Structures and luminescence of mononuclear and dinuclear base-stabilized gold(I) pyrazolate complexes

The mono- and dinuclear base-stabilized gold(I) pyrazolate complexes, (PPh₃)Au(μ-3,5-Ph₂pz)) (1), (TPA)Au(3,5-Ph₂pz), TPA=1,3,5-triaza-7-phophaadamantane (2), [(PPh₃)₂Au(μ-3,5-Ph₂pz)]NO₃ (3) and [(dppp)Au(μ-3,5-Ph₂pz)]NO₃, dppp=bis(diphenylphosphino)propane (4), have been synthesized and structurally characterized. The mononuclear gold(I) complexes 1 and 2 show intermolecular Au?Au interactions of 3.1540(6) and 3.092(6) Å, while the dinuclear gold(I) complexes 3 and 4 show an intramolecular Au?Au distances of 3.3519(7) and 3.109(2) Å, respectively, typical of an aurophilic attraction. Complexes 1-4 exhibit luminescence at 77 K when excited with ca. 333 nm UV light with an emission maximum at ca. 454 nm. The emission has been assigned to ligand-to-metal charge transfer, LMCT, based upon the vibronic structure that is observed.     

The synthesis, structure and luminescence of two 1D pyrazine-connected Cu(I)-dppm polymers

Two pyrazine-connected 1D copper(I) dppm polymers, {[Cu₃(dppm)₃Br₂][Cu₂(dppm)(pyz)Br₂] Br · (CH₃OH)₂}_n (1) and {[Cu₂(dppm)₂(NO₃)₂(pyz)](pyz)}_n (2) (dppm = bis(diphenylphosphino)methane, pyz = pyrazine) have been synthesized and characterized by X-ray crystallography, luminescence, IR, ¹H, and ³¹P NMR. Structure analysis shows that complex 1 is a neutral 1D polymer in sine-curve-like form, while complex 2 is in linear form. And photoluminescent study of them shows that they exhibit fluorescent emission bands at ca. 434 nm and 431 nm, respectively.     

Gold(I) and silver(I) complexes of 2,3-bis(diphenylphosphino)maleic acid: Structural studies and antitumour activity

The 2:1 and 1:2 adducts of Au(I) and 1:2 adducts of Ag(I) with the diphosphine 2,3-bis(diphenylphosphino)maleic acid (dpmaa) have been prepared in high yields. Crystal structures have been determined for the neutral digold complex (AuCl)₂(dpmaa) · 2thf (1) and the bis-chelated complex [Au(dpmaa)₂]Cl · H₂O · CH₃OH (2). For 1, conformational rigidity imposed by the ethylenic bridge facilitates the formation of short intramolecular Au-Au contacts with no evidence of similar intermolecular contacts. Complex 2 crystallizes with [Au(dpmaa)₂]⁺ cations hydrogen bonded through the carboxyl groups to a water molecule and chloride anion to form a H-bonded chain along the a axis. ³¹P NMR titration of 1 with dpmaa in acetone shows conversion to 2 at Au:P-P ratios less than 1:1 indicating similar high thermodynamic and kinetic stabilities to other bis-chelated [Au(P-P)₂]⁺ complexes containing 5- or 6-membered chelate rings. The ionic Au(I) complex 2 and the analogous Ag(I) complex [Ag(dpmma)₂]NO₃ (3) are highly water soluble. The in vitro cytotoxic activity of 2 was assessed against eight different cell lines and no significant activity was found. The solubility properties and solution behaviour of the complexes are compared to the analogous 1,2-bis(diphenylphosphino)ethane (dppe) complexes and the potential significance of these results to the antitumour properties of chelated 1:2 Au(I)diphosphine complexes are discussed.     

