Structural hierarchy in molecular films of two class II hydrophobins

Hydrophobins are highly surface-active proteins that are specific to filamentous fungi. They function as coatings on various fungal structures, enable aerial growth of hyphae, and facilitate attachment to surfaces. Little is known about their structures and structure-function relationships. In this work we show highly organized surface layers of hydrophobins, representing the most detailed structural study of hydrophobin films so far. Langmuir-Blodgett films of class II hydrophobins HFBI and HFBII from Trichoderma reesei were prepared and analyzed by atomic force microscopy. The films showed highly ordered two-dimensional crystalline structures. By combining our recent results on small-angle X-ray scattering of hydrophobin solutions, we found that the unit cells in the films have dimensions similar to those of tetrameric aggregates found in solutions. Further analysis leads to a model in which the building blocks of the two-dimensional crystals are shape-persistent supramolecules consisting of four hydrophobin molecules. The results also indicate functional and structural differences between HFBI and HFBII that help to explain differences in their properties. The possibility that the highly organized surface assemblies of hydrophobins could allow a route for manufacturing functional surfaces is suggested.     

Self-assembled hydrophobin protein films at the air-water interface: structural analysis and molecular engineering

Hydrophobins are amphiphilic proteins produced by filamentous fungi. They function in a variety of roles that involve interfacial interactions, as in growth through the air-water interface, adhesion to surfaces, and formation of coatings on various fungal structures. In this work, we have studied the formation of films of the class II hydrophobin HFBI from Trichoderma reesei at the air-water interface. Analysis of hydrophobin aqueous solution drops showed that a protein film is formed at the air-water interface. This elastic film was clearly visible, and it appeared to cause the drops to take unusual shapes. Because adhesion and formation of coatings are important biological functions for hydrophobins, a closer structural analysis of the film was made. The method involved picking up the surface film onto a solid substrate and imaging the surface by atomic force microscopy. High-resolution images were obtained showing both the hydrophilic and hydrophobic sides of the film at nanometer resolution. It was found that the hydrophobin film had a highly ordered structure. To study the orientation of molecules and to obtain further insight in film formation, we made variants of HFBI that could be site specifically conjugated. We then used the avidin-biotin interaction as a probe. On the basis of this work, we suggest that the unusual interfacial properties of this type of hydrophobins are due to specific molecular interactions which lead to an ordered network of proteins in the surface films that have a thickness of only one molecule. The interactions between the proteins in the network are likely to be responsible for the unusual surface elasticity of the hydrophobin film.     

The Cys3-Cys4 loop of the hydrophobin EAS is not required for rodlet formation and surface activity

Class I hydrophobins are fungal proteins that self-assemble into robust amphipathic rodlet monolayers on the surface of aerial structures such as spores and fruiting bodies. These layers share many structural characteristics with amyloid fibrils and belong to the growing family of functional amyloid-like materials produced by microorganisms. Although the three-dimensional structure of the soluble monomeric form of a class I hydrophobin has been determined, little is known about the molecular structure of the rodlets or their assembly mechanism. Several models have been proposed, some of which suggest that the Cys3-Cys4 loop has a critical role in the initiation of assembly or in the polymeric structure. In order to provide insight into the relationship between hydrophobin sequence and rodlet assembly, we investigated the role of the Cys3-Cys4 loop in EAS, a class I hydrophobin from Neurospora crassa. Remarkably, deletion of up to 15 residues from this 25-residue loop does not impair rodlet formation or reduce the surface activity of the protein, and the physicochemical properties of rodlets formed by this mutant are indistinguishable from those of its full-length counterpart. In addition, the core structure of the truncation mutant is essentially unchanged. Molecular dynamics simulations carried out on the full-length protein and this truncation mutant binding to an air-water interface show that, although it is hydrophobic, the loop does not play a role in positioning the protein at the surface. These results demonstrate that the Cys3-Cys4 loop does not have an integral role in the formation or structure of the rodlets and that the major determinant of the unique properties of these proteins is the amphipathic core structure, which is likely to be preserved in all hydrophobins despite the high degree of sequence variation across the family.     

