Technical note: Occlusal fingerprint analysis: Quantification of tooth wear pattern

Information about food ingestion and mastication behavior during the lifespan of an individual is encoded in the dental occlusal wear pattern. To decode this information, we describe a new method called occlusal fingerprint analysis (OFA). Structural parameters of wear facets on the occlusal surface of teeth are quantified from digitized casts for the interpretation of occlusal aspects. The OFA provides an individual three‐dimensional dental occlusal compass that indicates the major pathways of interaction between antagonists, revealing information about development, spatial position, and enlargement of wear facets. Humans develop a very similar overall pattern of crown contacts, although specific characteristics of wear facets reflect an individual's occlusal relationships and masticatory behavior. We hypothesize that the wear pattern is a unique character and therefore valuable for individual identification. Furthermore we suggest that OFA, when further developed, may be useful for identification of behavioral, biological, and chemical factors affecting crown morphology. Am J Phys Anthropol, 2009. © 2009 Wiley‐Liss, Inc.     

Association of occlusal wear facets in patients with temporomandibular disorders

Occlusal changes were important factors in temporomandibular disorder (TMD). It is of interest to evaluate the association of occlusal wear facets in TMD patients. We used a dataset of 49 patients with and without TMD for this study. Occlusal wear facets were evaluated using Smith and Knight tooth wear index. Data shows that teeth wear was present more in patients with TMD (55%). The age group 26-40 years showed high prevalence of teeth wear (grade1) in TMD patients (P value = 0.034). TMD was present more in females than males. Female (54%) patients with TMD showed more teeth wear compared to males. Most patients with TMD showed posterior teeth wear (61%) than generalized teeth wear. Thus, association was present between occlusal teeth wear and TMD patients especially in the age group of 26-40 years. Hence, proper evaluation of occlusal factors will aid in early diagnosis of TMDs.     

Modular Wear Facet Nomenclature for mammalian post-canine dentitions

Abstract

Dental wear facets on the occlusal surface of premolars and molars are traces of their main function, the mastication and therefore reflect masticatory movements and also paramasticatory (i.e. non-dietary use of teeth) behavior. Here we present the Modular Wear Facet Nomenclature applicable to most mammalian dentitions. Topographic positions of wear facets in relation to the major cusps and crests of the teeth are used to designate the areas of the occlusal surface the facets occupy (e.g. their mesial, distal, lingual, or buccal position). Previous published systems for labeling wear facets have been inconsistent with each other. Therefore, we provide a synoptic review of the most widely-used terminologies, and introduce the alternative Modular Wear Facet Nomenclature. This nomenclature aims to overcome the difficulties caused by the existing inconsistent wear facet terminologies. Our new approach is applicable to dentitions where the occlusal morphology does not change significantly for most of the lifetime of the animal. In those dentitions, the primary occlusal surfaces are not significantly modified as wear facets become more extensive with wearing. This appears to be a common pattern in pre-tribosphenic, tribosphenic molars, and the teeth derived from tribosphenic precursors (e.g. bunodont molar morphologies). In teeth where the secondary occlusal surface is functionally intensely modified (i.e. high-crowned and evergrowing teeth with large areas of dentine exposed) any facet labeling system appears to be challenging, since the identification of individual facets is blurred and their spatial position may be indeterminable.     

Form and patterning of anterior tooth wear among aboriginal human groups

Form and severity of dental attrition was assessed in aboriginal human groups including hunter-gatherers (Eskimos, Australians) and those with dependence to a varying degree on food production (Southwest U.S. and Ohio American Indians). Wear on anterior teeth was both relatively and absolutely greater in the hunter-gatherers, as indicated by comparisons of wear on anterior and posterior teeth which come into occlusion at roughly the same time. Distinct differences in form of anterior wear were also apparent: The hunter-gatherers exhibited steadily increasing incidences of labially rounded wear with greater functional age, while the food-producing groups showed little or no rounding but instead high frequencies of heavily cupped wear (especially in those with premature loss of posterior teeth). These differences were attributed to nonmasticatory utilization of the front teeth in hunter-gatherers and to employment of the anterior teeth in masticatory (grinding) activities necessitated by large-scale molar loss in food producers.     

