Simple Method for Fluorescence DNA In Situ Hybridization to Squashed Chromosomes

DNA in situ hybridization (DNA ISH) is a commonly used method for mapping sequences to specific chromosome regions. This approach is particularly effective at mapping highly repetitive sequences to heterochromatic regions, where computational approaches face prohibitive challenges. Here we describe a streamlined protocol for DNA ISH that circumvents formamide washes that are standard steps in other DNA ISH protocols. Our protocol is optimized for hybridization with short single strand DNA probes that carry fluorescent dyes, which effectively mark repetitive DNA sequences within heterochromatic chromosomal regions across a number of different insect tissue types. However, applications may be extended to use with larger probes and visualization of single copy (non-repetitive) DNA sequences. We demonstrate this method by mapping several different repetitive sequences to squashed chromosomes from Drosophila melanogaster neural cells and Nasonia vitripennis spermatocytes. We show hybridization patterns for both small, commercially synthesized probes and for a larger probe for comparison. This procedure uses simple laboratory supplies and reagents, and is ideal for investigators who have little experience with performing DNA ISH.     

Single-particle tracking for DNA tether length monitoring

We describe a simple single-particle tracking approach for monitoring the length of DNA molecules in tethered particle motion experiments. In this method, the trajectory of a submicroscopic bead tethered by a DNA molecule to a glass surface is determined by videomicroscopy coupled to image analysis. The amplitude of motion of the bead is measured by the standard deviation of the distribution of successive positions of the bead in a given time interval. We were able to describe theoretically the variation of the equilibrium value of the amplitude of the bead motion with the DNA tether length for the entire applicable DNA length range (up to ~3500 bp). The sensitivity of the approach was illustrated by the evidence obtained for conformational changes introduced into a Holliday junction by the binding of the Escherichia coli RuvA protein. An advantage of this method is that the trajectory of the tethered bead, rather than its averaged motion, is measured, allowing analysis of the conformational dynamics of DNA chains at the single-molecule level.     

Single-copy gene detection using branched DNA (bDNA) in situ hybridization.

We have developed a branched DNA in situ hybridization (bDNA ISH) method for detection of human papillomavirus (HPV) DNA in whole cells. Using human cervical cancer cell lines with known copies of HPV DNA, we show that the bDNA ISH method is highly sensitive, detecting as few as one or two copies of HPV DNA per cell. By modifying sample pretreatment, viral mRNA or DNA sequences can be detected using the same set of oligonucleotide probes. In experiments performed on mixed populations of cells, the bDNA ISH method is highly specific and can distinguish cells with HPV-16 from cells with HPV-18 DNA. Furthermore, we demonstrate that the bDNA ISH method provides precise localization, yielding positive signals retained within the subcellular compartments in which the target nucleic acid sequences are localized. As an effective and convenient means for nucleic acid detection, the bDNA ISH method is applicable to the detection of cancers and infectious agents. (J Histochem Cytochem 49:603-611, 2001)     

External versus internal source of calcium during the gelation of alginate beads for DNA encapsulation

Alginate gels produced by an external or internal gelation technique were studied so as to determine the optimal bead matrix within which DNA can be immobilized for in vivo application. Alginates were characterized for guluronic/mannuronic acid (G/M) content and average molecular weight using 1H-NMR and LALLS analysis, respectively. Nonhomogeneous calcium, alginate, and DNA distributions were found within gels made by the external gelation method because of the external calcium source used. In contrast, the internal gelation method produces more uniform gels. Sodium was determined to exchange for calcium ions at a ratio of 2:1 and the levels of calcium complexation with alginate appears related to bead strength and integrity. The encapsulation yield of double-stranded DNA was over 97% and 80%, respectively, for beads formed using external and internal calcium gelation methods, regardless of the composition of alginate. Homogeneous gels formed by internal gelation absorbed half as much DNAse as compared with heterogeneous gels formed by external gelation. Testing of bead weight changes during formation, storage, and simulated gastrointestinal (GI) conditions (pH 1.2 and 7.0) showed that high alginate concentration, high G content, and homogeneous gels (internal gelation) result in the lowest bead shrinkage and alginate leakage. These characteristics appear best suited for stabilizing DNA during GI transit.     

