Rhenium(III) and technetium(III) complexes with 2-mercapto-1,3-azole ligands and X-ray crystal structures

Reactions of labile [MCl₃(PPh₃)₂(NCMe)] (M = Tc, Re) precursors with 1H-benzoimidazole-2-thiol (H₂L¹), 5-methyl-1H-benzoimidazole-2-thiol (H₂L²) and 1H-imidazole-2-thiol (H₂L³), in the presence of PPh₃ and [AsPh₄]Cl gave a new series of trigonal bipyramidal M(III) complexes [AsPh₄]{[M(PPh₃)Cl(H₂L^1-3)₃]Cl₃} (M = Re, 1-3; M = Tc, 4-6). The molecular structures of 1 and 3 were determined by X-ray diffraction. When the reactions were carried out with benzothiazole-2-thiol (HL⁴) and benzoxazole-2-thiol (HL⁵), neutral paramagnetic monosubstituted M(III) complexes [M(PPh₃)₂Cl₂(L^4,5)] (M = Re, 8, 9; M = Tc, 10, 11) were obtained. In these compounds, the central metal ions adopt an octahedral coordination geometry as authenticated by single crystal X-ray diffraction analysis of 8 and 11. Rhenium and technetium complexes 1, 4 and rhenium chelate compounds 8, 9 have been also synthesized by reduction of [MO₄]⁻ with PPh₃ and HCl in the presence of the appropriate ligand. All the complexes were characterized by elemental analyses, FTIR and NMR spectroscopy.     

New rhodium complexes of the tetradentate ligand bis(diacetylmonoxime-imino)propane 1,3 (H2dopn): synthesis and crystal structure of trans-[Rh(Hdopn)Cl]2 and trans-[Rh(Hdopn)(I)2]

The reaction between [Rh(H₂O)₆](ClO₄)₃ and the monoanion Hdopn⁻ (H₂dopn=bis(diacetylmonoxime-imino)propane 1,3=3,9-dimethyl-4,8-diazaundeca-3,8-diene-2,10-dione dioxime) afforded a new dimeric rhodium(II) compound of formula [Rh(Hdopn)(H₂O)]₂(ClO₄)₂ · H₂O (1). Treatment of methanolic solution of 1 with NaX (X=Cl⁻, Br⁻, I⁻) results in the replacement of water with halides in 1, leading to the formation of [Rh(Hdopn)X]₂ rhodium(II) dimers. The X-ray crystal structure of [Rh(Hdopn)Cl]₂ · 0.5H₂O (2) was determined showing a [Rh(II)-Rh(II)] core. Upon the reaction of 1 with NaI carried out in air, [Rh(Hdopn)(I)₂] (3) was isolated and characterized by a single-crystal X-ray diffraction analysis.     

Synthesis and structures of copper and gold complexes of the P,N ligands RNC(Bu)C(H)RPPh2 (R = SiMe3, H)

The reaction of the chelating P,N ligand RNC(Bu^t)CH(R)PPh₂ (R = SiMe₃) (1) with CuCl and CuCl₂ (probably by way of reduction to Cu(I) by the phosphine ligand) or Cu(NCCH₃)₄ClO₄ yielded the dimeric 1:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}Cl]₂ (2) or the monomeric 2:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}₂]ClO₄ (3), respectively. The presence of trace amounts of water during the reaction resulted in the successive cleavage of the two trimethylsilyl groups of the ligand and the formation of the monomeric chelate complexes [Cu{PPh₂CH(R)C(Bu^t)NH}₂]ClO₄ (4) and [Cu{PPh₂CH₂C(Bu^t)NH}₂]ClO₄ (5). Oxidation of 5 by atmospheric oxygen led to small quantities of the blue Cu(II) complex [Cu{(O)PPh₂CH₂C(Bu^t)NH}₂](ClO₄)₂ (6). The dimeric gold complexes [Au{PPh₂CH₂C(Bu^t)NH}]₂X₂ (X = BF₄, ClO₄) (7) were similarly obtained from the previously described Au{PPh₂CH(R)C(Bu^t)NR}Cl by replacing the covalently bound chlorine with the weakly coordinating anions in the presence of small quantities of water. The solution and solid state structures (except 5) of all complexes were determined by NMR spectroscopy and X-ray crystallography.     

