Uptake of fluorescence-labeled dextrans by 10T 1/2 fibroblasts following permeation by rectangular and exponential-decay electric field pulses

The uptake of fluorescence-labeled dextrans by adherent 10T 1/2 murine fibroblasts following electric field pulse application was used as a criterion for the efficiency of electropermeation. The cells in monolayers were permeated by immersing a coaxial electrode in culture dishes. The percentage of cells which exhibited fluorescence uptake following electric field pulse application was measured at independently varying pulse field strength and pulse length. Dextrans with molecular weights equal to or higher than 41,000 dalton require higher field strength or longer pulse time to penetrate the cells. There is no detectable advantage of using a rectangular pulse against using an exponential decay pulse of similar power. The uptake was proportional to the product of the pulse amplitude and duration over the experimental range of 40-950 microseconds and 0.1-14.5 kV/cm. Cell survival decreases at the upper end of this range. The result provides a direct comparison of electric parameters which so far have not been standardized with regard to cell electropermeation.     

Electroporation-mediated transformation of lysostaphin-treated Clostridium perfringens

A reliable and efficient method has been developed for the electroporation-mediated transformation of Clostridium perfringens with plasmid DNA. Transformation of vegetative cells of C. perfringens strain 13 with the 7.9-kb Escherichia coli-C. perfringens shuttle plasmid pHR 106 required pretreatment with lysostaphin (2 to 20 micrograms/ml) for 1 h at 37 degrees C. Cells harvested early in the logarithmic stage of growth were transformed more efficiently than cells at other growth phases. The transformation frequency increased with the DNA concentration, to a saturating level at 5 to 10 micrograms DNA/ml. The transformation frequency was proportional to the field strength and time constant of the electroporation pulse; however, the field strength was a far more important parameter. A cell density between 1 x 10(8) and 5 x 10(8) cells/ml proved to be optimal for transformation. The procedure was capable of generating up to 3.0 x 10(5) transformants per micrograms DNA. The potential value of the method for the cloning of C. perfringens genes was demonstrated by the cloning of the clostridial tetracycline-resistance determinant, tetP, from the E. coli recombinant plasmid pJIR71, into C. perfringens strain 13.     

Determination of physical membrane properties of plant cell protoplasts via the electrofusion technique: prediction of optimal fusion yields and protoplast viability

By variation of physical parameters (field strength, pulse duration) which result in electrofusion and electroporation, properties of the plasma membrane of different types of plant cell protoplasts were analyzed. The lower threshold for that field pulse intensity at which membrane breakdown occurred (recorded as fusion event) depended on pulse duration, protoplast size, and protoplast type (tobacco, oat; vacuolated, evacuolated). This fusion characteristic of plant protoplasts can also be taken as a measure of the charging process of the membrane and allows thus a non-invasive determination of the time constant and the specific membrane capacitance. Although the fusion yield was comparable at pulse duration/field strength couples of, e.g., 10 s/1.5 kV*cm^–1 and 200 s/0.5 kV*cm^–1, hybrid viability was not. Rates of cell wall regeneration and cell division of tobacco mesophyll protoplasts were not affected but may have been increased at short pulse duration/high field strength. Plating efficiency, in contrast, was significantly decreased with longer pulse duration at low field strengths.     

Construction of a hybrid plasmid capable of replication in Amycolatopsis mediterranei.