Dinuclear copper(I) complexes containing diimine and phosphine ligands: Synthesis, copper-copper separation and photophysical properties

Dinuclear copper(I) complexes with bridging bis(dicyclohexylphosphino)methane (dcpm) or bis(diphenylphosphino)methane (dppm) and 2,2′-bipyridine or 2-[N-(2-pyridyl)methyl]amino-5,7-dimethyl-1,8-naphthyridine (L), [Cu₂(bpy)₂(dppm)₂](BF₄)₂ (1), [Cu₂(bpy)₂(dcpm)](BF₄)₂ (2), [Cu₂(L)(dppm)](BF₄)₂ (3) and [Cu₂(L)(dcpm)](BF₄)₂ (4) were prepared, and their structures were determined by X-ray crystal analysis. Two-, three-, and four-coordinate copper(I) centers are found in these complexes. Compounds 3 and 4 show close Cu^I?Cu^I separations of 2.664(3) and 2.674(1) Å, respectively, whereas an intramolecular copper-copper distance of 3.038 Å is found in 2 having only dcpm as an additional bridge. Powdered samples of 1, 3, and 4 display intense and long-lived phosphorescence with λ_max at 533, 575, and 585 nm at room temperature, respectively. In the solid state, 2 exhibits only a weak emission at 555 nm. The time-resolved absorption and emission spectra of these complexes were investigated. The difference in the emission properties among complexes 1-4 suggests that both Cu^I?Cu^I distances and coordination environment of the copper(I) centers affect the excited-state properties.     

The synthesis, structure, and characterization of three novel 1D nitrogen-heterocyclic copper(I)-diphosphine polymers

At ambient temperature, three 1D nitrogen-heterocyclic Cu(I)-diphosphine polymers, {[Cu₂(dppm)₂(BF₄)₂(pyz)](CH₂Cl₂)₂}_n (1), {[Cu₂(dppm)₂(4,4′-bpy)(CF₃SO₃)](CF₃SO₃)(CH₃OH)}_n (2), {[Cu₂(dppe)₂ (phen)₂](ClO₄)₂(CH₂Cl₂)}_n (3) (dppm = bis(diphenylphosphino)methane, dppe = bis(diphenylphosphino)ethane, pyz = pyrazine, 4,4′-bpy = 4,4′-bipyridine, phen = 1,10-phenanthroline) have been synthesized and characterized by X-ray crystallography, luminescence, IR, ¹H, and ³¹P NMR. Structure analysis shows that 1 is a 1D linear polymer, 2 is a 1D stair-shaped polymer, and 3 is a 1D W-shaped polymer. A photoluminescent study of them shows that they exhibit fluorescent emission bands at ca. 555 nm, 535 nm and 557 nm, respectively.     

Heteroleptic Cu(I) complexes containing phenanthroline-type and 1,1′-bis(diphenylphosphino)ferrocene ligands: Structure and electronic properties

Three new heteroleptic Cu(I) complexes containing one phenanthroline and one diphosphine type ligand ([Cu(N-N)(P-P)]⁺) have been prepared. In particular, one ligand is constituted by 1,10-phenanthroline (1), 2,9-dimethyl-1,10-phenanthroline (2) and 2,9-diphenethyl-1,10-phenanthroline (3) and the other ligand is in all cases 1,1′-bis(diphenylphosphino)ferrocene (dppf). Therefore, copper and iron metal centres are quite close one another, as evidenced by X-ray crystal diffraction. The structure together with the electrochemical and photophysical properties of these complexes have been compared to that of the corresponding complexes where dppf has been replaced by bis[2-(diphenylphosphino)-phenyl]ether (POP). Cyclic voltammetric experiments evidenced that the first oxidation process is located on the ferrocene moiety and that oxidation of Cu(I) is moved to more positive potential values and a chemical reaction is coupled to the electron transfer process. The absorption spectra show a metal-to-ligand charge transfer (MLCT) band, typical of Cu(I) phenanthroline complexes, at a higher energy compared to the homoleptic [Cu(N-N)₂]⁺ species. No emission at either room temperature or 77 K has been observed for compounds 2 and 3, contrary to the high luminescence observed for the corresponding POP complexes. This result is consistent with a photoinduced energy transfer from the Cu(I) complex to the ferrocene moiety.     