Structure-dependent spectroscopic and redox properties of copper(I) complexes with bidentate iminopyridine ligands

A series of iminopyridine ligands; cyclopropylpyridin-2-ylmethyleneamine (A), cyclopentylpyridin-2-ylmethyleneamine (B), cyclohexylpyridin-2-ylmethyleneamine (C), and cycloheptylpyridin-2-ylmethyleneamine, (D) and their copper(I) complexes, [Cu(L)₂]⁺ (1a-1d) and [Cu(L)(PPh₃)₂]⁺ (2a-2d) have been synthesized and characterized by CHN analyses, ¹H NMR and IR and UV-Vis spectroscopy. Structures of 1a, 1b, 1c and 2a were determined by X-ray crystallography. The coordination polyhedron about the Cu^I center in the complexes is best described as a distorted tetrahedron. The dihedral angles between the least-squares planes of the chelate ligands show considerable variation from 86.1° in 1a to 68.3° in 1b, indicating the importance of packing forces in the crystalline environment. The UV-Vis spectra of the complexes are characterized by first metal to ligand charge transfer bands increasing in wavelength with increasing size of the ring substituents in the ligands, except for the cyclopropyl compounds (1a and 2a), in good agreement with the variation of the dihedral angles between the ligand planes. Cyclic voltammetry of the complexes indicates a quasireversible redox behavior for the complexes. The bulkier ligands (PPh₃) inhibit the geometric distortion within the oxidized form and the redox potentials of complexes 2a-2d are shifted to more positive values, therefore.     

Hydrido iridium(III) complexes of azoaromatic ligands. Isolation, structure and studies of their physicochemical properties

Reactions of 2-(arylazo)pyridine (L^a-c) with [IrCl₃(PPh₃)₂] in two different solvents, viz. ethanol and toluene are reported. In refluxing toluene two new isomeric (mer and fac geometries) iridium complexes, having molecular formula [IrCl₃(PPh₃)(L)] (1 and 2) have been isolated. The reaction in refluxing ethanol yielded two new hydrido complexes of molecular formula [IrHCl₂(PPh₃)(L)] (3) and [IrHCl(PPh₃)₂(L)]Cl (4) along with the compound 2. All the complexes have been thoroughly characterized by NMR, UV-Vis spectroscopy, cyclic voltammetry and X-ray crystallographic analysis. The ¹H NMR spectra of the hydrido complexes 3 and 4 showed a doublet and a triplet signals at δ −20.43 and −14.82 respectively due to coupling with magnetically equivalent phosphorous nuclei. Strong trans influence of the π-acceptor ligands guided the X-ray structural parameters; bonds trans to the these ligands are unusually long. Similar elongation effect was also noted for the bonds trans to the coordinated hydrido ligand. UV-Vis-NIR spectrum consisted of multiple transitions in the UV and visible regions. Cyclic voltammetry of each of these complexes has exhibited a reductive response between −0.25 and −0.55 V, which has been assigned to azo-ligand reduction. The compound 3, however, showed a quasireversible oxidative wave near 1.45 V, due to Ir^III/Ir^IV couple.     

Linear and bent oxo-bridged dinuclear rhenium(V) complexes with terminal and bridging pyrazole ligands

The [ReOX₃(AsPh₃)(OAsPh₃)] (X = Cl or Br) complexes react with two equivalents of 3,5-dimetylopyrazole (3,5-Me₂pzH) in acetone at room temperature to give [{Re(O)X₂(3,5- Me₂pzH)₂}₂(μ-O)] (1 and 2). In the case of [ReOBr₃(AsPh₃)(OAsPh₃)], a small quantity of the dinuclear rhenium complex [{Re(O)Br(3,5-Me₂pzH)}₂(μ-O)(μ-3,5-Me₂pz)₂] (3) has been isolated next to the main product 2. Treatment of [ReOX₃(PPh₃)₂] compounds with two equivalents of 3,5-Me₂pzH in acetone at room temperature leads to the isolation of symmetrically substituted dinuclear rhenium complexes [{Re(O)X(PPh₃)}₂(μ-O)(μ-3,5-Me₂pz)₂] (4 and 5). Refluxing of [ReO(OEt)X₂(PPh₃)₂] complexes with 3,5-Me₂pzH in ethanol affords unsymmetrically substituted dinuclear rhenium [{Re(O)X(PPh₃)}(μ-O)(μ-3,5-Me₂pz)₂{Re(O)X(3,5- Me₂pzH)}] complexes (6 and 7). The complexes obtained in these reactions have been characterised by IR, UV-Vis, ¹H and ³¹P NMR. The crystal and molecular structures have been determined for 1, 2, 3, 4, 6 and 7 complexes.     

