Iron(III) complexes using NNS reduced Schiff bases and NNOS coordinating tetradentate ligands: Synthesis, structure and catecholase activity

The orange-red colored complexes of the type [Fe(L_SB)Cl₃], 1, have been synthesized in excellent yields by reacting FeCl₃·6H₂O with L_SB in methanol. Here, L_SB is (2-(ethylthio)-N-(pyridin-2-ylmethyl)ethanamine), (L_SB¹) and (2-(benzylthio)-N-(pyridin-2-ylmethyl)ethanamine) (L_SB²). Similarly, FeCl₃·6H₂O reacted with 2-(((2-(ethylthio) ethyl) (pyridin-2-ylmethyl)amino)methyl)phenol (HL¹), 2-(((2-(ethylthio)ethyl)(pyridin-2 ylmethyl)amino)methyl)-4-nitrophenol (HL²), 4-chloro-2-(((2-(ethylthio)ethyl)(pyridin-2-ylmethyl)amino)methyl)phenol (HL³), 2-(((2-(benzylthio)ethyl)(pyridin-2-ylmethyl) amino)methyl)phenol (HL⁴), 2-(((2-(benzylthio)ethyl)(pyridin-2-ylmethyl)amino)methyl) -4-nitrophenol (HL⁵), and 4-chloro-2-(((2-(benzylthio)ethyl)(pyridin-2-ylmethyl)amino) methyl)phenol (HL⁶) to give dichloro complexes of the type [Fe(L)Cl₂], 2. The solid and solution structure of the complexes, as well as their properties, were probed using X-ray diffraction, spectroscopic and electrochemical methods. The Mössbauer spectral study at 80 K for complexes reveals the existence of (III) oxidation state and high-spin state of the metal center in the complex. Dioxygenase activity of the complexes has been studied and both 1 and 2 have been found to display the intradiol-cleaving pathway. However, no extradiol cleavage products have been isolated.     

Synthesis and crystal structure of a salicylatooxovanadium(V) complex of an aminebis(phenolate) ligand: Kinetic studies on its formation from corresponding alkoxo complexes

Synthesis and single crystal X-ray structures of H₂L¹ and VO(L¹)(HL) [H₂L¹ = N,N-bis(2-hydroxy-3,5-ditertiarybutyl)-N′,N′-dimethylethylendiamine) or simply aminebis(phenol) and H₂L = salicylic acid) are reported here. The complex [VO(L¹)(HL)] is in distorted octahedral geometry under O₄N₂ donor environment where the basal core is defined by O(1), O(3), O(2) and N(5) atoms and two axial coordinates are occupied by O(4), an alkoxo-group and N(1), an imino-nitrogen atom. The electron spray mass spectrometric study on [VO(L¹)(HL)] in MeCN clearly points out the existence of single species in solution. Again, the ⁵¹V NMR of the bulk polycrystalline sample reveals that the complex [VO(L¹)(HL)] mainly exists in three out of four possible isomers. The formation of [VO(L¹)(HL)] from both [VO(L¹)(OMe)] and [VO(L¹)(OEt)] was followed kinetically by reacting with salicylic acid in MeCN. The presence of isosbestic point indicates a clean conversion of the reactants to product.     

Functional model for intradiol-cleaving catechol 1,2-dioxygenase: Synthesis, structure, spectra, and catalytic activity of iron(III) complexes with substituted salicylaldimine ligands