A phosphine complex of copper (I) bromide as single-source precursor for the aerosol-assisted chemical vapour deposition of phosphide

A new homobimetallic complex [Cu₂(tpp)₂(dppm)Br₂] (1) of copper(I) bromide with triphenylphosphine (tpp) and bis-diphenylphosphinomethane (dppm) has been synthesized and charaterized by m.p., elemental analysis, FT-IR, ¹H NMR, mass spectrometry, thermal studies and single crystal X-ray analysis. The solid-state molecular structure of 1, belonging to the monoclinic crystal system with space group P2₁/n, describes it as a neutral dinuclear species in which two copper atoms are bridged together through two bromides and a dppm ligand and each copper atom possesses a distorted tetrahedral geometry. Complex 1 was studied as a single-source precursor for the fabrication of phase pure thin films of Cu₃P by aerosol-assisted chemical vapour deposition. The films have been characterized by PXRD, SEM and ED-XRF analyses and found to exhibit the particles size range 200−400 nm with high purity and surface uniformity.     

Syntheses and characterization of luminescent dinuclear and polynuclear Cu(I) complexes containing 4,4′-bis(diphenylphosphino)biphenylene bridge

The dinuclear complex [Cu₂(dpbp)₂(NCMe)₄][BF₄]₂ (1) has been prepared by treating [Cu(NCMe)₄][BF₄] with 4,4′-bis(diphenylphosphino)biphenylene (abbreviated as dpbp). Reactions of 1 with 2,2′-bipyridine and 1,1′-bis(diphenylphosphino)ferrocene (abbreviated as dppf) afford [Cu₂(dpbp)₂(2,2′-bipy)₂][BF₄]₂ (2) and [Cu₂(dpbp)(dppf)₂][BF₄]₂ (3), respectively. In contrast, compound 1 reacts with tetra(2-pyridyl)ethyl-1,4-diaminobutane (abbreviated as tpyda) to produce the polymeric complex {[Cu₂(dpbp)(tpyda)][BF₄]₂}_n (4). Compounds 1-4 are photoluminescent with the emission band (λ_max) in the range 510-554 nm. The crystal structures of 1 and 4 have been determined by an X-ray diffraction study.     

A new cumulene diiron complex related to the active site of Fe-only hydrogenases and its phosphine substituted derivatives: synthesis, electrochemistry and structural characterization

A new cumulene diiron complex related to the Fe-only hydrogenase active site [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₆] (1) was obtained by treatment of (μ-LiS)₂Fe₂(CO)₆ with excess 1,4-dichloro-2-butyne. By controllable CO displacement of 1 with PPh₃ and bis(diphenylphosphino)methane (dppm), mono- and di-substituted complexes, namely [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅L] (2: L = PPh₃; 3: L = dppm) and [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄L₂] (4: L = PPh₃; 5: L = dppm) could be prepared in moderate yields. Treatment of 1 with bis(diphenylphosphino)ethane (dppe) afforded a double butterfly complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅]₂(μ-dppe) (7). With dppm in refluxing toluene, a dppm-bridged complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄(μ-dppm)] (6) was obtained. These model complexes were characterized by IR, ¹H, ³¹P NMR spectra and the molecular structures of 1, 2 and 5-7 were determined by single crystal X-ray analyses. The electrochemistry of 1-3 was studied and the electrocatalytic property of 1 was investigated for proton reduction in the presence of HOAc.     

