From the rye Alt3 and Alt4 aluminum tolerance loci to orthologous genes in other cereals

The major limit to plant growth in acid soils is the presence of toxic aluminum (Al) cations, which limit growth by inhibiting root elongation. Aluminum tolerance in rye is controlled by (at least) four independent loci (Alt1, Alt2, Alt3 and Alt4) located on chromosome arms 6RS, 3RS, 4RL and 7RS, respectively. In this work, we analyzed several F₂ populations in which two different Alt loci were segregating. We constructed a map of chromosome 7R, which contains the Alt4 locus and microsatellite and PCR-markers (B1, B4, B11, B26 and BCD1230). These markers were mapped to the S arm of 7R using wheat-rye addition lines. Our results show that all these markers are linked to the Alt4 locus already known to be on 7RS. In addition, the OPS14 ₇₀₅ RAPD marker was linked to the Alt3 locus using bulked segregant analysis. This RAPD marker was transformed into a SCAR (ScOPS14 ₇₀₅ ) and was localized to arm 4RL using wheat-rye addition lines. Finally, this SCAR was linked to the Alt3 locus at a genetic distance of 23.4 cM. In light of the current findings, and taking into account the synteny relationships in cereals, we propose candidate Alt3 and Alt4 orthologues in other cereals.     

Development of RAPD and SCAR markers linked to the Russian wheat aphid resistance gene Dn2 in wheat

 RAPD (random amplified polymorphic DNA) analysis was used to identify molecular markers linked to the Dn2 gene conferring resistance to the Russian wheat aphid (Diuraphis noxia Mordvilko). A set of near-isogenic lines (NILs) was screened with 300 RAPD primers for polymorphisms linked to the Dn2 gene. A total of 2700 RAPD loci were screened for linkage to the resistance locus. Four polymorphic RAPD fragments, two in coupling phase and two in repulsion phase, were identified as putative RAPD markers for the Dn2 gene. Segregation analysis of these markers in an F₂ population segregating for the resistance gene revealed that all four markers were closely linked to the Dn2 locus. Linkage distances ranged from 3.3 cM to 4.4 cM. Southern analysis of the RAPD products using the cloned RAPD markers as probes confirmed the homology of the RAPD amplification products. The coupling-phase marker OPB10_880c and the repulsion-phase marker OPN1_400r were converted to sequence characterized amplified region (SCAR) markers. SCAR analysis of the F₂ population and other resistant and susceptible South African wheat cultivars corroborated the observed linkage of the RAPD markers to the Dn2 resistance locus. These markers will be useful for marker-assisted selection of the Dn2 gene for resistance breeding and gene pyramiding. Received: 1 July 1997 / Accepted: 20 October 1997     

AFLP markers tightly linked to the aluminum-tolerance gene Alt3 in rye (Secale cereale L.)

Rye (Secale cereale L.) is considered to be the most aluminum (Al)-tolerant species among the Triticeae. It has been suggested that aluminum tolerance in rye is controlled by three major genes (Alt genes) located on rye chromosome arms 3RL, 4RL, and 6RS, respectively. Screening of an F₆ rye recombinant inbred line (RIL) population derived from the cross between an Al-tolerant rye (M39A-1–6) and an Al-sensitive rye (M77A-1) showed that a single gene controls aluminum tolerance in the population analyzed. In order to identify molecular markers tightly linked to the gene, we used a combination of amplified fragment length polymorphism (AFLP) and bulked segregant analysis techniques to evaluate the F₆ rye RIL population. We analyzed approximately 22,500 selectively amplified DNA fragments using 204 primer combinations and identified three AFLP markers tightly linked to the Alt gene. Two of these markers flanked the Alt locus at distance of 0.4 and 0.7 cM. Chromosomal localization using cloned AFLP and a restriction fragment length polymorphism (RFLP) marker indicated that the gene was on the long arm of rye chromosome 4R. The RFLP marker (BCD1230) co-segregated with the Alt gene. Since the gene is on chromosome 4R, the gene was designated as Alt3. These markers are being used as a starting point in the construction of a high resolution map of the Alt3 region in rye. Received: 29 March 2000 / Accepted: 9 July 2001     

High-resolution mapping of the <Emphasis Type="Italic">Alp</Emphasis> locus and identification of a candidate gene <Emphasis Type="Italic">HvMATE</Emphasis> controlling aluminium tolerance in barley (<Emphasis Type="Italic">Hordeum vulgare</Emphasis> L.)