A series of mononuclear iron(III) complexes with containing phenolate donor of substituted-salicylaldimine based ligands [Fe(L¹)(TCC)] · CH₃OH (1), [Fe(L²)(TCC)] · CH₃OH (2), [Fe(L³)(TCC)] (3), and [Fe(L⁴)(TCC)] (4) have been prepared and studied as functional models for catechol dioxygenases (H₂TCC = tetrachlorocatechol, or HL¹ = N′-(salicylaldimine)-N,N-diethyldiethylenetriamine, HL² = N′-(5-Br-salicylaldimine)-N,N-diethyldiethylenetriamine, HL³ = N′-(4,6-dimethoxy-salycyl-aldimine)-N,N-diethyl-diethylenetriamine, HL⁴ = N′-(4-methoxy-salicylaldimine)-N,N-diethyl-diethylenetriamine). They are structural models for inhibitors of enzyme-substrate adducts from the reactions of catechol 1,2-dioxygenases. Complexes 1-4 were characterized by spectroscopic methods and X-ray crystal structural analysis. The coordination sphere of Fe(III) atom of 1-4 is distorted octahedral with N₃O₃ donor set from the ligand and the substrate TCC occupying cis position, and Fe(III) is in high-spin (S = 5/2) electronic ground state. The in situ prepared iron(III) complexes without TCC, [Fe(L¹)Cl₂], [Fe(L²)Cl₂], [Fe(L³)Cl₂], and [Fe(L⁴)Cl₂] are reactive towards intradiol cleavage of the 3,5-di-tert-butylcatechol (H₂DBC) in the presence of O₂ or air. The reaction rate of catechol 1,2-dioxygenase depends on the redox potential and acidity of iron(III) ions in complexes as well as the substituent effect of the ligands. We have identified the reaction products and proposed the mechanism of the reactions of these iron(III) complexes with H₂DBC with O₂.     

Functional model for catecholase-like activity: Synthesis, structure, spectra, and catalytic activity of iron(III) complexes with substituted-salicylaldimine ligands

Four new mononuclear iron(III) complexes with the substituted-salicylaldimine ligands, [Fe(L¹)(TCC)] (1), [Fe(L²)(TBC)] (2), [Fe(L³)(TBC)] (3) and [Fe(L⁴)(TCC)](CH₃CN) (4) (HL¹ = N′-(5-OH-salicylaldimine)-diethylenetriamine, HL² = (N′-(5-Cl-salicylaldimine)-diethylenetriamine, HL³ N′-(5-Br-salicyl-aldimine)-dipropylenetriamine, HL⁴ = (N′-3,5-Br-salicylaldimine)-dipropylenetriamine, H₂TCC = tetrachlorocatechol, and H₂TBC = tetrabromocatechol), were prepared and characterized by XRD, EPR, and Mössbauer spectroscopy. The coordination sphere of the Fe(III) in complexes 1-4 is a distorted octahedral with N₃O₃ donors set which constructed by the Schiff-base ligands and the catecholate substrates of TBC or TCC. The in situ prepared Fe(III) complexes [Fe(L¹)Cl₂], [Fe(L²)Cl₂], [Fe(L³)(Cl₂)], and [Fe(L⁴)Cl₂] in absence of TBC or TCC show a high catecholase-like activity for the oxidation of 3,5-DTBC to the corresponding quinone 3,5-DTBQ.     

Effect of metal coordination and intra-molecular H-bond on the acidity of phenolic proton in a set of structurally characterized octahedral Ni(II) complexes of l-histidine derivative

Four different mononuclear octahedral Ni(II) complexes with protonated and deprotonated form of the same ligand have been synthesized by controlling reaction conditions and structurally characterized. The complexes are [Ni(HL^l-his)(benzoate)(MeOH)] (1), [Ni(HL^l-his)(SCN)(MeOH)] (2), [Ni(HL^l-his)₂] (3) and [Ni(L^l-his)(imidazole)₂] (4) where H₂L^l-his is (S)-2-(2-hydroxybenzylamino)-3-(1H-imidazol-4-yl)-propionic acid. The ligand behaves as a monobasic tetradentate ligand in 1 and 2, monobasic tridentate ligand in 3 and dibasic tetradentate ligand in 4. Ni(II) coordinated phenolic proton of the ligand in the complexes 1-2 shows strong intra-molecular H-bonding with benzoate in 1 and lattice water in 2, whereas 3 shows intermolecular H-bonding between uncoordinated phenols with neighbouring carboxylate. The pH titration of the complexes revealed that metal coordination and H-bond in complexes 1 and 2 considerably lowers the acidity of ligand phenol (pK_a 6.8 and 7.0 respectively) compared to phenol (pK_a 10). The complex 4 does not show any proton loss due to the absence of phenolic proton. All the complexes show extensive H-bonded network in the crystals including narrow (7.8 × 5.2 Å) water filled one dimensional channel in 2.     

