Supramolecular assemblies of new 2-D complexes: Syntheses, crystal structures, spectroscopic and magnetic properties of {[MnAu2(CN)4(NITpPy)2(H2O)2]}n and {[Co(N(CN)2)2(NITpPy)2(H2O)2]}n

Two new complexes, {[MnAu₂(CN)₄(NITpPy)₂(H₂O)₂]}_n (1) and {[Co(N(CN)₂)₂(NITpPy)₂(H₂O)₂]}_n (2), have been synthesized and characterized. The single-crystal X-ray analysis for the complexes 1 and 2 demonstrates that each M(II) (M = Mn or Co) ion assumes a distorted octahedral MN₄O₂ coordination polyhedron. Four nitrogen atoms come from the cyanide groups and the pyridyl rings in a common plane, and two oxygen atoms come from the H₂O molecules in trans-positions. The structures of complexes 1 and 2 illustrate that aurophilicity and/or hydrogen bonding interactions play important roles in increasing dimensionality. Magnetic investigations on complexes 1 and 2 show the presence of weak antiferromagnetic interactions.     

Versatile coordination behaviour of Ph2AsCH2AsPh2 with Ru(II)

Treatment of ‘RuCl₃ · 3H₂O’ with Ph₂AsCH₂AsPh₂ (dpam) in hot EtOH gives either trans-[RuCl₂(dpam-As,As′)(dpam-As)₂] (1), or cis-[RuCl₂(dpam-As,As′)₂] (2), depending on the mole ratio. On exposure to light, solutions of 2 isomerise to trans-[RuCl₂(dpam-As,As′)₂] (3). Treatment of [RuCl₂(PPh₃)₃] with two equivalents of dpam in CH₂Cl₂ gave a mixture of two products, from which trans-[RuCl₂(PPh₃) (dpam-As,As′)(dpam-As)] (4) was isolated by recrystallisation. The crystal structures of 1-4 are reported. Complexes 1-3 in CH₂Cl₂ undergo electrochemical oxidation to Ru(III), and the Ru(III) form of 2 undergoes isomerisation on the voltammetric timescale to the Ru(III) form of 3.     

Spectral properties and bio-activity of copper(II) clofibriates, part III: crystal structure of Cu(clofibriate)2(2-pyridylmethanol)2, Cu(clofibriate)2(4-pyridylmethanol)2(H2O) dihydrate, and Cu2(clofibriate)4(N,N-diethylnicotinamide)2

New copper(II) clofibriates (clof, {2-(4-chlorophenoxy)-2-methylpropionic or 2-(4-chlorophenoxy)isobutyric acid}) of composition Cu(clof)₂L₂ (where L=2-pyridylmethanol (2-pymeth) (1), N-methylnicotinamide (Menia) (4), N,N-diethylnicotinamide (Et₂nia) (5), isonicotinamide (isonia) (7) or methyl-3-pyridylcarbamate (mpc) (8)), [Cu(clof)₂(4-pymeth)₂(H₂O)] · 2H₂O (4-pymeth=4-pyridylmethanol) (2 · 2H₂O) and Cu(clof)₂L (where L=4-pymeth (3) or Et₂nia (6)) have been prepared and spectroscopically characterized. All the Cu(clof)₂L₂ compounds seem to possess distorted octahedral copper(II) stereochemistry with differing tetragonal distortions. An X-ray analysis of 1 was carried out and it featured a tetragonal-bipyramidal geometry around the copper(II) atom. X-ray analysis of 2 · 2H₂O featured a square-pyramidal geometry around copper(II) atom. Both the Cu(clof)₂L compounds seem to consist of a binuclear unit of tetracarboxylate type bridging. An X-ray analysis of 6 revealed typical binuclear paddle-wheel type structure, consisting of two copper(II) atoms in square-pyramidal geometry bridged by four carboxylate anions in the xy-plane. All complexes under study were characterized by EPR and electronic spectroscopy. The antimicrobial effects have been tested on various strains of bacteria, yeasts and filamentous fungi.     

