Structure of the Janus protein human CLIC2

Chloride intracellular channel (CLIC) proteins possess the remarkable property of being able to convert from a water-soluble state to a membrane channel state. We determined the three-dimensional structure of human CLIC2 in its water-soluble form by X-ray crystallography at 1.8-Å resolution from two crystal forms. In contrast to the previously characterized CLIC1 protein, which forms a possibly functionally important disulfide-induced dimer under oxidizing conditions, we show that CLIC2 possesses an intramolecular disulfide and that the protein remains monomeric irrespective of redox conditions. Site-directed mutagenesis studies show that removal of the intramolecular disulfide or introduction of cysteine residues in CLIC2, equivalent to those that form the intramolecular disulfide in CLIC1, does not cause dimer formation under oxidizing conditions. We also show that CLIC2 forms pH-dependent chloride channels in vitro with higher channel activity at low pH levels and that the channels are subject to redox regulation. In both crystal forms, we observed an extended loop region from the C-terminal domain, called the foot loop, inserting itself into an interdomain crevice of a neighboring molecule. The equivalent region in the structurally related glutathione transferase superfamily corresponds to the active site. This so-called foot-in-mouth interaction suggests that CLIC2 might recognize other proteins such as the ryanodine receptor through a similar interaction.     

Transmembrane extension and oligomerization of the CLIC1 chloride intracellular channel protein upon membrane interaction

Chloride intracellular channel proteins (CLICs) differ from most ion channels as they can exist in both soluble and integral membrane forms. The CLICs are expressed as soluble proteins but can reversibly autoinsert into the membrane to form active ion channels. For CLIC1, the interaction with the lipid bilayer is enhanced under oxidative conditions. At present, little evidence is available characterizing the structure of the putative oligomeric CLIC integral membrane form. Previously, fluorescence resonance energy transfer (FRET) was used to monitor and model the conformational transition within CLIC1 as it interacts with the membrane bilayer. These results revealed a large-scale unfolding between the C- and N-domains of CLIC1 as it interacts with the membrane. In the present study, FRET was used to probe lipid-induced structural changes arising in the vicinity of the putative transmembrane region of CLIC1 (residues 24-46) under oxidative conditions. Intramolecular FRET distances are consistent with the model in which the N-terminal domain inserts into the bilayer as an extended α-helix. Further, intermolecular FRET was performed between fluorescently labeled CLIC1 monomers within membranes. The intermolecular FRET shows that CLIC1 forms oligomers upon oxidation in the presence of the membranes. Fitting the data to symmetric oligomer models of the CLIC1 transmembrane form indicates that the structure is large and most consistent with a model comprising approximately six to eight subunits.     

Challenging accepted ion channel biology: p64 and the CLIC family of putative intracellular anion channel proteins (Review)

Parchorin, p64 and the related chloride intracellular channel (CLIC) proteins are widely expressed in multicellular organisms and have emerged as candidates for novel, auto-inserting, self-assembling intracellular anion channels involved in a wide variety of fundamental cellular events including regulated secretion, cell division and apoptosis. Although the mammalian phosphoproteins p64 and parchorin (49 and 65K, respectively) have only been indirectly implicated in anion channel activity, two CLIC proteins (CLIC1 and CLIC4, 27 and 29K, respectively) appear to be essential molecular components of anion channels, and CLIC1 can form anion channels in planar lipid bilayers in the absence of other cellular proteins. However, these putative ion channel proteins are controversial because they exist in both soluble and membrane forms, with at least one transmembrane domain. Even more surprisingly, soluble CLICs share the same glutaredoxin fold as soluble omega class glutathione-S-transferases. Working out how these ubiquitous, soluble proteins unfold, insert into membranes and then refold to form integral membrane proteins, and how cells control this potentially dangerous process and make use of the associated ion channels, are challenging prospects. Critical to this future work is the need for better characterization of membrane topology, careful functional analysis of reconstituted and native channels, including their conductances and selectivities, and detailed structure/function studies including targeted mutagenesis to investigate the structure of the putative pore, the role of protein phosphorylation and the role of conserved cysteine residues.     

