Sequence of the loxP site determines the order of strand exchange by the Cre recombinase

Conservative site-specific recombinases of the integrase family carry out recombination via a Holliday intermediate. The Cre recombinase, a member of the integrase family, was previously shown to initiate recombination by cleaving and exchanging preferentially on the bottom strand of its loxP target sequence. We have confirmed this strand bias for an intermolecular recombination reaction that used wild-type loxP sites and Cre protein. We have examined the sequence determinants for this strand preference by selectively mutating the two asymmetric scissile base-pairs in the lox site (those immediately adjacent to the sites of cleavage by Cre). We found that the initial strand exchange occurs preferentially next to the scissile G residue. Resolution of the Holliday intermediate thus formed takes place preferentially next to the scissile A residue. Lys86, which contacts the scissile nucleotides in the Cre-lox crystal structures, was important for establishing the strand preference in the resolution of the loxP-Holliday intermediate, but not for the initiation of recombination between loxP sites.     

Cre induces an asymmetric DNA bend in its target loxP site

Cre initiates recombination by preferentially exchanging the bottom strands of the loxP site to form a Holliday intermediate, which is then resolved on the top strands. We previously found that the scissile AT and GC base pairs immediately 5' to the scissile phosphodiester bonds are critical in determining this order of strand exchange. We report here that the scissile base pairs also influence the Cre-induced DNA bends, the position of which correlates with the initial site of strand exchange. The binding of one Cre molecule to a loxP site induces a approximately 35 degrees asymmetric bend adjacent to the scissile GC base pair. The binding of two Cre molecules to a loxP site induces a approximately 55 degrees asymmetric bend near the center of the spacer region with a slight bias toward the scissile A. Lys-86, which contacts the scissile nucleotides, is important for establishing the bend near the scissile GC base pair when one Cre molecule is bound but has little role in positioning the bend when two Cre molecules are bound to a loxP site. We present a model relating the position of the Cre-induced bends to the order of strand exchange in the Cre-catalyzed recombination reaction.     

Determinants of product topology in a hybrid Cre-Tn3 resolvase site-specific recombination system

Many natural DNA site-specific recombination systems achieve directionality and/or selectivity by making recombinants with a specific DNA topology. This property requires that the DNA architecture of the synapse and the mechanism of strand exchange are both under strict control. Previously we reported that Tn3 resolvase-mediated synapsis of the accessory binding sites from the Tn3 recombination site res can impose topological selectivity on Cre/loxP recombination. Here, we show that the topology of these reactions is profoundly affected by subtle changes in the hybrid recombination site les. Reversing the orientation of loxP relative to the res accessory sequence, or adding 4 bp to the DNA between loxP and the accessory sequence, can switch between two-noded and four-noded catenane products. By analysing Holliday junction intermediates, we show that the innate bias in the order of strand exchanges at loxP is maintained despite the changes in topology. We conclude that a specific synaptic structure formed by resolvase and the res accessory sequences permits Cre to align the adjoining loxP sites in several distinct ways, and that resolvase-mediated intertwining of the accessory sequences may be less than has been assumed previously.     

Targeted integration of DNA using mutant lox sites in embryonic stem cells.

Site-directed DNA integration has been achieved by using a pair of mutant lox sites, a right element (RE) mutant lox site and a left element (LE) mutant lox site [Albertet al. (1995)Plant J., 7, 649-659], in mouse embryonic stem (ES) cells. We established ES cell lines carrying a single copy of the wild-type lox Por LE mutant lox site as a target and examined the frequency of site-specific integration of a targeting vector carrying a loxP or RE mutant lox site induced by Cre transient expression. Since our targeting vector contains a complete neo gene, random integrants can form colonies as in the case of a gene targeting event through homologous recombination. With our system, the frequency of site-specific integration via the mutant lox sites reached a maximum of 16%. In contrast, the wild-type loxP sites yielded very low frequencies (<0.5%) of site-specific integration events. This mutatedloxsystem will be useful for 'knock-in' integration of DNA in ES cells.     