Comparison of three DNA extraction methods for Mycobacterium bovis, Mycobacterium tuberculosis and Mycobacterium avium subsp. avium

Aims:  To compare three methods for DNA extraction from Mycobacterium bovis , Mycobacterium tuberculosis and Mycobacterium avium subsp. avium .
Methods and Results:  The DNA was extracted from mycobacterial cultures using enzymatic extraction, combined bead beating and enzymatic extraction and cetyltrimethylammonium bromide (CTAB) extraction. The yield and quality of DNA were compared by spectrophotometry, agarose gel electrophoresis, restriction endonuclease analysis and PCR. The combined bead beating and enzymatic extraction method yielded more DNA. However, that method produced some sheared DNA, visible either by agarose gel electrophoresis or by restriction endonuclease analysis. All methods were appropriate for PCR amplification of a 123 bp fragment of IS 6110 in M. bovis and M. tuberculosis , and of a 1700 bp fragment of FR300 region in M. avium avium .
Conclusions:  Combined bead beating and enzymatic extraction method was the most efficient and easy method for extracting DNA from bacteria of the M. tuberculosis complex.
Significance and Impact of the Study:  The results reveal important differences among the DNA extraction methods for mycobacteria, which are relevant for the success of further downstream molecular analysis.     

Characterization of insertions affecting the expression of the bacterio-opsin gene in Halobacterium halobium.

We have determined the sequence of the inverted repeats and duplicated target DNA of the halobacterial insertion elements ISH2 (520 bp), ISH23 (900 bp) and ISH24 (3000 bp) associated with bacterio-opsin (bop) mutants. ISH2 has a perfect 19 bp inverted repeat (3,5), while both ISH23 and ISH24 have imperfect inverted repeats of 29 bp and 14 bp respectively. ISH23 was shown to be highly homologous to ISH50 (6). Variable lengths of duplicated target DNA are found when ISH2 and ISH23 (ISH50) transpose into different sites. A 550 bp DNA insert ("ISH25") reverts the Bop mutation caused by ISH24. "ISH25" lacks typical structural features of a transposable element. "ISH25" and ISH24 are found adjacent to each other upstream of the bop gene. An identical arrangement of "ISH25" and ISH24 is found in the cccDNA of H. halobium NRC817. Comparative sequence analysis of both areas suggests that the translocation of "ISH25" to the bop gene region occurred by a recombination event.     

Multicolour preparations for in situ hybridization using precipitating enzyme cytochemistry in combination with reflection contrast microscopy

We have further developed a method for the detection of different enzyme cytochemical reaction products by means of reflection contrast microscopy (RCM). By embedding these enzyme precipitates in a protein matrix, we were able to prevent the reaction products from dissolving in immersion oil, which is required for RCM analysis. The applicability of the RCM procedure is, therefore, extended to a range of cytochemical enzyme precipitation methods, which normally result in oil soluble reaction products. To test their usefulness, these enzyme precipitates have been used in single- as well as double-label in situ hybridization (ISH) procedures to visualize a number of DNA target sequences by several different reflection colours, i.e. white, yellow and red. Three repetitive DNA probes for the (sub)centromeric regions of chromosomes 1, 7 and 17, as well as a repetitive DNA probe for the telomeric region of chromosome 1, and two cosmid DNA probes (40 kb each) for both arms of chromosome 11 could be detected with high efficiency in both interphase and metaphase preparations. Moreover the enzyme precipitates were shown to be stable upon exposure to excitation light or upon storage. It may be concluded that these findings render RCM a sensitive method for the visualization of multiple targets in biological specimens.Presented in part at the 9th International Congress of Histochemistry and Cytochemistry, 30 August – 5 September 1992, Maastricht, The Netherlands (Speel et al. 1992c)     