Synthesis of cyclopentadienyl ruthenium complexes containing 5-membered N-heterocyclic thiolates

Mononuclear ruthenium-thiolate complexes of structural type CpRu(PPh₃)₂SR (1) [R = 2-imidazolyl (a), 1-methylimidazolyl (b), 5-methyl-1,3,5-thiadiazolyl (c) and 5-methyl-4H-1,2,4-triazolyl (d)] are accessible from the reaction of CpRu(PPh₃)₂Cl with the corresponding thiolate anions. Reaction of CpRu(PPh₃)₂Cl with the heterocyclic-thiolate anions in the presence of the bisphosphine ligands affords CpRu(P-P)SR [P-P = bis(diphenylphosphino)methane; dppm (2), bis(diphenylphosphino)ethane; dppe (3)]. If CO gas was bubbled through a THF solution of 1b, the complex CpRu(PPh₃)(CO)S(C₄N₂H₅) (4b) is produced. These ruthenium-heterocyclic thiolate complexes have been characterized by elemental analysis, spectroscopy (IR, ¹H, ³¹P{¹H} NMR and MS) and cyclic voltammetry for some samples. The solid-state structures of 3a and 3b are determined by single-crystal X-ray structure analysis.     

Heptacoordinate dithiophosphate W(II) and Mo(II) complexes of diphosphines and iodide

New complexes [MI(CO)₂(dppe){S₂P(OEt)₂}] (M=W, 1a; M=Mo, 1b), [MI(CO)₂(dppm){S₂P(OEt)₂}] (M=W, 2a; M=Mo, 2b) and [W(CO)(dppe){S₂P(OEt)₂}₂][O₂dppe] (3a), were synthesised from [MI₂(CO)₃(NCMe)₂] (M=Mo, W), after treatment with ammonium diethyldithiophosphate and phosphine under different conditions. The structure of the tungsten complexes was determined by single crystal X-ray diffraction. During the synthesis of 3a, oxidation of the phosphine took place and a molecule of oxidised phosphine occupies channels in the crystal. DFT/B3LYP calculations on models of 1a and 2a showed the capped octahedron structure, observed in most dicarbonyl complexes of this family, to be preferred by 1.4 and 2.6 kcal mol⁻¹ for the dppm and the dppe complexes, respectively. Strong steric repulsions can reverse this trend, as happens with the rigid dppm ligand. Complex 1a adopts a pentagonal bipyramidal geometry, which is often found in related monocarbonyl complexes.     

New ruthenium(II) thiolato complexes: Synthesis, reactivity, spectral, structural and DFT studies

Ruthenium complexes [Ru(mpy)₂(DMSO)₂] (1) and [Ru(mbtz)₂(DMSO)₂] (2) containing 2-mercaptopyridine (mpy) and 2-mercaptobenzothiazole (mbtz) have been synthesized. Reactivity of 1 have been examined with 2,2′-bipyridine (bipy), 1,10-phenanthroline (phen), EPh₃ (E = P, As) and 1,2-bis(diphenylphosphino)-methane (dppm). It reacted with bipy or phen in DMF to afford [Ru(mpy)₂(bipy)] (3) and [Ru(mpy)₂(phen)] (4) while, its reaction with EPh₃ or dppm in common organic solvents failed to afford products containing EPh₃ or dppm. Complexes under investigation have been characterized by elemental analyses, spectral, electrochemical studies and structures of 1-4 have been determined crystallographically. Density functional theory calculations have been performed on 1-4 and the model complex [Ru(mpy)(PMe₃)₂] (5) using exchange correlation functionals BP86. Optimized bond length and angles are in good agreement with the structural data. The Ru-N and Ru-S bond distances in [Ru(mpy)₂]-moiety of 1 are relatively shorter than 5, indicating higher stability of 1 in comparison to 5. The WBI values of Ru-N1, Ru-N2, Ru-S1 and Ru-S2 bonds indicate Ru-mpy bonding trend as 3 > 4 > 1 > 5. There is an overall charge flow in the direction L → [Ru(mpy)₂] (L = DMSO, bipy, phen and PMe₃). Due to greater ionic character and Pauli repulsive interactions for Ru-PMe₃ bond in comparison to Ru-DMSO, the DMSO ligands in 1 may not be substituted by phosphine ligands experimentally.     

