α-Crystallin: molecular chaperone and protein surfactant

Bovine lens α-crystallin has recently been shown to function as a molecular chaperone by stabilizing proteins against heat denaturation (Horwitz, J. (1992) Proc. Natl. Acad. Sci. USA, 89, 10449–10453). An investigation, using a variety of physico-chemical methods, is presented into the mechanism of stabilization. α-Crystallin exhibits properties of a surfactant. Firstly, a plot of conductivity of α-crystallin versus concentration shows a distinct inflection in its profile, i.e., a critical micelle concentration (cmc), over a concentration range from 0.15 to 0.17 mM. Gel chromatographic and ¹H-NMR spectroscopic studies spanning the cmc indicate no change in the aggregated state of α-crystallin implying that a change in conformation of the aggregate occurs at the cmc. Secondly, spectrophotometric studies of the rate of heat-induced aggregation and precipitation of alcohol dehydrogenase (ADH), β_L- and γ-crystallin in the presence of α-crystallin and a variety of synthetic surfactants show that stabilization against precipitation results from hydrophobic interactions with α-crystallin and monomeric anionic surfactants. Per mole of subunit or monomer, α-crystallin is the most efficient at stabilization. α-Crystallin, however, does not preserve the activity of ADH after heating. After heat inactivation, gel permeation HPLC indicates that ADH and α-crystallin form a high molecular weight aggregate. Similar results are obtained following incubation of β_L- and γ-crystallin with α-crystallin. ¹H-NMR spectroscopy of mixtures of α- and β_L-crystallin, in their native states, reveals that the C-terminus of βB2-crystallin is involved in interaction with α-crystallin. In the case of γ- and α-crystallin mixtures, a specific interaction occurs between α-crystallin and the C-terminal region of γ_B-crystallin, an area which is known from the crystal structure to be relatively hydrophobic and to be involved in intermolecular interactions. The short, flexible C-terminal extensions of α-crystallin are not involved in specific interactions with these proteins. It is concluded that α-crystallin interacts with native proteins in a weak manner. Once a protein has become denatured, however, the soluble complex with α-crystallin cannot be readily dissociated. In the aging lens this finding may have relevance to the formation of high molecular weight crystallin aggregates.     

Torpor-associated fluctuations in surfactant activity in Gould’s wattled bat

The primary function of pulmonary surfactant is to reduce the surface tension (ST) created at the air–liquid interface in the lung. Surfactant is a complex mixture of lipids and proteins and its function is influenced by physiological parameters such as metabolic rate, body temperature and breathing. In the microchiropteran bat Chalinolobus gouldii these parameters fluctuate throughout a 24 h period. Here we examine the surface activity of surfactant from warm–active and torpid bats at both 24°C and 37°C to establish whether alterations in surfactant composition correlate with changes in surface activity. Bats were housed in a specially constructed bat room at Adelaide University, at 24°C and on a 8:16 h light:dark cycle. Surfactant was collected from bats sampled during torpor (25<T_b<28°C), and while active (T_b>35°C). Alterations in the lipid composition of surfactant occur with changes in the activity cycle. Most notable is an increase in surfactant cholesterol (Chol) with decreases in body temperature [Codd et al., Physiol. Biochem. Zool. 73 (2000) 605–612]. Surfactant from active bats was more surface active at higher temperatures, indicated by lower ST_min and less film area compression required to reach ST_min at 37°C than at 24°C. Conversely, surfactant from torpid bats was more active at lower temperatures, indicated by lower ST_min and less area compression required to reach ST_min at 24°C than at 37°C. Alterations in the Chol content of bat surfactant appear to be crucial to allow it to achieve low STs during torpor.     

Polarization and fluorescent microscopy —Simple methods for demonstrating pulmonary surfactant lipids

Summary Birefringence and fluorochrome lipid staining with benzpyrene are demonstrated as simple morphological methods to reveal the presence or absence of surfactant lipids in human newborn lung tissue. Lack of lipid birefringence proves to be an associated finding in the lungs of premature infants with hyaline membrane disease, indicating the possible pathogenetical importance of surfactant deficiency.     

Improving sludge dewaterability by combined conditioning with Fenton’s reagent and surfactant

Applied Microbiology and Biotechnology - The effect of Fenton’s reagent combined with dodecyl dimethyl benzyl ammonium chloride (DDBAC) on sludge dewaterability was studied. The capillary...     