Relationships between attrition and lingual tilting in human teeth

Associations between occlusal dental attrition and the lingual tilting of human teeth were investigated in two aboriginal California populations. A literature survey suggests lingual tilting is related geographically and temporally to the helicoidal occlusal plane in humans; if true, lingual tilting should be expected throughout the Homo osteological record. Buccal alveolar abscesses, exposed pulp chambers, extent of tooth attrition, angle of lingual tilt, and amount of overjet were observed for lingually tilted teeth. These attributes were analyzed statistically, leading to a conclusion that lingual tilting is slight and infrequent unless tooth attrition is pronounced. It is suggested that lingual tilting is due in part to masticatory stress. A feedback model considers lingual tilting as one conspicuous manifestation of a more complex “severe attrition syndrome,” the initial stimulus for which may derive from heavy occlusal tooth wear. Untested possibilities should be examined–e.g., age-related changes, the impact of the helicoidal occlusal plane, and the role of masticatory forces.     

军都山古代人群牙齿磨耗及其饮食

以军都山墓地为代表的"玉皇庙文化"系中国北方青铜时代的一支具有鲜明地方特色的少数部族文化。本文对军都山墓地出土人骨牙齿标本作牙齿磨耗状况分析,试图为其饮食结构和社会经济形态的探讨提供线索。结果显示:军都山古代人群中,相同年龄组的男女两性牙齿磨耗差异不大;前部牙齿磨耗轻于后部臼齿,第一臼齿磨耗最重;臼齿磨耗样式大多呈现"正常平匀"式,臼齿磨耗角度大多较小,两者均随年龄而变化但没有显著的性别差异。经与其他样本组的对比认为军都山古代人群牙齿磨耗的特点可能与其社会经济农牧兼营的性质有关,推测动物性食物(肉食)可能在军都山古代人群主要饮食结构中占据重要比例,并包含有一定的农业经济成分。不同游牧人群牙齿磨耗程度差异较大,只有结合了磨耗形态及其他信息才有可能更切实地反映其饮食状况。     

Enamel microstructure and molar wear in the greater galago,Otolemur crassicaudatus (mammalia,primates)

This study describes the molar enamel microstructure of the greater galago, based on SEM study of four individuals. Galago molar enamel consists primarily of radially oriented Pattern 1 prisms. However, the most superficial enamel is characterized by regions of poorly developed prisms or nonprismatic enamel, and Pattern 3 prisms can be found at depths intermediate and deep to the enamel surface. Orientations of prism long axes relative to wear surfaces differ among functionally distinct regions (cuspal facets, Phase I/II facets, and crushing basins). Consequently, orientations of enamel crystallites relative to these surfaces also differ. Because crystallites are the structural unit involved in enamel abrasion, these differences in orientation may have important effects on molar wear patterns. Crystallite orientations differ most between cuspal facets and Phase I/II facet surfaces. Cuspal facets are characterized by near surface-parallel interprismatic and surface-oblique prismatic crystallites. Previous experimental studies suggest that this arrangement is most resistant to wear when surface-normal (compressive) loads predominate. In contrast, prismatic and interprismatic crystallites intercept Phase I/II facet surfaces obliquely, an arrangement expected to resist abrasion when surface-parallel (shearing) loads predominate. Superficial enamel is preserved at most basin surfaces, indicating that these regions are subject to comparatively little abrasive wear. These results support the hypothesis that galago occlusal enamel is organized so as to resist abrasion of different functional regions, a property that may prove important in maintaining functional efficiency. However, this largely reflects constraints of occlusal topography on a microstructure typical of many mammals and thus does not appear to represent a structural innovation. © 1993 Wiley-Liss, Inc.     

