An RNA internal loop acts as a hinge to facilitate ribozyme folding and catalysis.

RNA molecules commonly consist of helical regions separated by internal loops, and in many cases these internal loops have been found to assume stable structures. We have examined the function and dynamics of an internal loop, J5/5a, that joins the two halves of the P4-P6 domain of the Tetrahymena self-splicing group I intron. P4-P6 RNAs with mutations in the J5/5a region showed nondenaturing gel electrophoretic mobilities and levels of Fe(II)-EDTA cleavage protection intermediate between those of wild-type RNA and a mutant incapable of folding into the native P4-P6 tertiary structure. Mutants with the least structured J5/5a loops behaved the most like wild-type P4-P6, and required smaller amounts of Mg2+ to rescue folding. The activity of reconstituted introns containing mutant P4-P6 RNAs correlated similarly with the nature of the J5/5a mutation. Our results suggest that, in solution, the P4-P6 RNA is in a two-state equilibrium between folded and unfolded states. We conclude that this internal loop mainly acts as a flexible hinge, allowing the coaxially stacked helical regions on either side of it to interact via specific tertiary contacts. To a lesser extent, the specific bases within the loop contribute to folding. Furthermore, it is crucial that the junction remain unstructured in the unfolded state. These conclusions cannot be derived from a simple examination of the P4-P6 crystal structure (Cate JH et al., 1996, Science 273:1678-1685), showing once again that structure determination must be supplemented with mutational and thermodynamic analysis to provide a complete picture of a folded macromolecule.     

Analysis of the CYT-18 Protein Binding Site at the Junction of Stacked Helices in a Group I Intron RNA by Quantitative Binding Assays andin vitroSelection

TheNeurospora crassamitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) functions in splicing group I introns by promoting the formation of the catalytically active structure of the intron RNA. Previous studies showed that CYT-18 binds with high affinity to the P4-P6 domain of the catalytic core and that there is some additional contribution to binding from the P3-P9 domain. Here, quantitative binding assays with deletion derivatives of theN. crassamitochondrial large rRNA intron showed that at least 70% of the binding energy can be accounted for by the interaction of CYT-18 with the P4-P6 domain. Within this domain, P4 and P6 are required for high affinity CYT-18 binding, while the distal elements P5 and P6a may contribute indirectly by stabilizing the correct structure of the binding site in P4 and P6. CYT-18 binds to a small RNA corresponding to the isolated P4-P6 domain, but not to a permuted version of this RNA in which P4-P6 is a continuous rather than a stacked helix. Iterativein vitroselection experiments with the isolated P4-P6 domain showed a requirement for base-pairing to maintain helices P4, P6 and P6a, but indicate that P5 is subject to fewer constraints. The most strongly conserved nucleotides in the selections were clustered around the junction of the P4-P6 stacked helix, with ten nucleotides (J3/4-2,3, P4 bp -1 and 3, and P6 bp -1 and 2) found invariant in the context of the wild-type RNA structure.In vitromutagenesis confirmed that replacement of the wild-type nucleotides at J3/4-2 and 3 or P4 bp-3 markedly decreased CYT-18 binding, reflecting either base specific contacts or indirect readout of RNA structure by the protein. Our results suggest that a major function of CYT-18 is to promote assembly of the P4-P6 domain by stabilizing the correct geometry at the junction of the P4-P6 stacked helix. The relatively large number of conserved nucleotides at the binding site suggests that the interaction of CYT-18 with group I introns is unlikely to have arisen by chance and could reflect either an evolutionary relationship between group I introns and tRNAs or interaction with a common stacked-helical structural motif that evolved separately in these RNAs.     

Self-assembly of a group I intron active site from its component tertiary structural domains.

The catalytic core of Group I self-splicing introns has been proposed to consist of two structural domains, P4-P6 and P3-P9. Each contains helical segments and conserved unpaired nucleotides, and the isolated P4-P6 domain has been shown to have substantial native tertiary structure. The proposed tertiary structure domains of the Tetrahymena intron were synthesized separately and shown to self-assemble into a catalytically active complex. Surprisingly, the concentration dependence of these reactions revealed that the domains interact with nanomolar apparent dissociation constants, even though there is no known base pairing between P4-P6 and P3-P9. This suggests that the domains interact through multiple tertiary contacts, the nature of which can now be explored in this system. For example, a circularly permuted version of the P4-P6 domain, which folds similarly to the native P4-P6 molecule, formed a stable but inactive complex. Interestingly, activity was demonstrated with the permuted molecule when nucleotides proposed to form a triple-strand interaction with P4 and P6 were restored as part of the P1-P3 substrate or as part of the P3-P9 RNA. Thus, beyond stabilization of the P4-P6 domain, the triple-strand region may facilitate correct orientation of the RNA domains or participate more directly in catalysis.     