Synthesis, structures and magnetic properties of 1D to 3D coordinated polymers based on series of flexible sulfide ligands

Five complexes [Mn₂O(L₁)₄]_n (1), [Co(L₂)(H₂O)₂]_n (2), [Co(L₃)₂(H₂O)₂]_n (3) and [Co(L₄)₂(4,4′-bpy)(H₂O)]_n (4) were obtained by using flexible organic ligands HL₁, HL₂, HL₃, and HL₄ in hydrothermal systems with cobalt, copper and manganese salts respectively (HL₁ = 2-(4-pyridylmethylthio)benzoic acid, HL₂ = 4-(4-pyridylmethylthio)benzoic acid, HL₃ = 2-(3-pyridylmethylthio)benzoic acid, HL₄ = 4-(2-pyridylmethylthio)benzoic acid). The five complexes have been characterized by X-ray single crystal diffraction, FT-IR spectrum and elemental analysis. Complex 1 is assembled to a 3D porous framework with Mn₂O units as nodes. Complex 2 shows 2D layer networks comprised of six-coordinated Co²⁺ centers and L₂⁻ anionic ions. Complexes 3 and 4 have different 1D double or single chain structures. Various non-covalent bonds such as hydrogen bonds, π?π interactions, H-bond grids and S?S weak interactions lead to interesting supramolecular frameworks. DC (direct current) temperature dependent magnetic susceptibilities suggest weak antiferromagnetic behaviors exist in 1, and single ion paramagnetic along with spin-orbit coupling behavior dominate in 3 and 4.     

Structure, magnetic properties and nuclease activity of pyridine-2-carbaldehyde thiosemicarbazonecopper(II) complexes

New complexes of formulae [Cu(HL²)(H₂O)(NO₃)](NO₃) (1), [{Cu(L¹)(tfa)}₂] (2), [{Cu(L¹)}₂(pz)](ClO₄)₂ (3) and {[{Cu(L¹)}₂(dca)](ClO₄)}_n (4), where HL¹ = pyridine-2-carbaldehyde thiosemicarbazone, HL² = pyridine-2-carbaldehyde 4N-methylthiosemicarbazone, Htfa = trifluoroacetic acid (CF₃COOH), pz = pyrazine (C₄H₄N₂) and dca = dicyanamide [N(CN)₂]⁻, have been synthesized and characterized. The crystal structures of these compounds are built up of monomers (1), dinuclear entities with the metal centers bridged through the non-thiosemicarbazone coligand (2 and 3) and 1D chains of dimers (4). In all the cases, square-pyramidal copper(II) ions are present, except for the square-planar ones in 3. Magnetic measurements show antiferromagnetic couplings in 2, 3 and 4. The susceptibility data were fitted by the Bleaney-Bowers’ equation for copper(II) dimers derived from H = -2JS₁S₂ being the obtained J/k values −4.8, −4.3 and −5.1 K for compounds 2-4, respectively. The magnetic susceptibility of the already known [{Cu(HL¹)(tfa)}₂](tfa)₂ compound has been also measured for the first time. The J/k value is -0.3 K, lower than that in 2. The nuclease activity of 3 and 4 has been analyzed.     

