Lipids in xylem sap of woody plants across the angiosperm phylogeny

Lipids have been observed attached to lumen-facing surfaces of mature xylem conduits of several plant species, but there has been little research on their functions or effects on water transport, and only one lipidomic study of the xylem apoplast. Therefore, we conducted lipidomic analyses of xylem sap from woody stems of seven plants representing six major angiosperm clades, including basal magnoliids, monocots and eudicots, to characterize and quantify phospholipids, galactolipids and sulfolipids in sap using mass spectrometry. Locations of lipids in vessels of Laurus nobilis were imaged using transmission electron microscopy and confocal microscopy. Xylem sap contained the galactolipids di- and monogalactosyldiacylglycerol, as well as all common plant phospholipids, but only traces of sulfolipids, with total lipid concentrations in extracted sap ranging from 0.18 to 0.63 nmol ml⁻¹ across all seven species. Contamination of extracted sap from lipids in cut living cells was found to be negligible. Lipid composition of sap was compared with wood in two species and was largely similar, suggesting that sap lipids, including galactolipids, originate from cell content of living vessels. Seasonal changes in lipid composition of sap were observed for one species. Lipid layers coated all lumen-facing vessel surfaces of L. nobilis, and lipids were highly concentrated in inter-vessel pits. The findings suggest that apoplastic, amphiphilic xylem lipids are a universal feature of angiosperms. The findings require a reinterpretation of the cohesion-tension theory of water transport to account for the effects of apoplastic lipids on dynamic surface tension and hydraulic conductance in xylem.     

Some properties of the walls of metaxylem vessels of maize roots,including tests of the wettability of their lumenal wall surfaces

Background and Aims

Since the proposal of the cohesion theory there has been a paradox that the lumenal surface of vessels is rich in hydrophobic lignin, while tension in the rising sap requires adhesion to a hydrophilic surface. This study sought to characterize the strength of that adhesion in maize (Zea mays), the wettability of the vessel surface, and to reconcile this with its histochemical and physical nature.

Methods

Wettability was assessed by emptying the maize root vessels of sap, perfusing them with either water or oil, and examining the adhesion (as revealed by contact angles) of the two liquids to vessel walls by cryo-scanning electron microscopy. The phobicity of the lumenal surface was also assessed histochemically with hydrophilic and hydrophobic probes.

Key Results

Pit borders in the lumen-facing vessel wall surface were wetted by both sap/water and oil. The attraction for oil was weaker: water could replace oil but not vice versa. Pit apertures repelled oil and were strongly stained by hydrophilic probes. Pit chambers were probably hydrophilic. Oil never entered the pits. When vessels were emptied and cryo-fixed immediately, pit chambers facing away from the vessels were always sap-filled. Pit chambers facing vessel lumens were either sap- or gas-filled. Sap from adjoining tracheary elements entering empty vessels accumulated on the lumenal surface in hemispherical drops, which spread out with decreasing contact angles to fill the lumen.

Conclusions

The vessel lumenal surface has a dual nature, namely a mosaic of hydrophilic and hydrophobic patches at the micrometre scale, with hydrophilic predominating. A key role is shown, for the first time, of overarching borders of pits in determining the dual nature of the surface. In gas-filled (embolized) vessels they are hydrophobic. When wetted by sap (vessels refilling or full) they are hydrophilic. A hypothesis is proposed to explain the switch between the two states.     

Ion-mediated increase in the hydraulic conductivity of Laurel stems: role of pits and consequences for the impact of cavitation on water transport

