Reduction of Selenium Oxyanions in Wastewater Using Two Bacterial Strains

The biological reduction of selenium oxyanions is capable of reducing both selenate and selenite to insoluble elemental selenium. In this process, however, bacteria inevitably require expensive chemicals such as yeast extract in almost all cases. Therefore, the reduction of selenium oxyanions with inexpensive alcohol would be more practical. A Pseudomonas sp. strain 4C‐C isolated from a sludge in a wastewater treatment facility was able to reduce selenate to selenite using ethanol as an electron donor for its anaerobic respiration, but could not reduce selenite to elemental selenium. Paracoccus denitrificans JCM‐6892, on the other hand, was observed to be able to reduce selenite to elemental selenium in the presence of ethanol, but not selenate to selenite. Therefore, a mixture containing a suspension of Pseudomonas sp. strain 4C‐C and P. denitrificans JCM‐6892 cells allowed selenate to be reduced to insoluble elemental selenium via selenite in the presence of ethanol and was also capable of reducing nitrate to nitrogen gas. Aiming at simplicity of the recovery process of insoluble elemental selenium, a polymeric gel immobilized mixture of the two bacterial strains was examined using ethanol as an electron donor. The immobilized mixture could therefore reduce not only selenate to elemental selenium, but also nitrate to nitrogen gas in a single step. The gel that immobilized the microbial mixture changed its color during the process to bright red and no red elemental selenium was left in the wastewater. This indicates that the reduced elemental selenium was completely absorbed in the gel. This simple bacterial combination would therefore be effective in the presence of ethanol to reduce selenium oxyanions in various wastewaters containing selenium and the other oxyanions.     

Removal of soluble selenium by a selenate-reducing bacterium Bacillus sp. SF-1

In order to develop a biological process for removal of selenium from industrial wastewater, Bacillus sp. strain SF-1 was isolated from selenium-contaminated sediment. The bacterium reduces selenate to selenite and subsequently to nontoxic insoluble elemental selenium using lactate as an electron donor and selenate as an electron acceptor in an anaerobic condition. Elemental selenium transformed from soluble selenium was deposited both inside and outside of the cells. Since the selenate reduction rate of the strain SF-1 was higher than the selenite reduction rate, selenite was transiently accumulated. In an experiment of the repeated soluble selenium reduction by strain SF-1, 0.5 mM of selenate was sequentially treatable with a cycle of one day. Thus, our sequential system for removal of soluble selenium is very useful.     

Effects of salinity and nitric oxide donor sodium nitroprusside (SNP) on development and salt secretion of salt glands of Limonium bicolor

NO, as a signaling molecule, is involved in abiotic stresses. Limonium bicolor seedlings were treated with 200 mM NaCl combined with 0.05 mM SNP for 20 days to study the effects of NO on development and salt-secretion rates of salt glands. It was shown that the total number of salt glands on adaxial surfaces under condition of 200 mM NaCl containing 0.05 mM SNP treatment increased significantly compared with that under 200 mM NaCl treatment. Na⁺ secretion rate per leaf under 200 mM NaCl containing 0.05 mM SNP was significantly higher than that under 200 mM NaCl without SNP. However, there was no significant difference in salt-secretion rate of individual salt glands between 200 mM NaCl containing 0.05 mM SNP treatment and 200 mM NaCl treatment. Although there was no significant difference in salt-secretion rate of individual glands, Na⁺ concentration in the leaves treated with 200 mM NaCl solution containing SNP was significantly lower than that treated with 200 mM NaCl solution. Treatment with 200 mM NaCl solution containing SNP caused a remarkable increase in Na⁺ concentration in salt glands. Obviously, the efficiency of the secretion process per gland was enhanced by adding SNP to NaCl. The results showed NO may enhance the salt secretion by inducing more dermatogen cells to develop into salt glands and by enhancing the efficiency of the secretion process per gland.     

Dimethylselenide and Dimethyltelluride Formation by a Strain of Penicillium

A strain of Penicillium which produced dimethylselenide from inorganic selenium compounds was isolated from raw sewage. Sulfate and methionine enhanced growth of the fungus and its production of dimethylselenide in media containing selenite. In solutions containing selenate, methionine inhibited dimethylselenide formation while stimulating proliferation of the fungus. Dimethylselenide was also generated from inorganic selenide. Alkylation did not appear to be a significant mechanism of selenium detoxication by this organism. Dimethyltelluride was also produced by the organism from several tellurium compounds, but this product was synthesized only in the presence of both tellurium and selenium. The yields of dimethylselenide and dimethyltelluride varied with the relative concentrations of selenium and tellurium in the medium.     

