Construction and expression of human aldolase A and B expression plasmids in Escherichia coli host

E. coli expression plasmids for human aldolases A and B (EC 4.1.2.13) have been constructed from the pIN-III expression vector and their cDNAs, and expressed in E. coli strain JM83. Enzymatically active forms of human aldolase have been generated in the cells when transfected with either pHAA47, a human aldolase A expression plasmid, or pHAB 141, a human aldolase B expression plasmid. These enzymes are indistinguishable from authentic enzymes with respect to molecular size, amino acid sequences at the NH2- and COOH-terminal regions, the Km for substrate, fructose 1,6-bisphosphate and the activity ratio of fructose 1,6-bisphosphate/fructose 1-phosphate (FDP/F1P), although net electric charge and the Km for FDP of synthetic aldolase B differed from those for a previously reported human liver aldolase B. In addition, both the expressed aldolases A and B complement the temperature-sensitive phenotype of the aldolase mutant of E. coli h8. These data argue that the expressed aldolases are structurally and functionally similar to the authentic human aldolases, and would provide a system for analysis of the structure-function relationship of human aldolases A and B.     

Effect of plasmid copy number and lac operator sequence on antibiotic-free plasmid selection by operator-repressor titration in Escherichia coli

The Escherichia coli strain DH1lacdapD enables plasmid selection and maintenance that is free from antibiotics and selectable marker genes. This is achieved by using only the lac operator sequence as a selectable element. This strain is currently used to generate high copy number plasmids with no antibiotic resistance genes for use as DNA vaccines and for expression of recombinant proteins. Until now these have been limited to pUC-based plasmids containing a high copy number pMB1-derived origin of replication, and the principle lacO(1) and auxiliary lacO(3) operators. In this study we have shown that this system can also be used to select and maintain pBR322-based plasmids with the lower copy number pMB1 origin of replication, and that lacO(1) alone or a palindromic version of lacO(1) can provide a sufficient level of repressor titration for plasmid selection. This is advantageous for recombinant protein production, where low copy number plasmids are often used and plasmid maintenance is important. The degree of repressor titration due to these plasmids was measured using the natural lactose operon in E. coli DH1 as a model.     

Studies on chemical synthesis of human cystatin A gene and its expression in Escherichia coli

A synthetic gene containing the coding sequence for the human cysteine proteinase inhibitor, cystatin A, was obtained by enzymatic assembly of 20 oligodeoxyribonucleotides which had been chemically synthesized by the solid phase phosphoramidite method. It was cloned into an Escherichia coli plasmid. The expression plasmid for cystatin A was constructed by introducing the synthetic gene downstream of the tac promoter of an E. coli plasmid which is a derivative of pKK223-3 with high copy number. The gene was expressed in E. coli JM109 without IPTG-induction. The expression of cystatin A was detected by SDS-polyacrylamide gel electrophoresis of the E. coli JM109 lysate, followed by immunoblotting using rabbit antiserum raised with human epidermal cystatin A and alkaline phosphatase-conjugated goat anti-rabbit IgG. The result showed that the molecular weight of the expression product is identical with that of the authentic protein and the antigenic properties are also the same. Furthermore, the expression product purified with a CM-papain Sepharose affinity column and FPLC system with a Mono-Q column showed the same inhibitory activity for various cysteine proteinases. Also, purified recombinant cystatin A was found to have identical amino acid composition, NH2-terminal amino acid sequence, and peptide-map on reverse phase HPLC with those of the authentic inhibitor.     

