Productivity of Chlorella sorokiniana in a short light‐path (SLP) panel photobioreactor under high irradiance

Maximal productivity of a 14 mm light‐path panel photobioreactor under high irradiance was determined. Under continuous illumination of 2,100 µmol photons m^?2 s^?1 with red light emitting diodes (LEDs) the effect of dilution rate on photobioreactor productivity was studied. The light intensity used in this work is similar to the maximal irradiance on a horizontal surface at latitudes lower than 37°. Chlorella sorokiniana, a fast‐growing green microalga, was used as a reference strain in this study. The dilution rate was varied from 0.06 to 0.26 h^?1. The maximal productivity was reached at a dilution rate of 0.24 h^?1, with a value of 7.7 g dw m^?2 h^?1 (m² of illuminated photobioreactor surface) and a volumetric productivity of 0.5 g dw L^?1 h^?1. At this dilution rate the biomass concentration inside the reactor was 2.1 g L^?1 and the photosynthetic efficiency was 1.0 g dw mol photons. This biomass yield on light energy is high but still lower than the theoretical maximal yield of 1.8 g mol photons^?1 which must be related to photosaturation and thermal dissipation of absorbed light energy. Biotechnol. Bioeng. 2009; 104: 352–359 © 2009 Wiley Periodicals, Inc.     

Key parameters for outdoor biomass production of Scenedesmus obliquus in solar tracked photobioreactors

The biomass productivity of Scenedesmus obliquus was investigated outdoors during all seasons in solar tracked flat panel photobioreactors (PBR) to evaluate key parameters for process optimization. CO₂ was supplied by flue gas from an attached combined block heat and power plant. Waste heat from the power plant was used to heat the culture during winter. The parameters pH, CO₂, and inorganic salt concentrations were automatically adjusted to nonlimiting levels. The optimum biomass concentration increased directly with the photosynthetic active radiation (PAR) from 3 to 5 g dry weight (DW)?L^?1 for a low PAR of 10 mol photons m^?2 day^?1 and high PAR of 40–60 mol photons m^?2 day^?1, respectively. The annual average biomass yield (photosynthetic efficiency) was 0.4?±?0.5 g DW mol^?1 photons. However, biomass yields of 1.5 g DW mol^?1 photons close to the theoretical maximum were obtained at low PAR. The productivity (including the night biomass losses) ranged during all seasons from ?5 up to 30 g DW m^?2 day^?1 with a mean productivity of 9?±?7 g DW m^?2 day^?1. Low night temperatures of the culture medium and elevated day temperatures to the species-specific optimum increased the productivity. Thus, continuous regulation of the biomass concentration and the culture temperature with regard to the fluctuating weather conditions is essential for process optimization of outdoor microalgal production systems in temperate climates.     

Assessment of key biological and engineering design parameters for production of Chlorella zofingiensis (Chlorophyceae) in outdoor photobioreactors

For the design of a large field of vertical flat plate photobioreactors (PBRs), the effect of four design parameters—initial biomass concentration, optical path length, spacing, and orientation of PBRs—on the biochemical composition and productivity of Chlorella zofingiensis was investigated. A two-stage batch process was assumed in which inoculum is generated under nitrogen-sufficient conditions, followed by accumulation of lipids and carbohydrates in nitrogen-deplete conditions. For nitrogen-deplete conditions, productivity was the most sensitive to initial biomass concentration, as it affects the light availability to individual cells in the culture. An initial areal cell concentration of 50 g m^?2 inoculated into 3.8-cm optical path PBR resulted in the maximum production of lipids (2.42?±?0.02 g m^?2 day^?1) and carbohydrates (3.23?±?0.21 g m^?2 day^?1). Productivity was less sensitive to optical path length. Optical path lengths of 4.8 and 8.4 cm resulted in similar areal productivities (biomass, carbohydrate, and lipid) that were 20 % higher than a 2.4-cm optical path length. Under nitrogen-sufficient conditions, biomass productivity was 48 % higher in PBRs facing north–south during the winter compared to east–west, but orientation had little influence on biomass productivity during the spring and summer despite large differences in insolation. An optimal spacing could not be determined based on growth alone because a tradeoff was observed in which volumetric and PBR productivity increased as space between PBRs increased, but land productivity decreased.     