Optimization of Chromium(VI) Detoxification by Pseudomonas aeruginosa and Its Application for Treatment of Industrial Waste and Contaminated Soil

The reduction of Cr(VI) to Cr(III) is a potential detoxification process. In this study, seven Pseudomonas spp. were isolated and screened for chromium reduction. Isolate P4 was able to grow in the presence of 8000 μM chromium, in spite of the fact that the isolate was not previously exposed to any metal stress. Isolate P4 was identified as Pseudomonas aeruginosa strain SRD chr3 by 16S rDNA sequence analysis. Shake flask study showed 78% reduction of 1000 μM Cr(VI) after 6 h of incubation. The optimum pH for chromium reduction by the isolate was between 6 and 8. Isolate Pseudomonas aeruginosa gave 50–80% Cr(VI) reduction even in the presence of 100 mM of Cu, Mn, Ni, and Zn and 300–800 mM NaCl in 24 h, compared with the absence of any of these metals. In a 5-L reactor, the isolate showed 84.85% reduction of Cr(VI) even at the 70th cycle, with a hydraulic retention time of 24 h from the effluent of a hard chrome plating (electroplating) industry, which contained 2100 mg L^?1 hexavalent chromium. The chromate-amended soil inoculated with the isolate showed 2800 μM chromium removal from 4000 μM Cr(VI) kg^?1 of soil, which corresponds to 70% removal. The isolate had the ability to degrade stimulated waste containing 10,000 μM chromium.     

Aerobic, Selenium-Utilizing Bacillus Isolated from Seeds of Astragalus crotalariae

Bacillus sp. strain SS, an aerobic, gram-positive sporeformer, was isolated from seeds of Astragalus crotalariae, a selenium-accumulating plant. This bacillus grew in a nutrient broth (containing beef extract and peptone) if the medium was supplemented with high concentrations of selenium. Concentrations of Na₂SeO₃ that supported growth ranged from 3 to 100 mM. After 24 h of growth, the culture developed a deep red color characteristic of elemental selenium. When selenium was provided in the form of selenate, the pattern of growth showed a prolonged lag period, from 24 to 48 h. Final growth remained below that of cells cultured in the presence of selenite, and only a light red color developed. Concentrations of selenate below 40 mM failed to support growth. Tellurate, though not tellurite, could replace selenite, but only over a narrow concentration range, 5 to 10 mM. By 24 h, the typical black color of elemental tellurium developed. Bacillus sp. strain SS grew also in brain heart infusion broth and Trypticase soy broth (BBL Microbiology Systems, Cockeysville, Md.) without the addition of selenium or tellurium compounds. When added to these media, 50 mM selenite was tolerated and metabolized by the organism. The crucial distinction between this bacillus and other selenium-tolerant organisms (e.g., Salmonella) remains: under certain conditions, growth requirements of Bacillus sp. strain SS are fulfilled by selenium (and tellurium) compounds.     

Arsenite oxidizing multiple metal resistant bacteria isolated from industrial effluent: their potential use in wastewater treatment

Arsenite oxidizing bacteria, isolated from industrial wastewater, showed high resistance against arsenite (40 mM) and other heavy metals (10 mM Pb; 8 mM Cd; 6 mM Cr; 10 mM Cu and 26.6 mM As⁵⁺). Bacterial isolates were characterized, on the basis of morphological, biochemical and 16S rRNA ribotyping, as Bacillus cereus (1.1S) and Acinetobacter junii (1.3S). The optimum temperature and pH for the growth of both strains were found to be 37 °C and 7. Both the strains showed maximum growth after 24 h of incubation. The predominant form of arsenite oxidase was extracellular in B. cereus while in A. junii both types of activities, intracellular and extracellular, were found_. The extracellular aresenite oxidase activity was found to be 730 and 750 µM/m for B. cereus and A. junii, respectively. The arsenite oxidase from both bacterial strains showed maximum activity at 37 °C, pH 7 and enhanced in the presence of Zn²⁺. The presence of two protein bands with molecular weight of approximately 70 and 14 kDa in the presence of arsenic points out a possible role in arsenite oxidation. Arsenite oxidation potential of B. cereus and A. junii was determined up to 92 and 88 % in industrial wastewater after 6 days of incubation. The bacterial treated wastewater improved the growth of Vigna radiata as compared to the untreated wastewater. It indicates that these bacterial strains may find some potential applications in wastewater treatment systems to transform toxic arsenite into less toxic form, arsenate.     

