Chiral separation of catechin by capillary electrophoresis using mono‐, di‐, tri‐succinyl‐β‐cyclodextrin as chiral selectors

The chiral separation of (±)‐catechin was investigated by capillary electrophoresis using characterized succinyl‐β‐cyclodextrins (Suc‐β‐CDs) with one to three degree of substitution values. The effects of nature and concentration of Suc‐β‐CDs and running buffer pH on the migration time and resolution of (±)‐catechin are discussed. All three kinds of Suc‐β‐CDs show a clear baseline separation of (±)‐catechin in capillary electrophoresis. Mono‐Suc‐β‐CD effectively separated (±)‐catechin, and additional substituted CDs (di‐ and tri‐Suc‐β‐CD) were capable of chiral separation at a broad pH range. The optimum running conditions were found to be 100 mM borate buffer (pH 9.8) containing 5 mM mono‐Suc‐β‐CD with no methanol organic modifier. Chirality, 2009. © 2009 Wiley‐Liss, Inc.     

Role of capillary electrophoresis methods in the drug development process

In the past several years, capillary electrophoresis (CE) has generated considerable interest from pharmaceutical companies for control of both the chiral and achiral purity of bulk drugs and drug products. This paper evaluates the use of CE as: (1) a technique complementary to HPLC for the determination of peak homogeneity of a drug, (2) for determination of chiral purity, and (3) for determination of achiral purity. It would be greatly advantageous if CE could be used to determine both the chiral and achiral purity in a single assay. This investigation compares the results obtained for the separation of the enantiomers of duloxetine using several neutral cyclodextrins to those obtained using anionic cyclodextrins (sulfobutyl ether derivatives) as chiral selectors added to the separation buffer. In addition, it reports chiral separations obtained by using neutral cyclodextrins in a sulfonic acid-coated capillary column, which give a negatively charged capillary surface and electro-osmotic flow even in low pH buffers. The possible mechanism of separation is discussed. © 1996 Wiley-Liss, Inc.     

Comparison of chiral recognition capabilities of cyclodextrins for the separation of basic drugs in capillary zone electrophoresis

The enantiomeric separation of some racemic anti-histamines and anti-malarials, namely (±)-pheniramine, (±)-brompheniramine, (±)-chlorpheniramine, (±)-doxylamine, and (±)-chloroquine, was investigated by capillary zone electrophoresis. The enantiomeric separation of five compounds was obtained by addition of 7 mM (1%, w/v) sulfated-β-cyclodextrin into the buffer as a chiral selector. The effects of sulfated-β-cyclodextrin concentration and buffer pH on migration and resolution are discussed. Two other cyclodextrins, carboxyethylated-β-cyclodextrin and hydroxypropyl-β-cyclodextrin were also investigated. Four of the racemic compounds were resolved using 14 mM (2%, w/v) carboxyethylated-β-cyclodextrin while 28 mM (4%, w/v) hydroxypropyl-β-cyclodextrin resolved only two of them. It was found that the type of substituent and the degree of substitution on the rim of the CD structure played an important role in enhancing the chiral recognition. Cyclodextrins with negatively charged substituents and higher degree of substitution on the rim of the structure proved to give better resolution to the cationic racemic compounds compared with cyclodextrin with neutral substituents. This is due to the countercurrent mobility of the negatively charged cyclodextrin relative to the cationic analytes thus allowing for a smaller difference in interaction constants to achieve a successful resolution of enantiomers. Furthermore, lower concentrations of negatively charged cyclodextrins were necessary to achieve the equivalent resolutions as compared with the neutral ones.     

