几种新型植物基因表达载体的构建方法

利用基因工程技术手段研究基因功能过程中,构建基因表达载体处于转基因植物的主导地位,采用合适的构建方法会使实验效果事半功倍。植物基因表达载体的构建方法除了传统构建法、Gateway技术、三段T-DNA法、一步克隆法等,还有近年来出现的几种新型的载体构建方法:基于竞争性连接原理快速构建小片段基因表达载体;MicroRNA前体PCR置换法适用于构建小分子RNA表达载体;重组融合PCR法特别适用于插入片段中含有较多限制性酶切位点的载体构建;利用In-Fusion试剂盒可以将任何目的片段插入一个线性化载体的某个区域;构建多片段复杂载体可采用不依赖序列和连接的克隆方法(Sequence and ligation-independent cloning,SLIC)法;Gibson等温拼接法;Golden Gate拼接法。本文将在总结分析前人工作的基础上,结合自己工作的体会和经验分析这7种新方法的特点,期望通过这几种新的方法给植物基因工程表达载体的构建提供新的思路。     

An Alternative Method to Facilitate cDNA Cloning for Expression Studies in Mammalian Cells by Introducing Positive Blue White Selection in Vaccinia Topoisomerase I-Mediated Recombination

One of the most basic techniques in biomedical research is cDNA cloning for expression studies in mammalian cells. Vaccinia topoisomerase I-mediated cloning (TOPO cloning by Invitrogen) allows fast and efficient recombination of PCR-amplified DNAs. Among TOPO vectors, a pcDNA3.1 directional cloning vector is particularly convenient, since it can be used for expression analysis immediately after cloning. However, I found that the cloning efficiency was reduced when RT-PCR products were used as inserts (about one-quarter). Since TOPO vectors accept any PCR products, contaminating fragments in the insert DNA create negative clones. Therefore, I designed a new mammalian expression vector enabling positive blue white selection in Vaccinia topoisomerase I–mediated cloning. The method utilized a short nontoxic LacZα peptide as a linker for GFP fusion. When cDNAs were properly inserted into the vector, minimal expression of the fusion proteins in E. coli (harboring lacZΔM15) resulted in formation of blue colonies on X-gal plates. This method improved both cloning efficiency (75%) and directional cloning (99%) by distinguishing some of the negative clones having non-cording sequences, since these inserts often disturbed translation of lacZα. Recombinant plasmids were directly applied to expression studies using GFP as a reporter. Utilization of the P2A peptide allowed for separate expression of GFP. In addition, the preparation of Vaccinia topoisomerase I-linked vectors was streamlined, which consisted of successive enzymatic reactions with a single precipitation step, completing in 3 hr. The arrangement of unique restriction sites enabled further modification of vector components for specific applications. This system provides an alternative method for cDNA cloning and expression in mammalian cells.     

One step construction of PCR mutagenized libraries for genetic analysis by recombination cloning

Recombination cloning encompasses a set of technologies that transfer gene sequences between vectors through site-specific recombination. Due in part to the instability of linear DNA in bacteria, both the initial capture and subsequent transfer of gene sequences is often performed using purified recombination enzymes. However, we find linear DNAs flanked by loxP sites recombine efficiently in bacteria expressing Cre recombinase and the lambda Gam protein, suggesting Cre/lox recombination of linear substrates can be performed in vivo. As one approach towards exploiting this capability, we describe a method for constructing large (>1 × 10⁶ recombinants) libraries of gene mutations in a format compatible with recombination cloning. In this method, gene sequences are cloned into recombination entry plasmids and whole-plasmid PCR is used to produce mutagenized plasmid amplicons flanked by loxP. The PCR products are converted back into circular plasmids by transforming Cre/Gam-expressing bacteria, after which the mutant libraries are transferred to expression vectors and screened for phenotypes of interest. We further show that linear DNA fragments flanked by loxP repeats can be efficiently recombined into loxP-containing vectors through this same one-step transformation procedure. Thus, the approach reported here could be adapted as general cloning method.     

