Diffusion in lipid bilayers containing barriers

In epithelial cells, a barrier or tight junction restricts the diffusion of lipid probes from the apical to the basolateral side of the outer membrane bilayer. This phenomenon is studied theoretically with the diffusion equation on planar and spherical surfaces. Two models for the tight junction are considered: a penetrable barrier embedded in a monolayer and an impenetrable obstacle in the outer membrane of a bilayer than must be bypassed by flip-flopping between inner and outer membranes. The rate of passing from one side of the cell to the other is calculated for each of these models under steady state conditions. The results are compared with recent fluorescent photobleaching recovery experiments. The theoretical interpretation indicates that it would be difficult to distinguish experimentally between the flip-flop case and the barrier crossing case. Assuming a flip-flop model, large differences in the magnitude of the flip-flop rates of probes are necessary to explain the experimental results as suggested by Dragsten et al. (Dragsten, P. R., R. Blumenthal, and J. S. Handler, 1981, Nature [Lond.], 294:718--722).     

Phase behavior of lipid bilayers under tension

Given the proposed importance of membrane tension in regulating cellular functions, we explore the effects of a finite surface tension on phase equilibrium using a molecular theory that captures the quantitative structure of the phase diagram of the tensionless DPPC/DOPC/Cholesterol lipid bilayer. We find that an increase in the surface tension decreases the temperature of the transition from liquid to gel in a pure DPPC system by ～1.0 K/(mN/m), and decreases the liquid-disordered to liquid-ordered transition at constant chemical potentials by approximately the same amount. Our results quantitatively isolate the role of tension in comparison to other thermodynamic factors, such as pressure, in determining the phase behavior of lipid bilayers.     

Spin-labelled sulfur containing neoglycolipids.

A neoglycolipid of structure beta-D-Glcp-S-(CH2)3N(OH)(CH2)4-O-cholest-5-en-3 beta-yl has been prepared in fair overall yield by reduction of the nitrone obtained by condensation of beta-D-Glcp-S-(CH2)3NHOH and OCH-(CH2)3-O-cholest-5-en-3 beta-yl. This synthetic procedure is very flexible, allowing a large range of lengths for the spacer arm, different positions for the NOH group along the spacer arm chain and the replacement of the sulfur by other bio-isosteric groups. The new neoglycolipid spontaneously oxidized to the corresponding nitroxide free radical whose EPR spectrum gave information on its conformational equilibrium which was further studied by molecular mechanics.     

Material property characteristics for lipid bilayers containing lysolipid.

The apparent area expansion modulus and tensile strength of egg phosphatidylcholine (EPC) membranes are measured in the presence of monooleoylphosphatidylcholine (MOPC). The apparent area expansion modulus decreases from 171 mN m-1 for pure EPC membrane to 82 mN m-1 for a membrane containing 30 mol % MOPC. This significant decrease of the apparent area expansion modulus is attributed to the change of the membrane area due to the tension-dependent exchange of MOPC between the bathing solution and the membrane. Similar to the apparent area expansion modulus, the tensile strength of the membrane decreases with the increase of the molar concentration of MOPC in the membrane. The tensile strength of pure EPC membrane is 9.4 mN m-1 whereas that for a membrane containing 30 mol % MOPC is only 1.8 mN m-1, and for a membrane containing 50 mol % MOPC it is even smaller, on the order of 0.07 mN m-1. The decrease of the tensile strength is coupled with a decrease of the work for membrane breakdown, which changes from 4.3 x 10(-2) kT for pure EPC membrane to 2 x 10(-6) kT for a membrane with 50 mol % MOPC. Overall, these results show that the decrease of the apparent area expansion modulus in the presence of exchangeable molecules is a fundamental property for all membranes and depends on the area occupied by these molecules. The method presented here provides a unique tool for measuring the area occupied by an exchangeable molecule in the bilayer membrane.     

Phase separation in lipid bilayers triggered by low pH

Endocytosis involves the capture of membrane from the cell surface in the form of vesicles, which become rapidly acidified to about pH 5. Here we show using atomic force microscopy (AFM) imaging that this degree of acidification triggers phase separation in lipid bilayers containing mixed acyl chains (e.g. palmitoyl/oleoyl) or complex mixtures (e.g. total brain extract) but not in bilayers containing only lipids with unsaturated chains (e.g. dioleoyl). Since mixed-chain lipids are major constituents of the outer leaflet of the plasma membrane, the type of phase separation reported here might support protein clustering and signaling during endocytosis.     