A chiral enantioseparation generic strategy for anti‐Alzheimer and antifungal drugs by short end injection capillary electrophoresis using an experimental design approach

The present study describes a generic strategy using capillary electrophoretic (CE) method for chiral enantioseparation of anti‐Alzheimer drugs, namely, donepezil (DON), rivastigmine (RIV), and antifungal drugs, namely, ketoconazole (KET), Itraconazole (ITR), fluconazole (FLU), and sertaconazole (SRT) in which these drugs have different basic and acidic properties. Several modified cyclodextrins (CDs) were applied for enantioseparation of racemates such as highly sulfated α, γ CDs, hydroxyl propyl‐β‐CD, and Sulfobutyl ether‐β‐CD. The starting screening conditions consist of 50‐mM phosphate‐triethanolamine buffer at pH 2.5, an applied voltage of 15 kV, and a temperature of 25°C. The CE strategy implemented in the separation starts by screening prior to the optimization stage in which an experimental design is applied. The design of experiment (DOE) was based on a full factorial design of the crucial two factors (pH and %CD) at three levels, to make a total of nine (3²) experiments with high, intermediate, and low values for both factors. Evaluation of the proposed strategy pointed out that best resolution was obtained at pH 2.5 for five racemates using low percentages of HS‐γ‐CD, while SBE‐β‐CD was the most successful chiral selector offering acceptable resolution for all the six racemates, with the best separation at low pH values and at higher %CD within 10‐min runtime. Regression study showed that the linear model shows a significant lack of fit for all chiral selectors, anticipating that higher orders of the factors are most likely to be present in the equation with possible interactions.     

Chiral separation of 2,3-allenoic acid by capillary zone electrophoresis using cyclodextrin derivatives

In this paper, five of six samples of 2,3-allenoic acid enantiomers were separated by capillary zone electrophoresis (CZE) using hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD) as chiral selectors. Using HP-beta-CD for chiral separation, three of the six enantiomers were separated. Five experimental conditions including HP-beta-CD concentration, pH, buffer concentration, temperature, and running voltage were investigated for their influence on separation and migration using enantiomers of 2-methyl-4-phenyl-2,3-butadienoic acid (A) and 2-(n-propyl)-4-phenyl-2,3-butadienoic acid (B) as samples. Good separation results were observed when [HP-beta-CD] = 3-12 mmol/L and pH = 7-9 for samples A and B. The temperature range of 15-25 degrees C can be selected for convenience. According to the chiral separation results, HP-beta-CD and HP-gamma-CD should be valuable selectors to separate 2,3-allenoic acids and HP-gamma-CD was suggested to separate the 2,3-allenoic acid samples with a group at 4-position bulkier than phenyl.     

Chiral Separation of Uncharged Pomalidomide Enantiomers Using Carboxymethyl‐β‐Cyclodextrin: A Validated Capillary Electrophoretic Method

The racemic mixture of pomalidomide (POM), a second‐generation immunomodulatory uncharged drug, was separated into enantiomers by capillary zone electrophoresis for the first time. Seven different chargeable cyclodextrin (CD) derivatives were screened as complexing agents and chiral selectors, investigating the stability of the POM‐CD inclusion complexes and their enantiodiscriminating capacities. Based on preliminary experiments, carboxymethyl‐β‐CD (CM‐β‐CD) was found to be the most effective chiral selector. Factors influencing enantioseparation were systematically optimized, using an orthogonal experimental design. Optimal parameters (background electrolyte [BGE]: 50 mM Tris‐acetate buffer, pH 6.5, containing 15 mM CM‐β‐CD; capillary temperature: 20°C; voltage applied +15 kV) allowed baseline separation of POM enantiomers with a resolution as high as 4.87. The developed method was validated, in terms of sensitivity (limit of detection and limit of quantification), linearity, accuracy, repeatability, and intermediate precision. Chirality 28:199–203, 2016. © 2015 Wiley Periodicals, Inc.     

