Decreased lateral aggregation of a variant recombinant fibrinogen provides insight into the polymerization mechanism

We analyzed the polymerization of BbetaA68T fibrinogen, the recombinant counterpart of fibrinogen Naples, a variant known to have decreased thrombin binding. When polymerized with equal thrombin concentrations, BbetaA68T fibrinogen had a longer lag time and lower rate of lateral aggregation, V(max), than normal recombinant fibrinogen, but a similar final turbidity. At thrombin concentrations that equalized the rates of fibrinopeptide A release, BbetaA68T fibrinogen polymerized with a lag time and V(max) similar to normal, but reached a significantly lower final turbidity. Similar results were produced when BbetaA68T was polymerized with Ancrod, which cleaves fibrinopeptide A at the same rate from either fibrinogen, and when BbetaA68T desA monomers were polymerized. The polymerization of desAB fibrin monomers, which circumvents fibrinopeptide release, was the same for both fibrinogens. We confirmed that turbidity was indicative of fiber thickness by scanning electron microscopy of fibrin clots. Here, we present the first experimental evidence of fibrin polymerization with a normal period of protofibril formation and rate of lateral aggregation, but with a significantly decreased extent of lateral aggregation. We conclude that the decreased lateral aggregation seen in BbetaA68T fibrinogen is due to an altered step in the enzymatic phase of its polymerization process. We propose that during normal polymerization a subtle conformational change in the E domain occurs, between the release of FpA and FpB, and that this change modulates the mechanism of lateral aggregation. Without this change, the lateral aggregation of BbetaA68T fibrinogen is impaired such that variant clots have thinner fibers than normal clots.     

Assembly of fibrin. A light scattering study.

Using stopped flow light scattering, we show that assembly of fibrin following activation with non-rate-limiting amounts of thrombin or reptilase occurs in two steps, of which the first is end-to-end polymerization of fibrin monomers to protofibrils and the second is lateral association of protofibrils to fibers, in agreement with Ferry's original proposal. Polymerization is found to proceed as a bimolecular association of bifunctional monomers; the overall rate varies as the inverse first power of the concentration; end-to-end association of two monomers, of a monomer and an oligomer, and of two oligomers occurs with the same rate constant. The value of the rate constant is 8.2 C 10(5) M-1 s-1 in 0.5 M NaCl, is three times larger in 0.1 M NaCl (0.05 M Tris, pH 7.4), and is the same following activation by reptilase and by thrombin. The onset of growth of fibers from protofibrils takes 12 times longer in 0.5 than in 0.1 M salt, i.e. thick fibers ("coarse" gels) form from short protofibrils, and thin fibers ("fine" gels) form from longer protofibrils. Jumps of salt concentration at times when protofibrils, but not fibers, have formed result in immediate growth of thick fibers at low salt from long protofibrils formed at high salt. The rate of fiber growth in these experiments varies as the inverse first power of the concentration. 3the instant of gelation (formation of a network of fibers) falls in the later half of the time during which the scattering rises due to fiber growth; the rise of gel rigidity after gelation is found to continue beyond the end of this period. Jumps from low to high salt result in retention of whatever fibers have formed at low salt and a very small additional increase of the scattering due to further fiber growth at high salt. From a variety of evidence, we conclude that the properties of fibrin are determined by kinetics and not equilibria of assembly steps. Results obtained here agree with the following scheme of fibrin assembly: monomers polymerize to protofibrils; long protofibrils associate laterally to fibers; occasionally a long protofibril associates with two different fibers to form an interfiber connection; fiber growth does not reverse to yield stabler, more compact, structures and terminates in formation of a network of fibers. The typical delay of fiber growth is the time during which protofibrils form from monomers. Measurements at rate-limiting concentrations of thrombin have allowed estimation of turnover rates of fibrinopeptides that agree with kinetic parameters obtained with direct assay of fibrinopeptide. Release of fibrinopeptide B causes more rapid fiber formation. Addition of thrombin after activation by reptilase, at a time when protofibrils, but not fibers, have formed, is followed rapidly by fiber formation; this proves that thrombin readily removes fibrinopeptide B from protofibrils. On the basis of these new results and earlier work (in particular, Blomb?ck, B., Hessel, B., Hogg, D., and Therkildsen, L...     