Aluminium (Al) tolerance in barley is conditioned by the Alp locus on the long arm of chromosome 4H, which is associated with Al-activated release of citrate from roots. We developed a high-resolution map of the Alp locus using 132 doubled haploid (DH) lines from a cross between Dayton (Al-tolerant) and Zhepi 2 (Al-sensitive) and 2,070 F₂ individuals from a cross between Dayton and Gairdner (Al-sensitive). The Al-activated efflux of citrate from the root apices of Al-tolerant Dayton was 10-fold greater than from the Al-sensitive parents Zhepi 2 and Gairdner. A suite of markers (ABG715, Bmag353, GBM1071, GWM165, HvMATE and HvGABP) exhibited complete linkage with the Alp locus in the DH population accounting 72% of the variation for Al tolerance evaluated as relative root elongation. These markers were used to map this genomic region in the Dayton/Gairdner population in more detail. Flanking markers HvGABP and ABG715 delineated the Alp locus to a 0.2 cM interval. Since the HvMATE marker was not polymorphic in the Dayton/Gairdner population we instead investigated the expression of the HvMATE gene. Relative expression of the HvMATE gene was 30-fold greater in Dayton than Gardiner. Furthermore, HvMATE expression in the F_2:3 families tested, including all the informative recombinant lines identified between HvGABP and ABG715 was significantly correlated with Al tolerance and Al-activated citrate efflux. These results identify HvMATE, a gene encoding a multidrug and toxic compound extrusion protein, as a candidate controlling Al tolerance in barley.     

Development of SCAR markers linked to the gene Or5 conferring resistance to broomrape (Orobanche cumana Wallr.) in sunflower

A consensus molecular linkage map of 61.9 cM containing the Or5 gene, which confers resistance to race E of broomrape orobanche cumana, five SCAR markers (three dominant, two codominant) and one RAPD marker were identified based on segregation data scored from two F₂ populations of susceptible×resistant sunflower line crosses. Bulked segregant analysis was carried out to generate the five SCAR markers, while the single RAPD marker in the group was identified from 61 segregating RAPD markers that were directly screened on one of the two F₂ populations. The five SCAR markers, RTS05, RTS28, RTS40, RTS29 and RTS41, were significantly (LOD≥4.0) linked to the Or5 gene and mapped separately at 5.6, 13.6, 14.1, 21.4 and 39.4 cM from the Or5 locus on one side, while the RAPD marker, UBC120_660, was found at 22.5 cM (LOD=1.4) on the opposite side. These markers should facilitate the efficient transfer of the resistance gene among sunflower breeding lines. As the first report on molecular markers linked to a broomrape resistance gene, the present work provides a starting point to study other genes and to examine the hypothesis of the clustering of broomrape resistance genes in sunflower. Received: 16 September 1998 / Accepted: 22 June 1999     

Genetic control of aluminium tolerance in rye (Secale cereale L.)

 Aluminium (Al) tolerance in roots of two cultivars (“Ailés” and “JNK”) and two inbred lines (“Riodeva” and “Pool”) of rye was studied using intact roots immersed in a nutrient solution at a controlled pH and temperature. Both the cultivars and the inbred lines analysed showed high Al tolerance, this character being under multigenic control. The inbred line “Riodeva” was sensitive (non-telerant) at a concentration of 150 μM, whereas the “Ailes” cultivar showed the highest level of Al tolerance at this concentration. The segregation of aluminium-tolerance genes and several isozyme loci in different F₁s, F₂s and backcrosses between plants of “Ailés” and “Riodeva” were also studied. The segregation ratios obtained for aluminium tolerance in the F₂s analysed were 3 : 1 and 15 : 1 (tolerant : non-tolerant) while in backcrosses they were 1 : 1 and 3 : 1. These results indicated that Al tolerance is controlled by, at least, two major dominant and independent loci in rye (Alt1 and Alt3). Linkage analyses carried out between Al-tolerance genes and several isozyme loci revealed that the Alt1 locus was linked to the aconitase-1 (Aco1), nicotinamide adenine dinucleotide dehydrogenase-2 (Ndh2), esterase-6 (Est6) and esterase-8 (Est8) loci, located on chromosome arm 6RL. The order obtained was Alt1-Aco1-Ndh2-Est6-Est8. The Alt3 locus was not linked to the Lap1, Aco1 and Ndh2 loci, located on chromosome arms, 6RS, 6RL and 6RL respectively. Therefore, the Alt3 locus is probably on a different chromosome. Received: 18 March 1997 / Accepted: 21 March 1997     