Screening and characterization of Isochrysis strains and optimization of culture conditions for docosahexaenoic acid production

Isochrysis is a genus of marine unicellular microalgae that produces docosahexaenoic acid (DHA, C22:6), a very long chain polyunsaturated fatty acid (PUFA) of significant health and nutritional value. Mass cultivation of Isochrysis for DHA production for human consumption has not been established due to disappointing low DHA productivity obtained from commonly used Isochrysis strains. In this study, 19 natural Isochrysis strains were screened for DHA yields and the results showed that the cellular DHA content ranged from 6.8 to 17.0 % of total fatty acids with the highest DHA content occurring in the exponential growth phase. Isochrysis galbana #153180 exhibited the greatest DHA production potential and was selected for further investigation. The effects of different light intensities, forms, and concentrations of nitrogen, phosphorus, and salinity on growth and DHA production of I. galbana #153180 were studied in a bubble column photobioreactor (PBR). Under favorable culture conditions, I. galbana #153180 contained DHA up to 17.5 % of total fatty acids or 1.7 % of cell dry weight. I. galbana #153180 was further tested in outdoor flat-plate PBRs varying in light path length, starting cell density (SCD), and culture mode (batch versus semicontinuous). When optimized, record high biomass and DHA productivity of I. galbana #153180 of 0.72 g L^?1?day^?1 and 13.6 mg?L^?1?day^?1, or 26.4 g?m^?2?day^?1 and 547.7 mg?m^?2?day^?1, respectively, were obtained, suggesting that I. galbana #153180 may be a desirable strain for commercial production of DHA.     

Upper limits of photosynthetic productivity and problems of scaling

Some 1,370 W m^?2 of light energy reaches the outer atmosphere of earth and on average only 240 W m^?2 reaches the earth’s surface. Only a fraction of this is used to fix CO₂ through photosynthesis, and efficiencies ranging from 0.1?8% for total irradiance have been reported. The theoretical maximum quantum efficiency of carbon fixation is 0.125 mol C (mol quanta)^?1 which relates to a maximum productivity of about 12 g C m^?2 day^?1 or 29.8 g(dw) m^?2 day^?1. This could increase to a maximum of 200 g(dw) m^?2 day^?1 in intermittent light of high frequencies, which is on average eight times higher than the average measured under field conditions where rates approaching 25 g(dw) m^?2 day^?1 are considered high. Several possibilities exist for achieving higher yields and photosynthetic efficiencies, such as limiting the antennae sizes and pulsing light at frequencies equivalent to electron turnover in the electron transport chains of photosynthesis. Scaling from laboratory experimental conditions to large commercial photobioreactors is a major stumbling block and may be the single most important factor responsible for the overall low reported areal production rates.     

Growth model for raceway pond cultivation of Desmodesmus sp. MCC34 isolated from a local water body

Biofuel production by microalgae has the advantage of higher biomass productivity over land crops. The selection of potential microalgae depends on the growth in outdoor mass cultivation during different seasons, which can be predicted by a mathematical model. Here, freshwater green algae were isolated from a local water body in Pilani, Rajasthan, India (geographical coordinates: 28°22′N 75°36′E) and characterized by microscopy and ribosomal RNA analysis. The strain was submitted to the Indian Agricultural Research Institute's microbial culture collection (IARI, India) and identified as Desmodesmus sp. MCC34. This strain, along with a fresh water green algae (Chlorella minutissima), two marine green algae species (Dunaliella salina and Dunaliella tertiolecta) and two nitrogen fixing cyanobacteria (Nostoc muscorum and Anabaena doliolum), were screened for lipid productivity and growth kinetics under culture room and raceway pond conditions. Desmodesmus sp. MCC34 showed the highest specific growth rate (0.26 day^?1), biomass production (1.9 g L^?1) and lipid productivity (103 mg L^?1 day^?1). The optimal temperature and saturating light intensity for maximal growth of Desmodesmus sp. MCC34 were 35 °C and 75 μmol m^?2 s^?1 with molar extinction coefficient of 0.22 m² g^?1, respectively. Desmodesmus sp. MCC34 was then subjected to outdoor cultivation in a 20‐m long raceway pond for 18 days during March and November 2013. The areal biomass productivity and volumetric biomass productivity were 13946.23 kg ha^?1 year^?1 and 56.94 mg L^? 1day^?1 during the month of March, decreasing to 6262.28 kg ha^?1 year^?1 and 25.57 mg L^? 1day^?1 during the month of November. A mathematical model was constructed to explain the relationship between biomass production and growth parameters such as temperature, light intensity and nutrient concentration. The productivity values predicted with the proposed model correspond well with the experimental data, suggesting the validity of the model.     