Synthesis and structural characterization of trans-[Mo2(H2DMepyF)2(CH3CN)4](BF4)6 (HDMepyF=N,N-di(6-methyl-2-pyridyl)formamidine)

Reaction of Mo₂(O₂CCH₃)₂(DMepyF)₂ (HDMepyF=N,N^′-di(6-methyl-2-pyridyl)formamidine) with HBF₄ in CH₂Cl₂/CH₃CN afforded the complex trans-[Mo₂(H₂DMepyF)₂(CH₃CN)₄](BF₄)₆ (1), which crystallized in two forms, trans-[Mo₂(H₂DMepyF)₂(CH₃CN)₄](ax-CH₃CN)₂(BF ₄)₆ · 2CH₃CN (1a), and trans- [Mo₂(H₂DMepyF)₂(CH₃CN)₄](ax-BF₄) ₂(BF₄)₄ · 2CH₃CN (1b). The molecular structures of complexes (1) consist of two quadruply bonded molybdenum atoms, which are spanned by two trans-bridging formamidinate ligands and coordinated by four trans-CH₃CN. Each H₂DMepyF⁺ ligand adopts an s-cis,s-cis- conformation. The difference between 1a and 1b is that complex 1a contains two CH₃CN molecules as axial ligands, while 1b contains two BF₄⁻ anions as axial ligands. Complex 1 is the first dimolybdenum complex containing a pair of trans bridging ligands and two pairs of trans-CH₃CN ligands.     

Substitution reactions of tetrahydrofuran in [Cr(thf)3Cl3] with mono and bidentate N-donor ligands: X-ray crystal structures of [Cr(bipy)(OH2)Cl3] and [HpyNH2][Cr(bipy)Cl4]

Substitution of thf ligands in [Cr(thf)₃Cl₃] and [Cr(thf)₂(OH₂)Cl₃] was investigated. 2,2′-Bipyridine (bipy) was reacted with [Cr(thf)₃Cl₃] to form [Cr(bipy)(thf)Cl₃] (1), which was subsequently reacted with water to give [Cr(bipy)(OH₂)Cl₃] (2). Reaction of 1 with acetonitrile (CH₃CN), pyridine (py) and pyridine derivatives to form [Cr(bipy)(L)Cl₃] (L = CH₃CN 3, py 4 and 4-pyR with R = NH₂5, Bu^t6 and Ph 7). In addition, the substitution of bipy in [Cr(thf)₃Cl₃] was followed by ¹H NMR spectroscopy at room temperature, which showed completion of the reaction in ca. 100 min. Complex 2 was characterised by single crystal X-ray diffraction. The theoretical powder diffraction pattern of 2 was compared to the experimentally obtained powder X-ray diffraction pattern, and shows excellent agreement. The dimer [Cr₂(bipy)₂Cl₄(μ-Cl)₂] was cleaved asymmetrically to give the anionic complex [Cr(bipy)Cl₄]⁻ (8) and [Cr(bipy)₂Cl₂]⁺ (9). Complexes 8 and 9 were characterised by single crystal X-ray diffraction.     

Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Reactions of [Os3(CO)10(MeCN)2] with ethynyl thiophenes: The formation of linked clusters

The reaction of 2 equiv. of [Os₃(CO)₁₀(MeCN)₂] with R-CC-L-CC-R (R = H, L = (C₄H₂S); R = SiMe₃, L = (C₄H₂S-C₄H₂S), (C₄H₂S-C₄H₂S-C₄H₂S), (C₄H₂S)-(C₁₄H₈)-(C₄H₂S)) affords the series of linked clusters [{Os₃(CO)₁₀}(HCC(C₄H₂S)CCH){Os₃(CO)₁₀}] (1), [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S-C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (2), [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S-C₄H₂S-C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (4) and [{Os₃(CO)₁₀}(Me₃SiCC(C₄H₂S)-(C₁₄H₈)-(C₄H₂S)CCSiMe₃){Os₃(CO)₁₀}] (6) as the major products. The complexes have been characterised by a range of spectroscopic methods and, in the case of 1 and 2 by single crystal X-ray crystallography. The alkyne groups cap the osmium triangles in the expected μ₃-η²-||-bonding mode and each triangle is coordinated by nine terminal and one μ₂-carbonyl group. Solution UV-Vis spectra of the complexes were similar to those observed for the free ligands consistent with there being little delocalisation between the cluster units and the thiophene groups.     