Construction of two novel tungsten(VI)-silver(I) mixed metal clusters controlled by bis(diphenylphosphino) methane and coordinated inorganic anions

By the reaction of [Ag₃(dppm)₃I₂]I with (NH₄)₂WS₄ in MeCN/DMF (1:1), a trigonal bipyramid-shaped cluster [Ag₃ I (dppm)₂ WS₄] (1) was isolated [dppm = bis (diphenylphosphino) methane]. By the reaction of (NH₄)₂WS₄ with AgSCN and dppm in MeCN/DMF (1:1) in the presence of 1,10-phenathroline, an insect-shaped cluster [Ag₄ (SCN)₂ (dppm)₄WS₄]·H₂O (2) was synthesized. Compounds 1 and 2 were characterized by single-crystal X-ray diffraction, luminescence, IR, UV-Vis, ¹H and ³¹P NMR spectroscopy. In 1, and μ₃-I are coordinated to three Ag atoms, which are further bridged by two dppm ligands. In 2, Ag1 and Ag4 are coordinated by two P atoms from two dppm ligands, one μ₃-S from and one S atom from SCN⁻ while Ag2 and Ag3 are coordinated by one μ₂-S atom and one μ₃-S atom from , two P atoms from two dppm ligands.     

Synthesis, structures and ligating properties of 2,6-bis(phosphino)thiophenol derivatives

New t-butyl-aryl thioethers where the aryl group is 2,6-bis(phosphino)phenyl have been synthesized. The syntheses were completed via sequential ortho-lithiations of t-butylphenylsulfide, followed by chlorophosphine (ClPR₂) quenches; symmetric (2,6-bis(diphenylphosphino)phenyl, (4a)) and unsymmetric (2-diisopropylphosphino-6-diphenylphosphino)phenyl, (4b) aryl groups were obtained. Treatment of 4a with Li or Na naphthalenide yielded 2,6-bis(diphenylphosphino)thiophenol 5. Reactions of 4a or 5 with NiCl₂ · 6H₂O yielded nickel bis(phosphinothiophenolate) 6. Compounds 4a,b, 5 and 6 were characterized by ¹H and ³¹P NMR, and by mass-spectrometry. In addition, 4a, 5 and 6 were characterized by single crystal X-ray diffraction methods.     

The synthesis, structure, and luminescence of two silver(I)-dppm complexes based on sulfate anion and nitrogen heterocyclic ligands

At ambient temperature, two silver(I) complexes [Ag₄(SO₄)₂(dppm)₄]·5CH₃CH₂OH·1/2H₂O (1) and [Ag₂(SO₄)(dppm)₂(2-ampz)]·CH₃OH·H₂O (2) (dppm = bis(diphenylphosphino)methane, 2-ampz = 2-aminopyrazine) were obtained by the reaction of Ag₂SO₄ with dppm in the presence of pyrazine or 2-aminopyrazine. They are characterized by IR, X-ray crystallography, luminescence and ¹H, ³¹P NMR spectroscopy. Complex 1 is a tetranuclear cluster. In complex 2, the units [Ag₂(SO₄)(dppm)₂] are connected by 2-aminopyrazine to form a 1D linear polymer. Due to the subtle interactions of different nitrogen heterocyclic ligands with silver ions, two SO₄²⁻ anions in 1 adopt μ₃-O, O′, O′ and unique μ₄-O, O, O′, O′ bonding modes respectively, while SO₄²⁻ anion in 2 adopts μ-O, O′ bonding mode.     

