Tn916 target DNA sequences bind the C-terminal domain of integrase protein with different affinities that correlate with transposon insertion frequency.

The conjugative transposon Tn916 inserts with widely different frequencies into a variety of target sites with related nucleotide sequences. The binding of chimeric proteins, consisting of maltose-binding protein fused to Tn916 integrase, to three different target sequences for Tn916 was examined by DNase I protection experiments. The C-terminal DNA binding domain of the Tn916 integrase protein was shown to protect approximately 40 bp, spanning target sites in the orfA and cat genes of the plasmid pIP501 and in the cylA gene of the plasmid pAD1. Competition binding assays showed that the affinities of the three target sites for Tn916 integrase varied over a greater than 3- but less than 10-fold range and that the cat target site bound integrase at a lower affinity than did the other two target sites. A PCR-based assay for transposition in Escherichia coli was developed to assess the frequency with which a defective minitransposon inserted into each target site. In these experiments, integrase provided in trans from a plasmid was the sole transposon-encoded protein present. This assay detected transposition into the orfA and cylA target sites but not into the cat target site. Therefore, the frequency of transposon insertion into a particular target site correlated with the affinity of the target for the integrase protein. Sequences within the target fragments similar to known Tn916 insertion sites were not protected by integrase protein. Analysis ot he electrophoretic behavior of circularly permuted sets of DNA fragments showed that all three target sites contained structural features consistent with the presence of a static bend, suggesting that these structural features in addition to the primary nucleotide sequence are necessary for integrase binding and, thus, target site activity.     

The Frequency of Conjugative Transposition of Tn916 Is Not Determined by the Frequency of Excision

Excision and formation of a covalently closed circular transposon molecule are required for conjugative transposition of Tn916 but are not the only factors that limit the frequency of conjugative transposition from one host to another. We found that in gram-positive bacteria, an increase in the frequency of excision and circularization of Tn916 caused by expression of integrase (Int) and excisionase (Xis) from a xylose-inducible promoter does not lead to an increase in the frequency of conjugative transposition. We also found that the concentration of Int and Xis in the recipient cell does not limit the frequency of conjugative transposition and that increased excision does not result in increased expression of transfer functions required to mobilize a plasmid containing the Tn916 origin of transfer. We conclude that in gram-positive hosts in which the Tn916 functions Int and Xis are overexpressed, the frequency of conjugative transposition is limited by the availability of transfer functions.     

Conjugative transposition of Tn916: the transposon int gene is required only in the donor.

Conjugative transposition of transposon Tn916 has been shown to proceed by excision of the transposon in the donor strain and insertion of this element in the recipient. This process requires the product of the transposon int gene. We report here the surprising finding that the int gene is required only in the donor during conjugative transposition. We find that Tn916 int-1, whose int gene has been inactivated by an insertion mutation, transposes when a complementing wild-type int gene is present only in the donor during mating. When the int+ gene is present in a plasmid and is expressed from the spac promoter, conjugative transposition is very inefficient. However, when the Int+ function is supplied from a coresident distantly linked Tn916 tra-641 mutant, which is defective in a function required for conjugation, efficient conjugative transposition of Tn916 int-1 occurs. This suggests either that Int is not required for integration of Tn916 in gram-positive bacteria or that the protein is transferred from the donor to the transconjugant during the mating event. When the nonconjugative plasmid pAT145 was present in the donor, it was rarely cotransferred with Tn916. This suggests that complete fusion of mating cells is not common during conjugative transposition.     

Specific DNA cleavage mediated by the integrase of conjugative transposon Tn916.