Synthesis of neosaponins and neoglycolipids containing a chacotriosyl moiety

Alpha-L-rhamnopyranosyl-(1-->4)-[alpha-L-rhamnopyranosyl-(1-->2)]-beta-D-glucopyranose (chacotriose) is the oligosaccharide moiety of dioscin. Chacotriosyl trichloroacetimidate was synthesized from d-glucose and l-rhamnose, and glycosylated to mevalonate (diosgenin, cholesterol, and glycyrrhetic acid) to yield dioscin and neosaponins. In order to simplify the structure of the aglycone part, the mevalonate moiety was replaced with double-chain neoglycolipids that mimicked glycosyl ceramides. A cytotoxicity test revealed the importance of the glycosidic linkage of the naturally occurring beta-form and that dioscin and the neoglycolipid with the longest chain showed a moderate activity.     

Optical and electrical properties of thin monoolein lipid bilayers

Summary Monoolein lipid bilayers were formed using a monolayer transfer technique and from dispersions of monoolein in squalene, triolein, 1-chlorodecane and 1-bromodecane. Measurements of optical reflectance and electrical capacitance were used to determine the thickness and dielectric constant of the bilayers. The thickness of the hydrocarbon region of the five bilayer systems ranged from 2.5 to 3.0 nm. Two of the bilayer systems (made from 1-chlorodecane and 1-bromodecane solvents) had a high dielectric constant (2.8 to 2.9) whereas the other bilayer systems had dielectric constants close to that of pure hydrocarbons (2.2). The charge-pulse technique was used to study the transport kinetics of three lipophilic ions and two ion carrier complexes in the bilayers. For the low dielectric constant bilayers, the transport of the lipophilic ions tetraphenylborate, tetraphenylarsonium and dipicrylamine was governed mainly by the thickness of the hydrocarbon region of the bilayer whereas the transport of the ion-carrier complexes proline valinomycin-K⁺ and valinomycin-Rb⁺ was nearly independent of thickness. This is consistent with previous studies on thicker monoolein bilayers. The transport of lipophilic anions across bilayers with a high dielectric constant was 20 to 50 times greater than expected on the basis of thickness alone. This agrees qualitatively with predictions based on Born charging energy calculations. High dielectric constant bilayers were three times more permeable to the proline valinomycin-K⁺ complex than were low dielectric constant bilayers but were just as permeable as low dielectric constant bilayers to the valinomycin-Rb⁺ complex.     

Transducin activation by nanoscale lipid bilayers containing one and two rhodopsins

Nanodiscs are nanometer scale planar membranes of controlled size that are rendered soluble in aqueous solution via an encircling amphipathic membrane scaffold protein "belt" (Bayburt, T. H., Grinkova, Y. V., and Sligar, S. G. (2002) Nano. Lett. 2, 853-856). Integral membrane proteins can be self-assembled into the Nanodisc bilayer with defined stoichiometry, which allows an unprecedented opportunity to investigate the nature of the oligomerization state of a G-protein-coupled receptor and its coupling to heterotrimeric G-proteins. We generated Nanodiscs having one and two rhodopsins present in the 10-nm-diameter lipid bilayer domain. Efficient transducin activation and isolation of a high affinity transducin-metarhodopsin II complex was demonstrated for a monodisperse and monomeric receptor. A population of Nanodiscs containing two rhodopsins was generated using an increased ratio of receptor to membrane scaffold protein in the self-assembly mixture. The two-rhodopsin population was isolated and purified by density gradient centrifugation. Interestingly, in this case, only one of the two receptors present in the Nanodisc was able to form a stable metarhodopsin II-G-protein complex. Thus there is clear evidence that a monomeric rhodopsin is capable of full coupling to transducin. Importantly, presumably due to steric interactions, it appears that only a single receptor in the Nanodiscs containing two rhodopsins can interact with G-protein. These results have important implications for the stoichiometry of receptor-G-protein coupling and cross talk in signaling pathways.     