Reversible dimer formation and stability of the anti-tumour single-chain Fv antibody MFE-23 by neutron scattering,analytical ultracentrifugation,and NMR and FT-IR spectroscopy

Cre recombinase uses two pairs of sequential cleavage and religation reactions to exchange homologous DNA strands between 34 base-pair (bp) LoxP recognition sequences. In the oligomeric recombination complex, a switch between "cleaving" and "non-cleaving" subunit conformations regulates the number, order, and regio-specificity of the strand exchanges. However, the particular sequence of events has been in question. From analysis of strand composition of the Holliday junction (HJ) intermediate, we determined that Cre initiates recombination of LoxP by cleaving the upper strand on the left arm. Cre preferred to react with the left arm of a LoxP suicide substrate, but at a similar rate to the right arm, indicating that the first strand to be exchanged is selected prior to cleavage. We propose that during complex assembly the cleaving subunit preferentially associates with the LoxP left arm, directing the first strand exchange to that side. In addition, this biased assembly would enforce productive orientation of LoxP sites in the recombination synapses. A novel Cre-HJ complex structure in which LoxP was oriented with the left arm bound by the cleaving Cre subunit suggested a physical basis for the strand exchange order. Lys86 and Lys201 interact with the left arm scissile adenine base differently than in structures that have a scissile guanine. These interactions are associated with positioning the 198-208 loop, a structural component of the conformational switch, in a configuration that is specific to the cleaving conformation. Our results suggest that strand exchange order and site alignment are regulated by an "induced fit" mechanism in which the cleaving conformation is selectively stabilized through protein-DNA interactions with the scissile base on the strand that is cleaved first.     

Reversed DNA strand cleavage specificity in initiation of Cre-LoxP recombination induced by the His289Ala active-site substitution

During the first steps of site-specific recombination, Cre protein cleaves and religates a specific homologous pair of LoxP strands to form a Holliday junction (HJ) intermediate. The HJ is resolved into recombination products through exchange of the second homologous strand pair. CreH289A, containing a His to Ala substitution in the conserved R-H-R catalytic motif, has a 150-fold reduced recombination rate and accumulates HJs. However, to produce these HJs, CreH289A exchanges the opposite set of strands compared to wild-type Cre (CreWT). To investigate how CreH289A and CreWT impose strand exchange order, we characterized their reactivities and strand cleavage preferences toward LoxP duplex and HJ substrates containing 8bp spacer substitutions. Remarkably, CreH289A had different and often opposite strand exchange preferences compared to CreWT with nearly all substrates. CreH289N was much less perturbed, implying that overall recombination rate and strand exchange depend more on His289 hydrogen bonding capability than on its acid/base properties. LoxP substitutions immediately 5' (S1 nucleotide) or 3' (S1' nucleotide) of the scissile phosphate had large effects on substrate utilization and strand exchange order. S1' substitutions, designed to alter base-unstacking events concomitant with Cre-induced LoxP bending, caused HJ accumulation and dramatically inverted the cleavage preferences. That pre-formed HJs were resolved via either strand in vitro suggests that inhibition of the "conformational switch" isomerization required to trigger the second strand exchange accounts for the observed HJ accumulation. Rather than reflecting CreWT behavior, CreH289A accumulates HJs of opposite polarity through a combination of its unique cleavage specificity and an HJ isomerization defect. The overall implication is that cleavage specificity is mediated by sequence-dependent DNA deformations that influence the scissile phosphate positioning and reactivity. A role of His289 may be to selectively stabilize the "activated" phosphate conformation in order to promote cleavage.     