A Tyrosyl-tRNA Synthetase Suppresses Structural Defects in the Two Major Helical Domains of the Group I Intron Catalytic Core

TheNeurospora crassamitochondrial tyrosyl-tRNA synthetase, the CYT-18 protein, functions in splicing group I introns by promoting the formation of the catalytically active structure of the intron RNA. The group I intron catalytic core is thought to consist of two extended helical domains, one formed by coaxial stacking of P5, P4, P6, and P6a (P4-P6 domain) and the other consisting of P8, P3, P7, and P9 (P3-P9 domain). To investigate how CYT-18 stabilizes the active RNA structure, we used anEscherichia coligenetic assay based on the phage T4tdintron to systematically test the ability of CYT-18 to compensate for structural defects in three key regions of the catalytic core: J3/4 and J6/7, connecting regions that form parts of the triple-helical-scaffold structure with the P4-P6 domain, and P7, a long- range base-pairing interaction that forms the guanosine-binding site and is part of the P3-P9 domain. Our results show that CYT-18 can suppress numerous mutations that disrupt the J3/4 and J6/7 nucleotide-triple interactions, as well as mutations that disrupt base-pairing in P7. CYT-18 suppressed mutations of phylogenetically conserved nucleotide residues at all positions tested, except for the universally conserved G-residue at the guanosine-binding site. Structure mapping experiments with selected mutant introns showed that the CYT-18-suppressible J3/4 mutations primarily impaired folding of the P4-P6 domain, while the J6/7 mutations impaired folding of both the P4-P6 and P3-P9 domains to various degrees. The P7 mutations impaired the formation of both P7 and P3, thereby grossly disrupting the P3-P9 domain. The finding that the P7 mutations also impaired formation of P3 provides evidence that the formation of these two long-range pairings is interdependent in thetdintron. Considered together with previous work, the nature of mutations suppressed by CYT-18 supports a model in which CYT-18 helps assemble the P4-P6 domain and then stabilizes the two major helical domains of the catalytic core in the correct relative orientation to form the intron's active site.     

Minimal catalytic domain of a group I self-splicing intron RNA

The self-splicing intron ribozymes have been regarded as primitive forms of the splicing machinery for eukaryotic pre-mRNAs. The splicing activity of group I self-splicing introns is dependent on an absolutely conserved and exceptionally densely packed core region composed of two helical domains, P3-P7 and P4-P6, that are connected rigidly via base triples. Here we show that a mutant group I intron ribozyme lacking both the P4-P6 domain and the base triples can perform the phosphoester transfer reactions required for splicing at both the 5' and 3' splice sites, demonstrating that the elements required for splicing are concentrated in the stacked helical P3-P7 domain. This finding establishes that the conserved core of the intron consists of two physically and functionally separable components, and we present a model showing the architecture of a prototype of this class of intron and the course of its molecular evolution.     

Interaction of the Neurospora crassa mitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) with the group I intron P4-P6 domain. Thermodynamic analysis and the role of metal ions