Chromosomal location of PCR fragments as a source of DNA markers linked to aluminium tolerance genes in rye

 To identify and locate rye DNA sequences homologous to three wheat c-DNAs (wali1, wali2 and wali5) whose expression is induced by aluminium (Al) stress, we designed three pairs of specific primers. They were used in the amplification of genomic DNA from wheat-rye disomic addition lines. The wali2 pair of primers amplified a 878-bp rye DNA fragment (rali2) located on chromosomes 4R and 7R that showed 79.37% homology with the corresponding wheat c-DNA. RAPD fragments were also used as genetic markers. We located 22 different RAPDs distributed on 11 different rye chromosome arms using wheat-rye disomic and ditelocentric addition lines. Thirteen of these markers were located on the chromosomes 3R, 4R and 6R, which also carry aluminium-tolerance genes. The OPA08 ₄₁₅ and OPR01 ₆₀₀ RAPD markers, located on the 6RL and 6RS chromosome arms, respectively, were converted to SCAR markers (SCA08 ₄₁₅ and SCR01 ₆₀₀ ) and linked to Alt1 gene (SCR01 ₆₀₀ -2.1 cM-Alt1-33.5 cM-SCA08 ₄₁₅ ). We propose that the chromosomal location of RAPDs and SCARs using wheat-rye addition lines is a source of DNA markers linked to aluminium-tolerance loci and offers a valuable strategy in marker-assisted selection for the introgression of tolerance genes in wheat. Received: 9 June 1997 / Accepted: 19 September 1997     

Genetic structure and diversity of European flint maize populations determined with SSR analyses of individuals and bulks

Characterization and manipulation of aluminum (Al) tolerance genes offers a solution to Al toxicity problems in crop cultivation on acid soil, which composes approximately 40% of all arable land. By exploiting the rice (Oryza sativa L.)/rye (Secale cereale L.) syntenic relationship, the potential for map-based cloning of genes controlling Al tolerance in rye (the most Al-tolerant cereal) was explored. An attempt to clone an Al tolerance gene (Alt3) from rye was initiated by using DNA markers flanking the rye Alt3 gene, from many cereals. Two rice-derived, PCR-based markers flanking the Alt3 gene, B1 and B4, were used to screen 1,123 plants of a rye F₂ population segregating for Alt3. Fifteen recombinant plants were identified. Four additional RFLP markers developed from rice genes/putative genes, spanning 10 kb of a 160-kb rice BAC, were mapped to the Alt3 region. Two rice markers flanked the Alt3 locus at a distance of 0.05 cM, while two others co-segregated with it. The rice/rye micro-colinearity worked very well to delineate and map the Alt3 gene region in rye. A rye fragment suspected to be part of the Alt3 candidate gene was identified, but at this level, the rye/rice microsynteny relationship broke down. Because of sequence differences between rice and rye and the complexity of the rye sequence, we have been unable to clone a full-length candidate gene in rye. Further attempts to clone a full-length rye Alt3 candidate gene will necessitate the creation of a rye large-insert library.     

Detection and mapping of SSRs in rye ESTs from aluminium-stressed roots

Aluminium toxicity is a major problem for crop production on acid soils. Rye (Secale cereale L.) has one of the most efficient group of genes for aluminium tolerance, at least, four independent and dominant loci, Alt1, Alt2, Alt3 and Alt4, located on chromosome arms 6RS, 3RS, 4RL and 7RS, have been described. The increasing availability of expressed sequence tags in rye and related cereals provides a valuable resource of non-anonymous DNA molecular markers. In order to obtain simple sequence repeat (SSR) markers related with Al tolerance more than 1,199 public accessible rye cDNA sequences from Al-stressed roots were exploited as a resource for SSR markers development. From a total of 21 S. cereale microsatellite (SCM) loci analysed, 12 were located on chromosomes 1R, 2R, 3R, 4R and 5R, using wheat–rye addition lines or mapped using a F₂ population segregating for Al tolerance. Seven SCM loci were included in a rye map with other SCIM and RAPD markers. Moreover, 14 SCM loci could be associated to proteins with known or unknown function. The possible implications of these sequences in aluminium tolerance mechanisms are discussed.     