The conjugative transposon Tn916 encodes a protein called INT(Tn916) which, based on DNA sequence comparisons, is a member of the integrase family of site-specific recombinases. Integrase proteins such as INT(lambda), FLP, and XERC/D that promote site-specific recombination use characteristic, conserved amino acid residues to catalyze the cleavage and ligation of DNA substrates during recombination. The reaction proceeds by a two-step transesterification reaction requiring the formation of a covalent protein-DNA intermediate. Different requirements for homology between recombining DNA sites during integrase-mediated site-specific recombination and Tn916 transposition suggest that INT(Tn916) may use a reaction mechanism different from that used by other integrase recombinases. We show that purified INT(Tn916) mediates specific cleavage of duplex DNA substrates containing the Tn916 transposon ends and adjacent bacterial sequences. Staggered cleavages occur at both ends of the transposon, resulting in 5' hydroxyl protruding ends containing coupling sequences. These are sequences that are transferred with the transposon from donor to recipient during conjugative transposition. The nature of the cleavage products suggests that a covalent protein-DNA linkage occurs via a residue of INT(Tn916) and the 3'-phosphate group of the DNA. INT(Tn916) alone is capable of executing the strand cleavage step required for recombination during Tn916 transposition, and this reaction probably occurs by a mechanism similar to that of other integrase family site-specific recombinases.     

The integrase of the conjugative transposon Tn916 directs strand- and sequence-specific cleavage of the origin of conjugal transfer, oriT, by the endonuclease Orf20

Orf20 of the conjugative transposon Tn916 was purified as a chimeric protein fused to maltose binding protein (MBP-Orf20). The chimeric protein possessed endonucleolytic activity, cleaving both strands of the Tn916 origin of conjugal transfer (oriT) at several distinct sites and favoring GT dinucleotides. Incubation of the oriT DNA with purified Tn916 integrase (Int) and MBP-Orf20 resulted in strand- and sequence-specific cleavage of oriT at a TGGT motif in the transferred strand. This motif lies immediately adjacent to a sequence in oriT previously shown to be protected from DNase I cleavage by Int. The endonucleolytic cleavages produced by Orf20 generated a 3' OH group that could be radiolabeled by dideoxy ATP and terminal transferase. The production of a 3' OH group distinguished these Orf20-dependent cleavage events from those catalyzed by Int at the ends of Tn916. Thus, Orf20 functions as the relaxase of Tn916, nicking oriT as the first step in conjugal DNA transfer. Remarkably for a tyrosine recombinase, Tn916 Int acts as a specificity factor in the reaction, conferring both strand and sequence specificities on the endonucleolytic cleavage activity of Orf20.     

Conjugative transposition: Tn916 integrase contains two independent DNA binding domains that recognize different DNA sequences.

Transposition of the conjugative transposon Tn916 requires the activity of a protein, called Int, which is related to members of the integrase family of site-specific recombinases. This family includes phage lambda integrase as well as the Cre, FLP and XerC/XerD recombinases. Different proteins, consisting of fragments of Tn916 Int protein fused to the C-terminal end of maltose binding protein (MBP) were purified from Escherichia coli. DNase I protection experiments showed that MBP-INT proteins containing the C-terminal end of Int bound to the ends of the transposon and adjacent plasmid DNA. MBP-INT proteins containing the N-terminal end of Int bound to sequences within the transposon close to each end. Competition binding experiments showed that the sites recognized by the C- and N-terminal regions of Int did not compete with each other for binding to MBP-INT. We suggest that Tn916 and related conjugative transposons are unique among members of the integrase family of site-specific recombination systems because the presence of two DNA binding domains in the Int protein might allow Int to bridge recombining sites, and this bridging seems to be the sole mechanism ensuring that only correctly aligned molecules undergo recombination.     

Xis protein binding to the left arm stimulates excision of conjugative transposon Tn916

Tn916 and related conjugative transposons are clinically significant vectors for the transfer of antibiotic resistance among human pathogens, and they excise from their donor organisms using the transposon-encoded integrase ((Tn916)Int) and excisionase ((Tn916)Xis) proteins. In this study, we have investigated the role of the (Tn916)Xis protein in stimulating excisive recombination. The functional relevance of (Tn916)Xis binding sites on the arms of the transposon has been assessed in vivo using a transposon excision assay. Our results indicate that in Escherichia coli the stimulatory effect of the (Tn916)Xis protein is mediated by sequence-specific binding to either of its two binding sites on the left arm of the transposon. These sites lie in between the core and arm sites recognized by (Tn916)Int, suggesting that the (Tn916)Xis protein enhances excision in a manner similar to the excisionase protein of bacteriophage lambda, serving an architectural role in the stabilization of protein-nucleic acid structures required for strand synapsis. However, our finding that excision in E. coli is significantly enhanced by the host factor HU, but does not depend on the integration host factor or the factor for inversion stimulation, defines clear mechanistic differences between Tn916 and bacteriophage lambda recombination.     

