A versatile entry into aqueous niobium chemistry: isolation and structure of the intermediate Nb4(μ2-O)2(μ2-OC2H5)4Cl4(OC2H5)4(HOC2H5)4

The reduction of ethanolic solutions of niobium pentachloride with zinc, followed by treatment with aqueous acids serves as a versatile entry into the aqueous solution chemistry of niobium. From the zinc-reduced solution, the major intermediate, Nb₄(μ₂-O)₂(μ₂-OC₂H₅)₄Cl₄(OC₂H₅)₄(HOC₂H₅)₄, was isolated and the crystal structure determined by X-ray crystallography. The complex crystallizes in the orthorhombic space group Pccn, with Z=4, a=21.0105(9), b=11.0387(5), c=19.1389(8), V=4438.9(3) ų, M_r=1090.19,R₁=0.0327 and wR₂=0.0876. The structure revealed a centrosymmetric tetrameric Nb(IV) complex, consisting of a pair of edge-sharing bi-octahedral Nb₂(μ₂-OC₂H₅)₄Cl₂(OC₂H₅)₂(HOC₂H₅)₂ units that are joined by two axial oxo ligands. The Nb-Nb distance of 2.7458(3) Å is consistent with a single metal-metal bond.     

Ethanol catalyzed synthesis of titanocene aryl carboxylate complexes and crystal structure of (η-C5H5)2Ti(2-OH-5-S-O2CC6H3)2

A method for the synthesis of titanocene (IV) aryl carboxylate complexes is presented in this paper. It is based on the fact that alcohol can catalyze the reaction between Cp₂TiCl₂ and aryl carboxylate ligands in the presence of sodium hydroxide (NaOH). The effects of the catalyst on the reaction system were studied and the possible reaction mechanism was proposed. This method was used to prepare a series of titanocene (IV) aryl carboxylate complexes and a macrocyclic titanocene (5,5′-dithiodisalicylato titanocene), whose structure was determined by X-ray diffraction analysis.     

Synthesis, characterization and crystal structure of the bimetallic cyano-bridged [(η-C5H5)(PPh3)2Ru(μ-CN)Ru(PPh3)2(η-C5H5)][PF6]

The bimetallic cyano-bridged [(η⁵-C₅H₅)(PPh₃)₂Ru(μ-CN)Ru(PPh₃)₂(η⁵-C₅H₅)][PF₆] (1) was prepared by reaction of [(η⁵-C₅H₅)(PPh₃)₂RuCl] with N,N′-bis(cyanomethyl)ethylenediamine. The single crystal structure determined by X-ray diffraction showed crystallization on the triclinic P1 space group with a perfect alignment of the cyanide bridges. This accentric crystallization was explored having in view the NLO properties at the macroscopic level, determined by the Kurtz Powder technique. Besides the very low efficiency values for the second harmonic generation, the value obtained for the bimetallic complex 1 showed to be higher than one of the parent complex [(η⁵-C₅H₅)(PPh₃)₂RuCN] (2).     

Reaction of cyanamide and their derivatives with (η-C5H5)Mn(CO)3 and (η-C5H4CH3)Mn(CO)3

The reaction of cyanamide and its derivatives with the (η⁵-C₅H₅)Mn(CO)₂(THF) and (η⁵-C₅H₄CH₃)Mn(CO)₂(THF) complexes affords the cyanamide substituted complexes of types (η⁵-C₅H₅)Mn(CO)₂(NCN(R′)(R″)) (2a-d) and (η⁵-C₅H₄CH₃)Mn(CO)₂(NCN(R′)(R″)) (3a-e). All complexes were characterized by spectroscopy (¹H, ¹³C NMR, IR), elemental and mass spectroscopy analysis. Complex 2b (η⁵-C₅H₅)Mn(CO)₂(NCN(CH₃)₂) was additionally examined by single crystal X-ray structure determination.     