A new plasmid, pA387, has been isolated from "Amycolatopsis sp." (DSM 43387). This plasmid could be isolated from liquid culture as well as mycelium from agar plates by a modified procedure. Plasmid pA387 is about 29.6 kb and can be cured at low frequency by protoplasting and ethidium bromide and heat treatment. Hybridization experiments showed that this plasmid is present in free form and does not integrate into the chromosome. A hybrid plasmid was constructed by cloning a 5.1-kb fragment of pA387 into the Escherichia coli vector pDM10. This hybrid plasmid, termed pRL1, could be transformed into Amycolatopsis mediterranei and A. orientalis by electroporation. A transformation frequency of 2.2 x 10(3) transformants per micrograms of DNA at 12.5 kV/cm and a pulse duration of 10.8 ms was obtained in A. mediterranei, whereas 1.1 x 10(5) transformants per microgram of DNA were obtained at a field strength of 7.5 kV/cm and a pulse duration of 7.6 ms in A. orientalis. Plasmid pRL1 is the first hybrid plasmid which could be used successfully for the transformation of A. mediterranei. The plasmid has a rather high copy number, is genetically stable, and can be easily reisolated from A. mediterranei. Plasmid pRL1 will be useful for further construction of a shuttle vector for E. coli and A. mediterranei and becomes the basis for the development of gene cloning techniques in Amycolatopsis spp.     

Construction of a hybrid plasmid capable of replication in Amycolatopsis mediterranei

A new plasmid, pA387, has been isolated from "Amycolatopsis sp." (DSM 43387). This plasmid could be isolated from liquid culture as well as mycelium from agar plates by a modified procedure. Plasmid pA387 is about 29.6 kb and can be cured at low frequency by protoplasting and ethidium bromide and heat treatment. Hybridization experiments showed that this plasmid is present in free form and does not integrate into the chromosome. A hybrid plasmid was constructed by cloning a 5.1-kb fragment of pA387 into the Escherichia coli vector pDM10. This hybrid plasmid, termed pRL1, could be transformed into Amycolatopsis mediterranei and A. orientalis by electroporation. A transformation frequency of 2.2 x 10(3) transformants per micrograms of DNA at 12.5 kV/cm and a pulse duration of 10.8 ms was obtained in A. mediterranei, whereas 1.1 x 10(5) transformants per microgram of DNA were obtained at a field strength of 7.5 kV/cm and a pulse duration of 7.6 ms in A. orientalis. Plasmid pRL1 is the first hybrid plasmid which could be used successfully for the transformation of A. mediterranei. The plasmid has a rather high copy number, is genetically stable, and can be easily reisolated from A. mediterranei. Plasmid pRL1 will be useful for further construction of a shuttle vector for E. coli and A. mediterranei and becomes the basis for the development of gene cloning techniques in Amycolatopsis spp.     

Transformation of a Methylotrophic Bacterium, Methylobacterium extorquens, with a Broad-Host-Range Plasmid by Electroporation

An efficient method for the transformation of the methylotrophic bacterium Methylobacterium extorquens NR-2 with a broad-host-range plasmid, pLA2917, by electroporation was examined. Transformants of M. extorquens NR-2 expressing resistance to kanamycin were obtained after electric pulse. These transformants were found to harbor a single plasmid which was electrophoretically identical and homologous to pLA2917 obtained from Escherichia coli. Several factors which determined the transformation efficiency were optimized, resulting in a transformation efficiency of up to 8 × 10³ transformants per μg of plasmid DNA by 10 pulses at a field strength of 10 kV/cm and a pulse duration of 300 μs.     

Genetic transformation of intact Lactococcus lactis subsp. lactis by high-voltage electroporation

To apply recombinant DNA techniques for genetic manipulation of the industrially important lactococci, an efficient and reliable high-frequency transformation system must be available. High-voltage electric pulses have been demonstrated to enhance uptake of DNA into protoplasts and intact cells of numerous gram-negative and gram-positive microorganisms. The objective of this study was to develop a system for electroporating intact cells of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) with a commercially available electroporation unit (BTX Transfector 100; BTX, Inc., San Diego, Calif.). Parameters which influenced the efficiency of transformation included growth phase and final concentration of cells, ionic strength of the suspending medium, concentration of plasmid DNA, and the amplitude and duration of the pulse. Washed suspensions of intact cells suspended in deionized distilled water were subjected to one high-voltage electric pulse varying in voltage (300 to 900 V corresponding to field strengths of 5 to 17 kV/cm) and duration (100 microseconds to 1 s). Transformation efficiencies of 10(3) transformants per microgram of DNA were obtained when dense suspensions (final concentration, 5 x 10(10) CFU/ml) of stationary-phase cells were subjected to one pulse with a peak voltage of 900 V (field strength, 17 kV/cm) and a pulse duration of 5 ms in the presence of plasmid DNA. Dilution of porated cells in broth medium followed by an expression period of 2 h at 30 degrees C was beneficial in enhancing transformation efficiencies. Plasmids ranging in size from 9.8 to 30.0 kilobase pairs could be transformed by this procedure.     

