Identification and characterization of Clostridium difficile promoter element that is functional in Escherichia coli

The promoter element involved in the expression of a previously characterized cloned clostridial antigen was isolated and characterized. A restriction fragment containing the promoter element of the Clostridium difficile insert was cloned using the promoter probe vector, pGA46. Subclones of the clostridial DNA insert in pGA46 were then analyzed by nucleotide sequencing and by S1 nuclease experiments. The clostridial promoter element exhibits a high degree of homology with typical Escherichia coli promoter elements. This sequence probably represents a unique class of clostridial promoter elements which, given their ability to function in E. coli and C. difficile, can be used in the construction of a shuttle vector capable of gene expression in E. coli and C. difficile.     

Bacterial Indigo Reduction

We have examined bacterial indigo reduction to provide a basis for the development of a sustainable alternative to the present chemical methods used to reduce indigo for denim dyeing. Indigo was reduced by Clostridium isatidis, but not by the related Clostridium aurantibutyricum, Clostridium celatum nor Clostridium papyrosolvens. However C. papyrosolvens could, like C. isatidis, reduce the soluble dye, indigo carmine. Of the bacteria examined only the supernatant from C. isatidis cultures decreased indigo particle size. An anthraquinone-rich madder root extract, the soluble anthraquinone-2,6-disulfonic acid and humic acid all stimulated the reduction of indigo by C. isatidis, without affecting the redox potential of the cultures. C. isatidis cultures generated redox potentials from -476 to -602 mV vs SCE, which were about 100 mV more negative than those of the other bacteria examined. The mechanism of bacterial indigo reduction remains unknown, but the unique features of the indigo-reducing C. isatidis indicate possible mechanisms.     

Screening for plasmids in the genus Clostridium

A plasmid screening was performed on 150 strains out of 75 clostridial species using a modification of the alkaline-lysis procedure. In 26 strains representing 21 species one or more plasmid bands were detected ranging in size from 3 to more than 100 kilobase pairs. Clostridium aceticum proved to contain a single small plasmid (pCA1) of 5.4 kbp as revealed by restriction analysis and electron microscopy. A physical map of pCA1 has been constructed. Spontaneous mutants of C. aceticum defective in autotrophic growth have been isolated. No direct correlation between plasmid content and autotrophy could be found.Abbreviations EDTA ethylenediaminetetraacetic acid - HEPES N-2-hydroxyethylpiperazine-N-2-ethane-sulfonic acid - TAE Trisacetate-EDTA - Tris tris-(hydroxymethyl)aminomethane     

The nitrogen fixation system of photosynthetic bacteria II. Chromatium nitrogenase activity linked to photochemically generated assimilatory power

The nitrogenase activity (measured by N₂ or acetylene reduction) of cell-free extracts of the photosynthetic bacterium Chromatium was coupled to photochemically generated ATP and reductant. The ATP was formed through cyclic photophosphorylation by bacterial chromatophores. The reductant (reduced ferredoxin) was generated by a heated preparation (incapable of O₂ and ATP production) of spinach chloroplasts. The nitrogenase activity of Chromatium extracts was supported by reduced Chromatium or Clostridium pasteurianum ferredoxin but not by that of spinach chloroplasts.     

Virulence studies on chromosomal α-toxin and Θ-toxin mutants constructed by allelic exchange provide genetic evidence for the essential role of α-toxin in Clostridium perfringens-mediated gas gangrene

The pathogenesis of clostridial myonecrosis, or gas gangrene, involves the growth of the anaerobic bacterium Clostridium perfringens in the infected tissues and the elaboration of numerous extracellular toxins and enzymes. The precise role of each of these toxins in tissue invasion and necrosis has not been determined. To enable genetic approaches to be used to study C. perfringens pathogenesis we developed an allelic exchange method which involved the transformation of C. perfringens cells with a suicide plasmid carrying a gene insertionally inactivated with an erythromycin-resistance determinant. The frequency with which double reciprocal crossover events were observed was increased to a workable level by increasing the amount of homologous DNA located on either side of the inactivated gene. Allelic exchange was used to isolate mutations in the‘chromosomal pfoA gene, which encodes an oxygen-labile haemolysin known as Θ-toxin or perfringolysin O. and in the chromosomal pic gene, which encodes the α-toxin or phospholipase C. The resultant mutants failed to produce detectable Θ-toxin or α-toxin activity, respectively, and could be complemented by recombinant plasmids that carried the respective wild-type genes. The resultant strains were virulence tested in a mouse myonecrosis model. The results showed that the pic mutants had demonstrably reduced virulence and therefore provided definitive genetic evidence for the essential role of α-toxin in gas gangrene or clostridial myonecrosis.     

