Rapid hybrid de novo assembly of a microbial genome using only short reads: Corynebacterium pseudotuberculosis I19 as a case study

Due to the advent of the so-called Next-Generation Sequencing (NGS) technologies the amount of monetary and temporal resources for whole-genome sequencing has been reduced by several orders of magnitude. Sequence reads can be assembled either by anchoring them directly onto an available reference genome (classical reference assembly), or can be concatenated by overlap (de novo assembly). The latter strategy is preferable because it tends to maintain the architecture of the genome sequence the however, depending on the NGS platform used, the shortness of read lengths cause tremendous problems the in the subsequent genome assembly phase, impeding closing of the entire genome sequence. To address the problem, we developed a multi-pronged hybrid de novo strategy combining De Bruijn graph and Overlap-Layout-Consensus methods, which was used to assemble from short reads the entire genome of Corynebacterium pseudotuberculosis strain I19, a bacterium with immense importance in veterinary medicine that causes Caseous Lymphadenitis in ruminants, principally ovines and caprines. Briefly, contigs were assembled de novo from the short reads and were only oriented using a reference genome by anchoring. Remaining gaps were closed using iterative anchoring of short reads by craning to gap flanks. Finally, we compare the genome sequence assembled using our hybrid strategy to a classical reference assembly using the same data as input and show that with the availability of a reference genome, it pays off to use the hybrid de novo strategy, rather than a classical reference assembly, because more genome sequences are preserved using the former.     

Long-read sequence assembly: a technical evaluation in barley

Sequence assembly of large and repeat-rich plant genomes has been challenging, requiring substantial computational resources and often several complementary sequence assembly and genome mapping approaches. The recent development of fast and accurate long-read sequencing by circular consensus sequencing (CCS) on the PacBio platform may greatly increase the scope of plant pan-genome projects. Here, we compare current long-read sequencing platforms regarding their ability to rapidly generate contiguous sequence assemblies in pan-genome studies of barley (Hordeum vulgare). Most long-read assemblies are clearly superior to the current barley reference sequence based on short-reads. Assemblies derived from accurate long reads excel in most metrics, but the CCS approach was the most cost-effective strategy for assembling tens of barley genomes. A downsampling analysis indicated that 20-fold CCS coverage can yield very good sequence assemblies, while even five-fold CCS data may capture the complete sequence of most genes. We present an updated reference genome assembly for barley with near-complete representation of the repeat-rich intergenic space. Long-read assembly can underpin the construction of accurate and complete sequences of multiple genomes of a species to build pan-genome infrastructures in Triticeae crops and their wild relatives.

A greatly improved reference genome sequence of barley was assembled from accurate long reads.     

Semi-Automatic In Silico Gap Closure Enabled De Novo Assembly of Two Dehalobacter Genomes from Metagenomic Data

Typically, the assembly and closure of a complete bacterial genome requires substantial additional effort spent in a wet lab for gap resolution and genome polishing. Assembly is further confounded by subspecies polymorphism when starting from metagenome sequence data. In this paper, we describe an in silico gap-resolution strategy that can substantially improve assembly. This strategy resolves assembly gaps in scaffolds using pre-assembled contigs, followed by verification with read mapping. It is capable of resolving assembly gaps caused by repetitive elements and subspecies polymorphisms. Using this strategy, we realized the de novo assembly of the first two Dehalobacter genomes from the metagenomes of two anaerobic mixed microbial cultures capable of reductive dechlorination of chlorinated ethanes and chloroform. Only four additional PCR reactions were required even though the initial assembly with Newbler v. 2.5 produced 101 contigs within 9 scaffolds belonging to two Dehalobacter strains. By applying this strategy to the re-assembly of a recently published genome of Bacteroides, we demonstrate its potential utility for other sequencing projects, both metagenomic and genomic.     