Mechanical properties of lipid bilayers and regulation of mechanosensitive function

Material properties of lipid bilayers, including thickness, intrinsic curvature and compressibility regulate the function of mechanosensitive (MS) channels. This regulation is dependent on phospholipid composition, lateral packing and organization within the membrane. Therefore, a more complete framework to understand the functioning of MS channels requires insights into bilayer structure, thermodynamics and phospholipid structure, as well as lipid-protein interactions. Phospholipids and MS channels interact with each other mainly through electrostatic forces and hydrophobic matching, which are also crucial for antimicrobial peptides. They are excellent models for studying the formation and stabilization of membrane pores. Importantly, they perform equivalent responses as MS channels: (1) tilting in response to tension and (2) dissipation of osmotic gradients. Lessons learned from pore forming peptides could enrich our knowledge of mechanisms of action and evolution of these channels. Here, the current state of the art is presented and general principles of membrane regulation of mechanosensitive function are discussed.     

Optimizing and characterizing alignment of oriented lipid bilayers containing gramicidin D.

31P NMR spectroscopy and optical microscopy have been used to characterize samples of gramicidin D in oriented lipid bilayers. Correlations have been made between the defect structures observed under crossed polarizers by optical microscopy and characteristic features of 31P NMR spectra. The sample preparation protocol has been improved using these techniques to achieve minimal dispersion of the bilayer normal and minimal amounts of unoriented sample. The molar ratio of gramicidin to dimyristoyl-phosphatidylcholine, the extent of hydration, and the cosolubilizing solvent system were used as the protocol variables. While hydration level and solvent system had profound effects on the sample orientation the molar ratio did not. However, the 31P chemical shift anisotropy is very sensitive to the molar ratio and can be used as an in situ method for determining the molar ratio.     

Dibucaine effects on structural and elastic properties of lipid bilayers

In this work we report the interaction effects of the local anesthetic dibucaine (DBC) with lipid patches in model membranes by Atomic Force Microscopy (AFM). Supported lipid bilayers (egg phosphatidylcholine, EPC and dimyristoylphosphatidylcholine, DMPC) were prepared by fusion of unilamellar vesicles on mica and imaged in aqueous media. The AFM images show irregularly distributed and sized EPC patches on mica. On the other hand DMPC formation presents extensive bilayer regions on top of which multibilayer patches are formed. In the presence of DBC we observed a progressive disruption of these patches, but for DMPC bilayers this process occurred more slowly than for EPC. In both cases, phase images show the formation of small structures on the bilayer surface suggesting an effect on the elastic properties of the bilayers when DBC is present. Dynamic surface tension and dilatational surface elasticity measurements of EPC and DMPC monolayers in the presence of DBC by the pendant drop technique were also performed, in order to elucidate these results. The curve of lipid monolayer elasticity versus DBC concentration, for both EPC and DMPC cases, shows a maximum for the surface elasticity modulus at the same concentration where we observed the disruption of the bilayer by AFM. Our results suggest that changes in the local curvature of the bilayer induced by DBC could explain the anesthetic action in membranes.     

The physicochemical properties of cardiolipin bilayers and cardiolipin-containing lipid membranes

In this review article, we summarize the current state of biophysical knowledge concerning the phase behavior and organization of cardiolipin (CL) and CL-containing phospholipid bilayer model membranes. We first briefly consider the occurrence and distribution of CL in biological membranes and its probable biological functions therein. We next consider the unique chemical structure of the CL molecule and how this structure may determine its distinctive physical properties. We then consider in some detail the thermotropic phase behavior and organization of CL and CL-containing lipid model membranes as revealed by a variety of biophysical techniques. We also attempt to relate the chemical properties of CL to its function in the biological membranes in which it occurs. Finally, we point out the requirement for additional biophysical studies of both lipid model and biological membranes in order to increase our currently limited understanding of the relationship between CL structure and physical properties and CL function in biological membranes.     