三种粪便总DNA提取方法的比较

目的比较不同粪便总DNA提取方法对肠道菌群多样性研究的影响。方法采用Bead beating法、化学裂解法和QIAamp DNA Stool Mini Kit提取同一份人粪便样品的总DNA,对比3种方法的DNA得率和16S rRNA基因V3区的变性梯度凝胶电泳（DGGE）图谱。结果Bead beating法的DNA得率约是其他2种方法的2倍;3种方法得到的DGGE图谱的Dice相似性为60％～70％,2条优势条带只出现在Bead beating法图谱中。在2～5min的Bead beating法击打时间里,DNA得率随击打时间的延长有一定的增加,但DGGE图谱无显著变化。结论不同的DNA提取方法会影响菌群的多样性分析。比较其他2种方法,Bead beating的裂解效率更高,能够检测到更多种类的细菌,更合适肠道菌群组成的分子研究。     

Detection of viral infection and gene expression in clinical tissue specimens using branched DNA (bDNA) in situ hybridization.

In situ hybridization (ISH) methods for detection of nucleic acid sequences have proved especially powerful for revealing genetic markers and gene expression in a morphological context. Although target and signal amplification technologies have enabled researchers to detect relatively low-abundance molecules in cell extracts, the sensitive detection of nucleic acid sequences in tissue specimens has proved more challenging. We recently reported the development of a branched DNA (bDNA) ISH method for detection of DNA and mRNA in whole cells. Based on bDNA signal amplification technology, bDNA ISH is highly sensitive and can detect one or two copies of DNA per cell. In this study we evaluated bDNA ISH for detection of nucleic acid sequences in tissue specimens. Using normal and human papillomavirus (HPV)-infected cervical biopsy specimens, we explored the cell type-specific distribution of HPV DNA and mRNA by bDNA ISH. We found that bDNA ISH allowed rapid, sensitive detection of nucleic acids with high specificity while preserving tissue morphology. As an adjunct to conventional histopathology, bDNA ISH may improve diagnostic accuracy and prognosis for viral and neoplastic diseases.     

Sequential chromosome banding and in situ hybridization analysis.

Different combinations of chromosome N- or C-banding with in situ hybridization (ISH) or genomic in situ hybridization (GISH) were sequentially performed on metaphase chromosomes of wheat. A modified N-banding-ISH/GISH sequential procedure gave best results. Similarly, a modified C-banding - ISH/GISH procedure also gave satisfactory results. The variation of the hot acid treatment in the standard chromosome N- or C-banding procedures was the major factor affecting the resolution of the subsequent ISH and GISH. By the sequential chromosome banding - ISH/GISH analysis, multicopy DNA sequences and the breakpoints of wheat-alien translocations were directly allocated to specific chromosomes of wheat. The sequential chromosome banding- ISH/GISH technique should be widely applicable in genome mapping, especially in cytogenetic and molecular mapping of heterochromatic and euchromatic regions of plant and animal chromosomes.     

Quantification of inter- and intra-nuclear variation of fluorescence in situ hybridization signals.