Oxidation promotes insertion of the CLIC1 chloride intracellular channel into the membrane

Members of the chloride intracellular channel (CLIC) family exist primarily as soluble proteins but can also auto-insert into cellular membranes to form ion channels. While little is known about the process of CLIC membrane insertion, a unique feature of mammalian CLIC1 is its ability to undergo a dramatic structural metamorphosis between a monomeric glutathione-S-transferase homolog and an all-helical dimer upon oxidation in solution. Whether this oxidation-induced metamorphosis facilitates CLIC1 membrane insertion is unclear. In this work, we have sought to characterise the role of oxidation in the process of CLIC1 membrane insertion. We examined how redox conditions modify the ability of CLIC1 to associate with and insert into the membrane using fluorescence quenching studies and a sucrose-loaded vesicle sedimentation assay to measure membrane binding. Our results suggest that oxidation of monomeric CLIC1, in the presence of membranes, promotes insertion into the bilayer more effectively than the oxidised CLIC1 dimer.     

Comparative study of His- and Non-His-tagged CLIC proteins,reveals changes in their enzymatic activity

The chloride intracellular ion channel protein (CLIC) family are a unique set of ion channels that can exist as soluble and integral membrane proteins. New evidence has emerged that demonstrates CLICs' possess oxidoreductase enzymatic activity and may function as either membrane-spanning ion channels or as globular enzymes. To further characterize the enzymatic profile of members of the CLIC family and to expand our understanding of their functions, we expressed and purified recombinant CLIC1, CLIC3, and a non-functional CLIC1-Cys24A mutant using a Histidine tag, bacterial protein expression system. We demonstrate that the presence of the six-polyhistidine tag at the amino terminus of the proteins led to a decrease in their oxidoreductase enzymatic activity compared to their non-His-tagged counterparts, when assessed using 2-hydroxyethyl disulfide as a substrate. These results strongly suggest the six-polyhistidine tag alters CLIC's structure at the N-terminus, which also contains the enzyme active site. It also raises the need for caution in use of His-tagged proteins when assessing oxidoreductase protein enzymatic function.     

Members of the Chloride Intracellular Ion Channel Protein Family Demonstrate Glutaredoxin-Like Enzymatic Activity

The Chloride Intracellular Ion Channel (CLIC) family consists of six evolutionarily conserved proteins in humans. Members of this family are unusual, existing as both monomeric soluble proteins and as integral membrane proteins where they function as chloride selective ion channels, however no function has previously been assigned to their soluble form. Structural studies have shown that in the soluble form, CLIC proteins adopt a glutathione S-transferase (GST) fold, however, they have an active site with a conserved glutaredoxin monothiol motif, similar to the omega class GSTs. We demonstrate that CLIC proteins have glutaredoxin-like glutathione-dependent oxidoreductase enzymatic activity. CLICs 1, 2 and 4 demonstrate typical glutaredoxin-like activity using 2-hydroxyethyl disulfide as a substrate. Mutagenesis experiments identify cysteine 24 as the catalytic cysteine residue in CLIC1, which is consistent with its structure. CLIC1 was shown to reduce sodium selenite and dehydroascorbate in a glutathione-dependent manner. Previous electrophysiological studies have shown that the drugs IAA-94 and A9C specifically block CLIC channel activity. These same compounds inhibit CLIC1 oxidoreductase activity. This work for the first time assigns a functional activity to the soluble form of the CLIC proteins. Our results demonstrate that the soluble form of the CLIC proteins has an enzymatic activity that is distinct from the channel activity of their integral membrane form. This CLIC enzymatic activity may be important for protecting the intracellular environment against oxidation. It is also likely that this enzymatic activity regulates the CLIC ion channel function.     