Reduction chemistry of the mixed ligand metallocene [(C5Me5)(C8H8)U]2(μ-C8H8) with bipyridines

The U⁴⁺ cyclooctatetraenyl complex, [(C₅Me₅)(C₈H₈)U]₂(μ-C₈H₈), 1, reacts with two equiv of 4,4′-dimethyl-2,2′-bipyridine (Me₂bipy) and 2 equiv of 2,2′-bipyridine (bipy) to form 2 equiv of (η⁵-C₅Me₅)(η⁸-C₈H₈)U(Me₂bipy-κ²N,N′) and (η⁵-C₅Me₅)(η⁸-C₈H₈)U(bipy-κ²N,N′), respectively. X-ray crystallography, infrared spectroscopy, and density functional theory calculations indicate that the products are best described as U⁴⁺ complexes of bipyridyl radical anions. Hence, only one of the (C₈H₈)²⁻ ligands in 1 acts as a reductant and delivers 2 electrons per equiv of 1. Since the reduction potentials of uncomplexed (C₈H₈)²⁻, Me₂bipy, and bipy are −1.86, −2.15, and −2.10 V vs SCE, respectively, it is likely that prior coordination of the bipyridine reagents enhances the electron transfer.     

Oxidation of [Ir(η-C5Me5)(C8H4S8)] and crystal structures of [IrI(η-C5Me5)(C8H4S8)](I3) and [IrI(η-C5Me5)(C8H4S8)](I3)1/2(I7)1/2

[Ir(η⁵-C₅Me₅)(C₈H₄S₈)] (1) [ = 2-{(4,5-ethylenedithio)-1,3-dithiole-2-ylidene}-1,3-dithiole-4,5-dithionate(2−)] was reacted with iodine in dichloromethane to afford one-electron- and two-electron-oxidized species [IrI(η⁵-C₅Me₅)(C₈H₄S₈)] (2), [IrI(η⁵-C₅Me₅)(C₈H₄S₈)](I₃) (3) and [IrI(η⁵-C₅Me₅)(C₈H₄S₈)](I₅) (4). The oxidized species exhibit electrical conductivities of (1.1-5.0) × 10⁻⁶ S cm⁻¹ measured for compacted pellets at room temperature. The X-ray crystal structures of the two-electron-oxidized complexes 3 and 4 revealed the Ir-I bonds for both of them and the presence of for 3 and ions for 4 as the counter anions. They have many S-S and S-I non-bonding contacts to form two-dimensional molecular interaction sheets in the solid state.     

Actinide complexes with the Kläui tripodal oxygen ligand - crystal structure of [{η-C5H5(CH2C(CH3)3)}Co{P(O)(OC2H5)2}3]2U

Reaction between [(C₅H₅)Co{P(O)(OEt)₂}₃]₂UCl₂ and neopentyl lithium affords the novel complex, [{η⁴-C₅H₅(CH₂C(CH₃)₃)}Co{P(O)(OEt)₂}₃]₂U, in which the uranium metal center has been dehalogenated and the neopentyl nucleophiles have attacked the cyclopentadienyl groups on the Kläui ([(C₅H₅)Co{P(O)(OEt)₂}₃]⁻) ligands. The uranium atom in the title compound possesses octahedral geometry defined by the oxygen atoms from two sets of tripodal oxygen ligands, while the cyclopentadienyl ligands are bound η⁴ to the cobalt atoms. The formation of this complex suggests that the Kläui ligand may not be a suitable ligand framework for supporting organometallic complexes of oxophilic early actinides.     

Photochemical displacement of the benzene ligand in [(η-C6H6)Ru(CH3CN)2(L)] and [(η-C6H6)Ru(CH3CN)(L2)] (L=CH3CN, PPh3, L2=dppe, bipy)

Photoirradiation with a 150 W medium-pressure Hg lamp for 17 h in acetontrile as the solvent replaces the benzene ligand in the cationic complexes [(η⁶-C₆H₆)Ru(CH₃CN)₂(L)]²⁺ and [(η⁶-C₆H₆)Ru(CH₃CN)(L₂)]²⁺ (L=CH₃CN, PPh₃, L₂=dppe, bipy) with acetonitrile. These replacements are equally clean to those reported before for analogous CpRu⁺ complexes. Crystal structures of the products obtained are included.     