Rh(I) complexes containing tris(pyrazolyl)amine and bis(pyrazolyl)amine ligands: synthesis and NMR studies

The tris(pyrazolyl)amine ligands: tris[2-(1-pyrazolyl)methyl]amine (tpma), tris [3,5-dimethyl-1-pyrazolyl)methyl]amine (tdma), tris[2-(1-pyrazolyl)ethyl]amine (tpea), tris[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine (tdea) and bis(pyrazolyl)amine ligands: bis[2-(1-pyrazolyl)ethyl]amine (bpea) and bis[2-(3,5-dimethyl-1-pyrazolyl)ethyl]amine (bdea) react with [RhCl(cod)]₂ in presence of NaBF₄ (tpma, tdma and bdea) or AgBF₄ (tpea, tdea and bpea) to lead to [Rh(cod)L] (BF₄) (L=tpma (1), tdma (2), bdea (3), tpea (4), tdea (5) and bpea (6)). These complexes have been characterised by elemental analyses, conductivity, IR, ¹H and ¹³C NMR spectroscopy and liquid mass (with electrospray) spectrometry. The ¹H NMR spectra of 1, 2 show the presence of two isomers in solution in a 3:1 ratio (coordination κ² or κ³ type) in a thermodynamic equilibrium. The steric bulk of cyclo-octa-1,5-diene causes it to prefer the κ² mode of bonding as majority. Similar to previous published results, complexes 4 and 5 exist in a sole form in solution (probably κ² isomer). Finally, the complexes 3 and 6 are fluxional. A NMR study shows that this fluxional process is not frozen at 183 K.     

Structure, spectra and electrochemistry of ruthenium-carbonyl complexes of naphthylazoimidazole

[Ru(H)(CO)(PPh₃)₂(α/β-NaiR)](ClO₄) (3, 4) are synthesized by the reaction of [Ru(H)(Cl)(CO)(PPh₃)₃] with 1-alkyl-2-(naphthyl-α/β-azo)imidazole (α-NaiR (3); β-NaiR (4)). One of the complexes [Ru(H)(CO)(PPh₃)₂(α-NaiMe)](ClO₄) (3a) has been structurally established by X-ray diffraction study. Upon addition of Cl₂ saturated in MeCN to 3 or 4 gives [Ru(Cl)(CO)(α/β-NaiR)(PPh₃)₂](ClO₄) (for α-NaiR (5); β-NaiR (6)), without affecting metal oxidation state, which were characterized by spectroscopic measurements. The redox property of the complexes is examined by cyclic voltammetry.     

Phosphorus-carbon(pyridyl) bond cleavage on reacting diphenyl-2-pyridylphosphine with triiron dodecacarbonyl

The reaction of [Fe₃(CO)₁₂] with diphenyl-2-pyridylphosphine (PPh₂Py) in refluxing toluene for 1 h afforded three compounds, [Fe₂(CO)₆(μ-PPh₂)(μ-κ²-C,N-C₅H₄N)] (1), [Fe(CO)₄(κ¹-P-PPh₂Py)] (2), and [Fe(CO)₃(κ¹-P-PPh₂Py)₂] (3) in 23%, 10% and 3.5% yields after work-up, respectively. The PPh₂Py ligand acts as a terminal P-donor ligand in 2 and 3, while in 1 it underwent a selective phosphorus-carbon(pyridyl) bond cleavage to afford phosphido- and pyridyl-bridged ligands. The complexes were characterized by elemental analysis, FAB-mass, FTIR, ¹H and ³¹P-{¹H}NMR spectroscopies. Compounds 1 and 2 were also characterized by X-ray single crystal.     

