Cloning the polB gene of Escherichia coli and identification of its product

Using an in vivo mini-Mu cloning system, we have cloned the polB gene of Escherichia coli into the multicopy plasmid, pUC18. A chromosomal insert of 4.9 kilobases gave 30-40-fold overproduction of DNA polymerase II, and the cells containing the plasmid showed normal growth. The restriction pattern of the polB gene does not match that of either the polA gene or polC gene. Plasmid-directed protein synthesis demonstrates peptides of 99 and 82 kDa which are not expressed by derivative plasmids without DNA polymerase II activity. It appears from in situ gel assays and high performance liquid chromatography that 82- and 55-kDa proteins are derived from the 99-kDa protein by degradation, but all retain activity. DNA polymerase I or DNA polymerase III antibody does not inhibit the synthesis reaction of partially purified DNA polymerase II, but DNA polymerase II antibody does. By the criteria of restriction pattern of the polB gene, molecular weight of the protein, and antibody inhibition of reaction, DNA polymerase II can be demonstrated to be a distinct DNA polymerase.     

Cloning of the aroP gene and identification of its product in Escherichia coli K-12.

The aroP gene of Escherichia coli K-12 was located in a ca. 1.2-kilobase region of DNA. The aroP gene product was identified as a membrane-bound protein with an apparent molecular weight of approximately 37,000.     

Cloning of the Escherichia coli endo-1,4-D-glucanase gene and identification of its product

A plasmid (pYP17) containing a genomic DNA insert from Escherichia coli K-12 that confers the ability to hydrolyze carboxymethylcellulose (CMC) was isolated from a genomic library constructed in the cosmid vector pLAFR3 in E. coli DH5α. A small 1.65-kb fragment, designated bcsC (pYP300), was sequenced and found to contain an ORF of 1,104 bp encoding a protein of 368 amino acid residues, with a calculated molecular weight of 41,700 Da. BcsC carries a typical prokaryotic signal peptide of 21 amino acid residues. The predicted amino acid sequence of the BcsC protein is similar to that of CelY of Erwinia chrysanthemi, CMCase of Cellulomonas uda, EngX of Acetobacter xylinum, and CelC of Agrobacterium tumefaciens. Based on these sequence similarities, we propose that the bcsC gene is a member of glycosyl hydrolase family 8. The apparent molecular mass of the protein, when expressed in E. coli, is approximately 40 kDa, and the CMCase activity is found mainly in the extracellular space. The enzyme is optimally active at pH 7 and a temperature of 40° C. Received: 6 February 1998 / Accepted: 6 November 1998     

Cloning of the uvrD gene of E. coli and identification of the product

The uvrD gene has been cloned from Escherichia coli chromosomal DNA into phage lambda, cosmid, and low-copy-number plasmid vectors. Comparison of the proteins encoded by the cloned fragments with those encoded by fragments in which the uvrD gene is inactivated by transposon insertion or by deletion shows that the uvrD gene product is a protein of Mr = 73000.     

Cloning the spoT gene of Escherichia coli: identification of the spoT gene product.

We have isolated five specialized transducing lambda bacteriophages (lambda dpyrE spoT) carrying the pyrE and spoT genes of Escherichia coli. A fragment from one of these phages was used as the source of DNA to clone the spoT and pyrE genes on a multicopy plasmid, pBR322. Insertions and deletions in this plasmid were obtained. These plasmids were used to transform a minicell-producing strain, and the gene products synthesized were determined. Our experiments demonstrate that the spoT and pyrE genes are separated by about 4 magadaltons and suggest that the spoT gene product is a protein whose molecular weight is 80,000. The strain in which the spoT+ allele is carried on a plasmid produced nine times more spoT gene activity than a normal spoT+ strain when assayed in crude extracts. This strain was used to prepare partially purified gene product, guanosine 5'-diphosphate, 3'-diphosphate pyrophosphatase. The enzyme has the following characteristics. (i) It hydrolyzes pyrophosphate from the 5'-pyrophosphate of guanosine 5'-diphosphate, 3'-diphosphate, yielding GDP and pyrophosphate. (ii) Its activity is strongly stimulated by Mn2+ and slightly stimulated by salt. (iii) Its activity is inhibited by uncharged tRNA. There are also two additional activities in the cell extract which degrade guanosine in 5'-diphosphate, 3'-diphosphate in vitro but which are not specified by the spoT gene.     

