Charge transport by ion translocating membrane proteins on solid supported membranes.

A new method for the investigation of ion translocating membrane proteins is presented. Protein containing membrane fragments or vesicles are adsorbed to a solid supported membrane. The solid supported membrane consists of a lipid monolayer on a gold evaporated or gold sputtered glass substrate which is coated with a long chained mercaptan (CH3(CH2)mSH, m = 15, 17). Specific conductance and specific capacitance of the solid supported membrane are comparable to those of a black lipid membrane. However, the solid supported membrane has the advantage of a much higher mechanical stability. The electrical activity of bacteriorhodopsin, Na,K-ATPase, H,K-ATPase, and Ca-ATPase on the solid supported membrane is measured and compared to signals obtained on a conventionally prepared black lipid membrane. It is shown that both methods yield similar results. The solid supported membrane therefore represents an alternative method for the investigation of electrical properties of ion translocating transmembrane proteins.     

Vesicle deposition and subsequent membrane–melittin interactions on different substrates: A QCM-D experiment

Quartz crystal microbalance with dissipation (QCM-D) technique is one of the most effective methods to monitor the dynamic behaviors of a layer on a solid surface. Moreover, it has been reported recently that it is able to provide a fingerprint for the peptide–membrane interactions. In this work, QCM-D technique combined with computer simulations was employed to investigate the deposition and transformation of vesicles, as well as the subsequent membrane–melittin interactions on different substrates. A range of substrate surfaces, i.e. naked SiO₂ without or with Au/polyelectrolyte coating, were produced. The nature of the substrate determined whether the adsorbed vesicles were present as a high-quality supported bilayer or an assembled vesicle matrix, which consequently influenced the membrane–melittin interactions. It was indicated by the related computer simulations that the lipid packing state of the membrane was a key factor to determine the mechanism of membrane–peptide interactions. Furthermore, this work might be a good example of the application of QCM-D for the exploration of membrane-active peptides.     

Supported double membranes

Planar model membranes, like supported lipid bilayers and surface-tethered vesicles, have been proven to be useful tools for the investigation of complex biological functions in a significantly less complex membrane environment. In this study, we introduce a supported double membrane system that should be useful for studies that target biological processes in the proximity of two lipid bilayers such as the periplasm of bacteria and mitochondria or the small cleft between pre- and postsynaptic neuronal membranes. Large unilamellar vesicles (LUV) were tethered to a preformed supported bilayer by a biotin–streptavidin tether. We show from single particle tracking (SPT) experiments that these vesicle are mobile above the plane of the supported membrane. At higher concentrations, the tethered vesicles fuse to form a second continuous bilayer on top of the supported bilayer. The distance between the two bilayers was determined by fluorescence interference contrast (FLIC) microscopy to be between 16 and 24 nm. The lateral diffusion of labeled lipids in the second bilayer was very similar to that in supported membranes. SPT experiments with reconstituted syntaxin-1A show that the mobility of transmembrane proteins was not improved when compared with solid supported membranes.     

Electrostriction and dynamics of solid supported lipid films

This review reports the significance of bilayer lipid membranes on a solid support (sBLM) for the construction of biosensors. The methods of formation of lipid membranes on different solid supports including different metals (silver, gold, stainless steel), agar and conducting polymers are presented. Several examples of the application of electrostriction and dielectric relaxation methods for the study of mechanical properties and dynamics of solid supported bilayers have been shown. We demonstrated that these methods are useful for determination of the binding of enzymes and antibodies to sBLM, for the study of hybridization of nucleic acids on membrane surfaces and for the study of physical properties of modified supported membranes.     

Charge translocation by the Na+/K+-ATPase investigated on solid supported membranes: rapid solution exchange with a new technique.

Adsorption of Na+/K+-ATPase containing membrane fragments from pig kidney to lipid membranes allows the detection of electrogenic events during the Na+/K+-ATPase reaction cycle with high sensitivity and time resolution. High stability preparations can be obtained using solid supported membranes (SSM) as carrier electrodes for the membrane fragments. The SSMs are prepared using an alkanethiol monolayer covalently linked to a gold surface on a glass substrate. The hydrophobic surface is covered with a lipid monolayer (SAM, self-assembled monolayer) to obtain a double layer system having electrical properties similar to those of unsupported bilayer membranes (BLM). As we have previously shown (, Biophys. J. 64:384-391), the Na+/K+-ATPase on a SSM can be activated by photolytic release of ATP from caged ATP. In this publication we show the first results of a new technique which allows rapid solution exchange at the membrane surface making use of the high mechanical stability of SSM preparations. Especially for substrates, which are not available as a caged substance-such as Na+ and K+-this technique is shown to be capable of yielding new results. The Na+/K+-ATPase was activated by rapid concentration jumps of ATP and Na+ (in the presence of ATP). A time resolution of up to 10 ms was obtained in these experiments. The aim of this paper is to present the new technique together with the first results obtained from the investigation of the Na+/K+-ATPase. A comparison with data taken from the literature shows considerable agreement with our experiments.     