Construction of a plasmid vector for the regulatable high level expression of eukaryotic genes in Escherichia coli: an application to overproduction of chicken lysozyme

A novel expression vector pKP1500 for synthesizing unfused protein in Escherichia coli was constructed. pKP1500 perserves the tac promoter, the lacZ SD sequence, unique restriction sites (EcoRI, SmaI, BamHI, SalI, PstI and HindIII) and the rrnB terminators of pKK223-3, but the replication origin is replaced with that of pUC9. Construction of this plasmid is based upon the observation that the copy number control of pUC9 is temperature dependent. At 28 degrees C, the copy number of pKP1500 is less than 25 per chromosome, approximately the same copy number as that of pKK223-3, which contains the replication origin of pBR322, whereas at 42 degrees C, the copy number increases about 10 times and reaches up to 230 copies per chromosome. The main advantage of this system is that the temperature-dependent copy control and regulatable expression of the tac promoter make cells carrying pKP1500 derivatives stable against selective pressure by detrimental overproduction of foreign proteins at a low temperature and permits high expression of cloned DNAs at a high temperature. When chicken lysozyme cDNA carrying the initiation codon (ATG) immediately upstream from the Lys1 codon was inserted downstream from the tac promoter and the SD sequence, the pKP1500 derivative produced lysozyme at about 25% of the total cellular proteins. This value is more than 10 times higher than that obtained with the pKK223-3 derivative carrying the same lysozyme cDNA. By comparison, the expression of eukaryotic genes from the tac promoter reported by others has usually been less than a few % of the total cellular protein.(ABSTRACT TRUNCATED AT 250 WORDS)     

A mathematical model for prediction of plasmid copy number and genetic stability in Escherichia coli

The design of bioreactors for genetically modified bacterial cultures would benefit from predictive models. Of particular importance is the interaction of the external environment, cell physiology, and control of plasmid copy number. We have recently developed a model based on the molecular mechanisms for control of replication of Co1E1 type plasmids. The inclusion of the plasmid model into a single-cell E. coli model allows the explicit prediction of the interaction of cell physiology and plasmid-encoded functions. The model predictions of the copy number of plasmids with the Co1E1 origin of replication carrying a variety of regulatory mutations is very close to that observed experimentally.All of the model parameters for plasmid replication control can be obtained independently and no adjustable parameters are needed for the plasmid model. In this article we discuss the model's use in predicting the effect of operating conditions on production of a protein from a plasmid encoded gene and the stability of the recombinant cells in a continuous culture.     

Identification of multicopy suppressors of the pcnB plasmid copy number defect in Escherichia coli

Plasmids containing a ColE1 origin of replication are widely used for cloning purposes in Escherichia coli. Among the host factors that affect the copy number of ColE1 plasmids is the E. coli protein poly(A) polymerase I (PAP I), which regulates the intracellular level of RNA I, a ColE1-encoded negative regulator of plasmid replication. In strains that lack PAP I, RNA I levels are elevated, resulting in reduced levels of ColE1 plasmids in the cell. PAP I is encoded by the gene pcnB. We devised a genetic approach, based on the identification of multicopy suppressor clones, to identify trans-acting factors that can help offset the ColE1 plasmid copy number defect in a pcnB (-) genetic background. Using this strategy, we identified suppressors that mapped to two regions of the E. coli chromosome. The suppressor activity of one of the chromosomal regions was localized to the rssB gene, a response regulator gene known to be involved in the turnover of the stationary-phase sigma factor, RpoS. The second suppressor maps to min 55.4 of the E. coli chromosome, and the factor responsible for the suppressor activity appears to be a novel RNA or protein.     

Complete sequence of virulence plasmid pEIB1 from the marine fish pathogen Vibrio anguillarum strain MVM425 and location of its replication region

