酵母菌合成2-苯乙醇的研究进展

2-苯乙醇是一种具有令人愉悦的玫瑰风味的芳香醇,在食品、化妆品和药品等领域具有广泛的应用。本文对酵母菌合成2-苯乙醇的代谢途径及其调控过程、以及提高2-苯乙醇产量的国内外研究进展进行了综述,并对通过微生物转化法合成2-苯乙醇目前存在的不足及进一步研究方向进行了讨论。     

Recent advances in biotechnological production of 2-phenylethanol

2-Phenylethanol (2-PE) is an important aromatic alcohol with a rose-like fragrance. It has been widely applied in the cosmetic, perfume, and food industries and is mainly produced by chemical synthesis. An alternative method for the production of natural flavors and fragrances is the microbial transformation process, which is attracting increasing attention because it is an environmentally friendly process and the products are considered “natural”. The production of 2-PE from L-phenylalanine by biotransformation is possible through the Ehrlich pathway and considerable progress has been made in the development of this process. The present report reviews recent advances in biotechnological production of 2-PE, with emphasis on the strategies used to increase production and the applications of in situ product removal techniques. Future research should focus on product scale-up and product recovery processes for the industrialization of microbial processes.     

酵母2-苯乙醇耐受性的研究进展

2-苯乙醇(2-phenylethanol, 2-PE)是一种可食用且有玫瑰香味的高级芳香醇,常用于食品、化妆品和药品行业。由于物理和化学法制备2-PE得率低,不适用于工业生产。而作为单细胞真核微生物的酵母具有高效合成“天然” 2-PE的潜力,因此酵母作为底盘微生物合成2-PE的策略深受研究者青睐。然而,在酵母进行2-PE发酵过程中不免会受到2-PE毒害作用影响。因此,亟须研究酵母耐受2-PE的机制为生产实际提供理论基础,这也有助于选育具有较高2-PE耐受性的酵母菌株。本文综述了酵母2-PE耐受性的研究进展,从酵母2-PE合成途径、2-PE耐受性机理等方面进行阐述,主要说明提升酵母2-PE耐受性的方法。掌握酵母2-PE耐受机制,最终提升酵母2-PE产量及转化效率是今后研究的重中之重。     

Bioprocesses for 2-phenylethanol and 2-phenylethyl acetate production: current state and perspectives

2-Phenylethanol (2-PE) and 2-phenethyl acetate (2-PEA) are valuable generally recognized as safe flavoring agents widely used in industry. Perfumes, pharmaceuticals, polishes, and personal care products, are some of the final products using these compounds as additives due to their rose-like odor. Also, 2-PE is used in disinfectants, pest control, and cleaning products due to its biocide capability. Although most of these additives production are derived from chemical synthesis, the current trend of consumers to prefer natural products has contributed to the development of biotechnological approaches as an alternative way to obtain natural 2-PE and 2-PEA. The most efficient route to bioproduce these compounds is through the bioconversion of L-phenylalanine via the Ehrlich pathway, and most of the advances have been focused on the development of this process. This review compiles the most recent developments in the biotechnological production of 2-PE and 2-PEA, indicating the most studied strains producing 2-PE and 2-PEA, the current advances in the in situ product recovery in liquid systems, an overview of the strain developments, and the progress in the use of residue-based systems. Future research should address the need for more sustainable and economic systems such as those using wastes as raw materials, as well as the scale-up of the proposed technologies.

     

Production and purification of 2-phenylethanol by Saccharomyces cerevisiae using tobacco waste extract as a substrate

