)-SnMeHC₆H₄PPh₂)(κ²-S₂CNMe₂)(CO)(PPh₃) (7a/7b). Crystal structure determinations for 2, 4, and 5a/5b have been obtained.     

Reactions of the complexes [Re2(CO)9(η-P-P)] (P-P=Ph2P(CH2)nPPh2, n=1-6) with Me3NO: formation of close-bridged complexes [Re2(CO)8(μ-P-P)] and phosphine oxide complexes [Re2(CO)9{P-P(O)}]

Reactions of [Re₂(CO)₁₀] with Me₃NO and diphosphines [Ph₂P(CH₂)_nPPh₂, n=1-6] yield mixtures of the monodentate-coordinated diphosphine complexes [Re₂(CO)₉(η¹-P-P)] (P-P=Ph₂P(CH₂)_nPPh₂, n=1-6) (yields 5-40%) and bridged dimers [{Re₂(CO)₉}₂(μ-P-P)] (5-50%). These complexes were isolated as either equatorial or axial isomers, or a mixture of two isomers. Reactions of the monodentate complexes with Me₃NO yield close-bridged complexes [Re₂(CO)₈(μ-P-P)] and phosphine oxide complexes [Re₂(CO)₉{P-P(O)}]. The structures of the close-bridged complexes 1 (n=3) and 2 (n=4), were determined by X-ray crystallography. The Re-Re bond in the close-bridged complex with the longest phosphine chain (n=6) is readily cleaved in CDCl₃ to give the complex [{cis-ReCl(CO)₄}₂(μ-dpph)] (3) as the product, the structure of which was also determined by X-ray crystallography.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Sulfide-bridged aggregates from the metalloligand [Pt2(μ-S)2(PPh3)4] and β-diketonate complexes of cobalt(II) and zinc(II)

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a range of zinc(II) and cobalt(II) complexes ML₂, where L is a β-diketonate ligand CH₃COCHCOCH₃, PhCOCHCOPh, CF₃COCHCOTh (Th = 2-thienyl)] permits the synthesis of adducts [Pt₂(μ-S)₂(PPh₃)₄M(diketonate)]⁺, isolated as their salts in moderate yields. The cobalt and zinc acetylacetonate complexes were characterised by single-crystal X-ray diffraction studies, which reveal isomorphous structures, with tetrahedral heterometal centres.     

Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.     

Syntheses and crystal structures of the first iridium complexes with m- and p-terphenyl (tp). {[Ir2(p-tp)(cod)2](BF4)2 · 2CH2Cl2}3 and [Ir(m-tp)(η-C5Me5)](BF4)2

Novel two iridium terphenyl complexes were prepared and their structures were characterized crystallographically. The reaction of [Ir(cod)₂]BF₄ with p-terphenyl (p-tp) in CH₂Cl₂ was carried out to afford dinuclear Ir(I) complex {[Ir₂(p-tp)(cod)₂](BF₄)₂ · 2CH₂Cl₂}₃ (cod=1,5-cyclooctadiene) (1 · 2CH₂Cl₂), whereas the reaction of the intermediate [Ir(η⁵-C₅Me₅)(Me₂CO)₃]³⁺ in Me₂CO with m-terphenyl (m-tp) was done to provide mononuclear Ir(III) complex [Ir(m-tp)(η⁵-C₅Me₅)](BF₄)₂ (2). In complex 1 · 2CH₂Cl₂, two Ir atoms are η⁶-coordinated to both sides of terminal benzene rings from the upper and lower sides in the p-tp ligand, while one Ir atom is η⁶-coordinated to one side of the terminal benzene ring in the m-tp ligand in complex 2. Each crystal structure describes the first coordination mode found in metal complexes with the m- and p-tp ligands.     

Platinum(II) halide complexes of PPh2(CFCF2) and PPh2(CClCF2). The synthesis and crystal structure of [PtI(μ-I){PPh2(CXCF2)}]2, (X = F, Cl); the first crystallographically characterised iodide-bridged platinum(II) phosphine dimers

The reactions of the fluorovinyl-substituted phosphines PPh₂(CFCF₂) and PPh₂(CClCF₂), with K₂PtX₄ (X = Br, I) have been investigated. The resulting complexes have been characterized by a combination of ¹⁹F and ³¹P{¹H} NMR, IR and Raman spectroscopy. The reactions of these phosphines with K₂PtBr₄ yield the monomeric complexes cis-[PtBr₂{PPh₂(CFCF₂)}₂] (1) and trans-[PtBr₂{PPh₂(CClCF₂)}₂] (2), respectively, whilst the reactions with K₂PtI₄ yield both the monomeric species trans-[PtI₂{PPh₂(CXCF₂)}₂], {X = F (3), Cl (4)}, and the dimeric species [PtI(μ-I){PPh₂(CXCF₂)}]₂, {X = F (5), Cl (6)}. The dimers 5 and 6 represent the first crystallographically characterised platinum(II) iodide-bridged phosphine complexes, and both adopt the symmetric-trans structure.