Comparative reactivity of triorganosilanes, HSi(OEt)3 and HSiEt3, with IrCl(CO)(PPh3)2. Formation of IrCl(H)2(CO)(PPh3)2 or Ir(H)2(SiEt3)(CO)(PPh3)2 depending on the substituents at Si

Reaction of HSi(OEt)₃ with IrCl(CO)(PPh₃)₂ (5:1 molar ratio) at room temperature for 1 h gives IrCl(H){Si(OEt)₃}(CO)(PPh₃)₂ (1), which is observed by the ¹H and ³¹P{¹H} NMR spectra of the reaction mixture. The same reaction, but in 20:1 molar ratio at 50 °C for 24 h produces IrCl(H)₂(CO)(PPh₃)₂ (2) rather than the expected product Ir(H)₂{Si(OEt)₃}(CO)(PPh₃)₂ (3) that was previously reported to be formed by this reaction. Accompanying formation of Si(OEt)₄, (EtO)₃SiOSi(OEt)₃, and (EtO)₂HSiOSi(OEt)₃ is observed. On the other hand, trialkylhydrosilane HSiEt₃ reacts with IrCl(CO)(PPh₃)₂ (10:1 molar ratio) at 80 °C for 84 h to give Ir(H)₂(SiEt₃)(CO)(PPh₃)₂ (4) in a high yield, accompanying with a release of ClSiEt₃.     

Synthesis, structure and reactivity of complexes containing [M(S2)2] fragments (M=Ru, Os; (S2)=1,2-benzenedithiolate (2−))

Subsequent addition of 1,2-benzenedithiol (S₂-H₂) and nBuLi to a solution of [Ru(NO)Cl₃ · xMeOH] in THF afforded exclusively the monomeric species NBu₄[Ru^II(NO)(S₂)₂] (1). Formation of dimeric (NBu₄)₂[Ru^II(NO)(S₂)₂]₂ (2) has been confirmed when the deprotonated ligand S₂-Li₂ was added to [Ru(NO)Cl₃ · xMeOH] and allowed to stir for 30 h. The monomer 1 undergoes aerial oxidation to give (NBu₄)₂[Ru^IV(S₂)₃] (3). The reaction between RuCl₃ · xH₂O and S₂-H₂ in the presence of NaOMe, afforded the dinulear Ru^III species (NMe₄)₂[Ru^III(S₂)₂]₂ (4). A modified method for the preparation of 1 is being employed to synthesize the osmium analogue NBu₄[Os(NO)(S₂)₂] (5) effectively. The solid state structures of 1, 2 and 3 were determined by X-ray crystal structure analysis. A comparison of relevant bond distance data suggests that 1,2-benzenedithiolate acts as an “innocent” ligand.     

The ReH6[P(C6H5)3]2 ion as a ligand: complexes with M(CO)3 fragments (M = Cr, Mo, W)

The reactions of [(H₅C₆)₃P]₂ReH₆⁻ with (CH₃CN)₃Cr(CO)₃, (diglyme)Mo(CO)₃ or (C₃H₇CN)₃W(CO)₃ led to the formation of [(H₅C₆)₃P]₂ReH₆M(CO)₃⁻ (M = Cr, Mo, W) complexes. These have been characterized by IR and NMR spectroscopies, as well as elemental analyses. A single crystal X-ray diffraction study has also been carried out for the M = Cr complex as a K(18-crown-6)⁺ salt. The complex crystallizes as a THF monosolvate in the monoclinic space group P2₁/n with a = 22.323(6), B = 9.523(2), C = 27.502(5) Å, β = 104.98(2)⁰ and V = 5648 ų for Z = 4. The Re---Cr separation is 2.5745(12) Å, and the two phosphine ligands are oriented unsymmetrically. Although the hydride ligands were not found, the presence of three bridging hydrides and a dodecahedral coordination geometry about rhenium could be inferred. Low temperature ¹H and ³¹P NMR spectroscopic studies did not reveal the low symmetry of the solid state structure.     