Effects of emulsion viscosity during surfactant‐enhanced soil flushing in porous media

Surfactants can potentially improve the efficiency of pump‐and‐treat technology for remediation of aquifers contaminated by nonaqueous phase liquids (NAPLs). However, the formation of emulsions during the removal process can Increase the viscosity in the system. This can result in pore clogging and reduction of flow, which inhibits the contaminant removal process. Formation of viscous emulsions has been identified in previous research as one of the probable causes for in situ field test failures using surfactant‐enhanced soil‐flushing technology. However, the effects of in situ emulsification and viscosity increases have not been quantified previously. The purpose of this article is to investigate effects of in situ emulsification on the remediation process. Laboratory column studies examined the mobilization of m‐xylene from porous media using a 1% alcohol ethoxylate surfactant solution (Witconol® SN90). Effects of in situ emulsification were determined. Glass columns (1.1 cm i.d. × 30 cm) were packed with 0.2‐mm glass beads to model soil media. Viscosities of emulsion solutions prepared with 1 % SN90 and various concentrations of m‐xylene were measured and compared with effluent collected during column‐flushing experiments. It was determined that as m‐xylene concentration in the emulsion solution Increases, viscosity increases. Viscosity increases caused a decrease in relative permeability within the soil column. As a result, the hydraulic gradient required to maintain a constant flowrate of 1.1 ml/min (using a syringe pump) through the soil column increased. Results show that a relatively small increase in viscosity could have a noticeable effect on the mobilization process. It is suggested that the surfactant/contaminant systems be screened to determine emulsion theology and the potential effects on the remediation process. The use of low‐concentration alcohol cosurfactants to reduce system viscosity was evaluated and was shown to be ineffective.     

Sialic acid of lung surfactant apoprotein,SP 28–36, is not required for the Ca2+-mediated interactions between surfactant lipids and SP 28–36

We examined whether removal of sialic acid from the lung surfactant apoprotein (SP 28–36) affected certain properties of reassembled surfactant lipid-SP 28–36 complexes. SP 28–36 was treated with neuraminidase and then added to liposomes made from extracted surfactant lipids. We found that in the presence of Ca²⁺ the asialoprotein was as effective as the native SP 28–36 in binding to surfactant lipids, causing aggregation and promoting rapid surface film formation.     

Recovery of poly-3-hydroxybutyrate from Alcaligenes eutrophus by surfactant–chelate aqueous system

A new method for the recovery of poly(3-hydroxybutyrate) (PHB) from Alcaligenes eutrophus was reported. This process involved the use of a surfactant–chelate aqueous solution. The key factors that influenced the purity, recovery rate and Mv of recovered PHB were investigated. The purity and recovery rate were determined by the amount of surfactant, the ratio of chelate to dry biomass, pH value, temperature and treatment time, whereas the Mv was affected by pH value and temperature. The optimal recovery conditions were a 0·12:1 surfactant-to-dry biomass ratio, a 0·08:1 chelate-to-dry biomass ratio, a pH value of 13, a 50°C temperature and a 10-min treatment time. Under such conditions, a purity of 98·7%, a recovery rate of 93·3% and a Mv of 316000 were obtained. The original Mv was 402000.     

Pulmonary surfactant protein A protects lung epithelium from cytotoxicity of human β-defensin 3

Defensins are important molecules in the innate immune system that eliminate infectious microbes. They also exhibit cytotoxicity against host cells in higher concentrations. The mechanisms by which hosts protect their own cells from cytotoxicity of defensins have been poorly understood. We found that the cytotoxicity of human β-defensin 3 (hBD3) against lung epithelial cells was dose-dependently attenuated by pulmonary surfactant protein A (SP-A), a collectin implicated in host defense and regulation of inflammatory responses in the lung. The direct interaction between SP-A and hBD3 may be an important factor in decreasing this cytotoxicity because preincubation of epithelial cells with SP-A did not affect the cytotoxicity. Consistent with in vitro analysis, intratracheal administration of hBD3 to SP-A(-/-) mice resulted in more severe tissue damage compared with that in WT mice. These data indicate that SP-A protects lung epithelium from tissue injury caused by hBD3. Furthermore, we found that the functional region of SP-A lies within Tyr(161)-Lys(201). Synthetic peptide corresponding to this region, tentatively called SP-A Y161-G200, also inhibited cytotoxicity of hBD3 in a dose-dependent manner. The SP-A Y161-G200 is a candidate as a therapeutic reagent that prevents tissue injury during inflammation.     