New aryl phosphinite ligands avoiding ortho-metallation: Synthesis and molecular structures of trans-[PdCl2(PPh2OR)2] and trans-[Rh(CO)Cl(PPh2OR)2] (R = 2,4,6-Me3C6H2; 2,6-Ph2C6H3)

The new aryl phosphinites PPh₂OR (R = 2,4,6-Me₃C₆H₂, 1; R = 2,6-Ph₂C₆H₃, 2) have been prepared from chlorodiphenylphosphine and the corresponding phenols. In these ligands, the ortho-positions of the aromatic phosphite function are blocked by methyl and phenyl substituents, which allows coordination to metal centres without ortho-metallation. Thus, reaction with [PdCl₂(cod)] leads to the complexes trans-[PdCl₂(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 3; R = 2,6-Ph₂C₆H₃, 4), while the reaction with [Rh₂(CO)₄Cl₂] gives trans-[Rh(CO)Cl(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 5; R = 2,6-Ph₂C₆H₃, 6). The single-crystal X-ray structure analyses of 3 and 5 confirm the trans-coordination of the new ligands in these square-planar complexes.     

Syntheses and X-ray structures of a series of V2S4(RCS2)4 (R=alkoxy, dialkylamino) complexes

A simple synthetic procedure leading to the V₂(S₂)₂(RCS₂)₄ species (R=Et₂N (1), cyclo-C₄H₈N (2), n-Bu₂N (3), EtO (4), i-PrO (5)) has been developed. X-ray structures of 3 and 5 have been reported, featuring the centrosymmetric molecules with VV distances 2.850(3) Å for 3 and 2.838(2) Å for 5.The FAB mass spectra were recorded. In all cases molecular peaks are observed. Fragmentation patterns are discussed.     

Coordination polymers of Cu(II) and Cd(II) with bifunctional chelates of the type dipicolylamino-alkylcarboxylate, (NC5H4CH2)2N(CH2)nCO2H (n = 1, 2, 3 and 4)

A series of bifunctional chelates of the type dipicolylamino-alkylcarboxylate (NC₅H₄CH₂)₂N(CH₂)_nCO₂H (n = 1-4; HL¹-HL⁴, respectively) has been prepared. Reactions of the ligands in aqueous methanol/N,N-dimethylformamide with the appropriate Cu(II) salts yielded the compounds [CuL¹](NO₃)·H₂O (1·H₂O), [CuL²(H₂O)]BF₄·H₂O (2·H₂O), [Cu(HL³)(SO₄)]₂ (3) and [CuL⁴(NO₃)]·MeOH (4·MeOH). While compounds 1, 2 and 4 are one-dimensional, the detailed connectivities within the chains are quite distinct, depending on factors such as alkyl chain length and ligation of aqua ligands or anionic components. In contrast to 1, 2 and 4, the structure of 3 is molecular, a binuclear assembly of edge-sharing Cu(II) ‘4+2’ distorted octahedra. The Cd(II) species, [{CdL²}₂(SO₄)]·4H₂O (5·4H₂O), prepared from HL² and CdSO₄·nH₂O in aqueous methanol/N,N-dimethylformamide, is two-dimensional, with a network constructed from binuclear units of seven coordinate Cd(II), , linked through bridging SO₄²⁻ groups to produce an assembly of linked hexagonal rings [{CdL²}₂(SO₄)]₆.     

Addition compounds of MoO2Cl2 with chiral sulfoxides. First molecular structures of dioxomolybdenum complexes bearing chiral non-racemic sulfoxide as ligand

MoO₂Cl₂(L)₂ [L = (R)-(+)-methyl-p-tolylsulfoxide (R-MeTolSO) (1), methyl-p-tolylsulfoxide (MeTolSO) (2), 2-benzenesulfinyl-1,1-diphenylethanol (BSDPE) (3), 1-benzenesulfinyl-2-methyl-2-propanol (BSMP) (4), benzenesulfinylmethyl 4-methylphenyl ketone (BSMMPK) (5)], and MoO₂Cl₂(L) [L = BSDPE (6), BSMP (7), BSMMPK (8), (S,S)-bis(p-tolylsulfinyl)methane (S,S-TolSOCH₂SOTol) (9), bis(methylsulfinyl)methane (MeSOCH₂SOMe) (10), bis(phenylsulfinyl)methane (PhSOCH₂SOPh) (11)] have been synthesized by reacting a solution of MoO₂Cl₂(H₂O)₂ in diethyl ether with the corresponding ligand. The crystal and molecular structures of 1, 2, and 9 have been established by X-ray diffraction analysis. The ability of 1 and 9 as catalysts for the enantioselective reduction of sulfoxides to sulphides and the oxidation of sulphides to sulfoxides has been examined.     

