Synthesis and in vitro evaluation of biotinylated RG108: a high affinity compound for studying binding interactions with human DNA methyltransferases

Small-molecule inhibitors of DNA methyltransferases such as RG108 represent promising candidates for cancer drug development. We report the synthesis and in vitro analysis of a biotinylated RG108 conjugate, 2-(1,3-dioxo-1,3-dihydro-isoindol-2-yl)-3-(5-[3-[5-(2-oxo-hexahydro-thieno[3,4-d]imidazol-4-yl)pentanoylamino]propoxy]-1H-indol-3-yl)propionic acid (bio-RG108), for the evaluation of interactions with DNA methyltransferase enzymes. The structural design of the chemically modified inhibitor was aided by molecular modeling, which suggested the possibility for extensive chemical modifications at the 5-position of the tryptophan moiety in RG108. The inhibitory activity of the corresponding derivative was confirmed in a cell-free biochemical assay, where bio-RG108 showed an undiminished inhibition of DNA methyltransferase activity (IC50 = 40 nM). Bio-RG108 therefore represents a suitable bioconjugate for the elucidation of inhibitory mechanisms and for the affinity purification of RG108-associated proteins.     

Direct electrochemical sensor for fast reagent-free DNA detection

A novel reagentless direct electrochemical DNA sensor has been developed using ultrathin films of the conducting polymer polypyrrole doped with an oligonucleotide probe. Our goal was to develop a prototype electrochemical DNA sensor for detection of a biowarfare pathogen, variola major virus. The sensor has been optimized for higher specificity and sensitivity. It was possible to detect 1.6 fmol of complementary oligonucleotide target in 0.1 ml in seconds by using chronoamperometry. The sensitivity of the developed sensor is comparable to indirect electrochemical DNA sensors, which use electrochemical labels and reagent-intensive amplification. The developed sensing electrode is reusable, highly stable and suitable for storage in solution or in dry state.     

Electrochemically directed synthesis of oligonucleotides for DNA microarray fabrication

We demonstrate a new method for making oligonucleotide microarrays by synthesis in situ. The method uses conventional DNA synthesis chemistry with an electrochemical deblocking step. Acid is delivered to specific regions on a glass slide, thus allowing nucleotide addition only at chosen sites. The acid is produced by electrochemical oxidation controlled by an array of independent microelectrodes. Deblocking is complete in a few seconds, when competing side-product reactions are minimal. We demonstrate the successful synthesis of 17mers and discrimination of single base pair mismatched hybrids. Features generated in this study are 40 μm wide, with sharply defined edges. The synthetic technique may be applicable to fabrication of other molecular arrays.     

Properties of the 3' to 5' exonuclease associated with calf DNA polymerase delta

The 3' to 5' exonuclease of calf thymus DNA polymerase delta has properties expected of a proofreading nuclease. It digests either single-stranded DNA or the single-stranded nucleotides of a mismatched primer on a DNA template by a nonprocessive mechanism. The distribution of oligonucleotide products suggests that a significant portion of the enzyme dissociates after the removal of one nucleotide. This mechanism is expected if the substrate in vivo is an incorrect nucleotide added by the polymerase. Digestion of single-stranded DNA does not proceed to completion, producing final products six to seven nucleotides long. Digestion of a long mismatched terminus accelerates when the mismatched region is reduced to less than six nucleotides. At the point of complementation, the digestion rate is greatly reduced. These results suggest that short mismatched regions are a preferred substrate. The use of a mismatched primer-template analogue, lacking the template single strand, greatly lowers digestion efficiency at the single-stranded 3'-terminus, suggesting that the template strand is important for substrate recognition. When oligonucleotides were examined for effectiveness as exonuclease inhibitors, (dG)8 was found to be the most potent inhibitor of single-stranded DNA digestion. (dG)8 was less effective at inhibiting digestion of mismatched primer termini, again suggesting that this DNA is a preferred substrate. Overall, these results indicate that the exonuclease of DNA polymerase delta efficiently removes short mismatched DNA, a structure formed from misincorporation during DNA synthesis.     