Identification of AFLP markers linked to the male fertility restorer gene of CMS (Moricandia arvensis) Brassica juncea and conversion to SCAR marker

We have developed a cytoplasmic male sterile (CMS) line of Brassica juncea through somatic hybridization with Moricandia arvensis and introgressed the fertility restorer gene into B. juncea. This fertility restorer locus is unique in that it is capable of restoring male fertility to two other alloplasmic CMS systems of B. juncea. As a first step toward cloning of this restorer gene we attempted molecular tagging of the Rf locus using the amplified fragment length polymorphism (AFLP) technique. A BC₁F₁ population segregating for male sterility/fertility was used for tagging using the bulk segregant analysis method. Out of 64 primer combinations tested in the bulks, 5 combinations gave polymorphic amplification patterns. Further testing of these primers in individual plants showed four amplicons associated with the male fertility trait. Polymorphic amplicons were cloned and used for designing SCAR primers. One of the SCAR primers generated amplicons mostly in the fertile plants. Linkage analysis using MAPMAKER showed two AFLP and one SCAR markers linked to the male fertility gene with a map distance ranging from 0.6 to 2.9 cM. All the markers are located on one side of the Rf locus.     

Molecular mapping of <Emphasis Type="Italic">Stb1</Emphasis>, a potentially durable gene for resistance to septoria tritici blotch in wheat

Septoria tritici blotch (STB), caused by the ascomycete Mycosphaerella graminicola (anamorph Septoria tritici), was the most destructive disease of wheat in Indiana and adjacent states before deployment of the resistance gene Stb1 during the early 1970s. Since then, Stb1 has provided durable protection against STB in widely grown wheat cultivars. However, its chromosomal location and allelic relationships to most other STB genes are not known, so the molecular mapping of Stb1 is of great interest. Genetic analyses and molecular mapping were performed for two mapping populations. A total of 148 F₁ plants (mapping population I) were derived from a three-way cross between the resistant line P881072-75-1 and the susceptible lines P881072-75-2 and Monon, and 106 F₆ recombinant-inbred lines (mapping population II) were developed from a cross between the resistant line 72626E2-12-9-1 and the susceptible cultivar Arthur. Bulked-segregant analysis with random amplified polymorphic DNA (RAPD), amplified fragment length polymorphism (AFLP), and microsatellite or simple-sequence repeat (SSR) markers was conducted to identify those that were putatively linked to the Stb1 gene. Segregation analyses confirmed that a single dominant gene controls the resistance to M. graminicola in each mapping population. Two RAPD markers, G7₁₂₀₀ and H19₅₂₀, were tightly linked to Stb1 in wheat line P881072-75-1 at distances of less than 0.68 cM and 1.4 cM, respectively. In mapping population II, the most closely linked marker was SSR Xbarc74, which was 2.8 cM proximal to Stb1 on chromosome 5BL. Microsatellite loci Xgwm335 and Xgwm213 also were proximal to Stb1 at distances of 7.4 cM and 8.3 cM, respectively. The flanking AFLP marker, EcoRI-AGC/MseI-CTA-1, was 8.4 cM distal to Stb1. The two RAPD markers, G7₁₂₀₀ and H19₅₂₀, and AFLP EcoRI-AGC/MseI-CTA-1, were cloned and sequenced for conversion into sequence-characterized amplified region (SCAR) markers. Only RAPD allele H19₅₂₀ could be converted successfully, and none of the SCAR markers was diagnostic for the Stb1 locus. Analysis of SSR and the original RAPD primers on several 5BL deletion stocks positioned the Stb1 locus in the region delineated by chromosome breakpoints at fraction lengths 0.59 and 0.75. The molecular markers tightly linked to Stb1 could be useful for marker-assisted selection and for pyramiding of Stb1 with other genes for resistance to M. graminicola in wheat.     