2-phenylethanol (2-PE), which is extracted naturally from plant or biotechnology processing, is widely used in the food and cosmetics industries. Due to the high cost of 2-PE production, the valorization of waste carbon to produce 2-PE has gained increasing attention. Here, 2-PE was produced by Saccharomyces cerevisiae using tobacco waste extract (TWE) as the substrate. Considering the toxicity of nicotine and its inhibition of 2-PE, the tolerance of S. cerevisiae was first evaluated. The results suggested that the production of 2-PE by S. cerevisiae in TWEs could be carried out at 2·0 mg ml⁻¹ nicotine concentrations and may be inhibited by 1·0 mg ml⁻¹ 2-PE. Thus, the compounds in the TWEs prepared at different temperatures were detected, and the results revealed that the TWEs prepared at 140°C contained 2·18 mg ml⁻¹ of nicotine, had total sugar concentrations of 26·8 mg ml⁻¹ and were suitable for 2-PE production. Due to feedback regulation, the 2-PE production was only 1·11 mg ml⁻¹, and the remaining glucose concentration remained at 13·78 mg ml⁻¹, which indicated insufficient glucose utilization. Then, in situ product recovery was further implemented to remove this inhibition; the glucose utilization (the remaining concentration decreased to 3·64 mg ml⁻¹) increased, and the 2-PE production increased to 1·65 mg ml⁻¹. The 2-PE produced in the fermentation broth was first isolated by elution from the resin with 75% ethanol and then by removing the impurities with 2·5% activated charcoal, and pure 2-PE was identified by gas chromatography mass spectrometry. The results of this study suggest that TWE could be an alternative carbon source for 2-PE production. This could provide an outlet tobacco waste as well as reducing the price of natural 2-PE, although more strategies need to be explored to improve the production yield of 2-PE by using TWE.     

Screening of Yeasts Isolated from Brazilian Environments for the 2-Phenylethanol (2-PE) Production

Phenylethanol alcohol, or 2-phenylethanol (2-PE) production by yeasts has been considered a promising alternative to its chemical synthesis. In order to evaluate the potential of yeast strains isolated from different Brazilian environments, we evaluated the 2-PE production of 267 strains. Among them, the Kluyveromyces marxianus CCT 7735 yeast stood out as being the best 2-PE producer. The K. marxianus CCT 7735 growth was impaired by 2-PE; nevertheless, this effect is less pronounced than the inhibition reported for certain Saccharomyces cerevisiae strains. The maximum 2-PE titer obtained under optimized conditions was 3.44 g/L, 28% higher than the titer achieved under unoptimized conditions. The optimized conditions were: 30ºC, and glucose and L-phe concentrations of 3.0 and 4.0 g/L, respectively. Moreover, the specific production rate of 2-PE increased twofold compared to the unoptimized conditions.     

Yarrowia lipolytica: the novel and promising 2-phenylethanol producer

This is the first report on the ability of Yarrowia lipolytica strains to produce 2-phenylethanol (2-PE), which has not been identified for this species to date. 2-PE is a valuable aroma compound of rose-like odor. Its isolation from the other than microbial source—rose petals, is limited by the substrate availability. Thus, this chemical compound constitutes an attractive product for biotechnological conversions. To date, the ability to produce 2-PE has been described for such genera as Saccharomyces sp., Kluyveromyces sp., Geotrichum sp., and Pichia sp. This report provides evidence that Y. lipolytica is a novel 2-PE producer. Moreover, the titers of 2-PE obtained in Y. lipolytica NCYC3825 non-optimized cultures, nearly 2 g/l, are competitive to titers obtained by the other species.     

微生物合成2-苯乙醇研究进展*

2-苯乙醇(2-PE)是一种具有广阔应用前景的高级芳香醇。由于化学合成的复杂性和天然提取的高昂成本,近年来,利用微生物发酵合成2-PE受到广泛关注。许多微生物有天然合成2-PE的能力,但产量相对较低,并不适合大规模生产。在最近几年的研究中,利用代谢工程和合成生物学技术,通过上调限速酶基因表达水平,改善前体转运,提高 2-PE耐受性等多方面优化,2-PE的微生物产量有了大幅度的提高。综述微生物合成2-PE的相关研究进展,分析关键代谢调控的机制,并就目前存在的问题提出了改进建议。     