Recombinant CLIC1 (NCC27) assembles in lipid bilayers via a pH-dependent two-state process to form chloride ion channels with identical characteristics to those observed in Chinese hamster ovary cells expressing CLIC1

CLIC1 (NCC27) is an unusual, largely intracellular, ion channel that exists in both soluble and membrane-associated forms. The soluble recombinant protein can be expressed in Escherichia coli, a property that has made possible both detailed electrophysiological studies in lipid bilayers and an examination of the mechanism of membrane integration. Soluble E. coli-derived CLIC1 moves from solution into artificial bilayers and forms chloride-selective ion channels with essentially identical conductance, pharmacology, and opening and closing kinetics to those observed in CLIC1-transfected Chinese hamster ovary cells. The process of membrane integration of CLIC1 is pH-dependent. Following addition of protein to the trans solution, small conductance channels with slow kinetics (SCSK) appear in the bilayer. These SCSK modules then appear to undergo a transition to form a high conductance channel with fast kinetics. This has four times the conductance of the SCSK and fast kinetics that characterize the native channel. This suggests that the CLIC1 ion channel is likely to consist of a tetrameric assembly of subunits and indicates that despite its size and unusual properties, it is able to form a completely functional ion channel in the absence of any other ancillary proteins.     

From glutathione transferase to pore in a CLIC

Many plasma membrane chloride channels have been cloned and characterized in great detail. In contrast, very little is known about intracellular chloride channels. Members of a novel class of such channels, called the CLICs (chloride intracellular channels), have been identified over the last few years. A striking feature of the CLIC family of ion channels is that they can exist in a water-soluble state as well as a membrane-bound state. A major step forward in understanding the functioning of these channels has been the recent crystal structure determination of one family member, CLIC1. The structure confirms that CLICs are members of the glutathione S-transferase superfamily and provides clues as to how CLICs can insert into membranes to form chloride channels.     

Crystal structure of a soluble form of the intracellular chloride ion channel CLIC1 (NCC27) at 1.4-A resolution

CLIC1 (NCC27) is a member of the highly conserved class of chloride ion channels that exists in both soluble and integral membrane forms. Purified CLIC1 can integrate into synthetic lipid bilayers forming a chloride channel with similar properties to those observed in vivo. The structure of the soluble form of CLIC1 has been determined at 1.4-A resolution. The protein is monomeric and structurally homologous to the glutathione S-transferase superfamily, and it has a redox-active site resembling glutaredoxin. The structure of the complex of CLIC1 with glutathione shows that glutathione occupies the redox-active site, which is adjacent to an open, elongated slot lined by basic residues. Integration of CLIC1 into the membrane is likely to require a major structural rearrangement, probably of the N-domain (residues 1-90), with the putative transmembrane helix arising from residues in the vicinity of the redox-active site. The structure indicates that CLIC1 is likely to be controlled by redox-dependent processes.     

Crystal structure of the soluble form of the redox-regulated chloride ion channel protein CLIC4

The structure of CLIC4, a member of the CLIC family of putative intracellular chloride ion channel proteins, has been determined at 1.8 Angstroms resolution by X-ray crystallography. The protein is monomeric and it is structurally similar to CLIC1, belonging to the GST fold class. Differences between the structures of CLIC1 and CLIC4 are localized to helix 2 in the glutaredoxin-like N-terminal domain, which has previously been shown to undergo a dramatic structural change in CLIC1 upon oxidation. The structural differences in this region correlate with the sequence differences, where the CLIC1 sequence appears to be atypical of the family. Purified, recombinant, wild-type CLIC4 is shown to bind to artificial lipid bilayers, induce a chloride efflux current when associated with artificial liposomes and produce an ion channel in artificial bilayers with a conductance of 30 pS. Membrane binding is enhanced by oxidation of CLIC4 while no channels were observed via tip-dip electrophysiology in the presence of a reducing agent. Thus, recombinant CLIC4 appears to be able to form a redox-regulated ion channel in the absence of any partner proteins.     

Glutamate 85 and glutamate 228 contribute to the pH-response of the soluble form of chloride intracellular channel 1

The chloride intracellular channel protein, CLIC1, is synthesised as a soluble monomer that can reversibly bind membranes. Soluble CLIC1 is proposed to respond to the low pH found at a membrane surface by partially unfolding and restructuring into a membrane-competent conformation. This transition is proposed to be controlled by strategically located “pH-sensor” residues that become protonated at acidic pH. In this study, we investigate the role of two conserved glutamate residues, Glu85 in the N-domain and Glu228 in the C-domain, as pH-sensors. E85L and E228L CLIC1 variants were created to reduce pH sensitivity by permanently breaking the bonds these residues form. The structure and stability of each variant was compared to the wild type at both pH 7.0 and pH 5.5. Neither substitution significantly altered the structure but both decreased the conformational stability. Furthermore, E85L CLIC1 formed a urea-induced unfolding intermediate state at both pH 7 and pH 5.5 compared to wild-type and E228L CLIC1 which only formed the intermediate at pH 5.5. We conclude that Glu85 and Glu228 are two of the five pH-sensor residues of CLIC1 and contribute to the pH-response in different ways. Glu228 lowers the stability of the native state at pH 5.5, while Glu85 contributes both to the stability of the native state and to the formation of the intermediate state. By putting these interactions into the context of the three previously described CLIC1 pH-sensor residues, we propose a mechanism for the conversion of CLIC1 from the soluble state to the pre-membrane form.     