Aluminum Tolerance in Wheat (Triticum aestivum L.) (II. Aluminum-Stimulated Excretion of Malic Acid from Root Apices)

We investigated the role of organic acids in conferring Al tolerance in near-isogenic wheat (Triticum aestivum L.) lines differing in Al tolerance at the Al tolerance locus (Alt1). Addition of Al to nutrient solutions stimulated excretion of malic and succinic acids from roots of wheat seedlings, and Al-tolerant genotypes excreted 5- to 10-fold more malic acid than Al-sensitive genotypes. Malic acid excretion was detectable after 15 min of exposure to 200 [mu]M Al, and the amount excreted increased linearly over 24 h. The amount of malic acid excreted was dependent on the external Al concentration, and excretion was stimulated by as little as 10 [mu]M Al. Malic acid added to nutrient solutions was able to protect Al-sensitive seedlings from normally phytotoxic Al concentrations. Root apices (terminal 3-5 mm of root) were the primary source of the malic acid excreted. Root apices of Al-tolerant and Al-sensitive seedlings contained similar amounts of malic acid before and after a 2-h exposure to 200 [mu]M Al. During this treatment, Al-tolerant seedlings excreted about four times the total amount of malic acid initially present within root apices, indicating that continual synthesis of malic acid was occurring. Malic acid excretion was specifically stimulated by Al, and neither La, Fe, nor the absence of Pi was able to elicit this response. There was a consistent correlation of Al tolerance with high rates of malic acid excretion stimulated by Al in a population of seedlings segregating for Al tolerance. These data are consistent with the hypothesis that the Alt1 locus in wheat encodes an Al tolerance mechanism based on Al-stimulated excretion of malic acid.     

RAPD and SCAR markers linked to the Ma1 root-knot nematode resistance gene in Myrobalan plum (Prunus cerasifera Ehr.)

 The Myrobalan plum (Prunus cerasifera) is a self-incompatible species in which the clones P.2175, P.1079 and P.2980 are highly resistant to all root-knot nematodes (RKN), Meloidogyne spp. Each clone bears a single major dominant gene, designated Ma1, Ma2 and Ma3 respectively, that controls a high and wide-spectrum resistance. Bulked segregant analysis (BSA) and random amplified polymorphic DNA (RAPD) analysis were both performed to detect markers linked to the Ma1 gene using three segregating progenies from P.2175 (Ma1 ma1) crossed by three host parents (ma1 ma1). Four dominant coupling-phase markers were identified from a total of 660 10-base primers tested. The resulting linkage map spans 14.7 cM and comprises three markers located on the same side of Ma1 and one marker located on the other side. The nearest markers (OPAL19₇₂₀ and OPA16₁₄₀₀) are located at 3.7 and 6.7 cM, respectively, on each side of the gene. Among the three markers that could be successfully converted into sequence characterized amplified region (SCAR) markers, two of them (SCAL19₆₉₀ and SCAN12₆₂₀) were scored as dominant markers whereas the third (SCAO19₇₇₀) failed to produce any polymorphism. SCAL19, and to a lesser extent SCAN12, can be used reliably in the marker-assisted selection of Prunus rootstocks. These markers are adequate to identify the Ma1 RKN resistance gene in intraspecific segregating progenies and will be suitable for the creation of interspecific rootstocks involving Myrobalan plum. Some of the RAPD and SCAR markers for Ma1 were also recovered in clones P.1079 and P.2980, but not in additional host clones, suggesting that Ma1, Ma2 and Ma3 are either allelic or at least closely linked. Received: 22 September 1998 / Accepted: 19 December 1998     

Molecular markers for rust and pyricularia leaf spot disease resistance in pearl millet

 Pearl millet [Pennisetum glaucum (L.) R.Br.] is a warm-season grass used for food, feed, fodder and forage, primarily in countries of Africa and India but grown around the world. The two most-destructive diseases to pearl millet in the United States are rust (caused by Puccinia substriata var. indica) and pyricularia leaf spot (caused by Pyricularia grisea). Genes for disease resistance to both pathogens have been transferred into agronomically acceptable forage and grain cultivars. A study was undertaken to identify molecular markers for three rust loci and one pyricularia resistance locus. Three segregating populations were screened for RAPDs using random decamer primers and for RFLPs using a core set of probes detecting single-copy markers on the pearl millet map. The rust resistance gene Rr ₁ from the pearl millet subspecies P. glaucum ssp. monodii was linked 8.5 cM from the RAPD OP-G8₃₅₀. The linkage of two RFLP markers, Xpsm108 (15.5 cM) and Xpsm174 (17.7 cM), placed the Rr ₁ gene on linkage-group 3 of the pearl millet map. Rust resistance genes from both Tift 89D₂ and ICMP 83506 were placed on linkage-group 4 by determining genetic linkage to the RFLP marker Xpsm716 (4.9 and 0.0 cM, respectively). Resistance in ICMP 83506 was also linked to the RFLP marker Xpsm306 (10.0 cM), while resistance in Tift 89D₂ was linked to RAPD markers OP-K19₃₅₀ (8.8 cM) and OP-O8₃₅₀ (19.6 cM). Fragments from OP-K19 and OP-O8 in the ICMP 83506 population, and Xpsm306 in the Tift 89D₂ population, were monomorphic. Only one RAPD marker (OP-D11₇₀₀, 5.6 cM) was linked to pyricularia leaf spot resistance. Attempts to detect polymorphisms with rice RFLP probes linked to rice blast resistance (Pyricularia oryzae; syn=P. grisea) were unsuccessful. Received: 19 May 1997 / Accepted: 21 October 1997     

