Colloidal structure and stability of DNA/polycations polyplexes investigated by small angle scattering

Polyplexes of short DNA-fragments (300 b.p., 100 nm) with tailor-made amine-based polycations of different architectures (linear and hyperbranched) were investigated in buffer solution as a function of the mixing ratio with DNA. The resulting dispersed polyplexes were characterized using small-angle neutron and X-ray scattering (SANS, SAXS) as well as cryo-TEM with respect to their mesoscopic structure and their colloidal stability. The linear polyimines form rather compact structures that have a high tendency for precipitation. In contrast, the hyperbranched polycation with enzymatic-labile pentaethylenehexamine arms (PEHA) yields polyplexes colloidally stable for months. Here the polycation coating of DNA results in a homogeneous dispersion based on a fractal network with low structural organization at low polycation amount. With increasing polycation, bundles of tens of aligned DNA rods appear that are interconnected in a fractal network with a typical correlation distance on the order of 100 nm, the average length of the DNA used. With higher organization comes a decrease in stability. The 3D network built by these beams can still exhibit some stability as long as the material concentration is large enough, but the structure collapses upon dilution. SAXS shows that the complexation does not affect the local DNA structure. Interestingly, the structural findings on the DNA polyplexes apparently correlate with the transfection efficiency of corresponding siRNA complexes. In general, these finding not only show systematic trends for the colloid stability, but may allow for rational approaches to design effective transfection carriers.     

Hyperbranched poly(amino ester)s with different terminal amine groups for DNA delivery

Hyperbranched poly(amino ester)s containing tertiary amines in the core and primary, secondary, and tertiary amines in the periphery, respectively, were evaluated for DNA delivery in vitro. The same core structure facilitated the investigation on the effects of the terminal amine type on the properties of hyperbranched poly(amino ester)s for DNA delivery. The hydrolysis of the poly(amino ester)s was monitored using (1)H NMR. The results reflected that the terminal amine type had negligible effects on the hydrolysis rate but was much slower than that of linear poly(amino ester)s, probably due to the compact hyperbranched spatial structure preventing the accessibility of water. In comparison with PEI 25 K, the hyperbranched poly(amino ester)s showed much lower cytotoxicity in Cos7, HEK293, and HepG2 cells. Gel electrophoresis indicated that poly(amino ester)s could condense DNA efficiently, and the zeta potentials and sizes of the complexes formed with different weight ratios of hyperbranched poly(amino ester)s and DNA were measured. Remarkably, all the hyperbranched poly(amino ester)s showed DNA transfection efficiency comparable to PEI 25 K in Cos7, HEK293, and HepG2 cells regardless of the terminal amine type. Therefore, the terminal amine type had insignificant effects on the hydrolysis rate, cytotoxicity, DNA condensation capability, and in vitro DNA transfection efficiency of the hyperbranched poly(amino ester)s.     

Correlating transfection barriers and biophysical properties of cationic polymethacrylates

Transfection efficiencies of several polymeric gene carriers were compared and correlated quantitatively to the amounts of cellular accumulation of plasmid DNA and to the expression of mRNA by quantitative real-time polymerase chain reaction (real-time PCR). Three polycations polymers with similar chemical structure were used in this study: poly(dimethylamino)ethyl methacrylate (PDMA) homopolymer, PEO-b-PDMA copolymer, and PEO-b-poly(diethylamino)ethyl methacrylate (PEO-b-PDEA) copolymer. Despite their similar chemical structures, the transfection efficiencies were significantly different. PEO-b-PDEA copolymer was significantly less efficient as gene carrier as compared to both PDMA and PEO-b-PDMA. Correlations between cytotoxicity, cellular uptake of plasmid DNA, expression levels of transgene and protein, and the physical properties of the polymers were observed. With the PEO-b-PDEA studies, cytotoxicity was due primarily to the excess of polymers that did not participate in the DNA binding. In addition, the inability of the polymer/DNA polyplexes to interact with cell effectively was identified as a critical barrier for high efficiency of transfection. This study demonstrated that the use of quantitative real-time PCR in combination with physical characterization techniques could provide useful insights into the transfection barrier at different cellular levels.     