AIMS: The aim of this study was to determine the whole DNA sequence of pEIB1, one pJM1-like virulence plasmid from Vibrio anguillarum MVM425 and locate the replication region. METHODS AND RESULTS: DNA sequence of virulence plasmid pEIB1 from V. anguillarum MVM425 was determined using the methods of restriction endonuclease digestion, subcloning, and primer walking. The whole nucleotide sequence of pEIB1 comprises 66,164 bp, encoding 44 open reading frames (>400 bp) containing the genes of DNA replication, biosynthesis and regulation of the siderophore anguibactin and transport of ferric-anguibactin complexes. With no demonstrated replication origin, the Sau3AI partial digested plasmid DNA fragments of pEIB1 were ligated into the BamHI-fragment containing the kanamycin-resistance gene (Kmr). For there is no effective transformation in V. anguillarum, the ligated DNA was first introduced into E. coli JM83, and the transfomants were selected for resistance to kanamycin. It was demonstrated with southern blotting and DNA sequencing that plasmid pEIB7 containing the Sau3AI DNA fragment of pEIB1 (from 12516 to 13957) has the ability to replicate in E. coli JM83 and V. anguillarum MVM425sh. The segregational stability of plasmid pEIB7 kept in 100 and 4% in E. coli JM83 and V. anguillarum MVM425sh respectively when the cells were cultured in 200th generation. In following experiments, we also found that plasmid pEIB7 replicated at a middle-copy number of 10-40 in JM83, while at a high-copy number of 100-300 in MVM425sh. Moreover, pEIB7 can survive in V. alginolyticus, another fish pathogenic. CONCLUSIONS: With the whole DNA sequence of pEIB1 determining, it was found that pEIB1 showed microheterogeneity in its restriction endonuclease patterns with pJM1 though their DNA sequences had slight difference. According to the complete DNA sequence of pEIB1, its replication region was located from 12516 to 13957. And this replication region is compatible to pUC18 (pMB1), pKA3 (pSC101) and p15A: caiE (p15A). SIGNIFICANCE AND IMPACT OF THE STUDY: The worldwide vibriosis marine pathogen V. anguillarum strains contain common virulence, pJM1-like plasmids, independent on the geographical source. The pEIB1 was the second common virulence plasmid, which sequence was determined. Its sequence is highly homologous to pJM1 as they both encode biosynthesis and regulation of the siderophore anguibactin and transport of ferric-anguibactin complexes. Some interesting features as in pJM1 were also identified, such as transposon-like structures. So it can be deferred that the whole DNA sequences of virulent plasmid pEIB1 will be great helpful to future revealing these V. anguillarum virulence-related genes derived during evolution from transposition events or horizontal transfer of genes potentially originating in other organisms. Another result, replication region of pEIB1 locating is the first report about replication of pJM1-like plasmid. This work will be useful for researching pJM1-like plasmid replication mechanism in V. anguillarum.     

Cryptic plasmid pRK2 from Escherichia coli W: sequence analysis and segregational stability

Cryptic plasmid pRK2 of the strain Escherichia coli W (ATCC 9637), an ancestor of production strains for penicillin G acylase, was sequenced and characterized. Based on the data on replication region and origin (ori sequence AAC, 924-926nt), the plasmid was classified as ColE1-like plasmid. DNA sequence analysis revealed five orfs hypothetical products of which shared a significant sequence similarity with putative proteins encoded by DNA of plasmid pColE1. orf1 codes for protein Rom involved in the control of plasmid replication, orfs 2-5 code for putative mobilization proteins (Mob A-D) that show a high level of similarity with the ones encoded by DNA of plasmids pColE1 and pLG13 (E. coli), pECL18 and pEC01 (Enterobacter cloacae), pSFD10 (Salmonella choleraesuis), and pScol7 (Shigella sonnei). Recombinant plasmids pRS11 (4.91kbp), pRS12 (4.91kbp), pRS2 (2.996kbp), and pRS3 (2.623kbp) that bear the Spectinomycin resistance determinant (Spc(R)) were prepared on the basis of nucleotide sequence of pRK2. These constructs are stably maintained in the population of E. coli cells grown in the absence of the selection pressure for 63 generations. The copy number of Spc(R) constructs in E. coli host grown in antibiotic-free LB medium ranges from 25 to 40 molecules per chromosomal equivalent.     

用不同载体在大肠杆菌中表达汉滩病毒囊膜糖蛋白G1和G2

为提高汉瘫病毒囊膜糖蛋白G1和G2的表达水平,利用两种不同的表达载体pKK223－3和pGEX－4T－1构建G1和G2的表达质粒,其中PGEX－4T－1为融合蛋白表达载体。诱导所构建的G1和G2表达质粒表达G1和G2,用表达的G1和G2免疫小白鼠诱导产生的抗汉瘫病毒特异性的间接免疫荧光抗体摘度无明显差别,从而说明表达载体对汉瘫病毒G1和G2在大肠杆菌中的表达水平影响不大,表达水平都较低。同时,利用PGEX－4T－1构建G1和G2的部分多肽的表达质粒,但表达水平较完整的G1和G2无明显提高。     

