Exploration of antimicrobial and antioxidant potential of newly synthesized 2,3-disubstituted quinazoline-4(3H)-ones

A series of 2-(chloromethyl)-3-(4-methyl-6-oxo-5-[(E)-phenyldiazenyl]-2-thioxo-5,6-dihydropyrimidine-1(2H)-yl)quinazoline-4(3H)-ones 9a-j was synthesized by treating 2-(chloroacetyl)amino benzoic acid with 3-amino-6-methyl-5-[(E)-phenyldiazenyl]-2-thioxo-2,5-dihydropyrimidine-4(3H)-one 8a-j and was screened for in vitro antibacterial activities against a representative panel of Gram-positive and Gram-negative bacteria. The compounds were synthesized in excellent yields and the structures were corroborated on the basis of IR, ¹H NMR, Mass and elemental analysis data. All the synthesized compounds elicited the potent inhibitory action against all the tested bacterial stains. Furthermore, in order to explore the antioxidant potential of newly synthesized compounds, the free radical scavenging activity measurement were performed by the 1,1-diphenyl-2-picryl-hydrazyl (DPPH) assay method. It is revealed from the antioxidant screening results that the compounds 9c and f manifested profound antioxidant potential.     

Tungsten complexes of aromatic and aliphatic thioaldehydes

Reaction of PPN[W(CO)₃(R₂PC₂H₄PR₂)(SH)] (PPN=Ph₃PNPPh₃; R=Me, 1; R=Ph, 2) with aromatic aldehydes in the presence of trifluoroacetic acid gave tungsten complexes of thiobenzaldehydes mer-[W(CO)₃(R₂PC₂H₄PR₂)(η²-SCHR^′)] (R=Me, 3a-3f; R=Ph, 4a-4e) in high yields. Analogous complexes of aliphatic thioaldehydes mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-SCHR^′)] (3g-3l) could only be obtained from the highly electron-rich thiolate complex 1. The structure of 3i (R^′=i-Bu) was determined by X-ray crystallography. In solution the complexes 3 and 4 are in equilibrium with small quantities of their isomers fac-[W(CO)₃(R₂PC₂H₄PR₂)(η²-SCHR^′)]. Reaction of complexes 3 with dimethylsulfate followed by salt metathesis with NH₄PF₆ gave the alkylation products mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-MeSCHR^′)]PF₆ (5a-5l) as mixtures of E and Z isomers. The methylated thioformaldehyde complex mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-MeSCH₂)]PF₆ (5m) was prepared similarly. Nucleophilic addition of hydride (from LiAlH₄) to 5 initially gave thioether complexes mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(MeSCH₂R^′)] (mer-6) which rapidly isomerized to fac-[W(CO)₃(Me₂PC₂H₄PMe₂)(MeSCH₂R^′)] (fac-6).     

Synthesis, characterisation and natural abundance Os NMR spectroscopy of hydride bridged triosmium clusters with chiral diphosphine ligands

Treatment of [Os₃(μ-H)₂(CO)₁₀] with the chiral diphosphines BINAP, tolBINAP [(R)-2,2′-bis(di-4-tolylphosphino)-1,1′-binaphthyl], DIOP [(4R,5R)-(−)-O-isopropenylidene-2,3-dihydroxy-1,4-bis(diphenylphosphino)butane] affords [Os₃(μ-H)₂(CO)₈(μ-L)] (L = BINAP (1), tolBINAP (2), DIOP (4)) in high yield. The X-ray structures for 1, 2 and 4 are reported, and structural and spectroscopic comparisons are made between these clusters and [Os₃(μ-H)₂(CO)₈(μ-L)] (L = dppm (5), dppe (6), dppp (7)) which were synthesised similarly. Compounds 5 to 7 were previously synthesised by hydrogenation of 1,2-[Os₃(CO)₁₀(μ-L)] but the route from [Os₃(μ-H)₂(CO)₁₀] is preferable. The H-bridged Os?Os distances are similar in 1, 2 and 4 indicating that these species are formally unsaturated 46-electron clusters. The P?P distances vary from 4.24 to 4.30 Å in 1 and 2, respectively, to 4.53 Å in 4 and there are related changes in the angles associated with the ligand set around the H-bridged osmium atoms. Introduction of the diphosphine ligands completely suppresses the ability to add CO, to insert acetylene to form a μ-η¹,η²-vinyl compound, and to exchange hydride ligands with styrene-d₈, which are reactions characteristic of [Os₃(μ-H)₂(CO)₁₀]. Clusters 2 and 5-7 were also used to examine the potential of natural abundance ¹⁸⁷Os NMR spectroscopy through techniques based on inverse detection by HMQC, HSQC and HMBC spectroscopy.     