Analysis of the main structural trends for biscyclometalated dinuclear rhodium compounds of general formula Rh2(O2CR)2(PC)2 · 2H2O

A new series of biscyclometalated dinuclear rhodium (II) compounds with the general formula Rh₂(O₂CR)₂(PC)₂ · 2H₂O, being PC = (C₆H₄)P(C₆H₅)₂, R = CH₃ (1 · 2H₂O), PC = [(p-CH₃ OC₆H₃)P(p-CH₃ OC₆H₄)₂], R = CF₃ (2 · 2H₂O), PC = (C₆H₄)P[CH(CH₃)₂]₂, R = CH₃ (3 · 2H₂O) and PC = (C₆H₄)P(C₆H₅)₂, R = C₆F₅ (4 · 2H₂O) has been obtained. The crystal structures for these compounds have been determined by X-ray diffraction and the main structural trends, bond lengths, bond angles and torsion angles have been analyzed, and have also been compared with the structural parameters for different analogous complexes described previously in the literature.     

Synthesis, structure and reactivity of complexes containing [M(S2)2] fragments (M=Ru, Os; (S2)=1,2-benzenedithiolate (2−))

Subsequent addition of 1,2-benzenedithiol (S₂-H₂) and nBuLi to a solution of [Ru(NO)Cl₃ · xMeOH] in THF afforded exclusively the monomeric species NBu₄[Ru^II(NO)(S₂)₂] (1). Formation of dimeric (NBu₄)₂[Ru^II(NO)(S₂)₂]₂ (2) has been confirmed when the deprotonated ligand S₂-Li₂ was added to [Ru(NO)Cl₃ · xMeOH] and allowed to stir for 30 h. The monomer 1 undergoes aerial oxidation to give (NBu₄)₂[Ru^IV(S₂)₃] (3). The reaction between RuCl₃ · xH₂O and S₂-H₂ in the presence of NaOMe, afforded the dinulear Ru^III species (NMe₄)₂[Ru^III(S₂)₂]₂ (4). A modified method for the preparation of 1 is being employed to synthesize the osmium analogue NBu₄[Os(NO)(S₂)₂] (5) effectively. The solid state structures of 1, 2 and 3 were determined by X-ray crystal structure analysis. A comparison of relevant bond distance data suggests that 1,2-benzenedithiolate acts as an “innocent” ligand.     

Short-bite aminobis(phosphonite) containing olefinic functionalities, PhN{P(OC6H3(OMe-o)(C3H5-p))2}2: Synthesis and transition metal complexes

Short-bite aminobis(phosphonite) containing olefinic functionalities, PhN{P(OC₆H₃(OMe-o)(C₃H₅-p))₂}₂ (1) was synthesized by reacting PhN(PCl₂)₂ with eugenol in the presence of triethylamine. The ligand 1 acts as a bidentate chelating ligand toward metal complexes [M(CO)₄(C₅H₁₀NH)₂] forming [M(CO)₄{η²-PhN{P(OC₆H₃(OMe-o)(C₃H₅-p))₂}₂}] (M = Mo, 2; W, 3). The reaction between 1 and [CpFe(CO)₂]₂ leads to the cleavage of one of the P-N bonds due to the metal assisted hydrolysis to give a mononuclear complex [CpFe(CO){P(O)(OC₆H₃(OMe-o)(C₃H₅-p))₂}{PhN(H)(P(OC₆H₃(OMe-o)(C₃H₅-p))₂)}] (4). Treatment of 1 with gold(I) derivative, [AuCl(SMe₂)] resulted in the formation of a dinuclear complex, [(AuCl)₂{PhN{P(OC₆H₃(OMe-o)(C₃H₅-p))₂}₂}] (5) with a Au···Au distance of 3.118(2) Å indicating the possibility of aurophilic interactions. An equimolar reaction between 1 and [Ru(η⁶-p-cymene)Cl₂]₂ afforded a tri-chloro-bridged bimetallic complex [(η⁶-p-cymene)Ru(μ-Cl)₃Ru{PhN(P(OC₆H₃(OMe-o)(C₃H₅-p))₂)₂}Cl] (6). The crystal structures of 1-3 and 5 were established by single crystal X-ray diffraction studies.     

