Glycinamide ribonucleotide synthetase from Escherichia coli: cloning, overproduction, sequencing, isolation, and characterization

The purD gene of Escherichia coli encoding the enzyme glycinamide ribonucleotide (GAR) synthetase, which catalyzes the conversion of phosphoribosylamine (PRA), glycine, and MgATP to glycinamide ribonucleotide, MgADP, and Pi, has been cloned and sequenced. The protein, as deduced by the structural gene sequence, contains 430 amino acids and has a calculated Mr of 45,945. Construction of an overproducing strain behind a lambda pL promoter allowed a 4-fold purification of the protein to homogeneity. N-Terminal sequence analysis and comparison of the sequence with those of other GAR synthetases confirm the amino acid sequence deduced from the gene sequence. Initial velocity studies and product and dead-end inhibition studies are most consistent with a sequential ordered mechanism of substrate binding and product release in which PRA binds first followed by MgATP and then glycine; Pi leaves first, followed by loss of MgADP and finally GAR. Incubation of [18O]glycine, ATP, and PRA results in quantitative transfer of the 18O to Pi. GAR synthetase is very specific for its substrate glycine.     

Purification and characterization of aminoimidazole ribonucleotide synthetase from Escherichia coli

Aminoimidazole ribonucleotide (AIR) synthetase has been purified 15-fold to apparent homogeneity from Escherichia coli which contains a multicopy plasmid containing the purM, AIR synthetase, gene. The protein is a dimer composed of two identical subunits of Mr 38,500. The N-terminal sequence, amino acid composition, and steady-state kinetics of the protein have been determined. AIR synthetase has been shown to catalyze the transfer of the formyl oxygen of [18O]formylglycinamide ribonucleotide to Pi.     

Molecular cloning and sequencing of the gene for CDP-diglyceride synthetase of Escherichia coli

The cds gene of Escherichia coli codes for the enzyme CDP-diglyceride synthetase. We now report the construction of plasmids which carry cds. Using these plasmids, we have sequenced 1274 base pairs of DNA, including a 750-base pair open reading frame which is the coding region of the cds gene. This DNA sequence allows the deduction of the primary peptide sequence for CDP-diglyceride synthetase. The protein is very hydrophobic, and, assuming no processing or modification, has a molecular weight of 27,570. Furthermore, there is a second open reading frame immediately after cds, implying that cds may be part of an operon. We have also constructed a runaway replication cds-plasmid that directs approximately 50-fold overproduction of CDP-diglyceride synthetase. This overproduction has been utilized in the purification of the enzyme to homogeneity, as described in the accompanying paper (Sparrow, C.P., and Raetz, C.R.H., J. Biol. Chem. 260, 12084-12091). Finally, the molecular cloning work reported herein allows the exact placement of the cds gene on the E. coli genetic map.     

Isolation of a multifunctional protein with aminoimidazole ribonucleotide synthetase, glycinamide ribonucleotide synthetase, and glycinamide ribonucleotide transformylase activities: characterization of aminoimidazole ribonucleotide synthetase

5-Aminoimidazole ribonucleotide (AIR) synthetase, glycinamide ribonucleotide (GAR) synthetase, and GAR transformylase activities from chicken liver exist on a single polypeptide of Mr 110,000 [Daubner, C. S., Schrimsher, J. L., Schendel, F. J., Young, M., Henikoff, S., Patterson, D., Stubbe, J., & Benkovic, S. J. (1985) Biochemistry 24, 7059-7062]. Details of copurification of these three activities through four chromatographic steps are reported. The ratios of these activities remain constant throughout the purification. AIR synthetase has an absolute requirement for K+ for activity and under these conditions has apparent molecular weights of 330,000, determined by Sephadex G-200 chromatography, and 133,000, determined by sucrose density gradient ultracentrifugation. Incubation of 18O-labeled formylglycinamidine ribonucleotide (FGAM) with AIR synthetase results in stoichiometric production of AIR, ADP, and [18O]Pi. NMR spectra of beta-FGAM and beta-AIR are reported.     

Overproduction, purification, and characterization of adenylosuccinate synthetase from Escherichia coli

Adenylosuccinate synthetase, encoded by the purA gene of Escherichia coli, catalyzes the first committed step toward AMP in the de novo purine biosynthetic pathway and plays an important role in the interconversion of purines. A 3.2-kb DNA fragment, which carries the purA gene, was cloned into the temperature-inducible, high-copy-number plasmid vector, pMOB45. Upon temperature induction, cells containing this plasmid produce adenylosuccinate synthetase at approximately 40 times the wild-type level. A scheme is presented for the purification of the overproduced adenylosuccinate synthetase to homogeneity in amounts sufficient for studies of its structure and mechanism. The wild-type and the overproduced adenylosuccinate synthetase enzyme preparations were judged to be identical by the following criteria. The amino acid sequence at the N-terminus of the overproduced enzyme proved identical to the corresponding sequence of the wild-type enzyme. Michaelis constants for both the wild-type and overproduced enzyme preparations were the same. And (iii) both proteins shared similar chromatographic behavior and the same mobility during sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. Results from size-exclusion chromatography and SDS-polyacrylamide gel electrophoresis suggest that adenylosuccinate synthetase exists as a dimer of identical, 48,000-Da, subunits.     