The Neurospora crassa mitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) functions in splicing group I introns by promoting the formation of the catalytically active structure of the intron's catalytic core. Previous studies suggested a model in which the protein binds first to the intron's P4-P6 domain, and then makes additional contacts with the P3-P9 domain to stabilize the two domains in the correct relative orientation to form the intron's active site. Here, we analyzed the interaction of CYT-18 with a small RNA (P4-P6 RNA) corresponding to the isolated P4-P6 domain of the N. crassa mitochondrial large subunit ribosomal RNA intron. RNA footprinting and modification-interference experiments showed that CYT-18 binds to this small RNA around the junction of the P4-P6 stacked helices on the side opposite the active-site cleft, as it does to the P4-P6 domain in the intact intron. The binding is inhibited by chemical modifications that disrupt base-pairing in P4, P6, and P6a, indicating that a partially folded structure of the P4-P6 domain is required. The temperature-dependence of binding indicates that the interaction is driven by a favorable enthalpy change, but is accompanied by an unfavorable entropy change. The latter may reflect entropically unfavorable conformational changes or decreased conformational flexibility in the complex. CYT-18 binding is inhibited at > or =125 mM KCl, indicating a strong dependence on phosphodiester-backbone interactions. On the other hand, Mg(2+) is absolutely required for CYT-18 binding, with titration experiments showing approximately 1.5 magnesium ions bound per complex. Metal ion-cleavage experiments identified a divalent cation-binding site near the boundary of P6 and J6/6a, and chemical modification showed that Mg(2+) binding induces RNA conformational changes in this region, as well as elsewhere, particularly in J4/5. Together, these findings suggest a model in which the binding of Mg(2+) near J6/6a and possibly at one additional location in the P4-P6 RNA induces formation of a specific phosphodiester-backbone geometry that is required for CYT-18 binding. The binding of CYT-18 may then establish the correct structure at the junction of the P4/P6 stacked helices for assembly of the P3-P9 domain. The interaction of CYT-18 with the P4-P6 domain appears similar to the TyrRS interaction with the D-/anticodon arm stacked helices of tRNA(Tyr).     

A chemical phylogeny of group I introns based upon interference mapping of a bacterial ribozyme

Despite its small size, the 205 nt group I intron from Azoarcus tRNA(Ile) is an exceptionally stable self-splicing RNA. This IC3 class intron retains the conserved secondary structural elements common to group I ribozymes, but lacks several peripheral helices. These features make it an ideal system to establish the conserved chemical basis of group I intron activity. We collected nucleotide analog interference mapping (NAIM) data of the Azoarcus intron using 14 analogs that modified the phosphate backbone, the ribose sugar, or the purine base functional groups. In conjunction with a complete interference set collected on the Tetrahymena group I intron (IC1 class), these data define a "chemical phylogeny" of functional groups that are important for the activity of both introns and that may be common chemical features of group I intron catalysts. The data identify the functional moieties most likely to play a conserved role as ligands for catalytic metal ions, the substrate helix, and the guanosine cofactor. These include backbone functional groups whose nucleotide identity is not conserved, and hence are difficult to identify by standard phylogenetic sequence comparisons. The data suggest that both introns utilize an equivalent set of long range tertiary interactions for 5'-splice site selection between the P1 substrate helix and its receptor in the J4/5 asymmetric bulge, as well as an equivalent set of 2'-OH groups for P1 helix docking into most of the single stranded segment J8/7. However, the Azoarcus intron appears to make an alternative set of interactions at the base of the P1 helix and at the 5'-end of the J8/7. Extensive differences were observed within the intron peripheral domains, particularly in P2 and P8 where the Azoarcus data strongly support the proposed formation of a tetraloop-tetraloop receptor interaction. This chemical phylogeny for group I intron catalysis helps to refine structural models of the RNA active site and identifies functional groups that should be carefully investigated for their role in transition state stabilization.     

Variant forms of a group I intron in nuclear small-subunit rRNA genes of the marine red alga Porphyra spiralis var. amplifolia

A group IC1 intron occurs in nuclear small-subunit (18S) ribosomal RNA (SSU rRNA) genes of the marine red alga Porphyra spiralis var. amplifolia. This intron occurs at the same position as the self- splicing group IC1 introns in nuclear SSU rDNAs of the fungus Pneumocystis carinii and in the green alga Chlorella ellipsoidea and shares sequence identity with the Pneumocystis carinii intron in domains L1, P1, P2, and L2, outside the conserved core. Three size variants, differing in amount of sequence in L1, exist and are differentially distributed in geographically distinct populations. Preliminary data suggest that the largest variant can self-splice in vitro. Short open reading frames are present but do not correspond to known genes. Repeated nucleotide motifs, reminiscent of duplicated target sites of transposons or Alu elements, are associated with the intron and with one of the variant forms of L1. Insertions are present in nuclear SSU rDNAs of several other Porphyra species and of the red alga Bangia atropurpurea; insertionless rDNA variants also occur in several Porphyra species. Our observations are most readily explained by intron mobility, although it remains unclear how transfer could have been mediated between genomes of organisms as ecologically diverse as marine red algae, freshwater green algae, and a mammalian-pathogenic fungus.      