Altered structure and function of fibrinogen after cleavage by Factor VII Activating Protease (FSAP)

Factor VII Activating Protease (FSAP) is a plasma protease affecting both coagulation and fibrinolysis. Although a role in hemostasis is still unclear, the identification of additional physiologic substrates will help to elucidate its role in this context. FSAP has been reported to cleave fibrinogen, but the functional consequences of this are not known. We have therefore undertaken this study to determine the implications of this cleavage for fibrin-clot formation and its lysis. Treatment of human fibrinogen with FSAP released an N-terminal peptide from the Bβ chain (Bβ1-53) and subsequently the fibrinopeptide B; within the Aα chain a partial truncation of the αC-region by multiple cleavages was seen. The truncated fibrinogen showed a delayed thrombin-catalyzed polymerization and formed fibrin clots of reduced turbidity, indicative of thinner fibrin fibers. Confocal laser scanning and scanning electron microscopy of these clots revealed a less coarse fibrin network with thinner fibers and a smaller pore size. A lower pore size was also seen in permeability studies. Unexpectedly, FSAP-treated fibrinogen or plasma exhibited a significantly faster tPA-driven lysis, which correlated exclusively with cleavage of fibrinogen and not with activation of plasminogen activators. Similar observations were also made in plasma after activation of endogenous zymogen FSAP, but not in plasma of carrier of the rare Marburg I single nucleotide polymorphism. In conclusion, altering fibrin clot properties by fibrinogenolysis is a novel function of FSAP in the vasculature, which facilitates clot lysis and may in vivo contribute to reduced fibrin deposition during thrombosis.     

Substitution of the human αC region with the analogous chicken domain generates a fibrinogen with severely impaired lateral aggregation: fibrin monomers assemble into protofibrils but protofibrils do not assemble into fibers

Fibrin polymerization occurs in two steps: the assembly of fibrin monomers into protofibrils and the lateral aggregation of protofibrils into fibers. Here we describe a novel fibrinogen that apparently impairs only lateral aggregation. This variant is a hybrid, where the human αC region has been replaced with the homologous chicken region. Several experiments indicate this hybrid human-chicken (HC) fibrinogen has an overall structure similar to normal. Thrombin-catalyzed fibrinopeptide release from HC fibrinogen was normal. Plasmin digests of HC fibrinogen produced fragments that were similar to normal D and E; further, as with normal fibrinogen, the knob 'A' peptide, GPRP, reversed the plasmin cleavage associated with addition of EDTA. Dynamic light scattering and turbidity studies with HC fibrinogen showed polymerization was not normal. Whereas early small increases in hydrodynamic radius and absorbance paralleled the increases seen during the assembly of normal protofibrils, HC fibrinogen showed no dramatic increase in scattering as observed with normal lateral aggregation. To determine whether HC and normal fibrinogen could form a copolymer, we examined mixtures of these. Polymerization of normal fibrinogen was markedly changed by HC fibrinogen, as expected for mixed polymers. When the mixture contained 0.45 μM normal and 0.15 μM HC fibrinogen, the initiation of lateral aggregation was delayed and the final fiber size was reduced relative to normal fibrinogen at 0.45 μM. Considered altogether, our data suggest that HC fibrin monomers can assemble into protofibrils or protofibril-like structures, but these either cannot assemble into fibers or assemble into very thin fibers.     

The extraction effect of ultrasound during plasma clot disruption

The products of the plasma clot destruction by the low-frequency ultrasound (US) were analyzed using the combination of SDS gel-electrophoresis, gel filtration chromatography and scanning electron microscopy. It was found that US (27 kHz) did not cause activation of the plasmin system or covalent bonds cleavage in the fibrin molecules. At US intensities less than 21.6 W/cm² there was extraction of blood serum proteins, which are located in the pores of the fibrin network. The increase in intensity of ultrasonic action resulted in protofibril dissociation, which was accompanied by further release into the solution of the blood serum proteins, located inside fibrin fibers. After US cavitation protein extracted from the plasma clot underwent aggregation. Interaction between free protofibrils resulted in formation of insoluble fibrin particles.     