Protein Domain Analysis of Genomic Sequence Data Reveals Regulation of LRR Related Domains in Plant Transpiration in Ficus

Predicting protein domains is essential for understanding a protein’s function at the molecular level. However, up till now, there has been no direct and straightforward method for predicting protein domains in species without a reference genome sequence. In this study, we developed a functionality with a set of programs that can predict protein domains directly from genomic sequence data without a reference genome. Using whole genome sequence data, the programming functionality mainly comprised DNA assembly in combination with next-generation sequencing (NGS) assembly methods and traditional methods, peptide prediction and protein domain prediction. The proposed new functionality avoids problems associated with de novo assembly due to micro reads and small single repeats. Furthermore, we applied our functionality for the prediction of leucine rich repeat (LRR) domains in four species of Ficus with no reference genome, based on NGS genomic data. We found that the LRRNT_2 and LRR_8 domains are related to plant transpiration efficiency, as indicated by the stomata index, in the four species of Ficus. The programming functionality established in this study provides new insights for protein domain prediction, which is particularly timely in the current age of NGS data expansion.     

De Novo Assembly of the Complete Genome of an Enhanced Electricity-Producing Variant of Geobacter sulfurreducens Using Only Short Reads

State-of-the-art DNA sequencing technologies are transforming the life sciences due to their ability to generate nucleotide sequence information with a speed and quantity that is unapproachable with traditional Sanger sequencing. Genome sequencing is a principal application of this technology, where the ultimate goal is the full and complete sequence of the organism of interest. Due to the nature of the raw data produced by these technologies, a full genomic sequence attained without the aid of Sanger sequencing has yet to be demonstrated.We have successfully developed a four-phase strategy for using only next-generation sequencing technologies (Illumina and 454) to assemble a complete microbial genome de novo. We applied this approach to completely assemble the 3.7 Mb genome of a rare Geobacter variant (KN400) that is capable of unprecedented current production at an electrode. Two key components of our strategy enabled us to achieve this result. First, we integrated the two data types early in the process to maximally leverage their complementary characteristics. And second, we used the output of different short read assembly programs in such a way so as to leverage the complementary nature of their different underlying algorithms or of their different implementations of the same underlying algorithm.The significance of our result is that it demonstrates a general approach for maximizing the efficiency and success of genome assembly projects as new sequencing technologies and new assembly algorithms are introduced. The general approach is a meta strategy, wherein sequencing data are integrated as early as possible and in particular ways and wherein multiple assembly algorithms are judiciously applied such that the deficiencies in one are complemented by another.     

General method of rapid Smith/Birnstiel mapping adds for gap closure in shotgun microbial genome sequencing projects: application to Pseudomonas putida KT2440

A physical mapping strategy has been developed to verify and accelerate the assembly and gap closure phase of a microbial genome shotgun-sequencing project. The protocol was worked out during the ongoing Pseudomonas putida KT2440 genome project. A macro-restriction map was constructed by linking probe hybridisation of SwaI- or I-CeuI-restricted chromosomes to serve as a backbone for the quick quality control of sequence and contig assemblies. The library of PCR-generated SwaI linking probes was derived from the sequence assembly after 3- and 6-fold genome coverage. In order to support gap closure in regions with ambiguous assemblies such as the repetitive sequence of the seven ribosomal operons, high-resolution Smith/Birnstiel maps were generated by Southern hybridisation of pulsed-field gel electrophoresis-separated rare-cutter complete/frequent-cutter partial digestions with rare-cutter fragment end probes. Overall 1.5 Mb of the 6.1 Mb P.putida KT2440 genome has been subjected to high-resolution physical mapping in order to align assemblies generated from shotgun sequencing.     

NSIT: Novel Sequence Identification Tool

Novel sequences are DNA sequences present in an individual''s genome but absent in the human reference assembly. They are predicted to be biologically important, both individual and population specific, and consistent with the known human migration paths. Recent works have shown that an average person harbors 2–5 Mb of such sequences and estimated that the human pan-genome contains as high as 19–40 Mb of novel sequences. To identify them in a de novo genome assembly, some existing sequence aligners have been used but no computational method has been specifically proposed for this task. In this work, we developed NSIT (Novel Sequence Identification Tool), a software that can accurately and efficiently identify novel sequences in an individual''s de novo whole genome assembly. We identified and characterized 1.1 Mb, 1.2 Mb, and 1.0 Mb of novel sequences in NA18507 (African), YH (Asian), and NA12878 (European) de novo genome assemblies, respectively. Our results show very high concordance with the previous work using the respective reference assembly. In addition, our results using the latest human reference assembly suggest that the amount of novel sequences per individual may not be as high as previously reported. We additionally developed a graphical viewer for comparisons of novel sequence contents. The viewer also helped in identifying sequence contamination; we found 130 kb of Epstein-Barr virus sequence in the previously published NA18507 novel sequences as well as 287 kb of zebrafish repeats in NA12878 de novo assembly. NSIT requires 2GB of RAM and 1.5–2 hrs on a commodity desktop. The program is applicable to input assemblies with varying contig/scaffold sizes, ranging from 100 bp to as high as 50 Mb. It works in both 32-bit and 64-bit systems and outperforms, by large margins, other fast sequence aligners previously applied to this task. To our knowledge, NSIT is the first software designed specifically for novel sequence identification in a de novo human genome assembly.     