Macropolyhedral boron-containing cluster chemistry: two-electron variations in intercluster bonding intimacy. Contrasting structures of 19-vertex [(η-C5Me5)HIrB18H19(PHPh2)] and [(η-C5Me5)IrB18H18(PH2Ph)]

Fused double-cluster [(η⁵-C₅Me₅)IrB₁₈H₁₈(PH₂Ph)] (8), from syn-[(η⁵-C₅Me₅)IrB₁₈H₂₀] (1) and PH₂Ph, retains the three-atoms-in-common cluster fusion intimacy of 1, in contrast to [(η⁵-C₅Me₅)HIrB₁₈H₁₉(PHPh₂)] (6), from PHPh₂ with 1, which exhibits an opening to a two atoms-in-common cluster fusion intimacy. Compound 8 forms via spontaneous dihydrogen loss from its precursor [(η⁵-C₅Me₅)HIrB₁₈H₁₉(PH₂Ph)] (7), which has two-atoms-in-common cluster-fusion intimacy and is structurally analogous to 6.     

Metal-sulfur dπ-pπ buffering of the oxidations of metal-thiolate complexes: Photoelectron spectroscopy of (η-C5H5)Fe(CO)2SR (SR = SCH3, SBu) and (η-C5H5)Re(NO)(PR3)SCH3 (PR3 = PPr3, PPh3)

The metal-sulfur bonding present in the transition metal-thiolate complexes CpFe(CO)₂SCH₃, CpFe(CO)₂S^tBu, CpRe(NO)(PⁱPr₃)SCH₃, and CpRe(NO)(PPh₃)SCH₃ (Cp = η⁵-C₅H₅) is investigated via gas-phase valence photoelectron spectroscopy. For all four complexes a strong dπ-pπ interaction exists between a filled predominantly metal d orbital of the [CpML₂]⁺ fragment and the purely sulfur 3pπ lone pair of the thiolate. This interaction results in the highest occupied molecular orbital having substantial M-S π^∗ antibonding character. In the case of CpFe(CO)₂SCH₃, the first (lowest energy) ionization is from the Fe-S π^∗ orbital, the next two ionizations are from predominantly metal d orbitals, and the fourth ionization is from the Fe-S π orbital. The pure sulfur pπ lone pair of the thiolate fragment is less stable than the filled metal d orbitals of the [CpFe(CO)₂]⁺ fragment, resulting in a Fe-S π^∗ combination that is higher in sulfur character than the Fe-S π combination. Interestingly, substitution of a tert-butyl group for the methyl group on the thiolate causes little shift in the first ionization, in contrast to the shift observed for related thiols. This is a consequence of the delocalization and electronic buffering provided by the Fe-S dπ-pπ interaction. For CpRe(NO)(PⁱPr₃)SCH₃ and CpRe(NO)(PPh₃)SCH₃, the strong acceptor ability of the nitrosyl ligand rotates the metal orbitals for optimum backbonding to the nitrosyl, and the thiolate rotates along with these orbitals to a different preferred orientation from that of the Fe complexes. The initial ionization is again the M-S π^∗ combination with mostly sulfur character, but now has considerable mixing among several of the valence orbitals. Because of the high sulfur character in the HOMO, ligand substitution on the metal also has a small effect on the ionization energy in comparison to the shifts observed for similar substitutions in other molecules. These experiments show that, contrary to the traditional interpretation of oxidation of metal complexes, removal of an electron from these metal-thiolate complexes is not well represented by an increase in the formal oxidation state of the metal, nor by simple oxidation of the sulfur, but instead is a variable mix of metal and sulfur content in the highest occupied orbital.     

Novel Rh-Mn mixed-metal carbonyl cluster containing μ3 and μ-bridging carbyne ligands, [(μ3-CC6H5)(μ-CC6H5)Rh2Mn2Cp2(μ-CO)3(CO)3]: structure, electrochemistry and catalytic properties

The cationic carbyne complex [Cp(CO)₂MnCC₆H₅]BBr₄ (1) reacts with PPN[Rh(CO)₄] (2) to give the title cluster [(μ₃-CC₆H₅)(μ-CC₆H₅) Rh₂Mn₂Cp₂(μ-CO)₃(CO)₃] (3) whose structure has been determined by X-ray diffraction. The electrochemical properties of 3 have been investigated using cyclic voltammetric method. At 60 °C and 2.0 MPa of initial total CO/H₂ (1:1) pressure, the catalytic activity of 3 towards hydroformylation of styrene has also been checked.     