Development of small high-copy-number plasmid vectors for gene expression in Caulobacter crescentus

Caulobacter crescentus is a bacterium with a distinctive life cycle and so it is studied as a cell development model. In addition, we have adapted this bacterium for recombinant protein production and display based on the crystalline surface protein (S)-layer and its C-terminal secretion signal. We report here the development of small, high-copy-number plasmid vectors and methods for producing an obligate expression host. The vectors are based on a narrow-host-range colE1-replicon-based plasmid commonly used in Escherichia coli, to which was added the replication origin of the IncQ plasmid RSF1010. C. crescentus strains were modified to enable plasmid replication by introduction of the RSF1010 repBAC genes at the recA locus. The small (4.0-4.5 kb) plasmids were in high copy numbers in both C. crescentus and E. coli and amenable to rapid methods for plasmid isolation and DNA sequencing. The method for introducing repBAC is suitable for other C. crescentus strains or any bacterium with an adequately homologous recA gene. Application of the vector for protein expression, based on the type I secretion system of the S-layer protein, when compared to constructs in broad-host-range plasmids, resulted in reduced time and steps required from clone construction to recombinant protein recovery and increased protein yield.     

Trans-complementation-dependent replication of a low molecular weight origin fragment from plasmid R6K

A non-self-replicating segment (1370 base pairs) of plasmid R6K was cloned in E. coli and shown to trans-complement temperature-sensitive replication mutants of this plasmid. This segment contains the gene which codes for a protein required for initiation of replication of the plasmid, and was used as a helper in a functional assay for an origin of replication in R6K derivatives. A 420 bp fragment, derived from R6K DNA, was shown to carry a functional origin since it was capable of replicating as a plasmid in E. coli cells carrying the helper segment either on the host chromosome or on a plasmid Col E1 derivative. The copy number of the origin fragment in cells carrying the helper segment on the chromosome is essentially the same as the copy number of R6K. A model for the positive regulation of plasmid R6K replication is presented.     

Analysis of a recessive plasmid copy number mutant: evidence for negative control of Col E1 replication.

The Col E1-derivative copy number mutant plasmid pOP1Δ6 has been used to investigate the control of plasmid replication. pOP1Δ6 normally exists at about 200 copies per chromosome, while the wild-type plasmid from which it was derived (pBGP120) exists at about 15 copies per chromosome. We have observed that in E. coli containing both pOP1Δ6 and pBGP120, the copy number of pOP1Δ6 is lowered to 4–6 copies per chromosome. Thus the mutation in pOP1Δ6 is recessive. The association between the two plasmids is stable in E. coli, indicating that incompatibility properties as well as replication control characteristics have been altered in pOP1Δ6. Co-residence of the unrelated plasmid pSC101 with pOP1Δ6 has no detectable effect on pOP1Δ6 copy number. These results suggest that a plasmid-specific, diffusible repressor may act negatively to control plasmid copy number, and that pOP1Δ6 produces a defective repressor or is altered in repressor synthesis. We have constructed in vitro a plasmid which is identical in size to pQP1Δ6 but contains a replication origin region derived from pBGP120. Since this plasmid, pNOP1, exists stably (like pBGP120) at 10–15 copies per chromosome, the high copy number of pOP1Δ6 is not related to its reduced size relative to pBGP120. To localize the mutation in pOP1Δ6 responsible for DNA overproduction, we have cloned fragments of pBGP120 into pOP1Δ6 and selected for plasmids with wild-type copy number. We find that a 2.0 kb region of pBGP120 DNA surrounding the origin of plasmid DNA replication is capable of suppressing the DNA overproducer phenotype of pOP1Δ6. The 2.0 kb fragment is capable of independent self-replication or can integrate into pOP1Δ6 in vivo to form a composite plasmid with two origins of replication. The overproducer phenotype of pOP1Δ6 is suppressed in either configuration.     