Neighbouring metal induced oxidative addition at the iron centre amongst the iron-arylpyridylphosphine complexes

Complexes of the type (η⁴-BuC₅H₅)Fe(CO)₂(P) (P = PPh₂Py 3, PPhPy₂4, PPy₃5; Py = 2-pyridyl) were satisfactorily prepared. Upon treatment of 3 with M(CO)₃(EtCN)₃ (M = Mo, 6a; W, 6b), the pyridyl N-atom could be coordinated to the metal M, which then eliminates a CO ligand from the Fe-centre and induced an oxidative addition of the endo-C-H of (η⁴-BuC₅H₅). This results in a bridged hydrido heterodimetallic complex [(η⁵-BuC₅H₄)Fe(CO)(μ-P,N-PPh₂Py)(μ-H)M(CO)₄] (M = Mo, 7a, 81%; W, 7b, 76%). The reaction of 4 or 5 with 6a,b did not give the induced oxidative addition, although these complexes contain more than one pyridyl N-atom. The reaction of 4 with M(CO)₄(EtCN)₂ (M = Mo, 9a; W, 9b) produced heterodimetallic complexes [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′-PPhPy₂)M(CO)₄] (M = Mo, 10a, 81%; W, 10b, 83%). Treatment of 5 with 6a,b gave [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′,N″-PPy₃)M(CO)₃] (M = Mo, 12a, 96%; W, 12b, 78%).     

Ruthenium(II) carbonyl chloride complexes containing pyridine-functionalised bidentate N-heterocyclic carbenes: Synthesis, structures, and impact of the carbene ligands on catalytic activities

A series of new ruthenium(II) carbonyl chloride complexes with pyridine-functionalised N-heterocyclic carbenes [Ru(Py-NHC)(CO)₂Cl₂], [Py-NHC = 3-methyl-1-(2-pyridyl)imidazol-2-ylidene, 1 (1a and 1b); 3-methyl-1-(2-picoyl)imidazol-2-ylidene, 2 (2a and 2b); 3-methyl-1-(2-pyridyl)benzimidazolin-2-ylidene, 3 (3b); 3-methyl-1-(2-picoyl)benzimidazolin-2-ylidene, 4 (4a and 4b); 1-methyl-4-(2-pyridyl)-1,2,4-triazoline-5-ylidene, 5 (5a and 5b)] have been prepared by transmetallation from the corresponding silver carbene complexes and characterized by NMR, IR spectroscopy and elemental analysis. In these complexes with bidentate Py-NHC ligands, one CO ligand is trans to the Py ligand. In 1a, 2a, 4a, and 5a, the NHC ligand is trans to the other CO ligand, thus leaving the two Cl⁻ ligands trans to each other. In 1b, 2b, 3b, 4b, and 5b, the NHC ligands are trans to one Cl⁻ ligand, and the two Cl⁻ ligands are cis to each other. The structures for 1b, 2b, 3b and 4b have been determined by single-crystal X-ray diffraction. These complexes are efficient catalysts in the transfer hydrogenation of acetophenone and their catalytic activities are found to be influenced by electronic effect of the N-heterocyclic carbene ligands.     