Role of a conserved J8/7 X P4 base-triple in the Tetrahymena ribozyme

The Tetrahymena group I intron ribozyme folds into a complex three dimensional structure for performing the self-splicing reaction. Catalysis depends on its core structure comprising two helical domains, P4-P6 and P3-P7. The two domains are joined by three sets of conserved base-triple(s) and other tertiary interactions. We found that the disruption of J8/7 X P4, one such conserved base-triple, causes the catalytic ability to deteriorate without altering the folding rate. This suggests that the base-triple stabilizes the active structure of the ribozyme but plays no significant role in RNA folding. By combining the present and previous results, it can be concluded that three sets of conserved base-triples play distinct roles in the Tetrahymena ribozyme.     

Three essential and conserved regions of the group II intron are proximal to the 5'-splice site

Despite the central role of group II introns in eukaryotic gene expression and their importance as biophysical and evolutionary model systems, group II intron tertiary structure is not well understood. In order to characterize the architectural organization of intron ai5gamma, we incorporated the photoreactive nucleotides s(4)U and s(6)dG at specific locations within the intron core and monitored the formation of cross-links in folded complexes. The resulting data reveal the locations for many of the most conserved, catalytically important regions of the intron (i.e., the J2/3 linker region, the IC1(i-ii) bulge in domain 1, the bulge of D5, and the 5'-splice site), showing that all of these elements are closely colocalized. In addition, we show by nucleotide analog interference mapping (NAIM) that a specific functional group in J2/3 plays a role in first-step catalysis, which is consistent with its apparent proximity to other first-step components. These results extend our understanding of active-site architecture during the first step of group II intron self-splicing and they provide a structural basis for spliceosomal comparison.     

Monitoring intermediate folding states of the td group I intron in vivo

Group I introns consist of two major structural domains, the P4-P6 and P3-P9 domains, which assemble through interactions with peripheral extensions to fold into an active ribozyme. To assess group I intron folding in vivo, we probed the structure of td wild-type and mutant introns using dimethyl sulfate. The results suggest that the majority of the intron population is in the native state in accordance with the current structural model, which was refined to include two novel tertiary contacts. The importance of the loop E motif in the P7.1-P7.2 extension in assisting ribozyme folding was deduced from modeling and mutational analyses. Destabilization of stem P6 results in a deficiency in tertiary structure formation in both major domains, while weakening of stem P7 only interferes with folding of the P3-P9 domain. The different impact of mutations on the tertiary structure suggests that they interfere with folding at different stages. These results provide a first insight into the structure of folding intermediates and suggest a putative order of events in a hierarchical folding pathway in vivo.     

Inhibition of In Vitro Splicing of a Group I Intron of Pneumocystis carinii

Unlike its mammalian hosts, the opportunistic fungal pathogen Pneumocystis carinii harbors group I self-splicing introns in its chromosomal genes encoding rRNA. This difference between pathogen and host suggests that intron splicing is a promising target for chemotherapy. We have found that intron splicing in vitro is inhibited by the anti- Pneumocystis agent pentamidine and by a series of pentamidine analogues, as well as by some aminoglycosides, tetracycline, L-arginine and ethidium bromide. Further studies will be needed to determine if this is the mechanism of action of pentamidine against P. carinii .     

The GAAA tetraloop-receptor interaction contributes differentially to folding thermodynamics and kinetics for the P4-P6 RNA domain