This study aims at the quantification of specific DNA sequences by using fluorescence in situ hybridization (ISH) and digital imaging microscopy. The cytochemical and cytometric aspects of a quantitative ISH procedure were investigated, using human peripheral blood lymphocyte interphase nuclei and probes detecting high copy number target sequences as a model system. These chromosome-specific probes were labeled with biotin, digoxigenin, or fluorescein. Quantification of the fluorescence ISH signals was performed using an epifluorescence microscope equipped with a multi-wavelength illuminator, and a cooled charge coupled device (CCD) camera. Specific image analysis programs were developed for the segmentation and analysis of the images provided by ISH. The fluorescence intensity distributions of the ISH spots showed large internuclear variation (CVs up to 65%) for the probes used. The variation in intensity was found to be independent of the probe, the type of labeling, and the type of immunocytochemical detection used. Variation in intensity was not caused primarily by the immunocytochemical detection method, since directly fluorescein-labeled probes showed similar internuclear variation. Furthermore, it was found that different white blood cell types, which harbor different degrees of compactness of the nuclear chromatin, showed the same variation. The intra-nuclear variation in intensity of the ISH spots on the two chromosome homologs within one nucleus was significantly smaller (approximately 20%) than the inter-nuclear variation, probably due to more constant local hybridization conditions. Due to the relatively small intranuclear variation, copy number polymorphisms of the satellite DNA sequence on chromosome 1 could readily be quantified.(ABSTRACT TRUNCATED AT 250 WORDS)     

Evaluation of different methods for the extraction of DNA from fungal conidia by quantitative competitive PCR analysis.

Five different DNA extraction methods were evaluated for their effectiveness in recovering PCR templates from the conidia of a series of fungal species often encountered in indoor air. The test organisms were Aspergillus versicolor, Penicillium chrysogenum, Stachybotrys chartarum, Cladosporium herbarum and Alternaria alternata. The extraction methods differed in their use of different cell lysis procedures. These included grinding in liquid nitrogen, grinding at ambient temperature, sonication, glass bead milling and freeze-thawing. DNA purification and recovery from the lysates were performed using a commercially available system based on the selective binding of nucleic acids to glass milk. A simple quantitative competitive polymerase chain reaction (QC-PCR) assay was developed for use in determining copy numbers of the internal transcribed spacer (ITS) regions of the ribosomal RNA operon (rDNA) in the total DNA extracts. These quantitative analyses demonstrated that the method using glass bead milling was most effective in recovering PCR templates from each of the different types of conidia both in terms of absolute copy numbers recovered and also in terms of lowest extract to extract variability. Calculations of average template copy yield per conidium in this study indicate that the bead milling method is sufficient to support the detection of less than ten conidia of each of the different organisms in a PCR assay.     

PCR-derived ssDNA probes for fluorescent in situ hybridization to HIV-1 RNA.

We developed a simple and rapid technique to synthesize single-stranded DNA (ssDNA) probes for fluorescent in situ hybridization (ISH) to human immunodeficiency virus 1 (HIV-1) RNA. The target HIV-1 regions were amplified by the polymerase chain reaction (PCR) and were simultaneously labeled with dUTP. This product served as template for an optimized asymmetric PCR (one-primer PCR) that incorporated digoxigenin (dig)-labeled dUTP. The input DNA was subsequently digested by uracil DNA glycosylase, leaving intact, single-stranded, digoxigenin-labeled DNA probe. A cocktail of ssDNA probes representing 55% of the HIV-1 genome was hybridized to HIV-1-infected 8E5 T-cells and uninfected H9 T-cells. For comparison, parallel hybridizations were done with a plasmid-derived RNA probe mix covering 85% of the genome and a PCR-derived RNA probe mix covering 63% of the genome. All three probe types produced bright signals, but the best signal-to-noise ratios and the highest sensitivities were obtained with the ssDNA probe. In addition, the ssDNA probe syntheses generated large amounts of probe (0.5 to 1 microg ssDNA probe per synthesis) and were easier to perform than the RNA probe syntheses. These results suggest that ssDNA probes may be preferable to RNA probes for fluorescent ISH. (J Histochem Cytochem 48:285-293, 2000)     

Quantitative aspects of anin situ hybridization procedure for detecting mRNAs in cells using 96-well microplates