A family of titanium (IV) alkoxo complexes with N,O and O,O chelating ligands. Crystal structure of [Ti(O-i-Pr)2{2-(−)-menthoxo-pyridine}2]

In view of the wide applicability and versatility of titanium based Lewis acids in selective organic synthesis including asymmetric synthesis, we have synthesized a family of mono and polyatomic titanium derivatives. The polymetallic complexes prepared are bridged by pyridimine, quinone and triazine based ligands. The synthesis of [{Ti(O-i-Pr)₃(Oddbf)}₂] (1), [Ti(O-i-Pr)₂(Oddbf)₂] (2), [{Ti(O-i-Pr)₂(Oddbf)(OMent)}₂] (3) (ddbfO = 2,3-dihydro-2,2-dimethyl-benzofuranoxo; MentO = (1R,2S,5R)-(−)-menthoxo), [{Ti(O-i-Pr)₃(OMenpy)}₂] (4), [Ti(O-i-Pr)₂(OMenpy)₂] (5) (MenpyO = (1S,2S,5R)-(−)-menthoxo-pyridine); [{(Ti(OR)₃)₂L}_n] (RO = isopropoxo, (1R,2S,5R)-(−)-menthoxo) (6-11) and [{(Ti(O-i-Pr)₃)₃L}_n] (12) was accomplished from a Lewis acid such as Ti(O-i-Pr)₄, [{Ti(O-i-Pr)₃(OMent)}₂] or [Ti(OMent)₄] and chelating ligands (ddbfOH = 2,3-dihydro-2,2-dimethyl-benzofuranol; MenpyOH = (1R,2S,5R)-(−)-5-methyl-2-isopropyl-1-(2′-pyridinyl)cyclohexan-1-ol; LH₂ = 4,6-dihydroxy-2,5-diphenyl-pyrimidine, 2,4-dihydroxy-5,6-dimethyl-pyrimidine, 5,8-dihydroxy-1,4-napthoquinone, 2,5-dihydroxy-1,4-benzoquinone and LH₃ = cyanuric acid) that provide a rigid framework for the metal centre. The molecular structure of 5 has been determined by single crystal X-ray diffraction studies.     

Synthesis of iron thienyl complexes

Dimetallation of thiophene (TH₂), bithiophene (BTH₂) and 3,6-dimethyl[3,2-b]thienothiophene (TTH₂) using a slight excess of butyl lithium, followed by the addition of [FeCp(CO)₂I], resulted in the formation of [2,5-{FeCp(CO)₂}₂T], 1 and [2-{FeCp(CO)₂}T]. The analogous reaction with bithiophene as precursor afforded similar products [2,2′-{FeCp(CO)₂}₂BT] 2 and [2-{FeCp(CO)₂}BTH] 3. In addition to the expected mono- ([2-{FeCp(CO)₂}-TTH] 4) and binuclear ([2,2′-{FeCp(CO)₂}₂-TT] 5) products, dimetallation of 3,6-dimethyl[3,2-b]thienothiophene and the subsequent reaction with [FeCp(CO)₂I] yielded carbonyl inserted mono-([2-{FeCp(CO)₂}C(O)-{TT}₂H] 6) and binuclear ([2-{FeCp(CO)₂}C(O)-{TT}₂-2′-{FeCp(CO)₂}] 7) carbon-carbon coupled products. The precursor [2,7-{SnMe₃}₂-TT] (8) was prepared and reacted with [FeCp(CO)(PEt₃)I] in the presence of a palladium catalyst to afford [2-{FeCp(CO)(PEt₃)}C(O)-{TT}₂-2′-{SnMe₃}] 10.     