Effects of the incorporation of a hydrophobic middle block into a PEG-polycation diblock copolymer on the physicochemical and cell interaction properties of the polymer-DNA complexes

One-component homopolymers of cationic monomers (polycations) and diblock copolymers comprising poly(ethylene glycol) (PEG) and a polycation block have been the most widely used types of polymers for the formulation of polymer-based gene delivery systems. In this study, we incorporate a hydrophobic middle block into the conventional PEG-polycation architecture and investigate the effects of this hydrophobic modification on the physicochemical and cell-level biological properties of the polymer-DNA complexes that are relevant to gene delivery applications. The ABC-type triblock copolymer used in this study consists of (A) PEG, (B) hydrophobic poly( n-butyl acrylate) (PnBA), and (C) cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) component polymers. The properties of the triblock copolymer/DNA complexes are compared with those of two other more conventional DNA carriers derived, respectively, using a PDMAEMA homopolymer and a PEG-PDMAEMA diblock copolymer that had comparable molecular weights for individual blocks. In aqueous solution, the PEG-PnBA-PDMAEMA polymer forms positively charged spherical micelles. The electrostatic complexation of these micelles with plasmid DNA molecules results in the formation of stable small-sized DNA particles that are coated with a micelle monolayer, as confirmed by agarose gel electrophoresis, dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryo-TEM). Proton nuclear magnetic resonance ( (1)H NMR) spectroscopy measurements indicate that the whole micelle-DNA assembly (named "micelleplex" for convenience) is shielded predominantly by the PEG chains. DLS and optical microscopy imaging measurements indicate that compared with PDMAEMA-DNA polyplexes, the micelleplexes have a significantly lower tendency to aggregate under physiological salt concentrations and show reduced interactions with negatively charged components in serum such as albumin and erythrocytes. While the micelleplexes are comparable to the PEG-PDMAEMA-based DNA polyplexes in terms of their stability against aggregation under high salt concentrations and in the presence of the albumin protein, they have a slightly higher tendency to interact with erythrocytes than the diblock copolymer polyplexes. Agarose gel electrophoresis measurements indicate that relative to the PEG-PDMAEMA polyplexes, the micelleplexes provide better protection of the encapsulated DNA from enzymatic degradation and also exhibit greater stability against disintegration induced by polyanionic additives; in these respects, the PDMAEMA homopolymer-based polyplexes show the best performance. In vitro studies in HeLa cells indicate that the PDMAEMA polyplexes show the highest gene transfection efficiency among the three different gene delivery systems. Between the micelleplexes and the PEG-PDMAEMA polyplexes, a higher gene transfection efficiency is observed with the latter system. All three formulations show comparable levels of cytotoxicity in HeLa cells.     

Polyethylenimine-graft-poly(ethylene glycol) copolymers: influence of copolymer block structure on DNA complexation and biological activities as gene delivery system

For two series of polyethylenimine-graft-poly(ethylene glycol) (PEI-g-PEG) block copolymers, the influence of copolymer structure on DNA complexation was investigated and physicochemical properties of these complexes were compared with the results of blood compatibility, cytotoxicity, and transfection activity assays. In the first series, PEI (25 kDa) was grafted to different degrees of substitution with PEG (5 kDa) and in the second series the molecular weight (MW) of PEG was varied (550 Da to 20 kDa). Using atomic force microscopy, we found that the copolymer block structure strongly influenced the DNA complex size and morphology: PEG 5 kDa significantly reduced the diameter of the spherical complexes from 142 +/- 59 to 61 +/- 28 nm. With increasing degree of PEG grafting, complexation of DNA was impeded and complexes lost their spherical shape. Copolymers with PEG 20 kDa yielded small, compact complexes with DNA (51 +/- 23 nm) whereas copolymers with PEG 550 Da resulted in large and diffuse structures (130 +/- 60 nm). The zeta-potential of complexes was reduced with increasing degree of PEG grafting if MW >or= 5 kDa. PEG 550 Da did not shield positive charges of PEI sufficiently leading to hemolysis and erythrocyte aggregation. Cytotoxicity (lactate dehydrogenase assay) was independent of MW of PEG but affected by the degree of PEG substitution: all copolymers with more than six PEG blocks formed DNA complexes of low toxicity. Finally, transfection efficiency of the complexes was studied. The combination of large particles, low toxicity, and high positive surface charge as in the case of copolymers with many PEG 550 Da blocks proved to be most efficient for in vitro gene transfer. To conclude, the degree of PEGylation and the MW of PEG were found to strongly influence DNA condensation of PEI and therefore also affect the biological activity of the PEI-g-PEG/DNA complexes. These results provide a basis for the rational design of block copolymer gene delivery systems.     