Ru2(CO)4(OOCR)2L2 sawhorse-type complexes containing axial 5-(4-pyridyl)-10,15,20-triphenylporphyrin ligands

The thermal reaction of Ru₃(CO)₁₂ with various carboxylic acids (benzoic, 4-hydroxyphenylacetic, ferrocenic, stearic, oleic, 4-(octadecyloxy)benzoic) in refluxing tetrahydrofuran, followed by addition of 5-(4-pyridyl)-10,15,20-triphenylporphyrin (L), gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂L₂ (1: R = -C₆H₅, 2: R = -CH₂-p-C₆H₄OH, 3: R = -C₅H₄FeC₅H₅, 4: R = -(CH₂)₁₆CH₃, 5: R = -(CH₂)₇CHCH(CH₂)₇CH₃, 6: R = -p-C₆H₄O(CH₂)₁₇CH₃). Complexes 1-6 were characterised by IR, NMR, and ESI-MS as well as by elemental analysis. The UV-Vis spectra show the Soret band centred at 417 nm and the Q bands at 515, 550, 590 and 645 nm, respectively.     

Carbon-hydrogen bond activation of phenyldi(2-thienyl)phosphine at a triosmium cluster centre

The phenyldi(2-thienyl)phosphine (PhPTh₂) complexes [Os₃(CO)_12−n(PhPTh₂)_n] (n = 1-3) (1-3) have been prepared. Thermolysis of 1 and either 2 or 3 in octane affords carbon-hydrogen bond activation products [Os₃(CO)₉{μ₃-PPhTh(C₄H₂S)}(μ-H)] (4) and [Os₃(CO)₈(PPhTh₂){μ₃-PPhTh(C₄H₂S)}(μ-H)] (5), respectively. Both exist as isomeric mixtures differing in the relative positions of phenyl and thienyl substituents with respect to the triosmium centre. The nature of the process has been confirmed by a single crystal X-ray diffraction analysis of 4.     

Selective synthesis of triangular cluster oxido-sulfidocomplexes of Mo and W: High yield preparations of [Mo3O2S2(H2O)9], [W3O2S2(H2O)9], [W2MoO2S2(H2O)9] and their derivatization

Reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ or metallic Mo under hydrothermal conditions (140 °C, 4 M HCl) gives oxido-sulfido cluster aqua complex [Mo₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (1). Similarly, [W₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (2) is obtained from [W₂O₂(μ-S)₂(H₂O)₆]²⁺ and W(CO)₆. While reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with W(CO)₆ mainly proceeds as simple reduction to give 1, [W₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ produces new mixed-metal cluster [W₂Mo(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (3) as main product. From solutions of 1 in HCl supramolecular adduct with cucurbit[6]uril (CB[6]) {[Mo₃O₂S₂(H₂O)₆Cl₃]₂CB[6]}Cl₂⋅18H₂O (4) was isolated and structurally characterized. The aqua complexes were converted into acetylacetonates [M₃O₂S₂(acac)₃(py)₃]PF₆ (M₃ = Mo₃, W₃, W₂Mo; 5a-c), which were characterized by X-ray single crystal analysis, electrospray ionization mass spectrometry and ¹H NMR spectroscopy. Crystal structure of (H₅O₂)(Me₄N)₄[W₃(μ₃-S)(μ₂-S)(μ₂-O)₂(NCS)₉] (6), obtained from 2, is also reported.     

