Synthesis, characterisation and natural abundance Os NMR spectroscopy of hydride bridged triosmium clusters with chiral diphosphine ligands

Treatment of [Os₃(μ-H)₂(CO)₁₀] with the chiral diphosphines BINAP, tolBINAP [(R)-2,2′-bis(di-4-tolylphosphino)-1,1′-binaphthyl], DIOP [(4R,5R)-(−)-O-isopropenylidene-2,3-dihydroxy-1,4-bis(diphenylphosphino)butane] affords [Os₃(μ-H)₂(CO)₈(μ-L)] (L = BINAP (1), tolBINAP (2), DIOP (4)) in high yield. The X-ray structures for 1, 2 and 4 are reported, and structural and spectroscopic comparisons are made between these clusters and [Os₃(μ-H)₂(CO)₈(μ-L)] (L = dppm (5), dppe (6), dppp (7)) which were synthesised similarly. Compounds 5 to 7 were previously synthesised by hydrogenation of 1,2-[Os₃(CO)₁₀(μ-L)] but the route from [Os₃(μ-H)₂(CO)₁₀] is preferable. The H-bridged Os?Os distances are similar in 1, 2 and 4 indicating that these species are formally unsaturated 46-electron clusters. The P?P distances vary from 4.24 to 4.30 Å in 1 and 2, respectively, to 4.53 Å in 4 and there are related changes in the angles associated with the ligand set around the H-bridged osmium atoms. Introduction of the diphosphine ligands completely suppresses the ability to add CO, to insert acetylene to form a μ-η¹,η²-vinyl compound, and to exchange hydride ligands with styrene-d₈, which are reactions characteristic of [Os₃(μ-H)₂(CO)₁₀]. Clusters 2 and 5-7 were also used to examine the potential of natural abundance ¹⁸⁷Os NMR spectroscopy through techniques based on inverse detection by HMQC, HSQC and HMBC spectroscopy.     

Synthesis, structure, photophysical and electrochemical behavior of 2-amino-anthracene triosmium clusters

The reactions of 2-amino-anthracene with [Os₃(CO)₁₀(CH₃CN)₂] have been studied and the products structurally characterized by spectroscopic, X-ray diffraction, photophysical and electrochemical techniques. At room temperature in CH₂Cl₂ two major, isomeric products are obtained [Os₃(CO)₁₀(μ-η²-(N-C(1))-NH₂C₁₄H₈)(μ-H)] (1, 14%) and [Os₃(CO)₁₀(μ-η²-(N-C(3))-NHC₁₄H₉)(μ-H)] (2, 35%) along with a trace amount of the dihydrido complex [Os₃(CO)₉(μ-η²-(N-C(3))-NHC₁₄H₈)(μ-H)₂] (3). In refluxing tetrahydrofuran only complexes 2 and 3 are obtained in 24% and 28%, respectively. A separate experiment shows that complex 1 slowly converts to 2 and that the rearrangement is catalyzed by adventitious water and involves proton transfer to the anthracene ring. Complex 1 is stereochemically non-rigid; exhibiting edge to edge hydride migration while 2 is stereochemically rigid. Complex 3 is also stereochemically non-rigid showing a site exchange process of the magnetically nonequivalent hydrides typical for trinuclear dihydrides. Interestingly, 2 decarbonylates cleanly to the electronically unsaturated 46e⁻ cluster [Os₃(CO)₉(μ₃-η²-(N-C(3))-NHC₁₀H₉)(μ-H)] (4, 68%) in refluxing cyclohexane, while photolysis of 2 in CH₂Cl₂ yields only a small amount of 3 along with considerable decomposition. The mechanism of the conversion of 1 to 2 and the dependence of the product distribution on solvent are discussed. All four compounds are luminescent with compounds 1-3 showing emissions that can be assigned to radiative decay associated with the anthracene ligand. Complexes 1-3 all show irreversible 1e⁻ reductions in the range of −1.85-2.14 V while 4 shows a nicely reversible 1e⁻ wave at −1.16 V and a quasi-reversible second 1e⁻ wave at −1.62 V. Irreversible oxidations are observed in the range from +0.35 to +0.49 V. The relationship between the cluster ligand configurations and the observed electrochemical and photochemical behavior is discussed and compared with that of the free ligand.     

