In situ biosensor for detection miRNA in living cells based on carbon nitride nanosheets with catalytic hairpin assembly amplification

In this study, an ultrasensitive fluorescence turn‐on assay for in situ sensing of intracellular microRNA (miRNA) was developed utilizing a carbon nitride nanosheet (CNNS) and a catalytic hairpin assembly (CHA). The CHA showed favourable signal amplification for low‐level biomarkers, and CNNS was an excellent candidate as a fluorescence quencher and gene vector. Moreover, the hairpin DNA of CHA could be adsorbed onto the surface of CNNS. An enzyme‐free fluorescence biosensor for ultrasensitive sensing of intracellular miRNA in cells based on CHA and CNNS was designed. When faced with target miRNA, the fluorescence was recovered due to the miRNA, which could trigger cycling of CHA circuits, leading to the production of a marked enhanced fluorescence signal. Compared with traditional methods, the proposed method is convenient, with low cytotoxicity, and high specificity and ultrasensitivity. It has promising potential for detection low‐level biomarkers.     

Sensitive and selective amplification of methylated DNA sequences using helper-dependent chain reaction in combination with a methylation-dependent restriction enzymes

We have developed a novel technique for specific amplification of rare methylated DNA fragments in a high background of unmethylated sequences that avoids the need of bisulphite conversion. The methylation-dependent restriction enzyme GlaI is used to selectively cut methylated DNA. Then targeted fragments are tagged using specially designed ‘helper’ oligonucleotides that are also used to maintain selection in subsequent amplification cycles in a process called ‘helper-dependent chain reaction’. The process uses disabled primers called ‘drivers’ that can only prime on each cycle if the helpers recognize specific sequences within the target amplicon. In this way, selection for the sequence of interest is maintained throughout the amplification, preventing amplification of unwanted sequences. Here we show how the method can be applied to methylated Septin 9, a promising biomarker for early diagnosis of colorectal cancer. The GlaI digestion and subsequent amplification can all be done in a single tube. A detection sensitivity of 0.1% methylated DNA in a background of unmethylated DNA was achieved, which was similar to the well-established Heavy Methyl method that requires bisulphite-treated DNA.     

Simple colorimetric DNA detection based on hairpin assembly reaction and target-catalytic circuits for signal amplification

A simple strategy of colorimetric DNA detection is presented based on a hairpin assembly reaction and target-catalytic DNA circuits to achieve enzyme-free signal amplification. The method employed two hairpin species (H1 and H2), which were stable and unable to hybridize in the absence of target. In the presence of target, the target hybridized with hairpin H1 and the opened hairpin H1 hybridized with hairpin H2, allowing the target to be displaced. H1 and H2 were respectively attached to gold nanoparticles, allowing the duplex formed from H1 and H2 to be visualized with the naked eye. The displaced target again triggered the next round of strand exchange reaction to achieve signal amplification. The method may have a wide range of sensor applications because it is enzyme-free and simple to perform.     

Proximity extension of circular DNA aptamers with real-time protein detection

Multivalent circular aptamers or ‘captamers’ have recently been introduced through the merger of aptameric recognition functions with the basic principles of DNA nanotechnology. Aptamers have strong utility as protein-binding motifs for diagnostic applications, where their ease of discovery, thermal stability and low cost make them ideal components for incorporation into targeted protein assays. Here we report upon a property specific to circular DNA aptamers: their intrinsic compatibility with a highly sensitive protein detection method termed the ‘proximity extension’ assay. The circular DNA architecture facilitates the integration of multiple functional elements into a single molecule: aptameric target recognition, nucleic acid hybridization specificity and rolling circle amplification. Successful exploitation of these properties is demonstrated for the molecular analysis of thrombin, with the assay delivering a detection limit nearly three orders of magnitude below the dissociation constants of the two contributing aptamer–thrombin interactions. Real-time signal amplification and detection under isothermal conditions points towards potential clinical applications, with both fluorescent and bioelectronic methods of detection achieved. This application elaborates the pleiotropic properties of circular DNA aptamers beyond the stability, potency and multitargeting characteristics described earlier.     