A monolithic silicon based integrated signal generation and detection system for monitoring DNA hybridisation

The aim of this work was to develop an integrated solution to DNA hybridisation monitoring for diagnostics on a monolithic silicon platform. A fabrication process was developed incorporating a gold initiation electrode patterned directly onto a PIN photodiode detector. Patterned interdigitated type electrodes exhibited the smallest reduction in photodiode sensitivity, therefore these were chosen as the ECL initiator design. A novel DNA hybridisation assay was developed based on the displacement of a partially mismatched complementary strand by a perfectly matched labelled complementary strand. Pre-hybridised thiolated oligonucleotide and unlabelled 25% mismatched oligonucleotide were assembled on the gold initiation electrode. On addition of the labelled perfectly complementary oligonucleotide, the mismatched strands were displaced and a signal was generated. The sensitivity of the photodiode to light emitted at 620 nm, the ruthenium emission wavelength, was determined and subsequently, the diode current response to light generated by flow addition of ruthenium solution was found to be measurable to a concentration of 10 fM. Pre-hybridised duplex DNA, consisting of thiolated oligonucleotide and ruthenium labelled complementary oligonucleotide, was assembled on the gold initiation electrode. The difference between the current measured during flow of buffer and the ECL co-reactant TPA was three orders of magnitude, indicating that DNA assembled on the surface comprised sufficient ruthenium to generate a measurable signal. Finally, the displacement of unlabelled partial mismatch oligonucleotide from the sensor surface was monitored on addition of the ruthenium labelled perfectly complementary oligonucleotide in TPA flow and the measured photodiode current response was up to 50 times greater.     

Bis-pyrene-labeled molecular beacon: a monomer-excimer switching probe for the detection of DNA base alteration

A new bis-pyrene-labeled oligonucleotide probe (BP-probe) has been designed for the detection of a single base mismatch in single strand (ss) DNA as a target. The sequence of BP-probe was chosen to form stem-loop structure similar to a molecular beacon (MB-probe), yielding bis-pyrene-labeled molecular beacon (BP-MB-probe). Partially double stranded (ds) BP-MB-probes were prepared by complexation with oligonucleotides whose sequences are complementary to the loop segment but not to the stem and exchangeable with the target DNA. The partially ds BP-MB-probes were shown to exhibit monomer fluorescence as major fluorescence, while the ss BP-MB-probe in the stem-loop form displays strong excimer fluorescence. The strand exchange reactions between partially ds BP-MB-probe and target ss DNA in the presence of cationic comb-type copolymer as a catalyst were monitored by the excimer fluorescence changes. The existence of a mismatched base can be determined by the slower PASE rates compared with fully matched DNA.     

Oligonucleotide probes applied for sensitive enzyme-amplified electrochemical assay of mercury(II) ions

We developed a novel electrochemical sensor for Hg(2+) detection using two mercury-specific oligonucleotide probes and streptavidin-horseradish peroxidase (HRP) enzymatic signal amplification. The two mercury-specific oligonucleotide probes comprised a thiolated capture probe and a biotinated signal probe. The thiolated capture probe was immobilized on a gold electrode. In the presence of Hg(2+), the thymine-Hg(2+)-thymine (T-Hg(2+)-T) interaction between the mismatched T-T base pairs directed the biotinated signal probe hybridizing to the capture probe and yielded a biotin-functioned electrode surface. HRP was then immobilized on the biotin-modified substrate via biotin-streptavidin interaction. The immobilized HRP catalyzed the oxidation of hydroquinone (H(2)Q) to benzoquinone (BQ) by hydrogen peroxide (H(2)O(2)) and the generated BQ was further electrochemically reduced at the modified gold electrode, producing a readout signal for quantitative detection of Hg(2+). The results showed that the enzyme-amplified electrochemical sensor system was highly sensitive to Hg(2+) in the concentration of 0.5 nM to 1 μM with a detection limit of 0.3 nM, and it also demonstrated excellent selectivity against other interferential metal ions.     