Protofibrin clots induced by calcium and zinc

During the course of studies with fibrin protofibrils, produced by adding hirudin to thrombin-activated fibrinogen prior to the onset of gelation, turbid clots were observed to be generated merely by adding Ca(II) or Zn(II) to protofibrils. The rate of gelation (CT) and turbidity of the “protofibrin” clots increases with cation levels in a concentration-dependent manner, with Zn(II) much more potent than Ca(II). For example, 50 μM Zn(II) generated a more turbid protofibrin clot than 0.5 mM Ca(II). In combination, levels of Zn(II) and Ca(II), which individually have no effect, induce protofibril gelation. The generation of protofibrin clots by Zn(II) is decreased at increasing ionic strength. Apparently, the underlying electrostatic forces that bind the monomers in fibrin and protofibrin gels are similar. SEM micrographs show that Ca(II)- or Zn(II)-induced protofibrin clots (600–1500Å thick) are essentially indistinguishable from those formed directly from fibrinogen and thrombin with divalent cation. The protofibrin fibers induced by the cations are thicker than the fibers formed directly from fibrinogen and thrombin in the absence of divalent cation. Branching appears brought about the the divalent cation-sensitive lateral association of different protofibril strands. These findings describe simple experimental methods for separately studying the early and late stages of fibrin gelation.     

Cl- regulates the structure of the fibrin clot.

The differences between coarse and fine fibrin clots first reported by Ferry have been interpreted in terms of nonspecific ionic strength effects for nearly 50 years and have fostered the notion that fibrin polymerization is largely controlled by electrostatic forces. Here we report spectroscopic and electron microscopy studies carried out in the presence of different salts that demonstrate that this long-held interpretation needs to be modified. In fact, the differences are due entirely to the specific binding of Cl- to fibrin fibers and not to generic ionic strength or electrostatic effects. Binding of Cl- opposes the lateral aggregation of protofibrils and results in thinner fibers that are also more curved than those grown in the presence of inert anions such as F-. The effect of Cl- is pH dependent and increases at pH > 8.0, whereas fibers grown in the presence of F- remain thick over the entire pH range from 6.5 to 9.0. From the pH dependence of the Cl- effect it is suggested that the anion exerts its role by increasing the pKa of a basic group ionizing around pH 9.2. The important role of Cl- in structuring the fibrin clot also clarifies the role played by the release of fibrinopeptide B, which leads to slightly thicker fibers in the presence of Cl- but actually reduces the size of the fibers in the presence of F-. This effect becomes more evident at high, close to physiological concentrations of fibrinogen. We conclude that Cl- is a basic physiological modulator of fibrin polymerization and acts to prevent the growth of thicker, stiffer, and straighter fibers by increasing the pKa of a basic group. This discovery opens new possibilities for the design of molecules that can specifically modify the clot structure by targeting the structural domains responsible for Cl- binding to fibrin.     

Molecular mechanisms of the polymerization of fibrin and the formation of its three-dimensional network

The results of biochemical, immunochemical, and X-ray studies of the structures of fibrinogen and fibrin molecules were analyzed. The mechanisms of the successive formation of the fibrin three-dimensional network were described: the polymerization of monomeric molecules with the formation of bifilar protofibrils, the lateral association of protofibrils, and the embranchment of the forming fibrils. Data on the electron and confocal microscopy of the polymeric fibrin were considered. The role of the known polymerization centers of fibrin which participated in the formation of protofibrils and their lateral association was discussed. Data on the existence of the previously unknown polymerization centers were given. In particular, the experimental results demonstrated that one of such centers which participated in the formation of protofibrils was located in the Bβ12–46 fragment, and did not require the cleavage of fibrinopeptide B for its functioning. The results of the computer modeling of the spatial structure of the fibrin(ogen) molecule and the intermolecular interactions in the course of the fibrin polymerization were presented. The location of the αC domains in the fibrin(ogen) molecule and their role in the polymerization process were discussed. Information on the structure of the calciumbinding sites of fibrin(ogen) and the functional role of Ca²⁺ in fibrin polymerization was published. The structure of factor XIII(a) and the mechanisms of fibrin stabilization by this factor were briefly described.     