SYMBIOSIS: synthetic manipulable biobricks via orthogonal serine integrase systems

Serine integrases are emerging as one of the most powerful biological tools for synthetic biology. They have been widely used across genome engineering and genetic circuit design. However, developing serine integrase-based tools for directly/precisely manipulating synthetic biobricks is still missing. Here, we report SYMBIOSIS, a versatile method that can robustly manipulate DNA parts in vivo and in vitro. First, we propose a ‘keys match locks’ model to demonstrate that three orthogonal serine integrases are able to irreversibly and stably switch on seven synthetic biobricks with high accuracy in vivo. Then, we demonstrate that purified integrases can facilitate the assembly of ‘donor’ and ‘acceptor’ plasmids in vitro to construct composite plasmids. Finally, we use SYMBIOSIS to assemble different chromoprotein genes and create novel colored Escherichia coli. We anticipate that our SYMBIOSIS strategy will accelerate synthetic biobrick manipulation, genetic circuit design and multiple plasmid assembly for synthetic biology with broad potential applications.     

Meta‐analysis on blood transcriptomic studies identifies consistently coexpressed protein–protein interaction modules as robust markers of human aging

The bodily decline that occurs with advancing age strongly impacts on the prospects for future health and life expectancy. Despite the profound role of age in disease etiology, knowledge about the molecular mechanisms driving the process of aging in humans is limited. Here, we used an integrative network-based approach for combining multiple large-scale expression studies in blood (2539 individuals) with protein–protein Interaction (PPI) data for the detection of consistently coexpressed PPI modules that may reflect key processes that change throughout the course of normative aging. Module detection followed by a meta-analysis on chronological age identified fifteen consistently coexpressed PPI modules associated with chronological age, including a highly significant module (P = 3.5 × 10⁻³⁸) enriched for ‘T-cell activation’ marking age-associated shifts in lymphocyte blood cell counts (R² = 0.603; P = 1.9 × 10⁻¹⁰). Adjusting the analysis in the compendium for the ‘T-cell activation’ module showed five consistently coexpressed PPI modules that robustly associated with chronological age and included modules enriched for ‘Translational elongation’, ‘Cytolysis’ and ‘DNA metabolic process’. In an independent study of 3535 individuals, four of five modules consistently associated with chronological age, underpinning the robustness of the approach. We found three of five modules to be significantly enriched with aging-related genes, as defined by the GenAge database, and association with prospective survival at high ages for one of the modules including ASF1A. The hereby-detected age-associated and consistently coexpressed PPI modules therefore may provide a molecular basis for future research into mechanisms underlying human aging.     

MetaVelvet: an extension of Velvet assembler to de novo metagenome assembly from short sequence reads

An important step in ‘metagenomics’ analysis is the assembly of multiple genomes from mixed sequence reads of multiple species in a microbial community. Most conventional pipelines use a single-genome assembler with carefully optimized parameters. A limitation of a single-genome assembler for de novo metagenome assembly is that sequences of highly abundant species are likely misidentified as repeats in a single genome, resulting in a number of small fragmented scaffolds. We extended a single-genome assembler for short reads, known as ‘Velvet’, to metagenome assembly, which we called ‘MetaVelvet’, for mixed short reads of multiple species. Our fundamental concept was to first decompose a de Bruijn graph constructed from mixed short reads into individual sub-graphs, and second, to build scaffolds based on each decomposed de Bruijn sub-graph as an isolate species genome. We made use of two features, the coverage (abundance) difference and graph connectivity, for the decomposition of the de Bruijn graph. For simulated datasets, MetaVelvet succeeded in generating significantly higher N50 scores than any single-genome assemblers. MetaVelvet also reconstructed relatively low-coverage genome sequences as scaffolds. On real datasets of human gut microbial read data, MetaVelvet produced longer scaffolds and increased the number of predicted genes.     