The Mode of Replication Is a Major Factor in Segregational Plasmid Instability in Lactococcus lactis

The effects of the rolling-circle and theta modes of replication on the maintenance of recombinant plasmids in Lactococcus lactis were studied. Heterologous Escherichia coli or bacteriophage λ DNA fragments of various sizes were inserted into vectors based on either the rolling-circle-type plasmid pWV01 or the theta-type plasmid pAMβ1. All pAMβ1 derivatives were stably maintained. pWV01 derivatives, however, showed size-dependent segregational instability, in particular when large DNA fragments were inserted. All recombinant pWV01 derivatives generated high-molecular-weight plasmid multimers (HMW) in amounts that were positively correlated with plasmid size and inversely correlated with the copy numbers of the monomeric plasmid forms. Formation of HMW or reductions in copy numbers were not observed with pAMβ1 derivatives. The results indicate that HMW formation and/or reduction in plasmid copy numbers is an important factor in the maintenance of pWV01 derivatives. It is concluded that theta-type plasmids are superior to rolling-circle-type plasmids for cloning in lactococci.     

Direct cloning of cDNA inserts from λgt11 phage DNA into a plasmid vector by a novel and simple method

Bacteriophage λgt11 has been used quite extensively for producing cDNA libraries. The cDNA inserts are usually subcloned into a plasmid vector for large scale production and analysis. However, isolating the recombinant DNA of interest from the phage clones can be a tedious task. Since the E. coli strain Y1088 used for λgt11 phage infection carries a pBR322-derived plasmid endogenously, we reasoned that this endogenous plasmid could be used directly for cloning the cDNA phage insert. In this report, we describe a method in which cDNA inserts from λgt11 phage were cloned directly into the pBR322 plasmid vector, by-passing the time-consuming procedures of preparing plasmid DNA as a subcloning vector. This method is likely to be extended to the cloning of DNA inserts derived from other phage λ vectors when bacteria containing endogenous pBR322 are used as host cells.     

Optimal Cloning of PCR Fragments by Homologous Recombination in Escherichia coli

PCR fragments and linear vectors containing overlapping ends are easily assembled into a propagative plasmid by homologous recombination in Escherichia coli. Although this gap-repair cloning approach is straightforward, its existence is virtually unknown to most molecular biologists. To popularize this method, we tested critical parameters influencing the efficiency of PCR fragments cloning into PCR-amplified vectors by homologous recombination in the widely used E. coli strain DH5α. We found that the number of positive colonies after transformation increases with the length of overlap between the PCR fragment and linear vector. For most practical purposes, a 20 bp identity already ensures high-cloning yields. With an insert to vector ratio of 2:1, higher colony forming numbers are obtained when the amount of vector is in the range of 100 to 250 ng. An undesirable cloning background of empty vectors can be minimized during vector PCR amplification by applying a reduced amount of plasmid template or by using primers in which the 5′ termini are separated by a large gap. DpnI digestion of the plasmid template after PCR is also effective to decrease the background of negative colonies. We tested these optimized cloning parameters during the assembly of five independent DNA constructs and obtained 94% positive clones out of 100 colonies probed. We further demonstrated the efficient and simultaneous cloning of two PCR fragments into a vector. These results support the idea that homologous recombination in E. coli might be one of the most effective methods for cloning one or two PCR fragments. For its simplicity and high efficiency, we believe that recombinational cloning in E. coli has a great potential to become a routine procedure in most molecular biology-oriented laboratories.     