Formamidopyrimidine-DNA glycosylase of Escherichia coli: cloning and sequencing of the fpg structural gene and overproduction of the protein.

An Escherichia coli genomic library composed of large DNA fragments (10-15 kb) was constructed using the plasmid pBR322 as vector. From it 700 clones were individually screened for increased excision of the ring-opened form of N7-methylguanine (2-6-diamino-4-hydroxy-5N-methyl-formamidopyrimidine) or Fapy. One clone overproduced the Fapy-DNA glycosylase activity by a factor of 10-fold as compared with the wild-type strain. The Fapy-DNA glycosylase overproducer character was associated with a 15-kb recombinant plasmid (pFPG10). After subcloning a 1.4-kb fragment which contained the Fapy-DNA glycosylase gene (fpg+) was inserted in the plasmids pUC18 and pUC19 yielding pFPG50 and pFPG60 respectively. The cells harbouring pFPG60 displayed a 50- to 100-fold increase in glycosylase activity and overexpressed a 31-kd protein. From these cells the Fapy-DNA glycosylase was purified to apparent physical homogeneity as evidenced by a single protein band at 31 kd on SDS-polyacrylamide gels. The amino acid composition of the protein and the amino acid sequence deduced from the nucleotide sequence demonstrate that the cloned fragment contains the structural gene coding for the Fapy-DNA glycosylase. The nucleotide sequence of the fpg gene is composed of 809 base pairs and codes for a protein of 269 amino acids with a calculated mol. wt of 30.2 kd.     

Molecular cloning and overexpression of the glucosamine synthetase gene from Escherichia coli

A recombinant plasmid carrying a 4.6 kg restriction endonuclease NcoI-ClaI fragment of genomic DNA from Escherichia coli K12 was constructed. This plasmid complements the glmS mutation. Subcloning into pUC18 gave plasmid pGM10 encoding the structural gene of glucosamine synthetase, as judged by overexpression of enzyme activity and the isolation in high yield of the pure protein.     

Refinements in the rapid isolation of glutamine synthetase from Escherichia coli

In an earlier paper, we described a procedure for the isolation of glutamine synthetase and the protein product of the groE gene (pgroE) by polyethyleneimine precipitation and affinity chromatography on a Blue Dextran column (Z. F. Burton and D. Eisenberg, 1980, Arch. Biochem. Biophys.205, 478–488). Subsequently we found that several of the steps can be omitted when isolating glutamine synthetase. Two procedures are described which are very rapid and quantitative for the recovery of glutamine synthetase activity and which are useful for handling quantities of cells at least up to 500 g.     

Structure-function relationship of arginyl-tRNA synthetase from Escherichia coli: isolation and characterization of the argS mutation MA5002.

The Escherichia coli K12 argS MA5002 mutant appears to have a functionally altered arginyl-tRNA synthetase (ArgRS). The gene coding for this enzyme was isolated from E. coli genomic DNA using the PCR procedure and inserted into a pUC18 multicopy vector. Sequencing revealed that it differs from the wildtype ArgRS structural gene only by one mutation: a replacement of a C by an A residue which results in substitution of an arginine by a serine at position 134, located two residues downstream from the HVGH consensus sequence. As compared to the genomic enzyme level, this recombinant vector, containing the mutated gene, produces in E. coli JM103, about 100 times as much modified ArgRS. This enzyme was obtained nearly pure after only two chromatographic steps; it exhibits a 4-6 times as low activity and a 5 times as high Km value for ATP as the wildtype enzyme in the aminoacylation and ATP-PPi reactions; Km values for arginine and tRNAArg remained unaltered. The position of this mutation and its effect on enzymatic properties suggest the implication of arginine 134 in ATP binding as well as in the activation catalytic process.     