A new aluminum tolerance gene located on rye chromosome arm 7RS

Rye has one of the most efficient groups of genes for aluminum tolerance (Alt) among cultivated species of Triticeae. This tolerance is controlled by, at least, three independent and dominant loci (Alt1, Alt2, and Alt3) located on chromosome arms 6RS, 3RS, and 4RL, respectively. The segregation of Alt genes and several random amplified polymorphic DNA (RAPD), Secale cereale inter-microsatellite (SCIM), and Secale cereale microsatellite (SCM) markers in three F(2) between a tolerant cultivar (Ailés) and a non-tolerant inbred line (Riodeva) were studied. The segregation ratio obtained for aluminum tolerance in the three F(2) populations analyzed was 3:1 (tolerant:non-tolerant), indicating that tolerance is controlled by one dominant locus. SCIM811(1376) was linked to an Alt gene in the three F(2) populations studied, and three different SCIMs and one RAPD (SCIM811(1376), SCIM812(626), SCIM812(1138), and OPQ4(725)) were linked to the Alt gene in two F(2) populations. This result indicated that the same Alt gene was segregating in the three crosses. SCIM819(1434) and OPQ4(578) linked to the tolerance gene in one F(2) population were located using wheat-rye ditelosomic addition lines on the 7RS chromosome arm. The Alt locus is mapped between SCIM819(1434) and the OPQ4(578) markers. Two microsatellite loci (SCM-40 and SCM-86), previously located on chromosome 7R, were also linked to the Alt gene. Therefore, the Alt gene segregating in these F(2) populations is new and probably could be orthologous to the Alt genes located on wheat chromosome arm 4DL, on barley chromosome arm 4HL, on rye chromosome arm 4RL, and rice chromosome 3. This new Alt gene located on rye chromosome arm 7RS was named Alt4. A map of rye chromosome 7R with the Alt4 gene, 16 SCIM and RAPD, markers and two SCM markers was obtained.     

Construction of an RFLP linkage map for cultivated sunflower

 An RFLP linkage map was constructed for cultivated sunflower Helianthus annuus L., based on 271 loci detected by 232 cDNA probes. Ninety-three F₂ plants of a cross between inbred lines RHA 271 and HA 234 were used as the mapping population. These genetic markers plus a fertility restoration gene, Rf ₁, defined 20 linkage groups, covering 1164 cM of the sunflower genome. Of the 71 loci 202 had codominant genotypic segregation, with the rest showing dominant segregation. Thirty-two of the 232 probes gave multiple locus segregation. There were 39 clusters of tightly linked markers with 0 cM distance among loci. This map has an average marker-to-marker distance of 4.6 cM, with 11 markerless regions exceeding 20 cM. Received: 17 June 1997 / Accepted: 19 June 1997     

Marker-assisted selection for two rust resistance genes in sunflower

In this study we report on the identification of molecular markers, OX20₆₀₀ and OO04₉₅₀, linked to the geneR _Adv in the proprietary inbred line P2. This gene confers resistance to most of the pathotypes of Puccinia helianthi identified in Australia. Analysis indicates these RAPD markers are linked to the resistance locus at 0.0 cM and 11 cM respectively. SCAR markers SCX20₆₀₀ and SCO04₉₅₀ derived from these two RAPD markers, and SCT06₉₅₀ derived from a previously reported RAPD marker linked at 4.5 cM from the R ₁ rust resistance gene were developed. SCX20₆₀₀ and SCO04₉₅₀ were linked at similar distances from their resistance locus as the RAPD markers. SCTO6₉₅₀ co-segregated completely with rust resistance. The robustness of the R ₁ SCAR marker was demonstrated through the amplification of the marker in a diverse range of sunflower germplasm considered to possess the R ₁ gene. The SCAR markers forR _Adv were not amplified in the sunflower rust differential set thereby supporting the contention that this is a novel resistance gene. They did amplify in a number of proprietary lines closely related to the line P2. This locus is under further investigation as it will be useful in our attempts to use molecular-assisted breeding to produce durable resistance in sunflower to P. helianthi.     