Productivity analysis of outdoor chemostat culture in tubular air-lift photobioreactors

Net productivity and biomass night losses in outdoor chemostat cultures ofPhaeodactylum tricornutum were analyzed in two tubular airlift photobioreactors at different dilution rates, photobioreactor surface/volume ratios and incident solar irradiance. In addition, an approximate model for the estimation of light profile and average irradiance inside outdoor tubular photobioreactors was proposed. In both photobioreactors, biomass productivity increased with dilution rate and daily incident solar radiation except at the highest incident solar irradiances and dilution rates, when photoinhibition effect was observed in the middle of the day. Variation of estimated average irradiance vs mean incident irradiance showed two effects: first, the outdoor cultures are adapted to average irradiance, and second, simultaneous photolimitation and photoinhibition took place at all assayed culture conditions, the extent of this phenomena being a function of the (incident)¹ irradiance and light regime inside the culture. Productivity ranged between 0.50 and 2.04 g L^–1 d^–1 in the tubular photobioreactor with the lower surface/volume ratio (S/V = 77.5 m^–1) and between 1.08 and 2.76 g L^–1 d^–1 in the other (S/V = 122.0 m^–1). The optimum dilution rate was 0.040 h^–1 in both reactors. Night-time biomass losses were a function of the average irradiance inside the culture, being lower in TPB0.03 than TPB0.06, due to a better light regime in the first. In both photobioreactors, biomass night losses strongly decreased when the photoinhibition effect was pronounced. However, net biomass productivity also decreased due to lower biomass generation during the day. Thus, optimum culture conditions were obtained when photolimitation and photoinhibition were balanced.     

Impact of light quality on a native Louisiana Chlorella vulgaris/Leptolyngbya sp. co‐culture

Light effect on cultures of microalgae has been studied mainly on single species cultures. Cyanobacteria have photosynthetic pigments that can capture photons of wavelengths not available to chlorophylls. A native Louisiana microalgae (Chlorella vulgaris ) and cyanobacteria (Leptolyngbya sp.) co‐culture was used to study the effects of light quality (blue–467 nm, green–522 nm, red–640 nm and white–narrow peak at 450 nm and a broad range with a peak at 550 nm) at two irradiance levels (80 and 400 μmol m^?2 s^?1) on the growth, species composition, biomass productivity, lipid content and chlorophyll‐a production. The co‐culture shifted from a microalgae dominant culture to a cyanobacteria culture at 80 μmol m^?2 s^?1. The highest growth for the cyanobacteria was observed at 80 μmol μmol m^?2 s^?1 and for the microalgae at 400 μmol m^?2 s^?1. Red light at 400 μmol m^?2 s^?1 had the highest growth rate (0.41 d^?1), biomass (913 mg L^?1) and biomass productivity (95 mg L^?1 d^?1). Lipid content was similar between all light colors. Green light had the highest chlorophyll‐a content (1649 μg/L). These results can be used to control the species composition of mixed cultures while maintaining their productivity.     

Biomass productivity of two <Emphasis Type="Italic">Scenedesmus</Emphasis> strains cultivated semi-continuously in outdoor raceway ponds and flat-panel photobioreactors