Cloning and sequencing of the gene for Tetrahymena calcium-binding 25-kDa protein (TCBP-25)

With the intention of studying calcium-dependent ciliary reversal in Tetrahymena, we isolated a Tetrahymena calcium-binding protein of 10 kDa (TCBP-10) which was not calmodulin and reported its properties (Ohnishi, K., and Watanabe, Y. (1983) J. Biol. Chem. 258, 13978-13985). However, immunoblotting with an antiserum against TCBP-10 and sequencing of the cDNAs and partial genomic DNAs for this calcium-binding protein prove that this previously reported TCBP-10 is the degraded product of a 25-kDa calcium-binding protein. Thus, we correct the name of the protein from TCBP-10 to TCBP-25. From the analysis of the cDNA for TCBP-25, it is shown to be composed of 218 amino acid residues and its molecular weight is estimated to be 24,702. This protein is predicted to contain four EF-hand-type calcium binding domains and to be a member of the calmodulin family. Little sequence homology with other proteins was shown by a computer search, except in the EF-hand regions. The special feature of TCBP-25 is that the distance between calcium-binding domains II and III is extraordinarily long for a calmodulin family protein having four calcium-binding domains. The genomic DNA for TCBP-25 contains two introns situated at short distances before calcium-binding domains I and III, implying gene duplication in genealogy.     

Cloning and identification of the product of the dnaE gene of Escherichia coli

We successively subcloned the dnaE gene of Escherichia coli into pBR322, resulting in a plasmid that contains 4.6 kilobases of E. coli DNA. This plasmid can complement a dnaE temperature-sensitive mutation. A restriction map of the dnaE gene and the surrounding 10.7-kilobase region of the E. coli chromosome was determined. A unique HindIII restriction endonuclease site within the cloned segment of DNA was identified as a site required for expression of the dnaE gene. By using the maxicell plasmid-directed protein synthesizing system, we demonstrated that dnaE codes for the alpha subunit of DNA polymerase III.     

Cloning and sequencing of Serratia protease gene.

The gene encoding an extracellular metalloproteinase from Serratia sp. E-15 has been cloned, and its complete nucleotide sequence determined. The amino acid sequence deduced from the nucleotide sequence reveals that the mature protein of the Serratia protease consists of 470 amino acids with a molecular weight of 50,632. The G+C content of the coding region for the mature protein is 58%; this high G+C content is due to a marked preference for G+C bases at the third position of the codons. The gene codes for a short pro-peptide preceding the mature protein. The Serratia protease gene was expressed in Escherichia coli and Serratia marcescens; the former produced the Serratia protease in the cells and the latter in the culture medium. Three zinc ligands and an active site of the Serratia protease were predicted by comparing the structure of the enzyme with those of thermolysin and Bacillus subtilis neutral protease.     

Cloning of the recA gene of Bordetella pertussis and characterization of its product.

A recA gene of Bordetella pertussis was identified in a plasmid library by complementation of a recA mutation in E coli and subcloned as a 2.1-kb Sph I DNA fragment. Southern hybridization experiments showed no similarity to the E coli recA gene, but very strong similarity to other Bordetella species. E coli recA mutant cells containing the B pertussis recA gene at high gene dosage were resistant to DNA-damaging agents such as methyl methane sulfonate or 4-nitroquinoline-N-oxide, displayed induction of SOS functions, and were able to promote DNA recombination, but not induction of phage lambda. The latter phenotype distinguishes the B pertussis recA gene product from the corresponding proteins from most other Gram-negative organisms. Amino acid sequence comparisons revealed a high degree of structural conservation between prokaryotic RecA proteins.     

Cloning of the methionine regulatory gene, metJ, of Escherichia coli K12 and identification of its product

Both wild-type and mutant forms of the methionine regulatory gene, metJ, of Escherichia coli K12 have been cloned in derivatives of pBR322. In cells carrying plasmids with a functional copy of metJ, the methionine regulon appears to be repressed even under conditions of methionine limitation. Maxicell labeling experiments show that the plasmids code for a small peptide (12 kilodaltons) only when they carry a functional copy of metJ. The lesions in five independently isolated metJ mutants are located in, or slightly upstream from, a coding sequence proposed to be metJ by Saint-Girons, I., Duchange, N., Cohen, G. N., and Zakin, M. M. [1984) J. Biol. Chem. 259, 14282-14285).     