Role of neuregulin-1β in dexamethasone-enhanced surfactant synthesis in fetal type II cells

It is well established that glucocorticoids elevate the production of fibroblast-pneumocyte factor (FPF), which induces type II cells to synthesize surfactant phospholipids. FPF, however, has not been identified and it is not clear whether it is a single factor or a complex mixture of factors. In this study it has been shown that, when lung fibroblasts are exposed to dexamethasone, the concentration of neuregulin-1β (NRG1β) in conditioned medium is elevated 2-fold (P < 0.05), even though NRG1β gene expression is unaffected. This, together with the finding that exposure of type II cells to NRG1β directly stimulates by 3-fold the rate of phospholipid synthesis (P < 0.05), suggests that NRG1β is a component of FPF that promotes lung development.     

Methyl-β-cyclodextrin restores the structure and function of pulmonary surfactant films impaired by cholesterol

Pulmonary surfactant, a defined mixture of lipids and proteins, imparts very low surface tension to the lung-air interface by forming an incompressible film. In acute respiratory distress syndrome and other respiratory conditions, this function is impaired by a number of factors, among which is an increase of cholesterol in surfactant. The current study shows in vitro that cholesterol can be extracted from surfactant and function subsequently restored to dysfunctional surfactant films in a dose-dependent manner by methyl-β-cyclodextrin (MβCD). Bovine lipid extract surfactant was supplemented with cholesterol to serve as a model of dysfunctional surfactant. Likewise, when cholesterol in a complex with MβCD (“water-soluble cholesterol”) was added in aqueous solution, surfactant films were rendered dysfunctional. Atomic force microscopy showed recovery of function by MβCD is accompanied by the re-establishment of the native film structure of a lipid monolayer with scattered areas of lipid bilayer stacks, whereas dysfunctional films lacked bilayers. The current study expands upon a recent perspective of surfactant inactivation in disease and suggests a potential treatment.     

KL₄ peptide induces reversible collapse structures on multiple length scales in model lung surfactant

We investigated the effects of KL₄, a 21-residue amphipathic peptide approximating the overall ratio of positively charged to hydrophobic amino acids in surfactant protein B (SP-B), on the structure and collapse of dipalmitoylphosphatidylcholine and palmitoyl-oleoyl-phosphatidylglycerol monolayers. As reported in prior work on model lung surfactant phospholipid films containing SP-B and SP-B peptides, our experiments show that KL₄ improves surfactant film reversibility during repetitive interfacial cycling in association with the formation of reversible collapse structures on multiple length scales. Emphasis is on exploring a general mechanistic connection between peptide-induced nano- and microscale reversible collapse structures (silos and folds).     

Role of surfactant and pH on dissolution properties of fenofibrate and glipizide—A technical note

Depending on the dose size and solubility characteristics of low solubility drugs, a meaningful and discriminatory power of dissolution rate testing can be demonstrated. Saturation solubility of fenofibrate and glipizide in different media were determined. Solubility of fenofibrate increased directly with SLS concentration. For a 54-mg fenofibrate tablet, SLS at 0.025 M level is required for a discriminative dissolution test, while for 160-mg tablet, dissolution condition and levels of SLS should be optimized; higher concentrations may be effective (ie, 0.052 M, ∼1.5%). A pH 6.8 phosphate buffer medium is appropriate for glipizide 10-mg tablet dissolution study, when formulation ingredients include excipients with surface activity (eg, HPMC).     

Effects of the lung surfactant protein?B construct Mini-B on lipid bilayer order and topography