Structural effects of carbohydrate-containing polycations on gene delivery. 3. Cyclodextrin type and functionalization

Linear cationic beta-cyclodextrin (beta-CD)-based polymers can form polyplexes with plasmid DNA and transfect cultured cells. The effectiveness of the gene delivery and the cellular toxicity has been related to structural features in these polycations. Previous beta-CD polycations were prepared from the cocondensation of 6(A),6(D)-dideoxy-6(A),6(D)-diamino-beta-CD monomers with other difunctionalized monomers such as dimethyl suberimidate (DMS). Here, the type of CD and its functionalization are varied by synthesizing numerous 3(A),3(B)-dideoxy-3(A),3(B)-diamino-beta- and gamma-CD monomers. Both alkyl- and alkoxydiamines are prepared in order to vary the nature of the spacing between the CD and the primary amines in the monomers. These diamino-CD-monomers are polymerized with DMS to yield amidine-based polycations. The nature of the spacer between the CD-ring and the primary amines of each monomer is found to influence both molecular weight and polydispersity of the polycations. When these polycations are used to form polyplexes with plasmid DNA, longer alkyl regions between the CD and the charge centers in the polycation backbone increase transfection efficiency and toxicity in BHK-21 cells, while increasing hydrophilicity of the spacer (alkoxy versus alkyl) provides for lower toxicity. Further, gamma-CD-based polycations are shown to be less toxic than otherwise identical beta-CD-based polycations.     

Development of a nonviral gene delivery vehicle for systemic application

Polycation vehicles used for in vitro gene delivery require alteration for successful application in vivo. Modification of polycations by direct grafting of additional components, e.g., poly(ethylene glycol) (PEG), either before or after DNA complexation, tend to interfere with polymer/DNA binding interactions; this is a particular problem for short polycations such as linear, beta-cyclodextrin-containing polycations (betaCDPs). Here, a new method of betaCDP polyplex (polycation/DNA composite structures) modification is presented that exploits the ability to form inclusion complexes between cyclodextrins and adamantane. Surface-PEGylated betaCDP polyplexes are formed by self-assembly of the polyplexes with adamantane-PEG conjugates. While unmodified polyplexes rapidly aggregate and precipitate in salt solutions, the PEGylated betaCDP polyplexes are stable at conditions of physiological salt concentration. Addition of targeting ligands to the adamantane-PEG conjugates allows for receptor-mediated delivery; galactosylated betaCDP-based particles reveal selective targeting to hepatocytes via the asialoglycoprotein receptor. Galactosylated particles transfect hepatoma cells with 10-fold higher efficiency than glucosylated particles (control), but show no preferential transfection in a cell line lacking the asialoglycoprotein receptor. Thus, surface modification of betaCDP-based polyplexes through the use of cyclodextrin/adamantane host/guest interactions endows the particles with properties appropriate for systemic application.     

Evaluation of hyperbranched poly(amino ester)s of amine constitutions similar to polyethylenimine for DNA delivery

New hyperbranched poly(amino ester)s were synthesized via A3 + 2BB'B' ' approach, represented by the Michael addition polymerization of trimethylol-propane triacrylate (TMPTA) (A3-type monomers) with a double molar 1-(2-aminoethyl)piperazine (AEPZ) (BB'B'-type monomer) performed in chloroform at ambient temperature. The results obtained by in situ monitoring the polymerization using NMR and MS indicated that hyperbranched poly(TMPTA1-AEPZ2) was formed via a A(B'B')2 intermediate, and the B' ' (the formed 2 degrees amine) was kept intact in the reaction. Therefore, poly(TMPTA1-AEPZ2) contained secondary and tertiary amines in the core and primary amines in the periphery similar to polyethylenimine (PEI). The chemistry of protonated poly(TMPTA1-AEPZ2) was further confirmed by 13C NMR, and the molecular weight, the radius of gyration (Rg), and the hydrodynamic radius (Rh) were determined using GPC, small-angle X-ray scattering (SAXS), and laser dynamic light scattering (LDLS), respectively. The ratio of Rg/Rh of ca. 1.1 verified the hyperbranched structure. Protonated hyperbranched poly(TMPTA1-AEPZ2) is degradable and less cytotoxic as compared with PEI (25 K). Gel electrophoresis reflected that stable complexes could be formed from protonated hyperbranched poly(TMPTA1-AEPZ2) and DNA, and the size and xi-potential of the complexes were characterized. Remarkably, protonated hyperbranched poly(TMPTA1-AEPZ2) showed transfection efficiency comparable to PEI (25 k) for in vitro DNA delivery.     