Cloning and sequencing of the bovine gastrin gene

In order to deduce the primary structure of bovine preprogastrin we therefore sequenced a gastrin DNA clone isolated from a bovine liver cosmid library. Bovine preprogastrin comprises 104 amino acids and consists of a signal peptide, a 37 amino acid spacer-sequence, the gastrin-34 sequence followed by an amidation-site (Gly-Arg-Arg), and a C-terminal nonapeptide. Comparison with human, porcine, and rat cDNA sequences revealed extensive homology in the coding region as well as in short noncoding structures.     

Cloning and sequencing of Escherichia coli murZ and purification of its product, a UDP-N-acetylglucosamine enolpyruvyl transferase.

The Escherichia coli gene murZ, encoding the enzyme UDP-N-acetylglucosamine enolpyruvyl transferase, has been cloned and sequenced. Identified by screening an E. coli genomic library for clones that conferred phosphomycin resistance, murZ encoded a 419-amino-acid polypeptide and was mapped to 69.3 min on the E. coli chromosome. MurZ protein was purified to near homogeneity and found to have the expected UDP-N-acetylglucosamine enolpyruvyl transferase activity. Sequence analysis of the predicted product revealed 44% identity to OrfR from Bacillus subtilis (K. Trach, J.W. Chapman, P. Piggot, D. LeCoq, and J.A. Hoch, J. Bacteriol. 170:4194-4208, 1988), suggesting that orfR may also encode a UDP-N-acetylglucosamine enolpyruvyl transferase enzyme. MurZ is also homologous to the aromatic amino acid biosynthetic enzyme enolpyruvyl shikimate phosphate synthase, the other enzyme known to catalyze an enolpyruvyl transfer.     

Tetrahymena actin: localization and possible biological roles of actin in Tetrahymena cells

Though actin is ubiquitous in eukaryotes, its existence has not been clearly proven in Tetrahymena. Recently, we have succeeded in cloning and sequencing the Tetrahymena actin gene using a Dictyostelium actin probe (Hirono, M. et al. (1987) J. Mol. Biol. 194, 181-192). The primary structure of the Tetrahymena actin deduced from the nucleotide sequence of its gene is greatly divergent from those of other known actins, making it necessary to ascertain whether the predicted Tetrahymena actin is indeed an actin. In this paper, we investigated the localization of the predicted Tetrahymena actin by an immunofluorescence technique using antibody against its synthetic N-terminal peptide, in order to elucidate its possible biological roles. The results showed that immunofluorescence was localized in the division furrow of the dividing cell, and in the intranuclear filament bundles formed in cells exposed to heat shock or DMSO. In addition, the oral apparatus and the proximity of the cytoproct, which are organelles involved in endocytosis and exocytosis, respectively, also fluoresced. Thus, we conclude that the Tetrahymena actin we identified is indeed an actin and plays the same biological roles as ubiquitous actins do, although it is considerably divergent in its amino acid sequence.     

Cloning of the Bacillus firmus OF4 cls gene and characterization of its gene product

The gene that codes for cardiolipin (CL) synthase and an adjacent gene that codes for a MecA homolog in the alkaliphilic bacteria Bacillus firmus OF4 have been cloned and sequenced (GenBank accession number U88888). The cls gene contains 1509 nucleotides, corresponding to a polypeptide of 57.9 kDa. The predicted amino acid sequence has 129 identities and 100 similarities with the Escherichia coli CL synthase. Homologies were also noted with polypeptide sequences from putative cls genes from Bacillus subtilis and Psuedomonas putida. Conserved histidine, tyrosine, and serine residues may be part of the active site and participate in phosphatidyl group transfer. The B. firmus OF4 cls gene product was inserted into plasmid pET3 to form a recombinant plasmid pDG2, which overproduces CL synthase in E. coli. A membrane fraction containing the overproduced enzyme converts phosphatidylglycerol to CL and glycerol. The B. firmus enzyme is stimulated by potassium phosphate, inhibited by CL and phosphatidate, and has a slightly higher pH optimum than the E. coli enzyme.     

Cloning of the cysB gene of Erwinia carotovora subsp. carotovora, and the identification of its product

Summary The suicide vector pJB4JI was used to generate a range of Tn5-induced mutants of Erwinia carotovora subsp. carotovora (Ecc). One mutant, HC500, was a cysteine auxotroph which had a non-pectolytic, non-cellulolytic, non-proteolytic phenotype when grown under sulphate-limitation. The cysteine lesion of HC500 was shown to be analogous to the cysB mutation of Escherichia coli. The Ecc-cysB ⁺ gene product was identified as a protein of M_r 36000.