Immobilization and characterization of lipase from an indigenous Bacillus aryabhattai SE3-PB isolated from lipid-rich wastewater

Abstract

Extracellular lipase from an indigenous Bacillus aryabhattai SE3-PB was immobilized in alginate beads by entrapment method. After optimization of immobilization conditions, maximum immobilization efficiencies of 77%?±?1.53% and 75.99%?±?3.49% were recorded at optimum concentrations of 2% (w/v) sodium alginate and 0.2?M calcium chloride, respectively, for the entrapped enzyme. Biochemical properties of both free and immobilized lipase revealed no change in the optimum temperature and pH of both enzyme preparations, with maximum activity attained at 60?°C and 9.5, respectively. In comparison to free lipase, the immobilized enzyme exhibited improved stability over the studied pH range (8.5–9.5) and temperature (55–65?°C) when incubated for 3?h. Furthermore, the immobilized lipase showed enhanced enzyme-substrate affinity and higher catalytic efficiency when compared to soluble enzyme. The entrapped enzyme was also found to be more stable, retaining 61.51% and 49.44% of its original activity after being stored for 30 days at 4?°C and 25?°C, respectively. In addition, the insolubilized enzyme exhibited good reusability with 18.46% relative activity after being repeatedly used for six times. These findings suggest the efficient and sustainable use of the developed immobilized lipase for various biotechnological applications.     

Characterization of microbial endo-β-glucanase immobilized in alginate beads

Endo-β-glucanase (endo-β-1,4-glucano-glucanase EC 3.2.1.4), isolated from Trichoderma reesei, was immobilized in calcium alginate beads, retaining 75% of its original activity. The polyanionic moiety surrounding the immobilized enzyme displaced the pH-activity profile to alkaline regions with respect to that of the free enzyme. The enzyme was inhibited by carboxymethylcellulose, but this inhibition appeared to be decreased by immobilizatíon. The enzyme immobilized in alginate beads showed a K_m value (1.02% w/v) lower than that of the enzyme (1.31%). The apparent V_max of immobilized cellulase preparations (238.3 μmol glucose/ml × h) decreased by a factor of 0.59 with respect to that of the soluble enzyme. The optimum temperature (60°C) of the free and entrapped enzymes remained unaltered. In contrast, the half-life of the endoglucanase immobilized in calciumalginate beads was 4.6 h at 55°C and 5.4 h at 60°C, while that of the free enzyme was 3.0 h at 55°C and 1.2 h at 60°C. A technological application of the immobilized enzymes was tested using wheat straw as a source of fermentable sugars. The hydrolytic degradation of straw, by means of a crude extract of free and immobilized cellulases and β-glucosidase, released a large amount of reducing sugars from wheat straw after 48 h (between 250–720 mg glucose/g straw), carrying out more than a 90% saccharification. A mixture of immobilized β-glucosidase and free cellulases maintained 80% of the activity of the soluble counterparts, and the co-immobilization of both types of enzymes reduced by hydrolytic efficiency to half.     

Optimization of α‐Amylase Immobilization in Calcium Alginate Beads

Abstract

α‐Amylase enzyme was produced by Aspergillus sclerotiorum under SSF conditions, and immobilized in calcium alginate beads. Effects of immobilization conditions, such as alginate concentration, CaCl₂ concentration, amount of loading enzyme, bead size, and amount of beads, on enzymatic activity were investigated. Optimum alginate and CaCl₂ concentration were found to be 3% (w/v). Using a loading enzyme concentration of 140 U mL^?1, and bead (diameter 3 mm) amount of 0.5 g, maximum enzyme activity was observed. Beads prepared at optimum immobilization conditions were suitable for up to 7 repeated uses, losing only 35% of their initial activity. Among the various starches tested, the highest enzyme activity (96.2%) was determined in soluble potato starch hydrolysis for 120 min at 40°C.     