Genetic transformation of intact Lactococcus lactis subsp. lactis by high-voltage electroporation.

To apply recombinant DNA techniques for genetic manipulation of the industrially important lactococci, an efficient and reliable high-frequency transformation system must be available. High-voltage electric pulses have been demonstrated to enhance uptake of DNA into protoplasts and intact cells of numerous gram-negative and gram-positive microorganisms. The objective of this study was to develop a system for electroporating intact cells of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) with a commercially available electroporation unit (BTX Transfector 100; BTX, Inc., San Diego, Calif.). Parameters which influenced the efficiency of transformation included growth phase and final concentration of cells, ionic strength of the suspending medium, concentration of plasmid DNA, and the amplitude and duration of the pulse. Washed suspensions of intact cells suspended in deionized distilled water were subjected to one high-voltage electric pulse varying in voltage (300 to 900 V corresponding to field strengths of 5 to 17 kV/cm) and duration (100 microseconds to 1 s). Transformation efficiencies of 10(3) transformants per microgram of DNA were obtained when dense suspensions (final concentration, 5 x 10(10) CFU/ml) of stationary-phase cells were subjected to one pulse with a peak voltage of 900 V (field strength, 17 kV/cm) and a pulse duration of 5 ms in the presence of plasmid DNA. Dilution of porated cells in broth medium followed by an expression period of 2 h at 30 degrees C was beneficial in enhancing transformation efficiencies. Plasmids ranging in size from 9.8 to 30.0 kilobase pairs could be transformed by this procedure.     

Electroacoustic fusion of millilitre volumes of cells in physiological medium

A technique is described in which erythrocytes suspended in 1.1 ml of 145 mM NaCl, have been fused by electrofusion. The cells in suspension were brought into close contact by setting up a 3 MHz ultrasonic standing wave in a cylindrical cell container. The aluminium foil base of the container served both to transmit ultrasound and as an electrode for electrofusion. The electric pulse was generated by a capacitor discharge system. The electric field strength required to fuse cells increased as the ionic strength of the cell suspending phase increased. Cells in physiological saline fused at an electric field strength of 7.3 kV/cm with a 50 microseconds pulse.     

Duration and frequency of a high temperature pulse affect survival of emergence-ready Megachile rotundata (Hymenoptera: Megachilidae) during low-temperature incubation

Synchronizing Megachile rotundata (F.) nesting activity with alfalfa bloom is essential for ensuring optimal pollination for alfalfa seed production. This is achieved by timing the initiation of spring bee incubation so that adults will emerge -2 wk before peak bloom. If weather conditions change so as to delay the bloom, bee managers will commonly expose the developing bees to a period of low-temperature incubation to slow their development. We have previously demonstrated survival during low-temperature incubation can be significantly increased by using a fluctuating thermal regime (FTR) where the bees receive a daily pulse at 20 degrees C. A FTR incubation protocol is composed of a number of different components, such as the base and pulse temperatures, and the duration and frequency of the pulse. In this investigation, the effect of the duration of the pulse (5-120 min) and the frequency of a pulse (twice daily to weekly) on the survival of developing M. rotundata was examined. A pulse as short as 5 min at 20 degrees C increased survival of the developing bees as compared with the constant 6 degrees C controls. Increasing the pulse duration induced a further increase in tolerance to 6 degrees C. As with the pulse duration, increasing the pulse frequency from once weekly to twice daily had a significant effect on improving the bees tolerance to low-temperature incubation. This investigation further strengthens the argument that a FTR protocol is superior to using a constant low-temperature exposure for interrupting the spring incubation of M. rotundata.     