Complexes of N-thiophosphorylthioureas RNHC(S)NHP(S)(OiPr)2 (HL) (R = pyridin-2-yl, pyridin-3-yl, 6-amino-pyridin-2-yl) with copper(I): Crystal structures of Cu(PPh3)nL (n = 1, 2)

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RNHC(S)NHP(S)(OiPr)₂ [R = pyridin-2-yl (HL^a), pyridin-3-yl (HL^b), 6-amino-pyridin-2-yl (HL^c)] with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to mononuclear [Cu(PPh₃)₂L^a,b-S,S′] (1, 2) and [Cu(PPh₃)L^c-S,S′] (3) complexes. Using copper(I) iodide instead of Cu(PPh₃)₃I, polynuclear complexes [Cu_n(L-S,S′)_n] (4-6) were obtained. The structures of these compounds were investigated by IR, ¹H, ³¹P{¹H} NMR spectroscopy, ES-MS and elemental analyses. The crystal structures of Cu(PPh₃)₂L^b (2) and Cu(PPh₃)L^c (3) were determined by single-crystal X-ray diffraction.     

Synthesis, structures, and characterization of benzildiimine complexes of rhodium(III) and iridium(I)

The reactions of trans-[(PPh₃)₂M(CO)Cl] (M = Rh and Ir) with benzildiimine (H₂BDI = 2) derived from benzil-bis(trimethylsilyl)diimine (Si₂BDI) (1) in a 1:2 and 1:1 molar ratio afforded the cationic bis-benzildiiminato complexes [Rh(PPh₃)₂(HBDI)₂]Cl (3) and the mono-benzildiimine complex [Ir(PPh₃)₂(CO)(H₂BDI)]Cl (4), respectively. Both complexes are fully characterized using IR, FAB-MS, NMR spectroscopy and elemental analysis. The single crystal X-ray structure analysis reveals a distorted octahedral coordination geometry for the Rh(III) in 3 and a highly distorted square pyramidal geometry for Ir(I) in 4. In addition, the solid-state structure of Si₂BDI is reported here for the first time showing the substituents highly twisted because of steric reasons.     

Synthesis, structures and spectroscopic properties of platinum(II), copper(I) and zinc(II) complexes bearing 4-(p-dimethylaminophenyl)-6-phenyl-2,2′-bipyridine ligand

The reactions of 4-(p-dimethylaminophenyl)-6-phenyl-2,2′-bipyridine (HL) with three metal salts of platinum(II), copper(I) and zinc(II) provide the new complexes [Pt(L)(PPh₃)]ClO₄ (1), [Cu(HL)₂]BF₄ (2), [Cu(HL)(PPh₃)]BF₄ (3) and [Zn(HL)₂](ClO₄)₂ (4). All the structures of these four complexes have been characterized by single crystal X-ray diffraction, and their spectroscopic properties were investigated. Especially for complex 1, upon protonation, the excited state can be tuned from the intraligand charge transfer (ILCT) to the metal-to-ligand charge transfer (MLCT), and such switching in the excited state is acid/base reversible. The time-dependent density functional theory (TD-DFT) calculation was used to interpret the absorption spectra of complex 1, and the calculated result is consistent with those of experiments results. In contrast with 1, the lowest energy absorption at 410-650 nm of complexes 2 and 3 can be assigned to MLCT excited state. In solid state or solution complex 4 exhibits intense photoluminescence attributed to a ILCT transition in nature.     

Synthesis and characterization of sterically hindered tris(pyrazolyl)borate Ni complexes

Addition of KTp^Ph2 to a solution of NiX₂ (X = Cl, Br, NO₃, OAc and acac) or NiBr(NO)(PPh₃)₂ in THF yields the structurally characterized series [NiCl(Hpz^Ph2)Tp^Ph2] (1) and [NiXTp^Ph2] (X = Br 2, NO 3, NO₃4, OAc 5 and acac 6) including the first example of a tris(pyrazolyl)borate nickel nitrosyl complex. IR spectroscopy confirms that all the Tp^Ph2 ligands are κ³ coordinated and that the NO ligand in 3 is linearly bound. Electronic spectra are consistent with four- or five-coordinate species in solution. NMR spectroscopic studies indicate that the complexes are paramagnetic, with the exception of 3. This is confirmed by magnetic susceptibility studies, which suggest that complexes 1, 2 and 4-6 are paramagnetic with two unpaired electrons. X-ray crystallographic studies of 5 reveal a distorted trigonal bipyramidal nickel centre with a symmetrically coordinated acetate ligand.     