Gas-chromatographic approach to probe the absence of molecular inclusion in enantioseparations by carbohydrates. Investigation of linear dextrins ("acyclodextrins") as novel chiral stationary phases

Acetylated/silylated maltooligosaccharides with different degrees of oligomerization have been tested as chiral stationary phases for enantioselective gas chromatography. The acyclic dextrin derivatives carrying tert-butyldimethylsilyl groups at the primary hydroxyl sites and acetyl groups at the secondary hydroxyl sites showed an unexpected ability for the enantioseparation of alpha-amino acid derivatives and halogenated compounds, in addition to some underivatized chiral compounds. Some examples of an improved enantioselectivity invoked by the linear CSPs as compared to that of cyclic oligosaccharides are demonstrated in this work. The results highlight the role of the polar external surface of the selector in lieu of the well-established inclusion mechanism of enantiorecognition by cyclic dextrins. Thus, the enantioseparation of chiral compounds on linear dextrin derivatives--devoid of a molecular cavity--sheds a new light on the mechanisms of enantiorecognition by cyclodextrin derivatives. In contrast to cyclodextrins, linear dextrins are readily accessible in both enantiomeric forms.     

Dichloro-, dimethyl-, and chloromethylphenylcarbamate derivatives of cyclodextrins as chiral stationary phases for high-performance liquid chromatography

New dichloro-, dimethyl-, and chloromethylphenylcarbamate derivatives of cyclodextrins (CDs) were prepared and their enantiomeric recognition abilities were evaluated as chiral stationary phases (CSPs) in normal phase high-performance liquid chromatography (HPLC). The effects of the type of cyclodextrins, the nature and position of the substituents on the phenyl ring, binding mode and spacer on the chiral recognition were studied in detail. No marked change of chiral recognition abilities was established by reversing the binding side of CDs (i.e., by the narrower [primary] opening of the cone-shaped CD to silica gel with the wider [secondary] opening sides). This result indirectly proves the previously drawn conclusion about the minor role of inclusion phenomena in chiral recognition in this case. Nevertheless, chiral recognition of these CSPs toward some compounds critically depends on the type of CDs used. All CD derivatives described in this study show rather low enantiomeric resolving abilities compared with corresponding polysaccharide (cellulose and amylose) derivatives, although very high enantioselectivity of separation was observed for a few compounds, such as racemic flavanone and cyclopropanedicarboxilic acid dianilide. © 1996 Wiley-Liss, Inc.     

Enantioseparation of beta-methyl-substituted amino acids with cyclodextrins by capillary zone electrophoresis

Direct capillary zone electrophoretic methods were developed for the separation of the enantiomers of unnatural beta-methyl-amino acids such as erythro- and threo-beta-methylphenylalanine, beta-methyltyrosine, beta-methyltryptophan and beta-methyl-1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid. Capillary zone electrophoresis was carried out using sulfopropylated-alpha-CD (SP2-alpha-CD), sulfopropylated-beta-CD (SP2-beta-CD) both with a degree of substitution of 2 moles/mole cyclodextrin, and sulfopropylated-beta-CD (SP4-beta-CD) with a degree of substitution of 4moles/mole beta-cyclodextrin. The effects of selector and buffer concentrations, electrolyte pH and applied voltage were studied on the separation efficiency. Varying the electrophoretic conditions with application of 20 kV, hydrodynamic injection, unmodified silica capillary, three different buffers (borate, phosphate and acetate) and modified cyclodextrins as chiral selectors all compounds investigated are nearly baseline resolved. The elution sequence was determined in most cases.     

Enantiomeric separation of chiral ruthenium(II) complexes using capillary electrophoresis

Capillary zone electrophoresis (CZE) and micellar capillary electrophoresis (MCE) were applied for the enantiomeric separation of nine mononuclear tris(diimine)ruthenium(II) complexes as well as the separation of all stereoisomers of a dinuclear tris(diimine)ruthenium(II) complex. Nine cyclodextrin (CD) based chiral selectors were examined as run buffer additives to evaluate their effectiveness in the enantiomeric separation of tris(diimine)ruthenium(II) complexes. Seven showed enantioselectivity. Sulfated gamma-cyclodextrin (SGC), with four baseline and three partial separations, was found to be the most useful chiral selector. In CZE mode, the derivatized gamma-CDs were more effective than beta-CDs while sulfated CDs work better than carboxymethyl CDs. In MCE mode, hydroxypropyl beta-CD separated the greatest number of tris(diimine) ruthenium(II) complexes. The effects of chiral selector concentration, run buffer pH and concentration, the concentration ratio between chiral selector and other factors were investigated.     