Nanoscale reduction in surface friction of polymer surfaces modified with Sc3 hydrophobin from Schizophyllum commune

Hydrophobins are amphipathic self-assembling proteins secreted by filamentous fungi that exhibit remarkable ability to modify synthetic surfaces. Thin coatings of Sc3 hydrophobin isolated from the wood-rotting fungus Schizophyllum commune were prepared via spin coating and adsorption techniques onto polymeric surfaces. Surface morphology and nanotribological characteristics of the films were evaluated using lateral force microscopy (LFM) and nanoindentation techniques. This paper reports the first observation of reduction in nanoscale relative surface friction of Sc3 hydrophobin protein modified polymeric surfaces. Relative friction coefficients were dramatically reduced and hydrophilicity increased for polymer surfaces modified with Sc3 hydrophobin thin films. Morphology of the protein films as well as degree of surface modification was observed to be a function of film formation technique and composition of the substrate.     

Crystal structures of hydrophobin HFBII in the presence of detergent implicate the formation of fibrils and monolayer films

Hydrophobins are small, amphiphilic proteins secreted by filamentous fungi. Their functionality arises from a patch of hydrophobic residues on the protein surface. Spontaneous self-assembly of hydrophobins leads to the formation of an amphiphilic layer that remarkably reduces the surface tension of water. We have determined by x-ray diffraction two new crystal structures of Trichoderma reesei hydrophobin HFBII in the presence of a detergent. The monoclinic crystal structure (2.2A resolution, R = 22, R(free) = 28) is composed of layers of hydrophobin molecules where the hydrophobic surface areas of the molecules are aligned within the layer. Viewed perpendicular to the aligned hydrophobic surface areas, the molecules in the layer pack together to form six-membered rings, thus leaving small pores in the layer. Similar packing has been observed in the atomic force microscopy images of the self-assembled layers of class II hydrophobin, indicating that the crystal structure resembles that of natural hydrophobin film. The orthorhombic crystal structure (1.0 A resolution, R = 13, R(free) = 15) is composed of fiber-like arrays of protein molecules. Rodlet structures have been observed on amphiphilic layers formed by class I hydrophobins; fibrils of class II hydrophobins appear by vigorous shaking. We propose that the structure of the fibrils and/or rodlets is similar to that observed in the crystal structure.     

Expression and purification of a functionally active class I fungal hydrophobin from the entomopathogenic fungus <Emphasis Type="Italic">Beauveria bassiana</Emphasis> in <Emphasis Type="Italic">E. coli</Emphasis>

Hydrophobins represent a class of unique fungal proteins that have low molecular mass, are cysteine rich, and can self-assemble into two-dimensional arrays at water/air interfaces. These highly surface-active proteins are able to decrease the surface tension of water, thus allowing fungal structures to penetrate hydrophobic–hydrophilic barriers. Due to their unusual biophysical properties, hydrophobins have been suggested for use in a wide range of biotechnological applications. Here we describe a simple method for producing a functionally active class I hydrophobin derived from the entomopathogenic fungus, Beauveria bassiana, in an E. coli host. N-terminal modifications were required for proper expression and purification, and the hydrophobin was expressed as a fusion partner to a cleavable N-terminus chitin-binding domain-intein construct. The protein was purified and reconstituted from E. coli inclusion bodies. Self-assembly of the recombinant hydrophobin was followed kinetically using a thioflavin T fluorescence binding assay, and contact angle measurements of purified recombinant hydrophobin protein (mHyd2) films on a variety of substrata demonstrated its surface modification ability, which remained stable for at least 4 months. Filament or fibril-like structures were imaged using atomic force and transmission electron microscopy. These data confirmed the functional properties of the purified protein and indicate amino acid flexibility at the N-terminus, which can be exploited for various applications of these proteins.     

Construction and Characterization of a CTLA-4-Targeted scFv–Melittin Fusion Protein as a Potential Immunosuppressive Agent for Organ Transplant

Immunotoxins with selective cytotoxicity are frequently used as therapeutic immunosuppressive agents in solid-organ transplantation because of their efficiency and high specificity. In this study, we present a new recombinant immunotoxin termed anti-CTLA-4-scFv–melittin prepared from Escherichia coli aimed at clearing activated T cells at the same time avoiding all-round decline in systematic immunity. This fusion protein is composed of anti-CTLA-4-scFv unit and melittin analog unit with properties of low immunogenicity and selective cytotoxicity to CTLA-4-positive T cells. In preliminary biological activity assays, our results confirmed the feasibility of activated T cell clearance strategy and there were significant differences in cell survival rates between CTLA-4-positive group and control group at all experimental concentrations of the immunotoxin. The selective cytotoxicity, low immunogenicity, and low production cost make it an attractive alternate to traditional immunosuppressants.     