Hyperbranched double hydrophilic block copolymer micelles of poly(ethylene oxide) and polyglycerol for pH-responsive drug delivery

We report the synthesis of a well-defined hyperbranched double hydrophilic block copolymer of poly(ethylene oxide)-hyperbranched-polyglycerol (PEO-hb-PG) to develop an efficient drug delivery system. In specific, we demonstrate the hyperbranched PEO-hb-PG can form a self-assembled micellar structure on conjugation with the hydrophobic anticancer agent doxorubicin, which is linked to the polymer by pH-sensitive hydrazone bonds, resulting in a pH-responsive controlled release of doxorubicin. Dynamic light scattering, atomic force microscopy, and transmission electron microscopy demonstrated successful formation of the spherical core-shell type micelles with an average size of about 200 nm. Moreover, the pH-responsive release of doxorubicin and in vitro cytotoxicity studies revealed the controlled stimuli-responsive drug delivery system desirable for enhanced efficiency. Benefiting from many desirable features of hyperbranched double hydrophilic block copolymers such as enhanced biocompatibility, increased water solubility, and drug loading efficiency as well as improved clearance of the polymer after drug release, we believe that double hydrophilic block copolymer will provide a versatile platform to develop excellent drug delivery systems for effective treatment of cancer.     

Poly(DMAEMA-NVP)-b-PEG-galactose as gene delivery vector for hepatocytes

A block copolymer composed of cationic polymer and poly(ethylene glycol) (PEG) was used as a DNA carrier. Poly(2-(dimethylamino)ethyl methacrylate (DMAEMA)-co-N-vinyl-2-pyrrolidone (NVP)) having a terminal carboxylic group was synthesized by free radical polymerization using an initiator, 4,4'-azobis(4-cyanovaleric acid). The terminal carboxylic acid was activated by N-hydroxysuccinimide (NHS) with dicyclohexylcarbodiimide (DCC) and then conjugated with PEG-bis(amine). For specific gene targeting to asialoglycoprotein receptor of hepatocytes, a galactose moiety was incorporated into the PEG terminal end of poly(DMAEMA-NVP)-b-PEG by reductive coupling using lactose and sodium cyanoborohydride. RSV luciferase plasmid was used as a reporter gene, and in vitro gene transfection efficiency was measured in HepG2 human hepatocarcinoma cells. Poly(DMAEMA-NVP)-b-PEG-galactose/DNA complexes formed at 0.5-2 polymer/plasmid weight ratio had compacted structures around 200 nm particle size and exhibited slightly negative surface charge. These complexes were coated with a cationic, pH sensitive, endosomolytic peptide, KALA, to generate positively charged poly(DMAEMA-NVP)-b-PEG-galactose/DNA/KALA complex particles. In the presence of serum proteins, both the PEG block and the galactose moiety of poly(DMAEMA-NVP)-b-PEG-galactose greatly enhanced the gene transfection efficiency, which was very close to that of Lipofectamine plus. Irrespective of the presence of serum proteins, as the KALA/DNA weight ratio increased, the transfection efficiency of poly(DMAEMA-NVP)-b-PEG-galactose was enhanced due to the pH dependent endosomal disruptive property of KALA. This study demonstrates that sufficient transfection efficiency as high as that of commercial agent could be attained by judicious formulation of molecular engineered poly(DMAEMA-NVP)-b-PEG-galactose in combination with an endosomolytic peptide, KALA.     