First microwave-assisted synthesis of an electron-rich phosphane and its coordination chemistry with platinum(II) and palladium(II)

The P-O ligand 3-(di(2-methoxyphenyl)phosphanyl)propionic acid (HL) was synthesized by a microwave-assisted reaction of a secondary phosphane. The coordination of HL to Pt^II yielded the neutral mononuclear complex trans-[PtCl(κ²-P,O-L)(κ-P-HL)] (1), while the reaction of PdClMe(η⁴-COD) (COD = 1,4-cyclooctadiene) with HL in the presence of NEt₃ gave the anionic Pd^II compound of the formula (HNEt₃)[PdClMe(κ²-P,O-L)] (2). Upon crystallization of the latter compound the neutral chloride-bridged dimetallic compound cis-[Pd(μ-Cl)Me(HL)]₂ (3) was obtained. HL, 1 and 3·CH₂Cl₂ have been characterized by single crystal X-ray structure analyses.     

Functional mimics of catechol oxidase by mononuclear copper complexes of sterically demanding [NNO] ligands

Several mononuclear copper complexes 1(a-b) and 2(a-b) supported over sterically demanding [NNO] ligands namely, N-(aryl)-2-[(pyridin-2-ylmethyl)amino]acetamide [aryl = 2,6-diethylphenyl (1) and mesityl (2)], exhibit catecholase-like activity in performing the aerial oxidation of 3,5-di-t-butylcatehol (3,5-DTBC) to 3,5-di-t-butyl-catequinone (3,5-DTBQ) under ambient conditions. The 1(a-b) and 2(a-b) complexes were directly synthesized from the reaction of the respective ligands 1-2 with CuX₂·nH₂O (X = Cl, NO₃, n = 2, 3) in 55-85% yield. Mechanistic insights on the catalytic cycle as obtained by density functional theory studies for a representative complex 1a suggest that an intramolecular hydrogen transfer, from a catechol-OH moiety to a copper bound superoxo moiety, form the rate-determining step of the oxidation process, displaying an activation barrier of 18.3 kcal/mol (ΔG^‡) [6.9 kcal/mol in Δ(PE + ZPE)^‡ scale].     

Synthesis and characterisation of palladium(II) and platinum(II) compounds containing pyrazole-derived ligands: crystal structure of [PdCl2(HL)] (HL = 3-phenyl-5-(2-pyridyl)pyrazole)

Reaction of the ligands 3-phenyl-5-(2-pyridyl)pyrazole (HL¹), 3,5-bis(2-pyridyl)pyrazole (HL²), 3-methyl-5-(2-pyridyl)pyrazole (HL³) and 3-methyl-5-phenylpyrazole (HL⁴) with [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) or [PdCl₂(cod)] gives complexes with stoichiometry [PdCl₂(HL)₂] (HL = HL¹, HL², HL³), [Pt(L)₂] (L = L¹, L², L³) and [MCl₂(HL⁴)₂] (M = Pd(II), Pt(II)). The new complexes were characterised by elemental analyses, conductivity measurements, infrared and ¹H NMR spectroscopies. The crystal and molecular structure of [PdCl₂(HL¹)] was resolved by X-ray diffraction, and consists of monomeric cis-[PdCl₂(HL¹)] molecules. The palladium centre has a typical square planar geometry, with a slight tetrahedral distortion. The tetra-coordinated metal atom is bonded to one pyridine nitrogen, one pyrazolic nitrogen and two chloro ligands in a cis disposition. The ligand HL¹ is not completely planar.     

The interplay of O-H?O hydrogen bonding in the generation of three new supramolecular complexes of Cu, Ni and Co: Syntheses, characterization and structural aspects

Three new coordination complexes, [Cu(L¹)(H₂O)] (1), [Ni(L²)₂]·CH₃CN (2) and [Co(HL³)(L³)] (3) [where H₂L¹, N,N′-bis(3-methoxysalicylidenimino)-1,3-diamino-propane; HL², 2-((E)-(1,3-dihydroxy-2-methylpropan-2-ylimino)methyl)phenol; H₂L³, 2-((E)-(2-hydroxyethylimino)methyl)-4-bromophenol] have been synthesized and systematically characterized by elemental analyses, FT-IR, electronic spectroscopy, cyclic voltammetry and thermogravimetric analyses. Single crystal X-ray diffraction studies confirm that the metal center in complex 1 has distorted square-pyramidal geometry while it is distorted octahedral in the other two complexes. In all the complexes O-H?O hydrogen bondings assemble the molecular units leading to ordered supramolecular architectures. While both complexes 1 and 2 form infinite one-dimensional arrays through the self organisation of hydrogen bonded ring motifs, complex 3 is a unique star-shaped cyclic hexamer generated through intermolecular hydrogen bonding.     