Structure of T4 polyheads: II. A pathway of polyhead transformations as a model for T4 capsid maturation

We have studied the aberrant tubular polyheads of bacteriophages T4D and T2L as a model system for capsid maturation. Six different types of polyhead surface lattice morphology, and the corresponding protein compositions are reported and discussed. Using in vitro systems to induce transformations between particular polyhead types, we have deduced that the structural classes represent successive points in a transitional pathway. In the first step, coarse polyheads (analogous to the prohead τ-particle) are proteolytically cleaved by a phagecoded protease, a fragment of the gene 21 product. This cleavage of P23 to P23¹ induces a co-operative lattice transformation in the protein of the surface shell, to a conformation equivalent to that of T2L giant phage capsids. These polyheads (derived either from T4 or T2L lysates) can accept further T4-coded proteins. In doing so, they pass through intermediate structural states, eventually reaching an end point whose unit cell morphology is indistinguishable from that of the giant T4 capsids. At least one protein (called soc (Ishii & Yanagida, 1975)) is bound stoichiometrically to P23¹ in the end-state conformation. The simulation of several aspects of capsid maturation (cleavage of P23 to P23¹, stabilization, and lattice expansion) in the polyhead pathway suggest that it parallels the major events of phage T-even capsid maturation, decoupled from any involvement of DNA packaging.     

The functional role of Cys3–Cys4 loop in hydrophobin HGFI

Hydrophobins are a large group of low-molecular weight proteins. These proteins are highly surface-active and can form amphipathic membranes by self-assembling at hydrophobic–hydrophilic interfaces. Based on physical properties and hydropathy profiles, hydrophobins are divided into two classes. Upon the analysis of amino acid sequences and higher structures, some models suggest that the Cys3–Cys4 loop regions in class I and II hydrophobins can exhibit remarkable difference in their alignment and conformation, and have a critical role in the rodlets structure formation. To examine the requirement for the Cys3–Cys4 loop in class I hydrophobins, we used protein fusion technology to obtain a mutant protein HGFI-AR by replacing the amino acids between Cys3 and Cys4 of the class I hydrophobin HGFI from Grifola frondosa with those ones between Cys3 and Cys4 of the class II hydrophobin HFBI from Trichoderma reesei. The gene of the mutant protein HGFI-AR was successfully expressed in Pichia pastoris. Water contact angle (WCA) and X-ray photoelectron spectroscopy (XPS) measurements demonstrated that the purified HGFI-AR could form amphipathic membranes by self-assembling at mica and hydrophobic polystyrene surfaces. This property enabled them to alter the surface wettabilities of polystyrene and mica and change the elemental composition of siliconized glass. In comparison to recombinant class I hydrophobin HGFI (rHGFI), the membranes formed on hydrophobic surfaces by HGFI-AR were not robust enough to resist 1 % hot SDS washing. Atomic force microscopy (AFM) measurements indicated that unlike rHGFI, no rodlet structure was observed on the mutant protein HGFI-AR coated mica surface. In addition, when compared to rHGFI, no secondary structural change was detected by Circular Dichroism (CD) spectroscopy after HGFI-AR self-assembled at the water–air interface. HGFI-AR could not either be deemed responsible for the fluorescence intensity increase of Thioflavin T (THT) and the Congo Red (CR) absorption spectra shift (after the THT(CR)/HGFI-AR mixed aqueous solution was drastically vortexed). Remarkably, replacement of the Cys3–Cys4 loop could impair the rodlet formation of the class I hydrophobin HGFI. So, it could be speculated that the Cys3–Cys4 loop plays an important role in conformation and functionality, when the class I hydrophobin HGFI self-assembles at hydrophobic–hydrophilic interfaces.     

A Sandwiched-Culture Technique for Evaluation of Heterologous Protein Production in a Filamentous Fungus

Aspergillus niger is known for its efficient excretion machinery. However, problems have often arisen in obtaining high amounts of heterologous proteins in the culture medium. Here we present a quick method using sandwiched colonies to evaluate transgenic strains for secretion of heterologous proteins. Expressing the ABH1 hydrophobin of Agaricus bisporus in A. niger, we showed that low production levels of the heterologous protein are probably due to extracellular proteolytic degradation of the protein.     