Determination of plasmid DNA concentration maintained by nonculturable Escherichia coli in marine microcosms.

The concentration of plasmid pBR322 DNA in nonculturable Escherichia coli JM83 was measured to determine whether the plasmid concentration changed during survival of E. coli in marine and estuarine water. E. coli JM83 containing the plasmid pBR322 was placed in both sterile seawater and sterile estuarine water and analyzed for survival (i.e., culturability) and plasmid maintenance. The concentration of pBR322 DNA remained stable in E. coli JM83 for 28 days in an artificial seawater microcosm, even though nonculturability was achieved within 7 days. E. coli JM83 incubated in sterile natural seawater or sterile estuarine water did not reach nonculturability within 30 days. Under all three conditions, plasmid pBR322 DNA was maintained at approximately the initial concentration. Cloning of DNA into the plasmid pUC8 did not alter the ability of E. coli to maintain vector plasmid DNA, even when the culture was in the nonculturable state, but the concentration of plasmid DNA decreased with time in the microcosm. We conclude that E. coli is able to maintain plasmid DNA while in the nonculturable state and that the concentration at which the plasmid is maintained appears to be dependent upon the copy number of the plasmid and/or the presence of foreign DNA.     

Hyperexpression of a Bacillus thuringiensis delta-endotoxin-encoding gene in Escherichia coli: properties of the product

Conditions for hyperexpression, in Escherichia coli, of the Bacillus thuringiensis var, kurstaki gene, cryIA9(c)73, encoding an insecticidal crystal protein, CryIA(c)73, were investigated by varying the promoter type, host cell, plasmid copy number, the second codon and number of terminators. The cryIA(c)73 gene was cloned into three E. coli expression vectors, pKK223-3 (Ptac promoter), pET-3a (P phi 10 promoter), and pUC19 (Ptac promoter). The level of cryIA(c)73 expression was measured by ELISA and compared to total cellular protein over growth periods of 24 and 48 h. Maximum expression levels of 284 microgram CryIA(C)73/ml (48% of cellular protein) were obtained in shake flasks with the Ptac promoter in E. coli JM103. Optimal conditions were found to be low-copy-number plasmid (pBR322 ori), 48 h of growth, in lon+ cells. A change of the gene's second codon to AAA can improve expression by two to three fold but is undetectable in the presence of a strong E. coli promoter. The cryIA(c)73 gene product, in E. coli, formed crystals with the same lattice structure as the native crystals formed in B. thuringiensis (as visualized by electron microscopy). Bioassay results (insect toxicity and specificity) of the crystal produced in E. coli were similar to that produced in B. thuringiensis.     

Determination of plasmid DNA concentration maintained by nonculturable Escherichia coli in marine microcosms.

The concentration of plasmid pBR322 DNA in nonculturable Escherichia coli JM83 was measured to determine whether the plasmid concentration changed during survival of E. coli in marine and estuarine water. E. coli JM83 containing the plasmid pBR322 was placed in both sterile seawater and sterile estuarine water and analyzed for survival (i.e., culturability) and plasmid maintenance. The concentration of pBR322 DNA remained stable in E. coli JM83 for 28 days in an artificial seawater microcosm, even though nonculturability was achieved within 7 days. E. coli JM83 incubated in sterile natural seawater or sterile estuarine water did not reach nonculturability within 30 days. Under all three conditions, plasmid pBR322 DNA was maintained at approximately the initial concentration. Cloning of DNA into the plasmid pUC8 did not alter the ability of E. coli to maintain vector plasmid DNA, even when the culture was in the nonculturable state, but the concentration of plasmid DNA decreased with time in the microcosm. We conclude that E. coli is able to maintain plasmid DNA while in the nonculturable state and that the concentration at which the plasmid is maintained appears to be dependent upon the copy number of the plasmid and/or the presence of foreign DNA.     