New multiple-deletion method for the Corynebacterium glutamicum genome, using a mutant lox sequence

Due to the difficulty of multiple deletions using the Cre/loxP system, a simple, markerless multiple-deletion method based on a Cre/mutant lox system combining a right-element (RE) mutant lox site with a left-element (LE) mutant lox site was employed for large-scale genome rearrangements in Corynebacterium glutamicum. Eight distinct genomic regions that had been identified previously by comparative analysis of C. glutamicum R and C. glutamicum 13032 genomes were targeted for deletion. By homologous recombination, LE and RE mutant lox sites were integrated at each end of a target region. Highly efficient and accurate deletions between the two chromosomal mutant lox sites in the presence of Cre recombinase were realized. A deletion mutant lacking 190 kb of chromosomal regions, encoding a total of 188 open reading frames (ORFs), was obtained. These deletions represent the largest genomic excisions in C. glutamicum reported to date. Despite the loss of numerous predicted ORFs, the mutant exhibited normal growth under standard laboratory conditions. The Cre/loxP system using a pair of mutant lox sites provides a new, efficient genome rearrangement technique for C. glutamicum. It should facilitate the understanding of genome functions of microorganisms.     

Bacteriophage P1 Cre-loxP site-specific recombination. Site-specific DNA topoisomerase activity of the Cre recombination protein

Site-specific recombination in bacteriophage P1 occurs between two loxP sites in the presence of the Cre recombination protein. The structure of the 34-base pair loxP site consists of two 13-base pair inverted repeats separated by an 8-base pair spacer region. A mutation in the loxP site has been constructed which deletes one of the internal bases of the spacer region at the axis of dyad symmetry. This mutant loxP site shows a 10-fold reduction in recombination activity with a wild-type site both in vivo and in vitro. This low level of intramolecular recombination between a wild-type loxP site and the mutant loxP501 site is observed in vitro only when the DNA substrate is supercoiled. The majority of the supercoiled substrate is relaxed by the Cre protein, and on longer incubations, single-stranded nicks accumulate in the DNA. We have determined that these nicks occur in both the wild-type and the mutant sites. The positions of these nicks correspond to the positions of cleavage found during recombination of two wild-type sites, suggesting that the Cre protein is attempting to carry out recombination with the mutant site but most of the time this reaction is abortive. We have determined that the Cre protein relaxes a supercoiled topoisomer of a DNA substrate containing one wild-type site and one mutant site to yield a distribution of topoisomers whose linking numbers differ by steps of one, indicating that Cre can act as a type I topoisomerase.     

Unidirectional Cre-mediated genetic inversion in mice using the mutant loxP pair lox66/lox71

The Cre/loxP recombination system is a commonly used tool to alter the mouse genome in a conditional manner by deletion or inversion of loxP-flanked DNA segments. While Cre-mediated deletion is essentially unidirectional, inversion is reversible and therefore does not allow the stable alteration of gene function in cells that constitutively express Cre. Site-directed mutagenesis yielded a pair of asymmetric loxP sites (lox66 and lox71) that display a favorable forward reaction equilibrium. Here, we demonstrate that lox66/lox71 mediates efficient and predominantly unidirectional inversion of a switch substrate targeted to the mouse genome in combination with either inducible or cell type-specific cre-transgenes in vivo.     

Effect of DNA structure and nucleotide sequence on Holliday junction resolution by a Saccharomyces cerevisiae endonuclease

Previous studies have demonstrated that mitotic Saccharomyces cerevisiae cells contain an endonuclease that cleaves Holliday junctions. In this paper, the cleavage of a number of model branched substrates has been characterized in detail. Three-armed Y-branched molecules were not substrates for the enzyme. Holliday junction substrates constructed from wild-type lambda att sites were resolved in a concerted reaction by paired single-strand breaks that contained 5'-phosphate and 3'-hydroxyl groups and were often symmetrically related. Holliday junctions were also constructed using DNAs derived from lambda safG and safT mutants to alter the nucleotide sequence immediately flanking the cross-strand exchange. These one to six base-pair changes in nucleotide sequence were observed to have dramatic effects on both the directionality and rate of resolution. More than 90% of wild-type junctions were cleaved in only one direction, while Holliday junctions composed of safT DNA were cleaved equally in both possible directions. Hybrid junctions composed of half wild-type DNA and half safG DNA were cleaved in the same orientation as the wild-type junction but at one-seventh of the rate, while junctions constructed completely from safG DNA were not cleaved at all. The cleavage sites were mapped at the nucleotide level and the locations of the paired nicks made by the endonuclease were also found to be affected by the sequence of the substrates and in such a way as to account for the directionality of cleavage. These results have important consequences for the interpretation of genetic experiments, since they provide biochemical evidence that some of the non-random nature of genetic recombination might be due to non-randomly distributed resolution processes.     