Novel [Ru(polypyridine)(CO)2Cl2] and [Ru(polypyridine)2(CO)Cl]-type complexes: Characterizing the effects of introducing azopyridyl ligands by electrochemical, spectroscopic and crystallographic measurements

The reaction of ruthenium carbonyl polymer ([Ru(CO)₂Cl₂]_n) with azopyridyl compounds (2,2′-azobispyridine; apy or 2-phenylazopyridine; pap) generated new complexes, [Ru(azo)(CO)₂Cl₂] (azo = apy, pap). [Ru(apy)(CO)₂Cl₂] underwent photodecarbonylation to give a chloro-bridged dimer complex, whereas the corresponding pap complex ([Ru(pap)(CO)₂Cl₂]) was not converted to a dimer. The reactions of the chloro-bridged dimer containing the bpy ligand (bpy = 2,2′-bipyridine) with either apy or pap resulted in the formation of mixed polypyridyl complexes, [Ru(azo)(bpy)(CO)Cl]⁺. The novel complexes containing azo ligands were characterized by various spectroscopic measurements including the determination of X-ray crystallographic structures. Both [Ru(azo)(CO)₂Cl₂] complexes have two CO groups in a cis position to each other and two chlorides in a trans position. The azo groups are situated cis to the CO ligand in [Ru(azo)(bpy)(CO)Cl]⁺. All complexes have azo N-N bond lengths of 1.26-1.29 Å. The complexes exhibited azo-based two-electron reduction processes in electrochemical measurements. The effects of introducing azopyridyl ligands to the ruthenium carbonyl complexes were examined by ligand-based redox potentials, stretching frequencies and force constants of CO groups and bond parameters around Ru-CO moieties.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Five-coordinate rhenium(III)-thiolato complexes: the structure of [Re(SCH2PhOCH3)3(PPh3)2]

A novel five-coordinate rhenium(III)-thiolato complex, Re(SCH₂C₆H₄OCH₃-p)₃(PPh₃)₂ has been isolated during the reaction of trans-ReOCl₃(PPh₃)₂ with p-methoxybenzyl mercaptan. In the unexpected structure that was acquired, the central metal has undergone a reduction from Re(V) to Re(III). The five-coordinate Re(III) complex has been characterized by spectroscopic methods, elemental analysis and X-ray crystallography. X-ray crystallographic studies showed the coordination geometry around rhenium to be that of a trigonal bipyramid. The basal plane is defined by three sulfur atoms of the monodentate ligand, while the two apical positions are occupied by two phosphines of the precursor.     

New preparations and molecular structures of cis-MCl2(Ph2PCH2PPh2)2, M = Ru,Os and trans-RuCl2(Ph2PCH2PPh2)2

The title compounds were made by reacting bis(diphenylphosphino)methane (dppm) with reduced solutions of OsCl₆^4? and Ru₂OCl₁₀^4?. The crystal and molecular structures of these compounds have been determined form three-dimensional X-ray study. The cis-isomers crystallize with one CHCl₃ per molecule of the complex. All three compounds crystallize in the monoclinic space group P2₁/n with unit cell dimensions as follows: Cis-OsCl₂(dppm)₂·CHCl₃: a = 13.415(4) Å, b = 22.859(4) Å, c = 16.693(3) Å, β = 105.77(3)°, V = 4926(3) ų, Z = 4. cis-RuCl₂(dppm)₂·CHCl₃: a = 13.442(3) Å, b = 22.833(7) Å, c = 16.750(4) Å, β = 105.53(2)°, V = 4953(3) ų, Z = 4. trans-RuCl₂(dppm)₂: a = 11.368(7) Å, b = 10.656(6) Å, c = 18.832(12) Å; β = 103.90(6)°, V = 2213(7) ų; Z = 2. The structures were refined to R = 0.044 (R_w = 0.055) for cis-OsCl₂(dppm)₂·CHCl₃; R = 0.065 (R_w = 0.079) for cis-RuCl₂(dppm)₂·CHCl₃ and R = 0.028 (R_w = 0.038) for trans-RuCl₂(dppm)₂. The complexes are six coordinate with stable four-membered chelate rings. The PMP angle in the chelate rings is ca. 71° in each case.     