Synthesis and characterization of Cu(II) and Ni(II) complexes of a tripodal ligand containing imidazoles

Two complexes of the formula [MH₃L](ClO₄)₂ [M = Cu(II) (1), Ni(II) (2)] have been prepared by the reaction of M(ClO₄)₂ · 6H₂O with the ligand (H₃L) formed by the Schiff base condensation of tris(2-aminoethyl)amine (tren) with three molar equivalents of 4-methyl-5-imidazolecarboxaldehyde and structurally and magnetically characterized. The structures of 1 and 2 are isomorphous with each other and with the iron(II) complex of H₃L which has been reported previously. The ligand, while potentially heptadentate, forms six coordinate complexes with both metal centers forming three M-N_imine and three M-N_imidazole bonds. The tren central N atom is at a nonbonded distance from M of 3.261 Å for 1 and 3.329 Å for 2. The neutral complex CuHL 3 was prepared by reaction of H₃L with Cu(OCH₃)₂ and the ionic complex Na[NiL] 4 was prepared by deprotonation of 2 with aqueous sodium hydroxide. Magnetic measurements of 1-3 are consistent with the spin-only values expected for S = 1/2 (d⁹, Cu(II)) and S = 1 (d⁸, Ni (II)) systems.     

Cd(II)-ethylenediamine mono- and bimetallic complexes - Synthesis and characterization by Cd NMR spectroscopy and single crystal X-ray diffraction

Formation of three Cd(II)-ethylenediamine (en) complexes ([Cd(en)_n]²⁺, n = 1-3) in aqueous solution and in DMSO solvent has been established by means of ¹¹³Cd NMR spectroscopy. It is clearly shown that Cd(II)-en complexes form primarily in basic solutions. A correlation between the ¹¹³Cd NMR chemical shifts and the ethylenediamine (en) coordination number has been observed and discussed. Two single crystals with the composition [Cd₂(en)₅](ClO₄)₄ (1) and [Cd(en)₃](ClO₄)₂ (2) were prepared from aqueous solution, and their structures were determined by single crystal X-ray diffraction. Cd(II) ions are coordinated by six atoms in both compounds, 1 and 2: via five N-donor atoms and one O-donor atom forming a bimetallic complex 1, and via six N-donor atoms forming a distorted octahedral monometallic complex 2. Raman spectra of complexes 1 and 2 also provide additional evidence that the cis-form of the bridging en is present in complex 1.     

Diastereoisomerically pure pyrazole-3,5-dicarboxylate-bridged dinuclear ruthenium(II) and osmium(II) complexes of 2,2-bipyridine: structural, electrochemical and spectral studies

Pyrazole-3,5-dicarboxylate-bridged dinuclear ruthenium(II) and osmium(II) complexes of 2,2^′-bipyridine of composition [(bpy)₂Ru(pzdc)Ru(bpy)₂](ClO₄) · H₂O (1) and [(bpy)₂Os(pzdc)Os(bpy)₂](ClO₄) · H₂O (2) have been obtained in high yield and have been separated to their homochiral (ΛΛ/ΔΔ) rac (1a, 2a) and heterochiral (ΛΔ/ΔΛ) meso (1b, 2b) diastereoisomers. The distinctive structural features of these diastereoisomers have been characterized by 1-D and 2-D ¹H NMR spectroscopy. The X-ray crystal structure of rac-[(bpy)₂Os(pzdc)Os(bpy)₂](ClO₄) · H₂O (2a) has been determined. The electrochemical and electronic spectral studies have established that there remain difference in properties and hence difference in intermetallic communication between the diastereoisomeric forms in each case.     

Spectroscopic and electrochemical properties of heteroleptic cationic copper complexes bis-(diphenylphosphino)alkane-(2,2′-biquinoline)copper(I). Crystal structure of bis(diphenylphosphino)ethane-(2,2′-biquinoline)copper(I) perchlorate

A series of [Cu^(I)(2,2′-biquinoline)(L)](ClO₄) complexes (L = bis(diphenylphosphino)methane (bppm), 1,2-bis(diphenylphosphino)ethane (bppe), 1,4-bis(diphenylphosphino)butane (bppb)) have been synthesized and characterized by elemental analysis, conductivity, ESI-mass, NMR and UV-Vis spectroscopies, cyclic voltammetry, X-ray diffraction ([Cu^(I)(2,2′-biquinoline)(bppe)](ClO₄)) and DFT calculations. These compounds are monometallic species in a distorted tetrahedral arrangement, in contrast with related compounds found as dinuclear according to diffraction studies. The spectroscopic properties are not directly correlated with the length of alkyl chain bridge between the bis-diphenylphosphine groups. In this way, the chemical shift of some 2,2′-biquinoline protons and the metal to ligand charge transfer (Cu to 2,2′-biquinoline) follows the order [Cu(2,2′-biquinoline)(bppm)](ClO₄), [Cu(2,2′-biquinoline)(bppb)](ClO₄), [Cu(2,2′-biquinoline)(bppe)](ClO₄). The same dependence is followed by the potentials to Cu(II)/Cu(I) couple. These results are discussed in terms of inter-phosphorus alkane chain length and tetrahedral distortions on copper.     