Folylpoly-gamma-glutamate synthetase-dihydrofolate synthetase. Cloning and high expression of the Escherichia coli folC gene and purification and properties of the gene product

The Escherichia coli gene for folylpolyglutamate synthetase-dihydrofolate synthetase was localized to plasmids pLC22-45, 24-31, and 28-44 of the Clarke-Carbon E. coli colony bank (Clarke, L., and Carbon, J. (1976) Cell 9, 91-99) by screening the bank by replica mating with an E. coli folC mutant. The folC gene was subcloned from pLC22-45 and inserted into a high copy number plasmid containing the lambda replication control region under the control of the temperature-sensitive cI857 repressor and into a high expression plasmid containing the lambda PL promoter and the cI857 repressor. The folC structural gene was located on a 1.52-kilobase PvuI fragment, sufficient to code for a protein of maximum Mr 55,000. E. coli transformants containing the recombinant plasmids, when induced by culturing at 42 degrees C, had folylpolyglutamate synthetase and dihydrofolate synthetase levels that were 100- to 400-fold higher than in wild type strains and which represented up to 4% of the soluble cell protein. The E. coli folylpolyglutamate synthetase-dihydrofolate synthetase has been purified to homogeneity from the transformants. Both activities are catalyzed by a single protein of Mr 47,000. Some kinetic properties of the enzymes and a new spectrophotometric method for assaying dihydrofolate synthetase activity are described.     

A single gene codes for the kinase and phosphatase which regulate isocitrate dehydrogenase

The gene which codes for isocitrate dehydrogenase kinase/phosphatase of Escherichia coli, aceK, has been cloned. Physical and functional mapping of this clone indicated that both the isocitrate dehydrogenase kinase and isocitrate dehydrogenase phosphatase activities are encoded by an 1800-base pair sequence. This sequence produced a polypeptide with an apparent molecular weight of 66,000, which is identical to that of the purified protein. Since a protein of this size would require an 1800-base pair coding sequence, we conclude that isocitrate dehydrogenase kinase and isocitrate dehydrogenase phosphatase are expressed from a single gene. This strongly suggests that both activities reside on the same polypeptide chain. The cloning of aceK was made possible by the fortuitous addition of a second origin of replication to the expression vectors which were employed. These expression vectors were found to inhibit the growth of E. coli on the minimal acetate selective medium. The inclusion of a second origin of replication reduced the copy number and so reduced the inhibitory effects of these vectors. Control of the copy number through the addition of replication origins may have a general facility when manipulating plasmids which are potentially toxic to E. coli.     

Expression, localization, and functional analysis of polychlorinated biphenyl degradation genes cbpABCD of Pseudomonas putida.

Genes of Pseudomonas putida strains that are capable of degrading polychlorinated biphenyls were cloned in the plasmid vector pUC19. The resultant hybrid plasmid, pAW6194, contained cbpABCD genes on a 9.0-kb DNA fragment that was necessary for the catabolism of polychlorinated biphenyls. These genes were further subcloned on an 8.0-kb HindIII fragment of pAW540. Degradation of 3-chlorobiphenyl, 2,4-dichlorobiphenyl, and 2,4,5-trichlorobiphenyl into a chloro derivative of benzoic acid was found in Escherichia coli harboring chimeric plasmid pAW540. Expression of cbpA (biphenyl dioxygenase, 6.2 U/mg of protein) and cbpC (3-phenylcatechol dioxygenase, 611.00 U/mg of protein) genes was also found in E. coli containing the hybrid plasmid pAW540. These enzyme activities were up to 10-fold higher than those found in P. putida OU83. These results led us to conclude that cbpABCD genes of P. putida OU83 were encoded on cloned DNA and expressed in E. coli. Whether the expression of cbpABCD genes of P. putida OU83 was driven by its own promoters located on the cloned DNA or by the lacZ promoter of pUC19 was examined by subcloning a 8.0-kb DNA fragment encoding the cbpABCD genes, in both orientations, in the HindIII site of the promoter probe vector pKK232-8. The resulting recombinant plasmids, pAW560 and pAW561, expressed cbpABCD genes and conferred chloramphenicol resistance only in E. coli harboring pAW560, indicating that the expression of chloramphenicol acetyltransferase is independent of cbpABCD gene expression.(ABSTRACT TRUNCATED AT 250 WORDS)