Separation of cefoperazone enantiomers using beta-cyclodextrin as chiral additive by capillary zone electrophoresis

A capillary electrophoresis method was developed to separate the enantiomers of cefoperazone. Different cyclodextrins, including alpha-cyclodextrin (alpha-CD), beta-cyclodextrin (beta-CD), gamma-cyclodextrin (gamma-CD), 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD), and methyl-beta-cyclodextrin (Me-beta-CD), were tested as chiral additives in the running buffer. The effect of various parameters on enantioseparation such as concentration of NaH(2)PO(4), buffer pH, and CD concentration was also studied. The cefoperazone enantiomers were baseline separated under conditions of 0.04 mmol/L beta-CD, 75 mmol/L NaH(2)PO(4) buffer at pH 4.0. A fused silica capillary (40 cm effective length x 75 microm ID) was used. The applied voltage and capillary temperature were 20 kV and 25 degrees C, respectively. Under these conditions, linear calibration curves were obtained in the 5-500 microg/ml range using UV detection at 280 nm. The limit of detection for both isomers was 0.1 microg/ml. The method was used for the analysis of different pharmaceutical preparations (dose) and biological samples containing cefoperazone.     

Analysis of optical purity and impurity of synthetic D-phenylalanine products using sulfated beta-cyclodextrin as chiral selector by reversed-polarity capillary electrophoresis

A new capillary electrophoresis (CE) method has been achieved for simultaneous separation and quantification of phenylalanine, N-acetylphenylalanine enantiomers, and prochiral N-acetylaminocinnamic acid, possibly co-existent in reaction systems or synthesized products of D-phenylalanine. The separation was carried out in an uncoated capillary under reversed-electrophoretic mode. Among the diverse charged cyclodextrins (CDs) examined, highly sulfated (HS)-beta-CD as the chiral selector exhibited the best enantioselectivity. The complete separation of the analytes was obtained under the optimum conditions of pH 2.5, 35 mM Tris buffer containing 4% HS-beta-CD, applied voltage -15 kV, and capillary temperature 25 degrees C. Furthermore, the proposed method was applied to the determination of optical purity and trace impurities in three batches of the asymmetric synthetic samples of D-phenylalanine, and satisfactory results were obtained. The determination recoveries of the samples were in the range of 97.8-103.8%, and precisions fell within 2.3-5.0% (RSD). The results demonstrate that this CE method is a useful, simple technique and is applicable to purity assays of D-phenylalanine.     

Gas chromatographic enantioseparation of unfunctionalized chiral alkanes: a challenge in separation science (overview, state of the art, and perspectives)

The chromatographic enantioseparation of small unfunctionalized chiral alkanes C*HR(1)R(2)R(3) (R = alkyl) represents a challenge in separation science. Because of the lack of any functional groups, enantiorecognition in the presence of a chiral selector is solely based upon weak enantioselective Van der Waals forces. Racemic alkanes containing seven and eight carbon atoms, i.e. 3-methylhexane (C7), 2,3-dimethylpentane (C7), 3-methylheptane (C8), 3,4-dimethylhexane (C8), 2,4-dimethylhexane (C8), 2,3-dimethylhexane (C8), and 2,2,3-trimethylpentane (C8) have been gas chromatographically enantioseparated on different modified cyclodextrins. The substitution pattern and cavity size of the cyclodextrin selectors have a pronounced effect on the degree of enantiorecognition observed. Thermodynamic parameters of enantiorecognition between four chiral alkanes and octakis(6-O-methyl-2,3-di-O-pentyl)-gamma-cyclodextrin (Lipodex G) have been determined. The possible role of molecular inclusion is indicated by the complete loss of enantioselectivity when the cyclodextrins are replaced by the corresponding linear dextrins ("acyclodextrins"). The enantioseparations of all seven chiral C7-C8 alkanes, six of them simultaneously, has been achieved on mixed binary selector systems whereby two different modified cyclodextrins are present in one gas chromatographic column. The smallest chiral (nonisotopically labeled) allene, i.e., 2,3-pentadiene, has been resolved gas chromatographically on a cyclodextrin selector.     

