Nucleotide sequence analysis of IS427 and its target sites in Agrobacterium tumefaciens T37

We have determined the nucleotide sequence of IS427, an insertion sequence from Agrobacterium tumefaciens T37, IS427 is 1271 bp long, contains 16-bp imperfect terminal inverted repeats, and generates a 2-bp target sequence duplication. It is present at three sites in the pTiT37 plasmid and is absent from the chromosome of A. tumefaciens T37. Each of the IS427 elements sequenced was near a site with sequence homology to integration host factor (IHF)-binding sites which suggested that IHF may be involved in IS427 transposition.     

Nucleotide sequence analysis of IS427 and its target sites inAgrobacterium tumefaciens T37

We have determined the nucleotide sequence of IS427, an insertion sequence fromAgrobacterium tumefaciens T37. IS427 is 1271 bp long, contains 16-bp imperfect terminal inverted repeats, and generates a 2-bp target sequence duplication. It is present at three sites in the pTiT37 plasmid and is absent from the chromosome ofA. tumefaciens T37. Each of the IS427 elements sequenced was near a site with sequence homology to integration host factor (IHF)-binding sites which suggested that IHF may be involved in IS427 transposition.     

The novel insertion sequences IS1417, IS1418, and IS1419 from Burkholderia glumae and their strain distribution

Three insertion sequences, IS1417, IS1418, and IS1419, were isolated from Burkholderia glumae (formerly Pseudomonas glumae), a gram-negative rice pathogenic bacterium, on the basis of their abilities to activate the expression of the neo gene of the entrap vector pSHI1063. The 1335-bp IS1417 element with 17-bp imperfect terminal inverted repeats was found to be flanked by 5-bp direct repeats of the vector sequence. IS1418 is 865 bp in length and carries 15-bp inverted repeats with a target duplication of 3 bp. The 1215-bp IS1419 sequence is bounded by the 36-bp terminal inverted repeats of the element and 7-bp direct repeats of the vector sequence. IS1417 and IS1418 belong to the IS2 subgroup of the IS3 family and the IS427 subgroup of the IS5 family, respectively, whereas IS1419 does not appear to be a member of any known IS family. Southern blot analysis of DNAs from B. glumae field isolates indicated that those IS elements are widely distributed, but the host range of the three IS elements appears to be limited to B. glumae and some other related species such as B. plantarii. The polymorphisms exhibited in B. glumae isolates suggest that those elements are useful for molecular epidemiological studies of B. glumae infections.     

Sequence and distribution of IS866, a novel T region-associated insertion sequence from Agrobacterium tumefaciens

We have identified a new insertion sequence, IS866, located in the auxin synthesis gene TA iaaH of Tm4, a wide host range biotype III octopine/cucumopine type Agrobacterium tumefaciens strain with two T regions on its tumor-inducing (Ti) plasmid, TA, and TB. IS866 is 2716 bp long, has inverted repeats of 27 bp with three mismatches, and generates 8-bp direct repeats upon integration. In addition to IS866, pTiTm4 carries two copies of a related element, IS867, associated with TA and TB, respectively. A systematic study of 92 virulent Agrobacterium strains has shown that among the three biotypes all octopine/cucumopine and vitopine biotype III isolates contain IS866-like elements. The various octopine/cucumopine Ti plasmids always carry IS866 and IS867 at the same position as in pTiTm4. The chromosomes of the bacteria which contain these Ti plasmids also carry IS866 and IS867 copies but in varying numbers and locations.     

Sequence and distribution of IS1312: evidence for horizontal DNA transfer from Rhizobium meliloti to Agrobacterium tumefaciens.

Two novel insertion sequences, IS1312 and IS1313, were found in pTiBo542, the Ti plasmid of Agrobacterium tumefaciens strains Bo542 and A281. Nucleotide sequencing and Southern hybridization revealed that IS1312 and IS1313 are homologous to Rhizobium meliloti ISRm1 and ISRm2, respectively. IS1312, ISRm1, and another Agrobacterium insertion sequence, IS426, belong to the same IS3 family of insertion sequences; however, IS1312 is more closely related to the Rhizobium ISRm1 than it is to the Agrobacterium IS426. The distribution patterns of these insertion elements and their sequence similarities suggest that IS1312 and IS1313 were horizontally transferred from R. meliloti to A. tumefaciens.     

Cloning and nucleotide sequence of the tzs gene from Agrobacterium tumefaciens strain T37.