Isolation,selection, and biological characterization research of highly effective electricigens from MFCs for phenol degradation

The microbial fuel cells (MFCs) are recognized to be highly effective for the biodegradation of phenol. For isolating the phenol-degrading bacteria, the sample containing 500 mg/L phenol was collected from the MFCs. The strain (WL027) was identified basing on the 16S rRNA gene analysis and phylogenetic analysis as Bacillus cereus. The effects of pH, temperature, concentrations of phenol, heavy metal ions, and salt on the growth of strain as well as the degradation of phenol have been carefully studied. The WL027-strain exhibited favorable tolerance for the metal cations including Cr²⁺, Co²⁺, Pb²⁺, and Cu²⁺ with the concentration of 0.2 mg/L and NaCl solution with a high concentration of 30 g/L. In 41 h, 86.44% of 500 mg/L phenol has been degraded at the initial pH at 6 and the temperature of 30 °C. The strain was highly active electrogenesis bacteria and the coulombic efficiency reached 64.25%, which showed significant advantage on the efficient energy conversion. Therefore, due to the highly efficient degradation of phenol, WL027-strain could be used in the treatment of phenol-containing wastewater.     

Bio-Reduction of Selenite to Elemental Red Selenium by <Emphasis Type="Italic">Tetrathiobacter kashmirensis</Emphasis>

A bacterium that detoxifies selenite by reduction to insoluble elemental red selenium was isolated from soil. The strain showed an unusually high resistance to the toxic effects of selenite by growing in media containing 64 mM selenite. 16S rRNA gene sequence alignment identified the isolate as Tetrathiobacter kashmirensis. Fatty acid analysis and morphology confirmed the identification. The isolate reduced selenite to elemental selenium under aerobic conditions only. Native gel electrophoresis of cell-free extracts revealed a band, corresponding to a molecular weight of approximately 120 kDa, that reduced selenite. In culture, the strain did not reduce selenate; however, a soluble and inducible enzyme with a molecular weight of approximately 90 kDa that reduced both selenate and nitrate was present in cell-free extracts. This organism might be useful in bioreactors designed to remove selenite from contaminated water.     

Biomineralization of 2,3,4,6-Tetrachlorophenol by Bacillus sp. and Staphylococcus sp. Isolated from Secondary Sludge of Pulp and Paper Mill

Three 2,3,4,6-tetrachlorophenol (2,3,4,6-TeCP)-mineralizing bacteria were isolated from the secondary sludge of a pulp and paper industry. The isolates used 2,3,4,6-TeCP as a source of carbon and energy and were capable of degrading this compound, as indicated by stoichiometric release of chloride and biomass formation. Based on 16S rRNA gene sequence analysis, the bacteria were identified as Bacillus megaterium (CL3), Staphylococcus suciri (CL10), and Bacillus thuringensis (CL11). High-performance liquid chromatography (HPLC) analysis revealed that these isolates were able to degrade 2,3,4,6-TeCP at higher concentrations (600 mg/L or 2.5 mM). A consortia of the isolates completely removed 2,3,4,6-TeCP from the sludge obtained from a pulp and paper mill within 2 weeks when supplemented at a rate of 100 mg/L or 0.43 mM. A bacterial consortium also significantly reduced absorbable organic halogen (AOX) and extractable organic halogen (EOX) by 63% and 68%, respectively, from the sludge. These isolates have a high potential to remove 2,3,4,6-TeCP and may be used for remediation of pulp paper mill waste containing 2,3,4,6-TeCP.     

Heterotrophic nitrification and aerobic denitrification by a novel Halomonas campisalis

A novel halophilic strain that could carry out heterotrophic nitrification and aerobic denitrification was isolated and named as Halomonas campisalis ha3. It removed inorganic nitrogen compounds (e.g. NO₃ ^?, NO₂ ^? and NH₄ ⁺) simultaneously, and grew well in the medium containing up to 20 % (w/v) NaCl. PCR revealed four genes in the genome of ha3 related to aerobic denitrification: napA, nirS, norB and nosZ. The optimal conditions for aerobic denitrification were pH 9.0, at 37 °C, with 4 % (w/v) NaCl and sodium succinate as carbon source. The nitrogen removal rate was 87.5 mg NO₃ ^?–N l^?1 h^?1. Therefore, this strain is a potential aerobic denitrifier for the treatment of saline wastewater.     