Specific binding of integrase to the origin of transfer (oriT) of the conjugative transposon Tn916

Purified integrase protein (Int) of the conjugative transposon Tn916 was shown, using nuclease protection experiments, to bind specifically to a site within the origin of conjugal transfer of the transposon, oriT. A sequence similar to the ends of the transposon that are bound by the C-terminal DNA-binding domain of Int was present in the protected region. However, Int binding to oriT required both the N- and C-terminal DNA-binding domains of Int, and the pattern of nuclease protection differed from that observed when Int binds to the transposon ends and flanking DNA. Binding of Int to oriT may be part of a mechanism to prevent premature conjugal transfer of Tn916 prior to excision from the donor DNA.     

Conjugative transposition of Tn916 requires the excisive and integrative activities of the transposon-encoded integrase.

Transposon Tn916 is a 16.4-kb broad-host-range conjugative transposon originally detected in the chromosome of Enterococcus faecalis DS16. Transposition of Tn916 and related transposons involves excision of a free, nonreplicative, covalently closed circular intermediate that is substrate for integration. Excisive recombination requires two transposon-encoded proteins, Xis-Tn and Int-Tn, whereas the latter protein alone is sufficient for integration. Here we report that conjugative transposition of Tn916 requires the presence of a functional integrase in both donor and recipient strains. We have constructed a mutant, designated Tn916-int1, by replacing the gene directing synthesis of Int-Tn by an allele inactivated in vitro. In mating experiments, transfer of Tn916-int1 from Bacillus subtilis to E. faecalis was detected only when the transposon-encoded integrase was supplied by trans-complementation in both the donor and the recipient. These results suggest that conjugative transposition of Tn916 requires circularization of the element in the donor followed by transfer and integration of the nonreplicative intermediate in the recipient.     

Introduction of the Streptococcus faecalis transposon Tn916 into Bacillus thuringiensis subsp. israelensis

The conjugative Streptococcus faecalis transposon Tn916 was introduced into Bacillus thuringiensis subsp. israelensis by filter matings with S. faecalis. B. thuringiensis transconjugants resistant to tetracycline (Tetr) were detected at a frequency of approximately 7.0 X 10(-7) per recipient cell during filter matings, whereas transfer of Tn916 was not observed in broth matings. The Tetr phenotype in subsp. israelensis was stable in the absence of antibiotic selection. Southern hybridization analysis revealed that Tn916 had inserted into several different sites on the B. thuringiensis subsp. israelensis chromosome but insertion into plasmid DNA was not observed. Movement of Tn916 was demonstrated when Tetr B. thuringiensis transconjugants were mated with isogenic recipients. Southern hybridizations, however, showed that the resulting Tetr isolates contained Tn916 junction fragments that were nearly identical to the donor, suggesting that this movement resulted from transfer of chromosomal DNA from donor to recipient or from a fusion of mating cells, rather than conjugative transposition of the Tn element.     

The structure of the excisionase (Xis) protein from conjugative transposon Tn916 provides insights into the regulation of heterobivalent tyrosine recombinases