Altered directionality in the Cre-LoxP site-specific recombination pathway

The site-specific recombinase Cre must employ control mechanisms to impose directionality on recombination. When two recombination sites (locus of crossing over in phage P1, loxP) are placed as direct repeats on the same DNA molecule, collision between loxP-bound Cre dimers leads to excision of intervening DNA. If two sites are placed as inverted repeats, the intervening segment is flipped around. Cre catalyzes these reactions in the absence of protein co-factors. Current models suggest that directionality is controlled at two steps in the recombination pathway: the juxtaposition of loxP sites and the single-strand-transfer reactions within the synaptic complex. Here, we show that in Escherichia coli strain 294-Cre, directionality for recombination is altered when the expression of Cre is increased. This leads to deletion instead of inversion on substrates carrying two loxP sites as inverted repeats. The nucleotide sequence composition of loxP sites remaining in aberrant products indicates that site alignment and/or DNA strand transfer in the in vivo Cre-loxP recombination pathway are not always tightly controlled.     

Alterations in the directionality of lambda site-specific recombination catalyzed by mutant integrases in vivo.

Phage lambda integrative and excisive recombination normally proceeds by a pair of sequential strand exchanges. During the first exchange reaction, the "top" strand in each recombination site is cleaved, exchanged, and religated generating a Holliday junction intermediate. This intermediate DNA structure is resolved through a pair of reciprocal "bottom" strand exchanges, leading to recombinant products. The strict co-ordination of exchange reactions ensures religation between correct partner strands only. Here we show that the directionality of recombination is altered in vivo by two mutant integrases, Int-h (E174 K) and a double mutant Int-h/218 (E174 K/E218 K). This change in directionality leads to deletion instead of inversion on substrates that carry inverted attachment sites and, depending on the pair of target sites employed, requires the presence or absence of integration host factor. Neither Fis nor Xis is involved in deletion. Sequence analyses of deletion products reveal that the newly generated hybrid attachment site exhibits a reversed genetic polarity. We demonstrate that only one of two possible hybrid site configurations is generated and discuss two pathways leading to deletion. In the first, deletion results from a wrong alignment of the two recombination sites within the synaptic complex. In the second pathway, the unco-ordinated cleavage by the mutant integrases of all four DNA strands present in a conventional Holliday junction intermediate leads to two double-stranded breaks, whereby the subsequent rejoining between "wrong" partner strands appears restricted to only two strands.     

Identification of cryptic lox sites in the yeast genome by selection for Cre-mediated chromosome translocations that confer multiple drug resistance.

The Cre recombinase efficiently causes site-specific DNA recombination at loxP sites placed into the eukaryotic genome. Since the loxP site of phage P1 is 34 base-pairs in size, the natural occurrence of this exact sequence is unlikely in any eukaryotic genome. However, related sequences may exist in eukaryotic genomes that could recombine at low efficiency with an authentic loxP site. This work identifies such cryptic lox sites in the yeast genome using a positive selection procedure that allows the detection of events occurring at a frequency of less than 1 x 10(-7). The selection is based on the disruption/reconstruction of the yeast gene YGL022. Disruption of YGL022 confers multiple drug sensitivity. Recombination events at a loxP site 5' to the structural gene restore expression of YGL022 and result in a multiple drug resistant phenotype. These drug resistant mutants all display chromosomal rearrangements resulting from low-frequency Cre-mediated recombination with an endogenous cryptic lox site. Ten such sites have been found and they have been mapped physically to a number of different yeast chromosomes. Although the efficiency of Cre-mediated recombination between loxP and such endogenous sites is quite low, it may be possible to redesign recombination substrates to improve recombination efficiency. Because of the greater complexity of the human and mouse genomes compared with yeast, an analogous situation is likely to exist in these organisms. The availability of such sites would be quite useful in the development of alternative strategies for gene therapy and in the generation of transgenic animals.     