Structure and reactivity of [Ru(2,3-Medpp)2Cl2]

The structure and reactivity of the complex [Ru(2,3-Medpp)₂Cl₂](PF₆)₂ (2,3-Medpp⁺=2-[2-(1-methylpyridiniumyl)]-3-(2-pyridyl)pyrazine) was investigated by X-ray diffraction (XRD), ¹H NMR, redox, and UV-Vis absorption measurements. X-ray analysis shows that crystals obtained from an acetonitrile-toluene solution contain the trans-Cl₂, trans-pyrazine isomeric form, while ¹H NMR and redox measurements on the main product of the synthetic workup indicate the presence of the trans-Cl₂, cis-pyrazine isomer. In the dark at 70 °C, the complex [Ru(2,3-Medpp)₂Cl₂]²⁺ reacts slowly in acetonitrile isomerizing to the cis-[Ru(2,3-Medpp)₂(CH₃CN)Cl]³⁺ species. Under ambient light in the presence of excess AgNO₃ the cis-[Ru(2,3-Medpp)₂(CH₃CN)₂]⁴⁺ species is obtained.     

In situ high pressure FT-IR spectroscopy on alkene hydroformylation catalysed by RhH(CO)(PPh3)3 and Co2(CO)8

Catalytic hydroformylation of olefins has been carried out in a HP FT-IR cell using RhH(CO)(PPh₃)₃ catalytic precursor. A different behaviour was noticed between a terminal (hex-1-ene) and an internal alkene (cyclohexene) and different rate-determining steps of the catalytic cycle have been hypothesised. The hydroformylation of hex-1-ene has also been tested in the presence of Co₂(CO)₈ as catalyst. In this case, only the catalytic precursor is evidenced by HP FT-IR. Finally, the influence of an additional gas (helium, nitrogen or argon) in the reaction medium was evaluated: a high pressure of argon or nitrogen affects the initial rate of the reaction as shown by a decrease of the rate of the aldehyde formation.     

A rare example of a di-cationic hydrido carbonyl tetra-nuclear cluster, [H2Rh2Pt2(CO)7(PPh3)3]

Addition of excess CF₃CO₂H (HTFA) to [Rh₂Pt₂(CO)₇(PPh₃)₃], I, under nitrogen results in the formation of a salt (X²⁺ Y²⁻), which contains only the second example of a di-cationic carbonyl hydride tetra-nuclear cluster, [H₂Rh₂Pt₂(CO)₇(PPh₃)₃]²⁺, X²⁺, and a presently partially characterized polymetallic anion Y²⁻. The di-cation X²⁺ has been characterized by mass spectrometry and a variety of multinuclear NMR methods. Since there is no difference in the electron count for I and X²⁺, it is probable that both I and X²⁺ adopt similar butterfly metallic frameworks with a Rh-Rh hinge; in X²⁺, there are two bridging hydrides to the same wing-tip Pt but the phosphine site occupancies on the Rh₂Pt₂-framework in I and X²⁺ are different.     

Kinetics study of the substitution reaction of fac-[Fe(CN)2(CO)3I] with PPh3

Substitution reaction of fac-[Fe^II(CN)₂(CO)₃I]⁻ with triphenylphosphine (PPh₃) produced mono phosphine substituted complex cis-cis-[Fe^II(CN)₂(CO)₂(PPh₃)I]⁻. Crystal structure of the product showed that carbonyl positioned trans- to iodide was replaced by PPh₃. The substitution reaction was monitored by quantitative infrared spectroscopic method, and the rate law for the substitution reaction was determined to be rate = k[[Fe^II(CN)₂(CO)₂(PPh₃)I]⁻][PPh₃]. Transition state enthalpy and entropy changes were obtained from Eyring equation k = (k_BT/h)exp(−ΔH^≠/RT + ΔS^≠/R) with ΔH^≠ = 119(4) kJ mol⁻¹ and ΔS^≠ = 102(10) J mol⁻¹ K⁻¹. Positive transition state entropy change suggests that the substitution reaction went through a dissociative pathway.     

Synthesis and properties of the dichloro [tetramethyl (trifluoromethyl)cyclopentadienyl]ruthenium dimer: X-ray structure of [M2(η-C5Me4CF3)2Cl2(μ-Cl)2] (M=Ru, Rh)