Cu(II) complexes with square pyramidal (N2S)CuCl2 chromophore: Jahn-Teller distortion and subsequent effect on spectral and structural properties

One monomeric neutral Cu(II) complex [(pmtpm)CuCl₂] (1) is reported by Lindoy and Livingstone [8]. Two new complexes namely, μ-Cl bridged binuclear Cu(II) complex [{(pmtpm)Cu(Cl)}₂ μ-Cl](ClO₄) (2) and a bis μ-Cl bridged binuclear Cu(II) complex [{(pmtpm)Cu}₂(μ-Cl)₂](ClO₄)₂ (3) derived from a tridentate Schiff base ligand, 2-pyridyl-N-(2′-methylthiophenyl)methyleneimine (pmtpm) were synthesized and characterized by various spectroscopic methods and by X-ray crystallography. (N₂S)CuCl₂ chromophore(s) of distorted square pyramidal coordination geometries around Cu(II) ion(s) have been observed for all the complexes 1-3. The equatorial sites of the square plane comprise two N and a thioether S donor atoms of the pmtpm ligand as well as one Cl⁻ ion (terminal in 1 and 2, and bridging in 3) while the remaining axial site is occupied by a terminal Cl⁻ ion (for 1) or a bridging Cl⁻ ion (for 2 and 3). The equatorial Cu-Cl distances are much shorter [1: 2.2511(4) Å, 2: 2.2307(12) Å, 3: 2.2513(12) Å] than the axial Cu-Cl distances [1: 2.4394(4) Å, 2: 2.5597(9) Å, 3: 2.7037(12) Å]. The correlation of an axial Cu-Cl bond elongation with a lower g_|| value in the solid state EPR spectrum and a blue shifted ligand field transition in the solid and solution phase absorption spectrum has been observed.     

Heterobimetallic Fe-Pd and Fe-Pt NCN pincer complexes (NCN = [C6H2(CH2NMe2)2-2,6])

The meta-diaminoaryl ferrocenes Fc-NCN-H (3) and Fc-CC-NCN-H (5) (Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe, NCN-H = C₆H₃(CH₂NMe₂)₂-3,5) can be used as precursors in the preparation of heterobimetallic transition metal complexes of structural type Fc-NCN-MX (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]⁻; MX = PdCl (7), PtCl (8), PtI (9)) and Fc-CC-NCN-MX (MX = PdCl (11), PdI (12), PtCl (13)), respectively. They are accessible by applying different synthesis procedures, including oxidative addition and metallation-transmetallation processes.Cyclovoltammetric studies show that the ferrocene moieties in 3, 5, 7-9 and 11-13 can reversibly be oxidised. The potential of the Fe(II)/Fe(III) redox couple decreases with increasing electron density at the NCN pincer unit. The use of 8 as a possible (electro)chemical sensor in the detection of SO₂ is discussed as well.The solid-state structures of 8 and 13 are reported. The crystals of 8 contain two molecules of 8 in the asymmetric unit. The plane of the C₆H₂ moiety is with 27.2(3)° and 38.2(3)° tilted towards the C₅H₄ entity, while in 13 an angle of 45.9(3)° can be found. The d⁸-electron configured platinum atoms possess a somewhat distorted square-planar surrounding, setup by two Me₂NCH₂ortho-substituents, the NCN C_ipso carbon atom and the chloride ligand.     

A trinuclear copper(II) complex with 2,5-pyridine-dicarboxylato bridges - [Cu3(2,5-pydc)2(Me5dien)2(H2O)2(BF4)2] · H2O: Synthesis, crystal structure and magnetic properties

A trinuclear copper(II) complex, [Cu₃(2,5-pydc)₂(Me₅dien)₂(BF₄)₂(H₂O)₂] · H₂O 1, has been constructed from 2,5-pyridine-dicarboxylato bridges (2,5-pydc²⁻) and N,N,N′,N″,N″-pentamethyl-diethylenetriamine (Me₅dien) acting as a blocking ligand. The copper ions, within the centrosymmetric trinuclear cations, are connected by two 2,5-pydc²⁻ bridges, with an intramolecular Cu···Cu separation of 8.432 Å. The central copper ion exhibits an elongated octahedral geometry, with semicoordinated ions, while the terminal ones are pentacoordinated (distorted square-pyramidal geometry). The cryomagnetic investigation of 1 reveals an antiferromagnetic coupling of the copper(II) ions (J = −5.9 cm⁻¹, H = −JS_Cu1S_Cu2 − JS_Cu2S_Cu1a).