Extension of the range of DNA sequences available for triple helix formation: stabilization of mismatched triplexes by acridine-containing oligonucleotides.

Triple helix formation usually requires an oligopyrimidine*oligopurine sequence in the target DNA. A triple helix is destabilized when the oligopyrimidine*oligopurine target contains one (or two) purine*pyrimidine base pair inversion(s). Such an imperfect target sequence can be recognized by a third strand oligonucleotide containing an internally incorporated acridine intercalator facing the inverted purine*pyrimidine base pair(s). The loss of triplex stability due to the mismatch is partially overcome. The stability of triplexes formed at perfect and imperfect target sequences was investigated by UV thermal denaturation experiments. The stabilization provided by an internally incorporated acridine third strand oligonucleotide depends on the sequences flanking the inverted base pair. For triplexes containing a single mismatch the highest stabilization is observed for an acridine or a propanediol tethered to an acridine on its 3'-side facing an inverted A*T base pair and for a cytosine with an acridine incorporated to its 3'-side or a guanine with an acridine at its 5'-side facing an inverted G*C base pair. Fluorescence studies provided evidence that the acridine was intercalated into the triplex. The target sequences containing a double base pair inversion which form very unstable triplexes can still be recognized by oligonucleotides provided they contain an appropriately incorporated acridine facing the double mismatch sites. Selectivity for an A*T base pair inversion was observed with an oligonucleotide containing an acridine incorporated at the mismatched site when this site is flanked by two T*A*T base triplets. These results show that the range of DNA base sequences available for triplex formation can be extended by using oligonucleotide intercalator conjugates.     

Evaluation of 4,5,6,7-tetrahalogeno-1H-isoindole-1,3(2H)-diones as inhibitors of human protein kinase CK2

Protein kinase CK2 (Casein Kinase 2) is an extremely pleiotropic Ser/Thr kinase with high constitutive activity. The observation of CK2 deregulations in various pathological processes suggests that CK2 inhibitors may have a therapeutic value, particularly as anti-neoplastic and antiviral drugs. Here, we present the 4,5,6,7-tetrahalogeno-1H-isoindole-1,3(2H)-diones as a novel potent class of CK2 inhibitors. We identified this class of inhibitors by high-throughput docking of a compound collection in the ATP-binding site of human CK2. The most active compounds are 2-(4,5,6,7-tetraiodo-1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)propanoic acid and 2-(4,5,6,7-tetraiodo-1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)acetic acid with IC(50) values of 0.15 microM and 0.3 microM, respectively. These inhibitors are ATP-competitive and they only minimally inhibit the activities of protein kinases DYRK1a, MSK1, GSK3 and CDK5. Binding modes for the most active inhibitors are proposed.     

Phototriggered formation and repair of DNA containing a site-specific single strand break of the type produced by ionizing radiation or AP lyase activity

DNA strand breaks are produced by a variety of agents and processes such as ionizing radiation, xenobiotics, oxidative metabolism, and enzymatic processing of DNA base damage. One of the major types of strand breaks produced by these processes is a single nucleotide gap terminating in 5'- and 3'-phosphates. Previously, we had developed a method for sequence-specifically producing such phosphate-terminated strand breaks in an oligodeoxynucleotide by way of two photochemically activated (caged) building blocks placed in tandem. We now report the design and synthesis of a single caged building block consisting of 1,3-(2-nitrophenyl)-1,3-propanediol, for producing phosphate-terminated strand breaks, and its use producing such a break at a specific site in a double-stranded circular DNA vector. To produce the site-specific break in a duplex vector, a primer containing the caged single strand break was extended opposite the single strand form of a circular DNA vector followed by enzymatic ligation and purification. The single strand break could then be formed in quantitative yield by irradiation of the vector with 365 nm light. In contrast to a previous study, it was found that the strand break can be repaired by Escherichia coli DNA polymerase I and E. coli DNA ligase alone, though less efficiently than in the presence of the 3'-phosphate processing enzyme E. coli endonuclease IV. Repair in the absence of endonuclease IV could be attributed to hydrolysis of the 3'-phosphate in the presence of dNTP and to a lesser extent to exonucleolytic removal of the 3'-phosphate-bearing terminal nucleotide by way of the 3' --> 5' exonuclease activity of polymerase I. This work demonstrates that specialized 3'-end processing enzymes such as endonuclease IV or exonuclease III are not absolutely required for repair of phosphate-terminated gaps. In addition to preparing single strand breaks, the caged building block described should also be useful for preparing double strand breaks and multiply damaged sites that might otherwise be difficult to prepare by other methods due to their lability.     