Cationic amphiphilic star and linear block copolymers: synthesis, self-assembly, and in vitro gene transfection

A series of amphiphilic star and linear block copolymers were synthesized using ATRP. The core consisted of either polystyrene (PS) or poly(n-butyl acrylate) (PBuA), having different glass-transition (T(g)) values. These polymers were used as macroinitiators in the polymerization of the cationic 2-(dimethylamino)ethyl methacrylate (DMAEMA). The polymers were used to study the effects of polymer architecture and flexibility on the self-assembling properties, DNA complexation, and transfection. All polymers formed core-shell micelles in aqueous solutions and condensed plasmid DNA. Linear PDMAEMA-PBuA-PDMAEMA has transfection efficiency comparable to PEI25K in ARPE19 cell line. Glassy state of the micellar core and star-shaped architecture decreased the DNA transfection compared with the rubbery and linear polymer structures. The polymers showed low cellular toxicity at low nitrogen/phosphate (n/p) ratios.     

In vitro gene delivery using polyamidoamine dendrimers with a trimesyl core

Polyamidoamine (PAMAM) dendrimer represents one of the most efficient polymeric gene carriers. To investigate the effect of the core structure and generation of dendrimers on the complex formation and transfection efficiency, a series of PAMAM dendrimers with a trimesyl core (DT) at different generations (DT4 to DT8) were developed as gene carriers and compared with the PAMAM dendrimers derived from pentaerythritol (DP) and inositol (DI). The minimal generation number of DTs at which the dendrimer has enough amino group density to effectively condense DNA was higher (generation 6) than those of DPs and DIs (generation 5). DTs of generation 6 or higher condensed DNA into complexes with an average diameter ranging from 100 to 300 nm, but the 4th and 5th generations of DT (DT4 and DT5) formed only a severe aggregate with DNA. Interestingly, the DT6/pDNA complex was determined to be much smaller (100-300 nm) than those prepared with DP5 or DI5 (>600 nm) at N/P ratios higher than 15. The optimal generation numbers at which the dendrimers showed the highest transgene expression in COS-7 cells were 5 for DPs and DIs but 6 for DTs. The DT6/pDNAcomplex with smaller size mediated higher transgene expression in COS-7 cells than those prepared with DP5 or DI5. The in vitro transfection efficiency of the DT dendrimers as evaluated in HeLa cells, COS-7 cells, and primary hepatocytes decreased in the order of DT6 > DT7 > DT8 > DT5 > DT4. The transfection mediated by DT6 was significantly inhibited by bafilomycin A1. The acid-base titration curve for DT6 showed high buffer capacity in the pH range from 5.5 to 6.4 (pK(a) approximately 6). This permits dendrimers to buffer the pH change in the endosomal compartment. However, the transfection efficiency mediated by DT6 decreased significantly in the presence of serum in both HeLa cells and COS-7 cells. The cytotoxicity of DTs evaluated in HeLa cells using the 3-{4,5-dimethylthiazol-2-yl}-2,5-diphenyltetrazolium bromide assay showed a trend of increasing toxicity with the polymer generations. The LD50 values of DT4 through DT8 were 628, 236, 79, 82, and 77 microg/mL, respectively, which were higher than that of poly(ethyleneimide) (18 microg/mL) and poly(L-lysine) (28 microg/mL) in the same assay. With a lower cytotoxicity and versatility for chemical conjugation, these PAMAM dendrimers with a DT core warrant further investigation for nonviral gene delivery.     

Blood compatible N-maleyl chitosan-graft-PAMAM copolymer for enhanced gene transfection

To improve transfection efficiency, we prepared N-maleyl chitosan-graft-polyamidoamine (NMCTS-graft-PAMAM) copolymer. Self-assembled NMCTS-graft-PAMAM/pDNA complexes were prepared by complex coacervation method at different N/P (nitrogen to phosphate ratio) ratios. The copolymer effectively formed complexes with pDNA at lower N/P ratio (N/P ratio 1.0) than that of unmodified chitosan (N/P ratio 2.0) and the complexes were spherical with particle size of 100–150 nm. The copolymer showed significant protection of DNA from nuclease attack with lower toxicity against HeLa cell. The copolymer also showed no noticeable hemolytic effects up to 10 mg/mL indicating no detectable disturbance of the red blood cell membranes. The transfection efficiency of the copolymer was increased significantly compared to that of chitosan and reached up to 36 ± 2% at N/P ratio 7.0 which was higher than that of PEI (30 ± 3% at N/P ratio 10). Therefore, the copolymer may be a strong alternative candidate as effective nonviral vector.     