Reactivity of electron-deficient triosmium quinoline cluster [Os3(CO)9(μ3-η-C9H6N)(μ-H)] with alkynes

Reactions of the electron-deficient triosmium cluster [Os₃(CO)₉(μ₃-η²-C₉H₆N)(μ-H)] (1) with various alkynes are described. Cluster 1 readily reacts with the activated alkyne dimethyl acetylenedicarboxylate (dmad) upon mild heating (65-70 °C) to give the adduct [Os₃(CO)₉(μ-C₉H₆N)(μ₃-MeO₂CCCHCO₂Me)] (2). In contrast, a similar reaction of 1 with diphenylacetylene affords previously reported compounds [Os₃(CO)₁₀(μ-η²-C₉H₆N)(μ-H)] (3), [Os₃(CO)₉(μ-C₄Ph₄)] (4) and [Os₃(CO)₈{μ₃-C(C₆H₄)C₃Ph₃}(μ-H)] (5) while with 2-butyne gives only the known compound [Os₃(CO)₇(μ-C₄Me₄)(μ₃-C₂Me₂)] (6). The new cluster 2 has been characterized by a combination of spectroscopic data and single crystal X-ray diffraction analysis.     

Construction of carbon chains on ruthenium and osmium carbonyl clusters

We have used the elimination of AuX(PR₃) (X = halide, R = Ph, tol) that occurs in reactions of alkynylgold(I)-phosphine complexes with M₃(μ-H)₃ (μ₃-CBr) (CO)₉ (M = Ru, Os) to prepare the complexes M₃(μ-H)₃(μ₃-CCCR)(CO)₉ [M = Ru, R = Ph 2, CCSiMe₃3, Fc 4, CCFc 6-Ru, CC[Ru(PPh₃)₂Cp] 8; M = Os, R = CCFc 6-Os, CCCCFc 7], Fc′{(μ₃-CCC)Ru₃(μ-H)₃(CO)₉}₂5, and bis-cluster-capped carbon chain complexes {M₃(μ-H)₃(CO)₉}₂{μ₃:μ₃-C(CC)_nC} (M = Ru, n = 2 9, 3 10-Ru; M = Os, n = 3 10-Os) and {(L)(OC)₈(μ-H)₃M₃}C(CC)_nC{Co₃(μ-dppm)(CO)₇} (n = 1, M = Ru, L = CO 11, PPh₃12-Ru/P; n = 2, L = CO 12-Ru, PPh₃13; M = Os, L = CO 12-Os) in good to excellent yields. X-ray structural determinations of 2-5, 6-Ru, 6-Os, 7, 9, 11, 12-Ru, 12-Os and 12-Ru/P are reported.     

Carbon-hydrogen bond activation of phenyldi(2-thienyl)phosphine at a triosmium cluster centre

The phenyldi(2-thienyl)phosphine (PhPTh₂) complexes [Os₃(CO)_12−n(PhPTh₂)_n] (n = 1-3) (1-3) have been prepared. Thermolysis of 1 and either 2 or 3 in octane affords carbon-hydrogen bond activation products [Os₃(CO)₉{μ₃-PPhTh(C₄H₂S)}(μ-H)] (4) and [Os₃(CO)₈(PPhTh₂){μ₃-PPhTh(C₄H₂S)}(μ-H)] (5), respectively. Both exist as isomeric mixtures differing in the relative positions of phenyl and thienyl substituents with respect to the triosmium centre. The nature of the process has been confirmed by a single crystal X-ray diffraction analysis of 4.     

Neighbouring metal induced oxidative addition at the iron centre amongst the iron-arylpyridylphosphine complexes