DNA binding and nuclease activity of copper(II) complexes of tridentate ligands

Two copper(II) complexes, 1 and 2 with L₁ and L₂ [L₁ = 2-hydroxybenzyl(2-(pyridin-2-yl)ethylamine); L₂ = 2-hydroxybenzyl(2-(pyridin-2-yl)methylamine)] ligands, respectively, have been synthesized and characterized. The interaction of both the complexes with DNA has been studied to explore their potential biological activity. The DNA binding properties of the complexes with calf thymus (CT) DNA were studied by spectroscopic titration. The complexes show binding affinity to CT DNA with binding constant (K_b) values in the order of 10⁵ M⁻¹. Thermal denaturation and circular dichroism studies suggest groove binding of the complexes to CT DNA. Complexes also exhibit strong DNA cleavage activity in presence of reducing agents like 3-mercaptopropionic acid and β-mercaptoethanol. Mechanistic studies reveal the involvement of reactive hydroxyl radicals for their DNA cleavage activity.     

Mononuclear iron(III) complexes supported by tripodal N3O ligands: Synthesis, structure and reactivity towards DNA cleavage

A new synthetic route to the known tripodal tetradentate N₃O ligand L¹ (HL¹ = [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine) is reported. The related compounds HLⁿ (n = 2, 3) were prepared by a similar procedure. Treatment of HLⁿ (n = 1-3) with FeCl₃·6H₂O in hot methanol led to the mononuclear iron(III) complexes [Fe(Lⁿ)Cl₂] (1: n = 1, 2: n = 2, 3: n = 3). The solid-state structures of complexes 1 and 2 were determined by X-ray crystallography. [Fe(L¹)Cl₂] (1) showed effective nuclease activity in the presence of hydrogen peroxide, converting supercoiled plasmid DNA to its linear form.     

New metal complexes with 5-(1H-imidazol-4-ylmethyl)aminoisophthalic acid: Syntheses, structures, electrochemistry and electrocatalysis

Three new coordination polymers {[Cu(HL)(H₂O)]·H₂O}_n (1), [Ag(H₂L)]_n (2), and {[Co(HL)(phen)(H₂O)]·8H₂O}_n (3) [H₃L = 5-(1H-imidazol-4-ylmethyl)aminoisophthalic acid, phen = 1,10-phenanthroline] have been synthesized under hydrothermal conditions. The results of X-ray diffraction analysis revealed that complex 1 displays (3, 3)-connected 2D network with (4, 8²) topology, while complexes 2 and 3 have infinite 1D chain structure, in which one of the two carboxylic groups of H₂L⁻/HL²⁻ is uncoordinated. The 2D layers of 1 or the 1D chains of 2 and 3 are further linked together by hydrogen bonds and π-π interactions to form 3D supramolecular frameworks. Moreover, the electrochemical properties of complexes 1 and 2 have been studied by modified glassy carbon electrodes of 1 (Cu-GCE) and 2 (Ag-GCE), and the results indicate that the Cu-GCE and Ag-GCE show one-electron redox peaks. In addition, both Cu-GCE and Ag-GCE have good electrocatalytic activities toward the reduction of H₂O₂ in phosphate buffer (pH 5.5) solution.     