RAPD markers linked to eastern filbert blight resistance in<Emphasis Type="Italic"> Corylus avellana</Emphasis>

A total of 1,110 decamer primers were screened for RAPD markers linked to a dominant allele in hazelnut (Corylus avellana) that confers resistance to eastern filbert blight caused by Anisogramma anomala. Twenty RAPD markers linked in coupling, and five markers linked in repulsion, were found. A seedling population was used to construct a linkage map of the region flanking the resistance locus. The map spans 46.6 cM, with 14 markers on one side of the resistance locus and eight on the other side. Eleven markers showed less than 3% recombination with resistance, including three that showed no recombination. Seven of these 11 markers are sufficiently robust to allow their use in marker-assisted selection. These include AA12₈₅₀ which shows no recombination, and six markers on one side of the resistance locus: 173₅₀₀, 152₈₀₀, 122₈₂₅, 275₁₁₃₀, H19₆₅₀ and O16₁₂₅₀. Marker 268₅₈₀, which flanks the resistance locus on the other side, is also suitable for use in marker-assisted selection, but shows 5.8% recombination with resistance. Other markers are less suitable for marker-assisted selection because of sensitivity to changes in primer or MgCl₂ concentration, or the long time required for electrophoresis to separate bands of similar size. The 16 markers closest to the resistance locus were cloned and sequenced. The W07₃₆₅ marker, which showed no recombination with the resistance locus but is difficult to score, includes a CT microsatellite repeat. The sequence information will allow the design of SCAR primers and eventual map-based cloning of the resistance allele.Communicated by D.B. Neale     

Development of SCAR markers linked to male sterility and very high linoleic acid content in safflower

Practically no molecular tools have been developed so far for safflower (Carthamus tinctorius L.) breeding. The objective of the present research was to develop molecular markers for the closely linked genes Li, controlling very high linoleic acid content, and Ms, controlling nuclear male sterility (NMS). A mapping population of 162 individuals was developed from the NMS line CL1 (64–79% linoleic acid) and the line CR-142 (84–90%), and phenotyped in the F₂ and F₃ generations. Bulked segregant analysis with random amplified polymorphic (RAPD) markers revealed linkage of five RAPD bands to the Li and Ms genes. RAPD fragments were converted into sequence-characterized amplified region (SCAR) markers. A linkage map including the five SCAR markers and the Li and Ms genes was constructed. SCAR markers flanked both loci at minimum distances of 15.7 cM from the Li locus and 3.7 cM from the Ms locus. These are the first molecular markers developed for trait selection in safflower.     

SCAR and CAPS mapping of CRb, a gene conferring resistance to Plasmodiophora brassicae in Chinese cabbage ( Brassica rapa ssp. pekinensis)

Clubroot disease, caused by Plasmodiophora brassicae Wor., is highly damaging for Chinese cabbage. The CR (clubroot resistant) Shinki DH (doubled haploid) line of Chinese cabbage carries a single dominant gene, CRb, which confers resistance to the P. brassicae races 2, 4, and 8. An F₂ population derived from a cross between the CR Shinki DH line and a susceptible line, 94SK, was used to map the CRb gene. Inoculation of F₃ families with SSI (single-spore isolate) resulted in a 1:2:1 segregation ratio. Use of the AFLP technique combined with bulked segregant analysis allowed five co-dominant AFLP markers, and four and seven dominant AFLP markers linked in coupling and repulsion, respectively, to be identified. Six of the 16 AFLP markers showing low frequencies of recombination with the CRb locus among 138 F₂ lines were cloned. A reliable conversion procedure allowed five AFLP markers to be successfully converted into CAPS and SCAR markers. An F₂ population (143 plants) was analyzed with these markers and a previously identified SCAR marker, and a genetic map around CRb covering a total distance of 6.75 cM was constructed. One dominant marker, TCR09, was located 0.78 cM from CRb. The remaining markers (TCR05, TCR01, TCR10, TCR08, and TCR03) were located on the other side of CRb, and the nearest of these was TCR05, at a distance of 1.92 cM.Communicated by R. Hagemann