The trans-zeatin secretion locus (tzs), from the nopaline Ti plasmid of Agrobacterium tumefaciens strain T37, was cloned and the nucleotide sequence determined. This gene is located in the virulence region of pTiT37. The tzs gene is responsible for the secretion of trans-zeatin into bacterial culture medium and in addition has the cytokinin biosynthetic activity, dimethylallylpyrophosphate:AMP dimethylallyltransferase. Sequence analysis showed an open reading frame of 729 nucleotides, capable of encoding a protein of 27,545 daltons. A single new labelled protein of 27,200 daltons was detected in Escherichia coli maxicells expressing the cloned tzs gene. Significant sequence homology was observed between the tzs and the published tmr sequence from pTiT37.     

Stimulation of Agrobacterium tumefaciens T-DNA transfer by overdrive depends on a flanking sequence but not on helical position with respect to the border repeat.

T-DNA transfer by Agrobacterium tumefaciens depends on the right border repeat of the T-DNA and is greatly stimulated by overdrive, an adjacent sequence. We report that the function of overdrive does not depend on helical position with respect to the border repeat. A synthetic 24-bp overdrive and a 12-bp region containing a fully conserved 8-bp core overdrive sequence stimulated virulence equally, but full function required additional bases to the left of the 24-bp sequence.     

Excision of IS492 Requires Flanking Target Sequences and Results in Circle Formation in Pseudoalteromonas atlantica

The gram-negative marine bacterium Pseudoalteromonas atlantica produces extracellular polysaccharide (EPS) that is important in biofilm formation by this bacterium. Insertion and precise excision of IS492 at a locus essential for extracellular polysaccharide production (eps) controls phase variation of EPS production in P. atlantica. Examination of IS492 transposition in P. atlantica by using a PCR-based assay revealed a circular form of IS492 that may be an intermediate in transposition or a terminal product of excision. The DNA sequence of the IS492 circle junction indicates that the ends of the element are juxtaposed with a 5-bp spacer sequence. This spacer sequence corresponds to the 5-bp duplication of the chromosomal target sequence found at all IS492 insertion sites on the P. atlantica chromosome that we identified by using inverse PCR. IS492 circle formation correlated with precise excision of IS492 from the P. atlantica eps target sequence when introduced into Escherichia coli on a plasmid. Deletion analyses of the flanking host sequences at the eps insertion site for IS492 demonstrated that the 5-bp duplicated target sequence is essential for precise excision of IS492 and circle formation in E. coli. Excision of IS492 in E. coli also depends on the level of expression of the putative transposase, MooV. A regulatory role for the circular form of IS492 is suggested by the creation of a new strong promoter for expression of mooV by the joining of the ends of the insertion sequence element at the circle junction.     

Nucleotide sequence analysis of IS256 from the Staphylococcus aureus gentamicin-tobramycin-kanamycin-resistance transposon Tn4001

Resistance to the aminoglycosides gentamicin, tobramycin and kanamycin (GmTmKmR) in Australian clinical strains of Staphylococcus aureus is commonly carried on the composite transposon Tn4001. The resistance gene aacA-aphD of Tn4001, which encodes a bifunctional AAC(6')-APH(2") modifying enzyme, is flanked by two 1324-bp inverted repeats, IS256L and IS256R, that are identical in sequence. Analysis of the IS256 sequence revealed structural features characteristic of IS elements including 26-bp imperfect terminal inverted repeats and a single open reading frame with coding capacity for a 45.6 kDa protein. The nucleotide sequence of IS256 described here, together with the sequence of the aacA-aphD gene reported previously [Rouch et al., J. Gen. Microbiol. 133 (1987) 3039-3052], completes the entire sequence of Tn4001, which totals 4566 bp.     

Nucleotide sequence of the tmr locus of Agrobacterium tumefaciens pTi T37 T-DNA.

The nucleotide sequence of the tmr locus from the nopaline-type pTi T37 plasmid of Agrobacterium tumefaciens was determined. Examination of this sequence allowed us to identify an open reading frame of 720 nucleotides capable of encoding a protein with a derived molecular weight of 27025 d. Comparison of the pTi T37 tmr sequence with the published sequence of the pTi Ach5 tmr locus shows over 88% homology in the 240 bases 5' to the translational initiation codon and over 91% homology in the coding sequences. The 3' nontranslated regions show less than 50% homology as expected for the 3' regions of divergent related genes. The possible significance of areas of conserved sequences, particularly in the 5' regulatory regions, is discussed.     