A new strategy of discrimination of a point mutation by tandem of short oligonucleotides

A new strategy based on the use of cooperative tandems of short oligonucleotide derivatives (TSOD) has been proposed to discriminate a "right" DNA target from a target containing a single nucleotide discrepancy. Modification of a DNA target by oligodeoxyribonucleotide reagents was used to characterize their interaction in the perfect and mismatched complexes. It is possible to detect any nucleotide changes in the binding sites of the target with the short oligonucleotide reagent. In the presence of flanking di-3',5'-N-(2-hydroxyethyl)phenazinium derivatives of short oligonucleotides (effectors) the tetranucleotide alkylating reagent modifies DNA target efficiently and site-specifically only in the perfect complex and practically does not modify it in the mismatched complex. It has been shown that TSOD is much more sensitive tool for the detection of a point mutation in DNA as compared to a longer oligonucleotides.     

Enzymatic syntheses of DNA-silicas using DNA polymerase.

Oligothymidylic acids couple to an activated ester silica (N-hydroxysuccinimidyl-silica) only when they contain an added aminoalkyl group. Heteropolymeric oligomers containing other nucleotide bases were shown to also couple by way of the nucleotide base (adenine, cytosine, or guanine); however, when a heteropolymeric oligonucleotide also contains a 5'-aminoalkyl moiety, coupling by way of the latter is the favored reaction. When duplex hybrids of oligonucleotides are formed, the nucleotide bases are protected from chemical coupling. Coupling by way of nucleotide bases would be detrimental to some chromatography experiments. On the basis of these observations, two different procedures were developed to produce DNA-silicas in which a single strand of the DNA is coupled by only its 5'-terminus. In the first of these, the polymerase chain reaction was used with a 5'-aminoalkyl primer to make a duplex DNA with one strand containing the 5'-aminoalkyl group and the duplex DNA is then coupled to the activated ester silica. This yielded a silica containing about 0.17 nmol of a 242-mer per gram silica which bound only probes specific for the coupled strand. In the other procedure, a template DNA strand was poly(A) tailed and hybridized to (dT)18-silica. DNA polymerase I (Klenow large fragments) was then used to copy the template-specified sequence directly onto the 3'-terminus of the (dT)18. This procedure yielded about 1.2 to 2.7 nmol DNA copied/g of silica of a specific 21-mer sequence. The DNA-silica produced selectively hybridized only with complementary sequences and not with DNA lacking that sequence. Either of these procedures thus produces DNA-silicas from heteropolymeric DNA sequences with a predetermined, specific 5'-terminal site of attachment.     

Sensitive and specific detection of microRNAs by northern blot analysis using LNA-modified oligonucleotide probes

We describe here a new method for highly efficient detection of microRNAs by northern blot analysis using LNA (locked nucleic acid)-modified oligonucleotides. In order to exploit the improved hybridization properties of LNA with their target RNA molecules, we designed several LNA-modified oligonucleotide probes for detection of different microRNAs in animals and plants. By modifying DNA oligonucleotides with LNAs using a design, in which every third nucleotide position was substituted by LNA, we could use the probes in northern blot analysis employing standard end-labelling techniques and hybridization conditions. The sensitivity in detecting mature microRNAs by northern blots was increased by at least 10-fold compared to DNA probes, while simultaneously being highly specific, as demonstrated by the use of different single and double mismatched LNA probes. Besides being highly efficient as northern probes, the same LNA-modified oligonucleotide probes would also be useful for miRNA in situ hybridization and miRNA expression profiling by LNA oligonucleotide microarrays.     