Synthesis of cyclopentadienyl ruthenium complexes containing 5-membered N-heterocyclic thiolates

Mononuclear ruthenium-thiolate complexes of structural type CpRu(PPh₃)₂SR (1) [R = 2-imidazolyl (a), 1-methylimidazolyl (b), 5-methyl-1,3,5-thiadiazolyl (c) and 5-methyl-4H-1,2,4-triazolyl (d)] are accessible from the reaction of CpRu(PPh₃)₂Cl with the corresponding thiolate anions. Reaction of CpRu(PPh₃)₂Cl with the heterocyclic-thiolate anions in the presence of the bisphosphine ligands affords CpRu(P-P)SR [P-P = bis(diphenylphosphino)methane; dppm (2), bis(diphenylphosphino)ethane; dppe (3)]. If CO gas was bubbled through a THF solution of 1b, the complex CpRu(PPh₃)(CO)S(C₄N₂H₅) (4b) is produced. These ruthenium-heterocyclic thiolate complexes have been characterized by elemental analysis, spectroscopy (IR, ¹H, ³¹P{¹H} NMR and MS) and cyclic voltammetry for some samples. The solid-state structures of 3a and 3b are determined by single-crystal X-ray structure analysis.     

Addition compounds of MoO2Cl2 with chiral sulfoxides. First molecular structures of dioxomolybdenum complexes bearing chiral non-racemic sulfoxide as ligand

MoO₂Cl₂(L)₂ [L = (R)-(+)-methyl-p-tolylsulfoxide (R-MeTolSO) (1), methyl-p-tolylsulfoxide (MeTolSO) (2), 2-benzenesulfinyl-1,1-diphenylethanol (BSDPE) (3), 1-benzenesulfinyl-2-methyl-2-propanol (BSMP) (4), benzenesulfinylmethyl 4-methylphenyl ketone (BSMMPK) (5)], and MoO₂Cl₂(L) [L = BSDPE (6), BSMP (7), BSMMPK (8), (S,S)-bis(p-tolylsulfinyl)methane (S,S-TolSOCH₂SOTol) (9), bis(methylsulfinyl)methane (MeSOCH₂SOMe) (10), bis(phenylsulfinyl)methane (PhSOCH₂SOPh) (11)] have been synthesized by reacting a solution of MoO₂Cl₂(H₂O)₂ in diethyl ether with the corresponding ligand. The crystal and molecular structures of 1, 2, and 9 have been established by X-ray diffraction analysis. The ability of 1 and 9 as catalysts for the enantioselective reduction of sulfoxides to sulphides and the oxidation of sulphides to sulfoxides has been examined.     

Diferrocenes containing thiadiazole connectivities

2,5-Diferrocenyl-1,3,4-thiadiazole, 2,5-Fc₂-^cC₂N₂S, (3) has been synthesized by a two-fold Negishi ferrocenylation of dibromothiadiazole (1) with FcZnCl (2) (Fc = Fe(η⁵-C₅H₄)(η⁵-C₅H₅)) in presence of [Pd(Ph₃P)₄] as catalyst. Additional spacer units between the ferrocenyls and the ^cC₂N₂S core could be introduced by using the Sonogashira C,C cross-coupling protocol. Reaction of 2,5-Br₂-^cC₂N₂S (1) or 2,5-(C₆H₄-4′-I)₂-^cC₂N₂S (6) with FcCCH (4) using [PdCl₂(Ph₃P)₂] and [CuI] as catalyst produced the appropriate organometallics 2,5-(FcCC)₂-^cC₂N₂S (5) or 2,5-(C₆H₄-4′-CCFc)₂-^cC₂N₂S (7). The electronic and structural properties of 3, 5, and 7 were investigated with UV-Vis spectroscopy and single crystal X-ray diffraction (3). Complex 3 adopts a solid state structure with none of the ferrocenyl substituents being coplanar with the thiadiazole ring. Cyclic, square wave, linear sweep voltammetry and in-situ NIR spectro-electrochemistry highlight the electrochemical properties of 3. In dichloromethane (0.1 mol L⁻¹ [N(ⁿBu)₄][B(C₆F₅)₄]), compound 3 displays two well resolved electrochemical reversible one-electron events with formal reduction potentials of 0.192 and 0.338 V versus FcH/FcH⁺. In contrast, in presence of [N(ⁿBu)₄][PF₆], the thiadiazoles 3 (E⁰ = 0.22 V), 5 (E⁰ = 0.18 V) and 7 (E⁰ = 0.09 V) show simultaneously oxidation of the two ferrocenyl termini versus FcH/FcH⁺. Spectro-electrochemical studies, performed in a dichloromethane solution of 0.2 mol L⁻¹ [N(ⁿBu)₄][B(C₆F₅)₄], also show that 3 can successively be oxidized via 3⁺ to 3²⁺. A weak IVCT absorption (ε ca. 300 L mol⁻¹ cm⁻¹) at 1560 nm was found and is consistent with appreciable interactions between neutral ferrocenyl and positively charged ferrocenium mixed valent intermediates. Mixed-valent compound 3⁺ corresponds to a class II molecule according to Robin and Day.     