Changes in hydraulic conductivity (K(h)) were measured in stems of Laurus nobilis L. during perfusion with KCl, NaCl or sucrose solutions. Ionic solutes induced marked increase of K(h) with respect to deionized water but sucrose had no effect. The kinetics of KCl-induced K(h) increase was measured together with changes in [K(+)] of the perfused solution. K(h) increases were paralleled by increases in the [K(+)](out)/[K(+)](in) ratio. Samples of different lengths or with increasing percentage loss of conductivity (PLC) due to xylem cavitation were tested, with the aim of increasing radial flow through intervessel pits. KCl solutions enhanced the K(h) of 12-cm-long samples with a concentration-dependent effect up to 100 mm KCl. DeltaK(h) increased from 3 to 30% in 1.5- and 12-cm-long samples, respectively and remained constant for longer samples. Increasing PLC induced an exponential increase in DeltaK(h). PLC measured with KCl solutions was significantly less than that measured with deionized water, suggesting that measurements of PLC can be affected by the composition of the perfused solution. Experiments support the hypothesis that the 'ionic effect' is mediated by physico-chemical changes of pectins of the pit membranes and raise the possibility that plants might alter the ionic composition of the xylem sap to alleviate the hydraulic impact of cavitation.     

Anatomical features associated with water transport in imperforate tracheary elements of vessel-bearing angiosperms

Background and Aims

Imperforate tracheary elements (ITEs) in wood of vessel-bearing angiosperms may or may not transport water. Despite the significance of hydraulic transport for defining ITE types, the combination of cell structure with water transport visualization in planta has received little attention. This study provides a quantitative analysis of structural features associated with the conductive vs. non-conductive nature of ITEs.

Methods

Visualization of water transport was studied in 15 angiosperm species by dye injection and cryo-scanning electron microscopy. Structural features of ITEs were examined using light and electron microscopy.

Key Results

ITEs connected to each other by pit pairs with complete pit membranes contributed to water transport, while cells showing pit membranes with perforations up to 2 µm were hydraulically not functional. A close relationship was found between pit diameter and pit density, with both characters significantly higher in conductive than in non-conductive cells. In species with both conductive and non-conductive ITEs, a larger diameter was characteristic of the conductive cells. Water transport showed no apparent relationship with the length of ITEs and vessel grouping.

Conclusions

The structure and density of pits between ITEs represent the main anatomical characters determining water transport. The pit membrane structure of ITEs provides a reliable, but practically challenging, criterion to determine their conductive status. It is suggested that the term tracheids should strictly be used for conductive ITEs, while fibre-tracheids and libriform fibres are non-conductive.     

Contrasting hydraulic architecture and function in deep and shallow roots of tree species from a semi-arid habitat

Background and Aims

Despite the importance of vessels in angiosperm roots for plant water transport, there is little research on the microanatomy of woody plant roots. Vessels in roots can be interconnected networks or nearly solitary, with few vessel–vessel connections. Species with few connections are common in arid habitats, presumably to isolate embolisms. In this study, measurements were made of root vessel pit sizes, vessel air-seeding pressures, pit membrane thicknesses and the degree of vessel interconnectedness in deep (approx. 20 m) and shallow (<10 cm) roots of two co-occurring species, Sideroxylon lanuginosum and Quercus fusiformis.

Methods

Scanning electron microscopy was used to image pit dimensions and to measure the distance between connected vessels. The number of connected vessels in larger samples was determined by using high-resolution computed tomography and three-dimensional (3-D) image analysis. Individual vessel air-seeding pressures were measured using a microcapillary method. The thickness of pit membranes was measured using transmission electron microscopy.

Key Results

Vessel pit size varied across both species and rooting depths. Deep Q. fusiformis roots had the largest pits overall (>500 µm) and more large pits than either shallow Q. fusiformis roots or S. lanuginosum roots. Vessel air-seeding pressures were approximately four times greater in Q. fusiformis than in S. lanuginosum and 1·3–1·9 times greater in shallow roots than in deep roots. Sideroxylon lanuginosum had 34–44 % of its vessels interconnected, whereas Q. fusiformis only had 1–6 % of its vessels connected. Vessel air-seeding pressures were unrelated to pit membrane thickness but showed a positive relationship with vessel interconnectedness.

Conclusions

These data support the hypothesis that species with more vessel–vessel integration are often less resistant to embolism than species with isolated vessels. This study also highlights the usefulness of tomography for vessel network analysis and the important role of 3-D xylem organization in plant hydraulic function.     