Cylinder-shaped conducting polypyrrole for labelless electrochemical multidetection of DNA

A new multidetection biosensor has been developed using the electrochemical properties of cylinder-shaped conducting polypyrrole grown on miniaturized graphite electrodes. Our objective was to conceive a sensitive, labelless and real-time DNA sensor for biomedical diagnosis. In a first step, copolymers bearing both ferrocene redox markers and oligonucleotide probes were selectively electro-addressed on microchip electrodes. Then, the study of their voltammetric response upon the addition of DNA targets revealed that the hybridization was efficiently transduced through the variation of ferrocene oxidation intensity. Using this technique, a good selectivity between Human Immunodeficiency Virus and Hepatitis B Virus targets was obtained. It was indeed possible to directly follow the hybridization. Complementary DNA detection limit reached 100 pM (3 fmol in 30 microL), which represents a good performance for such a practical, labelless and real-time sensor.     

Design considerations for array CGH to oligonucleotide arrays.

BACKGROUND: Representational oligonucleotide microarray analysis has been developed for detection of single nucleotide polymorphisms and/or for genome copy number changes. In this process, the intensity of hybridization to oligonucleotides arrays is increased by hybridizing a polymerase chain reaction (PCR)-amplified representation of reduced genomic complexity. However, hybridization to some oligonucleotides is not sufficiently high to allow precise analysis of that portion of the genome. METHODS: In an effort to identify aspects of oligonucleotide hybridization affecting signal intensity, we explored the importance of the PCR product strand to which each oligonucleotide is homologous and the sequence of the array oligonucleotides. We accomplished this by hybridizing multiple PCR-amplified products to oligonucleotide arrays carrying two sense and two antisense 50-mer oligonucleotides for each PCR amplicon. RESULTS: In some cases, hybridization intensity depended more strongly on the PCR amplicon strand (i.e., sense vs. antisense) than on the detection oligonucleotide sequence. In other cases, the oligonucleotide sequence seemed to dominate. CONCLUSION: Oligonucleotide arrays for analysis of DNA copy number or for single nucleotide polymorphism content should be designed to carry probes to sense and antisense strands of each PCR amplicon to ensure sufficient hybridization and signal intensity.     

DNA hybridization in nanostructural molecular assemblies enables detection of gene mutations without a fluorescent probe

We have developed a simple single nucleotide polymorphisms (SNPs) analysis utilizing DNA hybridization in nanostructural molecular assemblies. The novel technique enables the detection of a single-base mismatch in a DNA sequence without a fluorescent probe. This report describes for the first time that DNA hybridization occurs in the nanostructural molecular assemblies (termed reverse micelles) formed in an organic medium. The restricted nanospace in the reverse micelles amplifies the differences in the hybridization rate between mismatched and perfectly matched DNA probes. For a model system, we hybridized a 20-mer based on the p53 gene sequence to 20-mer complementary oligonucleotides with various types of mismatches. Without any DNA labeling or electrochemical apparatus, we successfully detected the various oligonucleotide mismatches by simply measuring the UV absorbance at 260 nm.     