Coordination behavior of phosphino-phosphaferrocenes: monodentate versus bidentate coordination to divalent palladium

Two novel phosphino-phosphaferrocenes [η⁵-C₅H₄(CH₂)_nPPh₂]Fe(η⁵-PC₄H₂-2,5-Cy₂) (PP1: n=1; PP2: n=2) have been designed and prepared in order to clarify weak chelate effect in the previously reported (η⁵-C₅H₄CH₂PPh₂)Fe[η⁵-PC₄H₂-2,5-((-)-menthyl)₂] (1). ³¹P NMR studies of reactions of PP1 with PdCl₂(cod) (6) revealed that PP1 showed stronger tendency to coordinate to the Pd^II center in bidentate fashion compared to 1. On the other hand, chelate effect in PP2 was negligibly weak and a reaction of PP2 with 6 in a PP2/6 = 2/1 molar ratio gave a complex PdCl₂(PP2)₂ (10) cleanly in which PP2 coordinated to the palladium center at the PPh₂ moiety as a monodentate ligand. X-ray crystal structure studies of chelate complexes PdCl₂(PP1) (7) and PdCl₂(PP2) (9) showed that 9 had deviations from an idealized geometry in the square planar complex which could be attributed to a larger chelate ring of PP2, while PP1 in 7 constructed nearly ideal geometry for the square planar complex.From comparison of the coordination behavior between 1, PP1, and PP2, it is concluded that steric bulk of (-)-menthyl groups in 1 is the main factor of the weak chelate coordination of 1.     

Syntheses and structures of vinyl and aryl derivatives of carbonyl halide iron complexes

cis,trans-Fe(CO)₂(PMe₃)₂(p-Y-C₆H₄)X [X=Br, Y=H (4a), MeO (4b), Cl (4c), F (4d), Me (4e); X=I, Y=H (5); X=Cl, Y=H (6)] and cis,trans-Fe(CO)₂(PMe₃)₂(σ-CHCH₂)X [X=Br (7); X=I (8); X=Cl (9)] are prepared by reacting dihalide complexes cis,trans,cis- Fe(CO)₂(PMe₃)₂X₂ [X=Br (1), X=I (2), X=Cl (3)] with Grignard reagents p-Y-C₆H₄-MgBr (Y=H, OMe, Cl, F, Me) or CH₂CH-MgBr and with lithium reagents PhLi, CH₂CH-Li. With both reagents, the reaction proceeds following two parallel pathways: one is the metallation reaction which yields alkyl derivatives, the other affords 17 electron complexes [Fe(CO)₂(PMe₃)₂X] via monoelectron reductive elimination. The influence of the halides and organometallic reagents on the yield of the metallation reaction is discussed. The solution structure of the complexes is assigned on the basis of IR and ¹H, ¹³C, ¹⁹F, ³¹P NMR spectra. The solid state structure of complexes 4a, 5 and 6 is determined by single crystal X-ray diffractometric methods.     