生物转化法合成2-苯乙醇的研究进展

2-苯乙醇(2-phenylethanol,2-PE)是具有玫瑰香味的芳香醇,在食品、化妆品以及药品领域有着广泛的应用。但是从植物花卉中提取的天然2-苯乙醇产量低,成本高。目前,用微生物转化生产"天然"2-苯乙醇越来越受到关注。本文对近年来国内外报道的提高微生物转化合成2-苯乙醇产量的研究,尤其是生产菌株选育和发酵工程优化的研究进行了综述,并提出今后研究的新思路,旨在为利用微生物发酵进行2-苯乙醇生产提供参考。     

Biosynthesis of 2-phenylethanol using tobacco waste as feedstock

Abstract

2-Phenylethanol (2-PE) is an aromatic alcohol with a rose-like odour, which is widely used in the food, drink and cosmetic industry. It also present in cigarette aromas. As a unique renewable biomass, tobacco contains abundant aromatic compounds, but is rarely used as a feedstock for synthesizing bio-based products. In this study, it was found that 2-PE can be produced from tobacco waste by Saccharomyces cerevisiae. Plackett–Burman design, steepest ascent design and Box–Behnken designs were applied to optimize the fermentation bioprocess, and the maximum titre of 2-PE reached 1.55 g/l. The study explored a new method of 2-PE production and also provided a valuable way to utilize tobacco waste.     

Advances in 2-phenylethanol production from engineered microorganisms

2-Phenylethanol (2-PE) is an important flavor ingredient with a rose-like odor. Due to concerns about the toxic byproducts potentially found in 2-PE from chemical synthesis, consumers prefer the natural aroma compound, promoting the biosynthesis of 2-PE. Various microorganisms produce 2-PE naturally with low yield. Recent metabolic engineering strategies in yeasts and Escherichia coli have achieved great success in improving 2-PE bioproduction, including the alleviation of feed-back inhibition, improvement of precursor transport, enhancing activities of crucial enzymes, and reduction of by-products. Here, we review the metabolic engineering strategies applied to microorganisms for increasing bioproduction of 2-PE, address current problems, and propose further improvements.     

2-phenylethanol (rose aroma) production potential of an isolated pichia kudriavzevii through solid-state fermentation

2-phenylethanol (2-PE) is a higher alcohol widely used in industry that can be obtained by solid-state fermentation (SSF) using low-cost raw materials. This report describes the 2-PE production potential of an indigenous Pichia kudriavzevii isolated from solid-state fermented sugarcane bagasse that possesses attractive characteristics for processing waste streams such as its low-pH tolerance, high growth rate and temperature resistance. Besides, 2-PE production was optimized in batch-SSF using sugarcane bagasse supplemented with l-phenylalanine as substrate. Full factorial design allowed identifying the pH adjustment, micronutrient addition, inoculum and co-substrate load effects, and response surface methodology served to identify the maximum production based on temperature, initial moisture content (MC₀) and specific airflow rate (S_AFR). While the pH adjustment and micronutrient addition did not affect the 2-PE production, temperature and MC₀ resulted critical for the process. After optimization, the maximum 2-PE content was 27.2 ± 0.2 mg per gram of dry substrate at 31 °C, 76 % MC₀ and 0.129 L h⁻¹ g⁻¹ S_AFR. This result was 23.8 % higher than the sub-optimal condition, and it is the highest 2-PE production via SSF reported so far. These results confirm the ability of P. kudriavzevii for producing 2-PE, and its potential for using waste streams as substrate.     

Production of 2-phenylethanol and 2-phenylethylacetate from L-phenylalanine by coupling whole-cell biocatalysis with organophilic pervaporation