Fibrin Fiber Stiffness Is Strongly Affected by Fiber Diameter,but Not by Fibrinogen Glycation

The major structural component of a blood clot is a mesh of fibrin fibers. Our goal was to determine whether fibrinogen glycation and fibrin fiber diameter have an effect on the mechanical properties of single fibrin fibers. We used a combined atomic force microscopy/fluorescence microscopy technique to determine the mechanical properties of individual fibrin fibers formed from blood plasma. Blood samples were taken from uncontrolled diabetic patients as well as age-, gender-, and body-mass-index-matched healthy individuals. The patients then underwent treatment to control blood glucose levels before end blood samples were taken. The fibrinogen glycation of the diabetic patients was reduced from 8.8 to 5.0 mol glucose/mol fibrinogen, and the healthy individuals had a mean fibrinogen glycation of 4.0 mol glucose/mol fibrinogen. We found that fibrinogen glycation had no significant systematic effect on single-fiber modulus, extensibility, or stress relaxation times. However, we did find that the fiber modulus, Y, strongly decreases with increasing fiber diameter, D, as Y ∝ D^?1.6. Thin fibers can be 100 times stiffer than thick fibers. This is unusual because the modulus is a material constant and should not depend on the sample dimensions (diameter) for homogeneous materials. Our finding, therefore, implies that fibrin fibers do not have a homogeneous cross section of uniformly connected protofibrils, as is commonly thought. Instead, the density of protofibril connections, ρ_Pb, strongly decreases with increasing diameter, as ρ_Pb ∝ D^?1.6. Thin fibers are denser and/or have more strongly connected protofibrils than thick fibers. This implies that it is easier to dissolve clots that consist of fewer thick fibers than those that consist of many thin fibers, which is consistent with experimental and clinical observations.     

Effects of semi-dilute actin solutions on the mobility of fibrin protofibrils during clot formation

Low concentrations of actin filaments (F-actin) inhibit the rate and extent of turbidity developed during polymerization of purified fibrinogen by thrombin. Actin incorporates into the fibrin clot in a concentration-dependent manner that does not reach saturation, indicating nonspecific trapping of actin filaments in the fibrin network. Actin does not retard activation of fibrinogen by thrombin, but rather the alignment of fibrin protofibrils into bundles which constitute the coarse clot. In contrast, equivalent F-actin concentrations have little or no effect on the turbidity of plasma clots. The difference is attributed to the presence of a plasma protein, gelsolin, that severs actin filaments. Purified gelsolin greatly reduces the effect of F-actin on the turbidity of a pure fibrin clot and decreases the fraction of actin incorporated by the clot. A calculation of the extent to which the gelsolin concentrations used in these experiments reduce the fraction of actin filaments which are long enough to impede each other's rotational diffusion indicates that it is the overlapping actin filaments which retard the association of fibrin protofibrils. The findings suggest that one role for the F-actin depolymerizing and particularly actin severing activities in blood is to prevent actin filaments released by tissue injury from interfering with the formation of coarse fibrin clots.     

Recombinant fibrinogen studies reveal that thrombin specificity dictates order of fibrinopeptide release

During cleavage of fibrinogen by thrombin, fibrinopeptide A (FpA) release precedes fibrinopeptide B (FpB) release. To examine the basis for this ordered release, we synthesized A'beta fibrinogen, replacing FpB with a fibrinopeptide A-like peptide, FpA' (G14V). Analyses of fibrinopeptide release from A'beta fibrinogen showed that FpA release and FpA' release were similar; the release of either peptide followed simple first-order kinetics. Specificity constants for FpA and FpA' were similar, demonstrating that these peptides are equally competitive substrates for thrombin. In the presence of Gly-Pro-Arg-Pro, an inhibitor of fibrin polymerization, the rate of FpB release from normal fibrinogen was reduced 3-fold, consistent with previous data; in contrast, the rate of FpA' release from A'beta fibrinogen was unaffected. Thus, with A'beta fibrinogen, fibrinopeptide release from the beta chain is similar to fibrinopeptide release from the alpha chain. We conclude that the ordered release of fibrinopeptides is dictated by the specificity of thrombin for its substrates. We analyzed polymerization, following changes in turbidity, and found that polymerization of A'beta fibrinogen was similar to that of normal fibrinogen. We analyzed clot structure by scanning electron microscopy and found that clots from A'beta fibrinogen were similar to clots from normal fibrinogen. We conclude that premature release of the fibrinopeptide from the N terminus of the beta chain does not affect polymerization of fibrinogen.     