Rhenium tricarbonyl complexes of 1-benzyl-4-(5-bipyridyl)-1H-1,2,3-triazoles

Copper(I) catalyzed [3+2] cycloaddition reactions between 5-ethynylbipyridine and benzyl, p-methylbenzyl, or m-bromobenzyl azides yields the corresponding 1-benzyl-4-(5-bipyridyl)-1H-1,2,3-triazoles 1-3. Reaction between 1-3 and [NEt₄]₂[Re(CO)₃Br₃] yields the [1-benzyl-4-(5-bipyridyl)-1H-1,2,3-triazole]Re(CO)₃Br complexes 4-6. The Re(CO)₃Br complexes of 5- and 6-ethynylbipyridine complexes (7-8) are prepared in a similar fashion. Cycloaddition reactions between 7 and benzyl azide yields mixtures of 4 and unreacted starting material.     

Mononuclear and dinuclear bromo bridged iridium(I) complexes with N-allyl substituted imidazolin-2-ylidene ligands

The reaction of 1-methyl-3-(2-propenyl)imidazolium bromide (1) or 1,3-bis(2-propenyl)-imidazolium bromide (2) with [Ir(μ-OMe)(cod)]₂ afforded the five coordinated iridium(I) carbene complexes [IrBr(L)(cod)] (3) (L=1-methyl-3-(2-propenyl)imidazolin-2-ylidene) and (4) (L=1,3-bis(2-propenyl)imidazolin-2-ylidene). The reaction proceeds via an in situ deprotonation of the imidazolium salt. Molecular structure determinations on 3 and 4 confirmed the coordination of the carbene ligands via the carbene carbon atom and one allyl group in both complexes. Treatment of complex 3 with an excess of AgBF₄ gave the dinuclear bromo bridged complex [(Ir(μ-Br)(L)(cod)]₂BF₄ (5) (L=1-methyl-3-(2-propenyl)imidazolin-2-ylidene). The reaction of complex 4 with an excess of AgBF₄ led to the mononuclear complex [Ir(L)(cod)]BF₄ (6) (L=1,3-bis(2-propenyl)imidazolin-2-ylidene) where both N-allyl substituents are coordinated to the iridium(I) center.     

Two dimeric lignans with an unusual α,β-unsaturated ketone motif from Zanthoxylum podocarpum and their inhibitory effects on nitric oxide production

Two new dimeric lignans, zanthpodocarpins A (1) and B (2), and five known lignans, eudesmin (3), (1R,2R,5R,6S)-2-(3,4-dimethoxyphenyl)-6-(3,4-dihydroxyphenyl)-3,7-dioxabicyclo[3.3.0]octane (4), dimethoxysamin (5), rel-(1R,5R,6S)-6-(4-hydroxy-3-methoxyphenyl)-3,7-dioxabicyclo[3.3.0]octan-2-one (6), and magnone A (7), were isolated from the barks of Zanthoxylum podocarpum. Their structures were identified by using spectroscopic methods. Compounds 1 and 2 are rare dilignans bearing an unusual α,β-unsaturated ketone group from a natural source. Bioassay showed that compounds 1 and 2 could inhibit nitric oxide (NO) production in LPS stimulated RAW 264.7 cells with IC₅₀ values of 5.31 μM and 12.15 μM, respectively.     