Lipid diffusion in planar membranes investigated by fluorescence correlation spectroscopy

Investigation of lipid lateral mobility in biological membranes and their artificial models provides information on membrane dynamics and structure; methods based on optical microscopy are very convenient for such investigations. We focus on fluorescence correlation spectroscopy (FCS), explain its principles and review its state of the art versions such as 2-focus, Z-scan or scanning FCS, which overcome most artefacts of standard FCS (especially those resulting from the need for an external calibration) making it a reliable and versatile method. FCS is also compared to single particle tracking and fluorescence photobleaching recovery and the applicability and the limitations of the methods are briefly reviewed. We discuss several key questions of lateral mobility investigation in planar lipid membranes, namely the influence which membrane and aqueous phase composition (ionic strength and sugar content), choice of a fluorescent tracer molecule, frictional coupling between the two membrane leaflets and between membrane and solid support (in the case of supported membranes) or presence of membrane inhomogeneities has on the lateral mobility of lipids. The recent FCS studies addressing those questions are reviewed and possible explanations of eventual discrepancies are mentioned.     

Membrane–drug interactions studied using model membrane systems

The direct interaction of drugs with the cell membrane is often neglected when drug effects are studied. Systematic investigations are hindered by the complexity of the natural membrane and model membrane systems can offer a useful alternative. Here some examples are reviewed of how model membrane architectures including vesicles, Langmuir monolayers and solid supported membranes can be used to investigate the effects of drug molecules on the membrane structure, and how these interactions can translate into effects on embedded membrane proteins.     

Kinetics of electrogenic transport by the ADP/ATP carrier.

The electrogenic transport of ATP and ADP by the mitochondrial ADP/ATP carrier (AAC) was investigated by recording transient currents with two different techniques for performing concentration jump experiments: 1) the fast fluid injection method: AAC-containing proteoliposomes were adsorbed to a solid supported membrane (SSM), and the carrier was activated via ATP or ADP concentration jumps. 2) BLM (black lipid membrane) technique: proteoliposomes were adsorbed to a planar lipid bilayer, while the carrier was activated via the photolysis of caged ATP or caged ADP with a UV laser pulse. Two transport modes of the AAC were investigated, ATP(ex)-0(in) and ADP(ex)-0(in). Liposomes not loaded with nucleotides allowed half-cycles of the ADP/ATP exchange to be studied. Under these conditions the AAC transports ADP and ATP electrogenically. Mg(2+) inhibits the nucleotide transport, and the specific inhibitors carboxyatractylate (CAT) and bongkrekate (BKA) prevent the binding of the substrate. The evaluation of the transient currents yielded rate constants of 160 s(-1) for ATP and >/=400 s(-1) for ADP translocation. The function of the carrier is approximately symmetrical, i.e., the kinetic properties are similar in the inside-out and right-side-out orientations. The assumption from previous investigations, that the deprotonated nucleotides are exclusively transported by the AAC, is supported by further experimental evidence. In addition, caged ATP and caged ADP bind to the carrier with similar affinities as the free nucleotides. An inhibitory effect of anions (200-300 mM) was observed, which can be explained as a competitive effect at the binding site. The results are summarized in a transport model.     

Introduction to Solid Supported Membrane Based Electrophysiology

The electrophysiological method we present is based on a solid supported membrane (SSM) composed of an octadecanethiol layer chemisorbed on a gold coated sensor chip and a phosphatidylcholine monolayer on top. This assembly is mounted into a cuvette system containing the reference electrode, a chlorinated silver wire.After adsorption of membrane fragments or proteoliposomes containing the membrane protein of interest, a fast solution exchange is used to induce the transport activity of the membrane protein. In the single solution exchange protocol two solutions, one non-activating and one activating solution, are needed. The flow is controlled by pressurized air and a valve and tubing system within a faraday cage.The kinetics of the electrogenic transport activity is obtained via capacitive coupling between the SSM and the proteoliposomes or membrane fragments. The method, therefore, yields only transient currents. The peak current represents the stationary transport activity. The time dependent transporter currents can be reconstructed by circuit analysis.This method is especially suited for prokaryotic transporters or eukaryotic transporters from intracellular membranes, which cannot be investigated by patch clamp or voltage clamp methods.     