Physico-Chemical Characterization of Watermelon Urease upon Immobilization in Alginate Beads

Watermelon (Citrullus vulgaris) urease was immobilized in 3.5% alginate leading to 72% immobilization. There was no leaching of the enzyme over a period of 15 days at 4°C. It continued to hydrolyse urea at a faster rate upto 90 min of incubation. The immobilized urease exhibited a shift of apparent pH optimum by one unit towards acidic side (from pH 8.0 to 7.0). The K_m was found to be 13.3 mM; 1.17 times higher than the soluble enzyme (11.4 mM). The beads were fairly stable upto 50°C and exhibited activity even at ?10°C. The enzyme was significantly activated by ME and it exhibited two peaks of activation; one at lower concentration and another at higher concentration. Time-dependent ureolysis in presence of ME progressed at a much elevated rate. Unlike soluble enzyme, which was inhibited at 200 mM urea, the immobilized enzyme was inhibited at 600 mM of urea and above, and about 47% activity was retained at 2000 mM urea. Moreover, the inhibition caused by high urea concentration was partially abolished by ME. The significance of the observations is discussed.     

Phytate degradation by immobilized<Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> phytase in soybean-curd whey

Saccharomyces cerevisiae CY phytase-producing cells were immobilized in calcium alginate beads and used for the degradation of phylate. The maximum activity and immobilization yield of the immobilized phytase reached 280 mU/g-bead and 43%, respectively. The optimal pH of the immobilized cell phytase was not different from that of the free cells. However, the optimum temperature for the immobilized phytase was 50°C, which was 10°C higher than that of the free cells; pH and thermal stability were enhanced as a consequence of immobilization. Using the immobilized phytase, phytate was degraded in a stirred tank bioreactor. Phytate degradation, both in a buffer solution and in soybean-curd whey mixture, showed very similar trends. At an enzyme dosage of 93.9 mU/g-phytate, half of the phytate was degraded after 1 h of hydrolysis. The operational stability of the immobilized beads was examined with repeated batchwise operations. Based on 50% conversion of the phytate and five times of reuse of the immobilized beads, the specific degradation (g phytate/g dry cell weight) for the immobilized phytase increased 170% compared to that of the free phytase.     

Improved Properties of Bacillus coagulans β‐Galactosidase through Immobilization

Thermostable β‐galactosidase from Bacillus coagulans RCS3 was purified by successive column chromatography using DEAE‐cellulose and Sephadex G‐50. Immobilization of the purified enzyme was studied with DEAE‐cellulose and calcium alginate. The efficiency of β‐galactosidase retention was 87 % with DEAE‐cellulose (17 mg protein/mL of matrix) and 80 % with calcium alginate (2.2 mg protein/g bead). Comparative studies of immobilization displayed a shift in the optimum temperature from 65 °C to 70 °C provoked by DEAE‐cellulose, although no effect was observed with calcium alginate. The heat inactivation curve revealed an improvement in the stability (t_1/2 of 14.5 h for the immobilized enzyme as compared to 2 h for the free enzyme at 65 °C) in a calcium alginate system. This immobilized enzyme has a wide pH stability range (6.5–11). β‐Galactosidase immobilized by DEAE‐cellulose and calcium alginate allowed a 57 and 70 % lactose hydrolysis, respectively, to be achieved within 48 h after repeated use for twenty times.     

Stabilization of native and double <Emphasis Type="SmallCaps">d</Emphasis>-amino acid oxidases from <Emphasis Type="Italic">Rhodosporidium toruloides</Emphasis> and <Emphasis Type="Italic">Trigonopsis variabilis</Emphasis> by immobilization on streptavidin-coated magnetic beads