Genome sequencing and analysis of two early-flowering cherry (Cerasus × kanzakura) varieties, ‘Kawazu-zakura’ and ‘Atami-zakura’

To gain genetic insights into the early-flowering phenotype of ornamental cherry, also known as sakura, we determined the genome sequences of two early-flowering cherry (Cerasus × kanzakura) varieties, ‘Kawazu-zakura’ and ‘Atami-zakura’. Because the two varieties are interspecific hybrids, likely derived from crosses between Cerasus campanulata (early-flowering species) and Cerasus speciosa, we employed the haplotype-resolved sequence assembly strategy. Genome sequence reads obtained from each variety by single-molecule real-time sequencing (SMRT) were split into two subsets, based on the genome sequence information of the two probable ancestors, and assembled to obtain haplotype-phased genome sequences. The resultant genome assembly of ‘Kawazu-zakura’ spanned 519.8 Mb with 1,544 contigs and an N50 value of 1,220.5 kb, while that of ‘Atami-zakura’ totalled 509.6 Mb with 2,180 contigs and an N50 value of 709.1 kb. A total of 72,702 and 69,528 potential protein-coding genes were predicted in the genome assemblies of ‘Kawazu-zakura’ and ‘Atami-zakura’, respectively. Gene clustering analysis identified 2,634 clusters uniquely presented in the C. campanulata haplotype sequences, which might contribute to its early-flowering phenotype. Genome sequences determined in this study provide fundamental information for elucidating the molecular and genetic mechanisms underlying the early-flowering phenotype of ornamental cherry tree varieties and their relatives.     

Decoding the massive genome of loblolly pine using haploid DNA and novel assembly strategies

Background

The size and complexity of conifer genomes has, until now, prevented full genome sequencing and assembly. The large research community and economic importance of loblolly pine, Pinus taeda L., made it an early candidate for reference sequence determination.

Results

We develop a novel strategy to sequence the genome of loblolly pine that combines unique aspects of pine reproductive biology and genome assembly methodology. We use a whole genome shotgun approach relying primarily on next generation sequence generated from a single haploid seed megagametophyte from a loblolly pine tree, 20-1010, that has been used in industrial forest tree breeding. The resulting sequence and assembly was used to generate a draft genome spanning 23.2 Gbp and containing 20.1 Gbp with an N50 scaffold size of 66.9 kbp, making it a significant improvement over available conifer genomes. The long scaffold lengths allow the annotation of 50,172 gene models with intron lengths averaging over 2.7 kbp and sometimes exceeding 100 kbp in length. Analysis of orthologous gene sets identifies gene families that may be unique to conifers. We further characterize and expand the existing repeat library based on the de novo analysis of the repetitive content, estimated to encompass 82% of the genome.

Conclusions

In addition to its value as a resource for researchers and breeders, the loblolly pine genome sequence and assembly reported here demonstrates a novel approach to sequencing the large and complex genomes of this important group of plants that can now be widely applied.     

Pyrosequencing of the northern red oak (Quercus rubra L.) chloroplast genome reveals high quality polymorphisms for population management