Complexes of the type (η⁴-BuC₅H₅)Fe(CO)₂(P) (P = PPh₂Py 3, PPhPy₂4, PPy₃5; Py = 2-pyridyl) were satisfactorily prepared. Upon treatment of 3 with M(CO)₃(EtCN)₃ (M = Mo, 6a; W, 6b), the pyridyl N-atom could be coordinated to the metal M, which then eliminates a CO ligand from the Fe-centre and induced an oxidative addition of the endo-C-H of (η⁴-BuC₅H₅). This results in a bridged hydrido heterodimetallic complex [(η⁵-BuC₅H₄)Fe(CO)(μ-P,N-PPh₂Py)(μ-H)M(CO)₄] (M = Mo, 7a, 81%; W, 7b, 76%). The reaction of 4 or 5 with 6a,b did not give the induced oxidative addition, although these complexes contain more than one pyridyl N-atom. The reaction of 4 with M(CO)₄(EtCN)₂ (M = Mo, 9a; W, 9b) produced heterodimetallic complexes [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′-PPhPy₂)M(CO)₄] (M = Mo, 10a, 81%; W, 10b, 83%). Treatment of 5 with 6a,b gave [(η⁴-BuC₅H₅)Fe(CO)₂(μ-P:N,N′,N″-PPy₃)M(CO)₃] (M = Mo, 12a, 96%; W, 12b, 78%).     

Reactivity of phenyldi(2-thienyl)phosphine towards group 7 metal carbonyls: Carbon-phosphorus bond activation

Addition of phenyldi(2-thienyl)phosphine (PPhTh₂) to [Re₂(CO)_10−n(NCMe)_n] (n = 1, 2) affords the substitution products [Re₂(CO)_10−n(PhPTh₂)_n] (1, 2) together with small amounts of fac-[ClRe(CO)₃(PPhTh₂)₂] (3) (n = 2). Reaction of [Re₂(CO)₁₀] with PPhTh₂ in refluxing xylene affords a mixture which includes 2, [Re₂(CO)₇(PPhTh₂)(μ-PPhTh)(μ-H)] (4), [Re₂(CO)₇(PPhTh₂)(μ-PPhTh)(μ-η¹,κ¹(S)-C₄H₃S)] (5) and mer-[HRe(CO)₃(PPhTh₂)₂] (6). Phosphido-bridged 4 and 5 are formed by the carbon-phosphorus bond cleavage of the coordinated PPhTh₂ ligand, the cleaved thienyl group being retained in the latter. Reaction of [Mn₂(CO)₁₀] with PPhTh₂ in refluxing toluene affords [Mn₂(CO)₉(PPhTh₂)] (7) and the carbon-phosphorus bond cleavage products [Mn₂(CO)₆(μ-PPhTh)(μ-η¹,η⁵-C₄H₃S)] (8) and [Mn₂(CO)₅(PPhTh₂)(μ-PPhTh)(μ-η¹,η⁵-C₄H₃S)] (9). Both 8 and 9 contain a bridging thienyl ligand which is bonded to one manganese atom in a η⁵-fashion.     

Low temperature allene coupling and isomerization at triosmium clusters

Facile coupling and isomerization of allene (CH₂CCH₂) has been found on its interaction at low temperatures with [H₂Os₃(CO)₁₀] to give the di-allyl species [Os₃(μ₃-η¹:η²:η³-C₆H₈)(CO)₁₀] (1) and [Os₃(μ₃-η¹:η²:η³-C₆H₈)(CO)₉] (2) in which two allene molecules are bonded in an end-to-centre array. Cluster 2 converts either in solution or in the solid state into two different species: the colourless derivative [Os₃H(μ₃-η¹:η¹:η¹:η²-C₆H₇)(CO)₉] (3) and the metallocyclopentadiene [Os₃(μ-η¹:η¹:η²:η²-C₆H₈)(CO)₉] (4), which could be regarded as the result of 1,3-hydrogen shifts of the coupled allene at triosmium clusters.     

Tungsten complexes of aromatic and aliphatic thioaldehydes

Reaction of PPN[W(CO)₃(R₂PC₂H₄PR₂)(SH)] (PPN=Ph₃PNPPh₃; R=Me, 1; R=Ph, 2) with aromatic aldehydes in the presence of trifluoroacetic acid gave tungsten complexes of thiobenzaldehydes mer-[W(CO)₃(R₂PC₂H₄PR₂)(η²-SCHR^′)] (R=Me, 3a-3f; R=Ph, 4a-4e) in high yields. Analogous complexes of aliphatic thioaldehydes mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-SCHR^′)] (3g-3l) could only be obtained from the highly electron-rich thiolate complex 1. The structure of 3i (R^′=i-Bu) was determined by X-ray crystallography. In solution the complexes 3 and 4 are in equilibrium with small quantities of their isomers fac-[W(CO)₃(R₂PC₂H₄PR₂)(η²-SCHR^′)]. Reaction of complexes 3 with dimethylsulfate followed by salt metathesis with NH₄PF₆ gave the alkylation products mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-MeSCHR^′)]PF₆ (5a-5l) as mixtures of E and Z isomers. The methylated thioformaldehyde complex mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(η²-MeSCH₂)]PF₆ (5m) was prepared similarly. Nucleophilic addition of hydride (from LiAlH₄) to 5 initially gave thioether complexes mer-[W(CO)₃(Me₂PC₂H₄PMe₂)(MeSCH₂R^′)] (mer-6) which rapidly isomerized to fac-[W(CO)₃(Me₂PC₂H₄PMe₂)(MeSCH₂R^′)] (fac-6).     