潮霉素B抗性为选择标记的整合型表达载体的构建及在米根霉中的遗传转化

为了建立适合米根霉的遗传转化体系,应用重叠延伸PCR的方法构建了以潮霉素B抗性为选择标记的单交换整合型表达载体p BS-hygro-ldh A;分别采用PEG/Ca Cl2介导的原生质体转化、原生质体电转化及萌发孢子电转化的方法将表达载体p BS-hygro-ldh A转化入米根霉AS 3.819菌株中,并研究了菌丝酶解时间、孢子萌发时间以及电转化电场强度对于转化效率的影响;通过荧光定量PCR(q PCR)对米根霉转化子基因组中质粒整合拷贝数进行了检测,并研究了其对米根霉转化子抗性稳定性的影响。实验结果表明成功获得整合了表达载体p BS-hygro-ldh A的米根霉转化子。菌丝酶解140 min产生的原生质体其再生率和转化率最高,原生质体电转化最佳电场强度为13 k V/cm,孢子萌发2.5 h转化率最高,萌发孢子电转化最佳电场强度为14 k V/cm。萌发孢子电转化方法转化率要高于原生质体转化的方法。荧光定量PCR检测结果表明,在一定范围内,高质粒整合拷贝数的米根霉转化子比较稳定。研究建立了用于工业米根霉菌株的遗传转化体系,为米根霉代谢调控研究以及菌种改造工作提供了基础与支持。     

Electrofusion parameters for mouse two-cell embryos

We studied electrofusion of mouse two-cell embryos in order to define parameters which would result in a high yield of fused embryos. Various cell alignment times (from <10 to >60 s) and alternating current percentages (2 to 100%) were examined. The fusion parameters tested were the number of fusion pulses (1-9), pulse length (30-90 mus) and pulse strength (0.50-1.79 kV/cm). Furthermore different combinations of these three parameters were tested. In addition the influence of several embryo culture media on the fusion rates was examined. The results show that the fusion rate of the embryos increases with shorter alignment and higher percentages of the alternating current. The highest fusion rate (95%) was obtained by use of one pulse with a duration of 70 mus and a field strength of 0.60-0.79 kV/cm. The survival rate of the embryos was best if Whitten Medium was used before and after the fusion pulses. The fusion of two-cell stages results in tetraploid embryos which can serve as models for studies in polyploid cells.     

Electrical Energy Changes Conductivity and Determines Optimal Electrotransformation Frequency in Gram-Negative Bacteria

In many bacterial electrotransformation protocols, pulse time is related to the time constant for a capacitor discharging across a sample of fixed resistance. Using an electroporator which controls pulse time independently of the capacitor time constant, we found that the resistance of bacterial suspensions fluctuates widely during capacitor discharge. With three gram-negative species of bacteria, electrotransformation frequency and survival could be more simply related to the electrical energy delivered in each pulse than to component parameters, such as initial field strength, capacitance, and pulse time. In each case, the number of transformants per survivor increased exponentially and leveled off when more than 0.5 to 1.0 J of electrical energy was delivered. An inverse log-linear relationship between survival and energy delivered was also observed for all three species.     

Picosecond Pulse Electrical Field Suppressing Spike Firing in Hippocampal CA1 in Rat In Vivo