The hydrophobic lung surfactant protein, SP-B, is essential for survival. Cycling of lung volume during respiration requires a surface-active lipid-protein layer at the alveolar air-water interface. SP-B may contribute to surfactant layer maintenance and renewal by facilitating contact and transfer between the surface layer and bilayer reservoirs of surfactant material. However, only small effects of SP-B on phospholipid orientational order in model systems have been reported. In this study, N-terminal (SP-B(8-25)) and C-terminal (SP-B(63-78)) helices of SP-B, either linked as Mini-B or unlinked but present in equal amounts, were incorporated into either model phospholipid mixtures or into bovine lipid extract surfactant in the form of vesicle dispersions or mechanically oriented bilayer samples. Deuterium and phosphorus nuclear magnetic resonance (NMR) were used to characterize effects of these peptides on phospholipid chain orientational order, headgroup orientation, and the response of lipid-peptide mixtures to mechanical orientation by mica plates. Only small effects on chain orientational order or headgroup orientation, in either vesicle or mechanically oriented samples, were seen. In mechanically constrained samples, however, Mini-B and its component helices did have specific effects on the propensity of lipid-peptide mixtures to form unoriented bilayer populations which do not exchange with the oriented fraction on the timescale of the NMR experiment. Modification of local bilayer orientation, even in the presence of mechanical constraint, may be relevant to the transfer of material from bilayer reservoirs to a flat surface-active layer, a process that likely requires contact facilitated by the formation of highly curved protrusions.     

Assessing bioavailability of the solubilization of organic compound in nonionic surfactant micelles by dose–response analysis

It is uncertain in some extent that organic compounds solubilized in micelles of a nonionic surfactant aqueous solution are bioavailable directly by the microbes in an extractive microbial transformation or biodegradation process. In this work, a dose–response method, where a bioequivalence concept is introduced to evaluate the synergic toxicity of the nonionic surfactants and the organic compounds, was applied to analyze the inhibition effect of organic compounds (naphthalene, phenyl ether, 2-phenylethanol, and 1-butanol) in nonionic surfactant Triton X-100 micelle aqueous solutions and Triton X-114 in aqueous solutions forming cloud point systems. Based on the result, a mole solubilization ratio of organic compounds in micelle was also determined, which consisted very well with those of classic semi-equilibrium dialysis experiments. The results exhibit that bioavailability of organic compounds solubilized in micelles to microbial cells is negligible, which provides a guideline for application of nonionic surfactant micelle aqueous solutions or cloud point systems as novel media for microbial transformations or biodegradations.     

Structure of pulmonary surfactant membranes and films: The role of proteins and lipid–protein interactions

The pulmonary surfactant system constitutes an excellent example of how dynamic membrane polymorphism governs some biological functions through specific lipid–lipid, lipid–protein and protein–protein interactions assembled in highly differentiated cells. Lipid–protein surfactant complexes are assembled in alveolar pneumocytes in the form of tightly packed membranes, which are stored in specialized organelles called lamellar bodies (LB). Upon secretion of LBs, surfactant develops a membrane-based network that covers rapidly and efficiently the whole respiratory surface. This membrane-based surface layer is organized in a way that permits efficient gas exchange while optimizing the encounter of many different molecules and cells at the epithelial surface, in a cross-talk essential to keep the whole organism safe from potential pathogenic invaders.The present review summarizes what is known about the structure of the different forms of surfactant, with special emphasis on current models of the molecular organization of surfactant membrane components. The architecture and the behaviour shown by surfactant structures in vivo are interpreted, to some extent, from the interactions and the properties exhibited by different surfactant models as they have been studied in vitro, particularly addressing the possible role played by surfactant proteins. However, the limitations in structural complexity and biophysical performance of surfactant preparations reconstituted in vitro will be highlighted in particular, to allow for a proper evaluation of the significance of the experimental model systems used so far to study structure–function relationships in surfactant, and to define future challenges in the design and production of more efficient clinical surfactants.     

Effect of water activity control on the catalytic performance of surfactant–Arthromyces ramosus peroxidase complex in toluene

Arthromyces ramosus peroxidase (ARP) was successfully modified with a synthetic surfactant for one-electron oxidation reaction of a hydrophobic substrate in toluene. Although UV–visible absorption spectrum of surfactant–ARP complex in toluene showed slight red shift of Soret band compared to that in water, the complex can catalyze oxidation reaction of o-phenylenediamine (o-PDA) with hydrogen peroxide. It appeared that thermodynamic water activity in the reaction system has dominant effect on either the catalytic activity or the stability in the catalytic cycle. Steady-state kinetics under the optimal condition revealed that the specific constant (k_cat/K_m) of ARP complex for o-PDA was 2 orders of magnitude lower than that in aqueous media, while only 13-fold lower for hydrogen peroxide. The reduction of catalytic activity caused by altering the reaction media from water to toluene was found to be mainly due to the low specific constant of ARP complex for o-PDA rather than hydrogen peroxide.     