Inter-vessel pitting and cavitation in woody Rosaceae and other vesselled plants: a basis for a safety versus efficiency trade-off in xylem transport

The hypothesis that greater safety from cavitation by air-seeding through inter-vessel pits comes at the cost of less porous pit membranes with greater flow resistance was tested . Sixteen vessel-bearing species were compared: 11 from the Rosaceae, four from other angiosperm families, and one fern. Unexpectedly, there was no relationship between pit resistance (and hence the prevailing membrane porosity) and cavitation pressure. There was, however, an inverse relationship between pit area per vessel and vulnerability to cavitation (r² = 0.75). This suggests that cavitation is caused by the rare largest membrane pore per vessel, the average size of which increases with total pit area per vessel. If safety from cavitation constrains pit membrane surface area, it also limits vessel surface area and the minimum vessel resistivity. This trade-off was consistent with an approximately three-fold increase in vessel resistivity with cavitation pressure dropping from −0.8 to −6.6 MPa. The trade-off was compensated for by a reduction in the percentage of vessel wall pitted: from 10–16% in vulnerable species to 2–4% in resistant species. Across species, end-wall pitting accounted for 53 ± 3% of the total xylem resistivity. This corresponded to vessels achieving on average 94 ± 2% of their maximum possible conductivity if vessel surface area is constrained.     

Analysis of circular bordered pit function I. Angiosperm vessels with homogenous pit membranes

A model predicted pit and vessel conductivity, the air-seed pressure for cavitation, and the implosion pressure causing vessel collapse. Predictions were based on measurements from 27 angiosperm species with circular bordered pits and air-seed pressures of 0.2-11.3 MPa. Vessel implosion pressure exceeded air-seed pressure by a safety factor of 1.8 achieved by the increase in vessel wall thickness per vessel diameter with air-seed pressure. Intervessel pitting reduced the implosion pressure by 20 to 40%. Pit hydraulic conductivity decreased by 30-fold from low (<1 MPa) to high (>10 MPa) air-seed pressure primarily because of decreasing pit membrane conductivity. Vessel conductivity (per length and wall area) increased with vessel length as higher lumen conductivity overcame low pit conductivity. At the "saturating vessel length," vessel conductivity maximized at the Hagen-Poiseuille value for the lumen per wall area. Saturated vessel conductivity declined by sixfold with increasing air-seed pressure because of increased wall thickness associated with increased implosion resistance. The saturated vessel length is likely the optimal length because: (a) shorter vessels have lower conductivities, (b) longer vessels do not increase conductivity when functional yet decrease it more when cavitated, (c) observed pit structure most closely optimized vessel conductivity at the saturated length, and (d) saturated lengths were similar to measured lengths.     

Xylem of early angiosperms: Nuphar (Nymphaeaceae) has novel tracheid microstructure1

SEM studies of xylem of stems of Nuphar reveal a novel feature, not previously reported for any angiosperm. Pit membranes of tracheid end walls are composed of coarse fibrils, densest on the distal (outside surface, facing the pit of an adjacent cell) surface of the pit membrane of a tracheid, thinner, and disposed at various levels on the lumen side of a pit membrane. The fibrils tend to be randomly oriented on the distal face of the pit membrane; the innermost fibrils facing the lumen take the form of longitudinally oriented strands. Where most abundantly present, the fibrils tend to be disposed in a spongiform, three-dimensional pattern. Pores that interconnect tracheids are present within the fibrillar meshwork. Pit membranes on lateral walls of stem tracheids bear variously diminished versions of this pattern. Pits of root tracheids are unlike those of stems in that the lumen side of pit membranes bears a reticulum revealed on the outer surface of the tracheid after most of the thickness of a pit membrane is shaved away by the sectioning process. No fibrillar texturing is visible on the root tracheid pits when they are viewed from the inside of a tracheid. Tracheid end walls of roots do contain pores of various sizes in pit membranes. These root and stem patterns were seen in six species representing the two sections of Nuphar, plus one intersectional hybrid, as well as in one collection of Nymphaea, included for purposes of comparison. Differences between root and stem tracheids with respect to microstructure are consistent in all species studied. Microstructural patterns reported here for stem tracheid pits of Nymphaeaceae are not like those of Chloranthaceae, Illiciaceae, or other basal angiosperms. They are not referable to any of the patterns reported for early vascular plants. The adaptational nature of the pit membrane structure in these tracheids is not apparent; microstructure of pit membranes in basal angiosperms is more diverse than thought prior to study with SEM.     