Interfacial properties of phosphatidylcholine bilayers containing vitamin E derivatives

alpha-Tocopherol and alpha-tocopheryl succinate are biologically active lipids. The activity of these lipids may be related to how they affect membrane physical-chemical properties. Utilizing fluorescence methods, we have investigated the effect of alpha-tocopherol, alpha-tocopheryl succinate, and alpha-tocopheryl acetate on the properties of model membranes consisting of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine. In liquid-crystalline phase phospholipid bilayers, alpha-tocopherol decreased acyl chain mobility and decreased the interfacial polarity, but had no effect on the interfacial surface charge. In contrast, alpha-tocopheryl succinate had little effect on acyl chain motion or interfacial hydration, but increased the interfacial surface charge. alpha-Tocopheryl acetate had very little effect on any of the measurements of these bilayer properties. In a gel phase bilayer, alpha-tocopherol decreased acyl chain order, whereas alpha-tocopheryl succinate and alpha-tocopheryl acetate did not. Each alpha-tocopheryl derivative had a different effect on interfacial polarity, however, only alpha-tocopheryl succinate increased the interfacial surface charge. The acylation of alpha-tocopherol abolishes its antioxidant activity and generates molecules with different membrane physical properties. The non-polar acetate group of alpha-tocopheryl acetate locates this compound in a region of the bilayer where it has little effect on bilayer interfacial properties. The free carboxyl group of alpha-tocopheryl succinate is located in the interfacial region of the bilayer where it increases the membrane surface charge.     

Asymmetric glycerophospholipids impart distinctive biophysical properties to lipid bilayers

Phospholipids are a diverse group of biomolecules consisting of a hydrophilic headgroup and two hydrophobic acyl tails. The nature of the head and length and saturation of the acyl tails are important for defining the biophysical properties of lipid bilayers. It has recently been shown that the membranes of certain yeast species contain high levels of unusual asymmetric phospholipids consisting of one long and one medium-chain acyl moiety, a configuration not common in mammalian cells or other well-studied model yeast species. This raises the possibility that structurally asymmetric glycerophospholipids impart distinctive biophysical properties to the yeast membranes. Previously, it has been shown that lipids with asymmetric length tails form a mixed interdigitated gel phase and exhibit unusual endotherm behavior upon heating and cooling. Here, however, we address physiologically relevant temperature conditions and, using atomistic molecular dynamics simulations and environmentally sensitive fluorescent membrane probes, characterize key biophysical parameters (such as lipid packing, diffusion coefficient, membrane thickness, and area per lipid) in membranes composed of both length-asymmetric glycerophospholipids and ergosterol. Interestingly, we show that saturated but asymmetric glycerophospholipids maintain membrane lipid order across a wide range of temperatures. We also show that these asymmetric lipids can substiture of unsaturated symmetric lipids in the phase behaviour of ternary lipid bilayers. This may allow cells to maintain membrane fluidity, even in environments that lack oxygen, which is required for the synthesis of unsaturated lipids and sterols.     

Silica xerogel/aerogel-supported lipid bilayers: Consequences of surface corrugation

The objective of this paper was to review our recent investigations of silica xerogel and aerogel-supported lipid bilayers. These systems provide a format to observe relationships between substrate curvature and supported lipid bilayer formation, lipid dynamics, and lipid mixtures phase behavior and partitioning. Sensitive surface techniques such as quartz crystal microbalance and atomic force microscopy are readily applied to these systems. To inform current and future investigations, we review the experimental literature involving the impact of curvature on lipid dynamics, lipid and phase-separated lipid domain localization, and membrane-substrate conformations and we review our molecular dynamics simulations of supported lipid bilayers with the atomistic and molecular information they provide.     

Constant surface tension molecular dynamics simulations of lipid bilayers with trehalose

Surface areas and fluctuations evaluated from 50 ns molecular dynamics simulations of fully hydrated dipalmitoylphosphatidylcholine (DPPC) bilayers in a 1:2 trehalose:lipid ratio carried out at surface tensions 10, 17 and 25 dyn/cm/leaflet are compared with those of pure bilayers under the same conditions. Trehalose increases the surface area, as consistent with the surface tension lowering observed in simulations at constant area. The system bulk elastic modulus K _b  = 1.5 ± 0.3 × 10¹⁰ dyn/cm². It is independent of bilayer surface area and trehalose content within statistical error. In contrast, the area elastic modulus K _a shows a strong area dependence. At 64 Å²/lipid (the experimental surface area), K _a  = 138 ± 26 dyn/cm for a pure DPPC bilayer and 82 ± 10 dyn/cm for one with trehalose; i.e. trehalose increases fluidity of the bilayer surface at this area per lipid.