An integrated bioprocess for the production of the natural rose-like aroma compounds, 2-phenylethanol (2-PE) and 2-phenylethylacetate (2-PEAc), from L-phenylalanine (L-phe) with yeasts was investigated. The hydrophobicity of the products leads to product inhibition, which can be compensated by in situ product removal (ISPR). An organophilic pervaporation unit, equipped with a polyoctylmethylsiloxane (POMS) membrane, was coupled via a bypass to a bioreactor and proved to be a suitable technique for the in situ removal of high-boiling products from culture broth. With batch cultures of the thermotolerant yeast Kluyveromyces marxianus CBS 600 in a standard medium at 35 degrees C, the use of pervaporation resulted in a double 2-PE concentration (2.2 g/L) and 1.3 g/L 2-PEAc, which only accumulated transiently in low concentrations during cultivation without ISPR. Using a previously optimized medium, the variation of the temperature from 30 degrees C to 40 degrees C caused an increase in the total conversion yield from 63% to 79%, corresponding to total product concentrations of 5.23 and 5.85 g/L, respectively. In the 40 degrees C batch experiment, the volumetric productivity (2-PE + 2-PEAc) during the exponential phase was 5.2 mmol/L h. While for 2-PE, there is still potential for further optimization, the more hydrophobic 2-PEAc was nearly completely removed from the aqueous culture broth (enrichment factor >400), resulting in highly aroma-enriched permeates. Due to the temperature-correlated performance of the pervaporation, the bioconversion was still efficient even at 45 degrees C (conversion yield: 69%). Surprisingly, at 45 degrees C, the molar ratio of the two products inverted and 2-PEAc turned out to be the main product (4.0 g/L), which opens easy control of the reaction's selectivity by external means. Retrofitting the process with interim heating and cooling equipment to use different temperature levels for cultivation and pervaporation resulted in a decreased yield and product concentration caused by multiple stress factors. The medium composition affected the pervaporation efficiency with molasses acting detrimental.     

Enhanced Biotransformation of 2-Phenylethanol with Ethanol Oxidation in a Solid–Liquid Two-Phase System by Active Dry Yeast

2-Phenylethanol (2-PE) can be produced from l-phenylalanine (l-Phe) with the oxidation degradation of ethanol by active dry yeast. In this study, the catalysis effect of ethanol on biotransforming l-Phe into 2-PE by yeast was evaluated and optimized. The results indicated that increasing ethanol concentration was beneficial for enhancing 2-PE concentration but lowered the 2-PE productivity. Initial ethanol concentration above 25 g/l could strongly inhibit the 2-PE production. To obtain 2-PE with desirable concentrations with an economical operation mode, three fed-batch biotransformation operation methods using ethanol or/and glucose were carried out in a solid–liquid two-phase system. When using ethanol alone with the initial concentration of 10 g/l, the total concentration and overall productivity of 2-PE were 7.6 g/l and 0.065 g l⁻¹ h⁻¹, respectively. Furthermore, an experiment with controlled glucose solely (higher than 2 g/l) was finished. In this case, phenylacetaldehyde (PA) was detected along with ethanol accumulation, suggesting that reaction of PA → 2-PE in Ehrlich pathway was inhibited. To further enhance 2-PE production by using glucose only, a novel operation strategy to simultaneously control rates of glucose glycolysis and ethanol oxidative degradation with the aid of ISPR techniques was developed. With this strategy, 2-PE concentration and yield based on glucose consumption reached a higher level of 14.8 g/l and 0.12 g-PE/g-glucose, respectively, and these are the highest values reported up to date with the fed-batch biotransformation operation mode.     

The biosynthesis of A2E, a fluorophore of aging retina, involves the formation of the precursor, A2-PE, in the photoreceptor outer segment membrane

The autofluorescent lipofuscin that accumulates in retinal pigment epithelial cells with age may contribute to an age-related decline in cell function. The major lipofuscin fluorophore, A2E, is a pyridinium bisretinoid. We previously proposed that the biogenesis of A2E involves the following: (i) formation of the Schiff base, N-retinylidene phosphatidylethanolamine from all-trans-retinal and phosphatidylethanolamine in the photoreceptor outer segment membrane; (ii) further reaction of N-retinylidene phosphatidylethanolamine with retinal to yield phosphatidylethanolamine-bisretinoid, A2-PE; (iii) hydrolysis of A2-PE to generate A2E. To provide evidence for this biogenic scheme, all-trans-retinal was reacted with dipalmitoyl-l-alpha-phosphatidylethanolamine to yield DP-A2-PE (A2-PE), as confirmed by UV, with mass spectrometry revealing the molecular ion at m/z 1222.9 (C(77)H(124)O(8)PN) accompanied by product ion at m/z 672.8, representing the phosphoryl-A2E fragment of A2-PE. In reaction mixtures of retinal and outer segments and in samples of Royal College of Surgeons rat retina containing outer segment membranous debris, A2-PE was detected as a series of high performance liquid chromatography peaks, each with UV similar to reference A2-PE. By mass spectrometry, A2-PE consisted of multiple peaks, representing fatty acids with different chain lengths, and the phosphoryl-A2E moiety, m/z 673. Incubation of the retinal/outer segment reaction mixture with phospholipase D generated A2E, as detected by high performance liquid chromatography, thus confirming A2-PE as the A2E precursor.     