The reaction of RuCl₃(H₂O), with C₅Me₄CF₃J in refluxing EtOH gives [Ru₂(η⁵-C₅Me₁CF₂)₂ (μ-Cl₂] (20 in 44% yield. Dimer 2 antiferromagnetic (−2J=200 cm¹). The crystal structures of 2 (rhombohedral system, R3 space group, Z=9, R=0.0589) and [Rh₂(η⁵-C₅Me₄CF₃(₂Cl₂(μ-Cl)₂] (3) (rhombohedral system. space group, Z = 9, R = 0.0641) were solved; both complexes have dimeric structures with a trans arrangement of the η⁵-C₅Me₄CF₄ rings. Comparison of the geometry of 2 and 3 with those of the corresponding η⁵-C₅Me₅ complexes shows that lowering the ring symmetry causes significant distortion of the M₂(μ-Cl)₂ moiety. The analysis of the MCl₃ fragment conformations in 2 and 3 and in the η⁵-C₅ME₅ analogues shows that they are correlated with the M---M distances. The Cl atoms are displaced by Br on reaction of 2 with KBr in MeOH to give the diamagnetic dimer [Ru₂(η⁵-C₅Me₄CF₃)₂Br₂ (μ-Br₂] (4). Complex 2 reacts with O₂ in CH₂Cl₂ solution at ambient temperature to form a mixture of isomeric η⁶-fulvene dimers [Ru₂(η⁶-C₅Me₃CF₃ = CH₂)₂Cl₂(μ-Cl)₂] (5). Reactions of 5 with CO and allyl chloride give Ru(η⁵-C₅Me₃CF₃CH₂Cl)(CO)₂Cl (6) and Ru(η⁵-C₅Me₃CF₃CF₃CH₂Cl)(η³-C₃H₅)Cl₂ (7) respectively.     

Synthesis and characterization of SrCu2(O2CR)3(bdmap)3 and Bi2(O2CCH3)4(bdmap)2(H2O) (R = CH3, CF3; bdmap = 1,3-bis(dimethylamino)-2-propanolato)

New mixed metal complexes SrCu₂(O₂CR)₃(bdmap)₃ (R = CF₃ (1a), CH₃ (1b)) and a new dinuclear bismuth complex Bi₂(O₂CCH₃)₄(bdmap)₂(H₂O) (2) have been synthesized. Their crystal structures have been determined by single-crystal X-ray diffraction analyses. Thermal decomposition behaviors of these complexes have been examined by TGA and X-ray powder diffraction analyses. While compound 1a decomposes to SrF₂ and CuO at about 380°C, compound 1b decomposes to the corresponding oxides above 800°C. Compound 2 decomposes cleanly to Bi₂O₃ at 330°C. The magnetism of 1a was examined by the measurement of susceptibility from 5–300 K. Theoretical fitting for the susceptibility data revealed that 1a is an antiferromagnetically coupled system with g = 2.012(7), −2J = 34.0(8) cm⁻¹. Crystal data for 1a: C₂₇H₅₁N₆O₉F₉Cu₂Sr/THF, monoclinic space group P2₁/m, A = 10.708(6), B = 15.20(1), C = 15.404(7) Å, β = 107.94(4)°, V = 2386(2) ų, Z = 2; for 1b: C₂₇H₆₀N₆O₉Cu₂Sr/THF, orthorhombic space group Pbcn, A = 19.164(9), B = 26.829(8), C = 17.240(9) Å, V = 8864(5) ų, Z = 8; for 2: C₂₂H₄₈O₁₁N₄Bi₂, monoclinic space group P2₁/c, A = 17.614(9), B = 10.741(3), C = 18.910(7) Å, β = 109.99(3)°, V = 3362(2) ų, Z = 4.     

Reinvestigation of the visible absorption bands of the 2,2′-bipyrimidine complexes W(CO)4(bpym) and (μ-bpym)[M(CO)4]2 (M=Mo, W) with resonance Raman spectroscopy; the emission spectrum of (μ-bpym)[Mo(CO)4]2

The character of the two lowest energy transitions of W(CO)₄(bpym) and (μ-bpym)[M(CO)₄]₂ (M=Mo, W) were established with resonance Raman spectroscopy. According to these spectra the two bands belong to MLCT transitions to different π* orbitals of the bpym ligand. Contrary to expectations it is not the first (lowest energy) but the second and more intense electronic transition which, according to the resonance Raman spectra, is directed to the lowest lying π* orbital (b_2u*, LUMO) of these complexes. This interpretation explains the different band intensities and the untypically low g values of the ESR signals of corresponding anion radicals. Excitation of (μ-bpym)[Mo(CO)₄]₂ in CH₂Cl₂ at 400 nm produced a weak emission with an onset at 700 nm. According to the excitation spectrum, this emission originates from the lowest MLCT-excited state of the complex.     