The Holliday junction intermediates of lambda integrative and excisive recombination respond differently to the bending proteins integration host factor and excisionase.

In lambda site-specific recombination, the integrative and excisive reactions proceed via two different Holliday junction intermediates, both of which are generated and resolved by a pair of sequentially ordered single strand exchanges. Factors affecting the directionality and efficiency of the second pair of strand exchanges were examined using artificial Holliday junctions (chi-forms). The integrative and excisive recombination intermediates respond differently to the accessory DNA bending proteins integration host factor and excisionase (Xis). These differences between the two recombination intermediates result from a different interaction pattern between proteins binding to the left (P arm) and right (P' arm) of the crossover region. The effect of Xis protein on the directionality of resolution, i.e. the choice of which strands are exchanged, is consistent with a role in promoting the second strand exchange during excision. Proteins binding to the left of the crossover region (P arm) primarily influence the directionality of resolution, while proteins binding to the right (P' arm) have a greater effect on the overall efficiency of resolution. Together, the effect of proteins binding to sites in the P and P' arms is to greatly enhance resolution of the two different Holliday intermediates and to favor resolution in the 'forward' direction for both integrative and excisive recombination.     

Gene tagging and gene replacement using recombinase-mediated cassette exchange in Schizosaccharomyces pombe

Cre/lox site-specific recombination systems provide important tools for genetic manipulation. Here we present an efficient method for gene tagging and gene replacement using Cre recombinase-mediated cassette exchange (RMCE). The cassette consists of the S. pombe ura4(+) selectable marker flanked by a wild-type loxP site at one end and by a modified heterospecific lox site (loxM3) at the other. The cassette is stable because the flanking lox sites cannot recombine with each other. Following integration of the cassette at the chosen chromosomal locus, exchange is achieved by introducing a Cre-expression plasmid containing an equivalent cassette containing the required tag or gene sequence. Recombinants are selected by uracil prototrophy using the reagent 5-fluoroorotic acid (5-FOA). The cassette exchange system provides for repetitive integrations at the same locus, allowing different protein tags or gene sequences to be integrated quickly and efficiently. We have established a range of reagents and verified utility by C-terminally tagging the S. pombe rad4 and swi1 genes with yEGFP and the yEGFP derivatives yECFP and yECitrine and by transferring the coding sequence for both genes.     

Identification of Cre residues involved in synapsis,isomerization, and catalysis

The Cre protein of bacteriophage P1 is a tyrosine recombinase and catalyzes recombination via formation of a covalent protein-DNA complex and a Holliday junction intermediate. Several co-crystal structures of Cre bound to its target lox site have provided novel insights into its biochemical activities. We have used these structures to guide the mutagenesis of several Cre residues that contact the lox spacer region and/or are involved in intersubunit protein-protein interactions. None of the mutant proteins had significant defects in DNA binding, DNA bending, or strand-specific initiation of recombination. We have identified novel functions of several amino acids that are involved in three aspects of the Cre reaction. 1) Single mutation of several NH2-terminal basic residues that contact the spacer region of loxP caused the accumulation of Holliday junction (HJ) intermediates but only a modest impairment of recombination. These residues may be involved in the isomerization of the Holliday intermediate. 2) We identified three new residues (Arg-118, Lys-122, and Glu-129) that are involved in synapsis. Cre R118A, K122A, and E129Q were catalytically competent. 3) Mutations E129R, Q133H, and K201A inactivated catalysis by the protein. The function of these Cre residues in recombination is discussed.     