DNA hybridization sensor based on aurothiomalate electroactive label on glassy carbon electrodes

In this work, a gold complex is used as electroactive label for monitoring hybridization assays on glassy carbon electrodes. Ionic gold is bound to a 30-mer sequence of the SARS (severe acute respiratory syndrome) virus, responsible for the atypical pneumonia, using sodium aurothiomalate. In order to label this single strand, a mixture of sodium aurothiomalate and the strand is prepared. Then, it is incubated for 24 h at 37 degrees C and, finally, free gold is separated from the labeled strand by a dialysis against a 0.15M NaCl solution (pH 7.5). The DNA hybridization sensor is designed immobilizing the complementary probe on the pre-treated electrode surface and, then, the hybridization reaction takes place with the gold labeled strand. The electrochemical determination is based on the catalytic effect of electrodeposited gold on the reduction of silver ions. In non-stringent experimental conditions, a limit of detection of 15 fmol (30 microL) is obtained, and discrimination between a complementary oligonucleotide and a three-based mismatch complementary oligonucleotide is achieved. For the discrimination of a single-base mismatch, is needed to use stringent conditions (50% of formamide in the hybridization buffer).     

Detection of benzo(a)pyrene photodegradation products using DNA electrochemical sensors

The reactivity of photodegradation products of benzo(a)pyrene vs. DNA has been assessed using both genomic and oligonucleotide based DNA electrochemical sensors. The kinetic of a photooxidation reaction of benzo(a)pyrene (BaP) carried out in controlled conditions using a 6 W UV lamp peaked at 365 nm has been studied using LC with fluorimetric detection. Degradation of benzo(a)pyrene by both UV and UV/H(2)O(2) exhibited pseudo-first-order reaction kinetics with half-lives ranging from 3.0 to 9.8h depending on the pH and on the amount of H(2)O(2). The oxidation products of benzo(a)pyrene obtained in different conditions were tested on genomic ssDNA electrochemical sensors obtained via immobilisation of salmon testis ss-DNA on graphite screen-printed electrodes. Guanines oxidation signals obtained using chronopotentiometry were used to detect the interaction of the products with DNA. The dose-response curve obtained with benzo(a)pyrene incubated 24 h at pH 4.7 was different from that of the parent compound indicating a different type of interaction with DNA. A DNA hybridisation sensor was also assembled using a thiolated/biotynilated 24-mer oligonucleotide immobilised on a gold screen-printed electrode and avidin-alkaline phosphatase conjugate. A voltammetric detection of naphtol was used to detect the hybridisation reaction. A net inhibition of the hybridisation reaction was observed after incubation with benzo(a)pyrene oxidation products that was attributed to the formation of stable adducts with the guanines of the biotinylated strand. LC-MS-MS studies of the oxidation products confirmed the presence of chemical species potentially forming adducts with DNA. The data reported demonstrate that DNA electrochemical sensors have the potential to be used to monitor remediation processes and to assess the potential toxicity vs. DNA of chemicals forming stable DNA adducts.     

Site-directed mutagenesis using positive antibiotic selection

Various mutsgenesis protocols have been established that use the hybridization of a mismatched oligonucleotide to prime DNA synthesis on an M13 phagemid template. For efficient mutagenesis, all of these methods require a means to select for the mutant strand before or during amplification in anEscherichia coli host. In the Altered Sites II protocol, the mismatched oligonucleotide and an oligonucleotide that restores antibiotic resistance to the phagemid are simultaneously hybridized to the template and coupled by DNA synthesis and ligation. The restored antibiotic resistance is then used to select only those phagemids which incorporate the antibiotic repair oligonucleotide. Generally, between 60 and 90% of the phagemids recovered will incorporate both oligonucleotides. This method provides a simple an efficient technique for introducing specific mutations into DNA.     

One left-handed strand in DNA-oligonucleotide complexes?

A single strand of oligonucleotide can bind to double helical DNA under certain conditions. This must involve some unwinding of the original double helix in a process leading to the formation of a three-stranded region. The free energy for such an entropically unlikely reaction may come from a change in the degree of supercoiling of the original DNA. The conformation of the triple strand is investigated here using computer graphics and molecular mechanics calculations. It is suggested that on binding the oligonucleotide (strand 3) to two paired strands (1 and 2) in a supercoiled DNA molecule, strand 2 might adopt a left-handed conformation whilst strand 1 and strand 3 pair in the normal Watson-Crick B-configuration.