Synthesis, characterization of [{(N-methyl-N-benzyl)amino}methyl]ferrocenes and their cyclopalladated complexes: Crystal structure of σ-Pd[(η-C5H5)Fe(η-C5H3CH2N(CH3)CH2C6H4NO2-4)]Cl(PPh3)

Condensation of aminomethylferrocene (1) and substituted benzaldehydes resulted in aldimines 2a-c which followed by reduction with sodium borohydride to give 3a-c. N-methylation of 3a-c with HCHO/NaCNBH₃/HOAc led to 4a-c. Treatment of 4a-c with sodium palladium tetrachloride in the presence of sodium acetate afforded cleanly cyclopalladated 5a-c in which configurations consisted of the R_NR_C, S_NS_C. The preferable activation of C_Ferrocenyl-H bond over C_Phenyl-H bond was also observed. All compounds 2-5 were characterized by elemental analysis, IR and ¹H NMR. In addition, the molecular structure of 5c was confirmed by single crystal X-ray diffraction. The possible mechanism for the formation of 5 was also discussed.     

Influence of CH3 group of μ-N-C-S ligand on the properties of [Fe2(C4H5N2S)2(NO)4] complex

Bi-nuclear neutral sulfur-nitrosyl iron complex [Fe₂(SR)₂(NO)₄] (I) has been obtained by replacement of thiosulfate ligands in dianion [Fe₂(S₂O₃)₂(NO)₄]²⁻ by 1-methyl-imidazole-2-yl. From X-ray analysis data, the complex has centrosymmetrical dimeric structure, with the iron atoms being linked via μ-N-C-S bridge. From Mossbauer spectroscopy, isomeric shift δ_Fe is 0.180(1) mm/s and quadrupole splitting ΔE_Q is 0.928(2) mm/s at T = 290 K. By comparative studying the mass-spectra in the gaseous phase of solid samples decomposition and kinetics of NO release in 1% aqueous solutions of dimethylsulfoxide, using of the ligand with CH₃ substituent in position 1 of imidazole-2-thiol was shown to yield a more stable donor of nitrogen monoxide than earlier obtained analog with imidazole-2-thiol, [Fe₂(C₃H₃N₂S)₂(NO)₄].     

Synthesis, spectroscopic and electrochemical characterization of water soluble [(η-C5H5)2Mo(thionucleobase/thionucleoside)]Cl2 complexes

A series of water soluble molybdenocene complexes of general formula [(η⁵-C₅H₅)₂Mo(L)]Cl₂ (L=6-mercaptopurine (2), 6-mercaptopurine ribose (3), 2-amino-6-mercaptopurine (4), 2-amino-6-mercaptopurine ribose (5)) have been prepared by reacting Cp₂MoCl₂ (1) with the corresponding thionucleobase/thionucleoside in a (2:1) THF/MeOH solvent mixture. The complexes have been characterized by spectroscopic methods (NMR, UV-Vis, IR and MS). ¹H NMR spectroscopic data (DMSO-d₆) on the complexes suggest a S-Mo-N(7) coordination by the thionucleobase/thionucleoside. In buffer solution NMR data suggest that the thionucleobase/thionucleoside remains coordinated to molybdenum probably through S(6) and assisted by either N(7) or N(1) atoms. Intermediate species such as [Cp₂Mo(η¹-L)(H₂O)]^2+/1+ where the L is acting as monodentate ligand are possible in solution. Electrochemical characterization has also been pursued by cyclic voltammetry in DMSO and buffer solution. In DMSO, the complexes including the molybdenocene dichloride exhibit reversible redox behavior. On the other hand, in buffer solution, the oxidation process is irreversible for all the species.     