A conserved GXXXG motif in the transmembrane domain of CLIC proteins is essential for their cholesterol-dependant membrane interaction

BackgroundSterols have been reported to modulate conformation and hence the function of several membrane proteins. One such group is the Chloride Intracellular Ion Channel (CLIC) family of proteins. The CLIC protein family consists of six evolutionarily conserved protein members in vertebrates. These proteins exist as both monomeric soluble proteins and as membrane bound proteins. To date, the structure of their membrane-bound form remains unknown. In addition to several studies indicating cellular redox environment and pH as facilitators of CLIC1 insertion into membranes, we have also demonstrated that the spontaneous membrane insertion of CLIC1 is regulated by membrane cholesterol.MethodWe have performed Langmuir-film, Impedance Spectroscopy and Molecular Docking Simulations to study the role of this GXXXG motif in CLIC1 interaction with cholesterol.ResultsUnlike CLIC1-wild-type protein, the G18A and G22A mutants, that form part of the GXXXG motif, showed much slower initial kinetics and lower ion channel activity compared to the native protein. This difference can be attributed to the significantly reduced membrane interaction and insertion rate of the mutant proteins and/or slower formation of the final membrane configuration of the mutant proteins once in the membrane.Conclusion: In this study, our findings uncover the identification of a GXXXG motif in CLIC1, which likely serves as the cholesterol-binding domain, that facilitates the protein's membrane interaction and insertion. Furthermore, we were able to postulate a model by which CLIC1 can autonomously insert into membranes to form functional ion channels.General significanceMembers of the CLIC family of proteins demonstrate unusual structural and dual functional properties – as ion channels and enzymes. Elucidating how the CLIC proteins' interact with membranes, thus allowing them to switch between their soluble and membrane form, will provide key information as to a mechanism of moonlighting activity and a novel regulatory role for cholesterol in such a process.     

The enigma of the CLIC proteins: Ion channels, redox proteins, enzymes, scaffolding proteins?

Chloride intracellular channel proteins (CLICs) are distinct from most ion channels in that they have both soluble and integral membrane forms. CLICs are highly conserved in chordates, with six vertebrate paralogues. CLIC-like proteins are found in other metazoans. CLICs form channels in artificial bilayers in a process favoured by oxidising conditions and low pH. They are structurally plastic, with CLIC1 adopting two distinct soluble conformations. Phylogenetic and structural data indicate that CLICs are likely to have enzymatic function. The physiological role of CLICs appears to be maintenance of intracellular membranes, which is associated with tubulogenesis but may involve other substructures.     

Redox regulation of CLIC1 by cysteine residues associated with the putative channel pore

Chloride intracellular channels (CLICs) are putative pore-forming glutathione-S-transferase homologs that are thought to insert into cell membranes directly from the cytosol. We incorporated soluble, recombinant human CLIC1 into planar lipid bilayers to investigate the associated ion channels, and noted that channel assembly (unlike membrane insertion) required a specific lipid mixture. The channels formed by reduced CLIC1 were similar to those previously recorded from cells and "tip-dip" bilayers, and specific anti-CLIC1 antibodies inhibited them. However, the amplitudes of the filtered single-channel currents were strictly regulated by the redox potential on the "extracellular" (or "luminal") side of the membrane, with minimal currents under strongly oxidizing conditions. We carried out covalent functional modification and site-directed mutagenesis of this controversial ion channel to test the idea that cysteine 24 is a critical redox-sensitive residue located on the extracellular (or luminal) side of membrane CLIC1 subunits, in a cysteine-proline motif close to the putative channel pore. Our findings support a simple structural hypothesis to explain how CLIC1 oligomers form pores in membranes, and suggest that native channels may be regulated by a novel mechanism involving the formation and reduction of intersubunit disulphide bonds.     