Conformation-sensitive molecular pendulums: variable temperature NMR study of dimeric palladium(I) bisphosphine complexes

Solution and solid state ³¹P NMR studies were carried out on a series of [Pd₂X₂(dppm)₂] (X = Cl (1a), Br (1b), I (1c)), or [Pd₂XY(dppm)₂] (X = Cl, (1d)) complexes and on methyl substituted derivatives such as [Pd₂Cl₂(dppm)(dppmMe)] (2), syn-[Pd₂Cl₂(dppmMe)₂] (3), and anti-[Pd₂Cl₂(dppmMe)₂] (4) (dppmMe = 1,1-bis(diphenylphosphino)ethane) in order to study and understand the conformational behaviour of the eight-membered Pd₂P₄C₂ rings depending on the substituents and their stereochemistry. These complexes with metal-metal bonds and mutually trans-dppm ligands act as molecular pendulums. On the basis of temperature dependent spectra qualitative correlations have been found between the molecular conformations and the rate of a specific intramolecular motion called “swinging”. While for the extended-boat conformers (2 and 3) this exchange process is of intermediate energy (41-45 kJ mol⁻¹), the barrier is definitely higher (∼54 kJ mol⁻¹) for the extended-chair conformer 4. Changes of symmetry relations are reflected very vividly in the ³¹P NMR spectra.The observed different chemical shifts, “swinging” rates and activation free energies obtained for the boat and chair conformers are explained by the steric effects and low-temperature conformations of the axial phenyl groups.     

Synthesis, characterisation and natural abundance Os NMR spectroscopy of hydride bridged triosmium clusters with chiral diphosphine ligands

Treatment of [Os₃(μ-H)₂(CO)₁₀] with the chiral diphosphines BINAP, tolBINAP [(R)-2,2′-bis(di-4-tolylphosphino)-1,1′-binaphthyl], DIOP [(4R,5R)-(−)-O-isopropenylidene-2,3-dihydroxy-1,4-bis(diphenylphosphino)butane] affords [Os₃(μ-H)₂(CO)₈(μ-L)] (L = BINAP (1), tolBINAP (2), DIOP (4)) in high yield. The X-ray structures for 1, 2 and 4 are reported, and structural and spectroscopic comparisons are made between these clusters and [Os₃(μ-H)₂(CO)₈(μ-L)] (L = dppm (5), dppe (6), dppp (7)) which were synthesised similarly. Compounds 5 to 7 were previously synthesised by hydrogenation of 1,2-[Os₃(CO)₁₀(μ-L)] but the route from [Os₃(μ-H)₂(CO)₁₀] is preferable. The H-bridged Os?Os distances are similar in 1, 2 and 4 indicating that these species are formally unsaturated 46-electron clusters. The P?P distances vary from 4.24 to 4.30 Å in 1 and 2, respectively, to 4.53 Å in 4 and there are related changes in the angles associated with the ligand set around the H-bridged osmium atoms. Introduction of the diphosphine ligands completely suppresses the ability to add CO, to insert acetylene to form a μ-η¹,η²-vinyl compound, and to exchange hydride ligands with styrene-d₈, which are reactions characteristic of [Os₃(μ-H)₂(CO)₁₀]. Clusters 2 and 5-7 were also used to examine the potential of natural abundance ¹⁸⁷Os NMR spectroscopy through techniques based on inverse detection by HMQC, HSQC and HMBC spectroscopy.     

Influence of the phosphine arrangement on the reactivity of palladium(II) and platinum(II) polyphosphine complexes with copper(I) chloride