Is103, a New Insertion Element in Escherichia Coli: Characterization and Distribution in Natural Populations

IS103 is a previously unknown insertion sequence found in Escherichia coli K12. We have sequenced IS103 and find that it is a 1441-bp element that consists of a 1395-bp core flanked by imperfect 23-bp inverted repeats. IS103 causes a 6-bp duplication of the target sequence into which it inserts. There is a single copy of IS103 present in wild-type E. coli K12 strain HfrC. In strain X342 and its descendents there are two additional copies, one of which is located within the bglF gene. IS103 is capable of excising from within bglF and restoring function of that gene. IS103 exhibits 44% sequence identity with IS3, suggesting that the two insertion sequences are probably derived from a common ancestor. We have examined the distribution of IS103 in the chromosomes and plasmids of the ECOR collection of natural isolates of E. coli. IS103 is found in 36 of the 71 strains examined, and it strongly tends to inhabit plasmids rather than chromosomes. Comparison of the observed distribution of IS103 with distributions predicted by nine different models for the regulation of transposition according to copy number and of the effects of copy number on fitness suggest that transposition of IS103 is strongly regulated and that it has only minor effects on fitness. The strong clustering of IS103 within one phylogenetic subgroup of the E. coli population despite its presence on plasmids suggests that plasmids tend to remain within closely related strains and that transfer to distantly related strains is inhibited.     

Isolation and analysis of IS6120, a new insertion sequence from Mycobacterium smegmatis

Insertion sequence IS6120 from Mycobacterium smegmatis was identified by its ability to transpose into different sites in the lambda repressor gene, cl857, carried on an Escherichia coli/mycobacteria shuttle plasmid. IS6120 is a novel 1.5 kb insertion sequence, which has 24-bp imperfect terminal inverted repeats and generates 9-bp duplications of the target DNA following insertion. IS6120 is present in at least three copies in M. smegmatis but was not found in other species, including Mycobacterium tuberculosis. Nucleotide sequence analysis revealed that IS6120 contains two open reading frames, one of which encodes a putative transposase with similarities to those found in IS256 from Staphylococcus aureus, IST2 from Thiobacillus ferrooxidans, and ISRm3 from Rhizobium meliloti. The fact that IS6120 does not recognize a consensus target sequence for insertion and has no homologous sequences in the other strains studied makes IS6120 useful for transposon mutagenesis in mycobacteria.     

Characterization of insertion sequence IS892 and related elements from the cyanobacterium Anabaena sp. strain PCC 7120.

IS892, one of the several insertion sequence (IS) elements discovered in Anabaena sp. strain PCC 7120 (Y. Cai and C. P. Wolk, J. Bacteriol. 172:3138-3145, 1990), is 1,675 bp with 24-bp near-perfect inverted terminal repeats and has two open reading frames (ORFs) that could code for proteins of 233 and 137 amino acids. Upon insertion into target sites, this IS generates an 8-bp directly repeated target duplication. A 32-bp sequence in the region between ORF1 and ORF2 is similar to the sequence of the inverted termini. Similar inverted repeats are found within each of those three segments, and the sequences of these repeats bear some similarity to the 11-bp direct repeats flanking the 11-kb insertion interrupting the nifD gene of this strain (J. W. Golden, S. J. Robinson, and R. Haselkorn, Nature [London] 314:419-423, 1985). A sequence similar to that of a binding site for the Escherichia coli integration host factor is found about 120 bp from the left end of IS892. Partial nucleotide sequences of active IS elements IS892N and IS892T, members of the IS892 family from the same Anabaena strain, were shown to be very similar to the sequence of IS892.     

A new insertion sequence, IS231M, in an autoagglutinable isolate of Bacillus thuringiensis

An insertion sequence was isolated from an autoagglutinable strain of Bacillus thuringiensis. Analysis of its DNA sequence revealed high homology to the IS231 family. The name IS231M is proposed for this new insertion sequence. IS231M is 1652 bp long and is delimited by two imperfect 20-bp inverted repeat sequences with two mismatches, which are flanked by two perfect 11-bp direct repeats (DRs). The region upstream of the open reading frame, presumed to be able to form a stable hairpin structure, is particularly well conserved in IS231M. Based on primary nucleotide sequences, IS231M is most homologous to IS231F and IS231G and most distant from IS231V and IS231W. However, as opposed to the single transposase A ORF found in IS231A, -B, -C, -D, -F, and -G, IS231M has two overlapping open reading frames, ORF1 and ORF2, that could code for polypeptides of 334 and 143 amino acids, respectively. Whether IS231M is a functional transposable element remains to be determined.     