High-throughput,cost-effective verification of structural DNA assembly

DNA ‘assembly’ from ‘building blocks’ remains a cornerstone in synthetic biology, whether it be for gene synthesis (∼1 kb), pathway engineering (∼10 kb) or synthetic genomes (>100 kb). Despite numerous advances in the techniques used for DNA assembly, verification of the assembly is still a necessity, which becomes cost-prohibitive and a logistical challenge with increasing scale. Here we describe for the first time a comprehensive, high-throughput solution for structural DNA assembly verification by restriction digest using exhaustive in silico enzyme screening, rolling circle amplification of plasmid DNA, capillary electrophoresis and automated digest pattern recognition. This low-cost and robust methodology has been successfully used to screen over 31 000 clones of DNA constructs at <$1 per sample.     

Hubs with network motifs organize modularity dynamically in the protein-protein interaction network of yeast

Background

It has been recognized that modular organization pervades biological complexity. Based on network analysis, ‘party hubs’ and ‘date hubs’ were proposed to understand the basic principle of module organization of biomolecular networks. However, recent study on hubs has suggested that there is no clear evidence for coexistence of ‘party hubs’ and ‘date hubs’. Thus, an open question has been raised as to whether or not ‘party hubs’ and ‘date hubs’ truly exist in yeast interactome.

Methodology

In contrast to previous studies focusing on the partners of a hub or the individual proteins around the hub, our work aims to study the network motifs of a hub or interactions among individual proteins including the hub and its neighbors. Depending on the relationship between a hub''s network motifs and protein complexes, we define two new types of hubs, ‘motif party hubs’ and ‘motif date hubs’, which have the same characteristics as the original ‘party hubs’ and ‘date hubs’ respectively. The network motifs of these two types of hubs display significantly different features in spatial distribution (or cellular localizations), co-expression in microarray data, controlling topological structure of network, and organizing modularity.

Conclusion

By virtue of network motifs, we basically solved the open question about ‘party hubs’ and ‘date hubs’ which was raised by previous studies. Specifically, at the level of network motifs instead of individual proteins, we found two types of hubs, motif party hubs (mPHs) and motif date hubs (mDHs), whose network motifs display distinct characteristics on biological functions. In addition, in this paper we studied network motifs from a different viewpoint. That is, we show that a network motif should not be merely considered as an interaction pattern but be considered as an essential function unit in organizing modules of networks.     

Sensitive isothermal detection of nucleic-acid sequence by primer generation–rolling circle amplification

A simple isothermal nucleic-acid amplification reaction, primer generation–rolling circle amplification (PG–RCA), was developed to detect specific nucleic-acid sequences of sample DNA. This amplification method is achievable at a constant temperature (e.g. 60°C) simply by mixing circular single-stranded DNA probe, DNA polymerase and nicking enzyme. Unlike conventional nucleic-acid amplification reactions such as polymerase chain reaction (PCR), this reaction does not require exogenous primers, which often cause primer dimerization or non-specific amplification. Instead, ‘primers’ are generated and accumulated during the reaction. The circular probe carries only two sequences: (i) a hybridization sequence to the sample DNA and (ii) a recognition sequence of the nicking enzyme. In PG–RCA, the circular probe first hybridizes with the sample DNA, and then a cascade reaction of linear rolling circle amplification and nicking reactions takes place. In contrast with conventional linear rolling circle amplification, the signal amplification is in an exponential mode since many copies of ‘primers’ are successively produced by multiple nicking reactions. Under the optimized condition, we obtained a remarkable sensitivity of 84.5 ymol (50.7 molecules) of synthetic sample DNA and 0.163 pg (~60 molecules) of genomic DNA from Listeria monocytogenes, indicating strong applicability of PG–RCA to various molecular diagnostic assays.     