Molecular cloning and sequencing of the glycogen phosphorylase gene from Escherichia coli

The glgP gene, which codes for glycogen phosphorylase, was cloned from a genomic library of Escherichia coli. The nucleotide sequence of the glgP gene contained a single open reading frame encoding a protein consisting of 790 amino acid residues. The glgP gene product, a polypeptide of Mr 87,000, was confirmed by SDS-polyacrylamide gel electrophoresis. The deduced amino acid sequence showed that homology between glgP of E. coli and rabbit glgP, human glgP, potato glgP, and E. coli malP was 48.6, 48.6, 42.3, and 46.1%, respectively. Within this homologous region, the active site, glycogen storage site, and pyridoxal-5'-phosphate binding site are well conserved. The enzyme activity of glycogen phosphorylase increased after introduction on a multicopy of the glgP gene.     

Bacterial organomercurial lyase: overproduction, isolation, and characterization

Organomercurial lyase mediates the first of two steps in the microbial detoxification of organomercurial salts. This enzyme encoded on the plasmid R831 obtained from Escherichia coli J53-1 has been overproduced to the level of 3% of the soluble cell protein in E. coli by a construction using the T7 promoter. The enzyme has been purified to homogeneity in quantity in three steps. It is a monomer of Mr 22,400 with no detectable cofactors or metal ions. It catalyzes the protonolysis of the C-Hg bond in a wide range of organomercurial salts (primary, secondary, tertiary, alkyl, vinyl, allyl, and aryl) to the hydrocarbon and mercuric ion with turnover rates in the range of 1-240 min-1.     

Subcloning, characterization, and affinity labeling of Escherichia coli glycinamide ribonucleotide transformylase

Glycinamide ribonucleotide transformylase (GAR TFase; EC 2.1.2.2) has been purified 70-fold to apparent homogeneity from Escherichia coli harboring an expression vector encoding the purN gene product, GAR TFase. The protein is a monomer of Mr 23,241 and catalyzes a single reaction. Steady-state kinetic parameters for the enzyme have been obtained. The structural requirements for cofactor utilization have been investigated and found to parallel those of the multifunctional avian enzyme. The enzyme was inactivated with the affinity label N10-(bromoacetyl)-5,8-dideazafolate in a stoichiometric and active-site-specific manner. The ionization state of the cofactor analogue in the enzyme-cofactor complex appears to require the dissociation of the proton at N3 of the pyrimidine within the complex.     

Formylglycinamide ribonucleotide amidotransferase from Thermotoga maritima: structural insights into complex formation

In the fourth step of the purine biosynthetic pathway, formyl glycinamide ribonucleotide (FGAR) amidotransferase, also known as PurL, catalyzes the conversion of FGAR, ATP, and glutamine to formyl glycinamidine ribonucleotide (FGAM), ADP, P i, and glutamate. Two forms of PurL have been characterized, large and small. Large PurL, present in most Gram-negative bacteria and eukaryotes, consists of a single polypeptide chain and contains three major domains: the N-terminal domain, the FGAM synthetase domain, and the glutaminase domain, with a putative ammonia channel located between the active sites of the latter two. Small PurL, present in Gram-positive bacteria and archaea, is structurally homologous to the FGAM synthetase domain of large PurL, and forms a complex with two additional gene products, PurQ and PurS. The structure of the PurS dimer is homologous with the N-terminal domain of large PurL, while PurQ, whose structure has not been reported, contains the glutaminase activity. In Bacillus subtilis, the formation of the PurLQS complex is dependent on glutamine and ADP and has been demonstrated by size-exclusion chromatography. In this work, a structure of the PurLQS complex from Thermotoga maritima is described revealing a 2:1:1 stoichiometry of PurS:Q:L, respectively. The conformational changes observed in TmPurL upon complex formation elucidate the mechanism of metabolite-mediated recruitment of PurQ and PurS. The flexibility of the PurS dimer is proposed to play a role in the activation of the complex and the formation of the ammonia channel. A potential path for the ammonia channel is identified.     

Gene cloning,purification, and characterization of 2,3-diaminopropionate ammonia-lyase from Escherichia coli

2,3-Diaminopropionate ammonia-lyase (DAPAL), which catalyzes alpha,beta-elimination of 2,3-diaminopropionate regardless of its stereochemistry, was purified from Salmonella typhimurium. We cloned the Escherichia coli ygeX gene encoding a putative DAPAL and purified the gene product to homogeneity. The protein obtained contained pyridoxal 5'-phosphate and was composed of two identical subunits with a calculated molecular weight of 43,327. It catalyzed the alpha,beta-elimination of both D- and L-2,3-diaminopropionate. The results confirmed that ygeX encoded DAPAL. The enzyme acted on D-serine, but its catalytic efficiency was only 0.5% that with D-2,3-diaminopropionate. The enzymologic properties of E. coli DAPAL resembled those of Salmonella DAPAL, except that L-serine, D-and L-beta-Cl-alanine were inert as substrates of the enzyme from E. coli. DAPAL had significant sequence similarity with the catalytic domain of L-threonine dehydratase, which is a member of the fold-type II group of pyridoxal phosphate enzymes, together with D-serine dehydratase and mammalian serine racemase.     