Preparation and in vitro evaluation of novel lipopeptide transfection agents for efficient gene delivery

Gene therapy by delivery of nonviral expression vectors is highly desirable, due to their safety, stability, and suitability for production as bulk pharmaceuticals. However, low transfection efficiency remains a limiting factor in application on nonviral gene delivery. Despite recent advances in the field, there are still major obstacles to overcome. In an attempt to construct more efficient nonviral gene delivery vectors, we have designed a series of novel lipopeptide transfection agents, consisting of an alkyl chain, one cysteine, 1 to 4 histidine and 1 to 3 lysine residues. The lipopeptides were designed to facilitate dimerization (by way of the cysteine residues), DNA binding at neutral pH (making use of charged lysine residues), and endosomal escape (by way of weakly basic histidine residues). DNA/lipopeptide complexes were evaluated for their biophysical properties and transfection efficiencies. The number and identity of amino acids incorporated in the lipopeptide construct affected their DNA/lipopeptide complex forming capacity. As the number of lysine residues in the lipopeptide increased, the DNA complexes formed became more stable, had higher zeta potential (particle surface charge), and produced smaller mean particle sizes (typically 110 nm at a charge ratio of 5.0 and 240 nm at a charge ratio of 1.0). The effect of inclusion of histidines in the lipopeptide moiety had the opposite effect on complex formation to lysine, but was necessary for high transfection efficiency. In vitro transfection studies in COS-7 cells revealed that the efficiency of gene delivery of the luciferase encoding plasmid, pCMV-Luc, mediated by all the lipopeptides, was much higher than poly(L-lysine) (PLL), which has no endosomal escape system, and in two cases was slightly higher than that of branched polyethylenimine (PEI). Lipopeptides with at least two lysine residues and at least one histidine residue produced spontaneous transfection complexes with plasmid DNA, indicating that endosomal escape was achieved by incorporation of histidine residues. These low molecular weight peptides can be readily synthesized and purified and offer new insights into the mechanism of action of transfection complexes.     

pH-responsive three-layered PEGylated polyplex micelle based on a lactosylated ABC triblock copolymer as a targetable and endosome-disruptive nonviral gene vector

Nonviral vectors for gene therapy have recently received an increased impetus because of the inherent safety problems of the viral vectors, while their transfection efficiency is generally low compared to the viral vectors. The lack of the ability to escape from the endosomal compartments is believed to be one of the critical barriers to the intracellular delivery of noviral gene vectors. This study was devoted to the design and preparation of a novel ABC triblock copolymer for constructing a pH-responsive and targetable nonviral gene vector. The copolymer, lactosylated poly(ethylene glycol)-block-poly(silamine)-block-poly[2-(N,N-dimethylamino)ethyl methacrylate] (Lac-PEG-PSAO-PAMA), consists of lactosylated poly(ethylene glycol) (A-segment), a pH-responsive polyamine segment (B-segment), and a DNA-condensing polyamine segment (C-segment). The Lac-PEG-PSAO-PAMA spontaneously associated with plasmid DNA (pDNA) to form three-layered polyplex micelles with a PAMA/pDNA polyion complex (PIC) core, an uncomplexed PSAO inner shell, and a lactosylated PEG outer shell, as confirmed by 1H NMR spectroscopy. Under physiological conditions, the Lac-PEG-PSAO-PAMA/pDNA polyplex micelles prepared at an N/P (number of amino groups in the copolymer/number of phosphate groups in pDNA) ratio above 3 were found to be able to condense pDNA, thus adopting a relatively small size (< 150 nm) and an almost neutral surface charge (zeta approximately +5 mV). The micelle underwent a pH-induced size variation (pH = 7.4, 132.6 nm --> pH = 4.0, 181.8 nm) presumably due to the conformational changes (globule-rod transition) of the uncomplexed PSAO chain in response to pH, leading to swelling of the free PSAO inner shell at lowered pH while retaining the condensed pDNA in the PAMA/pDNA PIC core. Furthermore, the micelles exhibited a specific cellular uptake into HuH-7 cells (hepatocytes) through asialoglycoprotein (ASGP) receptor-mediated endocytosis and achieved a far more efficient transfection ability of a reporter gene compared to the Lac-PEG-PSAO/pDNA and Lac-PEG-PAMA/pDNA polyplex micelles composed of the diblock copolymers and pDNA. The effect of hydroxychloroquine as an endosomolytic agent on the transfection efficiency was not observed for the Lac-PEG-PSAO-PAMA/pDNA polyplex micelles, whereas the nigericin treatment of the cell as an inhibitor for the endosomal acidification induced a substantial decrease in the transfection efficiency, suggesting that the protonation of the free PSAO inner shell in response to a pH decrease in the endosome might lead to the disruption of the endosome through buffering of the endosomal cavity. Therefore, the polyplex micelle composed of ABC (ligand-PEG/pH-responsive segment/DNA-condensing segment) triblock copolymer would be a promising approach to a targetable and endosome disruptive nonviral gene vector.     