Polar auxin transport is implicated in vessel differentiation and spatial patterning during secondary growth in Populus

Premise of the Study

Dimensions and spatial distribution of vessels are critically important features of woody stems, allowing for adaptation to different environments through their effects on hydraulic efficiency and vulnerability to embolism. Although our understanding of vessel development is poor, basipetal transport of auxin through the cambial zone may play an important role.

Methods

Stems of Populus tremula ×alba were treated with the auxin transport inhibitor N‐1‐naphthylphthalamic acid (NPA) in a longitudinal strip along the length of the lower stem. Vessel lumen diameter, circularity, and length; xylem growth; tension wood area; and hydraulic conductivity before and after a high pressure flush were determined on both NPA‐treated and control plants.

Key Results

NPA‐treated stems formed aberrant vessels that were short, small in diameter, highly clustered, and angular in cross section, whereas xylem formed on the untreated side of the stem contained typical vessels that were similar to those of controls. NPA‐treated stems had reduced specific conductivity relative to controls, but this difference was eliminated by the high‐pressure flush. The control treatment (lanolin + dimethyl sulfoxide) reduced xylem growth and increased tension wood formation, but never produced the aberrant vessel patterning seen in NPA‐treated stems.

Conclusions

These results are consistent with a model of vessel development in which basipetal polar auxin transport through the xylem‐side cambial derivatives is required for proper expansion and patterning of vessels and demonstrate that reduced auxin transport can produce stems with altered stem hydraulic properties.     

Single‐vessel flow measurements indicate scalariform perforation plates confer higher flow resistance than previously estimated

During vessel evolution in angiosperms, scalariform perforation plates with many slit‐like openings transformed into simple plates with a single circular opening. The transition is hypothesized to have resulted from selection for decreased hydraulic resistance. Previously, additional resistivity of scalariform plates was estimated to be small – generally 10% or less above lumen resistivity – based on numerical and physical models. Here, using the single‐vessel technique, we directly measured the hydraulic resistance of individual xylem vessels. The resistivity of simple‐plated lumens was not significantly different from the Hagen–Poiseuille (HP) prediction (+6 ± 3.3% mean deviation). In the 13 scalariform‐plated species measured, plate resistivity averaged 99 ± 13.7% higher than HP lumen resistivity. Scalariform species also showed higher resistivity than simple species at the whole vessel (+340%) and sapwood (+580%) levels. The strongest predictor of scalariform plate resistance was vessel diameter (r² = 0.84), followed by plate angle (r² = 0.60). An equation based on laminar flow through periodic slits predicted single‐vessel measurements reasonably well (r² = 0.79) and indicated that Baileyan trends in scalariform plate evolution maintain an approximate balance between lumen and plate resistances. In summary, we found scalariform plates of diverse morphology essentially double lumen flow resistance, impeding xylem flow much more than previously estimated.     

Bordered pits in xylem of vesselless angiosperms and their possible misinterpretation as perforation plates

Vesselless wood represents a rare phenomenon within the angiosperms, characterizing Amborellaceae, Trochodendraceae and Winteraceae. Anatomical observations of bordered pits and their pit membranes based on light, scanning and transmission electron microscopy (SEM and TEM) are required to understand functional questions surrounding vesselless angiosperms and the potential occurrence of cryptic vessels. Interconduit pit membranes in 11 vesselless species showed a similar ultrastructure as mesophytic vessel‐bearing angiosperms, with a mean thickness of 245 nm (± 53, SD; n = six species). Shrunken, damaged and aspirated pit membranes, which were 52% thinner than pit membranes in fresh samples (n = four species), occurred in all dried‐and‐rehydrated samples, and in fresh latewood of Tetracentron sinense and Trochodendron aralioides. SEM demonstrated that shrunken pit membranes showed artificially enlarged, > 100 nm wide pores. Moreover, perfusion experiments with stem segments of Drimys winteri showed that 20 and 50 nm colloidal gold particles only passed through 2 cm long dried‐and‐rehydrated segments, but not through similar sized fresh ones. These results indicate that pit membrane shrinkage is irreversible and associated with a considerable increase in pore size. Moreover, our findings suggest that pit membrane damage, which may occur in planta, could explain earlier records of vessels in vesselless angiosperms.     