Sensitive detection of proteins using assembled cascade fluorescent DNA nanotags based on rolling circle amplification

A novel cascade fluorescence signal amplification strategy based on the rolling circle amplification (RCA)-aided assembly of fluorescent DNA nanotags as fluorescent labels and multiplex binding of the biotin-streptavidin system was proposed for detection of protein target at ultralow concentration. In the strategy, fluorescent DNA nanotags are prepared relying on intercalating dye arrays assembled on nanostructured DNA templates by intercalation between base pairs. The RCA product containing tandem-repeat sequences could serve as an excellent template for periodic assembly of fluorescent DNA nanotags, which were presented per protein recognition event to numerous fluorescent DNA nanotags for assay readout. Both the RCA and the multiplex binding system showed remarkable amplification efficiency, very little nonspecific adsorption, and low background signal. Using human IgG as a model protein, the designed strategy was successfully demonstrated for the ultrasensitive detection of protein target. The results revealed that the strategy exhibited a dynamic response to human IgG over a three-decade concentration range from 1.0 pM to 1.0 fM with a limit of detection as low as 0.9 fM. By comparison with the assay of multiple labeling antibodies with the dye/DNA conjugate, the limit of detection was improved by 4 orders. The designed signal amplification strategy would hold great promise as a powerful tool to be applied for the ultrasensitive detection of target protein in immunoassay.     

Exquisite allele discrimination by toehold hairpin primers

The ability to detect and monitor single nucleotide polymorphisms (SNPs) in biological samples is an enabling research and clinical tool. We have developed a surprising, inexpensive primer design method that provides exquisite discrimination between SNPs. The field of DNA computation is largely reliant on using so-called toeholds to initiate strand displacement reactions, leading to the execution of kinetically trapped circuits. We have now similarly found that the short toehold sequence to a target of interest can initiate both strand displacement within the hairpin and extension of the primer by a polymerase, both of which will further stabilize the primer:template complex. However, if the short toehold does not bind, neither of these events can readily occur and thus amplification should not occur. Toehold hairpin primers were used to detect drug resistance alleles in two genes, rpoB and katG, in the Mycobacterium tuberculosis genome, and ten alleles in the Escherichia coli genome. During real-time PCR, the primers discriminate between mismatched templates with Cq delays that are frequently so large that the presence or absence of mismatches is essentially a ‘yes/no’ answer.     

Do different ‘magnocellular tasks’ probe the same neural substrate?

The sensory abnormalities associated with disorders such as dyslexia, autism and schizophrenia have often been attributed to a generalized deficit in the visual magnocellular–dorsal stream and its auditory homologue. To probe magnocellular function, various psychophysical tasks are often employed that require the processing of rapidly changing stimuli. But is performance on these several tasks supported by a common substrate? To answer this question, we tested a cohort of 1060 individuals on four ‘magnocellular tasks’: detection of low-spatial-frequency gratings reversing in contrast at a high temporal frequency (so-called frequency-doubled gratings); detection of pulsed low-spatial-frequency gratings on a steady luminance pedestal; detection of coherent motion; and auditory discrimination of temporal order. Although all tasks showed test–retest reliability, only one pair shared more than 4 per cent of variance. Correlations within the set of ‘magnocellular tasks’ were similar to the correlations between those tasks and a ‘non-magnocellular task’, and there was little consistency between ‘magnocellular deficit’ groups comprising individuals with the lowest sensitivity for each task. Our results suggest that different ‘magnocellular tasks’ reflect different sources of variance, and thus are not general measures of ‘magnocellular function’.     

Detection of Mycobacterium tuberculosis GlcB or HspX Antigens or devR DNA Impacts the Rapid Diagnosis of Tuberculous Meningitis in Children

Background

Tuberculous meningitis (TBM) is the most common form of neurotuberculosis and the fifth most common form of extrapulmonary TB. Early diagnosis and prompt treatment are the cornerstones of effective disease management. The accurate diagnosis of TBM poses a challenge due to an extensive differential diagnosis, low bacterial load and paucity of cerebrospinal fluid (CSF) especially in children.