Picosecond pulse electrical fields (psPEFs), due to their high temporal-resolution accuracy and localization, were viewed as a potential targeted and noninvasive method for neuromodulation. However, few studies have reported psPEFs regulating neuronal activity in vivo. In this paper, a preliminary study on psPEFs regulating action potentials in hippocampus CA1 of rats in vivo was carried out. By analyzing the neuronal spike firing rate in hippocampus CA1 pre- and post-psPEF stimulation, effects of frequency, duration, and dosimetry of psPEFs were studied. The psPEF used in this study had a pulse width of 500 ps and a field strength of 1 kV/mm, established by 1 kV picosecond voltage pulses. Results showed that the psPEF suppressed spike firing in hippocampal CA1 neurons. The suppression effect was found to be significant except for 10 s, 10 Hz. For short-duration stimulation (10 s), the inhibition rate of spike firing increased with frequency. At longer stimulation durations (1 and 2 min), the inhibition rate increased and decreased alternately as the frequency increased. Despite this, the inhibition rate at high frequencies (5 and 10 kHz) was significantly larger than that at 10 and 100 Hz. A cumulative effect of psPEF on spike firing inhibition was found at low frequencies (10 and 100 Hz), which was saturated when frequency reached 500 Hz or higher. This paper conducts a study on psPEF regulating spike firing in hippocampal CA1 in vivo for the first time and guides subsequent study on psPEF achieving noninvasive neuromodulation. © 2020 Bioelectromagnetics Society     

Facilitated electrofusion of vacuolated x evacuolated oat mesophyll protoplasts in hypo-osmolar media after alignment with an alternating field of modulated strength

Electrofusion of evacuolated and vacuolated oat leaf protoplasts is difficult because of the different size and density of these cells which results in separation of the two fusion partners during dielectrophoresis. The fusion yield of this cell system was considerably enhanced by electrofusion in hypo-osmolar media containing 0.4 M mannitol, 0.1 mM calcium acetate and 0.1% bovine serum albumin. This increase in yield was only achieved if the dielectrophoretically induced membrane contact between the two fusion partners was enhanced by an initial short 'burst' of higher field strength (500 V/cm, peak to peak, for 5 s followed by a reduction of to 90 V/cm, peak to peak, for 20 s, frequency 1 MHz). Due to the high field strength of the alternating field at the beginning of cell chain formation separation of fusion partners of different size and density was mainly avoided. Simultaneously, the short duration of this high field 'burst' avoided the generation of lethal effects in the cell membranes. The subsequent low field strength of the alternating field was sufficient to keep the aligned cells in position. Optimum fusion was induced by a single square pulse of 750 V/cm and 30 musec duration. The time required for rounding up of the heterologous fusion products decreased with decreasing osmolarity. Fusion resulted in a 5.7 +/- 1.2% yield of heterologous fusion products (compared to 0.7% using the conventional electrofusion protocol) as determined by flow cytometric assay. About 50% of the vacuolated oat protoplasts and 20-50% of the heterologous fusion products regenerated their cell walls within 5 days after hypo-osmolar treatment, but no cell divisions could be observed. Evacuolated oat protoplasts died after 2-3 days in culture without any detectable cell wall regeneration.     

Time courses of mammalian cell electropermeabilization observed by millisecond imaging of membrane property changes during the pulse

Time courses of electropermeabilization were analyzed during the electric field application using a rapid fluorescent imaging system. Exchanges of calcium ions through electropermeabilized membrane of Chinese hamster ovary cells were found to be asymmetrical. Entry of calcium ions during a millisecond pulse occurred on the anode-facing cell hemisphere. Entry through the region facing the cathode was observed only after the pulse. Leakage of intracellular calcium ions from electropermeabilized cell in low-calcium content medium was observed only from the anode-facing side. The exchanges during the pulse were mostly due to diffusion-driven processes, i.e., governed by the concentration gradient. Interaction of propidium iodide, a dye sensitive to the structural alteration of membrane, with cell membrane was asymmetrical during electropermeabilization. Localized enhancement of the dye fluorescence was observed during and after the pulsation on the cell surface. Specific staining of a limited anode-facing part of the membrane was observed as soon as the pulse was applied. The membrane fluorescence level increased during and immediately after the pulse whereas the geometry of the staining was unchanged. The membrane regions stained by propidium iodide were the same as those where calcium exchanges occurred. The fraction of the membrane on which structural alterations occurred was defined by the field strength. The density of defects was governed by the pulse duration. Electropermeabilization is a localized but asymmetrical process. The membrane defects are created unequally on the two cell sides during the pulse, implying a vectorial effect of the electric field on the membrane.     