Heterobivalent tyrosine recombinases play a prominent role in numerous bacteriophage and transposon recombination systems. Their enzymatic activities are frequently regulated at a structural level by excisionase factors, which alter the ability of the recombinase to assemble into higher-order recombinogenic nucleoprotein structures. The Tn916 conjugative transposon spreads antibiotic resistance in pathogenic bacteria and is mobilized by a heterobivalent recombinase (Tn916Int), whose activity is regulated by an excisionase factor (Tn916Xis). Unlike the well-characterized (lambda)Xis excisionase from bacteriophage lambda, Tn916Xis stimulates excision in vitro and in Escherichia coli only modestly. To gain insights into this functional difference, we have performed in vitro DNA-binding studies of Tn916Xis and Tn916Int, and we have solved the solution structure of Tn916Xis. We show that the heterobivalent Tn916Int protein is capable of bridging the DR2-type and core-type sites on the left arm of the tranpsoson. Consistent with the notion that Tn916Int is regulated only loosely, we find that Tn916Xis binding does not alter the stability of DR2-Tn916Int-core bridges or the ability of Tn916Int to recognize the arms of the transposon in vitro. Despite a high degree of divergence at the primary sequence level, we show that Tn916Xis and (lambda)Xis adopt related prokaryotic winged-helix structures. However, they differ at their C termini, with Tn916Xis replacing the flexible integrase contacting tail found in (lambda)Xis with a positively charged alpha-helix. This difference provides a structural explanation for why Tn916Xis does not interact cooperatively with its cognate integrase in vitro, and reveals how subtle changes in the winged-helix fold can modulate the functional properties of excisionase factors.     

Excision and insertion of the conjugative transposon Tn916 involves a novel recombination mechanism

The covalently closed circular form of the conjugative transposon Tn916, which acts as an intermediate in transposition, is produced by a novel type of recombination. Excision of the element pairs noncomplementary base pairs, which flank the transposon in a heteroduplex, at the joint of a circular form. By a reversal of the excision process, the base pairs from the heteroduplex are inserted into the next target. We present a detailed molecular model for the movement of conjugative transposons that involves the initial formation of staggered nicks in the "coupling regions" that flank the inserted element. The different products of excision and insertion of Tn916 can be explained by this model.     

Genetic organization of the bacterial conjugative transposon Tn916.

Tn916, which encodes resistance to tetracycline, is a 16.4-kilobase conjugative transposon originally identified on the chromosome of Streptococcus faecalis DS16. The transposon has been cloned in Escherichia coli on plasmid vectors, where it expresses tetracycline resistance; it can be reintroduced into S. faecalis via protoplast transformation. We have used a lambda::Tn5 bacteriophage delivery system to introduce Tn5 into numerous sites within Tn916. The Tn5 insertions had various effects on the behavior of Tn916. Some insertions eliminated conjugative transposition but not intracellular transposition, and others eliminated an excision step believed to be essential for both types of transposition. A few inserts had no effect on transposon behavior. Functions were mapped to specific regions on the transposon.     

Transposition of Tn916 in the four replicons of the Butyrivibrio proteoclasticus B316(T) genome

The rumen bacterium Butyrivibrio proteoclasticus B316(T) has a 4.4-Mb genome composed of four replicons (approximately 3.55 Mb, 361, 302 and 186 kb). Mutagenesis of B316(T) was performed with the broad host-range conjugative transposon Tn916 to screen for functionally important characteristics. The insertion sites of 123 mutants containing a single copy of Tn916 were identified and corresponded to 53 different insertion points, of which 18 (34.0%), representing 39 mutants (31.7%), were in ORFs and 12 were where transposition occurred in both directions (top and bottom DNA strand). Up to eight mutants from several independent conjugation experiments were found to have the same integration site. Although transposition occurred in all four replicons, the number of specific insertion sites, transposition frequency and the average intertransposon distance between insertions varied between the four replicons. In silico analysis of the 53 insertion sites was used to model a target consensus sequence for Tn916 integration into B316(T) . A search of the B316(T) genome using the modelled target consensus sequence (up to two mismatches) identified 39 theoretical Tn916 insertion sites (19 coding, 20 noncoding), of which nine corresponded to Tn916 insertions identified in B316(T) mutants during our conjugation experiments.     

The presence of conjugative transposon Tn916 in the recipient strain does not impede transfer of a second copy of the element.