Fibrin assembly. Lateral aggregation and the role of the two pairs of fibrinopeptides.

The structural basis of the wide variability of the physical properties of fibrin clots and the process of assembly of the clot were investigated by electron microscopy of fibers formed under various ionic conditions. In addition, highly specific proteolytic enzymes from different snake venoms were used to remove selectively only the A (batroxobin) or the B (venzyme) fibrinopeptides from fibrinogen, in contrast to thrombin, which removes both pairs. Fibers produced by cleavage of only the B fibrinopeptides displayed a characteristic band pattern indistinguishable from that of fibers formed upon removal of either the A fibrinopeptides alone or of both pairs. Computer modeling studies suggest that there is a unique molecular packing that gives rise to this fibrin band pattern. These findings imply that the release of either fibrinopeptide triggers similar modes of aggregation; the intermolecular binding sites can be localized to particular molecular domains. The diameters of fibers formed with each condition of enzyme, pH, salt concentration, and temperature were measured from electron micrographs. All fibers, except for those produced at both high ionic strength and pH, had about the same average diameter of 85 +/- 13 nm. The degree of lateral aggregation of the fibers themselves varied greatly, however; fibers aggregated more readily with cleavage of both pairs of fibrinopeptides and at lower pH and salt concentrations. The formation of such thick fiber bundles increases the stability of the clot and its resistance to proteolytic dissolution.     

Recombinant fibrinogen Vlissingen/Frankfurt IV. The deletion of residues 319 and 320 from the gamma chain of firbinogen alters calcium binding, fibrin polymerization, cross-linking, and platelet aggregation

We synthesized a variant, recombinant fibrinogen modeled after the heterozygous dysfibrinogen Vlissingen/Frankfurt IV, a deletion of two residues, gammaAsn-319 and gammaAsp-320, located within the high affinity calcium-binding pocket. Turbidity studies showed no evidence of fibrin polymerization, although size exclusion chromatography, transmission electron microscopy, and dynamic light scattering studies showed small aggregates. These aggregates did not resemble normal protofibrils nor did they clot. Fibrinopeptide A release was normal, whereas fibrinopeptide B release was delayed approximately 3-fold. Plasmin cleavage of this fibrinogen was not changed by the presence of calcium or Gly-Pro-Arg-Pro, indicating that both the calcium-binding site and the "a" polymerization site were non-functional. We conclude that the loss of normal polymerization was due to the lack of "A-a" interactions. Moreover, functions associated with the C-terminal end of the gamma chain, such as platelet aggregation and factor XIII cross-linking, were also disrupted, suggesting that this deletion of two residues affected the overall structure of the C-terminal domain of the gamma chain.     

Polydispersion in the diameter of fibers in fibrin networks: Consequences on the measurement of mass–length ratio by permeability and turbidity

The diameters of the fibrin fibers in a clot are not uniform. Morphometric analysis of transmission electron micrographs show a bimodal distribution. The effect of polydispersity of fiber diameter on mass–length ratio calculated from the turbidity and permeability of a clot has been investigated with the aid of a two network model, the networks being called Major and Minor. The fibers in the Major network are many times thicker than those in the Minor network. In a model in which Major network fibers are 10 times thicker than fibers of the Minor network, the fibers in the Minor network make a negligible contribution to the turbidity of the clot. However, they may have a marked effect on its permeability. Experiments with clots made from human fibrinogen show that the Minor network is stabilized by α-polymer and γ-γ linkages and that without such linkages it is washed away during permeation. It remains relatively intact in crosslinked clots. In agreement with the theoretical model, when mass–length ratios calculated from the turbidity are compared with those calculated from the permeability, the latter were reduced in crosslinked clots with an intact Minor network.     