The Exomer Coat Complex Transports Fus1p to the Plasma Membrane via a Novel Plasma Membrane Sorting Signal in Yeast

Sorting of transmembrane cargo proteins to different cellular compartments is mediated by sorting signals that are recognized by coat proteins involved in vesicle biogenesis. We have identified a sorting signal in the yeast cell fusion protein Fus1p that is required for its transport from the trans-Golgi compartment to the plasma membrane. Transport of Fus1p from the trans-Golgi to the cell surface is dependent on Chs5p, a component of the multisubunit exomer complex. We show that Fus1p transport is also dependent on the exomer components Bch1p and Bud7p. Disruption of the clathrin adaptor protein complex 1 (AP-1) restores Fus1p localization to the cell surface in the absence of exomer, possibly by promoting an alternate, exomer-independent route of transport. Mutation of an IXTPK sequence in the cytosolic tail of Fus1p abolishes its physical interaction with Chs5p, results in mislocalization of Fus1p, and therefore causes a cell fusion defect. These defects are suppressed by disruption of AP-1. We suggest that IXTPK comprises a novel sorting signal that is recognized and bound by exomer leading to the capture of Fus1p into coated vesicles en route to the cell surface.     

枯草芽孢杆菌疏水蛋白BslA的结构及应用

疏水蛋白(Hydrophobin)是具有表面活性的小分子量蛋白质,可以在界面自组装形成双亲性蛋白膜,从而改变界面亲疏水性。研究表明疏水蛋白无毒性且无免疫原性,基于这样的性质,疏水蛋白可用于材料表面修饰、食品塑形剂、纳米药物载体而进行靶向运输或生物传感器的信号精确识别等。近年来,在枯草芽孢杆菌生物被膜中发现了一种分泌型小分子量疏水蛋白BslA (原名YuaB)。研究表明,枯草芽孢杆菌疏水蛋白BslA表达产量高,纯化过程简单、易于操作,可实现大规模生产,因而BslA具有更大的应用优势和开发价值。本文总结了BslA的性质、功能、结构等方面的信息,并与真菌疏水蛋白进行了比较分析,系统分析了其结构特点及应用价值。     

BamA is a pivotal protein in cell envelope synthesis and cell division in Deinococcus radiodurans

The beta-barrel assembly machinery (BAM) is an indispensable complex for protein transportation located at the outer membrane of bacteria. BAM is composed of five subunits (BamA-E) in the model bacterium Escherichia coli. DR_0379 is a BamA homolog in Deinococcus radiodurans, but the other subunits have not been detected in this species. In the present study, deletion of bamA resulted in decreased growth rate and altered morphology of D. radiodurans. ΔbamA cells underwent abnormal cell division, leading to aggregated bacteria of diverse size and shape, and the cell envelope was detached from the cell surface, resulting in reduced resistance to high ionic strength. Oxidative stress resistance was significantly enhanced in the mutant, which may be attributed to increased manganese ion concentration and Mn/Fe ratio. Numerous proteins were released into the medium from ΔbamA cells, including surface layer (S-layer) proteins and various transporters located in the periplasm and outer membrane. These results indicate that BamA affects the synthesis and assembly of the outer membrane and S-layer, and thereby influences material transport and cell division. The findings highlight the special functions of BamA in D. radiodurans, and promote our understanding of the multi-layer structure of the D. radiodurans cell envelope.     

Cell surface display of chimeric glycoproteins via the S-layer of Paenibacillus alvei

The Gram-positive, mesophilic bacterium Paenibacillus alvei CCM 2051^T possesses a two-dimensional crystalline protein surface layer (S-layer) with oblique lattice symmetry composed of a single type of O-glycoprotein species. Herein, we describe a strategy for nanopatterned in vivo cell surface co-display of peptide and glycan epitopes based on this S-layer glycoprotein self-assembly system. The open reading frame of the corresponding structural gene spaA codes for a protein of 983 amino acids, including a signal peptide of 24 amino acids. The mature S-layer protein has a theoretical molecular mass of 105.95 kDa and a calculated pI of 5.83. It contains three S-layer homology domains at the N-terminus that are involved in anchoring of the glycoprotein via a non-classical, pyruvylated secondary cell wall polymer to the peptidoglycan layer of the cell wall. For this polymer, several putative biosynthesis enzymes were identified upstream of the spaA gene. For in vivo cell surface display, the hexahistidine tag and the enhanced green fluorescent protein, respectively, were translationally fused to the C-terminus of SpaA. Immunoblot analysis, immunofluorescence staining, and fluorescence microscopy revealed that the fused epitopes were efficiently expressed and successfully displayed via the S-layer glycoprotein matrix on the surface of P. alvei CCM 2051^T cells. In contrast, exclusively non-glycosylated chimeric SpaA proteins were displayed, when the S-layer of the glycosylation-deficient wsfP mutant was used as a display matrix.     