Double d-amino acid oxidases (dRtDAO and dTvDAO) were previously genetically constructed by linking the C-terminus of one subunit of their corresponding native DAOs from Rhodosporidium toruloides and Trigonopsis variabilis (RtDAO and TvDAO) to the N-terminus of the other identical subunit. We have now immobilized these double DAOs and their native counterparts onto streptavidin-coated magnetic beads through the interaction between biotin and streptavidin. The catalytic efficiencies (k_cat/K_M) of immobilized DAOs toward d-alanine and cepharosporin C remained similar to those of their soluble forms, except the catalytic efficiency of immobilized TvDAO toward d-alanine was decreased by 56%. After immobilization, the T_m value for RtDAO was shifted 15°C higher to 60°C, while those for dRtDAO, TvDAO and dTvDAO were increased by 5–8°C to 56, 60 and 60°C, respectively. In the presence of 10 mM H₂O₂, immobilized RtDAO, dRtDAO, TvDAO and dTvDAO exhibited half-lives of about 8, 10, 3 and 5 h, respectively, giving 16-, 10-, 6- and 7-fold greater stability than their soluble forms, respectively. Therefore, immobilization through biotin–streptavidin affinity binding enhances the thermal and oxidative stability of native and double DAOs studied, especially RtDAO. The additive stabilizing effect of subunit fusion and immobilization was more pronounced in the case of RtDAO than TvDAO.     

Effect of calcium on immobilization of rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) peroxidase for bioassays in sodium alginate and Agarose gel

The direct immobilization of soluble peroxidase isolated and partially purified from shoots of rice seedlings in calcium alginate beads and in calcium agarose gel was carried out. Peroxidase was assayed for guaiacol oxidation products in presence of hydrogen peroxide. The maximum specific activity and immobilization yield of the calcium agarose immobilized peroxidase reached 2,200 U mg⁻¹ protein (540 mU cm⁻³ gel) and 82%, respectively. In calcium alginate the maximum activity of peroxidase upon immobilization was 210 mU g⁻¹ bead with 46% yield. The optimal pH for agarose immobilized peroxidase was 7.0 which differed from the pH 6.0 for soluble peroxidase. The optimum temperature for the agarose immobilized peroxidase however was 30°C, which was similar to that of soluble peroxidase. The thermal stability of calcium agarose immobilized peroxidase significantly enhanced over a temperature range of 30∼60°C upon immobilization. The operational stability of peroxidase was examined with repeated hydrogen peroxide oxidation at varying time intervals. Based on 50% conversion of hydrogen peroxide and four times reuse of immobilized gel, the specific degradation of guaiacol for the agarose immobilized peroxidase increased three folds compared to that of soluble peroxidase. Nearly 165% increase in the enzyme protein binding to agarose in presence of calcium was noted. The results suggest that the presence of calcium, ions help in the immobilization process of peroxidase from rice shoots and mediates the direct binding of the enzyme to the agarose gel and that agarose seems to be a better immobilization matrix for peroxidase compared to sodium alginate.     

Characterization and immobilization on nickel-chelated Sepharose of a glutamate decarboxylase A from Lactobacillus brevis BH2 and its application for production of GABA

A gene encoding glutamate decarboxylase A (GadA) from Lactobacillus brevis BH2 was expressed in a His-tagged form in Escherichia coli cells, and recombinant protein exists as a homodimer consisting of identical subunits of 53?kDa. GadA was absolutely dependent on the ammonium sulfate concentration for catalytic activity and secondary structure formation. GadA was immobilized on the metal affinity resin with an immobilization yield of 95.8%. The pH optima of the immobilized enzyme were identical with those of the free enzyme. However, the optimum temperature for immobilized enzyme was 5?°C higher than that for the free enzyme. The immobilized GadA retained its relative activity of 41% after 30 reuses of reaction within 30?days and exhibited a half-life of 19 cycles within 19?days. A packed-bed bioreactor with immobilized GadA showed a maximum yield of 97.8% GABA from 50?mM l-glutamate in a flow-through system under conditions of pH 4.0 and 55?°C.     