Optimum Conditions for Electric Pulse-mediated Gene Transfer to Bacillus subtilis Cells

It was found that plasmid DNA (pUB 110) can be introduced into not only protoplasts but also intact cells of Bacillus subtilis by electric field pulses. The transformation of, B. subtilis using protoplasts results in an efficiency of 2.5 × 10⁴ transformants per μg of DNA, with a single pulse of 50 jisec with an initial electric field strength of 7kV/cm. Even transformation of intact B. subtilis cells results in a maximum efficiency of 1.5 × 10³ transformants per μg DNA, with a single pulse of 400 μsec with an initial electric field strength of 16kV/cm. The cell survival of protoplasts and intact cells was approximately 100% and 30%, respectively, under the conditions found to be optimal for the transformation process. Plasmid DNA isolated from pUB 110 containing transformants was indistinguishable from authentic preparations of pBU 110 on gel electrophoretic analysis.     

Correlation between electric field pulse induced long-lived permeabilization and fusogenicity in cell membranes.

Electric field pulses have been reported to induce long-lived permeabilization and fusogenicity on cell membranes. The two membrane property alterations are under the control of the field strength, the pulse duration, and the number of pulses. Experiments on mammalian cells pulsed by square wave form pulses and then brought into contact randomly through centrifugation revealed an even stronger analogy between the two processes. Permeabilization was known to affect well-defined regions of the cell surface. Fusion can be obtained only when permeabilized surfaces on the two partners were brought into contact. Permeabilization was under the control of the pulse duration and of the number of pulses. A similar relationship was observed as far as fusion is concerned. But a critical level of local permeabilization must be present for fusion to take place when contacts are created. The same conclusions are obtained from previous experiments on ghosts subjected to exponentially decaying field pulses and then brought into contact by dielectrophoresis. These observations are in agreement with a model of membrane fusion in which the merging of local random defects occurs when the two membranes are brought into contact. The local defects are considered part of the structural membrane reorganization induced by the external field. Their density is dependent on the pulse duration and number of pulses. They support the long-lived permeabilization. Their number must be very large to support the occurrence of membrane fusion.     

Electrical activation of mouse oocytes

Activation of the oocyte is the least efficient step in nuclear transplantation in the rabbit. We report the influence of age of oocytes, field strength, pulse duration and number, and shape of field on the rate of activation of mouse oocytes by electrical pulses. Regardless of oocyte age, activation rates were similar over a wide range of field strengths and pulse durations. Aged oocytes activated at a higher rate than recently ovulated oocytes (32 vs 3%), which lysed more frequently (13 vs 2%). Fragmentation rate was also higher among aged oocytes (42 vs 6%). The rate of activation increased with the number of pulses, from 9% with a single pulse, to 61% with six pulses. It also increased with the interval between pulses. Comparison of activation chamber geometries showed that the rate of activation was higher in a nonuniform field than in a uniform field and, for a particular field strength, varied from one electrode gap to another. These observations indicate that the rate of activation can be greatly increased by multiple electrical pulses. The activation rate also varied with consistent field strength in chambers with different electrode configurations.     

Transformation of Staphylococcus epidermidis and other staphylococcal species with plasmid DNA by electroporation

In this paper, the influence of various parameters on plasmid transformation by electroporation of Staphylococcus epidermidis Tü3298 was investigated. Cell growth conditions, various concentrations and forms of plasmid DNA, field strength, pulse duration and media for electroporation and regeneration were tested. In order to obtain optimal transformation efficiency, the cells were incubated for 30 min with DNA before pulsing. With the optimized procedure, other staphylococcal species such as S. aureus, S. staphylolyticus and S. carnosus were transformed with an efficiency up to 3 X 10(5) transformants per micrograms pC194 plasmid DNA.