New pyridyl modified phosphines: Synthesis and late transition-metal coordination studies

Using a phosphorus based Mannich condensation reaction the new pyridylphosphines {5-Ph₂PCH₂N(H)}C₅H₃(2-Cl)N (1-Cl) and {2-Ph₂PCH₂N(H)}C₅H₃(5-Br)N (1-Br) have been synthesised in good yields (60% and 88%, respectively) from Ph₂PCH₂OH and the appropriate aminopyridine. The ligands 1-Cl and 1-Br display variable coordination modes depending on the choice of late transition-metal complex used. Hence P-monodentate coordination has been observed for the mononuclear complexes AuCl(1-Cl) (2), AuCl(1-Br) (3), RuCl₂(p-cymene)(1-Cl) (4), RuCl₂(p-cymene)(1-Br) (5), RhCl₂(Cp^∗)(1-Cl) (6), RhCl₂(Cp^∗)(1-Br) (7), IrCl₂(Cp^∗)(1-Cl) (8), IrCl₂(Cp^∗)(1′-Cl) (8′), IrCl₂(Cp^∗)(1-Br) (9), cis-/trans-PdCl₂(1-Cl)₂ (10), cis-/trans-PdCl₂(1-Br)₂ (11), cis-PtCl₂(1-Cl)₂ (12) and cis-PtCl₂(1-Br)₂ (13). Reaction of Pd(Me)Cl(cod) (cod = cycloocta-1,5-diene) with either 1 equiv. of 1-Br or the known pyridylphosphines 1′-Cl, 1-OH or 1-H gave the P/N-chelate complexes Pd(Me)Cl(1-Br-1-H) (14)-(17). All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 4, 5, 10 and 16 · (CH₃)₂SO have been elucidated by single crystal X-ray crystallography. A crystal structure of the dinuclear metallocycle trans,trans-[PdCl₂{μ-P/N-{Ph₂PCH₂N(H)}C₅H₄N}]₂ · CHCl₃, 18 · CHCl₃, has also been determined. Here 1-H bridges, using both P and pyridyl N donors, two dichloropalladium centres affording a 12-membered ring with the PdCl₂ units adopting a head-to-tail arrangement.     

Coordination polymers derived from a bis-pyridyl-bis-amide ligand: Supramolecular structural diversities and anion binding properties

Six new coordination polymers namely [{Cu(μ-L1)(CH₃COO)₂}]_∝1a, [{Cu(μ-L1)₂(CH₃COO)₂]_∝1b, [{Cu(μ-L1)₂(H₂O)₂}(NO₃)₂]_∝2, [{Cu(μ-L1)₂(H₂O)₂}(ClO₄)₂]_∝3, [{Cu(μ-L1)(H₂O)₂(μ-SO₄)}·3H₂O]_∝4a and [{Cu(μ-L1)₂SO₄}·X]_∝4b (L1 = N,N′-bis-(3-pyridyl)terephthalamide) have been synthesized. Single crystal structures of five coordination polymers namely 1a, 2-4b and the free ligand L1 are discussed in the context of the effect of conformation dependent ligating topology of the ligands, hydrogen bonding backbone, counter anions on the resultant supramolecular structures observed in these coordination polymers. It was revealed from the single crystal X-ray structure analysis that conformation dependent ligating topology of the bis-amide ligand L1, counter anion’s ligating strength dependent metal: ligand ratio, hydrogen bonding ability of the ligand as well as counter anions are responsible for the formation of 1D zigzag, 1D looped chain, 2D corrugated sheet in 1a, 2-3, 4a−4b, respectively. By following in situ coordination polymer crystallization technique, anion binding and separation studies have also been performed; nitrate anion has been separated as neat coordination polymer crystals from a complex mixture of anions.     