Simultaneous determination of phenylethanoid glycosides and aglycones by capillary zone electrophoresis with running buffer modifier

Although the separation efficiency of capillary electrophoresis (CE) is much higher than that of other chromatographic methods, it is sometimes difficult to adequately separate the complex ingredients in biological samples. This article describes how one effective and simple way to develop the separation efficiency in CE is to add some modifiers to the running buffer. The suitable running buffer modifier β-cyclodextrin (β-CD) was explored to fast and completely separate four phenylethanoid glycosides and aglycones (homovanillyl alcohol, hydroxytyrosol, 3,4-dimethoxycinnamic acid, and caffeic acid) in Lamiophlomis rotata (Lr) and Cistanche by capillary zone electrophoresis with ultraviolet (UV) detection. It was found that when β-CD was used as running buffer modifier, a baseline separation of the four analytes could be accomplished in less than 20 min and the detection limits were as low as 10⁻³ mg L⁻¹. Other factors affecting the CE separation, such as working potential, pH value and ionic strength of running buffer, separation voltage, and sample injection time, were investigated extensively. Under the optimal conditions, a successful practical application on the determination of Lr and Cistanche samples confirmed the validity and practicability of this method.     

Separation and determination of warfarin enantiomers in human plasma samples by capillary zone electrophoresis using a methylated β-cyclodextrin-containing electrolyte

A methyl β-cyclodextrin with a degree of substitution of 1.8 proved to be an effective chiral selector, among other cyclodextrins tested, for the separation of warfarin enantiomers by capillary electrophoresis. The operating conditions were optimized with respect to electrolyte composition (buffer pH, ionic strength, cyclodextrin concentration, methanol content) and applied voltage. The influence of a high ionic strength on the resolution was clearly shown. A baseline separation can be obtained in less than 15 min with an efficiency of ca. 250 000 theoretical plates. These conditions were applied to the determination of warfarin enantiomers in the plasma of patients under warfarin therapy. The limit of detection for the whole procedure (dichloromethane extraction followed by evaporation to dryness and capillary electrophoresis) was of the order of 0.2 mg/l (6.5 · 10⁻⁷M) of each enantiomer.     

Chiral separations of 1,3,4-thia- and 1,3,4-selenadiazine derivatives by use of non-aqueous capillary electrophoresis

Our aim was to establish suitable conditions for the chiral separation of 12 1,3,4-thia- and 1,3,4-selenadiazine derivatives; some of them were identified in screening tests as potential antituberculotics. To overcome possible problems with the water insolubility of most analytes, we profited by the advantages of non-aqueous capillary electrophoresis. Methanol, formamide, and a mixture of formamide with acetonitrile (1:2, v/v) were used as separation media. Hydroxyethyl-, hydroxypropyl-, and methyl-beta-cyclodextrin were applied as chiral selectors in concentrations of 200 mM. Besides the effect of these different electrophoretic media and selectors, we also investigated the consequences of using different electrolytes (25 mM ammonium acetate/1 M acetic acid and 25 mM citric acid/12.5 mM TRIS). Distinct differences of the separation factors in the different separation media were observed. Depending on structure characteristics of the analytes, we established clear classifications to these cyclodextrins (CD), which were most appropriate for the separation of the enantiomers of the particular analytes.     