Hot Fusion: An Efficient Method to Clone Multiple DNA Fragments as Well as Inverted Repeats without Ligase

Molecular cloning is utilized in nearly every facet of biological and medical research. We have developed a method, termed Hot Fusion, to efficiently clone one or multiple DNA fragments into plasmid vectors without the use of ligase. The method is directional, produces seamless junctions and is not dependent on the availability of restriction sites for inserts. Fragments are assembled based on shared homology regions of 17–30 bp at the junctions, which greatly simplifies the construct design. Hot Fusion is carried out in a one-step, single tube reaction at 50°C for one hour followed by cooling to room temperature. In addition to its utility for multi-fragment assembly Hot Fusion provides a highly efficient method for cloning DNA fragments containing inverted repeats for applications such as RNAi. The overall cloning efficiency is in the order of 90–95%.     

Vectors for co-expression of an unrestricted number of proteins

A vector system is presented that allows generation of E. coli co-expression clones by a standardized, robust cloning procedure. The number of co-expressed proteins is not limited. Five ‘pQLink’ vectors for expression of His-tag and GST-tag fusion proteins as well as untagged proteins and for cloning by restriction enzymes or Gateway cloning were generated. The vectors allow proteins to be expressed individually; to achieve co-expression, two pQLink plasmids are combined by ligation-independent cloning. pQLink co-expression plasmids can accept an unrestricted number of genes. As an example, the co-expression of a heterotetrameric human transport protein particle (TRAPP) complex from a single plasmid, its isolation and analysis of its stoichiometry are shown. pQLink clones can be used directly for pull-down experiments if the proteins are expressed with different tags. We demonstrate pull-down experiments of human valosin-containing protein (VCP) with fragments of the autocrine motility factor receptor (AMFR). The cloning method avoids PCR or gel isolation of restriction fragments, and a single resistance marker and origin of replication are used, allowing over-expression of rare tRNAs from a second plasmid. It is expected that applications are not restricted to bacteria, but could include co-expression in other hosts such as Bacluovirus/insect cells.     

Plasmid vector for cloning in Streptococcus pneumoniae and strategies for enrichment for recombinant plasmids

A new plasmid, pLS101, was constructed for use as a vector for cloning in Streptococcus pneumoniae. This plasmid carries two selectable genes, tet and malM, each of which contains two or more restriction sites for cloning. Insertional inactivation of the malM gene allowed direct selection of TcRMal- clones containing recombinant plasmids. Other means of enriching a recipient population for cells containing recombinant plasmids were examined. The effect of removing vector terminal phosphate in attempts to clone heterogeneous DNA fragments, such as those from chromosomal DNA, was to abolish recombinant plasmid establishment altogether, presumably because donor DNA processing during entry into the cell prevented establishment of the hemiligated molecule. However, with homogeneous DNA fragments, such as those from plasmid or viral DNA, vector phosphate removal allowed enrichment for recombinant plasmids. In the cloning of heterogeneous DNA that was homologous to the recipient chromosome (i.e. chromosomal DNA from S. pneumoniae), recovery of recombinant plasmids could be enriched tenfold (relative to the regenerated vector) by the process of chromosomal facilitation of plasmid establishment. This involved an additional passage of the mixed plasmids in which interaction with the chromosome of plasmids containing chromosomal DNA inserts (i.e. recombinant plasmids) increased their frequency of establishment relative to the vector plasmid. An overall strategy for cloning in S. pneumoniae, depending on the nature of the fragment to be cloned, is proposed.     

Cloning of genetic material in Bacillus

Plasmid vectors capable for propagation of Bacillus subtilis DNA fragments containing riboflavin genes were constructed. Cloning of rib operon using pUB110 derivatives was performed in recE4 strain by using sequentional rescue of plasmids containing subfragments of the operon. Also, rib operon was cloned on the vectors containing DNA repeats. It was shown that the presence of direct and inverted repeats within plasmids allows to transform B. subtilis cells by monomers of plasmid DNA. Vectors that contained repeated sequences of DNA and ensured efficient cloning of genetic material in B. subtilis recipient cells were constructed. The use of streptococcal plasmid pSM19035 allowed to obtain vectors which were suitable for cloning large DNA fragments (6 MD and even more) in B. subtilis. A model of B. subtilis transformation by various types of plasmid DNA is presented. The model is in agreement with the general conception of chromosomal DNA transformation.     