Extracellular enzyme mutants of Coprinus bilanatus

Mutants for the production of the extracellular enzymes cellulase, xylanase, and amylase have been isolated in the basidiomycete Coprinus bilanatus following ultraviolet irradiation of oidia and screening for enzyme production on solid media. The series of mutants obtained are similar in phenotype to mutants obtained in species of lower fungi such as Trichoderma. Genetic analysis of some of these mutants has shown that they are single gene mutations and are recessive. In crosses the mutants segregate as predicted for the random migration of the nuclei from the basidia into the two spores produced by this secondarily homothallic species.     

Construction of random transposition mutagenesis system in Rhodococcuserythropolis using IS1415

Recent studies on the metabolic activities of genus Rhodococcus have shown rhodococci to be of important use in industrial, pharmaceutical and environmental biotechnology. The increasing economic significance of Rhodococcus encourages renewed efforts to characterize their genetic systems, as Rhodococcus genetics are still poorly understood. The goal of this study is to adapt a transposon system for use in creating random mutagenesis in Rhodococcus erythropolis. A plasmid carrying IS1415, a member of IS21 family identified from Rerythropolis, has been constructed and designated as pTNR. pTNR is a non-replicating transposon tool introduced into target cells by electroporation. During its transposition, the transposable-marker gene is separated from the open reading frames (istAB) of IS1415, which should avoid secondary transposition. Transposition of pTNR into wild-type R. erythropolis created mutagenesis with a high efficiency of 1.23x10(6)mutants per microgram plasmid DNA. However, it could also be transposed into other Rhodococcus spp. at lower frequencies in comparison with that of R. erythropolis. It has been indicated by Southern hybridization that the generated kanamycin-resistant mutants were resulted from single transposition event of pTNR. The results also revealed that the transposable-marker gene of pTNR was randomly inserted into the chromosomal DNA of R. erythropolis. The affected DNA regions carrying the transposed DNA element could be conveniently recovered for further characterization using a plasmid rescue procedure. Sequence data of the insertion sites of 40 random mutants analyzed indicated that transposition of pTNR generated 6-bp direct target duplications in 36 cases, while in the remaining four mutants; it generated 5- or 7-bp target duplications (two cases each). This study concluded that pTNR could be served as an efficient genetic tool for construction of random mutagenesis system in Rhodococcus species.     

Chlorazol Fast Pink as an in Vivo Stain for Unmineralized Bone and Tooth Matrix

The present investigation was carried out with the intention of using in vivo injections of chlorazol fast pink to mark the beginnings of bone formation in experimental skeletal fluorosis. Experiments show, however, that any uncalcified osteoid stains red, irrespective of whether it has been recently laid down or not. The staining is acid fast and hard tissues can be decalcified without loss of the dye. In vivo staining of the matrix by chlorazol fast pink does not appear to affect the growth of the tissue or its subsequent calcification and, therefore, provides a means of labelling bone surfaces at any stage during a continued experiment. Chlorazol fast pink is readily released from bone matrix by the β toxin of Clostridium histolyticum but not by other proteinases, which suggests that the dye is attached to collagen. The matrix of dentine differs from that of bone in that it is attacked both by the β toxin and the γ toxin of Clostridium histolyticum. No explanation of this difference between bone and dentine can be given.     

Development of a yeast system to assay mutational specificity

We have developed a system wherein DNA alterations occurring in a target gene in the yeast Saccharomyces cerevisiae can be determined by DNA sequencing. The target gene, SUP4-o, an ochre suppressor allele of a yeast tyrosine tRNA gene, has been inserted into a shuttle vector (YCpMP2) which is maintained in yeast at a copy number of one per cell Mutations in SUP4-o are selected by virtue of their inactivation of suppressor activity. Rapid DNA preparations from these mutants are used to transform an appropriate bacterial strain. Since YCpMP2 also carries the M13 phage replication origin, superinfection of bacterial cells containing the plasmid with wild-type M13 phage yields single stranded YCpMP2 DNA suitable for dideoxynucleotide chain termination sequencing. We have used this system to examine mutations arising spontaneously in the SUP4-o gene. The spontaneous mutants occurred at a frequency of 3.2 X 10(-6)/viable cell, corresponding to a rate of 2.7 X 10(-7) events/cell division. Following bacterial transformation, 16% of the recovered plasmids tested displayed altered gel mobility consistent with loss of significant portions of the plasmid. Hybridization analysis of total yeast DNA and use of purified YCpMP2 revealed that these very large deletions were not generated in yeast but were associated with bacterial transformation. Among the SUP4-o mutants analyzed by DNA sequencing, we identified each type of single base pair substitution (transitions and transversions), small deletions of varying length (1-32 base pairs) and more extensive deletions of undetermined size. These results demonstrate that the SUP4-o system can be used to detect various types of mutation at numerous sites in a single eukaryotic gene and to characterize the DNA sequence changes responsible for the mutations selected.     