Protease production by immobilized growing cells of Serratia marcescens and Myxococcus xanthus in calcium alginate gel beads

Summary Serratia marcescens and Myxococcus xanthus cells were immobilized in calcium alginate gel beads. Immobilization under various conditions had no effect on the extracellular proteolytic activity of S. marcescens cells. Protease production seemed rather to depend on the free cells in the medium. However, the stability over time of enzyme production was enhanced, as immobilization increased protease production half-life from 5 to 12 days. On the other hand, Myxococcus xanthus produced proteases inside the gel beads which could diffuse into the medium. The proteolytic activity increased as a function of the initial cell content of the beads and of the bead inoculum. Compared to free cells, immobilized cells of Myxococcus xanthus could produce 8 times more proteolytic activity, with a very low free-cell concentration in the medium.     

Immobilization and characterization of cellulase on concanavalin A (Con A)-layered calcium alginate beads

Cellulase has been immobilized on hybrid concanavalin A (Con A)-layered calcium alginate–starch beads. Immobilized cellulase retained about 82% of its activity. Con A was extracted from jack bean and the obtained crude protein was characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis. The immobilized beads showed high mechanical and storage stability; immobilized cellulase retained 100% and 85% activity at 4°C and 30°C, respectively, over one month. The immobilized cellulase retained about 70% of its activity after five cycles of use. The immobilized cellulase retained 70% activity after 120-min exposure to 60°C, whereas the soluble form only retained about 20%, showing that immobilization improved thermal stability. Surface morphology and elemental analysis of immobilized cellulase were examined using scanning electron microscope equipped with energy-dispersive X-ray. Based on the enzyme stability and reuse, this method of immobilization is both convenient and cheap.     

Immobilization of whole cells ofStreptomyces kanamyceticus containing glucose isomerase by a combination of heat treatment in the presence of minerals and entrapment in calcium alginate gels

A method of immobilization of whole cells ofStreptomyces kanamyceticus containing glucose isomerase was devised, based on techniques of heat fixation in the presence of minerals and, entrapment in calcium alginate gels. The optimum activity of the enzyme was obtained when the cells were heat-fixed at 60°C for 10 min in the presence of 50 mmol/L MgSO₄·7H₂O and 5 mmol/L CoCl₂·6H₂O and then cast into calcium alginate beads using 2% sodium alginate.     

Biodegradation of Naphthalene by Pseudomonas stutzeri in Marine Environments: Testing Cells Entrapment in Calcium Alginate for Use in Water Detoxification

The biodegradation of naphthalene in sea water by freely suspended and alginate-entrapped cells of Pseudomonas stutzeri 19SMN4 has been investigated in batch cultures. The results showed that immobilized cells can be stored at 4°C for 1 month without loss of viability. The biodegradation was highly affected by the availability of nitrogen and phosphorous, so at 30°C a naphthalene concentration of 25 mM was almost completely degraded (93%) by free cells in 6 days in samples supplemented with these nutrients, whereas only 42% naphthalene was consumed in the nonsupplemented samples. Biodegradation was much slower at 16°C than at 30°C; after 6 days of culture at 30°C, almost all naphthalene was degradated by free and immobilized cells, whereas only 22% and 34% at 16°C, respectively. The degradation rate remained unaffected when the naphthalene concentration was reduced from 25 to 10 mM. Alginate of three different viscosities was used for immobilization of cells. After 7 days of culture, beads formed with 31.4 cP alginate were fragmented, whereas beads formed with 240 and 3600 cP did not display structural changes and afforded the same degradation rate. Beads formed with high-viscosity alginate retained cells more efficiently.     

A new method for immobilization of acetylcholinesterase

A new method for immobilization of acetylcholinesterase (AChE) to alginate gel beads by activating the carbonyl groups of alginate using carbodiimide coupling agent has been successfully developed. Maximum reaction rate (V _max) and Michaelis–Menten constant (K _m) were determined for the free and binary immobilized enzyme. The effects of pH, temperature, storage stability, reuse number and thermal stability on the free and immobilized AChE were also investigated. For the free and binary immobilized enzyme on the Ca–alginate gel beads, optimum pH values were found to be 7 and 8, respectively. Optimum temperatures for the free and immobilized enzyme were observed to be 30 and 35 °C, respectively. Upon 60 days of storage the preserved activity of free and immobilized enzyme were found as 4 and 68%, respectively. In addition, reuse number, and thermal stability of the free AChE were increased by as a result of binary immobilization.     