The inverted repeats of IS<Emphasis Type="Italic">1384</Emphasis>, a newly described insertion sequence from<Emphasis Type="Italic"> Pseudomonas putida</Emphasis> strain H,represent the specific target for integration of IS<Emphasis Type="Italic">1383</Emphasis>

Analysis of a region on plasmid pPGH1 from Pseudomonas putida strain H that is flanked by two copies of IS1383 has revealed an additional element with the typical features of a bacterial insertion sequence. This new IS element, designated IS1384, contains a single ORF of 972 bp, and is flanked by 9-bp inverted repeats. Based on sequence homology and structural characteristics of the putative transposase it encodes, IS1384 belongs to the IS5 subgroup of the IS5 family. Two copies of IS1384 are present on plasmid pPGH1, whereas none could be detected on the chromosome of P. putida strain H. Sequence analysis revealed the presence of two truncated copies of IS1384 on the second plasmid in this strain, pPGH2. The inverted repeats of all IS1384 copies (including the truncated ones) are interrupted by the integration of an IS1383 element. All integrations were found to be site- and orientation-specific. PCR studies and sequence data indicate that IS1383 can form a circular intermediate on excision. In the circular form, the previously described 13-bp inverted repeats of IS1383 are separated by 10 bp that are identical to the 5-bp motif that flanks each side of the element when it is integrated in its target. We provide evidence that these additional nucleotides, although not of inverted symmetry, represent an essential part of the inverted repeats. Furthermore, the data indicate that IS1383 integrated into the inverted repeats of IS1384 by a site-specific recombination rather than a site-specific insertion event.     

Local hopping of IS3 elements into the A+T-rich part of the high-pathogenicity island in Yersinia enterocolitica 1B, O:8

The high-pathogenicity island (Yen HPI) of Yersinia enterocolitica biogroup (BG) 1B strains is associated with mouse virulence. Three repeated sequences are clustered on the A+T-rich part of the Yen HPI downstream of the fyuA yersiniabactin receptor gene in Y. enterocolitica O:8 strains WA-314 and 8081. In addition to IS1328 and IS1400, the RS3 repeated sequence consists of a novel insertion sequence, IS1329, inserted into the remnants of IS1222. This partial IS retains both 44-bp inverted terminal repeats (ITRs) of IS1222 but has suffered deletions of different sizes in strains WA-314 and 8081. IS1329 is 1243-bp long, carries 25-bp imperfect ITRs and two consecutive orfs capable to encode 110-amino acid (aa) and 249-aa proteins, respectively. IS1329 is present only in BG 1B Y. enterocolitica strains. Similarly to IS1400, IS1329 and IS1222 belong to the IS3 group of mobile elements and seem to have preference for the 'local hopping' into the A+T-rich part of the Yen HPI. These insertion sequences may be responsible for the imprecise deletions of the Yen HPI in strain WA-314.     

Structural and genetic organization of IS232, a new insertion sequence of Bacillus thuringiensis.

In the Bacillus thuringiensis strains toxic for the lepidopteran larvae, the delta-endotoxin genes cryIA are frequently found within a composite transposonlike structure flanked by two inverted repeat sequences. We report that these elements are true insertion sequences and designate them IS232. IS232 is a 2,184-bp element and is delimited by two imperfect inverted repeats (28 of 37 bp are identical). Two adjacent open reading frames, overlapping for three codons, span almost the entire sequence of IS232. The potential encoded polypeptides of 50 and 30-kDa are homologous to the IstA and IstB proteins of the gram-negative insertion sequence IS21. The N-terminal part of the 50-kDa polypeptide contains a helix-turn-helix DNA-binding motif. The junctions at the insertion sites of three IS232 elements were analyzed. Each case was different, with 0, 4, or 6 bp of the target DNA being duplicated. Transposition of IS232 in Escherichia coli was demonstrated by using a genetic marker inserted upstream of the two open reading frames.     

Insertion element IS1 can generate a 10-base pair target duplication

Transposable element IS1 is known to generate mainly 9-bp and occasionally 8-bp target duplications upon transposition. We have isolated a plasmid pBR322 derivative having IS1 inserted into a site between the promoter and the structural gene for tetracycline resistance. DNA sequence analysis revealed that integration of this IS1 resulted in a 10-bp target duplication.     

Reactivation of insertionally inactivated Shiga toxin 2 genes of Escherichia coli O157:H7 caused by nonreplicative transposition of the insertion sequence

IS1203v is an insertion sequence which has been found in inactivated Shiga toxin 2 genes of Escherichia coli O157:H7. We analyzed the transpositional mechanism of IS1203v in order to investigate whether the Shiga toxin 2 genes inactivated by IS1203v could revert to the wild type. When the transposase activity of IS1203v was enhanced by artificial frameshifting, IS1203v was obviously excised from the Shiga toxin 2 gene in a circular form. The IS1203v circle consisted of the entire IS1203v, but an extra 3-bp sequence (ATC) intervened between the 5' and 3' ends of IS1203v. The extra 3-bp sequence was identical to a direct repeat which was probably generated upon insertion. Moreover, we detected the Shiga toxin 2 gene with a precise excision of IS1203v. In the wild-type situation, the transposition products of IS1203v could be observed by PCR amplification. These results show that IS1203v can transpose in a nonreplicative manner and that the Shiga toxin gene inactivated by this insertion sequence can revert to the wild type.