Trimeric structure of the wild soluble chloride intracellular ion channel CLIC4 observed in crystals

The crystal structure of a wild type of the human soluble chloride intracellular ion channel CLIC4 (wCLIC4) has been determined at a resolution of 2.2A. The structure shows a homotrimer in an asymmetric unit, which is first observed in CLICs. The assembly of the trimer takes a unique triple interaction mode between three monomers with a hydrogen-bond network and hydrophobic contacts. Through such complicated interactions, the homotrimer of wCLIC4 is firmly stabilized. The structure shows an oligomeric mode with a unique assembly mechanism by which the oligomerization of CLIC4 can be performed without any intramolecular disulfide bond formation. It indicated a possibility that CLIC4 may take a unique structural organization distinct from CLIC1 for docking with lipid bilayers. In addition, the structure shows distinct conformational states of the h2 region for respective monomers of the trimer, which reveal an intrinsic conformational susceptibility for this significant region in the structural transition.     

Formation of an unfolding intermediate state of soluble chloride intracellular channel protein CLIC1 at acidic pH

CLIC proteins function as anion channels when their structures convert from a soluble form to an integral membrane form. While very little is known about the mechanism of the conversion process, channel formation and activity are highly pH-dependent. In this study, the structural properties and conformational stability of CLIC1 were determined as a function of pH in the absence of membranes to improve our understanding of how its conformation changes when the protein encounters the acidic environment at the surface of a membrane. Although the global conformation and size of CLIC1 are not significantly altered by pH in the range of 5.5-8.2, equilibrium unfolding studies reveal that the protein molecule becomes destabilized at low pH, resulting in the formation of a highly populated intermediate with a solvent-exposed hydrophobic surface. Unlike the intermediates formed by many soluble pore-forming proteins for their insertion into membranes, the CLIC1 intermediate is not a molten globule. Acid-induced destabilization and partial unfolding of CLIC1 involve helix alpha1 which is the major structural element of the transmembrane region. We propose that the acidic environment encountered by CLICs at the surface of membranes primes the transmembrane region in the N-domain, thereby lowering the energy barrier for the conversion of soluble CLICs to their membrane-inserted forms.     

Mapping functional domains of chloride intracellular channel (CLIC) proteins in vivo

Chloride intracellular channel (CLIC) proteins are small proteins distantly related to the omega family of glutathione S-transferases (GSTs). CLIC proteins are expressed in a wide variety of tissues in multicellular organisms and are targeted to specific cellular membranes. Members of this family are capable in vitro of changing conformation from a globular, soluble state to a membrane-inserted state in which they provide chloride conductance. The structural basis for in vivo CLIC protein function, however, is not well understood. We have mapped the functional domains of CLIC family members using an in vivo assay for membrane localization and function of CLIC proteins in the nematode Caenorhabditis elegans. A<70 amino acid N-terminal domain is a key determinant of membrane localization and function of invertebrate CLIC proteins. This domain, which we term the 'PTM' domain, named after an amphipathic putative transmembrane helix contained within it, directs distinct C. elegans CLIC homologs to distinct subcellular membranes. We find that within the PTM region, the cysteine residues required for GST-type activity are unnecessary for invertebrate CLIC function, but that specific residues within the proposed transmembrane helix are necessary for correct targeting and protein function. We find that among all tested invertebrate CLIC proteins, function appears to be completely conserved despite striking differences in the charged residues contained within the amphipathic helix. This indicates that these residues do not contribute to anion selectivity as previously suggested. We find that outside the PTM region, the remaining three-quarters of CLIC protein sequence is functionally equivalent not only among vertebrate and invertebrate CLIC proteins, but also among the more distantly related GST-omega and GST-sigma proteins. The PTM region thus provides both targeting information and CLIC functional specificity, possibly adapting GST-type proteins to function as ion channels.     