Ultra-Low Background DNA Cloning System

Yeast-based in vivo cloning is useful for cloning DNA fragments into plasmid vectors and is based on the ability of yeast to recombine the DNA fragments by homologous recombination. Although this method is efficient, it produces some by-products. We have developed an “ultra-low background DNA cloning system” on the basis of yeast-based in vivo cloning, by almost completely eliminating the generation of by-products and applying the method to commonly used Escherichia coli vectors, particularly those lacking yeast replication origins and carrying an ampicillin resistance gene (Amp^r). First, we constructed a conversion cassette containing the DNA sequences in the following order: an Amp^r 5′ UTR (untranslated region) and coding region, an autonomous replication sequence and a centromere sequence from yeast, a TRP1 yeast selectable marker, and an Amp^r 3′ UTR. This cassette allowed conversion of the Amp^r-containing vector into the yeast/E. coli shuttle vector through use of the Amp^r sequence by homologous recombination. Furthermore, simultaneous transformation of the desired DNA fragment into yeast allowed cloning of this DNA fragment into the same vector. We rescued the plasmid vectors from all yeast transformants, and by-products containing the E. coli replication origin disappeared. Next, the rescued vectors were transformed into E. coli and the by-products containing the yeast replication origin disappeared. Thus, our method used yeast- and E. coli-specific “origins of replication” to eliminate the generation of by-products. Finally, we successfully cloned the DNA fragment into the vector with almost 100% efficiency.     

Vectors for ligation-independent construction of lacZ gene fusions and cloning of PCR products using a nicking endonuclease

Several ligation-independent cloning methods have been developed that offer advantages for construction of recombinant plasmids at high efficiency while minimizing cloning artifacts. Here we report new plasmid vectors that use the nicking endonuclease Nt.BspQI to generate extended single stranded tails for direct cloning of PCR products. The vectors include pLacCOs1, a ColE1-derivative plasmid imparting resistance to ampicillin, which allows facile construction of lacZ translational fusions and pKanCOs1, a pSC101-derivative cloning vector that imparts resistance to kanamycin, for cloning of PCR amplicons from genomic DNA as well as from ampicillin-based plasmids. We have successfully used these plasmids to directionally clone and characterize bacterial promoters that exhibit temperature regulated expression, as well as for cloning a variety of PCR products. In all cases, constructs with the correct configurations were generated at high efficiency and with a minimal number of manipulations. The cloning vectors can also be easily modified to incorporate additional reporter genes or to express epitope-tagged gene products.     

A quantitative analysis of shotgun cloning in Bacillus subtilis protoplasts

Summary We used the Escherichia coli-Bacillus subtilis shuttle vector pHP13, which carries the replication functions of the cryptic B. subtilis plasmid pTA1060, to study the effects of BsuM restriction, plasmid size and DNA concentration on the efficiency of shotgun cloning of heterologous E. coli DNA in B. subtilis protoplasts. In a restriction-deficient strain, clones were obtained with low frequency (19% of the transformants contained a recombinant plasmid) and large inserts (>6 kb) were relatively rare (12% of the clones contained inserts in the range of 6–9 kb). The efficiency of shotgun cloning was severely reduced in restricting protoplasts: the class of large inserts (>6 kb) was under-represented in the clone bank (4% of the clones contained inserts in the range of 6–6.1 kb). Furthermore, BsuM restriction caused structural instability of some recombinant plasmids. Transformation of protoplasts with individual recombinant plasmids showed that plasmid size and transforming activity were negatively correlated. The size effect was most extreme with cut and religated plasmid DNA. The yield of clones was independent of the DNA concentration during transformation. It is therefore unlikely that clones were not detected because of simultaneous uptake of more than one plasmid. It is concluded that shotgun cloning in B. subtilis protoplasts is inferior to that in competent cells.     