Dinuclear ruthenium sawhorse-type complexes containing carboxylato bridges and ferrocenyl substituents: Synthesis and electrochemistry

The ferrocenyl-containing diruthenium complexes [Ru₂(CO)₄(μ₂-η²-OOCFc)₂L₂] (Fc = ferrocenyl, fc = ferrocen-1,1′-diyl; 1: L = NC₅H₄-COOC₆H₄-OC₁₀H₂₁, 2: L = NC₅H₄-COOC₆H₄-OC₁₆H₃₃, 3: L = NC₅H₄-OOC-fc-C₁₂H₂₅) and [Ru₂(CO)₄(μ₂-η²-OOC₆H₅)₂(NC₅H₄-OOC-fc-C₁₂H₂₅)₂] (4) have been synthesized from Ru₃(CO)₁₂, ferrocene carboxylic or benzoic acid and the corresponding pyridine derivative. The synthesis of the new pyridine derivative NC₅H₄-OOC-fc-C₁₂H₂₅ used for the preparation of 3 and 4 is also reported. Complexes 1-4 posses a so-called sawhorse structure consisting of the Ru₂(CO)₄ backbone and two bridging carboxylato ligands, while the coordination sphere around the ruthenium atoms is completed by the pyridine-derived ligands bonded in the axial positions. The electrochemical behavior of 1-4 and their known analogues [Ru₂(CO)₄(μ₂-η²-OOCFc)₂L₂] (5: L = NC₅H₅, 6: L = P(C₆H₅)₃, 7: L = NC₅H₄-OOCFc) has been studied by voltammetry on rotating disc electrode and by cyclic voltammetry.     

Chalcogenide-capped triruthenium clusters: X-ray structures of [Ru3(CO)6(μ3-CO){P(C4H3S)3}(μ-dppm)(μ3-O)] and [(μ-H)2Ru3(CO)6{P(C4H3S)3}(μ-dppm)(μ3-S)]

Treatment of [Ru₃(CO)₉{P(C₄H₃S)₃}(μ-dppm)] (1) [dppm = bis(diphenylphosphino)methane] with molecular oxygen in benzene at 60 °C affords oxo-capped [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-O)] (2), while with elemental sulfur and selenium related chalcogenide-capped clusters [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-E)] (3, E = S; 5, E = Se) and bis(chalcogenide) clusters [Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-E)₂] (4, E = S; 6, E = Se) result. Reaction of 1 with H₂S in refluxing THF affords the previously reported [(μ-H)₂Ru₃(CO)₇(μ-dppm)(μ₃-S)] (7) together with the new sulfido-capped dihydride [(μ-H)₂Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-S)] (8). All new compounds have been characterized by spectroscopic data, and 2 and 8 by single-crystal X-ray diffraction analyses. Oxo-capped 2 consists of a triangular ruthenium framework capped on opposite sides by oxo and carbonyl groups, while 8 consists of a ruthenium triangle by a capping sulfido ligand and two inequivalent bridging hydride ligands.     

Reactions of 1,8-bis(diphenylphosphino)naphthalene with ruthenium cluster carbonyls: C-H and C-P bond cleavage reactions

Reactions between Ru₃(CO)₁₂ and 1,8-bis(diphenylphosphino)naphthalene (dppn) have given the four complexes Ru₃(μ-H){μ₃-PPh₂(nap)PPh(C₆H₄)}(CO)₈ (1), Ru₄(μ-H){μ₃-PPh₂(nap)PPh(C₆H₄)}(μ-CO)₃(CO)₇ (2) and Ru₄(μ-H)(μ₃-C₆H₄){μ-PPh(nap)PPh₂}(CO)₁₁ (3) (in refluxing thf), and Ru₄{μ₄-P(nap)PPh₂}(μ₄-C₆H₄)(μ-CO)(CO)₉ (4) (in refluxing toluene) which have been characterised by single crystal X-ray studies. They have been formed by aryl C-H and aryl C-P bond cleavage reactions, presumably from an initial (unobserved) chelate dppn complex. The unchanged chelating ligand is found in Ru₃(μ-dppm)(CO)₈(dppn) (5), obtained from Ru₃(μ-dppm)(CO)₁₀ and dppn in refluxing thf.     