Functional tethered membranes

Phospholipid bilayer membranes at the interface between a substrate and an aqueous phase, supported by or tethered to the solid surface via a polymer cushion, a peptide-, protein-, or oligosaccharide-coupling layer have reached a stage at which they are important as a novel model membrane system but also offer potential for practical applications (e.g. for biosensing purposes with membrane-integral receptors). We briefly summarize some of the recent progress made in the structural characterization of the build-up of these rather complex interfacial architectures, in the functionalization of the pure lipid matrix by the reconstitution of proteins, and in the lateral patterning of the membranes as a prerequisite for the construction of membrane chips for massive parallel monitoring of binding events.     

Charge translocation by the Na+/K+-ATPase investigated on solid supported membranes: cytoplasmic cation binding and release.

In the preceding publication (. Biophys. J. 76:000-000) a new technique was described that was able to produce concentration jumps of arbitrary ion species at the surface of a solid supported membrane (SSM). This technique can be used to investigate the kinetics of ion translocating proteins adsorbed to the SSM. Charge translocation of the Na+/K+-ATPase in the presence of ATP was investigated. Here we describe experiments carried out with membrane fragments containing Na+/K+-ATPase from pig kidney and in the absence of ATP. Electrical currents are measured after rapid addition of Na+. We demonstrate that these currents can be explained only by a cation binding process on the cytoplasmic side, most probably to the cytoplasmic cation binding site of the Na+/K+-ATPase. An electrogenic reaction of the protein was observed only with Na+, but not with other monovalent cations (K+, Li+, Rb+, Cs+). Using Na+ activation of the enzyme after preincubation with K+ we also investigated the K+-dependent half-cycle of the Na+/K+-ATPase. A rate constant for K+ translocation in the absence of ATP of 0.2-0.3 s-1 was determined. In addition, these experiments show that K+ deocclusion, and cytoplasmic K+ release are electroneutral.     

The effect of substrate and epidermal growth factor on human placental trophoblast cells in culture

Summary Attempts were made to select for trophoblast cells in cultures of mixed cell populations derived from preterm (7 to 12 wk) or term human placentas. Epidermal growth factor added to cultures on solid or porous supports caused proliferation of epithelial-type cells to give a confluent monolayer but did not increase the expression of differentiated function. The presence or absence of placental basement membrane collagen as substrate made little apparent difference; however a porous basement membrane collagen support led to increased differentiated function. Initial production of human chorionic gonadotrophin was increased and after 4 wk in culture a substantial proportion of the cells exhibited alkaline phosphatase activity. Epidermal growth factor and a substrate of placental basement membrane collagen on a porous support favorably influence the growth and differentiation of human trophoblast cells in culture. This work was supported by funds from the Medical Research Council of New Zealand which also provided support for Dr. Truman as a Postdoctoral Fellow.     

Systematic measurements of interleaflet friction in supported bilayers

When lipid membranes curve or are subjected to strong shear forces, the two apposed leaflets of the bilayer slide past each other. The drag that one leaflet creates on the other is quantified by the coefficient of interleaflet friction, b. Existing measurements of this coefficient range over several orders of magnitude, so we used a recently developed microfluidic technique to measure it systematically in supported lipid membranes. Fluid shear stress was used to force the top leaflet of a supported membrane to slide over the stationary lower leaflet. Here, we show that this technique yields a reproducible measurement of the friction coefficient and is sensitive enough to detect differences in friction between membranes made from saturated and unsaturated lipids. Adding cholesterol to saturated and unsaturated membranes increased interleaflet friction significantly. We also discovered that fluid shear stress can reversibly induce gel phase in supported lipid bilayers that are close to the gel-transition temperature.     