Semi-continuous algal cultivation was completed in outdoor flat-panel photobioreactors (panels) and open raceway ponds (raceways) from February 17 to May 7, 2015 for side-by-side comparison of areal productivities at the Arizona Center for Algae Technology and Innovation in Mesa, AZ, USA. Experiments used two strains of Scenedesmus acutus (strains LB 0414 and LB 0424) to assess productivity, areal density, nutrient removal, and harvest volume across cultivation systems and algal strains. Panels showed an average biomass productivity of 19.0?±?0.6 g m^?2 day^?1 compared to 6.62?±?2.3 g m^?2 day^?1 for raceways. Photosynthetic efficiency ranged between 1.32 and 2.24 % for panels and between 0.30 and 0.68 % for raceways. Panels showed an average nitrogen consumption rate of 38.4?±?8.6 mg N L^?1 day^?1. Cultivation in raceways showed a consumption rate of 3.8?±?2.5 and 7.1?±?4.2 mg N L^?1 day^?1 for February/March and April/May, respectively, due to increase in biomass productivity. Excess nutrients were required to prevent a decrease in productivity. Daily biomass harvest volumes between 18 and 36 % from panels did not affect culture productivity, but density decreased with increased harvest volume. High cultivation temperatures above 30 °C caused strain LB 0414 to lyse and crash. Strain LB 0424 did not show any difference in biomass productivity when peak temperatures reached 34, 38, or 42 °C, but showed decreased productivity when the peak temperature during cultivation was 30 °C. Using algal strains with different temperature tolerances can generate increased annual biomass productivity.     

Synechococcus sp. (PTCC 6021) cultivation under different light irradiances—Modeling of growth rate-light response

Synechococcus sp. (PTCC 6021), a cyanobacterium species, was cultivated in an internally illuminated photobioreactor. The reactor was designed to achieve a monoseptic cultivation of the species. The goal was to study the growth–irradiance behavior of Synechococcus sp. (PTCC 6021). To accomplish this, different initial light irradiances were implemented inside the photobioreactor and the growth of the cells was monitored. It was observed that cell growth increased with higher light intensity until the photoinhibition occurrence at light irradiance higher than 250?μE?m^?2?s^?1. The maximum OD₆₀₀, maximum growth rate, and biomass productivity increased, and hence the extinction coefficient decreased, with the increase in light irradiance before photoinhibition. The maximum optical density (OD₆₀₀) of 5.91 was obtained with irradiance below 250?μE?m^?2?s^?1 during a growth period of 80 days. The modified Monod function could model the growth–irradiance of cells with satisfactory agreement with the experimental data. The comparison of growth–irradiance of the studied species with other photosynthetic organisms showed the same trend as for cyanobacteria with photoinhibition.     

Performance of bioelectrochemical systems inoculated with Desmodesmus sp. A8 under different light sources

Light source can affect the stomata opening, photosynthesis process, and pigment content in microalgae cells. In this study, growth rate, chlorophyll a (chl a) content, and electrogenic capability of Desmodesmus sp. A8 were investigated under incandescent and fluorescent lamps. Growth rate, productivity, and chl a content of strain A8 exposed to incandescent light were recorded as 0.092 ± 0.010 day^?1, 0.019 ± 0.008 g L^?1 day^?1, and 15.10 ± 1.40 mg L^?1, which decreased to 0.086 ± 0.006 day^?1, 0.012 ± 0.004 g L^?1 day^?1, and 10.06 ± 1.59 mg L^?1, respectively, under fluorescent light. The stable current density of bioelectrochemical systems inculcated with strain A8 under incandescent and fluorescent lamps were 249.76 and 158.41 mA m^?2 at ?0.4 V vs. Ag/AgCl, coupling with dissolved oxygen within biofilm decreasing from 15.91 to 10.80 mg L^?1. This work demonstrated that illuminating microalgae under an incandescent lamp can improve biomass production and electrogenic capabilities.     

Optimization of growth and production of toxins by three dinoflagellates in photobioreactor cultures