西藏故如甲木墓地人群牙齿磨耗和食物结构的关系

西藏阿里故如甲木墓地位于阿里地区噶尔县,是迄今为止阿里地区发现的规模最大、埋葬最集中的古代墓葬群。2012-2014年由中国社会科学院考古研究所和西藏自治区文物保护研究所联合开展发掘工作,发现并清理了11座墓葬,其中8座墓葬的时代略早,约为公元3-4世纪。另外3座为公元7-9世纪的吐蕃时期墓葬。本文对时代略早的8座故如甲木墓地出土的人骨进行了牙齿磨耗的观察,计算了每颗牙齿的平均磨耗等级以及前后部牙齿的磨耗差别指数,并选择了7组不同时代、不同地点、不同生业类型的古代人群进行了比较分析。结果表明,故如甲木的古代人群牙齿磨耗与畜牧业人群的磨耗接近,这也符合故如甲木当时的生业类型,即以牧业为主,辅以青稞和谷物的种植栽培。从牙齿磨耗推测故如甲木的人群在食物结构中有足够的动物性食物,这与碳氮同位素的食物结构分析结果也是一致的。     

Patterns of dental wear and the role of the canine in Cercopithecinae.

The importance of dental wear patterns in understanding masticatory functions in primates has long been appreciated. However, studies of wear patterns among populations of nonhuman primates are few. The purpose of this investigation is to establish the developmental aspects of dental wear in the Cercopithecinae and to describe certain relevant morphological traits. Studies were made of dental casts from 200 primate specimens of Macaca nemestrina, Macaca mulatta, and Papio cynocephalus. These casts were taken at four-month intervals, beginning at two years of age and continuing over a period of six to seven years. The wear pattern starts with the rounding and eventual flattening of the protoconid and protocone of the erupted first molars. Once this stage is reached, the hypoconid and metaconid of the mandibular, and the hypocone and paracone of the maxillary molars are rounded and eventually flattened. This pattern is maintained until the cusp tips are removed and the dentin exposed, however, the entoconid and metacone are not subjected to significant wear at this stage. Analysis of these dental casts and museum specimens has provided data on the development of dental wear during the maturation of these primates. The distribution of forces acting upon the teeth produce diagnostic patterns of wear, which provide evidence of the force location and magnitude. In examining the data, the hypothesis of canine guidance and its limitation of mandibular motion was evaluated. Specimens whose canines were removed demonstrate that the canines play no significant role in the development or maintenance of dental wear planes.     

Palaeoecology of cave bears as evidenced by dental wear analysis: a review of methods and recent findings

Abstract

The study of dental wear was first used years ago to infer the palaeoecology of fossil mammals and in particular their diet. Results depend predominantly on the scale of the analysis used. Analyses of dental macrowear, mesowear or microwear do not provide the same type of dietary information, be it about the seasonal, annual or lifetime diet. This contribution focuses on emblematic species, cave bears (Ursidae), in particular Ursus spelaeus spelaeus. Methods used by previous researchers to infer their dietary preferences and thus their palaeoecology are reviewed and compared. This review is complemented by an analysis of several specimens of cave bears from the Goyet cave in Belgium, using dental microwear texture analysis (DMTA), a methodology widely applied for reconstructing palaeodiets. Three main conclusions are drawn here: (1) DMTA is the method that provides the most precise palaeobiological inferences; (2) during the pre-dormancy period, cave bears show dietary flexibility; (3) dental wear alone might be not sufficient to provide a complete reconstruction of the cave bear palaeodiet.     

Tooth wear in captive wild ruminant species differs from that of free-ranging conspecifics

The mesowear method evaluates the wear patterns of herbivore cheek teeth by visually evaluating the facet development of the occlusal surfaces. It thus allows classification of most herbivorous ungulates into browsers, grazers or intermediate feeders, due to the fact that in grazers, tooth wear is characterized by a comparatively high degree of abrasion, most probably due to the presence of silicacious phytoliths in grasses, a higher amount of dust and grit adhering to their forage, or both. It has been suggested that excessive tooth wear could be a particularly limiting factor in the husbandry of captive large browsing species, and major tooth wear was demonstrated in captive as compared to free-ranging giraffe. If this increased tooth wear in captivity was an effect of feeding type and diets fed, then it would be expected that other browsing species are affected in a similar manner. In order to test this hypothesis, we investigated the dental mesowear pattern in captive individuals of 19 ruminant species and compared the results to data on free-ranging animals. Compared to free-ranging populations, captive browsers show a significantly more abrasion-dominated tooth wear signal. The reverse applies to captive grazers, which tend to show a less abrasion-dominated wear in captivity. Captive ruminants were generally more homogenous in their wear signature than free-ranging ruminants. If grit contamination in the natural habitat is a major cause of dental wear in grazers, then diets in captivity, although similar in botanical composition, most likely contain less abrasives due to feeding hygiene. If dental wear is one of the major factors limiting longevity, then captive grazers should achieve longer lifespans than both captive browsers and free-ranging grazers. In particular with respect to browsers, the results suggest that captive feeding regimes could be improved.     