Modeling of an integrated fermentation/membrane extraction process for the production of 2-phenylethanol and 2-phenylethylacetate

An unstructured model for an integrated fermentation/membrane extraction process for the production of the aroma compounds 2-phenylethanol and 2-phenylethylacetate by Kluyveromyces marxianus CBS 600 was developed. The extent to which this model, based only on data from the conventional fermentation and separation processes, provided an estimation of the integrated process was evaluated. The effect of product inhibition on specific growth rate and on biomass yield by both aroma compounds was approximated by multivariate regression. Simulations of the respective submodels for fermentation and the separation process matched well with experimental results. With respect to the in situ product removal (ISPR) process, the effect of reduced product inhibition due to product removal on specific growth rate and biomass yield was predicted adequately by the model simulations. Overall product yields were increased considerably in this process (4.0 g/L 2-PE+2-PEA vs. 1.4 g/L in conventional fermentation) and were even higher than predicted by the model. To describe the effect of product concentration on product formation itself, the model was extended using results from the conventional and the ISPR process, thus agreement between model and experimental data improved notably. Therefore, this model can be a useful tool for the development and optimization of an efficient integrated bioprocess.     

In vitro and in vivo suppression of interleukin-2-activated killer cell activity by chimeric proteins between interleukin-2 and Pseudomonas exotoxin.

The biological effects of IL-2 are mediated through high (complex of alpha and beta chain) or intermediate (beta chain) affinity IL-2 receptors. Previously, chimeric proteins composed of IL-2 and Pseudomonas exotoxin (IL-2-PE) were shown to be specifically cytotoxic to cells bearing IL-2 receptors. It has also been shown that IL-2-PE chimeric proteins can abrogate T cell-mediated immune response in vitro. In the current study, we have investigated the effects of IL-2-PE on LAK activity both in vivo and in vitro. We administered either IL-2-PE40 (comprised of IL-2 and 40-kDa portion of PE) or IL-2-PE66 (comprised of IL-2 and 66-kDa molecule of PE) to normal C57BL/6 mice for 3 or 8 days and LAK activity was assessed in various organs of mice. We found that IL-2-PE40 generated LAK activity in various compartments of mice and the level of activity was slightly lower than that observed with an equivalent amount of recombinant (r) IL-2 alone. However, IL-2-PE66 failed to generate LAK activity which would have been induced due to an equivalent concentration of rIL-2. IL-2-PE66 also did not induce LAK activity from the splenocytes during in vitro culture while IL-2-PE40 generated good LAK activity. An equivalent amount of IL-2 also generated potent LAK activity. The suppression of LAK activity by IL-2-PE66 was also evident in cells preactivated with IL-2; however, this inhibition was partial. The suppressive activity of IL-2-PE66 was shown to be mediated through IL-2 receptor interactions as excess amounts of rIL-2 were able to abrogate its effect. Both IL-2 toxins were equivalently cytotoxic to IL-2 receptor-bearing HUT 102 cells and both were able to compete from high and intermediate affinity IL-2 receptors. Taken together, our data indicate that IL-2-PE66 is highly cytotoxic to LAK cells while IL-2-PE40 is less cytotoxic. Thus, data from our study and from other published reports indicate that IL-2-PE66 is more potent immunosuppressive agent than IL-2-PE40.