A bioreactor system for biotoxin production was appraised against traditional methods of growing dinoflagellate cultures. In an optimised bioreactor culture (5.4?L) operated in batch mode, growth of Karenia selliformis was more efficient than in 15-L bulk carboy culture in terms of growth rate (μ?=?0.07?day^?1 versus 0.05?day^?1) and growth maximum (G _max, 169.10⁶ versus 41.10⁶ cells L^?1). Maximal gymnodimine concentration (1200?μg L^?1) in bioreactor culture was 8-fold higher than in bulk carboy culture, and the yield per cell (pg cell^?1) was 2-fold higher. Similarly the bioreactor batch culture of Alexandrium ostenfeldii performed more efficiently than carboy cultures in terms of growth rate (1.6-fold higher), growth maximum (15-fold higher) and desmethyl C spirolide (SPX-desMe-C) yield (5-fold higher [μg L^?1], though the yield [pg cell^?1basis] was lower). When bioreactor cultures of K. selliformis were operated in continuous mode, the yield of gymnodimine was substantially higher than a carboy or the bioreactor run in batch mode to growth max (793?μg day^?1 over 58?days in continuous culture was achieved versus an average of 60?μg day^?1 [carboy over 40?days] or 249?μg day^?1 [batch mode] over 26?days). Likewise in continuous bioreactor cultures of A. ostenfeldii run over 25?days, the yield of SPX-desMe-C (29?μg day^?1) was substantially higher than in same cultures run in batch mode or carboys (10.2 day^?1 and 7.7?μg day^?1 respectively). Similarly 5.4?L bioreactor batch cultures of K. brevisulcata reached 3.8-fold higher cell densities than carboy cultures, and when operated in continuous mode, the brevisulcatic acids were more efficiently produced than in batch culture (12?μg day^?1 versus 7?μg day^?1). When the bioreactor system was upscaled to 52?L, the maximum cell densities and toxin yields of K. brevisulcata cultures were somewhat less than those achieved in the smaller reactor, which was attributed to reduced light penetration.     

Comparison of growth of Tetraselmis in a tubular photobioreactor (Biocoil) and a raceway pond

Microalgae cultivation systems can be divided broadly into open ponds and closed photobioreactors. This study investigated the growth and biomass productivity of the halophilic green alga Tetraselmis sp. MUR-233, grown outdoors in paddle wheel-driven open raceway ponds and in a tubular closed photobioreactor (Biocoil) at a salinity of 7 % NaCl (w/v) between mid-March and June 2010 (austral autumn/winter). Volumetric productivity in the Biocoil averaged 67 mg ash-free dry weight (AFDW) L^?1 day^?1 when the culture was grown without CO₂ addition. This productivity was 86 % greater, although less stable, than that achieved in the open raceway pond (36 mg L^?1 day^?1) grown at the same time in the autumn period. The Tetraselmis culture in the open raceway pond could be maintained in semi-continuous culture for the whole experimental period of 3 months without an additional CO₂ supply, whereas in the Biocoil, under the same conditions, reliable semi-continuous culture was only achievable for a period of 38 days. However, stable semi-continuous culture was achieved in the Biocoil by the addition of CO₂ at a controlled pH of ~7.5. With CO₂ addition, the volumetric biomass productivity in the Biocoil was 85 mg AFDW L^?1 day^?1 which was 5.5 times higher than the productivity achieved in the open raceway pond (15 mg AFDW L^?1 day^?1) with CO₂ addition and 8 times higher compared to the productivity in the open raceway pond without CO₂ addition (11 mg AFDW L^?1 day^?1), when cultures were grown in winter. The illuminated area productivities highlight an alternative story and showed that the open raceway pond had a three times higher productivity (3,000 mg AFDW m^?2 day^?1) compared to the Biocoil (850 mg AFDW m^?2 day^?1). Although significant differences were found between treatments and cultivation systems, the overall average lipid content for Tetraselmis sp. MUR-233 was 50 % in exponential phase during semi-continuous cultivation.     

Utilization of cane molasses towards cost-saving astaxanthin production by a Chlorella zofingiensis mutant

The aim of the present study was to survey the growth and astaxanthin production of E17, an astaxanthin-rich mutant of Chlorella zofingiensis, through feeding the low-cost carbon source cane molasses. In heterotrophic batch cultivation, E17 fed with pretreated molasses achieved biomass (1.79 g L^?1 day^?1) and astaxanthin (1.99 mg L^?1 day^?1) productivities comparable to those with glucose, which were about 2- and 2.8-fold of those fed with untreated molasses, respectively. Molasses-induced astaxanthin accumulation may be attributed to the elicited expression of carotenogenic genes, in particular the genes specifically responsible for the ketolation and hydroxylation of β-carotene to form astaxanthin. A two-stage fed-batch strategy was employed to grow E17 and induce astaxathin accumulation, resulting in 45.6 g L^?1 biomass and 56.1 mg L^?1 astaxanthin, the highest volumetric astaxanthin yield ever reported for this alga. In addition, the astaxanthin production by E17 was tested with a semi-continuous culture method, where the directly diluted raw molasses (giving 5 g L^?1 sugar) was used as the carbon source. Little growth inhibition of E17 was observed in the semi-continuous culture with a biomass productivity of 1.33 g L^?1 day^?1 and an astaxanthin productivity of 0.83 mg L^?1 day^?1. The mixotrophic semi-continuous cultures enhanced the biomass and astaxanthin productivities by 29.3 % and 42.2 %, respectively. This study highlights the potential of using the industrially cheap cane molasses towards large-scale cost-saving production of the high-value ketocarotenoid astaxanthin.     