Direct Observation of Parallel Folding Pathways Revealed Using a Symmetric Repeat Protein System

Although progress has been made to determine the native fold of a polypeptide from its primary structure, the diversity of pathways that connect the unfolded and folded states has not been adequately explored. Theoretical and computational studies predict that proteins fold through parallel pathways on funneled energy landscapes, although experimental detection of pathway diversity has been challenging. Here, we exploit the high translational symmetry and the direct length variation afforded by linear repeat proteins to directly detect folding through parallel pathways. By comparing folding rates of consensus ankyrin repeat proteins (CARPs), we find a clear increase in folding rates with increasing size and repeat number, although the size of the transition states (estimated from denaturant sensitivity) remains unchanged. The increase in folding rate with chain length, as opposed to a decrease expected from typical models for globular proteins, is a clear demonstration of parallel pathways. This conclusion is not dependent on extensive curve-fitting or structural perturbation of protein structure. By globally fitting a simple parallel-Ising pathway model, we have directly measured nucleation and propagation rates in protein folding, and have quantified the fluxes along each path, providing a detailed energy landscape for folding. This finding of parallel pathways differs from results from kinetic studies of repeat-proteins composed of sequence-variable repeats, where modest repeat-to-repeat energy variation coalesces folding into a single, dominant channel. Thus, for globular proteins, which have much higher variation in local structure and topology, parallel pathways are expected to be the exception rather than the rule.     

Outer cell envelope membrane and shape of Spirillum serpens.

“Ghosts” have been isolated from Spirillum serpens that are free of murein, are surrounded by a unit membrane (derived from the outer membrane of the cell envelope), have lost all intracellular material (except for some poly-β-hydroxybutyrate), and still maintain Spirillum's shape.The ghost membrane contains about 50% protein which is resolved by sodium dodecyl sulphate-polyacrylamide gel electrophoresis into three bands corresponding to apparent molecular weights between 21,000 and 40,000, and the major protein band I (40,000) consists of at least two (Ia and Ib) but not many more polypeptide chains. HP-layer protein (hexagonally packed surface protein) is absent. At least one of the latter polypeptide chains is required for the establishment of the long-range order apparent in ghosts since proteases degrade band I proteins and concomitantly destroy the ghost. The other polypeptides (II and III) do not appear to be required for maintenance of shape of the Spirillum ghost since their amounts can vary widely from preparation to preparation. Ghosts as well as cells can be cross-linked with dimethyl diimidoesters. Such ghosts proved to be cross-linked over their entire surface, and a covalently closed macromolecule of the size of the cell had been created. Under certain conditions of cross-linking these ghosts upon extraction with hot sodium dodecyl sulphate were pure protein. Ammonolysis of this material liberated band I protein.These findings strongly suggest that there is a rather dense packing of the protein in the ghost membrane, and proteins Ia and Ib may be arranged as repeating subunits in the sense that protein-protein interaction exists along the whole membrane. Several observations also suggest that the ghost membrane concerning the arrangement of these proteins does not represent a gross artifact regarding the outer cell envelope membrane. The possibility exists that the assembly of polypeptides Ia and Ib participates in the determination of cellular shape.     

Novel Hydrophobic Surface Binding Protein, HsbA, Produced by Aspergillus oryzae

Hydrophobic surface binding protein A (HsbA) is a secreted protein (14.5 kDa) isolated from the culture broth of Aspergillus oryzae RIB40 grown in a medium containing polybutylene succinate-co-adipate (PBSA) as a sole carbon source. We purified HsbA from the culture broth and determined its N-terminal amino acid sequence. We found a DNA sequence encoding a protein whose N terminus matched that of purified HsbA in the A. ozyzae genomic sequence. We cloned the hsbA genomic DNA and cDNA from A. oryzae and constructed a recombinant A. oryzae strain highly expressing hsbA. Orthologues of HsbA were present in animal pathogenic and entomopathogenic fungi. Heterologously synthesized HsbA was purified and biochemically characterized. Although the HsbA amino acid sequence suggests that HsbA may be hydrophilic, HsbA adsorbed to hydrophobic PBSA surfaces in the presence of NaCl or CaCl₂. When HsbA was adsorbed on the hydrophobic PBSA surfaces, it promoted PBSA degradation via the CutL1 polyesterase. CutL1 interacts directly with HsbA attached to the hydrophobic QCM electrode surface. These results suggest that when HsbA is adsorbed onto the PBSA surface, it recruits CutL1, and that when CutL1 is accumulated on the PBSA surface, it stimulates PBSA degradation. We previously reported that when the A. oryzae hydrophobin RolA is bound to PBSA surfaces, it too specifically recruits CutL1. Since HsbA is not a hydrophobin, A. oryzae may use several types of proteins to recruit lytic enzymes to the surface of hydrophobic solid materials and promote their degradation.     