Cu(C6H9N3O2)2Cl2对小麦的生态毒理效应

以冬小麦为实验材料,比较研究了(1)不同浓度配合物对小麦生长的影响;(2)相同浓度的CuC l2、配体C6H9N3O2和配合物Cu(C6H9N3O2)2C l2对冬小麦种子萌发、苗期生长及其保护酶活性的影响。结果表明:与对照相比,(1)不同浓度新配合物对小麦生长具有不同程度的抑制作用,随着浓度的增高抑制作用逐渐增大;(2)CuC l2、配合物Cu(C6H9N3O2)2C l2对小麦种子总淀粉酶活性、蛋白酶活性、萌发率、生长势、根长、株高、总生物量均具有显著的抑制作用,配合物Cu(C6H9N3O2)2C l2的抑制作用小于CuC l2,而配体C6H9N3O2对上述生物学参数具有促进作用;(3)CuC l2、配合物Cu(C6H9N3O2)2C l2处理引起膜脂过氧化,显著的提高了幼苗的M DA浓度,导致SOD、POD、CAT活性降低,CuC l2的抑制作用大于配合物Cu(C6H9N3O2)2C l2,而配体C6H9N3O2处理对SOD、POD、CAT活性的提高有促进作用。上述结果说明C6H9N3O2对CuC l2生理胁迫具有保护作用,结合态的Cu2 (配合物Cu(C6H9N3O2)2C l2)的毒性显著的降低。在此基础上探讨了配合物抑制小麦生长发育的生物学机制。     

A facile reaction of bibenzyl trisulfide with [(η-C5H5)Cr(CO)3]2: formation of a thiolato-bridged dichromium complex of [CpCr(CO)2(SBz)]2 (Bz = PhCH2-)

The reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with an equivalent of Bz₂S₃ at ambient temperature gave [CpCr(CO)₂]₂S (3) [L.Y. Goh, T.W. Hambley, G.B. Robertson, Organometallics 6 (1987) 1051], novel complexes of [CpCr(CO)₂(SBz)]₂ (4) and together with [CpCr(SBz)]₂S (5) as main products. Thermolytic studies showed that 4 underwent complete decarbonylation to give [CpCr(SBz)]₂S (5). Final thermal decomposition of 3 and 5 eventually yielded Cp₄Cr₄S₄ (6) (Goh et al., 1987) after prolonged reaction at 100 °C. However, the reaction of [CpCr(CO)₂]₂ (CrCr) (2) with Bz₂S₃ was much slower at ambient temperature which required 72 h to complete eventually yielding 3 and 5. All the products have been characterized by elemental and spectral analyses. 4 has been structurally determined.     

The reaction between orthodiphenylphosphinobenzaldehyde and [(η-C5Me5)MCl(μ-Cl)]2 (M=Rh and Ir)

The benzaldehyde functionalized phosphine Ph₂PC₆H₄CHO-2 underwent reaction with [(η⁵-C₅Me₅)MCl(μ-Cl)]₂ (M=Rh, Ir) to form (η⁵-C₅Me₅)MCl₂(κP-Ph₂PC₆H₄CHO-2), which underwent activation of the aldehyde C-H bond to form (η⁵-C₅Me₅)MCl(κP,κC-Ph₂PC₆H₄CO-2). Formally the reaction involves oxidative addition of C-H across the metal and reductive elimination of HCl. The structure of (η⁵-C₅Me₅)RhCl(κP,κC-Ph₂PC₆H₄CO-2) has been determined by single-crystal X-ray diffraction.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Reactivity of the bridged borylene complex [μ-BCl{η-C5H4Me)Mn(CO)2}2]

The reactivity of the bridged chloro borylene complex [μ-BCl{(η⁵-C₅H₄Me)Mn(CO)₂}₂] (2a) towards various protic reagents was studied. Reaction of 2a with isopropanol yielded the alkoxy borylene complex [μ-BOiPr{(η⁵-C₅H₄Me)Mn(CO)₂}₂] (3d) in very high yield. A further series of protic reagents HX (X=HS⁻, BF₄⁻, Co(CO)₄⁻) gave, in the presence of pyridine, the new amino borylene complex [1-(μ-B)-4-H-(NC₅H₅){(C₅H₄Me)Mn(CO)₂}₂] (5a), which represents the product of an unprecedented 1,4-hydroboration of pyridine. Complex 5a was fully characterised in solution by multinuclear NMR studies, in the solid state by X-ray diffraction, and was also subject to DFT-studies.