N-alkylated chitosan as a potential nonviral vector for gene transfection

Alkylated chitosans (ACSs) were prepared by modifying chitosan (CS) with alkyl bromide. The self-aggregation of ACSs in acetic acid solution was characterized by fluorescence spectroscopy and dynamic light scattering method. The results indicate that introducing alkyl side chains leads to the self-aggregation of ACSs, and CS with a 99% deacetylation degree shows no aggregation due to the electrostatic repulsion. The electrophoresis experiment demonstrates that the complex between CS and DNA was formed at a charge ratio (+/-) of 1/1; ACS/DNA complexes were formed at a lower charge ratio (+/-) of 1/4. A small amount of alkylated chitosans play the same shielding role as chitosan in protecting DNA from DNase hydrolysis. Differential scanning calorimetry (DSC) and atomic force microscopy (AFM) were employed separately to investigate the thermodynamic behavior of dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/CS and DPPC/ACS mixtures and the variation in topological structure of DPPC membrane induced by CS and ACS. It is shown that CS and ACS can cause the fusion of DPPC multilamellar vesicles as well as membrane destabilization. In contrast, the perturbation effect induced by ACS is more evident due to the hydrophobic interaction. CS and ACS were used to transfer plasmid-encoding CAT into C(2)C(12) cell lines. Upon elongating the alkyl side chain, the transfection efficiency is increased and levels off after the number of carbons in the side chain exceeds 8. It is proposed that the higher transfection efficiency of ACS is attributed to the increasing entry into cells facilitated by hydrophobic interactions and easier unpacking of DNA from ACS carriers due to the weakening of electrostatic attractions between DNA and ACS.     

An acid-labile block copolymer of PDMAEMA and PEG as potential carrier for intelligent gene delivery systems

Intelligent gene delivery systems based on physiologically triggered reversible shielding technology have evinced enormous interest due to their potential in vivo applications. In the present work, an acid-labile block copolymer consisting of poly(ethylene glycol) and poly(2-(dimethylamino)ethyl methacrylate) segments connected through a cyclic ortho ester linkage (PEG- a-PDMAEMA) was synthesized by atom transfer radical polymerization of DMAEMA using a PEG macroinitiator with an acid-cleavable end group. PEG- a-PDMAEMA condensed with plasmid DNA formed polyplex nanoparticles with an acid-triggered reversible PEG shield. The pH-dependent shielding/deshielding effect of PEG chains on the polyplex particles were evaluated by zeta potential and size measurements. At pH 7.4, polyplexes generated from PEG- a-PDMAEMA exhibited smaller particle size, lower surface charge, reduced interaction with erythrocytes, and less cytotoxicity compared to PDMAEMA-derived polyplexes. At pH 5.0, zeta potential of polyplexes formed from PEG- a-PDMAEMA increased, leveled up after 2 h of incubation and gradual aggregation occurred in the presence of bovine serum albumin (BSA). In contrast, the stably shielded polyplexes formed by DNA and an acid-stable block copolymer, PEG- b-PDMAEMA, did not change in size and zeta potential in 6 h. In vitro transfection efficiency of the acid-labile copolymer greatly increased after 6 h incubation at pH 5.0, approaching the same level of PDMAEMA, whereas there was only slight increase in efficiency for the stable copolymer, PEG- b-PDMAEMA.     