Immobilization of tomato (Lycopersicon esculentum) pectinmethylesterase in calcium alginate beads and its application in fruit juice clarification

Clarity of fruit juices is desirable to maintain an aesthetically pleasing quality and international standards. The most commonly used enzymes in juice industries are pectinases. A partially-purified pectinmethylesterase from tomato was entrapped in calcium alginate beads and used for juice clarification. The activity yield was maximum at 1 % (w/v) CaCl₂ and 2.5 % (w/v) alginate. The immobilized enzyme retained ~55 % of its initial activity (5.7 × 10^?2 units) after more than ten successive batch reactions. The K_m, pH and temperature optima were increased after immobilization. The most effective clarification of fruit juice (%T₆₂₀ ~60 %) by the immobilized enzyme was at 4 °C with a holding time of 20 min. The viscosity dropped by 56 % and the filterability increased by 260 %. The juice remains clear after 2 months of storage at 4 °C.     

Potential application of immobilized streptokinase extracted from Streptococcus equinus VIT_VB2

Streptokinase purified from Streptococcus equinus VIT_VB2 isolated from bovine milk sample was immobilized in various solid supports namely entrapment in agarose gel, calcium alginate beads and gelatin gel by cross-linking with formaldehyde. Immobilization of streptokinase in calcium alginate beads showed maximum efficiency (81.8?±?1.06%) when compared with entrapment with agarose gel (55.6?±?2.17%) and cross-linked gelatin formaldehyde gel (71.0?±?1.54%). The purified SK activity was expressed maximum in calcium alginate (1%) and gelatin gel (0.25%) with 1292.68?±?1.33 and 1121.9?±?1.2?U?mL^?1, respectively. Similarly, SK entrapped in gelatin gel and calcium alginate showed maximum in vitro blood clot lysis activity with 77.67?±?2.64% and 76.16?±?2.72%, respectively. The immobilized SK in gelatin gel showed complete clot lysis within 15?min; hence, this application of the study could be used in the treatment of superficial thrombophlebitis, phlebitis, and venous thrombosis. These beads were used for three repeated cycles to check the conversion of substrates into their products, and we concluded that SK can be immobilized in the suitable matrices. Therefore, this helps in the drug-delivery strategies in highly efficient way, moreover, economically competent process in the pharmaceutics.     

Immobilization of a thermostable α‐amylase by covalent binding to an alginate matrix increases high temperature usability

Thermostable α‐amylase was covalently bound to calcium alginate matrix to be used for starch hydrolysis at liquefaction temperature of 95°C. 1‐ethyl‐3‐(3‐dimethylamino‐propyl) carbodiimide hydrochloride (EDAC) was used as crosslinker. EDAC reacts with the carboxylate groups on the calcium alginate matrix and the amine groups of the enzyme. Ethylenediamine tetraacetic acid (EDTA) treatment was applied to increase the number of available carboxylate groups on the calcium alginate matrix for EDAC binding. After the immobilization was completed, the beads were treated with 0.1 M calcium chloride solution to reinstate the bead mechanical strength. Enzyme loading efficiency, activity, and reusability of the immobilized α‐amylase were investigated. Covalently bound thermostable α‐amylase to calcium alginate produced a total of 53 g of starch degradation/mg of bound protein after seven consecutive starch hydrolysis cycles of 10 min each at 95°C in a stirred batch reactor. The free and covalently bound α‐amylase had maximum activity at pH 5.5 and 6.0, respectively. The Michaelis‐Menten constant (K_m) of the immobilized enzyme (0.98 mg/mL) was 2.5 times greater than that of the free enzyme (0.40 mg/mL). The maximum reaction rate (V_max) of immobilized and free enzyme were determined to be 10.4‐mg starch degraded/mL min mg bound protein and 25.7‐mg starch degraded/mL min mg protein, respectively. The high cumulative activity and seven successive reuses obtained at liquefaction temperature make the covalently bound thermostable α‐amylase to calcium alginate matrix, a promising candidate for use in industrial starch hydrolysis process. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Preparation of active corn peptides from zein through double enzymes immobilized with calcium alginate–chitosan beads