Enantioseparation of nine indanone and tetralone derivatives by HPLC using carboxymethyl‐β‐cyclodextrin as the mobile phase additive

High‐performance liquid chromatography (HPLC) is a powerful method in the area of chiral separation. In this study, a method of HPLC using carboxymethyl‐β‐cyclodextrin (CM‐β‐CD) as chiral selector was developed for enantioseparation of nine indanone and tetralone derivatives. The separation was performed on a conventional C₁₈ column. The optimal mobile phase was a mixture of methanol and 0.05 mol/L phosphate buffer at pH 1.8 (55:45, v /v) containing 22.9 mmol/L CM‐β‐CD. Under such conditions, the resolutions of all analytes were over 1.8 except for Compound F. The results of the study indicate the presence of a complex with 1:1 stoichiometry of the inclusion complex. In addition, it can be inferred from thermodynamic analysis that the behavior of formation of the inclusion complex and enantioseparation occurred simultaneously, while they were driven by different forces. The effect of analyte structure is also discussed.     

Evaluation of quantitative structure property relationships necessary for enantioresolution with lambda- and sulfobutylether lambda-carrageenan in capillary electrophoresis

Lambda-carrageenan, a linear, high molecular weight sulfated polysaccharide, was successfully employed in both its native and sulfobutyl derivatized form as a chiral selector in capillary electrophoresis for the separation of enantiomers of basic pharmaceutical compounds. In order to characterize the chiral selectivity properties of this chiral selector, various structurally related racemic compounds were analyzed for enantiomeric interactions using capillary electrophoresis. The results of these studies were then rationalized and analyzed utilizing a general quantitative structure-property relationship (QSPR) evaluation in order to predict critical analyte structural requirements for successful enantiomeric separation. Important structural components of the analytes were found to include the aromatic content, the type of substitution on the aromatic ring, presence of a primary or secondary protonated amine, and an overall positive charge to the molecule.     

Capillary electrophoresis of glutamate and aspartate in rat brain dialysate Improvements in detection and analysis time using cyclodextrins

Addition of cyclodextrins (CDs) to the electrolyte buffer in the capillary zone electrophoresis (CZE) separation of derivatized amino acids was evaluated in terms of fluorescence signal enhancement, resolution, and migration time effects. Maximum fluorescence signal enhancement was observed with separation buffers containing 4M β-cyclodextrin or 10 mM hydroxypropyl β-cyclodextrin. Resolution values decreased as the CD concentrations increased. Migration times were dependent on CD concentration. Inclusion complex formation constants calculated using changes in migration time showed slight agreement with those calculated by the steady-state fluorescence enhancement technique. Analysis of 20 μl of rat brain microdialysate by CZE using 4 mM β-cyclodextrin in borate buffer resulted in baseline resolution of glutamate and aspartate in 3.6 min. The results of this work indicate that, when used as separation buffer additives, cyclodextrins are capable of increasing the fluorescence signal and decreasing the migration times of NDA-derivatized acidic amino acids.     

Chiral separation of salbutamol and bupivacaine by capillary electrophoresis using dual neutral cyclodextrins as selectors and its application to pharmaceutical preparations and rat blood samples assay

An attempt for the simultaneous separation of salbutamol (Sal) and bupivacaine (Bup) enantiomers was performed by capillary elecytrophoresis with a dual mixture of neutral cyclodextrins as chiral selector. The influence on the separation of several parameters such as buffer composition, pH, the concentration ratio of 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to dimethyl-beta-cyclodextrin (DM-beta-CD) was investigated. A better separation was obtained for Sal and Bup with the CD mixtures compared to the use of HP-beta-CD or DM-beta-CD alone. The best simultaneous separation of Sal and Bup enantiomers was achieved with a 20 mM HP-beta-CD and 20 mM DM-beta-CD at pH 2.5 in a triethanolamine (TEA)/phosphate buffer. This method-utilized chlorphenamine (Chl) as an internal standard was found to be linear in the range 0.5-100 microg/mL and 0.5-150 microg/mL for Sal and Bup enantiomers, respectively. The limits of detection for both enantiomers of Sal and Bup were 0.18 and 0.24 microg/mL, respectively. The proposed method was applied to monitor Sal and Bup enantiomers concentration change in rat blood samples obtained from a male rat after celiac doses administration 0-30 min of Sal and Bup racemate. The method could also be used to determine Sal enantiomers in a pharmaceutical aerosol.