The universal quantitation of the DNA hybridization reaction has been a goal sought by many researchers. Part of this search has been the need to develop a rapid, sensitive, easy-to-perform, and quantitative method to measure the abundance of specific mRNAs directly within cells. Conventionally mRNA detection can be done by advanced quantitativein situ hybridization (ISH) using either image analysis or fluorescencein situ hybridization (FISH), or indirectly by extraction of mRNA from cells or tissue and using Northern blot or quantitative polymerase chain reaction (PCR). We examined the quantitative nature of probe binding to intracellular mRNA in a sensitive and easy-to-use nonisotopic method of ISH previously developed in our laboratories. The method is applicable to isolated primary cells or cells in culture. The procedural details are very simple, with cells being centrifuged into 96-well microplates, fixed with formalin, and pretreated with Triton X-100 and Nonidet P-40 before photobiotin-labeled cDNA probes are applied. Biotin from the hybridization of probe to target is detected using multiple applications of streptavidin and biotinylated alkaline phosphatase and visualized by thep-nitrophenyl phosphate conversion method. The quantitative parameters of the ISH procedure were determined by measuring the levels of expression of erythropoietin (EPO) mRNA and its translated protein in transfected COS-7 cells. There is a log-linear relationship between the levels of signal obtained in the ISH reaction in 96-well microplates and the EPO protein levels measured by enzyme-linked immunosorbent assay (ELISA). This demonstrated relationship is important in the standardization and use of these procedures to measure quantitatively mRNAs within cells.     

Effect of bone decalcification procedures on DNA in situ hybridization and comparative genomic hybridization. EDTA is highly preferable to a routinely used acid decalcifier.

Decalcification is routinely performed for histological studies of bone-containing tissue. Although DNA in situ hybridization (ISH) and comparative genomic hybridization (CGH) have been successfully employed on archival material, little has been reported on the use of these techniques on archival decalcified bony material. In this study we compared the effects of two commonly used decalcifiers, i.e. , one proprietary, acid-based agent (RDO) and one chelating agent (EDTA), in relation to subsequent DNA ISH and CGH to bony tissues (two normal vertebrae, six prostate tumor bone metastases with one sample decalcified by both EDTA and RDO). We found that RDO-decalcified tissue was not suited for DNA ISH in tissue sections with centromere-specific probes, whereas we were able to adequately determine the chromosomal status of EDTA-decalcified material of both control and tumor material. Gel electrophoresis revealed that no DNA could be successfully retrieved from RDO-treated material. Moreover, in contrast to RDO-decalcified tumor material, we detected several chromosomal imbalances in the EDTA-decalcified tumor tissue by CGH analysis. Furthermore, it was possible to determine the DNA ploidy status of EDTA- but not of RDO-decalcified material by DNA flow cytometry. Decalcification of bony samples by EDTA is highly recommended for application in DNA ISH and CGH techniques.     

Nonisotopic in situ hybridization and plant genome mapping: the first 10 years.

Nonisotopic in situ hybridization (ISH) was introduced in plants in 1985. Since then the technique has been widely used in various areas of plant genome mapping. ISH has become a routine method for physical mapping of repetitive DNA sequences and multicopy gene families. ISH patterns on somatic metaphase chromosomes using tandemly repeated sequences provide excellent physical markers for chromosome identification. Detection of low or single copy sequences were also reported. Genomic in situ hybridization (GISH) was successfully used to analyze the chromosome structure and evolution of allopolyploid species. GISH also provides a powerful technique for monitoring chromatin introgession during interspecific hybridization. A sequential chromosome banding and ISH technique was developed. The sequential technique is very useful for more precise and efficient mapping as well as cytogenetic determination of genomic affinities of individual chromosomes in allopolyploid species. A critical review is made on the present resolution of the ISH technique and the future outlook of ISH research is discussed.     

Reducing the risk of false discovery enabling identification of biologically significant genome-wide methylation status using the HumanMethylation450 array

Background

The Illumina HumanMethylation450 BeadChip (HM450K) measures the DNA methylation of 485,512 CpGs in the human genome. The technology relies on hybridization of genomic fragments to probes on the chip. However, certain genomic factors may compromise the ability to measure methylation using the array such as single nucleotide polymorphisms (SNPs), small insertions and deletions (INDELs), repetitive DNA, and regions with reduced genomic complexity. Currently, there is no clear method or pipeline for determining which of the probes on the HM450K bead array should be retained for subsequent analysis in light of these issues.