Cloning Should Be Simple: Escherichia coli DH5α-Mediated Assembly of Multiple DNA Fragments with Short End Homologies

Numerous DNA assembly technologies exist for generating plasmids for biological studies. Many procedures require complex in vitro or in vivo assembly reactions followed by plasmid propagation in recombination-impaired Escherichia coli strains such as DH5α, which are optimal for stable amplification of the DNA materials. Here we show that despite its utility as a cloning strain, DH5α retains sufficient recombinase activity to assemble up to six double-stranded DNA fragments ranging in size from 150 bp to at least 7 kb into plasmids in vivo. This process also requires surprisingly small amounts of DNA, potentially obviating the need for upstream assembly processes associated with most common applications of DNA assembly. We demonstrate the application of this process in cloning of various DNA fragments including synthetic genes, preparation of knockout constructs, and incorporation of guide RNA sequences in constructs for clustered regularly interspaced short palindromic repeats (CRISPR) genome editing. This consolidated process for assembly and amplification in a widely available strain of E. coli may enable productivity gain across disciplines involving recombinant DNA work.     

Generating In Vivo Cloning Vectors for Parallel Cloning of Large Gene Clusters by Homologous Recombination

A robust method for the in vivo cloning of large gene clusters was developed based on homologous recombination (HR), requiring only the transformation of PCR products into Escherichia coli cells harboring a receiver plasmid. Positive clones were selected by an acquired antibiotic resistance, which was activated by the recruitment of a short ribosome-binding site plus start codon sequence from the PCR products to the upstream position of a silent antibiotic resistance gene in receiver plasmids. This selection was highly stringent and thus the cloning efficiency of the GFPuv gene (size: 0.7 kb) was comparable to that of the conventional restriction-ligation method, reaching up to 4.3 × 10⁴ positive clones per μg of DNA. When we attempted parallel cloning of GFPuv fusion genes (size: 2.0 kb) and carotenoid biosynthesis pathway clusters (sizes: 4 kb, 6 kb, and 10 kb), the cloning efficiency was similarly high regardless of the DNA size, demonstrating that this would be useful for the cloning of large DNA sequences carrying multiple open reading frames. However, restriction analyses of the obtained plasmids showed that the selected cells may contain significant amounts of receiver plasmids without the inserts. To minimize the amount of empty plasmid in the positive selections, the sacB gene encoding a levansucrase was introduced as a counter selection marker in receiver plasmid as it converts sucrose to a toxic levan in the E. coli cells. Consequently, this method yielded completely homogeneous plasmids containing the inserts via the direct transformation of PCR products into E. coli cells.     

Rapid preparation of vector-free hybridization probes suitable for screening recombinant libraries

A procedure is described to rapidly prepare radioactively labeled DNA inserts from crude recombinant plasmid DNA preparations. These probes can subsequently be used to identify homologous nucleotide sequences in bacteria containing recombinant plasmids by colony hybridization. In a single procedure, crude recombinant plasmid DNA is both ³²P-labeled and fragmented by nick-translation in the presence of sufficient pancreatic DNase I to produce radioactive DNA of about 0.2–0.3-kb single-strand length. At this DNA fragment length the majority of the vector and insert sequences are on different DNA fragments. The insert DNA can then be separated from vector and contaminating Escherichia colt host chromosomal DNA by the following method. The DNA fragment population is first denatured and renatured under conditions such that the recombinant plasmid DNA reassociates but host DNA does not. The renatured plasmid DNA fragments are separated from the denatured host DNA by hydroxylapatite chromatography. The plasmid DNA fragments are then denatured and renatured with an excess of insert-free vector DNA. Conditions are chosen such that the insert DNA remains single-stranded while the vector DNA becomes double-stranded. The single-stranded insert DNA can be separated from the double-stranded vector DNA on hydroxylapatite and used directly for colony hybridization.