Modification of brittle polylactide by novel hyperbranched polymer-based nanostructures

The inherent brittleness of polylactide (PLA) poses considerable scientific challenges and limits its large-scale applications. Here, we propose and demonstrate a new industrially relevant methodology to develop a polylactide (PLA)-based nanoblend having outstanding stiffness-toughness balance. In this approach, a hydroxyl functional hyperbranched polymer (HBP) was in-situ cross-linked with a polyanhydride (PA) in the PLA matrix during melt processing. There was formation of new hyperbranched polymer-based cross-linked particles in the PLA matrix. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) revealed the sea-island morphology of PLA-cross-linked HBP blend. The domain size of cross-linked HBP particles in the PLA matrix was less than 100 nm as obtained from TEM. The presence of cross-linked hyperbranched polymer in the PLA matrix exhibited approximately 570% and approximately 847% improvement in the toughness and elongation at break, respectively, as compared to unmodified PLA. The increase in the ductility of modified PLA was related to stress whitening and multiple crazing initiated in the presence of cross-linked HBP particles. Formation of a networked interface as revealed by rheological data was associated with enhanced compatibility of the PLA-cross-linked HBP blend as compared to the PLA/HBP blend. The cross-linking reaction of HBP with PA was confirmed with the help of Fourier transform infrared spectroscopy (FTIR) and low-temperature dynamical mechanical thermal analysis (DMTA).     

Sugar-based tertiary amino gemini surfactants with a vesicle-to-micelle transition in the endosomal pH range mediate efficient transfection in vitro.

Novel reduced sugar gemini amphiphiles linked through their tertiary amino head groups via alkyl spacers of 4 or 6 carbons, and with varying (unsaturated) alkyl tail lengths of 12--18, have been synthesized and tested for transfection in vitro in an adherent Chinese hamster ovary cell line (CHO-K1). Transfection efficiencies peaked at 2.7 times that of the commercial standard Lipofectamine Plus/2000 for pure solutions of the compound bearing unsaturated (oleyl) alkyl tails. For those compounds bearing saturated alkyl tails, transfection efficiency peaked at a tail length of 16, at a level similar to Lipofectamine Plus/2000. All of the amphiphiles formed bilayer vesicles at physiological pH. Some of the amino groups at the surface were protonated, and vesicles therefore bore a positive charge. Increased protonation with reduced pH resulted in greatly increased monomer solubility and a morphology change from vesicle to micelle at characteristic pH values, dependent on the tail length. For the compounds promoting high transfection efficiency, this characteristic pH was within the range found in the endosomal compartment (7.4--4.0). Formation of mixed micelles between gemini surfactant and membrane phospholipids at reduced pH may therefore provide a method of endosome rupture and subsequent escape of entrapped DNA, thus discarding the need for extra fusogenic or endosomolytic agents. The positive charge on the vesicles at physiological pH drives the colloidal association with DNA. Small angle X-ray scattering measurements indicate that lamellar aggregates are formed, which have a d spacing of 48--54 A. Preliminary differential scanning calorimetric measurements suggest that reduction of pH causes a disordering of the hydrocarbon region of the DNA-surfactant complex.     

Intracellular trafficking of polyamidoamine-poly(ethylene glycol) block copolymers in DNA delivery

The delivery of nucleic acids has the potential to revolutionize medicine by allowing previously untreatable diseases to be clinically addressed. Viral delivery systems have shown immunogenicity and toxicity dangers, but synthetic vectors have lagged in transfection efficiency. Previously, we developed a modular, linear-dendritic block copolymer architecture with high gene transfection efficiency compared to commercial standards. This rationally designed system makes use of a cationic dendritic block to condense the anionic DNA and forms complexes with favorable endosomal escape properties. The linear block provides biocompatibility and protection from serum proteins, and can be functionalized with a targeting ligand. In this work, we quantitate performance of this system with respect to intracellular barriers to gene delivery using both high-throughput and traditional approaches. An image-based, high-throughput assay for endosomal escape is described and applied to the block copolymer system. Nuclear entry is demonstrated to be the most significant barrier to more efficient delivery and will be addressed in future versions of the system.