Tetraloops with the generic sequence GNRA are commonly found in RNA secondary structure, and interactions of such tetraloops with "receptors" elsewhere in RNA play important roles in RNA structure and folding. However, the contributions of tetraloop-receptor interactions specifically to the kinetics of RNA tertiary folding, rather than the thermodynamics of maintaining tertiary structure once folded, have not been reported. Here we investigate the role of the key GAAA tetraloop-receptor motif in folding of the P4-P6 domain of the Tetrahymena group I intron RNA. Insertions of one or more nucleotides into the tetraloop significantly disrupt the thermodynamics of tertiary folding; single-nucleotide insertions shift the folding free energy by 2-4 kcal/mol (DeltaDeltaG(o)'). The folding kinetics of several modified P4-P6 domains were determined by stopped-flow fluorescence spectroscopy, using an internally incorporated pyrene residue as the chromophore. In contrast to the thermodynamic results, the kinetics of Mg(2+)-induced folding were barely affected by the tetraloop modifications, with a DeltaDeltaG(++) of 0.2-0.4 kcal/mol and a Phi value (ratio of the kinetic and thermodynamic contributions) of <0.1. These data indicate an early transition state for folding of P4-P6 with respect to forming the tetraloop-receptor contact, consistent with previous results for modifications elsewhere in P4-P6. We conclude that the GAAA tetraloop-receptor motif contributes little to the stabilization of the transition state for Mg(2+)-induced P4-P6 folding. Rather, the tetraloop-receptor motif acts to clamp the RNA once folding has occurred. This is the first report to correlate the kinetic and thermodynamic contributions of an important RNA tertiary motif, the GNRA tetraloop-receptor. The results are related to possible models for the Mg(2+)-induced folding of the P4-P6 RNA, including a model invoking rapid nonspecific electrostatic collapse.     

Specific metal-ion binding sites in a model of the P4-P6 triple-helical domain of a group I intron

Divalent metal ions play a crucial role in RNA structure and catalysis. Phosphorothioate substitution and manganese rescue experiments can reveal phosphate oxygens interacting specifically with magnesium ions essential for structure and/or activity. In this study, phosphorothioate interference experiments in combination with structural sensitive circular dichroism spectroscopy have been used to probe molecular interactions underlying an important RNA structural motif. We have studied a synthetic model of the P4-P6 triple-helical domain in the bacteriophage T4 nrdB group I intron, which has a core sequence analogous to the Tetrahymena ribozyme. Rp and Sp sulfur substitutions were introduced into two adjacent nucleotides positioned at the 3' end of helix P6 (U452) and in the joining region J6/7 (U453). The effects of sulfur substitution on triple helix formation in the presence of different ratios of magnesium and manganese were studied by the use of difference circular dichroism spectroscopy. The results show that the pro-Sp oxygen of U452 acts as a ligand for a structurally important magnesium ion, whereas no such effect is seen for the pro-Rp oxygen of U452. The importance of the pro-Rp and pro-Sp oxygens of U453 is less clear, because addition of manganese could not significantly restore the triple-helical interactions within the isolated substituted model systems. The interpretation is that U453 is so sensitive to structural disturbance that any change at this position hinders the proper formation of the triple helix.     

Tdd-4, a DNA transposon of Dictyostelium that encodes proteins similar to LTR retroelement integrases.

Tdd-4 is the first DNA transposon to be isolated from Dictyostelium discoideum. This element was isolated by insertion into a target plasmid. Two classes of elements were identified which include a 3.8 kb version and a 3.4 kb deleted version. Sequence analysis reveals that the 145 bp inverted terminal repeats contain the 5'-TGellipsisCA-3' conserved terminal dinucleotides found in prokaryotic transposons and integrated LTR retroelement DNA sequences. Tdd-4 open reading frames are assembled by removal of six introns. Introns 1-5 conform to the GT-AG rule, whereas intron 6 appears to be an AT-AA intron. Also, intron 6 undergoes an alternative 5' splicing reaction. The alternatively spliced region encodes 15 tandem SPXX repeats that are proposed to function as a DNA binding motif. By analogy to other transposons that encode two proteins from the same gene, the full-length Tdd-4 protein is the putative transposase and the truncated Tdd-4 protein is the putative transposition inhibitor. Protein database searches demonstrate Tdd-4 encoded proteins are unique for a DNA element by containing similarities to retroviral/retrotransposon integrases. The putative Tdd-4 transposase contains the same structural relationship as integrases by possessing an N-terminal HHCC motif, a central DDE motif and a C-terminal DNA-binding domain composed of the SPXX motif.     