The glutathione transferase structural family includes a nuclear chloride channel and a ryanodine receptor calcium release channel modulator

The ubiquitous glutathione transferases (GSTs) catalyze glutathione conjugation to many compounds and have other diverse functions that continue to be discovered. We noticed sequence similarities between Omega class GSTs and a nuclear chloride channel, NCC27 (CLIC1), and show here that NCC27 belongs to the GST structural family. The structural homology prompted us to investigate whether the human Omega class glutathione transferase GSTO1-1 forms or modulates ion channels. We find that GSTO1-1 modulates ryanodine receptors (RyR), which are calcium channels in the endoplasmic reticulum of various cells. Cardiac RyR2 activity was inhibited by GSTO1-1, whereas skeletal muscle RyR1 activity was potentiated. An enzymatically active conformation of GSTO1-1 was required for inhibition of RyR2, and mutation of the active site cysteine (Cys-32 --> Ala) abolished the inhibitory activity. We propose a novel role for GSTO1-1 in protecting cells containing RyR2 from apoptosis induced by Ca(2+) mobilization from intracellular stores.     

A conserved cationic motif enhances membrane binding and insertion of the chloride intracellular channel protein 1 transmembrane domain

The chloride intracellular channel protein 1 (CLIC1) is unique among eukaryotic ion channels in that it can exist as either a soluble monomer or an integral membrane channel. CLIC1 contains no known membrane-targeting signal sequences and the environmental factors which promote membrane binding of the transmembrane domain (TMD) are poorly understood. Here we report a positively charged motif at the C-terminus of the TMD and show that it enhances membrane partitioning and insertion. A 30-mer TMD peptide was synthesized in which the positively charged motif was replaced by three glutamate residues. The peptide was examined in 2,2,2-trifluoroethanol (TFE), sodium dodecyl sulfate micelles and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine liposomes using size-exclusion chromatography, far-UV CD, and fluorescence spectroscopy. The motif appears to enhance membrane interaction via electrostatic contacts and functions as an electrostatic plug to anchor the TMD in membranes. In addition, the motif is also involved in orientating the TMD with respect to the cis and trans faces of the membrane. These findings shed light on the intrinsic and environmental factors that promote the spontaneous conversion of CLIC1 from a water-soluble to a membrane-bound protein.     

Intracellular Ion Channel CLIC1: Involvement in Microglia-Mediated β-Amyloid Peptide(1-42) Neurotoxicity

Microglia can exacerbate central nervous system disorders, including stroke and chronic progressive neurodegenerative diseases such as Alzheimer disease. Mounting evidence points to ion channels expressed by microglia as contributing to these neuropathologies. The Chloride Intracellular Channel (CLIC) family represents a class of chloride intracellular channel proteins, most of which are localized to intracellular membranes. CLICs are unusual in that they possess both soluble and integral membrane forms. Amyloid β-peptide (Aβ) accumulation in plaques is a hallmark of familial Alzheimer disease. The truncated Aβ_25-35 species was shown previously to increase the expression of CLIC1 chloride conductance in cortical microglia and to provoke microglial neurotoxicity. However, the highly pathogenic and fibrillogenic full-length Aβ_1-42 species was not examined, nor was the potential role of CLIC1 in mediating microglial activation and neurotoxicity by other stimuli (e.g. ligands for the Toll-like receptors). In the present study, we utilized a two chamber Transwell? cell culture system to allow separate treatment of microglia and neurons while examining the effect of pharmacological blockade of CLIC1 in protecting cortical neurons from toxicity caused by Aβ_1-42- and lipopolysaccaride-stimulated microglia. Presentation of Aβ_1-42 to the upper, microglia-containing chamber resulted in a progressive loss of neurons over 3 days. Neuronal cell injury was prevented by the CLIC1 ion channel blockers IAA-94 [(R(+)-[(6,7-dichloro-2-cyclopentyl-2,3-dihydro-2-methyl-1-oxo-1H-inden-5yl)-oxy] acetic acid)] and niflumic acid (2-{[3-(trifluoromethyl)phenyl]amino}nicotinic acid) when presented to the upper chamber only. Incubation of microglia with lipopolysaccharide plus interferon-γ led to neuronal cell injury which, however, was insensitive to inhibition by the CLIC1 channel blockers, suggesting a degree of selectivity in agents leading to CLIC1 activation.