The presence of a SO molecule in [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki as detected by mass spectrometry

The active site of [NiFe] hydrogenase is a binuclear metal complex composed of Fe and Ni atoms and is called the Ni–Fe site, where the Fe atom is known to be coordinated to three diatomic ligands. Two mass spectrometric techniques, pyrolysis-MS (pyrolysis-mass spectrometry) and TOF-SIMS (time-of-flight secondary ion mass spectrometry), were applied to several proteins, including native and denatured forms of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F, [Fe₄S₄]₂-ferredoxin from Clostridium pasteurianum, [Fe₂S₂]-ferredoxin from Spirulina platensis, and porcine pepsin. Pyrolysis-MS revealed that only native hydrogenase liberated SO/SO₂ (ions of m/z 48 and 64 at an equilibrium ratio of SO and SO₂) at relatively low temperatures before the covalent bonds in the polypeptide moiety started to decompose. TOF-SIMS indicated that native Miyazaki hydrogenase released SO/SO₂ (m/z 47.97 and 63.96) as secondary ions when irradiated with a high-energy Ga⁺ beam. Denatured hydrogenase, clostridial ferredoxin, and pepsin did not release SO as a secondary ion. The FT-IR spectrum of the enzyme suggested the presence of CO and CN. These lines of evidence suggest that the three diatomic ligands coordinated to the Fe atom at the Ni–Fe site in Miyazaki hydrogenase are SO, CO, and CN. The role of the SO ligand in helping to cleave H₂ molecules at the active site and stabilizing the Fe atom in the diamagnetic Fe(II) state in the redox cycle of this enzyme is discussed.     

Analysis of the catalytic site of the actin ADP-ribosylating Clostridium perfringens iota toxin

The enzyme component of the actin ADP-ribosylating Clostridium perfringens iota toxin was affinity labelled by UV irradiation in the presence of [carbonyl-¹⁴C]NAD. A peptide containing the radiolabel was generated by CNBr cleavage and subsequent proteolysis with trypsin. Its amino acid sequence is Gly-Ser-Pro-Gly-Ala-Tyr-Leu-Ser-Ala-Ile-Pro-Gly-Tyr-Ala-Gly-X-Tyr-Glu-Val-Leu-Leu-Asn-His-Gly-Ser-Lys corresponding with the region Gly-363 through Lys-388 in the C. perfringens iota toxin. Mass spectrometric data as well as the results of the PTH-amino acid analysis are in line with a modification of a glutamic acid side chain located at position 378. Therefore, in addition to Glu-380, as could be concluded by analogy with other ADP-ribosyltransferases, Glu-378 may play a pivotal role in the active site of C. perfringens iota toxin.     

Trans- and cis-acting elements for the replication of P1 miniplasmids

Replication-deficient mutants of the unit-copy miniplasmid lambda-P1:5R were isolated after hydroxylamine mutagenesis. Complementation tests showed that the majority of these mutants are defective in the production of the repA protein product. Two of these mutants have suppressible nonsense (amber) mutations. The DNA sequence of one of these, repA103, has been determined. The lesion lies within the repA open reading frame, showing that the repA product is essential for plasmid replication. Complementation of deletion mutants of lambda-P1:5R by repA protein showed that the origin of replication lies to the left of repA and that this 300-base-pair origin region is the only portion of the DNA essential for plasmid replication if repA protein is supplied in trans. Six of the 21 hydroxylamine-induced mutants were not complemented by repA. Replication of three of these could be restored by introduction into the plasmid of a wild-type origin region, suggesting that they were origin-defective. The DNA sequence of two mutants was determined. Mutant rep-11 has a 43-base-pair deletion within the incC sequence (incC is a series of five direct repeats of a 19-base-pair sequence known to be involved in the regulation of plasmid replication). The deletion appears to have been generated by homologous recombination between two repeats. Mutant rep-30 has a single base substitution in a region just to the left of incC that destroys one of five G-A-T-C (dam methylation) sites in this region. As lambda-P1:5R is unable to establish itself as a plasmid in a methylase-defective (dam-) strain, it seems probable that methylation of the G-A-T-C sequences is important for origin function. The incC region and the sequences to its left appear to constitute an essential part of the origin of replication.     