Methodology/Principal Findings

We describe the utility of ELISA and qPCR for the detection of Mycobacterium tuberculosis (M. tb) proteins (GlcB, HspX, MPT51, Ag85B and PstS1) and DNA for the rapid diagnosis of TBM. CSF filtrates (n = 532) derived from children were classified as ‘Definite’ TBM (M. tb culture positive, n = 29), ‘Probable and Possible’ TBM (n = 165) and ‘Not-TBM’ including other cases of meningitis or neurological disorders (n = 338). ROC curves were generated from ELISA and qPCR data of ‘Definite’ TBM and Non-Tuberculous infectious meningitis (NTIM) samples and cut-off values were derived to provide ≥95% specificity. devR qPCR, GlcB, HspX and PstS1 ELISAs showed 100% (88;100) sensitivity and 96–97% specificity in ‘Definite’ TBM samples. The application of these cut-offs to ‘Probable and Possible’ TBM groups yielded excellent sensitivity (98%, 94;99) and specificity (98%, 96;99) for qPCR and for GlcB, HspX and MPT51 antigen ELISAs (sensitivity 92–95% and specificity 93–96%). A test combination of qPCR with GlcB and HspX ELISAs accurately detected all TBM samples at a specificity of ∼90%. Logistic regression analysis indicated that these tests significantly added value to the currently used algorithms for TBM diagnosis.

Conclusions

The detection of M. tb GlcB/HspX antigens/devR DNA in CSF is likely to improve the utility of existing algorithms for TBM diagnosis and also hasten the speed of diagnosis.     

Sub-typing of rheumatic diseases based on a systems diagnosis questionnaire

Background

The future of personalized medicine depends on advanced diagnostic tools to characterize responders and non-responders to treatment. Systems diagnosis is a new approach which aims to capture a large amount of symptom information from patients to characterize relevant sub-groups.

Methodology

49 patients with a rheumatic disease were characterized using a systems diagnosis questionnaire containing 106 questions based on Chinese and Western medicine symptoms. Categorical principal component analysis (CATPCA) was used to discover differences in symptom patterns between the patients. Two Chinese medicine experts where subsequently asked to rank the Cold and Heat status of all the patients based on the questionnaires. These rankings were used to study the Cold and Heat symptoms used by these practitioners.

Findings

The CATPCA analysis results in three dimensions. The first dimension is a general factor (40.2% explained variance). In the second dimension (12.5% explained variance) ‘anxious’, ‘worrying’, ‘uneasy feeling’ and ‘distressed’ were interpreted as the Internal disease stage, and ‘aggravate in wind’, ‘fear of wind’ and ‘aversion to cold’ as the External disease stage. In the third dimension (10.4% explained variance) ‘panting s’, ‘superficial breathing’, ‘shortness of breath s’, ‘shortness of breath f’ and ‘aversion to cold’ were interpreted as Cold and ‘restless’, ‘nervous’, ‘warm feeling’, ‘dry mouth s’ and ‘thirst’ as Heat related. ‘Aversion to cold’, ‘fear of wind’ and ‘pain aggravates with cold’ are most related to the experts Cold rankings and ‘aversion to heat’, ‘fullness of chest’ and ‘dry mouth’ to the Heat rankings.

Conclusions

This study shows that the presented systems diagnosis questionnaire is able to identify groups of symptoms that are relevant for sub-typing patients with a rheumatic disease.     

PaperClip: rapid multi-part DNA assembly from existing libraries

Assembly of DNA ‘parts’ to create larger constructs is an essential enabling technique for bioengineering and synthetic biology. Here we describe a simple method, PaperClip, which allows flexible assembly of multiple DNA parts from currently existing libraries cloned in any vector. No restriction enzymes, mutagenesis of internal restriction sites, or reamplification to add end homology are required. Order of assembly is directed by double stranded oligonucleotides—‘Clips’. Clips are formed by ligation of pairs of oligonucleotides corresponding to the ends of each part. PaperClip assembly can be performed by polymerase chain reaction or by cell extract-mediated recombination. Once multi-use Clips have been prepared, assembly of at least six DNA parts in any order can be accomplished with high efficiency within several hours.     