Wood properties of two silver birch clones exposed to elevated CO2 and O3

Effects of elevated carbon dioxide (CO₂) and ozone (O₃) on wood properties of two initially 7‐year‐old silver birch (Betula pendula Roth) clones were studied after a fumigation during three growing seasons. Forty trees, representing two fast‐growing clones (4 and 80), were exposed in open‐top chambers to the following treatments: outside control, chamber control, 2 × ambient [CO₂], 2 × ambient [O₃] and 2 × ambient [CO₂]+2 × ambient [O₃]. After the 3‐year exposure, the trees were felled and wood properties were analyzed. The treatments affected both stem wood structure and chemistry. Elevated [CO₂] increased annual ring width, and concentrations of extractives and starch, and decreased concentrations of cellulose and gravimetric lignin. Elevated O₃ decreased vessel percentage and increased cell wall percentage in clone 80. In vessel percentage, elevated CO₂ ameliorated the O₃‐induced decrease. In clone 4, elevated O₃ decreased nitrogen concentration of wood. The two clones had different wood properties. In clone 4, the concentrations of extractives, starch, soluble sugars and nitrogen were greater than in clone 80, while in clone 80 the concentrations of cellulose and acid‐soluble lignin were higher. Clone 4 also had slightly longer fibres, greater vessel lumen diameter and vessel percentage than clone 80, while in clone 80 cell wall percentage was greater. Our results show that wood properties of young silver birch trees were altered under elevated CO₂ in both clones, whereas the effects of O₃ depended on clone.     

Vestured pits and vestured vessel member walls in some Indian dicotyledonous woods

NAIR, M. N. B. AND MOHAN RAM, H. Y., 1989. Vestured pits and vestured vessel member walls in some Indian dicotyledonous woods. The woods of 144 taxa belonging to 38 families of angiosperms were examined for vestured pits and vestured vessel member walls using scanning electron microscopy. Vestured pits are present in 66 taxa (belonging to ten families) and vestured vessel member walls occur in only six taxa (belonging to three families). In Ehretiaceae and Euphorbiaceae vestures are present only in certain vessel members. In Wrighlia tinctoria , perforation plates containing vestures have been observed in addition to the presence of vestured pits. A classification of vestured pits based on their morphology and distribution is proposed by us. In all the types of vestured pits, vestures are present on the margin of the outer pit aperture or on the pit chamber wall. Occasionally, they are present in the pit canal, on the margin and in the vicinity of the inner pit aperture and rarely over the inner walls of the vessel members. The functions of vestured pits are not clear, although several suggestions are made. Whether or not these structures affect wood processing is not presently understood. It appears that vestured pits and vestured vessel member walls have diagnostic rather than phylogenetic value.     

Vascular Occlusions in the Stem of Ailanthus excelsa Roxb.

The stem of Ailanthus excelsa Roxb. (Simaroubaceae) may developvascular occlusions and gum-resin cavities in the xylem as aresponse to injury and infection. Fungal hyphae are observedin the vessel lumen and in the adjacent parenchyma cells. Theocclusions appeared in various forms and showed varying chemicalcomposition. The chemical nature of the occluding material differedfrom that of the exudate formed in the cavities. The majorityof occlusions contained lipids, protein, polysaccharides, phenolics,lignin and probably pectin, whereas, the exudate contained lipids,protein and four soluble sugars. All the components of the occlusionexcept lignin and pectin appear to have been formed in the parenchymacells adjacent to the vessel and migrated to vessel lumen throughthe vessel wall pits. The different constituents migrate intothe vessel lumen independently where they mix to form occlusions. Ailanthus excelsa Roxb., vascular occlusions, lignin, fluorescence, exudation     