Hydrophobins: New prospects for biotechnology

Hydrophobins are small amphipathic molecules found uniquely in fungi. They perform crucial roles in allowing filamentous species to break through interfaces during aerial hyphae formation, sporulation, fruit body production and cell penetration. Initial biotechnological applications have exploited materials coated with hydrophobins to switch hydrophobic surfaces to hydrophilic and vice versa. Recent improvements in our understanding of the biophysics of hydrophobin layer formation, including the use of mixed types of molecules, together with advances in genomics promise to extend greatly the potential for hydrophobin biotechnologies.     

Organization of the outer layers of the cell envelope of Corynebacterium glutamicum: A combined freeze-etch electron microscopy and biochemical study

The cell surface of Corynebacterium glutamicum grown on solid medium was totally covered with a highly ordered, hexagonal surface layer. Also, freeze-fracture revealed two fracture surfaces which were totally covered with ordered arrays displaying an hexagonal arrangement and the same unit cell dimension as the surface layer. The ordered arrays on the concave fracture surface, closest to the cell surface, were due to the presence of particles while those on the convex fracture surface were their imprints. The same cells grown on liquid medium displayed a cell surface and fracture surfaces only partially covered with ordered arrays. In this case, the ordered regions had the same relative position on the cell surface and on the fracture surfaces. All ordered arrays were totally absent in a mutant for cspB, the gene encoding PS2, one of the two major cell wall proteins. Treatment of the cells with proteinase K caused the gradual alteration of PS2 into a slightly lower molecular mass form. This was accompanied by a concomitant disappearance of the ordered fracture surfaces followed by the detachment of the ordered surface layer from the cell as large ordered patches displaying the same lattice symmetry and dimension as those of the surface layer. The ordered patches were isolated. They contained the totality of PS2 initially associated with the cell. We conclude that the highly ordered surface layer of the intact cell was composed of PS2 interacting strongly with some cell wall material leading to its organization. This organized cell wall material produced the ordered fracture surfaces. We show that in the absence of intact PS2 protein on the cell wall, the same cell wall material was not organized and formed a structureless smooth layer.     

Isolation and Characterization of a Cyanophage Infecting the Toxic Cyanobacterium Microcystis aeruginosa

We isolated a cyanophage (Ma-LMM01) that specifically infects a toxic strain of the bloom-forming cyanobacterium Microcystis aeruginosa. Transmission electron microscopy showed that the virion is composed of anisometric head and a tail complex consisting of a central tube and a contractile sheath with helical symmetry. The morphological features and the host specificity suggest that Ma-LMM01 is a member of the cyanomyovirus group. Using semi-one-step growth experiments, the latent period and burst size were estimated to be 6 to 12 h and 50 to 120 infectious units per cell, respectively. The size of the phage genome was estimated to be ca. 160 kbp using pulse-field gel electrophoresis; the nucleic acid was sensitive to DNase I, Bal31, and all 14 restriction enzymes tested, suggesting that it is a linear double-stranded DNA having a low level of methylation. Phylogenetic analyses based on the deduced amino acid sequences of two open reading frames coding for ribonucleotide reductase alpha- and beta-subunits showed that Ma-LMM01 forms a sister group with marine and freshwater cyanobacteria and is apparently distinct from T4-like phages. Phylogenetic analysis of the deduced amino acid sequence of the putative sheath protein showed that Ma-LMM01 does not form a monophyletic group with either the T4-like phages or prophages, suggesting that Ma-LMM01 is distinct from other T4-like phages that have been described despite morphological similarity. The host-phage system which we studied is expected to contribute to our understanding of the ecology of Microcystis blooms and the genetics of cyanophages, and our results suggest the phages could be used to control toxic cyanobacterial blooms.