Reconstitution of functional electron transfer between membrane biological elements in a two-dimensional lipidic structure at the electrode interface

These studies develop a methodology to form supported phospholipid bilayers at an electrode/solution interface that models biological membrane systems. Two kinds of electrode were used, a planar gold electrode and a microporous aluminium oxide electrode on which octadecanethiol or octadecyltrichlorosilane was self-assembled. The supported lipidic structures were produced by transfer of a phospholipid monolayer by the Langmuir—Blodgett technique or by direct fusion of phospholipid vesicles. Ubiquinone was introduced into the lipidic structures during their formation; electrochemical measurements demonstrated the mobility of ubiquinone along the plane of the bilayer. A membrane enzyme, pyruvate oxidase from E. coli, was successfully incorporated into this artificial bilayer and was found to be able to exchange electrons with ubiquinone present in the bilayer.     

Biomimetic Dissolution: A Tool to Predict Amorphous Solid Dispersion Performance

The presented study describes the development of a membrane permeation non-sink dissolution method that can provide analysis of complete drug speciation and emulate the in vivo performance of poorly water-soluble Biopharmaceutical Classification System class II compounds. The designed membrane permeation methodology permits evaluation of free/dissolved/unbound drug from amorphous solid dispersion formulations with the use of a two-cell apparatus, biorelevant dissolution media, and a biomimetic polymer membrane. It offers insight into oral drug dissolution, permeation, and absorption. Amorphous solid dispersions of felodipine were prepared by hot melt extrusion and spray drying techniques and evaluated for in vitro performance. Prior to ranking performance of extruded and spray-dried felodipine solid dispersions, optimization of the dissolution methodology was performed for parameters such as agitation rate, membrane type, and membrane pore size. The particle size and zeta potential were analyzed during dissolution experiments to understand drug/polymer speciation and supersaturation sustainment of felodipine solid dispersions. Bland-Altman analysis was performed to measure the agreement or equivalence between dissolution profiles acquired using polymer membranes and porcine intestines and to establish the biomimetic nature of the treated polymer membranes. The utility of the membrane permeation dissolution methodology is seen during the evaluation of felodipine solid dispersions produced by spray drying and hot melt extrusion. The membrane permeation dissolution methodology can suggest formulation performance and be employed as a screening tool for selection of candidates to move forward to pharmacokinetic studies. Furthermore, the presented model is a cost-effective technique.     

The nitrite transport protein NirC from Salmonella typhimurium is a nitrite/proton antiporter

In anaerobically grown bacteria, transport of nitrite is catalyzed by an integral membrane protein of the form ate-nitrite transporter family, NirC, which in Salmonella typhimurium plays a critical role in intracellular virulence. We present a functional characterization of the S. typhimurium nitrite transporter StmNirC in native membrane vesicles as well as purified and reconstituted into proteoliposomes. Using an electrophysiological technique based on solid supported membranes, we show nitrite induced translocation of negative charges into proteoliposomes reconstituted with purified StmNirC. These data demonstrate the electrogenicity of StmNirC and its substrate specificity for nitrite. Monitoring changes in ΔpH on everted membrane vesicles containing overexpressed StmNirC using acridine orange as a pH indicator we demonstrate that StmNirC acts as a secondary active transporter. It promotes low affinity transport of nitrite coupled to H(+) antiport with a pH independent profile in the pH range from 6 to 8. In addition to nitrite also nitrate is transported by StmNirC, but with reduced flux and complete absence of proton antiport activity. Taken together, these data suggest a bispecific anion selectivity of StmNirC with an ion specific transport mode. This may play a role in regulating nitrite transport under physiological conditions.     

Modulation of microvascular growth and morphogenesis by reconstituted basement membrane gel in three-dimensional cultures of rat aorta: A comparative study of angiogenesis in Matrigel,collagen, fibrin,and plasma clot

Summary Rings of rat aorta cultured in Matrigel, a reconstituted gel composed of basement membrane molecules, gave rise to three-dimensional networks composed of solid cellular cords and occasional microvessels with slitlike lumina. Immunohistochemical and ultrastructural studies showed that the solid cords were composed of endothelial sprouts surrounded by nonendothelial mesenchymal cells. The angiogenic response of the aortic rings in Matrigel was compared to that obtained in interstitial collagen, fibrin, or plasma clot. Morphometric analysis demonstrated that the mean luminal area of the microvascular sprouts and channels was significantly smaller in Matrigel than in collagen, fibrin, or plasma clot. The percentage of patent microvessels in Matrigel was also markedly reduced. Autoradiographic studies of³H-thymidine-labeled cultures showed reduced DNA synthesis by developing microvessels in Matrigel. The overall number of solid endothelial cords and microvessels was lower in Matrigel than in fibrin or plasma clot. A mixed cell population isolated from Matrigel cultures formed a monolayer in collagen or fibrin-coated dishes but rapidly reorganized into a polygonal network when plated on Matrigel. The observation that gels composed of basement membrane molecules modulate the canalization, proliferation, and organization into networks of vasoformative endothelial cells in three-dimensional cultures supports the hypothesis that the basement membrane is a potent regulator of microvascular growth and morphogenesis. This work was supported by grants from the W. W. Smith Charitable Trust and grants CA14137 and HL43392 from the National Institutes of Health, Bethesda, MD.     