Structure and function of bordered pits: new discoveries and impacts on whole-plant hydraulic function

Bordered pits are cavities in the lignified cell walls of xylem conduits (vessels and tracheids) that are essential components in the water-transport system of higher plants. The pit membrane, which lies in the center of each pit, allows water to pass between xylem conduits but limits the spread of embolism and vascular pathogens in the xylem. Averaged across a wide range of species, pits account for > 50% of total xylem hydraulic resistance, indicating that they are an important factor in the overall hydraulic efficiency of plants. The structure of pits varies dramatically across species, with large differences evident in the porosity and thickness of pit membranes. Because greater porosity reduces hydraulic resistance but increases vulnerability to embolism, differences in pit structure are expected to correlate with trade-offs between efficiency and safety of water transport. However, trade-offs in hydraulic function are influenced both by pit-level differences in structure (e.g. average porosity of pit membranes) and by tissue-level changes in conduit allometry (average length, diameter) and the total surface area of pit membranes that connects vessels. In this review we address the impact of variation in pit structure on water transport in plants from the level of individual pits to the whole plant.     

PRESENCE OF VESSELS IN WOOD OF SARCANDRA (CHLORANTHACEAE); COMMENTS ON VESSEL ORIGINS IN ANGIOSPERMS

Sarcandra is the only genus of Chloranthaceae hitherto thought to be vesselless. Study of liquid-preserved material of S. glabra revealed that in root secondary xylem some tracheary elements are wider in diameter and have markedly scalariform end walls combined with circular pits on lateral walls. Examination of these wider tracheary elements with scanning electron microscope (SEM) demonstrated various degrees of pit membrane absence in the end walls. Commonly a few threadlike fibrils traverse the pits (perforations); these as well as intact nature of pit membranes in pits at ends of some perforation plates are evidence that lack of pit membranes does not result from damage during processing. Some perforations lack any remnants of pit membranes. Although perforation plates and therefore vessels are present in Sarcandra roots, no perforations were observed in tracheary elements of stems or lignotubers. Further, stem tracheids do not have the prominently scalariform end walls that the vessel elements in roots do. Presence of vessels in Sarcandra removes at least one (probably several) hypothetical events of vessel origin that must be postulated to account for known patterns of vessel distribution in angiosperms, assuming that they are primitively vesselless. Seven (perhaps fewer) vessel origin events in angiosperms could account for these patterns; two of those events (Nelumbo and monocotyledons) are different from the others in nature. Widely accepted data on trends of vessel specialization in woody dicotyledons yield an unappreciated implication: vessel specialization has happened in a highly polyphyletic manner in dicotyledons, and therefore multiple vessel origins represent a logical extension backward in time. If a group of vesselless dictyoledons ancestral to other angiosperms existed, they can be hypothesized to have had a relatively homogeneous floral plan now that Sarcandra-like plants no longer need be imagined within that group. Sarcandra and other Chloranthaceae show that the borderline between vessel absence and presence is less sharp than generally appreciated.     

The effect of SEM preparation on pit membrane remnants in vessel element end-walls of primitive angiosperms

Scanning electron microscope (SEM) is necessary to demonstrate presence or absence of pit membranes in possible perforations or the type of pit membrane remnants in perforations in vessel element end-walls of angiosperms, but it was unconfirmed and questionable whether pit membrane absence in pits was affected by the processing and handling before SEM observations. To solve this question, the secondary xylem of four woody species from primitive angiosperms, Illicium henryi Diels. (Illiciaceae), Schisandra rubriflora (Franch.) Rehd. et Wils. (Schisandraceae), Tetracentron sinensis Oliv. and Trochodendron aralioides Sieb. & Zucc. (Trochodendraceae) was chosen and the following techniques were used: (1) fresh materials were examined in low-vacuum with ESEM. (2) Air-dried materials were examined both in low- and high-vacuum with ESEM. (3) Fresh materials fixed in several different fixatives were observed in low-vacuum, respectively. (4) Smooth surface of the material by paraffin section methods was examined in high-vacuum. (5) Materials treated by Jeffrey's Fluid were observed in high-vacuum.Pit membranes and remnants in perforations of fresh material were little different from that of treated materials. Absence of the pit membrane in perforations (pits) in the end-wall was not attributed to the processing and handling. Information of pit membranes and remnants in perforations in end-wall based on the SEM observation might be validly claimed.     