Macrophyte-epiphyte biomass and productivity in an eelgrass (Zostera marina L.) community

The biomass, productivity (¹⁴C), and photosynthetic response to light and temperature of eelgrass, Zostera marina L. and its epiphytes was measured in a shallow estuarine system near Beaufort, North Carolina, during 1974. The maximum of the biomass (above-ground) was measured in March; this was followed by a general decline throughout the rest of the year. The average biomass was 105.0 g dry wt m^?2; 80.3 g dry wt m^?2 was eelgrass and 24.7 g dry wt m^?2 was epiphytes. The productivity of eelgrass averaged 0.88 mg C g^?1 h^?1 which was similar to that of the epiphytes, 0.65 mg C g^?1 h^?1. Eelgrass and epiphyte productivity was low during the spring and early summer, gave a maximum during late summer and fall, and declined during the winter; this progression was probably due to environmental factors associated with tidal heights. On an areal basis, the average annual productivity was 0.9 g C m^?2 day^?1 for eelgrass and 0.2 g C m^?2 day^?1 for the epiphytes. Rates of photosynthesis of both eelgrass and epiphytes increased with increasing temperature to an asymptotic value at which the system was light saturated. Both eelgrass and epiphytes had a temperature optimum of < 29 °C. A negative response to higher temperatures was also reflected in biomass measurements which showed the destruction of eelgrass with increasing summer temperatures. The data suggest that the primary productivity cycles of macrophytes and epiphytes are closely interrelated.     

Heterotrophic production of Chlorella sp. TISTR 8990—biomass growth and composition under various production conditions

The green microalga Chlorella sp. TISTR 8990 was grown heterotrophically in the dark using various concentrations of a basal glucose medium with a carbon‐to‐nitrogen mass ratio of 29:1. The final biomass concentration and the rate of growth were highest in the fivefold concentrated basal glucose medium (25 g L^?1 glucose, 2.5 g L^?1 KNO₃) in batch operations. Improving oxygen transfer in the culture by increasing the agitation rate and decreasing the culture volume in 500‐mL shake flasks improved growth and glucose utilization. A maximum biomass concentration of nearly 12 g L^?1 was obtained within 4 days at 300 rpm, 30°C, with a glucose utilization of nearly 76% in batch culture. The total fatty acid (TFA) content of the biomass and the TFA productivity were 102 mg g^?1 and 305 mg L^?1 day^?1, respectively. A repeated fed‐batch culture with four cycles of feeding with the fivefold concentrated medium in a 3‐L bioreactor was evaluated for biomass production. The total culture period was 11 days. A maximum biomass concentration of nearly 26 g L^?1 was obtained with a TFA productivity of 223 mg L^?1 day^?1. The final biomass contained (w/w) 13.5% lipids, 20.8% protein and 17.2% starch. Of the fatty acids produced, 52% (w/w) were saturated, 41% were monounsaturated and 7% were polyunsaturated (PUFA). A low content of PUFA in TFA feedstock is required for producing high quality biodiesel. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1589–1600, 2017     

The effect of light availability on the photosynthetic activity and productivity of outdoor cultures of Arthrospira platensis (Spirulina)

The basic requirement for establishing economically viable large-scale production of algal biomass, be it for food, feed, high-value product, or energy, is the ability to produce the biomass at a low price. To achieve this goal, an efficient production protocol is needed that ensures that the potential productivity is obtained at any given time. When productivity is defined by the ability to utilize the available solar radiation that drives photosynthesis, the production protocol must be optimized to meet this requirement. In the current study, we demonstrate that by modifying the light available to Arthrospira platensis cells cultured outdoors by a variety of options like modifying the standing biomass concentration, changing the mixing rate, or shading can change the potential photosynthetic activity and apparent activity. By optimizing the light available to algae cells under outdoor conditions, productivity can be increased by approximately 50 %, from 15.6 g m^?2 day^?1 in a culture that suffers from overexposure to light to 22.4 g m^?2 day^?1 in a culture in which light downregulation is minimized. Therefore, by using a variety of methodologies to estimate photosynthetic activity, we demonstrate that overexposing the cells to light may result in downregulation of the photosynthetic activity leading to photoinhibition and lower biomass productivity.     