Sn-S and Ru-Ru bonds cleavage reactions between [Ph3SnS(CH2)3SSnPh3] and Ru3(CO)12: X-ray crystal structures of [Ph3SnS(CH2)3SSnPh3] and trans-[Ru(CO)4(SnPh3)2]

The organotin complex [Ph₃SnS(CH₂)₃SSnPh₃] (1) was synthesized by PdCl₂ catalyzed reaction between Ph₃SnCl and disodium-1,3-propanedithiolate which in turn was prepared from 1,2-propanedithiol and sodium in refluxing THF. Reaction of 1 with Ru₃(CO)₁₂ in refluxing THF affords the mononuclear complex trans-[Ru(CO)₄(SnPh₃)₂] (2) and the dinuclear complex [Ru₂(CO)₆(μ-κ²-SCH₂CH₂CH₂S)] (3) in 20 and 11% yields, respectively, formed by cleavage of Sn-S bond of the ligand and Ru-Ru bonds of the cluster. Treatment of pymSSnPPh₃ (pymS = pyrimidine-2-thiolate) with Ru₃(CO)₁₂ at 55-60 °C also gives 2 in 38% yield. Both 1 and 2 have been characterized by a combination of spectroscopic data and single crystal X-ray diffraction analysis.     

Kinetics and mechanisms of ligand substitution reactions of molybdenum SO2 complexes. Synthesis and X-ray structure of trans-Mo(CO)2 (dmpe) (PPh3) (SO2)

Kinetic results are reported for intramolecular PPh₃ substitution reactions of Mo(CO)₂(η¹-L)(PPh₃)₂(SO₂) to form Mo(CO)₂(η²-L)(PPh₃)(SO₂) (L = DMPE = (Me)₂PC₂H₄P(Me)₂ and dppe=Ph₂PC₂H₄PPh₂) in THF solvent, and for intermolecular SO₂ substitutions in Mo(CO)₃(η²-L)(η²-SO₂) (L = 2,2′-bipyridine, dppe) with phosphorus ligands in CH₂Cl₂ solvent. Activation parameters for intramolecular PPh₃ substitution reactions: ΔH^≠ values are 12.3 kcal/mol for dmpe and 16.7 kcal/mol for dppe; ΔS^≠ values are −30.3 cal/mol K for dmpe and −16.4 cal/mol K for dppe. These results are consistent with an intramolecular associative mechanism. Substitutions of SO₂ in MO(CO)₃(η²-L)(η²-SO₂) complexes proceed by both dissociative and associative mechanisms. The facile associative pathways for the reactions are discussed in terms of the ability of SO₂ to accept a pair of electrons from the metal, with its bonding transformations of η²-SO₂ to η¹-pyramidal SO₂, maintaining a stable 18-e count for the complex in its reaction transition state. The structure of Mo(CO)₂(dmpe)(PPh₃)(SO₂) was determined crystallographically: P2₁/c, A=9.311(1), B = 16.344(2), C = 18.830(2) Å, ß=91.04(1)°, V=2865.1(7) ų, Z=4, R(F)=3.49%.     

Solvent influence in the formation of normal and abnormal carbene complexes in reactions of imidazolium salts with [Ir(H)2(PPh3)2(OCMe2)2]BF4

Abnormal and normal carbene complexes are formed in reactions of 2-pyridylmethylimidazolium salts with [Ir(H)₂(PPh₃)₂(OCMe₂)₂]BF₄ at room temperature in tetrahydrofuran (THF) or dichloromethane (CH₂Cl₂). Reactions in THF lead to the formation of abnormal carbene (C-5 bound), while reactions in CH₂Cl₂ lead to formation of normal carbene (C-2 bound).     

Intermolecular Re---H·H---X hydrogen bonding (X = N, C) involving ReH5(PPh3)3

Ab initio (B3LYP) calculations show that PD·H---ReH₄(PH₃)₃ (PD = Proton donor) interactions follow the order PD = pyrrole > NH₃ > HCCH > C₂H₄ > CH₃---H 0 and decrease with the pK_a of the PD. For equivalent pK_a's, NH interacts more strongly than CH. However, intermolecular hydrogen-bonding of the M---H·H---C type is too weak to be detected experimentally in FTIR or UV-vis studies between ReH₅(PPh₃)₃ and PhCCH, C₆F₅H or PhCHCl₂.