The syntheses, structures and redox properties of phosphine-gold(I) and triruthenium-carbonyl cluster derivatives of tolans

The syntheses of several ethynyl-gold(I)phosphine substituted tolans (1,2-diaryl acetylenes) of general form [Au(CCC₆H₄CCC₆H₄X)(PPh₃)] are described [X = Me (2a), OMe (2b), CO₂Me (2c), NO₂ (2d), CN (2e)]. These complexes react readily with [Ru₃(CO)₁₀(μ-dppm)] to give the heterometallic clusters [Ru₃(μ-AuPPh₃)(μ-η¹,η²-C₂C₆H₄CCC₆H₄X)(CO)₇(μ-dppm)] (3a-e). The crystallographically determined molecular structures of 2b, 2d, 2e and 3a-e are reported here, that of 2a having been described on a previous occasion. Structural, spectroscopic and electrochemical studies were conducted and have revealed little electronic interaction between the remote substituent and the organometallic end-caps.     

Short-bite aminobis(phosphonite) containing olefinic functionalities, PhN{P(OC6H3(OMe-o)(C3H5-p))2}2: Synthesis and transition metal complexes

Short-bite aminobis(phosphonite) containing olefinic functionalities, PhN{P(OC₆H₃(OMe-o)(C₃H₅-p))₂}₂ (1) was synthesized by reacting PhN(PCl₂)₂ with eugenol in the presence of triethylamine. The ligand 1 acts as a bidentate chelating ligand toward metal complexes [M(CO)₄(C₅H₁₀NH)₂] forming [M(CO)₄{η²-PhN{P(OC₆H₃(OMe-o)(C₃H₅-p))₂}₂}] (M = Mo, 2; W, 3). The reaction between 1 and [CpFe(CO)₂]₂ leads to the cleavage of one of the P-N bonds due to the metal assisted hydrolysis to give a mononuclear complex [CpFe(CO){P(O)(OC₆H₃(OMe-o)(C₃H₅-p))₂}{PhN(H)(P(OC₆H₃(OMe-o)(C₃H₅-p))₂)}] (4). Treatment of 1 with gold(I) derivative, [AuCl(SMe₂)] resulted in the formation of a dinuclear complex, [(AuCl)₂{PhN{P(OC₆H₃(OMe-o)(C₃H₅-p))₂}₂}] (5) with a Au···Au distance of 3.118(2) Å indicating the possibility of aurophilic interactions. An equimolar reaction between 1 and [Ru(η⁶-p-cymene)Cl₂]₂ afforded a tri-chloro-bridged bimetallic complex [(η⁶-p-cymene)Ru(μ-Cl)₃Ru{PhN(P(OC₆H₃(OMe-o)(C₃H₅-p))₂)₂}Cl] (6). The crystal structures of 1-3 and 5 were established by single crystal X-ray diffraction studies.     

Synthesis of [SnPh2(SR)2] SR = SC6F4-4-H, SC6F5: Reactivity towards group 10 transition metal complexes

The organometallic tin(IV) complexes [SnPh₂(SR^F)₂] SR^F = ⁻SC₆F₄-4-H (1), ⁻SC₆F₅ (2), were synthesized and their reactivity with [MCl₂(PPh₃)₂] M = Ni, Pd and Pt explored. Thus, transmetallation products were obtained affording polymeric [Ni(SR^F)(μ-SR^F)]_n, monomeric cis-[Pt(PPh₃)₂(SC₆F₄-4-H)₂] (3) and cis-[Pt(PPh₃)₂(SC₆F₅)₂] (4) and dimeric species [Pd(PPh₃)(SC₆F₄-4-H)(μ-SC₆F₄-4-H)]₂ (5) and [Pd(PPh₃)(SC₆F₅)(μ-SC₆F₅)]₂ (6) for Ni, Pt and Pd, respectively. The crystal structures of complexes 1, 2, 3, 4 and 6 were determined.     