Biomass and Lipid Production of Dinoflagellates and Raphidophytes in Indoor and Outdoor Photobioreactors

The principal fatty acids from the lipid profiles of two autochthonous dinoflagellates (Alexandrium minutum and Karlodinium veneficum) and one raphidophyte (Heterosigma akashiwo) maintained in bubble column photobioreactors under outdoor culture conditions are described for the first time. The biomass production, lipid content and lipid productivity of these three species were determined and the results compared to those obtained when the strains were cultured indoors. Under the latter condition, the biotic values did not significantly differ among species, whereas under outdoor conditions, differences in both duplication time and fatty acids content were observed. Specifically, A. minutum had higher biomass productivity (0.35 g·L^?1 day^?1), lipid productivity (80.7 mg lipid·L^?1 day^?1) and lipid concentration (252 mg lipid·L^?1) at harvest time (stationary phase) in outdoor conditions. In all three strains, the growth rate and physiological response to the light and temperature fluctuations of outdoor conditions greatly impacted the production parameters. Nonetheless, the species could be successfully grown in an outdoor photobioreactor and were of sufficient robustness to enable the establishment of long-term cultures yielding consistent biomass and lipid production.     

Biomass and lipid enhancement in Ankistrodesmus sp. cultured with reused and minimal nutrients media

Microalgae are a promising feedstock for biofuel production. Lipid content in microalgae could be enhanced under nutrient depletion. This work investigated the effect of the nutrient on lipid accumulation in Ankistrodesmus sp. culture. Batch cultures were carried out using fresh BG11 medium, and after the harvest, the medium was reused for the next culture; this method was repeated two times. The maximum lipid productivity of 29.75 mg L^?1 day^?1 was obtained from the culture with the second reuse medium. In continuous cultures, Ankistrodesmus sp. was cultured in both fresh and modified BG11 mediums. The modified BG11 medium was adjusted to resemble the content of the first reuse medium. As a comparison between batch and continuous cultures, it was proven that the productivity in the continuous culture was better than in the batch, where the achievable maximum biomass and lipid were 188.30 and 38.32 mg L^?1 day^?1. The maximum lipid content of 34.22% was obtained from the continuous culture at a dilution rate of 0.08 day^?1, whereas the maximum saturated and unsaturated fatty acid productivities of 79.96 and 104.54 mg L^?1 day^?1 were obtained at a dilution rate of 0.16 day^?1.     

Improvement of both lipid and biomass productivities of Qatar Chlorocystis isolate for biodiesel production and food security

Microalgae are considered a very promising alternative for biofuel production. Several strategies were developed to modulate and improve algae metabolites production to meet the requirements for biodiesel production. Most previous research evidenced that the increase of the lipid content is accompanied by a decrease of the biomass production, which increases the cost of the downstream processing. Hence, the challenge is to find special culture conditions that increase the lipid and the biomass productivities simultaneously. In the present work, we developed a strategy for the improvement of biomass and lipid productivities in a novel local microalga isolate, Chlorocystis sp. QUCCCM14, which was not previously known as a promising strain. Indeed, culturing QUCCCM14 using f/2 medium with 10× NaH₂PO₄ (0.15 g L^?1 NaNO₃ and 5.6 mg L^?1 NaH₂PO₄) resulted in an improvement of 3.178 folds the lipid productivity reaching 56.121 mg L^?1 day^?1 and enhanced the biomass productivity reaching 141.363 mg L^?1 day^?1, simultaneously. Comparative analyses of the FAME profiles demonstrated that fed‐batch culture with phosphate or nitrate separately leads to a high production of the omega 3 fatty acids (Linolenic acid), whereas fed‐batch culture with phosphate and nitrate simultaneously increased the production of fatty acids suitable for biodiesel production.