Transfer of the conjugative transposon Tn916 from the chromosome of Bacillus subtilis to a transposon-free Streptococcus pyogenes strain occurs at the same frequency as transfer to a Tn916-containing recipient. This rules out a model for conjugal transfer of Tn916 in which a copy of the element in the recipient represses transposition of a copy introduced by conjugation. Homology-directed integration of the incoming transposon into the resident one is less frequent than insertion elsewhere in the chromosome. This shows that after conjugation, transposition occurs more frequently than homologous recombination. However, because transconjugants arising from homologous recombination can be selected, it is possible to use Tn916 as a shuttle for gram-positive organisms for which there is no easy means of introducing DNA.     

A host factor absent from Lactococcus lactis subspecies lactis MG1363 is required for conjugative transposition

In matings between Lactococcus lactis strains, the conjugative transposons Tn916 and Tn919 are found in the chromosome of the transconjugants in the same place as in the chromosome of the donor, indicating that no transposition has occurred. In agreement with this, the frequency of L. lactis transconjugants from intraspecies matings is the same whether the donor contains the wild-type form of the transposon or the mutant Tn916-int1, which has an insertion in the transposon's integrase gene. However, in intergeneric crosses with Bacillus subtilis or Enterococcus faecalis donors, Tn916 and Tn919 transpose to different locations on the chromosome of the L. lactis transconjugants. Moreover, Tn916 and Tn919 could not be transferred by conjugation from L. lactis and B. subtilis, E. faecalis or Streptococcus pyogenes. This suggests that excision of these elements does not occur in L. lactis. When cloned into E. coli with adjacent chromosomal DNA from L. lactis, the conjugative transposons were able to excise, transpose and promote conjugation. Therefore, the inability of these elements to excise in L. lactis is not caused by a permanent structural alteration in the transposon. We conclude that L. lactis lacks a factor required for excision of conjugative transposons.     

The role of flexibility and hydration on the sequence-specific DNA recognition by the Tn916 integrase protein: a molecular dynamics analysis

The N-terminal domain of the Tn916 integrase protein (INT-DBD) is responsible for DNA binding in the process of strand cleavage and joining reactions required for transposition of the Tn916 conjugative transposon. Site-specific association is facilitated by numerous protein-DNA contacts from the face of a three-stranded beta-sheet inserted into the major groove. The protein undergoes a subtle conformational transition and is slightly unfolded in the protein-DNA complex. The conformation of many charged residues is poorly defined by NMR data but mutational studies have indicated that removal of polar side chains decreases binding affinity, while non-polar contacts are malleable. Based on analysis of the binding enthalpy and binding heat capacity, we have reasoned that dehydration of the protein-DNA interface is incomplete. This study presents results from a molecular dynamics investigation of the INT-DBD-DNA complex aimed at a more detailed understanding of the role of conformational dynamics and hydration in site-specific binding. Comparison of simulations (total of 13 ns) of the free protein and of the bound protein conformation (in isolation or DNA-bound) reveals intrinsic flexibility in certain parts of the molecule. Conformational adaptation linked to partial unfolding appears to be induced by protein-DNA contacts. The protein-DNA hydrogen-bonding network is highly dynamic. The simulation identifies protein-DNA interactions that are poorly resolved or only surmised from the NMR ensemble. Single water molecules and water clusters dynamically optimize the complementarity of polar interactions at the 'wet' protein-DNA interface. The simulation results are useful to establish a qualitative link between experimental data on individual residue's contribution to binding affinity and thermodynamic properties of INT-DBD alone and in complex with DNA.     

DNA binding by the Xis protein of the conjugative transposon Tn916.

We purified the Xis protein of the conjugative transposon Tn916 and showed by nuclease protection experiments that Xis bound specifically to sites close to each end of Tn916. These specific binding sites are close to, and in the same relative orientation to, binding sites for the N-terminal domain of Tn916 integrase protein. These results suggest that Xis is involved in the formation of nucleoprotein structures at the ends of Tn916 that help to correctly align the ends so that excision can occur.     

Excision of the conjugative transposon Tn916 in Lactococcus lactis

In Lactococcus lactis excision of Tn916 is limited by the concentration of integrase and is increased by providing more excisionase. However, even with increased excision of Tn916 in L. lactis, no conjugative transfer is detectable. This suggests that L. lactis is deficient in a host factor(s) required for conjugative transposition.