Isolation, characterization, and in situ detection of a novel chemolithoautotrophic sulfur-oxidizing bacterium in wastewater biofilms growing under microaerophilic conditions

We successfully isolated a novel aerobic chemolithotrophic sulfur-oxidizing bacterium, designated strain SO07, from wastewater biofilms growing under microaerophilic conditions. For isolation, the use of elemental sulfur (S(0)), which is the most abundant sulfur pool in the wastewater biofilms, as the electron donor was an effective measure to establish an enrichment culture of strain SO07 and further isolation. 16S rRNA gene sequence analysis revealed that newly isolated strain SO07 was affiliated with members of the genus Halothiobacillus, but it was only distantly related to previously isolated species (89% identity). Strain SO07 oxidized elemental sulfur, thiosulfate, and sulfide to sulfate under oxic conditions. Strain SO07 could not grow on nitrate. Organic carbons, including acetate, propionate, and formate, could not serve as carbon and energy sources. Unlike other aerobic sulfur-oxidizing bacteria, this bacterium was sensitive to NaCl; growth in medium containing more than 150 mM was negligible. In situ hybridization combined with confocal laser scanning microscopy revealed that a number of rod-shaped cells hybridized with a probe specific for strain SO07 were mainly present in the oxic biofilm strata (ca. 0 to 100 micro m) and that they often coexisted with sulfate-reducing bacteria in this zone. These results demonstrated that strain SO07 was one of the important sulfur-oxidizing populations involved in the sulfur cycle occurring in the wastewater biofilm and was primarily responsible for the oxidation of H(2)S and S(0) to SO(4)(2-) under oxic conditions.     

Pyridine-2,6-Bis(Thiocarboxylic Acid) Produced by Pseudomonas stutzeri KC Reduces and Precipitates Selenium and Tellurium Oxyanions

The siderophore of Pseudomonas stutzeri KC, pyridine-2,6-bis(thiocarboxylic acid) (pdtc), is shown to detoxify selenium and tellurium oxyanions in bacterial cultures. A mechanism for pdtc's detoxification of tellurite and selenite is proposed. The mechanism is based upon determination using mass spectrometry and energy-dispersive X-ray spectrometry of the chemical structures of compounds formed during initial reactions of tellurite and selenite with pdtc. Selenite and tellurite are reduced by pdtc or its hydrolysis product H₂S, forming zero-valent pdtc selenides and pdtc tellurides that precipitate from solution. These insoluble compounds then hydrolyze, releasing nanometer-sized particles of elemental selenium or tellurium. Electron microscopy studies showed both extracellular precipitation and internal deposition of these metalloids by bacterial cells. The precipitates formed with synthetic pdtc were similar to those formed in pdtc-producing cultures of P. stutzeri KC. Culture filtrates of P. stutzeri KC containing pdtc were also active in removing selenite and precipitating elemental selenium and tellurium. The pdtc-producing wild-type strain KC conferred higher tolerance against selenite and tellurite toxicity than a pdtc-negative mutant strain, CTN1. These observations support the hypothesis that pdtc not only functions as a siderophore but also is involved in an initial line of defense against toxicity from various metals and metalloids.     

Isolation and initial characterization of the tellurite reducing moderately halophilic bacterium, Salinicoccus sp. strain QW6

Among the 49 strains of moderately halophilic bacteria isolated from the salty environments of Iran, a Gram-positive coccus designated as strain QW6 showed high capacity in the removal of toxic oxyanions of tellurium in a wide range of culture medium factors including pH (5.5-10.5), temperature (25-45 degrees C), various salts including NaCl, KCl, and Na(2)SO(4) (0.5-4M), selenooxyanions (2-10mM), and at different concentrations of potassium tellurite (0.5-1mM) under aerobic condition. Phenotypic characterization and phylogenetic analyses based on 16S rDNA sequence comparisons indicated that this strain was a member of the genus Salinicoccus. The maximum tellurite removal was exhibited in 1.5M NaCl at 35 degrees C, while the activity reduced by 53% and 47% at 25 and 45 degrees C, respectively. The optimum pH for removal activity was shown to be 7.5, with 90% and 83% reduced removal capacities at the two extreme values of 5.5 and 10, respectively. The impact of different concentrations of selenooxyanions (2-10mM) on tellurite removal by strain QW6 was evaluated. The ability of strain QW6 in the removal of tellurite in the presence of 6mM selenite increased by 25%. The concentration of toxic potassium tellurite in the supernatant of the bacterial culture medium decreased by 99% (from 0.5 to 0.005mM) after 6 days and the color of the medium changed to black due to the formation of less toxic elemental tellurium.     