A Constitutive Model for a Maturing Fibrin Network

Blood clot formation is crucial to maintain normal physiological conditions but at the same time involved in many diseases. The mechanical properties of the blood clot are important for its functioning but complicated due to the many processes involved. The main structural component of the blood clot is fibrin, a fibrous network that forms within the blood clot, thereby increasing its mechanical rigidity. A constitutive model for the maturing fibrin network is developed that captures the evolving mechanical properties. The model describes the fibrin network as a network of fibers that become thicker in time. Model parameters are related to the structural properties of the network, being the fiber length, bending stiffness, and mass-length ratio. Results are compared with rheometry experiments in which the network maturation is followed in time for various loading frequencies and fibrinogen concentrations. Three parameters are used to capture the mechanical behavior including the mass-length ratio. This parameter agrees with values determined using turbidimetry experiments and is subsequently used to derive the number of protofibrils and fiber radius. The strength of the model is that it describes the mechanical properties of the maturing fibrin network based on it structural quantities. At the same time the model is relatively simple, which makes it suitable for advanced numerical simulations of blood clot formation during flow in blood vessels.     

A Constitutive Model for a Maturing Fibrin Network

Blood clot formation is crucial to maintain normal physiological conditions but at the same time involved in many diseases. The mechanical properties of the blood clot are important for its functioning but complicated due to the many processes involved. The main structural component of the blood clot is fibrin, a fibrous network that forms within the blood clot, thereby increasing its mechanical rigidity. A constitutive model for the maturing fibrin network is developed that captures the evolving mechanical properties. The model describes the fibrin network as a network of fibers that become thicker in time. Model parameters are related to the structural properties of the network, being the fiber length, bending stiffness, and mass-length ratio. Results are compared with rheometry experiments in which the network maturation is followed in time for various loading frequencies and fibrinogen concentrations. Three parameters are used to capture the mechanical behavior including the mass-length ratio. This parameter agrees with values determined using turbidimetry experiments and is subsequently used to derive the number of protofibrils and fiber radius. The strength of the model is that it describes the mechanical properties of the maturing fibrin network based on it structural quantities. At the same time the model is relatively simple, which makes it suitable for advanced numerical simulations of blood clot formation during flow in blood vessels.     

Localization of the domains of fibrin involved in binding to platelets

The molecular basis of platelet-fibrin interactions has been investigated by using synthetic peptides as potential inhibitors of fibrin protofibril and fibrinogen binding to ADP-stimulated platelets, adhesion of fibrin fibers to the platelet surface, and platelet-mediated clot retraction. Synthetic peptides of sequence RGDS and HHLGGAKQAGDV, corresponding to regions of the fibrinogen alpha- and gamma-chains previously identified as platelet recognition sites, inhibited the binding of radiolabelled soluble fibrin oligomers to ADP-stimulated platelets with IC50 values of 10 and 40 microM, respectively. Synthetic GPRP and GHRP, corresponding to the N-terminal tripeptide sequence of the fibrin alpha-chains and the tetrapeptide sequence of the beta-chains, respectively, were minimally effective in blocking soluble fibrin polymer binding to ADP-stimulated platelets. Platelet functions which are unique to the three-dimensional fibrin network were examined by measurements of the extent of adhesion of fluorophore-labelled fibrin to platelets with a microfluorimetric technique and by light scattering measurements of the time course of clot retraction. Inhibition of fibrin-platelet adhesion by RGDS, HHLGGAKQAGDV and GHRP exhibited a similar, linear dependence reaching 1/2 maximum at about 200 microM, suggesting nonspecific effects. GPRP inhibited fibrin assembly but did not appear to have specific effects on fibrin-platelet adhesion. Only RGDS effected clot retraction, causing a 4-6-fold decrease in rate at 230 microM. These results indicate that fibrinogen and fibrin protofibrils, which are obligatory intermediates on the fibrin assembly pathway, share a set of common platelet recognition sites located at specific regions of the alpha- and gamma-chains of the multinodular fibrin(ogen) molecules. The RGDS site is also involved in mediating interactions between the three-dimensional fibrin network and stimulated platelets.     