A new method for routine isolation of oral treponemes using U-tubes and pectin medium

Determination of the composition of the oral microflora has traditionally been based on cultivation. Treponemes are prevalent in many oral infections but, unfortunately, are not regularly cultured. In this study a new method was established for routine isolation of oral treponemes from clinical samples. Bacterial samples from 47 periodontal pockets and 4 endodontic infections were incubated anaerobically under nitrogen atmosphere at 37 degrees C in U-tubes containing pectin medium. In the U-tube a 'bacterial sample side' and a 'sterile medium side' were established on separate sides of a membrane filter and an agar plug. Using this method we were able to isolate viable treponemes from all bacterial samples. This was in contrast to previously established methods such as the agar dilution technique, the technique involving the membrane filter placed on the surface of solid agar media and the well in agar plate technique. We believe that the 'U-tube method' is a valuable supplement to previously described techniques in routine isolation of treponemes from clinical samples.     

In situ synthesis of molecularly imprinted nanoparticles in porous support membranes using high-viscosity polymerization solvents

There is a growing need in membrane separations for novel membrane materials providing selective retention. Molecularly imprinted polymers (MIPs) are promising candidates for membrane functionalization. In this work, a novel approach is described to prepare composite membrane adsorbers incorporating molecularly imprinted microparticles or nanoparticles into commercially available macroporous filtration membranes. The polymerization is carried out in highly viscous polymerization solvents, and the particles are formed in situ in the pores of the support membrane. MIP particle composite membranes selective for terbutylazine were prepared and characterized by scanning electron microscopy and N? porosimetry. By varying the polymerization solvent microparticles or nanoparticles with diameters ranging from several hundred nanometers to 1 μm could be embedded into the support. The permeability of the membranes was in the range of 1000 to 20,000 Lm?2 hr?1 bar?1. The imprinted composite membranes showed high MIP/NIP (nonimprinted polymer) selectivity for the template in organic media both in equilibrium-rebinding measurements and in filtration experiments. The solid phase extraction of a mixture of the template, its analogs, and a nonrelated compound demonstrated MIP/NIP selectivity and substance selectivity of the new molecularly imprinted membrane. The synthesis technique offers a potential for the cost-effective production of selective membrane adsorbers with high capacity and high throughput.     

Restoring full biological activity to the isolated ectodomain of an integral membrane protein

Integral membrane proteins, which include many cellular effector proteins and drug targets, can be difficult to produce, purify, and manipulate. Although the isolated ectodomains of many membrane proteins can be expressed as water soluble proteins, biological activity is frequently lost when these proteins are released from the membrane surface. An example is tissue factor, the integral membrane protein that triggers the blood clotting cascade and for which membrane anchoring is essential. Its isolated ectodomain (soluble tissue factor) can be expressed with high yield in bacteria but is orders of magnitude less active than the intact, membrane-anchored protein. We now report full restoration of biological activity to the isolated tissue factor ectodomain via the engineering of a hexahistidine tag onto its C-terminus and its use in combination with membrane bilayers containing nickel-chelating lipids. When soluble tissue factor was tethered to the membrane surface via such metal-chelating lipids, it bound factor VIIa with the same high affinity as wild-type tissue factor, and the resulting factor VIIa-tissue factor complexes supported factor X activation and factor VII autoactivation with essentially wild-type enzyme kinetic constants. Furthermore, when such bilayers were immobilized onto solid supports, they efficiently captured histidine-tagged soluble tissue factor directly from crude culture supernatants, with full biological activity, obviating the need for purification or laborious membrane reconstitution procedures. This strategy is rapid, efficient, scalable, and automatable and should be applicable to other integral membrane proteins, especially those with a single transmembrane domain. Applications include high-throughput screening of mutants or drugs, flow reactors, clinical assays, and point-of-care instrumentation.