Pyridine-2,6-bis(thiocarboxylic acid) produced by Pseudomonas stutzeri KC reduces and precipitates selenium and tellurium oxyanions

The siderophore of Pseudomonas stutzeri KC, pyridine-2,6-bis(thiocarboxylic acid) (pdtc), is shown to detoxify selenium and tellurium oxyanions in bacterial cultures. A mechanism for pdtc's detoxification of tellurite and selenite is proposed. The mechanism is based upon determination using mass spectrometry and energy-dispersive X-ray spectrometry of the chemical structures of compounds formed during initial reactions of tellurite and selenite with pdtc. Selenite and tellurite are reduced by pdtc or its hydrolysis product H(2)S, forming zero-valent pdtc selenides and pdtc tellurides that precipitate from solution. These insoluble compounds then hydrolyze, releasing nanometer-sized particles of elemental selenium or tellurium. Electron microscopy studies showed both extracellular precipitation and internal deposition of these metalloids by bacterial cells. The precipitates formed with synthetic pdtc were similar to those formed in pdtc-producing cultures of P. stutzeri KC. Culture filtrates of P. stutzeri KC containing pdtc were also active in removing selenite and precipitating elemental selenium and tellurium. The pdtc-producing wild-type strain KC conferred higher tolerance against selenite and tellurite toxicity than a pdtc-negative mutant strain, CTN1. These observations support the hypothesis that pdtc not only functions as a siderophore but also is involved in an initial line of defense against toxicity from various metals and metalloids.     

An effective method for the detoxification of cyanide-rich wastewater by Bacillus sp. CN-22

The biodetoxification of cyanide-rich wastewater has become increasingly popular because of its cost-effectiveness and environmental friendliness. Therefore, we have developed an effective method, optimised by response surface methodology, for detoxifying cyanide-rich wastewater using Bacillus sp. CN-22, which was newly isolated from a cyanide-contaminated electroplating sludge and could tolerate a CN^? concentration of 700 mg L^?1. The concentration of CN^? in the treated wastewater decreased from 200 to 6.62 mg L^?1 after cultivation with 2.38 % inocula for 72 h on the medium, consisting of 0.05 % KH₂PO₄, 0.15 % K₂HPO₄, 1.0 mM MgCl₂, 1.0 mM FeCl₃, 0.1 % NH₄Cl, and 0.1 % glycerol. The CN^? degradability of 96.69 % is similar to the predicted value of 96.82 %. The optimal cultivation conditions were controlled as follows: initial pH, 10.3; temperature, 31 °C; and rotary speed, 193 rpm. The maintenance of higher pH in the overall treatment procedures may avoid the production of volatile HCN and the risk associated with cyanide detoxification. Additionally, the bacterial strain Bacillus sp. CN-22, with its potent cyanide-degrading activity at the initial CN^– concentration of 200 mg L^?1, may be employed to effectively treat cyanide-rich wastewater, especially electroplating effluent.     

The influence of growth medium composition and physicochemical factors on biosurfactant production by the bacterium <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> VKM B-511

The ability of Bacillus licheniformis strain VKM B-511 to grow and synthesize biosurfactants under both aerobic and anaerobic conditions has been demonstrated. Yields of biosurfactants, emulsion indices and surface tension were considerably higher in culture liquor and preparations derived from cultures grown anaerobically at a C/N ratio of 1: 24, pH 7.0, and temperature of 30°C. Biosurfactant production by B. lichenformis also depended on concentrations of NaCl and Na₂S in the medium and on water characteristics, reaching 4.58 g/l for bacteria grown anaerobically on a medium containing anolyte fraction of water.     