Results

We comprehensively assessed the effects of SNPs, INDELs, repeats and bisulfite induced reduced genomic complexity by comparing HM450K bead array results with whole genome bisulfite sequencing. We determined which CpG probes provided accurate or noisy signals. From this, we derived a set of high-quality probes that provide unadulterated measurements of DNA methylation.

Conclusions

Our method significantly reduces the risk of false discoveries when using the HM450K bead array, while maximising the power of the array to detect methylation status genome-wide. Additionally, we demonstrate the utility of our method through extraction of biologically relevant epigenetic changes in prostate cancer.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-51) contains supplementary material, which is available to authorized users.     

Insertion elements and deletion formation in a halophilic archaebacterium.

Deletion events that occur spontaneously in 36-kilobase-pair (kbp) plasmid pHH4 from the archaebacterium Halobacterium halobium were investigated. Four different deletion derivatives with sizes ranging from 5.7 to 17 kbp were isolated. Three of these deletion variants derived from pHH4 (pHH6 [17 kbp], pHH7 [16 kbp], and pHH8 [6.3 kbp]), whereas the 5.7-kbp plasmid pHH9 derived from pHH6. Strains containing pHH6, pHH7, or pHH9 each lacked the parental plasmid pHH4, while pHH8 occurred at a 1:1 ratio together with pHH4. Common to all of these plasmids was the 5.7-kbp region of pHH9 DNA. The regions containing the fusion site in the deletion derivatives were investigated and compared with the corresponding area of the parental plasmid. Each deletion occurred exactly at the terminus of an insertion element. In pHH6 and pHH7, a halobacterial insertion element (ISH2) was located at the deletion site. The DNA fused to ISH2 displayed a 7-base-pair (bp) (pHH7) or 10-bp (pHH6) sequence homology to the inverted repeat of ISH2. In the two smaller plasmids, pHH8 and pHH9, an ISH27 element was located at the deletion site. Most likely, all of these smaller plasmids resulted from an intramolecular transposition event. The ISH27 insertion sequence contains a 16-bp terminal inverted repeat and duplicates 5 bp of target DNA during the transposition with the specificity 5'ANNNT3'. Four ISH27 copies were analyzed, and two ISH27 element types were identified that have approximately 85% sequence similarity. The ISH27 insertion elements constitute a family which is related to the ISH51 family characterized for H. volcanii, another halophilic archaebacterium.     

Histone H3 messenger RNA in situ hybridization for identifying proliferating cells in formalin-fixed rat gastric mucosa

To devise a more sensitive method for identifying proliferative cells in routinely formalin-fixed, paraffin-embedded tissues, we applied an in situ hybridization (ISH) technique for the detection of histone H3 mRNA in rat gastric mucosa and amplified the signal by a silver intensification method. ISH was performed using a Fluorescein-labelled, single-stranded DNA probe for the human histone H3 gene. To determine the optimal conditions for detecting H3 mRNA in rat gastric mucosa, we tested the effect of changing conditions, such as fixation time and digestion time, by a proteinase before hybridization. Next, the proliferation indices obtained using H3 ISH were compared with those obtained using bromodeoxyuridine (BrdU) immunohistochemistry. In normal rat gastric mucosa, H3 ISH- and BrdU-positive cells were confined to the neck region of both fundic and pyloric mucosa. The two labelling indices were almost the same. In all the serial sections studied, H3 ISH-positive cells were almost always BrdU-positive too. Taken together, these results indicate that the H3 ISH technique is useful for the evaluation of proliferative activity in gastric epithelial cells by virtue of its detection of S-phase cells This revised version was published online in November 2006 with corrections to the Cover Date.