Dual signal amplification for highly sensitive electrochemical detection of uropathogens via enzyme-based catalytic target recycling

We report an ultrasensitive electrochemical approach for the detection of uropathogen sequence-specific DNA target. The sensing strategy involves a dual signal amplification process, which combines the signal enhancement by the enzymatic target recycling technique with the sensitivity improvement by the quantum dot (QD) layer-by-layer (LBL) assembled labels. The enzyme-based catalytic target DNA recycling process results in the use of each target DNA sequence for multiple times and leads to direct amplification of the analytical signal. Moreover, the LBL assembled QD labels can further enhance the sensitivity of the sensing system. The coupling of these two effective signal amplification strategies thus leads to low femtomolar (5fM) detection of the target DNA sequences. The proposed strategy also shows excellent discrimination between the target DNA and the single-base mismatch sequences. The advantageous intrinsic sequence-independent property of exonuclease III over other sequence-dependent enzymes makes our new dual signal amplification system a general sensing platform for monitoring ultralow level of various types of target DNA sequences.     

Origin of the words denoting some of the most ancient old world pulse crops and their diversity in modern European languages

This preliminary research was aimed at finding the roots in various Eurasian proto-languages directly related to pulses and giving the words denoting the same in modern European languages. Six Proto-Indo-European roots were indentified, namely arnk('')- (‘a leguminous plant’), *bhabh- (‘field bean’), * (‘a kernel of leguminous plant’, ‘pea’), ghArs- (‘a leguminous plant’), *kek- (‘pea’) and *lent- (‘lentil’). No Proto-Uralic root was attested save hypothetically *kača (‘pea’), while there were two Proto-Altaic roots, *bŭkrV (‘pea’) and * (‘lentil’). The Proto-Caucasianx root * denoted pea, while another one, *hōwł(ā) (‘bean’, ‘lentil’) and the Proto-Basque root *iłha-r (‘pea’, ‘bean’, ‘vetch’) could have a common Proto-Sino-Caucasian ancestor, *hVwłV (‘bean’) within the hypothetic Dené-Caucasian language superfamily. The Modern Maltese preserved the memory of two Proto-Semitic roots, *''adaš- (‘lentil’) and *pūl- (‘field bean’). The presented results prove that the most ancient Eurasian pulse crops were well-known and extensively cultivated by the ancestors of all modern European nations. The attested lexicological continuum witnesses the existence of a millennia-long links between the peoples of Eurasia to their mutual benefit. This research is meant to encourage interdisciplinary concerted actions between plant scientists dealing with crop evolution and biodiversity, archaeobotanists and language historians.     

Fluctuating Helical Asymmetry and Morphology of Snails (Gastropoda) in Divergent Microhabitats at 'Evolution Canyons I and II,' Israel

Background

Developmental instability of shelled gastropods is measured as deviations from a perfect equiangular (logarithmic) spiral. We studied six species of gastropods at ‘Evolution Canyons I and II’ in Carmel and the Galilee Mountains, Israel, respectively. The xeric, south-facing, ‘African’ slopes and the mesic, north-facing, ‘European’ slopes have dramatically different microclimates and plant communities. Moreover, ‘Evolution Canyon II’ receives more rainfall than ‘Evolution Canyon I.’

Methodology/Principal Findings

We examined fluctuating asymmetry, rate of whorl expansion, shell height, and number of rotations of the body suture in six species of terrestrial snails from the two ‘Evolution Canyons.’ The xeric ‘African’ slope should be more stressful to land snails than the ‘European’ slope, and ‘Evolution Canyon I’ should be more stressful than ‘Evolution Canyon II.’ Only Eopolita protensa jebusitica showed marginally significant differences in fluctuating helical asymmetry between the two slopes. Contrary to expectations, asymmetry was marginally greater on the ‘European’ slope. Shells of Levantina spiriplana caesareana at ‘Evolution Canyon I,’ were smaller and more asymmetric than those at ‘Evolution Canyon II.’ Moreover, shell height and number of rotations of the suture were greater on the north-facing slopes of both canyons.

Conclusions/Significance

Our data is consistent with a trade-off between drought resistance and thermoregulation in snails; Levantina was significantly smaller on the ‘African’ slope, for increasing surface area and thermoregulation, while Eopolita was larger on the ‘African’ slope, for reducing water evaporation. In addition, ‘Evolution Canyon I’ was more stressful than Evolution Canyon II’ for Levantina.