Subfilamentous protofibril structures in fibrous proteins: cross-linking evidence for protofibrils in intermediate filaments

The packing of the constituent molecules in some fibrous proteins such as collagen and intermediate filaments (IF) is thought to consist of several hierarchical levels, the penultimate of which is the organization of subfilamentous units termed protofibrils. However, to date only indirect evidence, such as electron microscopic images of unraveling fibers or the existence of mass quanta, has been adduced in support of the existence of protofibrils. We have reexamined this issue in IF. Cross-links have been induced in trichocyte keratin, cytokeratin, and vimentin IF proteins. Using improved experimental conditions, several additional and reproducible cross-links have been characterized. Notably, many of these link between columns of molecular strands four apart on two-dimensional surface lattices. These data provide robust support for the concept of an 8-chain (4-molecule) protofibril entity in IF. Further, their positions correspond to the axial displacements predicted for protofibrils in the different types of IF. Also, the data are consistent with intact IF containing four protofibrils. In addition, the positions of these novel cross-links suggest that there are multiple possible groupings of four molecular strands to form a protofibril, suggesting a promiscuous association of molecules to form a protofibril. This may underlie the reason that organized elongated protofibrils cannot be visualized by conventional microscopic methods.     

Effects of thrombospondin on fibrin polymerization and structure

Thrombospondin (TSP) is a trace protein in plasma but is released in high concentrations from alpha-granules of activated platelets during hemostasis. It binds to the platelet membrane and becomes incorporated into fibrin clots. A variety of approaches were taken to learn the effects of TSP on fibrin polymerization and structure. 125I-TSP and 125I-fibrinogen were used to study the effect of TSP concentration on the extent of TSP and fibrin incorporation. Turbidity at 600 nm was used to monitor the time course of polymerization. Wavelength dependence of the turbidity was used to calculate the mass to length ratio, fiber diameter, and fiber density of fibrin formed in the presence and absence of TSP. Morphologies of control and TSP-containing clots were examined by electron microscopy following critical point drying. The initial TSP concentration influenced the amount of TSP incorporated but did not alter the extent of fibrin polymerization. TSP, in a concentration-dependent manner, reduced the lag time to turbidity rise and caused formation of more numerous but thinner fibers. Except for their diameter, these fibers were identical to fibers of control fibrin in terms of density and morphology. It is proposed that TSP interacts with fibrin intermediates to accelerate fiber growth, perhaps by serving as a trifunctional branching unit during network formation. The properties of fibrin around aggregating platelets, therefore, may be influenced considerably by secreted TSP.     

Chromatography and electron microscopy of cross-linked fibrin polymers--a new model describing the cross-linking at the DD-trans contact of the fibrin molecules

Polymerization of fibrin molecules results in the formation of a double-stranded protofibril. Although convincing data have not been presented, it is classically believed that γ-chain cross-linking of fibrin molecules occurs between the longitudinal end-to-end contacts (DD-long contacts) of the molecules within each of the two strands of a protofibril (intrastrand cross-linking). In this investigation the question addressed was whether γ-chain cross-linking takes place across the two strands (interstrand cross-linking) between the transversal half-staggered contacts of the molecules. Demonstration of double-stranded protofibrils in the presence of urea would indicate an interstrand cross-linking, whereas in the case of intrastrand cross-linking, the chaotropic agent urea would dissociate the double-stranded structure to form single-stranded fibrils. Protofibrils were obtained by generating soluble cross-linked fibrin polymers (sXLFbP): After incubation of souble fibrin polymers with Factor XIIIa at 37°C, the polymerization and cross-linking reaction was stopped by the addition of 6M urea and EDTA. Gel filtration of the reaction mixture in the presence of 3M urea was effect in separating sXLFbP from monomeric molecules. The sXLFbP-containing fractions were adsorbed onto mica in the presence of different concentrations of urea and investigated by electron microscopy after rotary shadowing. In the presence of 3M urea the sXLFbP appeared as double-stranded protofibrils. In the presence of 4M urea some parts of the double-stranded structure were found to be unfolded whereas in the presence of 6M urea multiple-bended single-stranded fibrils were observed. SDS-polyacrylamide gel electrophoresis of the sXLFbP demonstrated no γ-chain cross-linking within the protofibrils. Ultracentrifugation of the sXLFbP showed that in the presence of 3M urea noncross-linked fibrin polymers dissociated to monomeric molecules. When sXLFbP was centrifuged into 6M urea on sucrose density gradients, no reduction of the polymer size could be observed. The data indicate that γ-chain cross-linking occurs between the transversal contacts of the fibrin molecules within a protofibril, thus generating interstrand cross-linking. A model of the cross-linking of polymerized fibrin molecules is developed and the term DD-trans contact is proposed for this specific alignment of the D-domains.