Multiplex Cre/lox recombination permits selective site-specific DNA targeting to both a natural and an engineered site in the yeast genome.

Variant lox sites having an altered spacer region (heterospecific lox sites) are not proficient for Cre-mediated recombination with the canonical 34 bp loxP site, but can recombine with each other. By placing different heterospecific lox sites at different genomic locations, Cre can catalyze independent DNA recombination events at multiple loci in the same cell without concern that unwanted inter-locus recombination events will be generated. Such heterospecific lox sites also allow Cre to specifically target efficient integration of exogenous DNA to endogenous lox-like sequences that naturally occur in the genome. Specific targeting occurs only with a DNA vector carrying a heterospecific lox site in which the spacer region has been redesigned to match the 'spacer' region of the targeted chromosomal element. Moreover, in cells expressing a catalytically active Cre recombinase, naturally occurring lox-like sequences can exhibit almost 20% mitotic recombination. Thus, in the same cell, heterospecific lox sites can be used independently at multiple loci for integration, for deletion and for enhanced mitotic recombination, thereby increasing the repertoire of genomic manipulations catalyzed by the Cre recombinase.     

The promiscuity of heterospecific lox sites increases dramatically in the presence of palindromic DNA

Heterospecific lox sites are mutated lox sites that in the presence of Cre recombinase recombine with themselves but not or much less with wildtype loxP. We here show that in Escherichia coli both lox511 and lox2272 sites become highly promiscuous with respect to loxP when in the presence of Cre one of the recombination partners is present in a larger stretch of an inverted repeat of non-lox DNA. In such a palindromic DNA configuration, also the occurrence of other DNA repeat-mediated recombination events is somewhat increased in the presence of Cre. The results indicate that in recombinase mediated cassette exchange or other double lox applications based on the exclusivity of heterospecific lox sites, or in research combining Cre-lox approaches with hairpin RNA for gene silencing, the presence of duplicated DNA around lox sites has to be taken into account. It is proposed that the presence of palindromic non-lox DNA interferes with the homology search of the Cre enzyme prior to the actual recombination event.     

Mechanism of strand cleavage and exchange in the Cre-lox site-specific recombination system

The bacteriophage P1 recombinase Cre mediates site-specific recombination between loxP sites. The loxP site consists of two 13 base-pair inverted repeats separated by an eight base-pair spacer region. When DNA containing the loxP site is incubated with Cre, specific cleavages occur within the spacer region, creating a six base-pair staggered cut. The cuts are centered on the axis of dyad symmetry of the loxP site, resulting in a 5' protruding terminus: 5' A decreases T-G-T-A-T-G C 3' T A-C-A-T-A-C increases G. At the point of cleavage, Cre becomes covalently attached to a 3' PO4, and produces a free 5' OH. A series of experiments were carried out in which a radioactively labeled loxP site is recombined with an unlabeled loxP site to locate the point at which strand exchange takes place during recombination. The points of strand exchange coincide with the sites at which Cre cleavage of the DNA backbone had been detected.     

The isomeric preference of Holliday junctions influences resolution bias by lambda integrase.

Lambda site-specific recombination proceeds by a pair of sequential strand exchanges that first generate and then resolve a Holliday junction intermediate. A family of synthetic Holliday junctions with the branch point constrained to the center of the 7 bp overlap region was used to show that resolution of the top strands and resolution of the bottom strands are symmetrical but stereochemically distinct processes. Lambda integrase is sensitive to isomeric structure, preferentially resolving the pair of strands that are crossed in the protein-free Holliday junction. At the branch point of stacked immobile Holliday junctions, the number of purines is preferentially maximized in the crossed (versus continuous) strands if there is an inequality of purines between strands of opposite polarity. This stacking preference was used to anticipate the resolution bias of freely mobile junctions and thereby to reinforce the conclusions with monomobile junctions. The results provide a strong indication that in the complete recombination reaction a restacking of helices occurs between the top and bottom strand exchanges.