Patterns of approximal wear in cheek teeth of a Romano-British population

The approximal surfaces of premolars and molars of 376 adult British-Romano skulls were examined for wear facets. The type of wear was designated as convex, concave, sigmoid, or flat, and the degree was categorised on a three-point scale. Concave wear facets were more frequently seen in the older age groups, but the type of wear was similar on right and left sides. Taking all teeth together or as individual tooth types, concave wear was significantly more likely on mesial rather than distal surfaces. The degree of wear was age related and similar on right and left sides in both males and females. It is suggested that the distribution of concave facets may be related to movements between adjacent teeth.     

Foraging conditions, tooth wear and herbivore body reserves: a study of female reindeer

Several aspects of the life history of reindeer (Rangifer tarandus) are related to the nutritional condition of the animals. Moreover, compensatory growth and fattening in summer decreases with age. The interaction of tooth wear and the standing crop of lichens on age-related variation in body size and tissue reserves was examined to evaluate the proximate causes of density-dependent food limitation on life history parameters in female reindeer. Studies in nine semi-domesticated free-ranging reindeer herds showed that molar height depended on the mean standing crop of terrestrial lichens in winter habitats. The extent of tooth wear had the strongest effect on body reserves among the oldest females (11–14 years). This indicates that severe tooth wear limits the animals′ ability to process food efficiently and, hence, to maintain their body reserves. Both tooth wear and the biomass of lichens influenced body mass in old females, probably because on heavily exploited winter ranges reindeer had to use higher proportions of lower-ranking coarser foods, especially dwarf shrubs. Received: 1 December 1997 / Accepted: 13 July 1998     

Interproximal grooving and task activity in Australia

Interproximal grooving was recorded in 85 nineteenth century aboriginal skulls from Swanport in South Australia. One or more grooved teeth were noted in 41% of individuals, but the frequency of grooving in males was twice that in females. Distal surface grooving was noted in 93 teeth in contrast to only five instances of mesial grooving. The lesions were similar in appearance to those reported in many other populations--confined primarily to the premolar-molar region, located at the cementoenamel junction, directed horizontally, and usually clean-cut and free of caries. Stripping of animal sinews between the clenched posterior teeth has been recorded on film as a common task activity in traditional aboriginal society. In our opinion, task activity and not toothpicking was the likely cause of the observed interproximal grooving in the aboriginals.     

Dental wear,wear rate,and dental disease in the African apes

The African apes possess thinner enamel than do other hominoids, and a certain amount of dentin exposure may be advantageous in the processing of tough diets eaten by Gorilla. Dental wear (attrition plus abrasion) that erodes the enamel exposes the underlying dentin and creates additional cutting edges at the dentin‐enamel junction. Hypothetically, efficiency of food processing increases with junction formation until an optimal amount is reached, but excessive wear hinders efficient food processing and may lead to sickness, reduced fecundity, and death. Occlusal surfaces of molars and incisors in three populations each of Gorilla and Pan were videotaped and digitized. The quantity of incisal and molar occlusal dental wear and the lengths of dentin–enamel junctions were measured in 220 adult and 31 juvenile gorilla and chimpanzee skulls. Rates of dental wear were calculated in juveniles by scoring the degree of wear between adjacent molars M1 and M2. Differences were compared by principal (major) axis analysis. ANOVAs compared means of wear amounts. Pearson correlation coefficients were calculated to compare the relationship between molar wear and incidence of dental disease. Results indicate that quantities of wear are significantly greater in permanent incisors and molars and juvenile molars of gorillas compared to chimpanzees. The lengths of dentin–enamel junctions were predominantly suboptimal. Western lowland gorillas have the highest quantities of wear and the most molars with suboptimal wear. The highest rates of wear are seen in Pan paniscus and Pan t. troglodytes, and the lowest rates are found in P.t. schweinfurthii and G. g. graueri. Among gorillas, G. b. beringei have the highest rates but low amounts of wear. Coefficients between wear and dental disease were low, but significant when all teeth were combined. Gorilla teeth are durable, and wear does not lead to mechanical senescence in this sample. Am. J. Primatol. 72:481–491, 2010. © 2010 Wiley‐Liss, Inc.     