Assembly of an exceptionally stable RNA tertiary interface in a group I ribozyme

Group I intron RNAs contain a core of highly conserved helices flanked by peripheral domains that stabilize the core structure. In the Tetrahymena group I ribozyme, the P4, P5, and P6 helices of the core pack tightly against a three-helix subdomain called P5abc. Chemical footprinting and the crystal structure of the Tetrahymena intron P4-P6 domain revealed that tertiary interactions between these two parts of the domain create an extensive solvent-inaccessible interface. We have examined the formation and stability of this tertiary interface by providing the P5abc segment in trans to a Tetrahymena ribozyme construct that lacks P5abc (EDeltaP5abc). Equilibrium gel shift experiments show that the affinity of the P5abc and EDeltaP5abc RNAs is exceptionally strong, with a Kd of approximately 100 pM at 10 mM MgCl2 (at 37 degrees C). Chemical and enzymatic footprinting shows that the RNAs are substantially folded prior to assembly of the complex. Solvent accessibility mapping reveals that, in the absence of P5abc, the intron RNA maintains a nativelike fold but its active-site helices are not tightly packed. Upon binding of P5abc, the catalytic core becomes more tightly packed through indirect effects of the tertiary interface formation. This two-component system facilitates quantitative examination of individual tertiary contacts that stabilize the folded intron.     

Two major tertiary folding transitions of the Tetrahymena catalytic RNA.

The L-21 Tetrahymena ribozyme, an RNA molecule with sequence-specific endoribonuclease activity derived from a self-splicing group I intron, provides a model system for studying the RNA folding problem. A 160 nucleotide, independently folding domain of tertiary structure (the P4-P6 domain) comprises about half of the ribozyme. We now apply Fe(II)-EDTA cleavage to mutants of the ribozyme to explore the role of individual structural elements in tertiary folding of the RNA at equilibrium. Deletion of peripheral elements near the 3' end of the ribozyme destabilizes a region of the catalytic core (P3-P7) without altering the folding of the P4-P6 domain. Three different mutations within the P4-P6 domain that destabilize its folding also shift the folding of the P3-P7 region of the catalytic core to higher MgCl2 concentrations. We conclude that the role of the extended P4-P6 domain and of the 3'-terminal peripheral elements is at least in part to stabilize the catalytic core. The organization of RNA into independently folding domains of tertiary structure may be common in large RNAs, including ribosomal RNAs. Furthermore, the observation of domain-domain interactions in a catalytic RNA supports the feasibility of a primitive spliceosome without any proteins.     

The Neurospora crassa CYT-18 protein C-terminal RNA-binding domain helps stabilize interdomain tertiary interactions in group I introns

The Neurospora crassa mitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) promotes the splicing of group I introns by stabilizing the catalytically active RNA structure. To accomplish this, CYT-18 recognizes conserved structural features of group I intron RNAs using regions of the N-terminal nucleotide-binding fold, intermediate alpha-helical, and C-terminal RNA-binding domains that also function in binding tRNA(Tyr). Curiously, whereas the splicing of the N. crassa mitochondrial large subunit rRNA intron is completely dependent on CYT-18's C-terminal RNA-binding domain, all other group I introns tested thus far are spliced efficiently by a truncated protein lacking this domain. To investigate the function of the C-terminal domain, we used an Escherichia coli genetic assay to isolate mutants of the Saccharomyces cerevisiae mitochondrial large subunit rRNA and phage T4 td introns that can be spliced in vivo by the wild-type CYT-18 protein, but not by the C-terminally truncated protein. Mutations that result in dependence on CYT-18's C-terminal domain include those disrupting two long-range GNRA tetraloop/receptor interactions: L2-P8, which helps position the P1 helix containing the 5'-splice site, and L9-P5, which helps establish the correct relative orientation of the P4-P6 and P3-P9 domains of the group I intron catalytic core. Our results indicate that different structural mutations in group I intron RNAs can result in dependence on different regions of CYT-18 for RNA splicing.     

Thermodynamic stability and structural features of the J4/5 loop in a Pneumocystis carinii group I intron

The J4/5 loop of the group I intron in the mouse-derived fungal pathogen Pneumocystis carinii is the docking site for the first step of the RNA-catalyzed self-splicing reaction and thus is a model of a potential drug target. This purine-rich asymmetric internal loop, 5'GGAAG/3'UAGU, is also thermodynamically more stable than other internal loops with two GU closing pairs and three nucleotides opposite two nucleotides. The results from optical melting, nuclear magnetic resonance spectroscopy, and functional group substitution experiments suggest that the GU closing pairs form and that sheared GA pairs form in the internal loop. The NMR spectra show evidence of conformational dynamics, and several GA pairings are possible. Thus, this dynamic loop presents several possible structures for potential binding of drugs that target group I self-splicing introns. The results also contribute to understanding the structural and dynamic basis for the function and thermodynamic stability of this loop.