Double enzymes (alcalase and trypsin) were effectively immobilized in a composite carrier (calcium alginate–chitosan) to produce immobilized enzyme beads referred to as ATCC. The immobilization conditions for ATCC were optimized, and the immobilized enzyme beads were characterized. The optimal immobilization conditions were 2.5% of sodium alginate, 10:4 sodium alginate to the double enzymes, 3:7 chitosan solution to CaCl₂ and 2.5 h immobilization time. The ATCC beads had greatly enhanced stability and good usability compared with the free form. The ATCC residual activity was retained at 88.9% of DH (degree of hydrolysis) after 35 days of storage, and 36.0% of residual activity was retained after three cycles of use. The beads showed a higher zein DH (65.8%) compared with a single enzyme immobilized in the calcium alginate beads (45.5%) or free enzyme (49.3%). The ATCC kinetic parameters V_max and apparent K_m were 32.3 mL/min and 456.62 g⁻¹, respectively. Active corn peptides (CPs) with good antioxidant activity were obtained from zein in the ethanol phase. The ATCC might be valuable for preparing CPs and industrial applications.     

Immobilization of Kluyveromyces marxianus cells containing inulinase activity in open pore gelatin matrix: 1. Preparation and enzymatic properties

Kluyveromyces marxianus cells with inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7) activity have been immobilized in open pore gelatin pellets with retention of > 90% of the original activity. The open pore gelatin pellets with entrapped yeast cells were obtained by selective leaching out of calcium alginate from the composite matrix, followed by crosslinking with glutaraldehyde. Enzymatic properties of the gelatin-entrapped cells were studied and compared with those of the free cells. The immobilization procedure did not alter the optimum pH of the enzymatic preparation; the optimum for both free and immobilized cells was pH 6.0. The optimum temperature of inulin hydrolysis was 10°C higher for immobilized cells. Activation energies for the reaction with the free and immobilized cells were calculated to be 6.35 and 2.26 kcal mol^?1, respectively. K_m values were 8 mM inulin for the free cells and 9.52 mM for the immobilized cells. The thermal stability of the enzyme was improved by immobilization. Free and immobilized cells showed fairly stable activities between pH 4 and 7, but free cell inulinase was more labile at pH values below 4 and above 7 compared to the immobilized form. There was no loss of enzyme activity of the immobilized cells on storage at 4°C for 30 days. Over the same period at room temperature only 6% of the original activity was lost.     

Immobilization of thermostable exo-inulinase from mutant thermophilic Aspergillus tamarii-U4 using kaolin clay and its application in inulin hydrolysis

In this study, attempts were made to immobilize purified exo-inulinase from mutant thermophic Aspergillus tamarii-U4 onto Kaolinite clay by covalent bonding cross-linked with glutaraldehyde with an immobilization yield of 66% achieved. The free and immobilized inulinases were then characterized and characterization of the enzymes revealed that temperature and pH optima for the activity of the free and immobilized enzymes were both 65?°C and pH 4.5 respectively. The free inulinase completely lost its activity after incubation at 65?°C for 6 h while the immobilized inulinase retained 16.4% of its activity under the same condition of temperature and incubation time. The estimated kinetic parameters K_m and V_max for the free inulinase as estimated from Lineweaver-Burk plots were 0.39?mM and 4.21?µmol/min for the free inulinase and 0.37?mM and 4.01?µmol/min for the immobilized inulinase respectively. Inulin at 2.5% (w/v) and a flow rate of 0.1?mL was completely hydrolysed for 10?days at 60?°C in a continuous packed bed column and the operational stability of the system revealed that the half-life of the immobilized inulinase was 51?days. These properties make the immobilized exo-inulinase from Aspergillus tamarii-U4 a potential candidate for the production of fructose from inulin hydrolysis.