Given the low intraspecific chloroplast diversity detected in northern red oak (Quercus rubra L.), more powerful genetic tools are necessary to accurately characterize Q. rubra chloroplast diversity and structure. We report the sequencing, assembly, and annotation of the chloroplast genome of northern red oak via pyrosequencing and a combination of de novo and reference-guided assembly (RGA). Chloroplast DNA from 16 individuals was separated into four MID-tagged pools for a Genome Sequencer 20 quarter-run (Roche Life Sciences, Indianapolis, IN, USA). A four-step assembly method was used to generate the Q. rubra chloroplast consensus sequence: (1) reads were assembled de novo into contigs, (2) de novo contigs were aligned to a reference genome and merged to produce a consensus sequence, (3) the consensus sequence was aligned to the reference sequence and gaps between contigs were filled with reference sequence to generate a "pseudoreference", and (4) reads were mapped to the pseudoreference using RGA to generate the draft chloroplast genome. One hundred percent of the pseudoreference sequence was covered with a minimum coverage of 2× and an average coverage of 43.75×. The 161,304-bp Q. rubra chloroplast genome draft sequence contained 137 genes and one rps19 pseudogene. The sequence was compared to that of Quercus robur and Q. nigra with 951 and 186 insertion/deletion or SNP polymorphisms detected, respectively. A total of 51 intraspecific polymorphisms were detected among four northern red oak individuals. The fully sequenced and annotated Q. rubra chloroplast genome containing locations of interspecific and intraspecific polymorphisms will be essential for studying population differentiation, phylogeography, and evolutionary history of this species as well as meeting management goals such as monitoring reintroduced populations, tracking wood products, and certifying seed lots and forests.     

BAC-Pool Sequencing and Analysis of Large Segments of A12 and D12 Homoeologous Chromosomes in Upland Cotton

Although new and emerging next-generation sequencing (NGS) technologies have reduced sequencing costs significantly, much work remains to implement them for de novo sequencing of complex and highly repetitive genomes such as the tetraploid genome of Upland cotton (Gossypium hirsutum L.). Herein we report the results from implementing a novel, hybrid Sanger/454-based BAC-pool sequencing strategy using minimum tiling path (MTP) BACs from Ctg-3301 and Ctg-465, two large genomic segments in A12 and D12 homoeologous chromosomes (Ctg). To enable generation of longer contig sequences in assembly, we implemented a hybrid assembly method to process ~35x data from 454 technology and 2.8-3x data from Sanger method. Hybrid assemblies offered higher sequence coverage and better sequence assemblies. Homology studies revealed the presence of retrotransposon regions like Copia and Gypsy elements in these contigs and also helped in identifying new genomic SSRs. Unigenes were anchored to the sequences in Ctg-3301 and Ctg-465 to support the physical map. Gene density, gene structure and protein sequence information derived from protein prediction programs were used to obtain the functional annotation of these genes. Comparative analysis of both contigs with Arabidopsis genome exhibited synteny and microcollinearity with a conserved gene order in both genomes. This study provides insight about use of MTP-based BAC-pool sequencing approach for sequencing complex polyploid genomes with limited constraints in generating better sequence assemblies to build reference scaffold sequences. Combining the utilities of MTP-based BAC-pool sequencing with current longer and short read NGS technologies in multiplexed format would provide a new direction to cost-effectively and precisely sequence complex plant genomes.     

Reevaluating Assembly Evaluations with Feature Response Curves: GAGE and Assemblathons

In just the last decade, a multitude of bio-technologies and software pipelines have emerged to revolutionize genomics. To further their central goal, they aim to accelerate and improve the quality of de novo whole-genome assembly starting from short DNA sequences/reads. However, the performance of each of these tools is contingent on the length and quality of the sequencing data, the structure and complexity of the genome sequence, and the resolution and quality of long-range information. Furthermore, in the absence of any metric that captures the most fundamental “features” of a high-quality assembly, there is no obvious recipe for users to select the most desirable assembler/assembly. This situation has prompted the scientific community to rely on crowd-sourcing through international competitions, such as Assemblathons or GAGE, with the intention of identifying the best assembler(s) and their features. Somewhat circuitously, the only available approach to gauge de novo assemblies and assemblers relies solely on the availability of a high-quality fully assembled reference genome sequence. Still worse, reference-guided evaluations are often both difficult to analyze, leading to conclusions that are difficult to interpret. In this paper, we circumvent many of these issues by relying upon a tool, dubbed , which is capable of evaluating de novo assemblies from the read-layouts even when no reference exists. We extend the FRCurve approach to cases where lay-out information may have been obscured, as is true in many deBruijn-graph-based algorithms. As a by-product, FRCurve now expands its applicability to a much wider class of assemblers – thus, identifying higher-quality members of this group, their inter-relations as well as sensitivity to carefully selected features, with or without the support of a reference sequence or layout for the reads. The paper concludes by reevaluating several recently conducted assembly competitions and the datasets that have resulted from them.