Two new end-to-end single dicyanamide bridged Cu(II) complexes with Schiff base ligands: Structural, electrochemical and magnetic properties

The synthesis, crystal structures and magnetic properties of two different copper(II) complexes of formula [Cu(L¹)(dca)]_n · nClO₄ (1) and [Cu(L²)]₂(dca)(ClO₄) (2) [L¹ = N,N-dimethylethylene-N′-(pyridine-2-carbaldiiminato), HL² = N,N-dimethylethylene-N′-salicylaldiiminato, dca = dicyanamide anion] are described. Spectroscopic and electrochemical properties have also been discussed. A one-dimensional chain structure with single, symmetrical, μ_1,5-dca bridges is found in compound 1. The copper atom in 1 has a square pyramidal geometry. A tridentate Schiff base ligand, having NNN donor sites, and one nitrogen atom from dca occupy the basal plane. N(18) of a neighbouring unit occupies the apical site. The Schiff base used in compound 2 is a tridentate anion with NNO donor sites, which changes the structure in a dinuclear unit of copper atoms bridged by single end-to-end dicyanamide ion. The environment around copper in 2 is square planar. Magnetic susceptibility measurements for 1 and 2 reveal the occurrence of weak antiferromagnetic interaction through the dca ligand.     

Complexes of N-thiophosphorylthioureas RNHC(S)NHP(S)(OiPr)2 (HL) (R = pyridin-2-yl, pyridin-3-yl, 6-amino-pyridin-2-yl) with copper(I): Crystal structures of Cu(PPh3)nL (n = 1, 2)

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RNHC(S)NHP(S)(OiPr)₂ [R = pyridin-2-yl (HL^a), pyridin-3-yl (HL^b), 6-amino-pyridin-2-yl (HL^c)] with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to mononuclear [Cu(PPh₃)₂L^a,b-S,S′] (1, 2) and [Cu(PPh₃)L^c-S,S′] (3) complexes. Using copper(I) iodide instead of Cu(PPh₃)₃I, polynuclear complexes [Cu_n(L-S,S′)_n] (4-6) were obtained. The structures of these compounds were investigated by IR, ¹H, ³¹P{¹H} NMR spectroscopy, ES-MS and elemental analyses. The crystal structures of Cu(PPh₃)₂L^b (2) and Cu(PPh₃)L^c (3) were determined by single-crystal X-ray diffraction.     

Two different 1D-chains in the structures of the copper(I) coordination polymers based on bidentate Schiff-base building units and thiocyanate anions as bridging ligands

The reaction of the bidentate Schiff-base ligands (3,4,5-MeO-ba)₂en (L¹) and (4-Me-ba)₂en (L²) with Cu(SCN) in CH₃CN yielded two copper(I) coordination polymers [Cu(L¹)(SCN)]_n (1) and [Cu(L²)(SCN)]_n (2), which have been characterized by elemental analyses, IR- and ¹H NMR-spectroscopy, and X-ray crystallography. The non-centrosymmetric structures of both Cu(I) complexes consist of an one-dimensional polymeric chain in which copper(I) ions are bridged by two thiocyanate groups bonding in an end-to-end fashion. The Cu(I)?Cu(I) separation is 5.604 Å in 1 and 5.706 Å in 2.     

Rhenium(III) and technetium(III) complexes with 2-mercapto-1,3-azole ligands and X-ray crystal structures

Reactions of labile [MCl₃(PPh₃)₂(NCMe)] (M = Tc, Re) precursors with 1H-benzoimidazole-2-thiol (H₂L¹), 5-methyl-1H-benzoimidazole-2-thiol (H₂L²) and 1H-imidazole-2-thiol (H₂L³), in the presence of PPh₃ and [AsPh₄]Cl gave a new series of trigonal bipyramidal M(III) complexes [AsPh₄]{[M(PPh₃)Cl(H₂L^1-3)₃]Cl₃} (M = Re, 1-3; M = Tc, 4-6). The molecular structures of 1 and 3 were determined by X-ray diffraction. When the reactions were carried out with benzothiazole-2-thiol (HL⁴) and benzoxazole-2-thiol (HL⁵), neutral paramagnetic monosubstituted M(III) complexes [M(PPh₃)₂Cl₂(L^4,5)] (M = Re, 8, 9; M = Tc, 10, 11) were obtained. In these compounds, the central metal ions adopt an octahedral coordination geometry as authenticated by single crystal X-ray diffraction analysis of 8 and 11. Rhenium and technetium complexes 1, 4 and rhenium chelate compounds 8, 9 have been also synthesized by reduction of [MO₄]⁻ with PPh₃ and HCl in the presence of the appropriate ligand. All the complexes were characterized by elemental analyses, FTIR and NMR spectroscopy.     