Vessel elements present in the secondary xylem of Trochodendron and Tetracentron (Trochodendraceae)

For almost 150 years, the two monotypic genera Trochodendron and Tetracentron (Trochodendraceae) have been considered to share an unusual and primitive feature in angiosperms - the lack of vessels in their wood. Therefore, they have been classified in a basal position in the angiosperms. Our observations by light microscopy, low-vacuum environmental scanning electron microscopy (ESEM) and high-vacuum scanning electron microscopy (SEM) both in fresh and FAA-fixed materials consistently showed the presence of tracheary elements differentiated into two types in both genera. In Trochodendron, the tracheary elements can be divided into perforate vessel elements and imperforate fiber-tracheids and tracheids. The vessel elements show end and lateral walls. The pits on the end walls are elongate- broadened and do not have membranes or only a few remnants of them forming the perforation plates. The fiber-tracheids show crossfield pit pairs and sharp ends, and the tracheids show bordered pits. In Tetracentron, the tracheary elements comprise vessel elements and fibers. The vessel elements are similar to those of Trochodendron, whereas the fibers have no crossfield pit pairs but, rather, elliptical pits and sharp ends. Thus, both Trochodendron and Tetracentron are vessel bearing rather than vesselless, although their vessel elements are primitive.     

SEM studies on vessels in ferns. 11. Ophioglossum

With scanning electron microscopy (SEM), the nature of metaxylem vessel elements and tracheids was examined in Ophioglossum crotalophomides, 0. pendulum subsp. falcatum , and 0. vulgatum roots and rhizomes. Vessels were identified in all species. End walls of vessel elements, which bear perforations, are like lateral wall pitting of those elements in the secondary wall framework and differ only in absence of pit membranes or presence of pit membrane remnants. Some of the perforations contain pit membrane remnants that have large pores, small porosities, or are threadlike or weblike in structure. Dimorphic perforations were found in some vessel elements of rhizomes of 0. pendulum subsp. falcatum. Tracheids are very likely present in addition to vessels in all three species. The secondary wall framework of both tracheids and vessels is basically scalariform, although deviations in pattern are present. Vessel elements of Ophiglossum are entirely comparable to those of leptosporangiate ferns.     

Functional lifespans of xylem vessels: Development,hydraulic function,and post‐function of vessels in several species of woody plants

Premise of the Study

Xylem vessels transition through different stages during their functional lifespan, including expansion and development of vessel elements, transition to vessel hydraulic functionality, and eventual transition to post‐functionality. We used information on vessel development and function to develop a model of vessel lifespan for woody plants.

Methods

We examined vessel functional lifespan using repeated anatomical sampling throughout the growing season, combined with active‐xylem staining to evaluate vessel hydraulic transport functionality. These data were combined with a literature review. The transitions between vessel functional lifespans for several species are illustrated, including grapevine (Vitis vinifera L., Vitaceae), English oak (Quercus robur L., Fagaceae), American chestnut [Castanea dentata (Marshall) Borkh.; Fagaceae], and several arid and semi‐arid shrub species.

Key Results

In intact woody plants, development and maturation of vessel elements may be gradual. Once hydraulically functional, vessel elements connect to form a vessel network that is responsible for bulk hydraulic flow through the xylem. Vessels become nonfunctional due to the formation of gas emboli. In some species and under some conditions, vessel functionality of embolized conduits may be restored through refilling. Blockages, such as tyloses, gels, or gums, indicate permanent losses in hydraulic functional capacity; however, there may be some interesting exceptions to permanent loss of functionality for gel‐based blockages.

Conclusions

The gradual development and maturation of vessel elements in woody plants, variation in the onset of functionality between different populations of vessels throughout the growing season, and differences in the timing of vessel transitions to post‐functionality are important aspects of plant hydraulic function.