Structural variations and spectroscopic properties of copper(I) complexes with bis(schiff base) ligands

Six copper(I) complexes {[Cu₂(L1)(PPh₃)₂I₂] · 2CH₂Cl₂}_n (1), {[Cu₂(L2)(PPh₃)₂]BF₄}_n (2), [Cu₂(L3)(PPh₃)₄I₂] · 2CH₂Cl₂ (3), [Cu₂(L4)(PPh₃)₄I₂] (4), [Cu₂(L5)(PPh₃)₂I₂] (5) and [Cu₂(L6)(PPh₃)₂I₂] (6) have been prepared by reactions of bis(schiff base) ligands: pyridine-4-carbaldehyde azine (L1), 1,2-bis(4′-pyridylmethyleneamino)ethane (L2), pyridine-3-carbaldehyde azine (L3), 1,2-bis(3′-pyridylmethyleneamino)ethane (L4), pyridine-2-carbaldehyde azine (L5), 1,2-bis(2′-pyridylmethyleneamino)ethane (L6) with PPh₃ and copper(I) salt, respectively. Ligand L1 or L2 links (PPh₃)₂Cu₂(μ-I)₂ units to form an infinite coordination polymer chain. Ligand 3 or 4 acts as a monodentate ligand to coordinate two copper(I) atoms yielding a dimer. Ligand 5 or 6 chelates two copper(I) atoms using pyridyl nitrogen and imine nitrogen to form a dimer. Complexes 1-4 exhibit photoluminescence in the solid state at room temperature. The emission has been attributed to be intraligand π-π* transition mixed with MLCT characters.     

Stereochemical structure determination of p-cymene Ru(II) complexes containing the PPh2Py ligand with 2-D NOESY and HMQC NMR experiments

Complexes [Ru(p-cymene)Cl₂(PPh₂Py)] (1) and [Ru(p-cymene)Cl(PPh₂Py)]BF₄ (2) were studied by means of ¹H, ¹³C{¹H} 2-D NOESY and HMQC NMR spectral methods. NMR data agree with C₁ and C_s symmetries for complexes 1 and 2, respectively. NOESY cross-peaks allowed the assignment of signals to CH arene protons and in the case of complex 2 the determination of the molecular stereochemistry. These results are in agreement with the X-ray molecular structures of both complexes.     

One-pot syntheses of alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III) bearing p-cymene or pentamethylcyclopentadienyl groups

Reaction of [(p-cymene)RuCl₂(PPh₃)] (1) or [Cp^∗MCl₂(PPh₃)] (Cp^∗ = C₅Me₅) (3a: M = Rh; 4a: M = Ir) with 1-alkynes and PPh₃ were carried out in the presence of KPF₆, generating the corresponding alkenyl-phosphonio complexes, [(p-cymene)RuCl(PPh₃){CHCR(PPh₃)}](PF₆) (2a: R = Ph; 2b: R = p-tolyl) or [Cp^∗MCl(PPh₃){CHCPh(PPh₃)}](PF₆) (5: M = Rh; 6: M = Ir). Similar reactions of complexes [Cp^∗RhCl₂(L¹)] (3a: L¹ = PPh₃; 3c: L¹ = P(OMe)₃) with L² (L² = PPh₃, PMePh₂, P(OMe)₃) gave [Cp^∗RhCl(L¹)(L²)](PF₆) (7bb: L¹ = L² = PMePh₂; 7ca: L¹ = P(OMe)₃, L² = PPh₃; 7cc: L¹ = L² = P(OMe)₃). Alkenyl-phosphonio complex 5 was treated with P(OMe)₃ or 2,6-xylyl isocyanide, affording [Cp^∗RhCl(L){CHCPh(PPh₃)}](PF₆) (8a: L = P(OMe)₃; 8b: L = 2,6-xylNC). X-ray structural analyses of 2a, 6 and 8a revealed that the phosphonium moiety bonded to the C_β atom of the alkenyl group are E configuration.