Two Hg(II) complexes with a capped trigonal prismatic geometry derived from multidentate macrocyclic ligands containing N and S donors, with coordinated anions

Two Hg(II) complexes [HgL′(ClO₄)₂] (1) and [HgL(ClO₄)]ClO₄ (2) derived from the macrocyclic ligands, 4-(pyridin-2-ylmethyl)-1,7-dithia-4,10-diazacyclododecane (L′) and 7-(pyridin-2-ylmethyl)-1,4,10-trithia-7,13-diazacyclopentadecane (L), have been crystallographically characterised. Ligand L and its Hg(II) complex were isolated unexpectedly, and a possible formation pathway of the ligand is proposed. By including weakly bound O atoms from the perchlorate ions, the Hg atoms in both complexes are seven-coordinate and possess capped trigonal prismatic geometries. These uncommon structures for Hg(II) complexes were achieved mainly by the relatively large size of the metal ion and the steric effect from the macrocycles. In both complexes, strong hydrogen bonding between the amine hydrogen atom and a perchlorate ion was observed. For complex 1, the interaction is N(3)-H(15)···O(8) at 2.08(12) Å where O(8) is of the same anion as one of the coordinated O atoms; in complex 2, a similar hydrogen bond, N(7)-H(7)···O(32), with a distance of 2.25 Å, is formed to the coordinated anion, but the second anion remains discrete.     

Synthesis, structure, and catalytic activity of chiral Cu(II) and Ag(I) complexes with (S,S)-1,2-diaminocyclohexane-based N4-donor ligands

Condensation of (S,S)-1,2-cyclohexanediamine with 2 equiv. of 2-pyridine carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives N,N′-bis(pyridin-2-ylmethylene)-(S,S)-1,2-cyclohexanediamine (S,S-1) in 95% yield. Reduction of 1 with an excess of NaBH₄ in MeOH at 50 °C gives N,N′-bis(pyridin-2-ylmethyl)-(S,S)-1,2-cyclohexanediamine (S,S-2) in 90% yield. Reaction of 1 or 2 with 1 equiv. of CuCl₂ · 2H₂O in methanol gives complexes [N-(pyridin-2-ylmethylene)-(S,S)-1,2-cyclohexanediamine]CuCl₂ (3) and [Cu(S,S-2)(H₂O)]Cl₂ · H₂O (4), respectively, in good yields. Complex 4 can further react with 1 equiv. of CuCl₂ · 2H₂O in methanol to give [Cu(S,S-2)][CuCl₄] (5) in 75% yield. The rigidity of the ligand coupled with the steric effect of the free anion plays an important role in the formation of the helicates. Treatment of ligand S,S-1 with AgNO₃ induces a polymer helicate {[Ag(S,S-1)][NO₃]}_n (6), while reaction of ligand 2 with AgPF₆ or AgNO₃ in methanol affords a mononuclear single helicate [Ag(S,S-2)][PF₆] (7) or a dinuclear double helicate [Ag₂(S,S-2)₂][NO₃]₂ · 2CH₃OH (8) in good yields, respectively. All compounds have been characterized by various spectroscopic data and elemental analyses. Compounds 1, 3-5, 7 and 8 have been further subjected to single-crystal X-ray diffraction analyses. The Cu(II) complexes do not show catalytic activity for allylation reaction, in contrast to Ag(I) complexes, but they do show catalytic activity for Henry reaction (nitroaldol reaction) that Ag(I) complexes do not.