Response of greenhouse tomato to salt stress and K+ supplement

Abstract

The effect of NaCl salinity and potassium supplement on growth, tissue ion concentration, photosynthesis, yield and fruit quality characteristics of tomato plants was studied. Tomato plants, hyb. Belladonna, were grown in 8.5 l pots, filled with 1:3 sand:perlite mixture and irrigated with a half-strength Hoagland solution through a closed hydroponic system. Six irrigation treatments were applied, including combinations of 3 salinity (0, 35 and 70 mM NaCl) and two potassium levels (K1: 200 ppm and K2: 400 ppm) in the nutrient solution. Salinity reduced photosynthesis resulting in reduced plant height and dry weight. Yield was reduced by 25% and 69% at 35 and 70 mM, respectively, as compared to control plants (0 mM NaCl). Both total soluble solids and titratable acidity of the fruit increased with increasing salinity and K levels. The application of high potassium level (K2) reduced the concentration of Na and increased that of K in the leaves and roots of the plants, as compared to K1 treatment. Toxicity symptoms were mostly observed in the leaves of 70K1 plants, while no visual symptoms of toxicity were observed in 70K2 treatment. Despite the positive effects of potassium supplement in reducing Na concentration and the absence of toxicity symptoms in the leaves, plant growth was not improved, while leaf photosynthesis was reduced. Furthermore, no positive effects in the percentage of marketable fruit, mean fruit weight and yield were observed in the plants receiving extra K.     

Spore associated bacteria of arbuscular mycorrhizal fungi improve maize tolerance to salinity by reducing ethylene stress level

The role of spore associated bacteria of arbuscular mycorrhizal fungi (AMF) in improving plant growth and alleviating salt stress is a potential area to explore. In the present study, 22 bacteria isolated from the spore walls of AMF were identified to contain 1-aminocyclopropane-1-carboxylate deaminase. These were tested for their ability to improve seed germination and alleviate salt stress in the early growth of maize. Among the isolates, 19 bacteria that were able to grow at 4?% NaCl were used for germination assay. Two bacteria and seven bacteria significantly improved maize seed germination at 100 mM NaCl and 200 mM NaCl, respectively. Based on the presence of plant growth promoting (PGP) characters and the ability to improve seed germination, five strains were chosen for further experiments. At 0 mM NaCl, all the strains were able to increase maize shoot and root growth significantly. At 25 mM NaCl, except for Bacillus aryabhattai S210B15, all the strains were able to increase shoot and root growth significantly. At 50 mM NaCl, Bacillus aryabhattai S110B3 and B. aryabhattai S210B15 significantly improved shoot length, whereas, Pseudomonas koreensis S2CB35 and B. aryabhattai S210B15 significantly increased root length. Although salinity increased ethylene production in maize, bacterial inoculation significantly reduced the ethylene level at 0, 25 and 50 mM NaCl. Among the five strains, only P. koreensis S2CB35 showed the presence of PGP functional traits of nifH, acdS and nodA genes.     

The Effect of pH and NaCl Levels on the Physicochemical and Emulsifying Properties of a Cruciferin Protein Isolate

The influence of pH (3.0, 5.0, and 7.0) and ionic strength (0, 50, 100 mM NaCl) on the physicochemical and emulsifying properties of a cruciferin-rich protein isolate (CPI) was investigated. Surface charge on the CPI was found to substantially reduced in the presence of NaCl. Surface hydrophobicity was found to be the lowest for CPI at pH 7.0 with 100 mM NaCl, and highest at pH 3.0 without NaCl. Solubility was found to be lowest at pH 5.0 and 7.0 without NaCl (<20 %), however greatly improved for all other pH and NaCl conditions (>80 %). Interfacial tension was found to be lowest at 10–11 mN/m for pH 5.0–0 mM NaCl and pH 7.0–50/100 mM NaCl, whereas under all other conditions interfacial tension was higher (15+ mN/m). Overall, NaCl has no effect on EAI at pH 3.0 where it ranged between 18.8 and 19.4 m²/g. At pH 5.0, EAI decreased from 21.1 to 12.8 m²/g as NaCl levels increased from 0 to 100 mM. At pH 7.0, EAI values were found to decrease from 14.9 to 5.2 m²/g as NaCl levels were raised from 0 to 100 mM. Overall, ESI was reduced with the addition of NaCl from ~15.7 min at 0 mM NaCl to ~11.6 min and ~12.0 min for the 50 and 100 mM NaCl levels, respectively.