The distorted square-planar complexes [Pd(PNHP)Cl]Cl (1) (PNHP = bis[2-(diphenylphosphino)ethyl]amine), [M(P₃)Cl]Cl [P₃ = bis[2-(diphenylphosphino)ethyl]phenylphosphine; M = Pd (2), Pt (3)] and [Pt(NP₃)Cl]Cl (5) (NP₃ = tris[2-(diphenylphosphino)ethyl]amine), coexisting in the later case with a square-pyramidal arrangement, react with one equivalent of CuCl to give the mononuclear heteroionic systems [M(L)Cl](CuCl₂) [L = PNHP, M = Pd (1a); L = P₃, M = Pd (2a), Pt (3a); L = NP₃, M = Pt (5a)]. The crystal structure of 3a confirms that Pt(II) retains the distorted square-planar geometry of 3 in the cation with P₃ acting as tridentate chelating ligand, the central P atom being trans to one chloride. The counter anion is a nearly linear dichlorocuprate(I) ion. However, the five-coordinate complexes [Pd(NP₃)Cl]Cl (4), [M(PP₃)Cl]Cl (M = Pd (6), Pt (7); PP₃ = tris[2-(diphenylphosphino)ethyl] phosphine) containing three fused five-membered chelate rings undergo a ring-opening by interaction with one (4, 6, 7) and two (6, 7) equivalents of CuCl with formation of neutral MCu(L)Cl₃ [L = NP₃, M = Pd (4a); L = PP₃, M = Pd (6a), Pt (7a)] and ionic [MCu(PP₃)Cl₂](CuCl₂) [M = Pd (6b), Pt (7b)] compounds, respectively. The heteronuclear systems were shown by ³¹P NMR to have structures where the phosphines are acting as tridentate chelating ligands to M(II) and monodentate bridging to Cu(I). Further additions of CuCl to the neutral species 6a and 7a in a 1:1 ratio resulted in the achievement of the ionic complexes 6b and 7b with ions as counter anions. It was demonstrated that the formation of heterobimetallic or just mononuclear mixed salt complexes was clearly influenced by the polyphosphine arrangement with the tripodal ligands giving the former compounds. However, complexes [M(NP₃)Cl]Cl constitute one exception and the type of reaction undergone versus CuCl is a function of the d⁸ metal centre.     

Synthesis and structural characterizations of para-bis(dialkyl/diarylphosphino)phenylenes built around tetrahalogenated benzene cores

Double deprotonation of 1,2-dibromo-4,5-difluorobenzene and 1-bromo-2-chloro-4,5-difluorobenzene by lithium diisopropylamide (LDA) in ethereal solutions is facile at very low temperatures (T < −90 °C). The organo-dilithium intermediates thus generated react readily with chlorophosphines ClPR₂ (R = Ph and/or ⁱPr), producing 1,2-dibromo-3,6-bis(diphenylphosphino)-4,5-difluorobenzene (1a), 1,2-dibromo-3,6-bis(diisopropylphosphino)-4,5-difluorobenzene (1b) and 1-bromo-2-chloro-3,6-bis(diphenylphosphino)-4,5-difluorobenzene (1c). Corresponding P-oxides 2a-c are obtained by oxidation of 1a-c with H₂O₂. Analogous reactions of 1,2-dibromo-4,5-difluorobenzene and 1-bromo-2-chloro-4,5-difluorobenzene with only 1 equiv. of LDA do not result in selective monodeprotonations, as 1a and 1c are formed preferentially after ClPPh₂ quench. All of the isolated new compounds were fully characterized by multinuclear NMR spectroscopy, elemental analysis and/or mass-spectrometry. In addition, 1a, 1c, 2a, and 2b were characterized by single crystal X-ray diffraction methods.     

Structures, fluorescent properties of the Ag(I) compounds based on molecular clips with biphenyl core

Three silver complexes Ag₂(L)₂(NO₃)₂ (1), Ag₂(L)₂(SO₃CF₃)₂(H₂O)_0.5 (2), and [Ag₂(L)₂(NO₃)₂]_n (3) were prepared from molecular clips, 2,2′-Bis(imidazol-1-ylmethyl)-biphenyl (L) and structurally characterized to investigate the structural-luminescent relation. Compound 1 is a bimetallic supramolecular rectangle in which two L ligands are connected by two linearly coordinated Ag(I) ions. Compound 2 is described as a double helicate due to the nature of the twist of the imidazole groups after coordination to Ag(I) centers. In compound 3, the Ag(I) centers are connected by L ligands into a one-dimensional zigzag chain. Solid state and solution fluorescent measurements exhibit the presence of ligand-based emission at 415 and 435 nm of compounds 1 and 2, respectively. It is said that the dihedral angles between the two imidazole rings coordinated to one Ag(I) center affect the emission properties.