Divanadium(V) complexes with 4-R-benzoic acid (1-methyl-3-oxo-butylidene)-hydrazides: Syntheses, structures and properties

In acetonitrile, reactions of bis(acetylacetonato)oxidovanadium(IV) ([VO(acac)₂]) with 4-R-benzoylhydrazine in 1:1 mole ratio provide coordinatively symmetrical complexes (1-5) of the {OV(μ-O)VO}⁴⁺ motif in 40-47% yields. On the other hand, in methanol the same reactants provide complexes (6-10) containing the {OV(μ-OMe)₂VO}⁴⁺ core in 37-50% yields. In both series of complexes, the ligand is the O,N,O-donor deprotonated Schiff base system 4-R-benzoic acid (1-methyl-3-oxo-butylidene)-hydrazide formed by template condensation of acac⁻ with 4-R-benzoylhydrazine (R = H, Cl, OMe, NO₂ and NMe₂). All the complexes have been characterized by elemental analysis, magnetic and spectroscopic (IR, UV-Vis and NMR) measurements. Molecular structures of three representative complexes (4, 6 and 7) have been determined by X-ray crystallography. In each complex, the dianionic planar ligand is coordinated to the metal centre via the enolate-O, the imine-N and the O-atom of the deprotonated amide functionality. Cyclic voltammetric measurements in dichloromethane revealed that complexes 1-5 are redox inactive, while complexes 6-10 display a metal centred reduction in the potential range −0.06 to 0.0.32 V (versus Ag/AgCl).     

A new approach to coordination chemistry involving phosphorus-selenium based ligands. Ring opening, deselenation and phosphorus-phosphorus coupling of Woollins’ Reagent

The facile reaction of [CpCr(CO)₃]₂ (1) with an equivalent of 2,4-bis(phenyl)-1,3-diselenadiphosphetane-2,4-diselenide or Woollins’ Reagent (WR) at ambient temperature gave mainly [CpCr(CO)₂]₂Se (3) as the main product. A similar reaction with an excess of 1 gave 3 (58%) and trans-[CpCr(CO)₂(SePPh)]₂ (5, 25%). However reaction with an equivalent of the triply bonded congener Cp₂Cr₂(CO)₄ (2) at 60 °C took 3 h to complete and led to the isolation of trans-[CpCr(CO)₂(SePPh)]₂ (5, 3%), CpCr(CO)₂(SeP(H)Ph) (4, 18%) and [CpCr(Se₂P(O)Ph)]₂ (6, 2%). The ring-opening reaction of WR via an initial homolytic P-Se bond cleavage by CpCr(CO)_n· (n = 2 (2A) or 3 (1A)) depicts a new approach to coordination chemistry involving P-Se based ligands. A mechanistic pathway was proposed according to the evidences obtained from thermolysis, NMR and mass spectra studies. All the products of 4, 5 and 6 have been structurally characterized by single-crystal X-ray diffraction analysis.     

Gold acyls and imidoyls prepared from anionic Fischer-type carbene complexes

Reaction of [(CO)₅WC(O)Ph]Li or [(CO)₅WC(O)Ph]NBu₄ with Ph₃PAuCl affords acyl complexes of gold. In the latter conversion, both the crystalline products [(CO)₅WCl]NBu₄ (2) and Ph₃PAuC(O)Ph (3) have been isolated and fully characterised. Similarly, imidoyl gold compounds (4-8) result from deprotonated aminocarbene complexes, [(CO)₅MC(NR²)R¹]Li (M = Cr, W; R¹ = Ph, Me; R² = H, Me) and Ph₃PAuCl. Crystal and molecular structure determinations of dinuclear [Ph₃PAuC(NH)Ph] · Cr(CO)₅ (6) show N-coordination of the chromium carbonyl unit that selectively affords a Z-isomer.     