Hyponitrite complexes: Crystal and molecular structure of [Ru2(CO)4(μ-PBu2)(μ-Ph2PCH2PPh2)(μ-η-ONNOMe)]

The new trans-hyponitrite derivative complex [Ru₂(CO)₄(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNOMe)] (2, dppm = Ph₂PCH₂PPh₂) was prepared by deprotonation of [Ru₂(CO)₄(μ-H)(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNOMe)][BF₄] (1) with the base DBU (1.8-diazabicyclo[5.4.0]undec-7-ene). The latter complex salt has been obtained in an improved synthesis starting from the trans-hyponitrite complex [Ru₂(CO)₄(μ-H)(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNO)]. Compound 2 has been characterized by spectroscopic methods as well as by X-ray diffraction and represents the first neutral complex bearing a deprotonated monoester of the hyponitrous acid as the bridging ligand.     

Dinuclear triply bridged copper(II)-carboxylato compounds with different bischelating ligands: Synthesis, crystal structure, spectroscopic and magnetic properties

Three new triply bridged dinuclear copper(II) compounds containing carboxylato bridges, [Cu₂(μ-CH₃COO-κ-O¹,O²)₂(μ-CH₃COO-κ-O¹)(dpyam)₂](BF₄) (1), [Cu₂(μ-CH₂CH₃COO-κ-O¹,O²)(μ-OH)(μ-OH₂)(bpy)₂](ClO₄)₂ (2) and [Cu₂(μ-CH₃COO-κ-O¹,O²)(μ-OH)(μ-OH₂)(phen)₂](ClO₄)₂ (3) (in which dpyam = di-2-pyridylamine, bpy = 2,2-bipyridine, phen = phenanthroline), have been synthesized in order to investigate the magnetic super-exchange pathway between coupled copper(II) centres. All three compounds display a distorted square-pyramidal arrangement around each copper(II) ion with a CuN₂O₃ chromophore. Compound 1 has three acetato bridges, two of which connect each square pyramid at two equatorial sites in a triatomic bridging mode and the third acetato bridge acts at the apical site in the monoatomic bridging mode. The structures of compounds 2 and 3 are mutually similar. In each dinuclear unit, both copper(II) ions are linked at two equatorial positions through a hydroxo bridge and a triatomic carboxylato bridge and at the axial position through a water molecule.The magnetic susceptibility measurements, measured from 5 to 300 K, revealed an antiferromagnetic interaction between the Cu(II) ions in compound 1 and a ferromagnetic interaction for compounds 2 and 3 with singlet-triplet energy gaps (J) of −56, 149 and 120 cm⁻¹, for compounds 1, 2 and 3, respectively.     

6-Halogenopyridin-2-olato complexes with the diruthenium(2+) core: Equilibria between head-to-head and head-to-tail structures

The dinuclear bis(6-X-pyridin-2-olato) ruthenium complexes [Ru₂(μ-XpyO)₂(CO)₄(PPh₃)₂] (X = Cl (4B) and Br (5B)), [Ru₂(μ-XpyO)₂(CO)₄(CH₃CN)₂] (X = Cl (6B), Br (7B) and F (8B)) and [Ru₂(μ-ClpyO)₂(CO)₄(PhCN)₂] (9B) were prepared from the corresponding tetranuclear coordination dimers [Ru₂(μ-XpyO)₂(CO)₄]₂ (1: X = Cl; 2: X = Br) and [Ru₂(μ-FpyO)₂(CO)₆]₂ (3) by treatment with an excess of triphenylphosphane, acetonitrile and benzonitrile, respectively. In the solid state, complexes 4B-9B all have a head-to-tail arrangement of the two pyridonate ligands, as evidenced by X-ray crystal structure analyses of 4B, 6B and 9B, in contrast to the head-to-head arrangement in the precursors 1-3. A temperature- and solvent-dependent equilibrium between the yellow head-to-tail complexes and the red head-to-head complexes 4A-7A and 9A, bearing an axial ligand only at the O,O-substituted ruthenium atom, exists in solution and was studied by NMR spectroscopy. Full ¹H and ¹³C NMR assignments were made in each case. Treatment of 1 and 2 with the N-heterocyclic carbene (NHC) 1-butyl-3-methylimidazolin-2-ylidene provided the complexes [Ru₂(μ-XpyO)₂(CO)₄(NHC)], X = Cl (11A) or Br (12A). An XRD analysis revealed the head-to-head arrangement of the pyridonate ligands and axial coordination of the carbene ligand at the O,O-substituted ruthenium atom. The conversion of 11A and 12A into the corresponding head-to-tail complexes was not possible.