Purification of the nitrogenase proteins from Clostridium pasteurianum

A method is described for the purification of the nitrogenase proteins from Clostridium pasteurianum by two polyethylene glycol precipitations and chromatography on columns of DEAE-cellulose, Sephadex G-100 and Sephadex G-200. The Mo-Fe protein and the Fe protein have been purified 70–80-fold from the crude extract, and they appear essentially pure when tested by anaerobic polyacrylamide gel electrophoresis.     

Application of lat gene disruption to increase the clavulanic acid production of Streptomyces clavuligerus

A 1.7 kb fragment of lat was obtained from Streptomyces clavuligerus NRRL 3585, and recombinant plasmid pKC1139-lat, which was used to disrupt the lat gene was constructed. pKC1139-lat was introduced into S. clavuligerus by bi-parental conjugation from Escherichia coli ET12567 to S. clavuligerus. The apramcin-resistant transformants were obtained and through homogeneous single-crossover between recombinant plasmid pKC1139-lat and the S. clavuligerus chromosome lat disrupted mutant strains were obtained. The genome of S. clavuligerus NRRL 3585 and the lat disrupted mutants were analyzed by PCR technique, the bioactivity of cephamycin C in the two kinds of strains were also tested. Both results proved that lat was disrupted by the insertion of pKC1139 in the lat disrupted mutants. And the production of clavulanic acid of these two kinds of strains were analyzed by HPLC with different incubation time interval (96 and 120 h), and the yield in the lat mutants was approximately 2.6 fold higher at their highest production point.     

A Universal Mariner Transposon System for Forward Genetic Studies in the Genus Clostridium

DNA transposons represent an essential tool in the armoury of the molecular microbiologist. We previously developed a catP-based mini transposon system for Clostridium difficile in which the expression of the transposase gene was dependent on a sigma factor unique to C. difficile, TcdR. Here we have shown that the host range of the transposon is easily extended through the rapid chromosomal insertion of the tcdR gene at the pyrE locus of the intended clostridial target using Allele-Coupled Exchange (ACE). To increase the effectiveness of the system, a novel replicon conditional for plasmid maintenance was developed, which no longer supports the effective retention of the transposon delivery vehicle in the presence of the inducer isopropyl β-D-1-thiogalactopyranoside (IPTG). As a consequence, those thiamphenicol resistant colonies that arise in clostridial recipients, following plating on agar medium supplemented with IPTG, are almost exclusively due to insertion of the mini transposon into the genome. The system has been exemplified in both Clostridium acetobutylicum and Clostridium sporogenes, where transposon insertion has been shown to be entirely random. Moreover, appropriate screening of both libraries resulted in the isolation of auxotrophic mutants as well as cells deficient in spore formation/germination. This strategy is capable of being implemented in any Clostridium species.     

Evaluation of hydrogen peroxide vapour as a method for the decontamination of surfaces contaminated with Clostridium botulinum spores

The aim of this study was to evaluate the efficacy of hydrogen peroxide vapour (HPV) against spores of Clostridium botulinum, for use as a method for decontaminating environments where this pathogen has been handled. Spores were dried onto stainless steel slides and exposed to HPV in a sealed glovebox enclosure, transferred to a quenching agent at timed intervals during the exposure period, before survivors were cultured and enumerated. D-values were calculated from graphs of log₁₀ survivors plotted against time and were found to range from 1.41 to 4.38 min. HPV was found to be effective at deactivating spores of toxigenic Cl. botulinum, non-toxigenic Clostridium spp. and Geobacillus stearothermophilus dried onto stainless steel surfaces. HPV could be used to decontaminate cabinets and rooms where Cl. botulinum has been handled. The cycle parameters should be based on studies carried out with relevant spores of this organism, rather than based on inactivation data for G. stearothermophilus spores, which have been used in the past as a standard biological challenge for disinfection and sterilisation procedures. HPV could provide an attractive alternative to other decontamination methods, as it was rapid, residue-free and did not give rise to the health and safety concerns associated with other gaseous decontamination systems.