Synthesis and characterization of new AMTTO-imine-ligands and their silver(I) complexes: crystal structures of TAMTTO, [Ag2(TAMMTO)4](NO3)2 · 4MeOH, [Ag(TAMTTO)(PPh3)2]NO3 · 1.5THF, [Ag(FAMTTO)(PPh3)2]NO3

Reaction of 4-amino-6-methyl-1,2,4-triazin-thione-5-one (AMTTO, 1) with 2-thiophenecarboxaldehyde and 2-furaldehyde led to the corresponding iminic compounds 6-methyl-4-[thiophene-2-yl-methylene-amino]-3-thioxo-[1,2,4]-triazin-3,4-dihydro(2H)-5-one (TAMTTO, 2) and 4-[furan-2-yl-methylene-amino]-6-methyl-3-thioxo-[1,2,4]-triazin-3,4-dihydro(2H)-5-one (FAMTTO, 3). Treatment of 2 with AgNO₃ gave the complex [Ag₂(TAMMTO)₄](NO₃)₂ · 4MeOH (4) and of 2 and 3 with [Ag(PPh₃)₂]NO₃ gave the complexes [Ag(TAMTTO)(PPh₃)₂]NO₃ · 1.5THF (5) and [Ag(FAMTTO)(PPh₃)₂]NO₃ (6), respectively. All the compounds have been characterized by elemental analyses, IR spectroscopy and mass spectrometry. Compound 2 and all the complexes have been characterized by X-ray diffraction studies, respectively. In addition, 5 and 6 have been characterized by ³¹P NMR spectroscopy. Crystal data for 2 at −80 °C: monoclinic, space group C2/c, a=2319.6(2), b=609.8(1), c=1673.6(2) pm, β=106.14(1)°, Z=8, R₁=0.0523; for 4 at −80 °C: triclinic, space group , a=877.6(1), b=1085.2(1), c=1557.7(2) pm, α=77.14(1)°, β=80.87(1)°, γ=78.18(1)°, Z=1, R₁=0.0407; for 5 at 20 °C: triclinic, space group , a=1151.1(2), b=1225.1(2), c=1887.4(3) pm, α=78.04(1)°, β=86.20(1)°, γ=76.03(1)°, Z=2, R₁=0.0662; for 6 at −80 °C: triclinic, space group , a=1189.7(2), b=1387.8(2), c=1410.9(2) pm, α=94.74(2)°, β=95.12(2)°, γ=112.41(2)°, Z=2, R₁=0.0511.     

Five-coordinate zinc(II) complexes with optically active Schiff bases derived from (1R,2R)-(−)cyclohexanediamine: X-ray structure and CP MAS NMR characterization of [cyclohexylenebis(5-chlorosalicylideneiminato)zinc(II)pyridine] and [cyclohexylenebis(5-bromosalicylideneiminato)zinc(II)pyridine]

Schiff bases obtained from (1R,2R)-(−)-cyclohexanediamine and 5-chloro- (1) or 5-bromosalicylaldehyde (2) are used as ligands for Zn(II) resulting in [(1R,2R)-cyclohexylenebis(5-chlorosalicylideneiminato)]zinc(II) (1a) and (1R,2R)-[cyclohexylenebis-(5-bromosalicylideneiminato)]zinc(II) (2a). In the presence of pyridine, 1a and 2a turned out into (1R,2R)-[cyclohexylenebis(5-chlorosalicylideneiminato)pyridine]zinc(II) (1b) and (1R,2R)-[cyclohexylenebis(5-bromosalicylideneiminato)pyridine]zinc(II) (2b). Coordination sphere of Zn(II) atoms in both pyridine adducts is a slightly distorted square pyramid, with N₂O₂ chromophore units and axially bonded pyridine as it is evident from single crystal X-ray analyzes of 1b and 2b. The asymmetric unit of 1b and 2b contains two molecules of complexes. The observed distances of Zn-O in both molecules indicate the rigidity of the tetradentate ligand as a main factor influencing the geometry of coordination sphere. Obtained complexes were characterized by ¹H NMR in solution and ¹³C CP MAS NMR. NOE differential experiments revealed significant steric interactions between C(6)-H in the phenyl ring, cyclohexyl C(1)-H and imine hydrogen. Significant coordination shifts of carbons in the closest proximity to the coordination center were noted as well.