Expression of Trypanosoma congolense trypanothione reductase in Escherichia coli: overproduction, purification, and characterization

The cloned trypanothione reductase gene from Trypanosoma congolense has been expressed in Escherichia coli to a level of 1% of the soluble protein. This has allowed facile purification and initial characterization of the reductase, and it appears by all criteria to be a representative member of the trypanothione reductase family. Most importantly, it shows the same exclusive substrate specificity for trypanothione over glutathione characteristic of other trypanothione reductases examined to date. The availability of the pure, cloned, sequenced reductase from T. congolense makes this enzyme a good target for structure/function studies and trypanocidal inhibitor design.     

S-Adenosylmethionine synthetase from Escherichia coli

Adenosylmethionine (AdoMet) synthetase has been purified to homogeneity from Escherichia coli. For this purification, a strain of E. coli which was derepressed for AdoMet synthetase and which harbors a plasmid containing the structural gene for AdoMet synthetase was constructed. This strain produces 80-fold more AdoMet synthetase than a wild type E. coli. AdoMet synthetase has a molecular weight of 180,000 and is composed of four identical subunits. In addition to the synthetase reaction, the purified enzyme catalyzes a tripolyphosphatase reaction that is stimulated by AdoMet. Both enzymatic activities require a divalent metal ion and are markedly stimulated by certain monovalent cations. AdoMet synthesis also takes place if adenyl-5'yl imidodiphosphate (AMP-PNP) is substituted for ATP. The imidotriphosphate (PPNP) formed is not hydrolyzed, permitting dissociation of AdoMet formation from tripolyphosphate cleavage. An enzyme complex is formed which contains one equivalent (per subunit) of adenosylmethionine, monovalent cation, imidotriphosphate, and presumably divalent cation(s). The rate of product dissociation from this complex is 3 orders of magnitude slower than the rate of AdoMet formation from ATP. Studies with the phosphorothioate derivatives of ATP (ATP alpha S and ATP beta S) in the presence of Mg2+, Mn2+, or Co2+ indicate that a divalent ion is bound to the nucleotide during the reaction and provide information on the stereochemistry of the metal-nucleotide binding site.     

Mutant isolation and cloning of the gene encoding protease VII from Escherichia coli

A mutant of Escherichia coli lacking protease VII, the outer membrane-associated protease which specifically cleaves paired basic residues (1), was isolated by using N-methyl-N'-nitro-N-nitrosoguanidine treatment. The mutant exhibited no significant change as for its growth rate and microscopic feature compared with wild cells. The gene encoding protease VII was cloned by using complementation analysis of protease VII (-) mutation. The minicell experiment showed that the gene encoded a putative precursor protein of 38,000 Mr which was processed into a protein of 36,000 Mr suggesting the presence of a signal peptide on the putative precursor.     

Purification and characterization of 3-deoxy-D-manno-octulosonate 8-phosphate synthetase from Escherichia coli

3-Deoxy-D-manno-octulosonate (KDO)-8-phosphate synthetase has been purified 450-fold from frozen Escherichia coli B cells. The purified enzyme catalyzed the stoichiometric formation of KDO-8-phosphate and Pi from phosphoenolpyruvate (PEP) and D-arabinose-5-phosphate. The enzyme showed no metal requirement for activity and was inhibited by 1 mM Cd2+, Cu2+, Zn2+, and Hg2+. The inhibition by Hg2+ could be reversed by dithiothreitol. The optimum temperature for enzyme activity was determined to be 45 degrees C, and the energy of activation calculated by the Arrhenius equation was 15,000 calories (ca. 3,585 J) per mol. The enzyme activity was shown to be pH and buffer dependent, showing two pH optima, one at pH 4.0 to 6.0 in succinate buffer and one at pH 9.0 in glycine buffer. The isoelectric point of the enzyme was 5.1. KDO-8-phosphate synthetase had a molecular weight of 90,000 +/- 6,000 as determined by molecular sieving through G-200 Sephadex and by Ferguson analysis using polyacrylamide gels. Based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the 90,000-molecular-weight native enzyme was composed of three identical subunits, each with an apparent molecular weight of 32,000 +/- 4,000. The enzyme had an apparent Km for D-arabinose-5-phosphate of 2 X 10(-5) M and an apparent Km for PEP of 6 X 10(-6) M. No other sugar or sugar-phosphate could substitute for D-arabinose-5-phosphate. D-Ribose-5-phosphate was a competitive inhibitor of D-arabinose-5-phosphate, with an apparent Ki of 1 X 10(-3) M. The purified enzyme has been utilized to synthesize millimole quantities of pure KDO-8-phosphate.