Developmental palaeontology in synapsids: the fossil record of ontogeny in mammals and their closest relatives

The study of fossilized ontogenies in mammals is mostly restricted to postnatal and late stages of growth, but nevertheless can deliver great insights into life history and evolutionary mechanisms affecting all aspects of development. Fossils provide evidence of developmental plasticity determined by ecological factors, as when allometric relations are modified in species which invaded a new space with a very different selection regime. This is the case of dwarfing and gigantism evolution in islands. Skeletochronological studies are restricted to the examination of growth marks mostly in the cement and dentine of teeth and can provide absolute age estimates. These, together with dental replacement data considered in a phylogenetic context, provide life-history information such as maturation time and longevity. Palaeohistology and dental replacement data document the more or less gradual but also convergent evolution of mammalian growth features during early synapsid evolution. Adult phenotypes of extinct mammals can inform developmental processes by showing a combination of features or levels of integration unrecorded in living species. Some adult features such as vertebral number, easily recorded in fossils, provide indirect information about somitogenesis and hox-gene expression boundaries. Developmental palaeontology is relevant for the discourse of ecological developmental biology, an area of research where features of growth and variation are fundamental and accessible among fossil mammals.     

Origin of caulinary ant domatia and timing of their onset in plant ontogeny: evolution of a key trait in horizontally transmitted ant-plant symbioses

Many ant plants possess caulinary domatia, hollow and usually swollen stems. What are the evolutionary origins of this key trait of ant‐plant symbioses? In a single lineage, myrmecophytes often differ in the timing of the first appearance of domatia. What processes have led to diversification in the timing of expression of domatia in ontogeny? We suggest that an approach based on the analysis of leaf‐ stem size correlations, that appear general in trees, can supply answers to both these questions. Traits associated with increased primary diameter of twigs may have facilitated the evolution of domatia. Among lineages, differences in stem diameter may help to explain why domatia appeared in some, and not in others. Within species, because twig primary diameter increases over plant ontogeny, initially ants may have colonized only plants at later stages of development, whose twigs had reached a minimum size. We thus postulate that expression of domatia later in development is the primitive condition in lineages with domatia, and that increasing specialization of ants and plants enhanced both the probability of establishment and ant protection, favouring precocity of onset of domatia and other myrmccophytic characters. In the language of heterochrony, these characters are affected by prc‐displacement.     

Jaw movement and tooth use in recent and fossil primates

Masticatory movements and molar wear facets in species of Tupaia, Galago, Saimiri, and Ateles have been examined using cinefluorography and occlusal analysis. The molars have been compared with those of a fossil series: Palenochtha, Pelycodus and Aegyptopithecus. The extant primates are almost identical in their feeding behaviour, the movements and timing of the masticatory cycle. Food is first puncture-crushed where the cycle is elongated, the power stroke attenuated and abrasion facets are produced on the molars. Chewing follows, the movements are more complex, the power stroke has two distinct parts and attrition facets are produced. In the primitive forms (Tupaia, Palenochtha), shearing blades, arranged in series (en echelon) were used to cut the food during the first part (Phase I) of the power stroke as the lower teeth move into centric occlusion. This mechanism has been progressively replaced by a system of blade-ringed compression chambers which cut and compartmentalise the food in Phase I. This is followed by an anteromedially and inferiorly directed movement away from centric occlusion (Phase II) in which the food is ground. In both extant and fossil series there has been a clear trend towards the elongation of Phase II with a corresponding reduction in Phase I. These results suggest that the observed changes in the morphology of the jaw apparatus have probably occurred within the limits set by a pre-existing behavioral pattern.