Improvement of pulmonary surfactant activity by introducing D-amino acids into highly hydrophobic amphiphilic α-peptide Hel 13-5

The high costs of artificial pulmonary surfactants, ranging in hundreds per kilogram of body weight, used for treating the respiratory distress syndrome (RDS) premature babies have limited their applications. We have extensively studied soy lecithins and higher alcohols as lipid alternatives to expensive phospholipids such as DPPC and PG. As a substitute for the proteins, we have synthesized the peptide Hel 13-5D3 by introducing D-amino acids into a highly lipid-soluble, basic amphiphilic peptide, Hel 13-5, composed of 18 amino acid residues. Analysis of the surfactant activities of lipid-amphiphilic artificial peptide mixtures using lung-irrigated rat models revealed that a mixture (Murosurf SLPD3) of dehydrogenated soy lecithin, fractionated soy lecithin, palmitic acid (PA), and peptide Hel 13-5D3 (40:40:17.5:2.5, by weight) superior pulmonary surfactant activity than a commercially available pulmonary surfactant (beractant, Surfacten®). Experiments using ovalbumin-sensitized model animals revealed that the lipid-amphiphilic artificial peptide mixtures provided significant control over an increase in the pulmonary resistance induced by premature allergy reaction and reduced the number of acidocytes and neutrophils in lung-irrigated solution. The newly developed low-cost pulmonary surfactant system may be used for treatment of a wide variety of respiratory diseases.     

Monolayer–multilayer transitions in a lung surfactant model: IR reflection–absorption spectroscopy and atomic force microscopy

A hydrophobic pulmonary surfactant protein, SP-C, has been implicated in surface-associated activities thought to facilitate the work of breathing. Model surfactant films composed of lipids and SP-C display a reversible transition from a monolayer to surface-associated multilayers upon compression and expansion at the air/water (A/W) interface. The molecular-level mechanics of this process are not yet fully understood. The current work uses atomic force microscopy on Langmuir–Blodgett films to verify the formation of multilayers in a dipalmitoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, cholesterol, and SP-C model system. Isotherms of SP-C-containing films are consistent with exclusion and essentially complete respreading during compression and expansion, respectively. Multilayer formation was not detected in the absence of SP-C. Most notable are the results from IR reflection–absorption spectroscopy (IRRAS) conducted at the A/W interface, where the position and intensity of the Amide I band of SP-C reveal that the predominantly helical structure changes its orientation in monolayers versus multilayers. IRRAS measurements indicate that the helix tilt angle changed from approximately 80° in monolayers to a transmembrane orientation in multilayers. The results constitute the first quantitative measure of helix orientation in mixed monolayer/multilamellar domains at the A/W interface and provide insight into the molecular mechanism for SP-C-facilitated respreading of surfactant.     

Production,characterization, and immobilization of partially purified surfactant–detergent and alkali-thermostable protease from newly isolated Aeromonas caviae

Proteolytic Aeromonas caviae P-1-1 growing at wide-ranging pH (7.0–11.0) and moderate salinity (0–5% NaCl) was isolated from cattle shed of Thanjavur, India. It produced lipase, gelatinase, and polyhydroxybutyrate. Different culture conditions, incubation time, carbon and nitrogen sources, vitamins, amino acids, surfactants, and metal ions for optimal growth and protease production of P-1-1 were examined. Maximum protease (0.128?U/mL) production was achieved with 1% fructose, 1% yeast extract, 0.1% ammonium sulfate, 3% NaCl, 0.1% CaCl₂?·?2H₂O, 1% glycine, 0.1% vitamin E, and 0.1% Tween-40 at pH 8.0 after 42?hr of incubation at 37°C. It was active over broad range of pH (7.0–12.0), temperature (15–100°C), and salinity (0–9% NaCl) with optima at pH 10.0, 55°C, and 3% NaCl. It retained 65 and 48% activities at pH 12.0 and 100°C, respectively. Partially purified protease was highly stable (100%) within pH range 7.0–12.0 and salinities of 0–5% NaCl for 48?hr. Cu²⁺, Mn²⁺, Co²⁺, and Ca²⁺ did not inhibit its activity. Its stability at extreme pHs, temperatures, and in the presence of surfactants and commercial detergents suggests its possible application in laundry detergents. Partially purified protease was immobilized and reused. This is the first report of alkali-thermotolerant, surfactant–detergent-stable partially purified extracellular protease from A. caviae.